Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.  Visit Juno DJ

Synth modules

ホーム  Equipment  

Synth modules

Options
150/242(ページ1/5)の商品
1  2  3  4  5  »
Subscribe to our weekly Studio Equipment emails
2hp Arp Quantized Chord Arpeggiator Module (silver faceplate)
2hp
Cat: 667369 Rel: 31 Oct 17
 
Gate-driven arpeggiator
Notes: Arp is a gate-driven arpeggiator with a multitude of chord types and playback modes. Voltage control over both root note and chord type allow for sequencing any combination of chords in any key imaginable.

With the rate of the arpeggio and reset capability in your own hands, you're free to create dynamic rhythmic melodies from your favourite chords. Take your tonality for a ride with Arp.
Read more
MRP:$137.83 SAVE 18%
 1 in stock $112.57
Click for better price!
or call +44 20 7424 1960
quote 667369
2hp Comb Filter Module (black faceplate)
2hp
Cat: 686012 Rel: 04 May 18
 
Comb filter with self oscillation capability
Notes: Comb is an IIR peaking comb filter with control over cutoff frequency, resonance that can be driven into self oscillation, and a dampening filter in the feedback path. An incredibly short, tuned delay line will alter the character of your input by imposing harmonic peaks on the source. Subtle settings can result in thickening timbres, reminiscent of phaser-like effects, while more extreme settings can create lustrous string sounds from white noise, or tear your waveform to shreds. Explore new sonic territory with Comb.
Read more
MRP:$137.83 SAVE 19%
 2 in stock $111.46
Click for better price!
or call +44 20 7424 1960
quote 686012
2hp Comb Filter Module (silver faceplate)
2hp
Cat: 658149 Rel: 02 Aug 17
 
Comb filter with self oscillation capability
Notes: Comb is an IIR peaking comb filter with control over cutoff frequency, resonance that can be driven into self oscillation, and a dampening filter in the feedback path. An incredibly short, tuned delay line will alter the character of your input by imposing harmonic peaks on the source. Subtle settings can result in thickening timbres, reminiscent of phaser-like effects, while more extreme settings can create lustrous string sounds from white noise, or tear your waveform to shreds. Explore new sonic territory with Comb.
Read more
MRP:$137.83 SAVE 17%
 2 in stock $114.87
Click for better price!
or call +44 20 7424 1960
quote 658149
2hp Comp Module (black faceplate)
2hp
Cat: 766649 Rel: 13 Jul 20
 
Compressor module
Notes: Compressor with side chain functionality.
Read more
MRP:$167.86 SAVE 17%
 2 in stock $139.87
Click for better price!
or call +44 20 7424 1960
quote 766649
2hp Comp Module (silver faceplate)
2hp
Cat: 766648 Rel: 13 Jul 20
 
Compressor module
Notes: Compressor with side chain functionality.
Read more
MRP:$167.86 SAVE 17%
 1 in stock $139.87
Click for better price!
or call +44 20 7424 1960
quote 766648
2hp Div 2 Channel Voltage Controlled Clock Divider & Multiplier Module (black faceplate)
2hp
Cat: 686014 Rel: 04 May 18
 
Clock divider/multiplier module
Notes: Div is a 2 channel, voltage controlled clock divider and multiplier. Incoming clock signals can be multiplied or divided by a factor of 16 with a multitude of values in between.

CV inputs provide external control of the current clock rate, allowing for the creation of dynamic rhythms from a single clock signal.
Read more
MRP:$124.19 SAVE 19%
 2 in stock $100.07
Click for better price!
or call +44 20 7424 1960
quote 686014
2hp Div 2 Channel Voltage Controlled Clock Divider & Multiplier Module (black faceplate) (B-STOCK)
2hp
Cat: 799213 Rel: 04 May 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Div is a 2 channel, voltage controlled clock divider and multiplier. Incoming clock signals can be multiplied or divided by a factor of 16 with a multitude of values in between.

CV inputs provide external control of the current clock rate, allowing for the creation of dynamic rhythms from a single clock signal.
Read more
 1 in stock $100.14
2hp Div 2 Channel Voltage Controlled Clock Divider & Multiplier Module (silver faceplate)
2hp
Cat: 635858 Rel: 30 Dec 16
 
Clock divider/multiplier module
Notes: Div is a 2 channel, voltage controlled clock divider and multiplier. Incoming clock signals can be multiplied or divided by a factor of 16 with a multitude of values in between.

