Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

vinyl bestsellers
ホーム  Equipment  Synth modules
Subscribe here to receive our weekly roundup of the latest studio equipment products

Filter

DJ機器

Synth modules

The Eurorack modular synth format is one of the most exciting areas of music technology. Pioneered by Doepfer, there are now hundreds of brands offering compatible modules of all varieties. You can combine your choice of the best oscillators, filters and much more in order to create a unique, bespoke synth setup which perfectly suits your needs. Eurorack modules offer the biggest range of options you can imagine, from basic analogue modules which replicate the sound of classic vintage synths, through to digital modules which allow you to explore completely new approaches to making music. Whether you’re a beginner or a more experienced modular head, you can take your pick of the best modules from leading brands including Mutable Instruments and ALM Busy Circuits. Our range also includes accessories, cases, patch cables and much more, allowing you to build and customise your perfect modular synth setup.
Synth modules
Options
150/569(ページ1/12)の商品
1  2  3  ...  12  »
2hp Bell Melodic Percussion Generator Module (black)
2hp Bell Melodic Percussion Generator Module (black) (digital/oscillator/synth voice synth module)
Cat: 725427 Rel: 03 Apr 19
 
Melodic percussion generator
Notes: Bell is a melodic percussion generator based on modal synthesis. By synthesizing the vibrations of complex geometric shapes, Bell provides a simple interface for creating metallic sounds that can both emulate acoustic instruments, and defy physics. Its sonic palette includes numerous physical models that span the range of vibraphone, marimba, glockenspiel and Tibetan bowls. In addition, damping allows for the articulation of all voices, and enables drastically changing the tone of your patch with a single knob turn.

It's time to ring your Bell!
Read more
out of stock $150.40
2hp Freez Voltage Controlled Locked Looper Module (black)
Cat: 686019 Rel: 04 May 18
 
Looper module for Eurorack synthesisers - 2HP
Notes: Freez is a voltage controlled locked looper. It captures moments of audio in buffers, where they can be minced and mangled beyond recognition. Once frozen, adjusting size will cause pitch and timbre changes to the locked audio.

Adjusting the sample rate control will distort and decimate the incoming audio as well as warp the time domain of the currently locked buffer. From beat repeat to granular audio buffer, Freez will create new sounds and textures out of any input signal.
Read more
out of stock $150.93
4ms EnvVCA Compact Analogue Envelope Generator Module (black)
4ms EnvVCA Compact Analogue Envelope Generator Module (black) (envelope generator/function generator/VCA synth module)
Cat: 913175 Rel: 08 Dec 22
 
A compact analogue envelope generator with a built-in low-noise exponential VCA.
Notes: The EnvVCA is compact analogue envelope generator with a built-in low-noise exponential VCA. It's a perfect companion to any VCO, whether you trigger it or self-cycle, and/or use the envelope output to modulate something else. With a wide time range from 30 minutes to 10kHz, it can be used as an LFO, slew limiter, audio or CV VCA, ASR/ADSR envelope generator, audio-rate oscillator, and more.

100% analogue

EnvVCA

8HP Eurorack format module
0.95" (24mm) maximum depth (includes power cable)
10-pin Eurorack power header

Power consumption
+12V: 83mA, -12V: 81mA

Audio/VCA
100k input impedance, 1k output impedance, DC-coupled
VCA gain range: -90dB to +0.9dB
DC to 20kHz, +/-0.1dB
VCA response to CV: exponential

Envelope Times
Minimum rise or fall time: ~50us (10kHz max frequency)
Maximum rise or fall time: >10 minutes (typically 15-20 minutes per segment)

Jacks:

Env jack:
when fall time > 11ms: Min = -5mV to +40mV, Max = +9.5V
when fall time < 11ms: Min = -200mV to -5mV, Max = +9.5V
Trigger jack: rising edge threshold = 2.5V
Cycle jack: rising edge threshold = 2.5V
Follow jack: active range = 0V to +5V
EOR jack: 0V to 5V gate output
Audio In/Out jacks: -10V to +10V maximum range without clipping
Read more
MRP:$167.24 SAVE 10%
out of stock $150.40
4ms Listen Four 4-Channel Stereo Mixer Module
4ms Listen Four 4-Channel Stereo Mixer Module (dual/stereo/mixer/panning/utility/preamp synth module)
Cat: 717580 Rel: 06 Feb 19
 
Four channel stereo mixer with line-level, modular-level & headphone outs
Notes: The Listen Four is a four channel stereo mixer with line, modular, and headphone outputs. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four can be daisy-chained to other Listen modules to create a larger mixer with sub-mix outputs.
Read more
 1 in stock $176.70
Click for better price!
or call +44 20 7424 1960
quote 717580
4ms Listen Four Quarters 4-Channel Stereo Mixer Module
4ms Listen Four Quarters 4-Channel Stereo Mixer Module (dual/stereo/mixer/panning/utility/preamp synth module)
Cat: 717581 Rel: 06 Feb 19
 
Four channel stereo mixer with balanced 1/4-inch & headphone out - 12HP
Notes: The Listen Four Quarters is a four channel stereo mixer with 1/4" (6.35mm) TRS balanced outputs and 1/8" (3.5mm) headphones output. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four Quarters can be daisy-chained to other Listen modules to create a larger mixer with sub-mix outputs.
Read more
out of stock $187.22
4ms Looping Delay Crystal-Clear Clock-Synced Delay Module (B-STOCK)
Cat: 969473 Rel: 01 Jan 90
 
B-STOCK: Box opened, but product is in excellent condition and in perfect working order
Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Crystal-clear clock-synced delay for loop up to 90 seconds, echoes, sound-on-sound, Karplus-Strong etc.

Features:
Loop or echo time is synchronized to a clock
87 seconds of delay/loop time maximum
48kHz/24-bit sampling rate, loop recorded at 16-bit (24-bit optional)
Extremely quiet, low noise and low jitter design
Tap tempo button and clock Ping input set the basis for one "beat"
Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
Sample-accurate clock output for perfect synchronization
Loop clock outputs for each channel
Time switches change range of Time knob from 1/8th notes up to 32 bars
Digital feedback, up to 110%
Delay Feed control, independent of dry/wet signal mix
Infinite Hold mode disables recording input and fixes regeneration at exactly 100%
Reverse mode plays memory contents backwards
With an infinite loop locked, knobs or CV can "window" around memory, by shifting the loop
Trigger inputs for toggling Infinite Hold and Reverse
Send and Return for applying effects to feedback with external modules
CV jacks to control Time, Level, Feedback and Dry/Wet Mix
16HP Eurorack module

Specs:
48kHz, 24-bit low-noise hi-fidelity
Up to 90 seconds of loop time
16HP
+12V: 110mA
-12V: 45mA

Included with the Looping Delay:
16-to-16 pin power cable
4 x M3 Knurlie screws
Read more
MRP:$278.74 SAVE 34%
 1 in stock $183.69
4ms Mini PEG Clock-Synced Envelope Generator & LFO Module
4ms Mini PEG Clock-Synced Envelope Generator & LFO Module (clock modulator/envelope generator/function generator synth module)
Cat: 901314 Rel: 29 Sep 22
 
The Mini PEG is a clock-synced envelope generator and LFO whose envelope times are set by the time between clock pulses or "pings".
Notes: The Mini PEG is a clock-synced envelope generator and LFO whose envelope times are set by the time between clock pulses or "pings". The Mini PEG is the latest version of the classic 4ms Pingable Envelope Generator.