CV inputs provide external control of the current clock rate, allowing for the creation of dynamic rhythms from a single clock signal.
Read more
MRP:$124.19 SAVE 13%
 1 in stock $108.04
Click for better price!
or call +44 20 7424 1960
quote 635858
2hp Grain Granular Processor Module (black faceplate) (B-STOCK)
2hp
Cat: 804549 Rel: 02 Oct 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


2hp Grain is a high-fidelity audio processor focused on granular synthesis. It's capable of generating granular clouds, microsound phrases, and unique textures that are derived from any input signal. The Density control sets the rate of granularization applied to the input signal and sets its position within the buffer. The Mix control sets the balance between live input and the granular audio stream for dialling in the perfect combination of sounds. In addition, there is a frequency control and associated v/oct input allowing for pitch accurate sequencing of grains. Particle patching has never been smaller with Grain.
Read more
 1 in stock $144.92
2hp Hi Hat Drum Module (black faceplate)
2hp
Cat: 686020 Rel: 04 May 18
 
Versatile hi hat with six oscillator architecture
Notes: Hat is a hi-hat cymbal with a wild side. Finding something unique is easy with a blend of sounds ranging from robotic to metallic. At its core are three unique sound sources made up of six oscillators, a noise generator, and a number of filters. Sizzle affects each source independently, adjusting oscillator and filter frequencies, allowing for a broad range of sounds. In addition, separate trigger inputs for open and closed allow for a complete hi-hat pattern on a single module. No matter what situation it's in, Hat provides shimmering, metallic timbres for any percussive purpose.
Read more
MRP:$162.40 SAVE 20%
 2 in stock $129.65
Click for better price!
or call +44 20 7424 1960
quote 686020
2hp Hi Hat Drum Module (silver faceplate)
2hp
Cat: 675793 Rel: 26 Jan 18
 
Versatile hi hat with six oscillator architecture
Notes: Hat is a hi-hat cymbal with a wild side. Finding something unique is easy with a blend of sounds ranging from robotic to metallic. At its core are three unique sound sources made up of six oscillators, a noise generator, and a number of filters. Sizzle affects each source independently, adjusting oscillator and filter frequencies, allowing for a broad range of sounds. In addition, separate trigger inputs for open and closed allow for a complete hi-hat pattern on a single module. No matter what situation it's in, Hat provides shimmering, metallic timbres for any percussive purpose.
Read more
MRP:$162.40 SAVE 20%
 2 in stock $129.65
Click for better price!
or call +44 20 7424 1960
quote 675793
2hp LFO v2 Low Frequency Oscillator Module (black faceplate)
2hp
Cat: 686022 Rel: 04 May 18
 
Compact voltage controlled LFO featuring 8 waveforms
Notes: LFO is a voltage controlled low frequency oscillator. 8 waveforms are available with smooth morphing between each, allowing for complex and unique patterns.

In addition to sine, triangle, sawtooth, and square waveforms on the primary output, four alternate waveforms are accessible simultaneously via the secondary waveform output. The alternate waveforms have been designed with modulation in mind and provide an innovative voltage source to use on filters, oscillators, and everything else.

Animate your modulations with LFO.
Read more
MRP:$124.19 SAVE 14%
 2 in stock $106.90
Click for better price!
or call +44 20 7424 1960
quote 686022
2hp Mix 4 Channel Mixer Module (black faceplate)
2hp
Cat: 686027 Rel: 04 May 18
 
4 channel mixer module
Notes: Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.
Read more
MRP:$124.19 SAVE 17%
 4 in stock $103.49
Click for better price!
or call +44 20 7424 1960
quote 686027
2hp Mix 4 Channel Mixer Module (silver faceplate)
2hp
Cat: 635860 Rel: 30 Dec 16
 
4 channel mixer module
Notes: Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.
Read more
MRP:$124.19 SAVE 19%
 1 in stock $101.21
Click for better price!
or call +44 20 7424 1960
quote 635860
2hp MMF Analogue Multimode Filter Module (silver faceplate)
2hp
Cat: 706868 Rel: 15 Oct 18
 
Voltage controlled multi mode filter
Notes: MMF is an analogue, multimode filter with a 12dB per octave slope. Its sonic character swings all the way from classic low pass to squelchy acid lines. Simultaneous outputs of low pass, high pass, and band pass filter types are provided allowing for many variations of the input signal. Whether you're looking for smooth and creamy, or resonant and wild, MMF can go there.
Read more
MRP:$150.12 SAVE 18%
 1 in stock $122.82
Click for better price!
or call +44 20 7424 1960
quote 706868
FORTHCOMING
2hp Pitch Module (black faceplate)
2hp
Cat: 766655
 
Pitch shifter module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$150.12 SAVE 17%
coming soon $125.10
FORTHCOMING
2hp Pitch Module (silver faceplate)
2hp
Cat: 766651
 
Pitch module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$150.12 SAVE 17%
coming soon $125.10
2hp Pluck Physical Modelling Synthesizer Module (silver faceplate)
2hp
Cat: 684048 Rel: 28 Mar 18
 
Karplus-Strong based physical modelling synth module - 2HP
Notes: Pluck is a physical modelling synth voice. It uses the Karplus-Strong algorithm to create plucked string sounds. The dampening control sets the size of the string and allows for dramatic timbral shifts.

The decay control changes note length from percussive transients to infinite harp sounds. In addition, four voice polyphony provides complex layered tones; all from a single sound source.

Strum a new chord with Pluck.
Read more
MRP:$186.96 SAVE 23%
 1 in stock $144.43
Click for better price!
or call +44 20 7424 1960
quote 684048
2hp Rnd v2 Random Voltage Generator Module (silver faceplate)
2hp
Cat: 680015 Rel: 12 Mar 18
 
Random voltage generator & gate source
Notes: Rnd is a random voltage generator and random gate source with an internal clock.

The quantized and smooth outputs are completely independent, and each feature an attenuator to fine tune the output voltage between 0V and 10V. This allows for a musically useful range to be defined. When externally clocked, random gates erupt from the gate output.

Great for modulation and chaotic rhythmic events, Rnd is a universal solution for adding unpredictability to your system.
Read more
MRP:$124.19 SAVE 17%
 1 in stock $103.49
Click for better price!
or call +44 20 7424 1960
quote 680015
2hp Sine Wave VCO Module (black faceplate)
2hp
Cat: 727389 Rel: 02 Oct 19
 
Digital oscillator module with sub output & wavefolding - black
Notes: Sine is a harmonically pure VCO with two distinct outputs.

The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above the primary output's frequency.

In addition, both outputs have an internal wavefolder that adds harmonic content to the signal allowing for spectrally complex tones within a single module. Keep your tones pure (or not!) with Sine.
Read more
MRP:$186.96 SAVE 22%
 1 in stock $146.71
Click for better price!
or call +44 20 7424 1960
quote 727389
2hp Snare Drum Module (silver faceplate)
2hp
Cat: 675792 Rel: 26 Jan 18
 
Snare drum module featuring classic to esoteric snare sounds & blips
Notes: Snare goes from short blips to 909 hits and everywhere in between. More than just a typical snare sound, this module is a powerful sound design tool that encourages exploration. 1V/Octave tracking allows percussive melodies with atypical timbres, while snap dials in the texture of the metaphorical membrane. Hit the back beat with Snare.
Read more
 1 in stock $129.65
Click for better price!
or call +44 20 7424 1960
quote 675792
2hp Snare Drum Module (silver faceplate) (B-STOCK)
2hp
Cat: 802637 Rel: 26 Jan 18
 
B-STOCK: Item refurbished, repaired and in perfect working order.
Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Snare goes from short blips to 909 hits and everywhere in between. More than just a typical snare sound, this module is a powerful sound design tool that encourages exploration. 1V/Octave tracking allows percussive melodies with atypical timbres, while snap dials in the texture of the metaphorical membrane. Hit the back beat with Snare.
Read more
 1 in stock $117.34
2hp VCA Dual Voltage Controlled Amplifier Module (black faceplate)
2hp
Cat: 686046 Rel: 04 May 18
 
Dual linear VCA module with CV input attenuator & DC-coupled inputs
Notes: The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.
Read more
MRP:$118.73 SAVE 13%
 1 in stock $103.49
Click for better price!
or call +44 20 7424 1960
quote 686046
2hp VCO Voltage Controlled Oscillator Module (silver faceplate)
2hp
Cat: 680018 Rel: 12 Mar 18
 
Analog voltage controlled oscillator with CEM3340 based architecture
Notes: VCO is an analog voltage controlled oscillator based on the reissue of the legendary Curtis CEM3340 IC.

Many believe this chip to be the greatest sounding analog oscillator of all time. VCO features simultaneous triangle, sawtooth, and square wave outputs with linear FM, hard sync, and PWM capabilities. Accurate 1V/Oct tracking across 10+ octaves provides a huge frequency range for melodies or dramatic sweeps.

Add some analog warmth to your patches with VCO.
Read more
MRP:$162.40 SAVE 17%
 1 in stock $134.19
Click for better price!
or call +44 20 7424 1960
quote 680018
4ms Row Power 25 Power Solution For Eurorack Systems (white)
Cat: 752437 Rel: 25 Oct 19
 
25W Eurorack power supply
Notes: The Row Power 25 is a clean, regulated, and protected power supply module for Eurorack systems. It requires a barrel-style power brick (15V - 20V DC) and supplies power to modules via flying bus cables, direct connection, and/or bus boards.