Specs

Mini PEG
8HP Eurorack format module
0.95" (24mm) maximum depth (includes power cable)
16-pin Eurorack power header

Power consumption
+12V: 55mA
-12V: 30mA

Envelope Outputs
Maximum voltage range (ENV OUT): -9.4V to +9.4V
Maximum amplitude (ENV OUT): 9.5Vpp
Voltage range (5V OUT): 0V to +5V

Frequency range: +/-0.1dB DC to 1kHz, -1.0dB@2.5kHz, -2.0dB@4kHz
12-bit, 40kHz sample rate
Clock Range

Period range: 29.16 hours to 250us (4kHz)
CV Inputs (Div/Mult and Shape)

Voltage range: -5V to +5V
Gate Inputs (Ping, Trigger, Cycle)
Rising edge threshold: 2.5V
Read more
MRP:$177.76 SAVE 15%
 1 in stock $151.45
Click for better price!
or call +44 20 7424 1960
quote 901314
4ms Quad Clock Distributor Expander Module
Cat: 589491 Rel: 10 Dec 15
 
Expansion module for the Quad Clock Distributor - 12HP
Notes: Expansion module for the Quad Clock Distributor (QCD).
The Expander turns the QCD into a programmatic non-linear sequencer, allowing you to easily create everything from self-patched evolving rhythms, to swing/shuffle patterns, to classic dance beats.

Each of the four channels has:
* Multi-mode output jack INV OUT, which mirrors the tempo of main QCD output
* Mode Switch for each INV OUT jack:
--- Delayed Trigger Mode
--- Inverted Gate Mode
--- Shuffle Mode (delayed + original trigger)
* PW/Delay knob controls trigger delay time on INV OUT jack (or pulse width in Inverted Gate Mode)
--- Also controls Pulse Width of main QCD OUT jack
--- CV input jack for external control
--- Attenuverter allows for one channel to precisely modulate another channel's delay or pulse width
* Div/Mult CV attenuator knob
--- Controls how much the signal on the main QCD's Div/Mult CV jack will modulate the tempo
--- Useful for precisely modulating the speed of one channel with another

A global LED brightness trimpot is accessible from the front panel.

Dimensions
12 HP
25 mm deep

Current Draw
44 mA +12V
30 mA -12V
Read more
MRP:$206.16 SAVE 11%
out of stock $183.01
4ms Quad Clock Distributor v2 Quad Voltage Controlled Clock Multiplier/Divider Module
4ms Quad Clock Distributor v2 Quad Voltage Controlled Clock Multiplier/Divider Module (clock generator/clock modulator/CV modulation/frequency divider/quad/utility synth module)
Cat: 589490 Rel: 10 Dec 15
 
4 channel voltage controlled clock divider/multiplier synthesiser module with master tap tempo - 10HP wide
Notes: Four channel voltage controlled Clock Divider/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.

With a Tap Tempo button and five sync'ed clock outputs, the QCD is a versatile head-of-the-chain "Master" clock module, and/or a complex rhythmic pattern generator.
Read more
MRP:$230.35 SAVE 14%
out of stock $197.74
4ms Rotating Clock Divider v2 Clock Input Divider Module (silver)
4ms Rotating Clock Divider v2 Clock Input Divider Module (silver) (clock modulator/frequency divider synth module)
Cat: 589497 Rel: 09 Dec 15
 
Rotating Clock Divider (RCD) synthesiser module - 4HP wide
Notes: The Rotating Clock Divider (RCD) produces eight divided clock tempos from a single input clock. The divisions range from /1 to /64, including all odd and non-standard divisions such as /3 and /17 and /62. A Rotate CV input re-assigns the division number of each jack, allowing for creative mix-ups and experimentation. A Reset input jack helps to sync/start with an external clock.

Jacks:
- Clock Input (5V to 15V clock, rising edge triggered), max 3kHz
- CV Rotate (0V to +5V input)
- CV Reset (5V to 15V trigger)
- Divided Clock Outputs (8 jacks):
Divide-by-(1+R)
Divide-by-(2+R)
Divide-by-(3+R)
Divide-by-(4+R)
Divide-by-(5+R)
Divide-by-(6+R)
Divide-by-(7+R)
Divide-by-(8+R)
...where R is the CV Rotation.
- Selectable Gate/Trigger mode:
- Selectable Divide range up to Divide-by-64:
Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
- Selectable Auto-reset:
Auto-reset will reset the divide counter every 16/24/32 clocks, which keeps the beats more "dance-able" even when using the "weird" clock divisions (3/5/6/7/9/10/11/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
Read more
MRP:$194.59 SAVE 18%
out of stock $158.82
4ms Row Power 35 Power Solution For Eurorack Systems (white)
Cat: 739048 Rel: 29 Jul 19
 
Eurorack power supply module - 4HP
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
 1 in stock $153.04
Click for better price!
or call +44 20 7424 1960
quote 739048
4ms Row Power 45 Power Solution Module For Eurorack Systems
Cat: 785962 Rel: 12 Aug 20
 
Power solution module
Notes: Row Power is a clean, regulated, and protected power solution for Eurorack systems. Row Power 45 provides enough power for two to three typical Eurorack rows (typically up to about 312HP):
+12V @ 2.0A maximum, 1.5A recommended
-12V @ 1.4A maximum, 1.2A recommended
+5V @ 1.5A maximum, 1.2A recommended

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying bus cables or the Bus Stick. For custom power systems, the Row Power 45 has a set of easily soldered holes for using large gauge wire or MTA156 connectors to connect to distribution bus boards.

Multiple Row Power modules can be powered from a single power brick by daisy-chaining with an inexpensive barrel cable. The Row Power 45 can also be daisy-chained to 4ms Company's Pod enclosures. Each power supply is independently regulated and protected for ultra-low cross-talk between rows/pods.

The Row Power 45 is compatible with the 4ms Row Power Shield. This device (sold separately) attaches to the back of the Row Power 45 and monitors the amount of current being drawn, as well as the voltages of the power rails. The information is sent over Bluetooth to be displayed on a phone or tablet.

Electrical and Mechanical Specifications

Module Size:
4 HP Eurorack format module

Power Output:
Maximum average load under normal conditions: +12V @ 2.0A, -12V @ 1.4A, +5V @ 1.5A
Maximum average load under any condition: +12V @ 1.5A, -12V @ 1.2A, +5V @ 1.2A
Powered by laptop-style DC power supply: 2.1mm barrel, positive center, 15V-20V.

Included with the Row Power 45:
16-to-16 pin power cable
2 M3 Knurlie screws
Read more
 3 in stock $155.67
Click for better price!
or call +44 20 7424 1960
quote 785962
4ms SCM Plus Shuffling Clock Multiplier Module
4ms SCM Plus Shuffling Clock Multiplier Module (clock generator/clock modulator/frequency divider synth module)
Cat: 901317 Rel: 29 Sep 22
 
The SCM Plus is a clock multiplier with eight gate outputs and complex beat manipulation features.
Notes: The SCM Plus is a clock multiplier with eight gate outputs and complex beat manipulation features. It combines the classic Shuffling Clock Multiplier (SCM) and SCM Breakout (SCMBO) into a single module using higher precision hardware than its predecessors.

Specs:

Electrical and Mechanical Specifications

12HP Eurorack format module
0.95" (24mm) maximum depth (includes power cable)
16-pin Eurorack power header

Power consumption
+12V: 52mA max
-12V: 15mA

Clock Input
2.5V threshold
40kHz maximum

Clock Outputs
12V gate outputs, rise/fall time approximately 1us
40kHz maximum
Jitter (x1 output): max 30us < 120BPM, max 5us >= 120BPM
Latency (clock in to x1 output): 8us worst-case, 3.5us typical

CV Inputs:
Rotate, Slip: Knob attenuates jack signal. Full range: 0V to +3.3V
Shuffle, Skip, PW: Knob offsets jack signal. Full range: -5V to +5V
Gate Inputs:
4x Fast, Mute: 2.5V threshold. Button toggles state.
Read more
MRP:$205.11 SAVE 15%
 2 in stock $173.54
Click for better price!
or call +44 20 7424 1960
quote 901317
4ms Shifting Inverting Signal Mingler Eurorack Module
4ms Shifting Inverting Signal Mingler Eurorack Module (eurorack attenuator/CV modulation/logic/mixer/utility module)
Cat: 589485 Rel: 09 Dec 15
 
SISM: CV or audio attenuation, inverting, and shifting (DC offset), plus four mingled mixes - 12HP
Notes: The SISM is a 4-channel voltage manipulator that can scale, invert, attenuate, shift (dc offset), mix, split, and slice your CV and audio signals.

A plethora of red and blue LEDs (14) show exactly what each channel and output jack is doing: red = negative voltage, blue = positive.

Each channel is independent and has an input jack, output jack, a knob for attenuating/inverting (Scale), and a knob for applying positive or negative DC offset (Shift).

Four jacks on the bottom combine the four channels in different ways. Mix is a straight mix of all four shifted inputs, Switched Mix is a mix of all channels that have nothing plugged into the OUT jack, Positive Slice is the sum of all output voltages greater than zero volts, and Negative Slice is the sum of all negative voltages.

By Shifting some channels positive and some negative, the + Slice and - Slice jacks can be used as sub-mix outputs. Also, by running a slow triangle wave into one channel, the remaining channels can be made to "dirty pan" between the Slice jacks: the signals are half-wave rectified as they span between both outputs.

Channels 1+2 and 3+4 are normalized together on the input jacks, which is handy for splitting a signal into two or more altered forms. Jumpers on the back allow you to disable this normalization.

Each channel also has a jumper to make the Scale knob unipolar (no inverting, attenuate only). This is useful for mixing audio instead of CV. A breakout header allows for padding of the signal (useful for fine-tuning a precise voltage such as 1V/oct).

Input and Output headers for connecting to QCD, QPLFO, VCA Matrix, or other manufacturer's modules such as Toppobrillo Mixiplexer or Circuit Abbey Intermix.
Read more
out of stock $158.82
4ms Shuffling Clock Multiplier v2 Clock Modulator Module (silver)
Cat: 589498 Rel: 09 Dec 15
 
A clock multiplier module with "Groove" effects in 4HP.
Notes: The Shuffling Clock Multiplier (SCM) produces eight multiplied clock tempos from a single input clock, ranging from x1 to x8 (x32 by using the Breakout). Some of the outputs can be shuffled/swung. The amount of shuffle is controlled by a CV Slip jack. A Rotate CV jack re-assigns the multiplication number of each jack. More features of the SCM can be controlled by the SCM Breakout.
Read more
MRP:$184.07 SAVE 14%
out of stock $158.82
Abstract Data ADE-50 3x VCA Analogue Voltage Controlled Amplifier Module
Cat: 601496 Rel: 31 Oct 17
 
3 linear VCA's based on a discrete OTA core
Notes: The ADE-50 provides 3 all-analogue voltage controlled amplifiers based on a modern operational transconductance amplifier design.

The VCA's are designed to provide a good balance between the performance and specification of modern 'on-chip' VCA's and the character and musicality of classic analogue designs.

The OTA core of each VCA is fully discrete - it is built from only resistors, capacitors and transistors - however, the CV conditioning, audio input and output stages are built using high-quality op-amps giving the best balance between musicality, character and performance.

The ADE-50 provides a good signal-to-noise ratio, linearity, attenuation, an output level at unity gain at 5V CV input, minimal CV 'bleed' and minimal output offset/bias.
Read more
Tags: VCA module
 2 in stock $166.18
Click for better price!
or call +44 20 7424 1960
quote 601496
ACL FCVS-4 Quad Fader CV Source Module
ACL FCVS-4 Quad Fader CV Source Module (CV modulation/quad/utility module)
Cat: 857430 Rel: 10 Dec 21
 
Quad fader CV source module - 14HP
Notes: Superior 60 mm quad fader CV source including MUTE feature

The ACL Fader CV Source Module comprises 4 individual faders where each can generate a CV either going between 0 and +5V or 0 and +10V unipolar or -5V and +5V or -10V and +10V bipolar, selectable using 2 jumpers on the backside of the module.

Furthermore there are mute-switches for each channel accompanied with an dual color LED (green/red) which shows the channels mute status. When mute is activated or deactivated, short fade ramps will be generated as well as the fader itself is slightly slew-limited internally in order to generate a smooth CV.

This module is very useful to control VCA's or VC mixers like our VC Amp mix module.
Read more
 2 in stock $183.01
Click for better price!
or call +44 20 7424 1960
quote 857430
ACL Oktave CV & Octave Shifter Module
ACL Oktave CV & Octave Shifter Module (CV modulation/mixer/multiple module)
Cat: 673534 Rel: 26 Jan 18
 
Control Voltaged & octave shifter module - 6HP
Notes: The ACL Oktave is made with two main functions in mind - allowing you to transpose any sequence or melody up or down by up to four octaves, and to fine tune your signal up or down by nearly 7 semitones. It's great for quick melody transposition both on stage and in the studio, but naturally, we've made sure it can be used more imaginatively than that...

The module has three high impedance inputs, one low impedance inverting output and four low impedance non-inverting outputs. This configuration is made with the intention of controlling the pitch of up to four VCO modules simultaneously, but it also allows you to do more interesting things, like mix up to three incoming CV signals and add DC-offsets to them. And internal buffering means that more VCOs can be controlled simply by using a multiple module, such as the passive part of our Multi II.

Octave tuning is performed with a high quality nine-position rotary switch, spanning -4V to +4V, with 0V in the centre position.

Fine-tuning of the input mix is handled with the Tune potentiometer, with a range of a little less than + / - one fifth. This smooth linear control can be handy for correcting an out-of-tune input signal or deliberate creative offsetting.

To ensure precise and reliable octave tuning and offset adjustment with minimal errors, Oktave features precise on-board voltage reference, precision low-tolerance resistors, and low-noise/low DC-drift/Offset Operational Amplifiers.

Installation depth:

22 mm deep
Current Draw:

7 mA +12V
3 mA -12V
0 mA 5V
Read more
out of stock $152.51
ADDAC System ADDAC104 VC T-Networks Module
Cat: 776116 Rel: 08 Sep 20
 
4 voice module
Notes: Following the ADDAC103 T-Networks, this new module is also inspired by Twin T-Networks circuits used in many lengendary drum machines. A simple 4 voice module with frequency controls for each of the voices. This new module also features CV inputs with attenuverters for each voice Frequency. Due to the specificities of the circuit, and to keep the module at a low price, these inputs are not callibrated to 1v/octave.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.
Read more
out of stock $172.50
ADDAC System ADDAC106 T-Noiseworks Module (black)
Cat: 776120 Rel: 08 Sep 20
 
4 voice module
Notes: This is the last module in Addac System's T-Networks series, a straight forward 4 voice module with frequency and decay controls for each of the voices. As the name already unveils, a noise source has been added, and 2 different circuits have been created, that explore the timbre of a t-network when used to filter noise.

There are 2 different circuits in this module, voices 1 to 3 have a pre-vca t-network filter while in voice 4 the t-networks filter applied post-vca.

At each voice input there's a switch which sets which type of input to use, this signal will be used to control an internal VCA hence why the type of setting defined here is important:
1. Trigger - Any incoming CV will be converted into a 1ms trigger as soon as it crosses it's fixed threshold.
2. Mute - This disconnects then incoming signal effectivelly muting the voice.

3. Envelopes - This can be used with CV sources as well as Gate sources and simply follows the input signal.

This incoming signal will then be processed by a slew circuit which adds a decay factor allowing the user to set the "Tail" of each voice.

Trigger mode is mostly dedicated for percussive sounds while the Envelope mode is open to any external enve- lope control and able to control noise swooshes, swirls, crackles and pops simply out of t-networks filtered noise.