The Row Power 25 provides 25W of power for any Eurorack modules (typically 4-10 modules*):

+12V @ 1.4A maximum, 1.0A recommended
-12V @ 0.8A maximum, 0.5A recommended
+5V @ 1.0A maximum, 0.8A recommended

*number of modules can vary depending on each module's power consumption.

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Multiple Row Power modules can be powered from a single power brick by daisy-chaining with an inexpensive barrel cable. The Row Power 25 can also be daisy-chained to Pods. Each Row Power and Pod will be independently regulated and protected for ultra-low cross-talk between rows.
Read more
MRP:$124.19 SAVE 17%
 6 in stock $103.49
Click for better price!
or call +44 20 7424 1960
quote 752437
4ms Row Power 35 Power Solution For Eurorack Systems (white)
Cat: 739048 Rel: 29 Jul 19
 
Eurorack power supply module - 4HP
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
MRP:$181.51 SAVE 24%
! low stock $138.75
Click for better price!
or call +44 20 7424 1960
quote 739048
Abstract Data ADE60 Four Stage Mixer & Attenuator Module
Cat: 601498 Rel: 01 Nov 17
 
User-configurable, mix & CV utility module
Notes: The ADE-60 is a highly-configurable mixing, signal and control voltage utility with options for 2x gain, attenuversion and CV/biasing allowing users to create configurations that suit their own requirements.

Plugging a cable into any of the output sockets removes any of the previous signal inputs from the mix at the outputs that follow it, allowing the mixer to be used in any combination from a standard 4-input/1-output summing mixer to 4 individual 1-input/1-output attenuators or stand-alone CV sources with additional options for gain and attenuversion per channel.

Used in conjunction with the gain and attenuversion settings the CV/biasing option can provide CV in the following ranges on any and/or all outputs: 0-5V; 0-10V; +/-5V; +/-10V.
Read more
 1 in stock $128.51
FORTHCOMING
Acid Rain Technology Switchblade 3 Channel Switch & Mixer Module
Acid Rain Technology Switchblade 3 Channel Switch & Mixer Module (CV modulation/mixer/switch/utility synth module)
Cat: 804573 Rel: 25 Jan 21
 
3-channel switch & mixer module
Notes: Switchblade is a compact 3 channel switch and mixer. Each channel can be set to switch between or combine two channels of CV or audio with either latching or momentary operation. Each channel can be controlled with a trigger (latching) or gate (momentary) or their respective button during live performance. We designed this module to be a great companion for the trigger, gate, CV and audio sources in your rack.

Details:

4hp

30mm deep

50 mA on +12V, 10 mA on -12V, 0 mA on +5V
Read more
MRP:$141.93 SAVE 22%
coming soon $110.31
ACL Multi II Buffered & Unbuffered Multiple Module
Cat: 673535 Rel: 22 Dec 17
 
Multiple module consisting of an active & passive signal distributor
Notes: The ACL Multi II is a Multiple module providing both non-buffered and buffered outputs. The non-buffered section has one input and six outputs, freely interchangeable and the buffered section consists of one inverting and one non-inverting high-impedance input and five low-impedance outputs. Due to the use of precision low-tolerance resistors and low-noise/low DC-drift/Offset Operational Amplifiers, the module reliably delivers minimal error copies of the incoming signals. The inverting and non-inverting buffered inputs can also function as a mixer, giving at the outputs the difference between the respective signals fed to them.
Read more
 1 in stock $105.31
Click for better price!
or call +44 20 7424 1960
quote 673535
ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate)
Cat: 776125 Rel: 08 Sep 20
 
Expansion module
Notes: The ADDAC111B EXPANSION allows the user to access the first 8 files (a to h) through a trigger.

Files do not play simultaneously, if several triggers happen at the same time top priority goes from top to bottom- meaning that if B E and F triggers are received at once the file that will be played is file B.

The expansion module should be plugged to the back of the Ultra .Wav Player module. There's no connection to the bus boards.

Specificaitons:
Mechanical:
Format: Eurorack
Width: 16 hp
Depth: 3 cm

Control voltage i/o:
CV inputs: i 5v
CV outputs: 0 +10v

Electrical:
Max current: 150ma
Compatible with +-12v and +-15v power supplies
Bus board cable: 8x2 idc (doepfer style) connect
Read more
 1 in stock $141.01
Click for better price!
or call +44 20 7424 1960
quote 776125
ADDAC System ADDAC202 Amplifiers Module (red faceplate)
Cat: 776175 Rel: 08 Sep 20
 
Amplifier module
Notes: A dual channel Amplifier that either boosts your signals up to 10 times the original input or attenuates it to zero.