Audio inputs are also welcomed to be used as a Trigger/Envelope input.

Diferences between voices:
The first 3 voices also feature a Timbre selector switch: Hat/Snare
In Snare mode all frequencies coming from the t-networks filter pass thru to the output .
In Hat mode it adds a High Pass circuit which removes the mid/bottom frequencies (characteristic of the snare strike) creating a higher spectrum output which is closer to a Hat timbre.
All of these 3 voices are also differently tuned from each other to offer more timbrical options.

Voice 4 is closer to a typical t-networks circuit but this time peculiar one where the noise is gated by the vca and then sent through the t-networks filter.

Hat and Snare are terms used very looselly here, they are timbrical references and do not in any shape or form try to effectivelly replicate the complex timbres of a real world Hat or Snare.
Read more
out of stock $165.13
ADDAC System ADDAC106 T-Noiseworks Module (black) (B-STOCK)
Cat: 890685 Rel: 08 Sep 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


This is the last module in Addac System's T-Networks series, a straight forward 4 voice module with frequency and decay controls for each of the voices. As the name already unveils, a noise source has been added, and 2 different circuits have been created, that explore the timbre of a t-network when used to filter noise.

There are 2 different circuits in this module, voices 1 to 3 have a pre-vca t-network filter while in voice 4 the t-networks filter applied post-vca.

At each voice input there's a switch which sets which type of input to use, this signal will be used to control an internal VCA hence why the type of setting defined here is important:
1. Trigger - Any incoming CV will be converted into a 1ms trigger as soon as it crosses it's fixed threshold.
2. Mute - This disconnects then incoming signal effectivelly muting the voice.

3. Envelopes - This can be used with CV sources as well as Gate sources and simply follows the input signal.

This incoming signal will then be processed by a slew circuit which adds a decay factor allowing the user to set the "Tail" of each voice.

Trigger mode is mostly dedicated for percussive sounds while the Envelope mode is open to any external enve- lope control and able to control noise swooshes, swirls, crackles and pops simply out of t-networks filtered noise.

Audio inputs are also welcomed to be used as a Trigger/Envelope input.

Diferences between voices:
The first 3 voices also feature a Timbre selector switch: Hat/Snare
In Snare mode all frequencies coming from the t-networks filter pass thru to the output .
In Hat mode it adds a High Pass circuit which removes the mid/bottom frequencies (characteristic of the snare strike) creating a higher spectrum output which is closer to a Hat timbre.
All of these 3 voices are also differently tuned from each other to offer more timbrical options.

Voice 4 is closer to a typical t-networks circuit but this time peculiar one where the noise is gated by the vca and then sent through the t-networks filter.

Hat and Snare are terms used very looselly here, they are timbrical references and do not in any shape or form try to effectivelly replicate the complex timbres of a real world Hat or Snare.
Read more
out of stock $154.68
ADDAC System ADDAC212 EG Map Pack Module (black faceplate)
Cat: 776195 Rel: 08 Sep 20
 
VC attentuator/offset module
Notes: A 4 Channel VC Attenuator and Offset.

The ADDAC212 is a 4-channel VC attenuator and off-setter. It lets you deal with up to four parallel inputs as a single pack, modulating their amplitude and offset (± 10V) with the same control knobs, both with cv inputs and dedicated attenuators.

Features 4 parallel VCAs with the same amplitude and offset control knobs and cv inputs with dedicated attenuators.

Idealized to be the perfect companion for Envelope Generators, you can send 4 EGs through it and control the overall amplitude and offset of all 4 envelopes at once. This allows more control over the Envelopes when patching typical synth voices.
Read more
out of stock $196.69
ADDAC System ADDAC214 VC Rotator Module (black)
Cat: 776199 Rel: 08 Sep 20
 
VC rotator module
Notes: This is the VC Rotator, a stepped routing module for any type of signal (audio, cv, gate, trigger...)

Similar to a VC switcher but in this case there's the same number of inputs than outputs so, instead of 4 to 1 or 1 to 4, this module is always 4 to 4 but it can be patched for 2 to 2 and 3 to 3 step actions.

All four inputs get routed to the four outputs depending on the CV and Clock controls and are divided into 4 routing steps:
1. routes all inputs to the same number output: 1:1, 2:2, 3:3, 4:4
2. routes all inputs to an offset of 1: 2:1, 3:2, 4:3, 1:4
3. routes all inputs to an offset of 2: 3:1, 4:2, 1:3, 2:4
4. routes all inputs to an offset of 3: 4:1, 1:2, 2:3, 3:4

Direction determines if the clock input goes forward or backwards.
Going forward it can be set to 2-3 or 4 steps using the Rotate knob offset, going backwards always sync to 4 steps even if offseted by the Rotate knob.
For 2 & 3 step action input 1 is normalled to input 3 and input 2 is normalled to input 4.

Reset resets the internal clock to the first step.

Pendulum, external sequencing or any complex CV actions can be achieved using the CV input and dedicated attenuverter.

4 leds monitor which input is routed to output 1.
Read more
out of stock $191.43
ADDAC System ADDAC302 Nchunk Control Module (red faceplate)
Cat: 776295 Rel: 08 Sep 20
 
Control module
Notes: The ADDAC302 Nchunk Control module allows you to connect a Nintendo Nunchuck controller to your modular synth, featuring a two-axis thumb joystick, a three-axis accelerometer and two trigger buttons.

The module provides CV outputs for all of the Nunchuck's parameters and special functions to remap the CV outputs. The remapping can be both continuous or step-by-step and can be accessed through either the dedicated CV inputs or the manual controls.

A specially dedicated Mix output averages between the first two CV outputs, a very useful feature for continuous control parameters.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 4 cm

Control Voltage I/O:
- CV inputs: 0 - 10v
- CV outputs: 0 - 5v
- Gate in threshold: 2.5v

Electrical:
- Compatible with +-12v and +-15v power supplies
. Max current: 100mA?
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
$209.31 SAVE 20%
 1 in stock $167.46
ADDAC System ADDAC303 Muscle Sensing Module (black)
ADDAC System ADDAC303 Muscle Sensing Module (black) (clock generator/controller/envelope generator/external synth module)
Cat: 776297 Rel: 08 Sep 20
 
Muscle sensing module - 4HP.
Notes: Another addition to ADDAC300's Expressive Controls Series.

Preceded by the release of our ADDAC303 Muscle Sensing module this is the second module we make to take advantage of the physical body as a control source.

This module originated from a simple idea: using one's heart beat as a control source.

Using a clip-on sensor, that can be attached to a finger or an ear lobe, the user's heart rate will be aquired by sensing the blood flow passing under the sensor. This pulse will generate a trigger and an AD envelope.

Clip-on sensor will be provided with the module.

Features:
0 +5v Trigger output
0 +10v Envelope output with:
Attack, Decay, Amplitude and Offset controls
Two leds monitor the Trigger and Envelope Outputs

Dimensions
4 HP
35 mm deep

Current Draw
32 mA +12V
10 mA -12V
Read more
$204.06 SAVE 20%
out of stock $163.24
ADDAC System ADDAC307 Heart Sensing Module (black)
ADDAC System ADDAC307 Heart Sensing Module (black) (clock generator/controller/envelope generator/external synth module)
Cat: 776307 Rel: 08 Sep 20
 
Heart sensing module
Notes: Another addition to the ADDAC300's Expressive Controls Series.

Preceded by the release of the ADDAC303 Muscle Sensing module, this is the second module made to take advantage of the physical body as a control source.

This module originated from a simple idea: using one's heart beat as a control source.

Using a clip-on sensor, that can be attached to a finger or an ear lobe, the user's heart rate will be aquired by sensing the blood flow passing under the sensor. This pulse will generate a trigger and an AD envelope.

Clip-on sensor will be provided with the module.

Tech Specs:
4HP
3.5cm deep
60mA +12V
10mA -12V
Read more
out of stock $168.29
ADDAC System ADDAC604 Dual Filter Module
ADDAC System ADDAC604 Dual Filter Module (dual/stereo/filter synth module)
Cat: 776353 Rel: 08 Sep 20
 
Dual filter module
Notes: Really nice stuff here. The filter circuit from ADDAC's 4 Voice Cluster module gets reimagined as a multi-mode stereo or dual mono filter module. A lot of filter action in just 6hp.

Supplier's Notes:

While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V
Read more
out of stock $195.63
ADDAC System ADDAC604 Dual Filter Module (B-STOCK)
ADDAC System ADDAC604 Dual Filter Module (B-STOCK) (dual/stereo/filter synth module)
Cat: 967350 Rel: 01 Jan 90
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Really nice stuff here. The filter circuit from ADDAC's 4 Voice Cluster module gets reimagined as a multi-mode stereo or dual mono filter module. A lot of filter action in just 6hp.

Supplier's Notes:

While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V
Read more
out of stock $188.90
ADDAC System ADDAC605 VC Spectral Tilt Module (black faceplate)
Cat: 791268 Rel: 08 Oct 20
 
VC spectral tilt module
Notes: Two-channel spectral tilt filter with simple single-knob control and CV input. Adjust the frequency balance by turning the knob to emphasise highs or lows. Simple but effective way to add movement or stereo width.

Supplier's Notes:
The TILT EQ concept was first introduced in the 1970's by Quad Ltd, featured on the company's model 34 preamplifier.

The tilt control tilts the frequency spectrum of the audio signal by simultaneously boosting the treble and cutting the bass frequencies, or vice versa, making it a simple to use but powerful EQ.

As stated by Quad Ltd, it was designed to produce a very gradual change in balance across the musical spectrum without changing the overall subjective level.

This gradual fall from Bass to Treble, or vice versa, means there's no sudden change and hence no 'coloration' added to the sound, the sound will remain entirelly natural but with a slight added bottom or high end. In practice, it rotates most of the audio-range frequency response around a 1Khz axis, so as to change the overall balance of the sound from warm to cool without affecting either the apparent volume or the "color" of the sound.

Here this idea is introducedinto the modular world in a stereo configuration.

CV input with attenuverter was added for the Tilt control as well as a Spectral Motion switch that allows stereo spectral matching or inverted spectrum use of the Tilt control: Left=Right matches both channels direction, i.e. when left channel is tilted to the low end the right channel will also be tilted to the low end

Left Right inverts the Right channel spectrum, i.e. when left channel is tilted to the low end the right channel will be inverselly tilted to the high end, or vice-versa.

This possibility is extremmelly interesting when applied as a stereo effect, in other words a spectral EQ panner. This module will also be available as a full DIY kit.

Specs:
4Hp
4.5cm deep
40mA on each rail
Read more
out of stock $154.61
ADDAC System ADDAC701.REV2 VCO Voltage Controlled Oscillator Module (black)
Cat: 776357 Rel: 08 Sep 20
 
VCO module
Notes: This is our new VCO, we discontinued our ADDAC701 VCO a few years back and since we've been wanting to release a more stable version with better pitch tracking increasing pitch reliability further minimizing the detuning issues of analog VCO's.

For this new revision we chose to use the modern version of the CEM3340 ic from CoolAudio and add the triagle to sine circuitry of our previous VCO. This new version is extremelly stable over 7 octaves.

We also added a new Mix section which allows mixing of all waveforms controlled by 3 knobs SIN/TRI, MIX and SAW/RECT.

Tech Specs:
8HP
3.5 cm deep
60mA +12V
60mA -12V
Read more
MRP:$184.07 SAVE 10%
out of stock $165.13
ADDAC System ADDAC703 Discrete Mixer Module (black faceplate)
Cat: 776360 Rel: 08 Sep 20
 
Mixer module
Notes: Here's the second module of ADDAC System's 700's Heritage Series.

Inspired by Moog CP3 mixer, this is a totally discrete analog mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.

This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 3 cm

Electrical:
- Max current: 60mA.
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
- black screws
- black fibre washers
Read more
out of stock $196.69
ADDAC System ADDAC708 Michel Waiswisz's Cracklebox Module (limited edition)
ADDAC System ADDAC708 Michel Waiswisz's Cracklebox Module (limited edition) (controller/envelope generator/noise synth module)
Cat: 958668 Rel: 14 Sep 23
 
Michel Waiswisz's Cracklebox in a modular format - 12HP.
Notes: Introducing a limited edition re-release of this iconic electronic instrument in a modular format.

This limited edition of 75 units is a tribute to the pioneering work of Dutch musician and instrument maker Michel Waiswisz (1949 - 2008), who first invented the Cracklebox with Geert Hamelberg in the late 1960s.

The Cracklebox was a small, handheld device designed as a way to explore new sonic territories. It was one of the first electronic musical instruments to use circuit bending techniques in the creation of electronic music. It allowed musicians to manipulate and control electronic circuits in real-time, creating a wide range of unique and experimental sounds. He used a circuit from a toy piano as the basis for the instrument, and then added a series of touch-sensitive pads that were connected to the circuit. When a player touched one of the pads, the circuit would be completed, producing a crackling sound.

The Cracklebox was probably the first commercially available portable self-powered alternative 'keyboard' analogue electronic instrument with inbuilt loudspeaker.

In the 1970s about 4000 Crackleboxes were built and sold by STEIM in Amsterdam.

Nowadays many people refer to the The Cracklebox as the archetype of 'glitch' or 'circuit bending'.

In the decades since its invention, the Cracklebox has continued to be an important and influential instrument in the world of electronic music. It is still in use today, and is considered a classic example of the potential of electronic music to create unique and innovative sounds.

This Eurorack recreation includes a 9v battery, swappable through the front panel, this allows to isolate the current flowing through the user's fingers from the Eurorack frame PSU, protecting the user from undesired electrical shocks. The internal speaker has been removed, a transformer has been used instead to isolate the output signal.

The output generated can be used as an audio, as a gate or a cv signal, when using it as a cv source, due to the specific qualities of the signal, users may want to send it through other modules as slews, sample and holds, quantizers to tame/control it's peculiar cv output.

Controls:

- The module features an on/off switch to turn off the 9v battery (remember to turn it off when you turn off your Eurorack system).
- A Power Starve knob, reduces the 9v voltage feeding the circuitry changing it's overall timbre/pitch
- An Output Gain knob to control the output volume.
- A Boost switch to add more presence to the signal.

Tech Specs:

12HP
5.5 cm deep
20mA +12V
20mA -12V
9v battery required
Read more
 1 in stock $160.92
Click for better price!
or call +44 20 7424 1960
quote 958668
ADDAC System ADDAC710 Balanced Outputs Module
ADDAC System ADDAC710 Balanced Outputs Module (dual/stereo/external/utility synth module)
Cat: 904670 Rel: 19 Jan 23
 
ADDAC710 is a dual channel Isolated DI box and is all about keeping the sound coming from your Modular free from any undesired noisy interferences, making sure that what you’re getting from your outputs is what your Modular is actually producing.
Notes: ADDAC710 is a dual channel Isolated DI box and is all about keeping the sound coming from your Modular free from any undesired noisy interferences, making sure that what you're getting from your outputs is what your Modular is actually producing. It provides galvanic electrical isolation between the Modular system and external sources preventing impedance mismatch and ground loop induced hum. ADDAC's 710 circuit is designed around a unity 1:1 type Low-cost Audio Transformer operating in the 20 Hz to 20 KHz range, this impedance matching transformer provides two fully balanced outputs (via XLR connectors). ADDAC710 is a low-cost alternative to the ADDAC800X High-End Outputs module, we redesigned the original circuit using a smaller low-cost transformer that also reduced its depth allowing it to fit shallow Eurorack cases.