It also features two leds per channel, to monitor your output polarity.

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $141.01
Click for better price!
or call +44 20 7424 1960
quote 776175
ADDAC System ADDAC208 Comparator & Rectifiers Module (red faceplate)
Cat: 776183 Rel: 08 Sep 20
 
Comparator module
Notes: A Comparator is an electronic circuit that compares two voltages and switches its output to indicate which is larger. The Comparator operates between -10 or +10V

The Output is always -10V if below Threshold and +10V if above Threshold.

A Rectifier is an electronic circuit that is used to transform AC signals to an equivalent DC signal while removing one of it's polarities, i.e. Positive rectification excludes negative signals and vice-versa.
Both sections can be used to change the shape of any waveform as well as its harmonic content.

FRONTPANEL:
1 Comparator Threshold Knob
1 Comparator Jack Output
2 Comparator Monitor Led1 Common Signal Jack Input
4 Rectificated Outputs

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $141.01
Click for better price!
or call +44 20 7424 1960
quote 776183
ADDAC System ADDAC209 VC Time Compensated Glide Module (red faceplate)
Cat: 776185 Rel: 08 Sep 20
 
Glide/slew circuit module
Notes: This is our take on a glide/slew circuit. It introduces a time compensation for the glide/slew rate so that any interval have the same glide time.

Normal glides have a fixed speed, they take X time to go up a semitone and X*12 to go up an octave. A compensation circuit was added to detect and dynamically change the speed according to the distance needed to be made, so that in the end it'll take the same time to reach the final destination no matter if the interval is 1 semitone or 3 octaves. This compensation feature (dry/wet) can controlled by the front panel knob or by CV.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 55 mm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
 1 in stock $105.75
Click for better price!
or call +44 20 7424 1960
quote 776185
ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate)
Cat: 776247 Rel: 08 Sep 20
 
Bridge module
Notes: A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.

Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case. Less clatter, less spaghetti, faster connection! There's nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.The modules can be installed in normal position or a 180 degree position to fit any need and any case design.

Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels. With two 2 ADDAC213Bs connected to each ADDAC213A module, you'll have a total of 24 channels going between your cases with a simple one-cable bridge. Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable.

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$111.91
 2 in stock $111.46
Click for better price!
or call +44 20 7424 1960
quote 776247
ADDAC System ADDAC216 Sum & Difference Module (black faceplate)
Cat: 776260 Rel: 08 Sep 20
 
Sum & difference module
Notes: There are two equal sections in this module labeled A and B.

This module is a peculiar type of mixer that instead of just summing two input signals (X & Y) it also allows the possibility to subtract the two signals.
It works both for audio and CV signals and hence the possibility to get the diference of two CVs or cancel the phase of two audio signals. The resulting signal, of sum or subtraction, is then routed through a switchable (on/off) full rectification circuit labeled: Absolute. After this the gain of the mixed signal goes through another attenuverter labeled: Amplitude to control the resulting signal gain which, being an attenuverter, also allows the possibility to invert the incoming signal. After the Amplitude comes an AC/DC coupling switch followed by an bipolar Offset knob.

Besides the normal output, there's also an inverted output for each of the A & B sections.

The outputs of section A & B are also summed and sent to the Average Output.

Using a single input, just the X or Y input, the module can also be used as a simple dual Attenuverter & Offset CV processor with full rectification and AC coupling options.

Average mix output of both sections.
Read more
MRP:$147.39
 1 in stock $145.57
Click for better price!
or call +44 20 7424 1960
quote 776260
ADDAC System ADDAC304 Manual Gates Module (black faceplate)
Cat: 776300 Rel: 15 Sep 20
 
Manual gates module
Notes: With the ADDAC304 Manual Gates, you'll be getting 8 manual gates (0 +5v) in a nifty package - a perfect way to perform on and control your modular system.

The ADDAC304 comes with an interesting twist: 4 out of the 8 available gates can act as momentary switches, outputting the signals in their respective inputs when each gate's button is pressed.

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
Gate outputs: 0 +5v

ELECTRICAL:
Max current: 10mA
Read more
 1 in stock $110.77
Click for better price!
or call +44 20 7424 1960
quote 776300
ADDAC System ADDAC402B Heuristic I/O Expansion Module (red faceplate)
Cat: 776312 Rel: 08 Sep 20
 
MIDI expansion module
Notes: ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi interface, with:

Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like play, stop and continue.

CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign on MIDI Channel 2.

MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls as any standard MIDI controller. The individual CC numbers can be configured through the Configuration Menu.

MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.

MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI CC controls. This allow full automation of the module via MIDI
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
Read more
MRP:$117.36
 1 in stock $113.72
Click for better price!
or call +44 20 7424 1960
quote 776312
ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate)
Cat: 776329 Rel: 08 Sep 20
 
Expansion module
Notes: The ADDAC501B expansion is connected directly to the ADDAC501 Complex Random. It extends functionality by adding gate outputs to the random generators.

If ADDAC501 generates a new random above the average between Minimum and Maximum, then the respective gate on ADDAC501B is triggered.

There are three pairs of gates, corresponding to the respective outputs on ADDAC501. Each gate pair has both positive and inverted outputs.

This expansion module also offers a dedicated knob for gliding effects. With it you can have a voltage ramp between two consecutive random numbers- randomized "legato" expressiveness.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 5 cm

Control Voltage I/O:
- Gate outputs: 0 - 5v

Electrical:
- Connects directly to ADDAC501
- Max current: 20mA
Read more
 1 in stock $141.01
Click for better price!
or call +44 20 7424 1960
quote 776329
ADDAC System ADDAC605 VC Spectral Tilt Module (black faceplate) (B-STOCK)
Cat: 810448 Rel: 08 Oct 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Two-channel spectral tilt filter with simple single-knob control and CV input. Adjust the frequency balance by turning the knob to emphasise highs or lows. Simple but effective way to add movement or stereo width.

Supplier's Notes:
The TILT EQ concept was first introduced in the 1970's by Quad Ltd, featured on the company's model 34 preamplifier.

The tilt control tilts the frequency spectrum of the audio signal by simultaneously boosting the treble and cutting the bass frequencies, or vice versa, making it a simple to use but powerful EQ.

As stated by Quad Ltd, it was designed to produce a very gradual change in balance across the musical spectrum without changing the overall subjective level.

This gradual fall from Bass to Treble, or vice versa, means there's no sudden change and hence no 'coloration' added to the sound, the sound will remain entirelly natural but with a slight added bottom or high end. In practice, it rotates most of the audio-range frequency response around a 1Khz axis, so as to change the overall balance of the sound from warm to cool without affecting either the apparent volume or the "color" of the sound.

Here this idea is introducedinto the modular world in a stereo configuration.

CV input with attenuverter was added for the Tilt control as well as a Spectral Motion switch that allows stereo spectral matching or inverted spectrum use of the Tilt control: Left=Right matches both channels direction, i.e. when left channel is tilted to the low end the right channel will also be tilted to the low end

Left Right inverts the Right channel spectrum, i.e. when left channel is tilted to the low end the right channel will be inverselly tilted to the high end, or vice-versa.

This possibility is extremmelly interesting when applied as a stereo effect, in other words a spectral EQ panner. This module will also be available as a full DIY kit.

Specs:
4Hp
4.5cm deep
40mA on each rail
Read more
 1 in stock $142.09
ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate)
Cat: 776437 Rel: 08 Sep 20
 
Pre-amp module
Notes: The Phono Pre Amplifier module- connect your turntable to it and bring it's sound straight into any of your patches.

Specs:
- Width: 4 HP
- Depth: 4.5 cm
- Current: 40mA
Read more
 1 in stock $141.01
Click for better price!
or call +44 20 7424 1960
quote 776437
After Later Audio Blend CV/Audio Mixer and VCA Module
Cat: 805043 Rel: 14 Jan 21
 
CV/audio mixer & VCA module
Notes: CV/Audio Mixer and Dual VCA

CV sections

Blend has two CV sections each with:

Input (normalled to a +5V signal):
Attenuverter
Output

CV Mixer section

Blend takes the outputs of the two CV sections and offers the following:

Min output
Max output
Comparator output (level brought down to 4.5V)
Sum output

The min and max sections do not attempt to be precision min/max measurements. They will be within two diode drops of the actual min or max voltage.

VCA Sections:

There are two VCA sections that are also have a mix output. The CV input for each VCA is normalled to the output of a CV section. The VCA circuits are LM13700 based so they will slightly color the sound. The response curve is nearly linear but offers a slight exponential curve.

Power:

40 mA +12V
40 mA -12V

25 mm deep
Read more
MRP:$144.66 SAVE 17%
 1 in stock $119.40
Click for better price!
or call +44 20 7424 1960
quote 805043
After Later Audio BOSC CEM3340 Based Oscillator Module
Cat: 805048 Rel: 14 Jan 21
 
Triangle core oscillator module
Notes: CEM3340 Based Oscillator

A triangle core oscillator that is based on the same CEM3340 chipset used in legendary synths (SH-101, Prophet 5, MemoryMoog). Offers a wide frequency range from 80s cycles up to 40kHz.