There are two independent channels on the module with:

Audio Input

LIFT/FLOAT/GND toggle switch
Signal overload warning led
XLR Output

The LIFT/FLOAT/GND 3-way switch lets you choose between lift, ground or floating ground.
In the LIFT position (left) the module circuit will be "lifted" to ground through a 100R resistor and a 10nF capacitor.
In the FLOAT position (middle) Ground will not be shared leaving ins and outs grounds completely apart from each other fully isolating both signals. in the GND position (right) Ground will be shared between inputs and outputs, here no isolation is used.
Any of these three positions may be the best form of avoiding ground loops or any other undesired interference occurring between your modular and the sound system you're plugging it into. Try out which one of these options will work best in any given situation.

Tech Specs:

6HP
4 cm deep
40mA +12V
40mA -12V

The importance of using Audio Transformers
Applying a transformer balanced output isolation has lots of advantages over other less expensive ways for dealing with ground loop issues. This method provides the chance to set a very simple and clean circuit in which the signal transfer process develops smoothly and humming free. The transformer is a device that performs both signal balancing and high-to-low (or vice-versa) impedance conversion, while rejecting straggled DC voltage and Radio Frequency Interference from signal passing through a magnetic bridge. In a transformer, two (or more) coils (called windings) of insulated wire wound around a magnetic metal core allow for its input(s) and output(s) not to be physically connected together. When an AC signal passes through the input winding (the primary), a perfectly related AC signal appears on the output winding (the secondary). This way, by the fact that signal flows via inductive coupling between the two windings of the transformer, this module presents a most accurate electrical isolation between its input and output. A same number of windings on each coil guarantees that there's no gain loss when audio signal passes from the primary to the secondary windings. Furthermore, since these two windings are insulated from each other, the transformer will electrically isolate ADDAC710 from any other device, preventing hum problems coming from an outsider ground. Being a low-cost transformer the frequency response curve is not as linear as our 800X, still the -0.2dB attenuation at 50Hz feels negligible.

Phantom Power

+48V Phantom Power is NOT needed for the module to operate.
In any case having Phantom Power ON won't influence the module operation.
Read more
 3 in stock $168.29
ADDAC System ADDAC712 Vintage Pre 2-Channel Discrete Gain Staging Amplifier Module
Cat: 917638 Rel: 27 Jan 23
 
ADDAC712 is a dual channel discrete gain staging ampli- fier, based on a famous discrete preamp board from the 70’s used in some legendary equipment.
Notes: ADDAC712 is a dual channel discrete gain staging amplifier, based on a famous discrete preamp board from the 70's used in some legendary equipment.

What was eye-catching was the character of its clipping and resulting saturation/distortion.

The module can be used with modular signals to add a distortion/fuzz character or as a preamp for an external source such as a line source, keyboard, guitar...

It's also a great side companion for our ADDAC711 Balanced Inputs.

At the top an On/Off [BYPASS] switch routes the signal into the Effect (Up: Active) or to the bottom output gain stage (Down: Bypassed).

The amount of amplification is set by the [GAIN] control, the maximum amount of amplification can be set by the user using the [MAX GAIN] trimmer.

Up to +/-5.5v the incoming signal will keep it's integrity, beyond this point saturation will start to increase.

At approx. +/-6v a hard clipping will start to occur, this clipping also has a particular quality that at extreme levels it drifts the audio 0v bias reference, moving it upwards which results are similar to a Gate effect.

In the middle, an x2 opamp based output gain stage with a clipping led, which monitors the clipping at the output, and an [OUTPUT] control to set the output volume.

Having the top and middle gain stages provides flexibility allowing the user to completely distort the signal on the top stage and tame it's output level with the second stage.

At the bottom, Input and Output for both channels (Left input is normalled into Right input).

Tech Specs:
6HP
4 cm deep
40mA +12V
40mA -12V
Read more
 1 in stock $169.34
Click for better price!
or call +44 20 7424 1960
quote 917638
ADDAC System ADDAC713 Stereo Discreet Mixer Module (B-STOCK)
ADDAC System ADDAC713 Stereo Discreet Mixer Module (B-STOCK) (distortion/dual/stereo/mixer/panning synth module)
Cat: 944637 Rel: 01 Jan 90
 
B-STOCK: Box opened, but product is in excellent condition and in perfect working order
Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Inspired by the legendary Moog CP3 mixer, the 713 tweaks the old-school discrete circuits into three stereo inputs and one mono channel, summing to stereo with adjustable feedback and clipping to add character.

Supplier's Notes:
ADDAC713 is the stereo version of ADDAC System's 703 Discrete Mixer.

Inspired by Moog's CP3 mixer, this is a fully discrete analogue mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.

This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.

This new version was initially thought of as a percussion mixer, with mono inputs and panning, to allow placing percussive voices in the stereo field, while keeping channel 4 in mono for low end sources like a kick drum or Bass. In the development process ADDAC System slightly changed this initial idea, adding stereo inputs for the first 3 channels, but still kept the 4th channel in mono.

All four [GAIN] controls go to extreme levels, the first 3channels also feature [PAN] controls. Feedback is used to overdrive the whole mix. As the control is turned clockwise the sound will be clipped harder until it goes completely off, this happens as feedback is increased the audio bias reference also moves up, at extreme levels it offsets the whole signal upwards until it completely goes above the top rail clipping the whole signal hence the resulting gate effect.

The [MASTER OUTPUT] sets the overall output gain of the mixer, the two leds monitor the audio output signal. The Soft clipping switch engages an anti-click circuit which adds a low pass before the output, the switch allows 3 states: Soft low pass / Off / Hard low pass.

Features:

Three channels with stereo inputs, gain and pan knob
One channel with mono input and gainknob
Feedback/gate knob
Master output volume knob
Soft clipping switch
Two Led Monitors for Left and Right channels

Tech Specs:

8HP
4cm deep
80mA +12V
80mA -12V
Read more
 2 in stock $193.41
ADDAC System ADDAC714 Vintage Clip 2-Channel Soft Clipping Module
ADDAC System ADDAC714 Vintage Clip 2-Channel Soft Clipping Module (distortion/dual/stereo/dynamics/effect/filter synth module)
Cat: 917651 Rel: 27 Jan 23
 
Dual channel soft clipping module in 6HP.
Notes: ADDAC714 is a dual channel soft clipping module.

Diode based passive clipping acts as a "brick wall" limiter with a fixed knee given by the inherent diode physics. A passive RC low pass circuit adds a 3.3KHz -3db low pass filter which sculpts the overall tone while also adding further character to the effect.

At the top an On/Off [BYPASS] switch routes the signal into the Effect (Up: Active) or to the bottom output gain stage (Down: Bypassed).

The amount of clipping is set by the [GAIN] control, it mostly works as a threshold control for how much clipping will be applied.
As more clipping is applied the signal's amplitude will also decrease, to compensate for this we set up a gain compensation stage to keep the output amplitude balanced across the Gain range.

Symmetry chooses between bipolar clipping or positive clipping, this relates to the harmonics generated, bipolar for odd and even harmonics (up position) and unipolar for odd harmonics only (down position).

At the second stage, an opamp based x2 output gain with a clipping led, which monitors the clipping at the output, and an [Output] control to set the output volume.

Having the top and middle gain stages provides flexibility allowing the user to completely distort the signal on the top stage and tame it's output level with the second stage.

At the bottom, Input jacks for both channels (Left input is normalled into Right input) and output jacks

Tech Specs:
6HP
4 cm deep
40mA +12V
40mA -12V40mA +12V
40mA -12V
Read more
 2 in stock $157.24
Click for better price!
or call +44 20 7424 1960
quote 917651
ADDAC System ADDAC805.VS2 VC Signal Router Module
ADDAC System ADDAC805.VS2 VC Signal Router Module (attenuator/dual/stereo/mixer/panning/utility/VCA synth module)
Cat: 776432 Rel: 08 Sep 20
 
Signal router module
Notes: Inspired by our ADDAC701 VCO waveform mixing section, our new VC Signal Router also updates our legacy X-Fade/Panner to a stereo configuration that also allows 4 quadrant mixing.