Four waveform outputs (TRI, SAW, PULSE, SINE)

V/OCT tracking over 5+ octaves

Linear FM with attenuator

Choice of hard sync or soft sync (set via jumper on back)

PWM attenuator and input (normalled to 5V)

LFO/VCO switch will change from audio rate to LFO rate (choice of two LFO timings, 8 sec or 80 sec, via jumper on the back)

Size: 6hp
Read more
MRP:$144.66 SAVE 17%
 1 in stock $119.40
Click for better price!
or call +44 20 7424 1960
quote 805048
After Later Audio DVCA Dual VCA 4HP Veils Redesign Module (1U format)
Cat: 805416 Rel: 14 Jan 21
 
Dual VCA module/rebuild of Mutable Instruments Veils
Notes: Dual VCA (dVCA) - 1U Intellijel Format

DVCA is a dual VCA based on the Mutable Instruments Veils. It features two separate voltage controlled amplifiers, both with a gain and a response curve potentiometer, that is variable from linear to exponential. The outputs are normaled, so when no patch cable is present on output 1, output 2 will contain both signals, allowing the module to be used as a mixer. Several DVCAs can be daisy-chained for voltage controlled mixer operation.

Comes with jack lights that can be disabled via a jumper on the back.

The panel is an After Later Audio black panel with gold accents.

The module is fully assembled and tested. Eurorack power cable included.
Read more
MRP:$144.66
 1 in stock $134.19
Click for better price!
or call +44 20 7424 1960
quote 805416
After Later Audio DVCA Dual VCA 4HP Veils Redesign Module (eurorack format)
Cat: 805403 Rel: 14 Jan 21
 
Dual VCA module/rebuild of Mutable Instruments Veils
Notes: DVCA

DVCA is a dual VCA based on the Mutable Instruments Veils. It features two separate voltage-controlled amplifiers, both with a gain and a response curve potentiometer, that is variable from linear to exponential. The outputs are normalized, so when no patch cable is present on output 1, output 2 will contain both signals, allowing the module to be used as a mixer. Several DVCAs can be daisy-chained for voltage-controlled mixer operation. It comes with jack lights that can be disabled via a jumper on the back.

These modules use tall bushing potentiometers to offer a more stable feel.

The module is fully assembled and tested. Eurorack power cable included.
Read more
MRP:$144.66 SAVE 17%
 1 in stock $119.40
Click for better price!
or call +44 20 7424 1960
quote 805403
After Later Audio Steps Random Looping Stepped CV and Burst Generator Module
Cat: 805036 Rel: 14 Jan 21
 
CV/burst generator module
Notes: STEPS has three functional blocks:

Internal clock:
Rate control and output

Burst generator:
Pulses output which generates 8 pulses on every trigger
Gate output which is high during the burst event
EOB output which fires at the end of a burst event

Random Looping Stepped CV Generator:
R.gate output outputs a random gate during a burst event
Random stepped output or a loop of 8 steps.
Steps output with attenuverter. The Steps output is held low while there is no burst event.

You can either use this as a random stepped CV source or as a repeating 8 stepped CV source. You then can trigger the burst generator to play the 8 step loop or 8 random steps. All of this can use the internal or external clock signals. To get more complex patterns you can daisy chain STEPS modules together by tying together their clocks and sending EOB to TRIG. This way you can generate 16 step patterns (or longer).

When first turning on STEPS, you will need to run the module in RAND mode for at least 8 steps to fill the shift register with data.

A caveat about STEPS:
If a trigger is received off beat from the internal clock, the first step duration will be shortened.

Power:

75 mA +12V
65 mA -12V

Size: 25 mm deep
Read more
MRP:$156.94 SAVE 17%
 1 in stock $129.63
Click for better price!
or call +44 20 7424 1960
quote 805036
After Later Audio Tilt Function Generator and ADSR Envelope Generator Module
Cat: 805039 Rel: 14 Jan 21
 
Function generator/ADSR envelope generator module
Notes: This is the After Later Audio take on the classic Slope Generator module first introduced by Serge back in the 1970s. The module is really a jack of all trades as it can be a slew limiter, envelope generator, oscillator (both LFO and audio rate), and function generator.

This stays true to the original design by offering both a unipolar and bipolar output while adding separate controls for exp/log for both rise and fall and a gate/sustain function to get full ADSR envelopes.

The rise output is high during the rising portion of the cycle and fall output is high during the falling portion of the cycle.

Use the IN input to get standard slew limiter functionality.

Use the GATE input to trigger an ADSR envelope and then use the sustain control to control the level of the sustain. Rise will control the attack and fall controls both the decay and release times. You can also use the GATE input while using a cycle mode and this will adjust the 0V level to the sustain level. This gets some great effects with audio rate frequencies on the on the rise/fall controls.

There are two rate modes controllable by a jumper on the back. The module is set to AUDIO mode at the factory.
LFO mode - 10min/cycle to 115hz
AUDIO mode - 75s/cycle to 1.2kHz

Power:

55 mA +12V
30 mA -12V
Read more
MRP:$167.86 SAVE 17%
 1 in stock $139.87
Click for better price!
or call +44 20 7424 1960
quote 805039
AJH Synth V Scale Variable Buffer & Multi Module (black)
Cat: 637041 Rel: 22 Mar 17
 
Precision buffered multiple module with individual output trimmers - dark edition
Notes: This is a precision active buffer and multiple. This module has outstanding performance: it features very high input impedance, very low output impedance and an offset voltage of <1mV.

Not all active multi's are born equal, some designs do not fully solve impedance mismatch and tracking problems, or they apply offset voltages to the output and in rare cases can cause more problems than they solve!

AJH Synth have added a very useful (and unique) feature to cure tracking problems: four of the five outputs can be adjusted up or down by +/-5% from the front panel, so that VCO's and VCF's that don't track 1V/Oct exactly can be easily compensated to track correctly without having to re-calibrate the VCO or VCF themselves.
Read more
MRP:$143.29 SAVE 17%
 2 in stock $118.28
Click for better price!
or call +44 20 7424 1960
quote 637041
ALM Beast's Chalkboard Octave Switcher Module
Cat: 584248 Rel: 15 Apr 16
 
Dual channel stepped voltage source and adder synth module - 6HP wide
Notes: 'Beast's Chalkboard' is dual channel stepped voltage source and adder for your eurorack modular synthesizer system. It primarily is intended as a dual octave switcher for VCO's but has many other uses including sequence transposition, FM ratio creation, buffered CV distribution and VCO calibration.

Technical Specifications:

Supply: +/-12V (Reverse voltage & polyfuse protection)
Current Draw: ~30ma
Size: 6 HP
Depth: 22mm (including power header)
Offset Error: +/- 10mV
Read more
 1 in stock $119.38
Click for better price!
or call +44 20 7424 1960
quote 584248
ALM mmMidi MIDI CV & Clock Interface Module
Cat: 757946 Rel: 09 Dec 19
 
Compact & straightforward MIDI interface - 4HP
Notes: The mmMidi is a simple & compact MIDI to CV interface for your Eurorack synthesiser. It translates both MIDI clock and 2 Channels of MIDI note, velocity and gate information to corresponding voltage control signals. The mmMidi is quick to set up and requires minimal configuration.
Read more
 5 in stock $110.31
Click for better price!
or call +44 20 7424 1960
quote 757946
ALM Pip Slope Mk2 Compact Envelope Generator Module
ALM Pip Slope Mk2 Compact Envelope Generator Module (envelope generator / function generator / LFO synth module)
Cat: 792489 Rel: 21 Sep 20
 
envelope generator module
Notes: The ‘Pip Slope’ (rev II) is a compact envelope and function generator. It supports both Attack/Decay and Attack/Sustain/Decay type envelopes with both direct and voltage control of Attack and Decay times. Envelope shapes can be morphed between exponential, linear and logarithmic type slopes. Envelopes can be made to loop, repeating infinitely or decreasing with time or amplitude for echo and bouncing ball type effects. An ‘End of Cycle’ trigger output further extends the envelopes functionality for both clocking and burst or fill type effects.

The improved Pip Slope adds a number of new features and updates over the original Pip whilst keeping the same size. Improvements include increased output resolution, finer control of fast envelopes, a new morphing shape control, switchable 5v or 8v maximum envelope level, additional loop modes and an additional trigger output.

Features:
Compact envelope and function generator in 4HP.
Trigger and gate inputs.
Voltage and direct control of attack and release times.
Snappy or super long envelope times – ranging approx 1ms to 7 minutes per stage.
Optional self looping ability with 3 different loop modes: Decreasing amplitude, decreasing time, and regular loop.
Shape control that morphs the envelope shape from logarithmic to linear to exponential curves.
End of Slope trigger output that fires a trigger at the end the envelope or loop cycle.
Selectable 5v or 8v max envelope level output.
Reverse polarity protection.
Skiff friendly.
Designed and Made in the UK.

Technical Specifications
Supply: +12V 30mA / -12V 10mA
Size: 4HP
Depth: 38mm
Read more
 6 in stock $114.87
Click for better price!
or call +44 20 7424 1960
quote 792489
150/242(ページ1/5)の商品
1  2  3  4  5  »

Filter

Synth modules
DJ機器
Release Date
Close