Featuring two dedicated X-faders and a stereo VCA that can also be used as a third X-Fader. All controls have their own CV inputs and dedicated Attenuverters for precision control.

4 quadrant mixing is achieved by using the stereo Master as a X-fader between left and right channels, this way you can plug 4 audio sources and sweep/crossfade between each and any of them using the 3 x-faders. Plug any 4 sources (4 waveforms of a VCO, 4 LFOs, 4 envelopes...) and sweep through morph through or have them all mixed together.

For other configuration types Left and Right X-fader channels can be routed through the Master stereo VCA or sent directly to the outputs. A stereo Direct input can also be routed through the Master VCA or sent straight to the outputs.

The Mono Sum output always mix Left and Right outputs together allowing the possibility to use the module as a peculiar 6 channel mono mixer.

It can be used for both Audio or CV Signals.

Tech Specs:
8HP
4.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$188.28 SAVE 11%
out of stock $167.23
FORTHCOMING
ADDAC System ADDAC813 Stereo Mixer+ Module
Cat: 1007268 Rel: 30 Jun 24
 
4-channel stereo mixer module - 8HP
Notes: ADDAC813 is a straight forward stereo mixer. Featuring 5 stereo channels, 4 of them with attenuators, a mono send/return path for parallel processing plus stereo and mono outputs

Four channels with stereo input and gain knob. Fifth channel with stereo input without gain knob, which are the prefered inputs to cascade several ADDAC813s when more channels are needed. Master Output controls the level of the Inputs mix. Two LEDs monitor the inputs mix.

Mono Send / Return return path allows for easy integration of mono effects in a stereo chain. Plug your favorite module through it (filter, bbd delay, spring reverb...) or any mono pedal.

The Return Gain works in parallel with the Master Output, just like regular wet / dry controls.

The send output can be configured to be line or synth level via a jumper in the back.

Stereo output sums the Inputs Mix with the Return signal.

The Mono output is the sum of Left and Right outputs

Effect Pedals

Using the send output at Line level, the user can connect the send output directly into mono effect pedals and have the pedals output connected directly into the return input without the need of an attenuator/amplifier module.

Tech Specs:
8HP
4 cm deep
50mA +12V
50mA -12V
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Jun 24 $171.44
(No payment required now - pay when released)
After Later Audio Alan 1U Micro Turing Machine Module (black/gold)
After Later Audio Alan 1U Micro Turing Machine Module (black/gold) (CV modulation/noise/random/sequencer synth module)
Cat: 910098 Rel: 21 Nov 22
 
Alan 1U (micro Turing Machine)
Notes: The randomness of the Music Thing Modular Turing Machine, in the Intellijel 1U format. Alan retains all of the same functionality as the original including the connectors for the expanders.

While this module has little to do with the original Turing Machine (by Alan Turing), it is a shift register based sequencer. You cannot program this sequencer, instead it builds random sequences that can be locked in.

Alan comes tested, calibrated and ready to bring random voltages.

Three good resources for getting started with Alan:

DivKid’s video on the Turing Machine
David’s video the Alan
Turing Machine manual
Based on open source design by Tom Whitwell under Creative Commons (CC-BY-SA) license.

Width: 21hp
12V: 45mA
-12V: 20mA
Module power connector can be connected either way
Read more
out of stock $187.22
After Later Audio Alan Random Looping Sequencer Module
After Later Audio Alan Random Looping Sequencer Module (CV modulation/random/sequencer synth module)
Cat: 805272 Rel: 14 Jan 21
 
Register-based sequencer module
Notes: Alan (micro Turing Machine) Shift Register Based Sequencer

The randomness of the Music Thing Modular Turing Machine, shrunk down to 6HP. Alan retains all of the same functionality as the original including the connectors for the expanders.

While this module has little to do with the original Turing Machine (by Alan Turing), it is a shift register based sequencer. You cannot program this sequencer, instead it builds random sequences that can be locked in.

Alan comes tested, calibrated and ready to bring random voltages.

The After Later Audio panel is black and gold and made from FR4. The package will include a power/ribbon cable and a one year warranty.
Read more
out of stock $176.71
After Later Audio Atom 18HP Elements Redesign Module (B-STOCK)
Cat: 851583 Rel: 14 Jan 21
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


This is a new build of a micro Mutable Instruments Elements. It features jack lights that can be turned on/off via a jumper on the back. This module comes loaded with the most recent firmware, with the new Chords mode that unlocks a whole new world of potential.

These modules use tall bushing potentiometers to offer a more stable feel. You can see the difference in the last picture. You will feel much less wiggle with the tall bushing (left) than with traditional trimmer style (right).

The module is fully assembled, tested, and calibrated. Eurorack power cable is included.
Read more
out of stock $196.04
After Later Audio Baker Peaks Redesigned Module
After Later Audio Baker Peaks Redesigned Module (enveolpe generator/LFO/drum synth module)
Cat: 805024 Rel: 14 Jan 21
 
Peaks with CV inputs and attenuverters in 6HP.
Notes: A 6HP version of Mutable Instruments Peaks that adds CV inputs and attenuverters for each of the four parameters.

It can be an ADSR-style envelope generator, an LFO and a drum emulator. By default, the Dead Man's Catch (DMC) firmware will be loaded, which adds the Alt ENV, ALT LFO, ALT Tap, Alt Drum modes below.

The module is calibrated, comes with a power cable, and a one year warranty.

Additional Dead Man's Catch firmware modes:

Basic (original modes):

Envelope
LFO
Tap LFO
Bass/Snare Drums

Alternative ENV:

Double attack envelope
Repeating attack envelope
Looping envelope
Randomized AD envelope
Bouncing ball envelope

Alternative LFO:

Frequency-modulated LFO (folded sine FM)
Frequency-modulated LFO (random FM)
Varying wave shape LFO ( folded sine WS mod)
Varying wave shape LFO ( random WS mod)
Phase-locked loop oscillator

Alternative TAP Mini-sequencer:

ModSequencer
Pulse Shaper
Pulse Randomizer
Turing Machine
Bytebeats

Alternative DRUM:

FM drum Generators
Randomized bass and snare drum generators
Randomized high hat
Read more
out of stock $172.49
After Later Audio Barback Mixer Expander Module For Bartender
After Later Audio Barback Mixer Expander Module For Bartender (mixer/dual/stereo/panning/VCA/expander module)
Cat: 1004405 Rel: 11 Mar 24
 
Mixer expander module for Bartender
Notes: Two channel expander for Bartender

Mixer section

Each channel has the following:

Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.

CV inputs for both panning and level control

Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.

Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.

Cue bus - You can route each channel to the cue bus.

Expandable Mixer Series

Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.

Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.

Send-VCA can be added for CV control of the level of the send.

DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 10hp
12V: 125mA
-12V: 100mA
Read more
 2 in stock $163.82
Click for better price!
or call +44 20 7424 1960
quote 1004405
After Later Audio Cascades Through Zero FM Oscillator Module
After Later Audio Cascades Through Zero FM Oscillator Module (LFO/oscillator/waveshaper synth module)
Cat: 900359 Rel: 20 Sep 22
 
Cascades is our most fully featured analogue oscillator.
Notes: Cascades is After Later Audio's most fully featured analogue oscillator. Some of the unique features are:

Through zero FM oscillator
Morph output with CV control to morph between TRI, SAW and PUL waves.
Octave switch to simplify tuning
Cosine output - fun for stereo - also for going full analogue quadrature with the SUM+INV module
VCO and LFO ranges
Amplitude modulation built-in with either offset or full wave rectification for the modulating wave.
Switchable mod wave output between morph out and SIN (jumper on back)

Two notes:

The COS output can only be tuned to work with either the VCO or LFO range. At the "factory", After Later Audio have tuned it for VCO usage. Stay tuned for tuning instructions if you would prefer to use it for LFO range.

The chip used for the core of this module is the SSI2130, which has a tendency to lock up on startup when the power rails come up asymmetrically, which is most common in Intellijel power supplies. If the unit does lock up on startup, just flip the LFO/VCO switch to get it behaving.

COCO - Create your Own Complex Oscillator

With COCO system the aim is to bring all the goodness of a complex oscillator while aiming to minimize some of the downsides. The main thing that I appreciate about them is that you can have a lot of fun without having to patch too much. By default, you can get some very deep sounds that go far beyond the standard bleep and bloop. On the downside, complex oscillators are big and have a fixed set of capabilities.

The COCO system allows you to choose your oscillator features and choose your control module and connect them all together into a complex oscillator. You can then break them down and each module also works as a standalone module as well. So when you need that extra oscillator for your performance case, you can break the system down and use it accordingly.

Oscillators

You can connect up to a total of three oscillators in a complete COCO system. It is recommended to have at least two or it will not be much fun as a system. The typical configuration would be having one Cascades and two Brooks.
Each oscillator in the COCO series can send and receive Exp FM, sync, and a MOD bus.

For Exp FM (v/oct) and sync, the routing is controlled by the control module via the Track and Sync switches. The exp FM routing is handy for doing chords without having to worry about copying precision voltages. Everything is internally routed with high precision op amps.

MOD wave - Each oscillator controls what it sends as a modulation wave. Cascades has a jumper on the back to change between SIN and MOR outputs, while Brooks will always send SIN. Each oscillator then has an arrow next to each jack that receives a MOD wave signal. One twist on this is that Canyon can also be configured to send it's mix output as the MOD wave to OSC1, instead of receiving from OSC2. This is because the stepped voltage patterns that come from Canyon can be quite fun to use on an oscillator!

Cascades - Cascades is the fully featured thru-zero oscillator with an octave switch, voltage-controlled wave shaping (via Morph), amplitude modulation, along with a large variety of waveform ouptuts. A notable oddity is the inclusion of the COS output, which is great for some stereo effect. The idea being that Cascades works best as a main oscillator. But you can use either oscillator in any position in the overall system.

Brooks - Brooks is a smaller thru-zero 4hp basic VCO that has all the basic waveforms, FM control, sync, and Time Reverse which simply reverses the wave. While it is a fully capable oscillator it works best as a modulation oscillator in the COCO system.

Control Modules

The control modules do two things in the system, they control the routing for the exp FM and sync, and they add either upper (Valley) or lower (Canyon) harmonics. The switches control the routing of exp FM and sync between the oscillators, while only Canyon has any mod bus controls, which is available as a jumper on the back.

Valley - Valley is a wavefolder (aka adds upper harmonics) that offers some mixing at the input, along with controls over order (number of folds) and control over even or odd harmonics (more details). This is meant to be the opposite of the grit in Dirty Laundry and aims to be a nice clean wavefolder.

Canyon - Canyon is a sub-harmonics generator (aka add lower harmonics). You can think of it as a level-controlled clock divider where each knob controls the level of a sub-division (three is 1/3, five is 1/5, etc.). You can then either output just the odds or the evens via dedicated jacks or have a crossfade between the two.

The clock that is being sub-divided can be changed for the odds and evens sides independently so you can get some wonky cross modulation effects.
Read more
out of stock $153.56
After Later Audio Cloaks 4-Channel Voltage Controlled Amplifier Module
Cat: 943138 Rel: 04 May 23
 
A hardware replica of the Mutable Instruments Veils 2020 module in 10HP.
Notes: This is an exact hardware replica of the Mutable Instruments Veils 2020 module. After Later used the "hard-to-find" OPA1679 opamps, but we did switch the package from TSSOP to SOIC, to keep costs down. It is the same part/specs, just a different package.

Based on open source designs by emilie gillet under Creative Commons (CC-BY-SA) license.

Width: 10hp
12V: 50mA
-12V: 50mA
Read more
Tags: VCA module
 1 in stock $166.18
Click for better price!
or call +44 20 7424 1960
quote 943138
After Later Audio Clouds Clouds-Redesigned Module
After Later Audio Clouds Clouds-Redesigned Module (delay/digital/effect/pitch shifter/sampling synth module)
Cat: 805394 Rel: 14 Jan 21
 
Analogue texture synthesiser/rebuild of Mutable Instruments Clouds
Notes: Clouds

This is a new build of a Mutable Instruments Clouds. This module is identical to the now discontinued factory made Clouds. This module loads parasites 2.01 Firmware by default.

The module is fully assembled, tested, and calibrated. Eurorack power cable is included.
Read more
out of stock $173.55
After Later Audio Cumulus Clouds-Redesigned Module
After Later Audio Cumulus Clouds-Redesigned Module (distortion/effect/reverb module)
Cat: 900381 Rel: 20 Sep 22
 
Replica of the Mutable Instruments Clouds.
Notes: This is an exact hardware replica of the Mutable Instruments Clouds.
Read more
out of stock $195.63
After Later Audio Mingles Dual 3-Channel Mixer & Voltage Controlled Panner Module
Cat: 1004349 Rel: 11 Mar 24
 
3-channel mixer & voltage controlled panner module
Notes: Dual three channel voltage controlled panning mixer

Mixer section

Channel 1 and Channel 2 are three channel mixers with potentiometers to control level of three different inputs for each channel. Each channel then has a potentiometer to control panning as well as CV control for panning and level control

Panning and VCA

The VC panners are equal loudness panning and the VCAs for each channel are linear response.

Built-in LFO

There is a built-in LFO that is normalled to the panning CV input of each channel. CH1 gets the standard LFO and CH2 gets an inverse, enabling alternating channel panning. The default is to use a TRI wave for the LFO, but there is a jumper on the back to switch it to SQU.

Width: 12hp
12V: 140mA
-12V: 120mA
Read more
 1 in stock $169.34
Click for better price!
or call +44 20 7424 1960
quote 1004349
After Later Audio nRings Micro Version Of Rings Module
After Later Audio nRings Micro Version Of Rings Module (digital/effect/filter/oscillator/synth voice synth module)
Cat: 805521 Rel: 14 Jan 21
 
Resonator module/rebuild of Mutable Instruments Rings
Notes: nRings

This is a new build of a micro version of Rings from Mutable Instruments. MicroRings, also called NanoRings, retains all the same functionality as a full-size Rings module.

The module is fully assembled, tested, and calibrated. Eurorack power cable is included.

These modules use tall bushing potentiometers to offer a more stable feel.
Read more
 1 in stock $187.22
Click for better price!
or call +44 20 7424 1960
quote 805521
After Later Audio Pique 1U Peaks Replica Module
After Later Audio Pique 1U Peaks Replica Module (digital/drum/envelope generator/LFO/sequencer synth module)
Cat: 805532 Rel: 14 Jan 21
 
Envelope/LFO/tap LFO/Drum generator module/rebuild of Mutable Instruments Peaks
Notes: Pique (uPeaks) 1U Intellijel Format

This is a 1U (Intellijel format) version of the Pique module which is based on the popular Peaks module from Mutable Instruments. It can be an ADSR-style envelope generator, an LFO and a drum emulator.

The module is calibrated, comes with a power cable, and a one year warranty.
Read more
 1 in stock $163.82
Click for better price!
or call +44 20 7424 1960
quote 805532
150/569(ページ1/12)の商品
1  2  3  ...  12  »
Cart subtotal: