安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

ホーム  Equipment  

Synth modules

Options
150/273(ページ1/6)の商品
1  2  3  4  5  6  »
Subscribe to our weekly Studio Equipment emails
1010 Music Bitbox Mk2 Intuitive Sampling Module
Cat: 775085 Rel: 22 Jun 20
 
sampling module
Notes: Updated version of the excellent Bitbox sampler module offers more powerful sound processing and an improved touch screen. Improved effects and mixing with all the same creative power of the original.

Supplier notes:
Bitbox mk2 delivers powerful sampling and mangling for Eurorack. With this module you can add recording, sample playback, clip launching, slicing, granular sounds and musically intelligent looping capabilities to your Eurorack rig. With a 3.5 inch touchscreen, bitbox mk2 makes easy work of selecting, editing, and tweaking your samples. You can stream large samples of up to 4 GB file size straight from the microSD card. Interact with other musical components via CV and MIDI. Tweak your configurations to get them just right, then save them to multiple presets for future reuse. With the new bitbox mk2 hardware, you can now do more with the new more powerful processor.

Sample Playback
Play up to 24 polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger samples streaming directly from the microSD card
Configure 16 sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Use MIDI for polyphonic playback of samples or slices
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer
Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode
Inputs and Outputs
Connect up to 8 CV modulators to control numerous sample parameters
Trigger each of the 16 pads with a dedicated gate input
Record through the dedicated stereo audio input pair
Use CV to keep time through the dedicated clock input
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Route the audio from each pad out to one of 2 stereo audio output pairs or any of the corresponding single channels
Inputs and outputs are DC coupled so you can record and play out CV signals

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Trigger each pad independently through a dedicated gate input
Use MIDI to trigger pads via a note per pad
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode- no need to look up CC numbers
Module Features
Use the 3.5? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Fill out your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Select Flipped UI mode to mount the unit with the screen on the bottom and use the screen, knobs, buttons, and CV jacks as you normally would
Read more
MRP:$807.42 SAVE 22%
 7 in stock $628.28
Click for better price!
or call +44 20 7424 1960
quote 775085
1010 Music/MOK Waverazor Dual Oscillator Module
Cat: 740064 Rel: 09 Aug 19
 
Dual oscillator Eurorack module with patented wave-slicing design - 26HP
Notes: Proper freaky digital Eurorack business. Based on the synth plugin of the same name, Waverazor is a bonkers aggro waveshaping oscillator. Ideal for filthy bass sounds and nasty leads.

Supplier notes:
The Waverazor Dual Oscillator is a result of a special collaboration between 1010music and MOK. It is the first hardware module to bring MOK's patented wave-slicing? oscillator design to Eurorack format. Waverazor's novel approach to synthesis splices waveforms into twisted and aggressive new timbres. Featuring fresh sound generation techniques like Multi-Sync and Mutant AM, the Waverazor oscillator is perfect for biting leads, glitched-out basses, cinematic drones and everything in between.

One Waverazor Eurorack oscillator can contain up to 8 wave slices, creating a multi-segment "Frankenstein" waveform that produces extended harmonic content beyond any single wave shape. Each individual slice has independent control over wave pitch, volume, phase and DC offset, allowing a single oscillator to contain a multitude of timbral colours. Even the "Razor" itself can be adjusted, with parameters for its own slice frequency, step size multiplier and duty cycle.

The Waverazor Dual Oscillator module provides a central waveform display that allows you to visualize the output. There's an audio input for slicing up any sound you like. Four endless knobs make it possible to morph multiple parameters at once, while the touch screen enables X/Y performance controllers that allow you to manipulate the sound with the swipe of your finger. Top it all off with 20 modulation CV inputs for complete sonic insanity!

What is included:

- Waverazor Dual Oscillator Eurorack module
- MicroSD card with Waverazor firmware and patch data loaded on it
- Eurorack power cable
- Waverazor Dual Oscillator Quick Start guide
- MIDI Adapter
Read more
 1 in stock $563.07
2hp Comp Module (black faceplate)
2hp
Cat: 766649 Rel: 13 Jul 20
 
Compressor module
Notes: Compressor with side chain functionality.
Read more
MRP:$160.44 SAVE 17%
 3 in stock $133.69
Click for better price!
or call +44 20 7424 1960
quote 766649
2hp Grain Granular Processor Module (black faceplate)
2hp
Cat: 727386 Rel: 02 Oct 19
 
High fidelity audio processor focused on granular synthesis
Notes: 2hp Grain is a high-fidelity audio processor focused on granular synthesis. It's capable of generating granular clouds, microsound phrases, and unique textures that are derived from any input signal. The Density control sets the rate of granularization applied to the input signal and sets its position within the buffer. The Mix control sets the balance between live input and the granular audio stream for dialling in the perfect combination of sounds. In addition, there is a frequency control and associated v/oct input allowing for pitch accurate sequencing of grains. Particle patching has never been smaller with Grain.
Read more
MRP:$178.70 SAVE 15%
 1 in stock $152.18
Click for better price!
or call +44 20 7424 1960
quote 727386
2hp Sine Wave VCO Module (black faceplate)
2hp
Cat: 727389 Rel: 02 Oct 19
 
Digital oscillator module with sub output & wavefolding - black
Notes: Sine is a harmonically pure VCO with two distinct outputs.

The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above the primary output's frequency.

In addition, both outputs have an internal wavefolder that adds harmonic content to the signal allowing for spectrally complex tones within a single module. Keep your tones pure (or not!) with Sine.
Read more
MRP:$178.70 SAVE 21%
 3 in stock $141.31
4ms Ensemble Oscillator Module
Cat: 762166 Rel: 18 May 20
 
polyphonic oscillator module
Notes: Seriously potent polyphonic voice built around 16 sine-based oscillators. Capable of a huge range of tones thanks to FM, phase distortion and wavefolding. Another cracker from a consistently reliable brand.

Supplier's notes:
The Ensemble Oscillator is a unified polyphonic voice of sixteen complex oscillators combining additive, FM, phase-distortion and wavefolding synthesis techniques in new unorthodox ways. By quantizing the oscillators to scales or series of harmonics, the Ensemble Oscillator allows you to explore the sonic boundary between musical chords and rich evolving textures. Easily create a wide variety of sounds ranging from aggregates of pure sine waves to pulsar synthesis or pristine harmonic tones and lush wide chords to rich dirty drones and rumbling glitches. Custom scales can quickly be "learned" and saved using a CV keyboard or by manually entering notes with the controls.

The Ensemble Oscillator is designed by Matthias Puech and 4ms Company.

30 factory-programmed, user-writeable scales organized in three groups:
12TET: all notes quantized to equal temperament, repeating over octaves
Octave: unquantized notes, repeating over octaves
Free: unquantized notes, repeating over the interval between the lowest and highest note

16HP Eurorack format module
0.98" (25mm) maximum depth (including power cable)
10-pin to 16-pin Eurorack power header
Power consumption
+12V: 114mA maximum
-12V: 45mA maximum
+5V: 0mA (not used)
Audio outputs
Frequency range: 0Hz (DC) - 20kHz
Typical amplitude: 10Vpp
Maximum amplitude: 18.5Vpp
1V/oct inputs (Root and Pitch)
Voltage range: -2V to +6V (8 octave range)
Factory calibrated to 1.00V/oct
Per-jack user-calibration allows from 0.7V/oct to 1.3V/oct
CV inputs (other than 1V/oct)
Voltage range: -5V to +5V
Gate inputs
Trigger threshold: 2.5V
User memory (non-volatile)
Scale slots: 30
Shift feature settings
1V/oct calibration settings
Read more
MRP:$403.06 SAVE 22%
 More than 10 in stock $313.06
Click for better price!
or call +44 20 7424 1960
quote 762166
4ms Listen Up Passive Expander Module For Listen Modules
Cat: 752435 Rel: 25 Oct 19
 
Small passive expander for the Listen Four & Listen IO modules - 4HP
Notes: The Listen Up is a small passive expander for the Listen modules that provides stereo 1/4" (6.35mm) jack inputs and outputs. It connects to one or two Listen modules and/or WAV Recorder module with the included 3-pin cables. There are four 1/4" jacks arranged in left/right pairs. The left jack of each pair can be used as a TRS stereo jack if the right jack is unpatched.
Read more
MRP:$76.96 SAVE 11%
 1 in stock $68.47
Click for better price!
or call +44 20 7424 1960
quote 752435
4ms Pod 32 Beta Unpowered Eurorack Module Enclosure Case
Cat: 752443 Rel: 25 Oct 19
 
32HP metal enclosure for Eurorack modules - Beta version
Notes: Limited Beta version of the popular Pod32. These are new, fully tested and functional units. The only difference between the Pod32 Beta and the regular Pod32 is that the Beta version has fewer holes to screw in modules. Most common Eurorack sizes will fit from 4HP to 32HP, but some odd sizes and combinations won't fit. Please refer to the product image, or visit the 4ms website for possible module combinations.

Pods are a perfect way to get started in Eurorack module, or add a couple more modules to your monster system!

Made from 100% anodized aluminium, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Read more
MRP:$30.00 SAVE 17%
 3 in stock $25.01
4ms Row Power 25 Power Solution For Eurorack Systems (white)
Cat: 752437 Rel: 25 Oct 19
 
25W Eurorack power supply
Notes: The Row Power 25 is a clean, regulated, and protected power supply module for Eurorack systems. It requires a barrel-style power brick (15V - 20V DC) and supplies power to modules via flying bus cables, direct connection, and/or bus boards.

The Row Power 25 provides 25W of power for any Eurorack modules (typically 4-10 modules*):

+12V @ 1.4A maximum, 1.0A recommended
-12V @ 0.8A maximum, 0.5A recommended
+5V @ 1.0A maximum, 0.8A recommended

*number of modules can vary depending on each module's power consumption.

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Multiple Row Power modules can be powered from a single power brick by daisy-chaining with an inexpensive barrel cable. The Row Power 25 can also be daisy-chained to Pods. Each Row Power and Pod will be independently regulated and protected for ultra-low cross-talk between rows.
Read more
MRP:$118.70 SAVE 17%
 4 in stock $98.91
Click for better price!
or call +44 20 7424 1960
quote 752437
ACL Mini MIDI USB MIDI To CV Converter Module
Cat: 776679 Rel: 06 Aug 20
 
MIDI to CV converter module
Notes: The ACL MINI MIDI is a USB MIDI to CV convertor module in a small module.

It uses MIDI CLOCK, START/STOP, one selectable MIDI Controller and a monophonic MIDI Note to be converted to Eurorack compatible CV, GATE and clock signals.

It can be used as USB MIDI to CV interface by connecting to your computer via the USB B port. A Class Compliant USB MIDI device can be connected to the USB A port.
Read more
MRP:$350.88 SAVE 21%
 2 in stock $276.09
ACL Pan Mix Mixer Module
ACL Pan Mix Mixer Module (synth module)
Cat: 776671 Rel: 30 Jun 20
 
mixer module
Notes: The ACL Pan Mix module mixes up to four different mono sources into a stereo output with panorama and gain control. It also includes an stereo aux input, which will be added unity gain to the sum for cascading purposes.
Read more
MRP:$263.49 SAVE 17%
 3 in stock $217.39
ACL Sum Sum Mixer Module
ACL Sum Sum Mixer Module (synth module)
Cat: 776668 Rel: 30 Jun 20
 
mixer module
Notes: The ACL SUM SUM consists of two rows of six inputs that are summed into one output each.

It can be used as a stereo signal summer or two mono signal summers, either audio or CV.

The internal gain of each row can be switched between Unity gain, a gain of 0.5 (-6dB) or 0.33 (-9.5dB) using convenient dip switches on the back of the module.
Read more
MRP:$176.09 SAVE 17%
 2 in stock $146.73
AION Modular 902 Voltage Controlled Amplifier Module
Cat: 780138 Rel: 08 Jul 20
 
Voltage controlled amplifier module
Notes: The AION MODULAR 902 VCA is an Eurorack clone of the classic Moog Modular 902.

The 902 is a Voltage Controlled Amplifier with balanced directly coupled inputs and outputs.

The 902 VCA can be used in any circumstances a voltage controlled variation of gain is desired.
Both audio or CV sources can be modulated by this module.

Both linear and exponential gain response are avaliable.

Specifications:
Power: +12 (50mA), -12 (30mA)
Depth: 20mm
Doepfer compatible

50 mA +12V
30 mA -12V
0 mA 5V
Read more
MRP:$246.53 SAVE 19%
 1 in stock $198.91
Click for better price!
or call +44 20 7424 1960
quote 780138
AION Modular 904A Voltage Controlled Low Pass Filter Module
Cat: 780153 Rel: 08 Jul 20
 
Voltage controlled low pass filter module
Notes: The AION Modular 904A Low Pass filter is an Eurorack clone of the classic Moog Modular Low Pass filter (should not be confused with the Mini Moog Low Pass filter).

The 904A Low Pass filter attenuates frequencies above the Fixed Control Voltage (cutoff frequency) point at a rate of 24dB per octave. The cutoff frequency is voltage controlled through the three control inputs at the bottom of the module (1v per octave).

The Regeneration knob (resonance) varies the amount of internal feedback, creating a resonant peak at the cutoff frequency.
The Fixed Controlled Voltage knob adjustes frequency over 12 octaves span (1v per octave).

The Frequency Range switch:
(sets the frequency band in two-octave steps)
1- 1Hz to 5kHz
2- 4Hz to 20kHz
3- 16Hz to 80kHz

Specifications:
Power: +12 40mA, -12 25mA
Depth: 40mm
Doepfer compatible

40 mA +12V
25 mA -12V
0 mA 5V
Read more
MRP:$330.01 SAVE 20%
 1 in stock $265.22
Click for better price!
or call +44 20 7424 1960
quote 780153
AION Modular 904C Filter Coupler Module
Cat: 780136 Rel: 07 Jul 20
 
Filter coupler module
Notes: The AION Modular 904C Filter Coupler is an Eurorack clone of the classic Moog Modular 904C.

The 904C Filter Coupler connects the 904A Lowpass and the 904B Highpass together to produce a Bandpass or a Band Reject filter response.

Bandwidth can be extended to three octaves and Center Frequency ranges from 5Hz to 20KHz. Both can be controlled manually or via control voltage.

The 904C provides a wide variety of signal processing and we strongly encourage experimentation but we advise to start with the following settings:

904A Fixed Control Voltage +6
904A Frequency Range 2
904B Fixed Control Voltage -1
904B Frequency Range LOW

The 904A and the 904B are required to use the 904C.
In the "OFF" position, the 904A and 904B are disconnected from the 904C an can be used independently.

The connection cables are provided with the module.

30 mA +12V
15 mA -12V
0 mA 5V


Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible.
Read more
MRP:$328.71 SAVE 19%
 1 in stock $265.22
Click for better price!
or call +44 20 7424 1960
quote 780136
AION Modular 907A Fixed Filter Bank Module
Cat: 780134 Rel: 08 Jul 20
 
Filter bank module
Notes: The 907A Fixed Filter Bank is a non-voltage controlled modifier which emphasizes or reduces the gain of the center frequency bands indicated on each of the eight center pots, in addition to the cut-off points from low pass and high pass filters at either frequency extreme. A total of 10 overlapping filter networks are included.

Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible.
Read more
MRP:$480.02 SAVE 19%
 1 in stock $386.96
Click for better price!
or call +44 20 7424 1960
quote 780134
AION Modular 911 Envelope Generator Module
Cat: 780140 Rel: 07 Jul 20
 
Envelope generator module
Notes: The AION MODULAR 911 Envelope Generator is an Eurorack clone of the classic Moog™ Modular 911.

The 911 Envelope Generator (ADSR) generates the Control Voltage contours required for producing envelopes in conjunction with a voltage-controlled amplifier or a voltage-controlled Filter.

Attack time (T1), Decay time (T2), and Release time (T3) are all independently variable over a 2 millisecond - 10 second range, making the module suitable for very fast percussive sounds or long and evolving sounds.

The 911 Envelope Generator can be triggered by an external gate signal via the Trigger Input or manually by a push button.

Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible
Read more
MRP:$246.53 SAVE 19%
 1 in stock $198.91
Click for better price!
or call +44 20 7424 1960
quote 780140
AION Modular 912 Envelope Follower Module
Cat: 780115 Rel: 08 Jul 20
 
Envelope follower module
Notes: The Envelope Follower produces two functions which can be used separately or in conjunction. The follower circuit Signal Input presents a control voltage output (DC) proportional to the average amplitude of the AC input signal. The second function, a Schmitt trigger, generates a V-trigger above a threshold voltage (comparator), when a slowly varying or DC voltage is introduced at the control input jack. The normalling of the control input of the follower circuit to the control input of the Schmitt trigger circuit allows both control voltage and trigger to be generated from a single variable source.

Specifications:
Power: +12 (40mA), -12 (8mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$267.40 SAVE 20%
 1 in stock $215.21
Click for better price!
or call +44 20 7424 1960
quote 780115
AION Modular 921 Voltage Controlled Oscillator Module
Cat: 780149 Rel: 07 Jul 20
 
Voltage controlled oscillator module
Notes: The AION 921 VCO is a variable waveform generator which produces frequencies ranging from sub-audio (LFO) to 40.000 hz. Four waveforms are available: sine, triangular, sawtooth and rectangular (with variable duty cycle A.K.A. pulse width modulation).
Both fixed and variable levels can be obtained from the front panel output jacks. Nominal frequency and range controls (octave) are found at the top of the module.

Voltage controlled rectangular width (VC-PWM) is set by the knob in the upper center (left) with the accompanying voltage input jacks.
Multiple frequency control inputs 1 and 2 can be plugged into this module in parallel. Control input 3 is used via the pot for linear frequency response (Liniar FM). All waveform outputs can be used if desired.

This is what we consider an improved version of the Moog 921 VCO, not a direct clone. Improvements were made concerning tuning and stability issues.

Frequency range:
0.01 hz - 40.000 hz

Range switch:
sub audio - 0.01 - 400 hz
audio - 1 - 40.000 hz

Scale switch:
2 or 12 octave frequency span.

Auxiliary outputs:
2 jacks (one normal, one inverted) with selected waveforms (sine, triangle, sawtooth, inverted sawtooth rectangular and inverted rectangular).
Waveforms amplitude controllable from 0 to maximum.

Hard and Soft synchronisation selectable via a switch.
Synch must be "OFF" (center position) when synchronisation is not beeing used, otherwise it will sound out of tuning.

Specifications:
Depth: 40mm
Doepfer compatible.

30 mA +12V
30 mA -12V
0 mA 5V
Read more
MRP:$480.02 SAVE 19%
 1 in stock $386.96
Click for better price!
or call +44 20 7424 1960
quote 780149
AION Modular 921ABB Voltage Controlled Oscillator Bank Module
Cat: 780127 Rel: 07 Jul 20
 
Voltage controlled oscillator module
Notes: The AION 921ABB is a VCO-bank with two variable waveform generators which produces frequencies ranging from sub-audio (LFO) to 40.000 hz. Four waveforms are available: sine, triangular, sawtooth and rectangular (with variable duty cycle A.K.A. pulse width modulation).
Both oscillators are controlled by the driver on the left side of the module. 3 control inputs for frequency and 2 control inputs for PWM, as well as manual operation for frequency and pulse width. Each of the two oscillators has a frequency adjust pot, an octave switch, the 4 waveform outputs and one exponential and one linear input for frequency control. A switchable synchronization input for each oscillator completes the operability.

Frequency range:
0.01 hz - 40.000 hz

Range switch:
sub audio - 0.01 - 400 hz
audio - 1 - 40.000 hz

Scale switch:
2 or 12 octave frequency span.

Specifications:
Power: +12V (45mA) -12V (45mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$753.94 SAVE 19%
 1 in stock $607.63
Click for better price!
or call +44 20 7424 1960
quote 780127
AION Modular 923 Noise & Filters Module
Cat: 780146 Rel: 07 Jul 20
 
Noise & filters module
Notes: The AION MODULAR 923 Noise/Filters is an Eurorack clone of the classic Moog Modular 923.

The 923 Noise/Filters module provides a white noise and a pink noise source along with a manual Lowpass and a 6dB Highpass filter.

The two manual sweep filters, are single pole circuits with a frequency cutoff slope of 6dB per octave and a frequency range of 10Hz to 10KHz.

Any kind of noise color can be achieved using the white noise and filters together.

Specifications:
Power: +12 (35mA), -12 (35mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$260.88 SAVE 20%
 1 in stock $209.79
Click for better price!
or call +44 20 7424 1960
quote 780146
AION Modular 991 Filter & Attenuator Module
Cat: 780121 Rel: 07 Jul 20
 
Filter & attentuator module
Notes: The 991 contains 2 passive filters, one 6dB High Pass Filter and one 6dB Low Pass Fillter switchable in 6 positions. On the lower part of the module one finds an Attenuator. No power is required.

Specifications:
Depth: 30 mm
Doepfer compatible
Read more
MRP:$198.27 SAVE 19%
 1 in stock $159.78
Click for better price!
or call +44 20 7424 1960
quote 780121
AION Modular 995 Attenuators Module
Cat: 780130 Rel: 07 Jul 20
 
Attenuator module
Notes: The 995 Attenuator panel consists of three "passive circuits", each made of a 25k potentiometer between input and output. The signal input to the top attenuator is chained to the bottom two in series. Introduction of a plug into middle or bottom input breaks the normalling system: 1 to 1-2-3, 1-2 to 2-3, 1-2-3 to 1-2-3.
Read more
MRP:$116.09 SAVE 19%
 1 in stock $93.47
Click for better price!
or call +44 20 7424 1960
quote 780130
AION Modular CP3 Mixer Inputs Module With 2U-3U Adapters
Cat: 780123 Rel: 07 Jul 20
 
Mixer module
Notes: The CP3 module is a 4 x 1 mixer with positive and negative outputs and a maximum gain of two. This mixer can combine both AC and/or DC voltages. The module has a switch which, in the ON position, allows unwanted spikes to be removed from the waveforms. There is also a passive multiple.

Input Impedance: 25k ohms
Output Impedance: 100 ohms
S/N Ratios: better than 60dB
Read more
MRP:$336.54 SAVE 20%
 1 in stock $270.65
Click for better price!
or call +44 20 7424 1960
quote 780123
AJH Synth Entropic Doom Voltage Controlled Noisillator Module (black)
Cat: 763098 Rel: 04 Feb 20
 
controlled noisillator module
Notes: Really clever noise-based oscillator from AJH. Drones, sweeps and bleeps aplenty, ranging from tamed to out-of-control filth. Also doubles up as a more conventional ring mod and distortion module.

Supplier's notes:
This 14HP wide module is a voltage controlled noise based oscillator, or noisillator for short. It generates 1/f noise and this is then sent through a feedback loop which allows the noise to be "tuned" to varying degrees depending on the settings of the frequency and resonance controls, or incoming frequency or resonance CV's. The tuned circuit can be FM modulated too, for some thunderous sweeping sounds. We have bright and dark outputs, which are pre and post filter respectively. The Bright output will always have a degree of noise present in the signal, whereas the Dark output can be tuned noise only when 4 pole resonance is selected. We also have an external Sync input, which will reset the resonant waveform, and we also have an Audio input, so that an external signal can be mixed into the resonant loop. Combinations of external waveforms to these two inputs can create some massive drone sounds, or sweeping sync sounds.

There is also an XOR ring modulator, which can be used as a module in its own right too. Lastly, we have an XOR amplifier, which is another independant circuit that can be used to add noise and distortion to any audio signal.
Read more
MRP:$306.53 SAVE 17%
 1 in stock $254.36
Click for better price!
or call +44 20 7424 1960
quote 763098
AJH Synth Lunar Module Apollo Mission Communicator Module (black)
Notes: Truly unique one from AJH, based on the sound of NASA's Apollo voice transmissions. Think outside the box and process drums and synths through this thing. Freaky. May or may not allow you to communicate with real astronauts.

Supplier's notes:
Here's a bit of fun for all fans of space missions from the previous century! This module is designed to re-create the ground to space and space to ground transissions from the Apollo era.

To be "Mission Control Houston" the Quindar PTT (push to talk) button adds a short 2,525Hz Qindar tone to the start of the transission, then at the end of the message the PTT button or switch is released and a short 2,475Hz Quindar tone is added to the audio. The bandwidth is slightly reduced in this mode.

For "Astronaut comms" we press the Capsule PTT switch, which allows us to add coloured noise, distortion, bandwidth reduction and either hum or LGM (Little green men space tone) noise to the audio signal. A deep space electret condenser mic is supplied and an be used with the MIC input.

Obviously the Lunar Module can also be used to add noise, hum, distortion, bandwidth reduction and LGM noise tone to any modular level audio too, and if the mic is left attached theremin like sounds can be added too with careful loudspeaker feedback.

Read more
MRP:$273.92 SAVE 17%
 2 in stock $226.09
Click for better price!
or call +44 20 7424 1960
quote 763099
AJH Synth Mini Mod Precision Voltages Module (black)
Cat: 755446 Rel: 07 Nov 19
 
Precision voltages module - dark edition
Notes: Sometimes real precision is required with pitch control voltages - this module features a super accurate "Cal" output, which is accurate to <1mV over 20V, translates to one cent over 20 octaves! It is ideal for calibrating the scaling of VCO's, indeed we have been using our own version of this circuit to calibrate our own MiniMod VCO's for the last three years.

As well as being a precision voltage source it is also a very accurate voltage adder, it has two channels (A & B) and both full volts (octaves) or 1/12th volt increments (notes) can be either added to or subtracted from the incoming signal. Perfect for adding a voltage offset to the output of a sequencer or it can be used to add switchable octaves to a VCO which only has course and fine tunes controls.

It also has a "mix" output, which allows either A channel on its own, or with the three way toggle switch channel B can either be added to, or subtracted from channel B, and this is in addition to the addition and subtraction per channel mentioned earlier.

Dimensions: 10HP wide, 26mm Deep
Read more
MRP:$273.92 SAVE 17%
 2 in stock $228.27
Click for better price!
or call +44 20 7424 1960
quote 755446
ALM mmMidi MIDI CV & Clock Interface Module
Cat: 757946 Rel: 09 Dec 19
 
Compact & straightforward MIDI interface - 4HP
Notes: The mmMidi is a simple & compact MIDI to CV interface for your Eurorack synthesiser. It translates both MIDI clock and 2 Channels of MIDI note, velocity and gate information to corresponding voltage control signals. The mmMidi is quick to set up and requires minimal configuration.
Read more
 3 in stock $105.43
Click for better price!
or call +44 20 7424 1960
quote 757946
ALM mmT Trigger Expander Module For mmMidi
Cat: 757948 Rel: 09 Dec 19
 
Expander for the mmMIDI, adding 8 additional gate outputs
Notes: The 'mmT' is an optional 3HP expander which connects directly to the mmMidi. It maps a third MIDI channel's key presses to 8 trigger/gate outputs as shown on the mmT front panel.
Read more
 1 in stock $85.87
Click for better price!
or call +44 20 7424 1960
quote 757948
Analogue Systems RS-500N Synthifilter Module
Cat: 777032 Rel: 26 Jun 20
 
filter module
Notes: Genuine EMS synthi filter, with redesigned faceplate!

This legendary filter can be switched between pre1974 and post 1974 filter type and response. For the first time response can be voltage controlled which was designed on the circuit board but not available on the matrix. This module is made under license from EMS. The only officially licensed remake of the EMS diode lowpass filter used in the VCS3 and AKS synths. It´s a faithful recreation of the original circuit, featuring some modifications that are also done on vintage EMS equipment, like a switchable faster CV response option for very quick modulations. Another switch determines if the filter has 18dB/oct slope as used by EMS pre-1974 or 24dB. The cutoff frequency and also the resonance are voltage controllable. Signal inputs and outputs have level controls.
Read more
MRP:$273.92 SAVE 16%
 1 in stock $229.35
Click for better price!
or call +44 20 7424 1960
quote 777032
Analogue Systems RS-510N Synthishaper Module
Cat: 777036 Rel: 02 Jul 20
 
LFO/envelope generator module
Notes: The Synthishaper module is made under license of the EMS and is a remake of the EMS envelope shaper known from VCS3, Synthi A and AKS.

It is a very unique modulator which can be used as a trapeze or triangle shape LFO and/or a attack-hold-decay envelope generator. For the real EMS feeling combine the 500e Filter with the 510 Trapezoid. The Trapezoid Generator has Attack, On, Decay, Off parameters. The "Off" parameter can determine a amount of time until the envelope can be re-triggered. A very short "off" time will make the unit loop, changing it into a LFO. VC of Decay time, Gate input and a manual trigger button. Two signal outputs that can be adjusted in level in polarity with one common knob. Additionally the module has an internal VCA which explains the Signal in- and output and is being controlled by the trapezoid signal.
Read more
MRP:$354.80
 1 in stock $322.83
Click for better price!
or call +44 20 7424 1960
quote 777036
Analogue Systems RS-95N VCO Dual Bus Module
Cat: 776867 Rel: 26 Jun 20
 
oscillator module
Notes: The RS-95N oscillator is a premium, british sounding VCO with waveshaping possiblities. It has a new front panel design with elongated holes.

It is based on the RS-90 but has more features, predominantly a very special sine wave.

The RS-95N presented here is technically identical but instead a normal frequency control it features a gorgeous, lockable potentiometer with ten turns. This allows precise fine tune control and adds the look of an EMS synthesiser to the VCO.

The module has three audio outputs: pulse, triangle and sine.

The upper shape control affects the pulse width. The lower shape control not only morphs from a falling sawtooth over triangle to a rising saw (or ramp) but simultaneously alters the sine wave and produces a kind of smoothed, softer sawtooth. Additionally the saw/sine output is a CV-INPUT for the symmetry of the sine. Very extraordinary feature that all are voltage controllable.

The oscillator sync is "soft" and not only reacts to square waves but works with all waveforms.

The frequency control has three switchable modes:

STD (standard) with a range of two octaves.
2 is two octaves lower than STD.
WIDE mode gives a range from 0.3 Hz - 17kHz and thus allows use of the RS-95 as VC-LFO with waveshaping options!
The "vary" control not only attenuates but also can amplify the pitch CV. It controls linearly from 0V over 1V/oct to 0.4 V/oct.
Read more
MRP:$326.10 SAVE 17%
 1 in stock $271.75
Animal Factory Godeater Distortion Module
Cat: 760202 Rel: 10 Mar 20
 
distortion module
Notes: A legendary German band that influenced industrial music for years to come. A young drum virtuoso and breakout techno talent. A recording engineer to the likes of St. Vincent, Queens of the Stone Age and Ozzy Osbourne. A former Dire Straits and Paul McCartney drummer. A multifaceted producer and DJ who can play the most underground cuts to audiences of 35000 while producing for the likes of Lady Gaga and Frank Ocean. A hard techno legend known for smashing raves around the world with long, powerful live sets.

All of the above have offered praise for the Godeater pedal and consider it a pivotal part of their arsenal, with good reason. The extreme saturation of the low end guarantees a bass distortion like no other, making it no longer a necessity but a matter of aesthetic choice whether to dial the clean in or not.

Popular demand dictated that we release the Godeater in Eurorack format - after almost two years of research and development, it's finally in production. The delay gave us time to understand what people wanted from this module, and gave us the inputs we needed to make this one seriously special. This module offers CV control over almost every parameter without compromising on the signature sound that users of noisy things the world over have fallen in love with.
Read more
MRP:$305.23 SAVE 19%
 4 in stock $247.84
Click for better price!
or call +44 20 7424 1960
quote 760202
Animal Factory Godeater Distortion Module (B-STOCK)
Cat: 779154 Rel: 10 Mar 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


A legendary German band that influenced industrial music for years to come. A young drum virtuoso and breakout techno talent. A recording engineer to the likes of St. Vincent, Queens of the Stone Age and Ozzy Osbourne. A former Dire Straits and Paul McCartney drummer. A multifaceted producer and DJ who can play the most underground cuts to audiences of 35000 while producing for the likes of Lady Gaga and Frank Ocean. A hard techno legend known for smashing raves around the world with long, powerful live sets.

All of the above have offered praise for the Godeater pedal and consider it a pivotal part of their arsenal, with good reason. The extreme saturation of the low end guarantees a bass distortion like no other, making it no longer a necessity but a matter of aesthetic choice whether to dial the clean in or not.

Popular demand dictated that we release the Godeater in Eurorack format - after almost two years of research and development, it's finally in production. The delay gave us time to understand what people wanted from this module, and gave us the inputs we needed to make this one seriously special. This module offers CV control over almost every parameter without compromising on the signature sound that users of noisy things the world over have fallen in love with.
Read more
 1 in stock $235.41
Animal Factory Godeater Distortion Module (B-STOCK)
Cat: 777207 Rel: 10 Mar 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


A legendary German band that influenced industrial music for years to come. A young drum virtuoso and breakout techno talent. A recording engineer to the likes of St. Vincent, Queens of the Stone Age and Ozzy Osbourne. A former Dire Straits and Paul McCartney drummer. A multifaceted producer and DJ who can play the most underground cuts to audiences of 35000 while producing for the likes of Lady Gaga and Frank Ocean. A hard techno legend known for smashing raves around the world with long, powerful live sets.

All of the above have offered praise for the Godeater pedal and consider it a pivotal part of their arsenal, with good reason. The extreme saturation of the low end guarantees a bass distortion like no other, making it no longer a necessity but a matter of aesthetic choice whether to dial the clean in or not.

Popular demand dictated that we release the Godeater in Eurorack format - after almost two years of research and development, it's finally in production. The delay gave us time to understand what people wanted from this module, and gave us the inputs we needed to make this one seriously special. This module offers CV control over almost every parameter without compromising on the signature sound that users of noisy things the world over have fallen in love with.
Read more
 1 in stock $234.99
Befaco CV Thing Voltage Controlled MIDI Controller Module
Cat: 775217 Rel: 08 Jul 20
 
MIDI controller module
Notes: A 6 HP version of the VCMC module. Simpler, less connectivity but all the flexibility and power from VCMC.

It's the exact same concept as the VCMC in that you pump in CV and control MIDI gear or your DAW and software instruments but in a much smaller package. The faders and buttons have been droppws and just give you 8 CV inputs, a big white knob and that rather nice little screen. The MIDI connections are taken care of by a TRS socket and USB for direct connection to a computer.

Essentially, you've lost the manual controls over MIDI gear that the faders and buttons provided and are just going straight with triggers, notes or modulation.

Each of the 8 CV inputs can be mapped to any MIDI message or controller number, note or event. You can send clock, program changes, note on/off and everything you'd expect in MIDI. It's a pretty great way of connecting your modular to your external instruments or software while keeping the control in the Eurorack rather than ceding control to the DAW. And if you prefer things the other way around then Befaco also makes a MIDI Thing MIDI-to-CV interface.
Read more
MRP:$335.23 SAVE 28%
 5 in stock $240.22
Befaco i4 Instrument Interface Preamp Module (assembled)
Cat: 749081 Rel: 25 Oct 19
 
Eurorack instrument interface with Neutrik combo connector - 8HP
Notes: Instrument Interface is a Eurorack pre-amp capable of bringing any type of audio signal to modular levels, thanks to its amplification circuit.

The module can drive regular and condenser microphones (+48V Phantom Powered), as well as Instrument and Line signals with a very low distortion ratio.

Going further from the regular re-amp operation, Instrument Interface offers some additional extra functions like a Trig/Gate extractor and Envelope Follower circuits, allowing you to use the character of your audio signal in more creative ways.
Read more
MRP:$285.66 SAVE 21%
 2 in stock $225.00
Click for better price!
or call +44 20 7424 1960
quote 749081
Befaco Inamp Module (assembled)
Cat: 749089 Rel: 24 Oct 19
 
Dual pre-amplifier module - 4HP
Notes: Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks.

Both inputs are summed so you can use them at the same time as an input mixer.

The unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there (Domestic line levels) as well as some guitars (Humbucker-like pickups and so).

The first channel is normalled to second one in series, so it's possible to have two stages of amplification or two separate ones.
Read more
MRP:$176.09 SAVE 42%
 3 in stock $102.17
Befaco VCMC Voltage Controlled MIDI Controller Module (assembled)
Cat: 739915 Rel: 24 Oct 19
 
Full voltage-controlled instrument interface
Notes: Interesting MIDI option for Eurorack. Eight faders and buttons, mappable to MIDI note, CC and lots more parameters, then controllable using CV and gate signals. Versatile.

Supplier's notes:
A fully editable MIDI controller with eight faders and push buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured independently for further control.

Each control on VCMC can be edited on its OLED screen and will be output either via DIN-5 or USB as a class compliant MIDI device.

- Current needs: +12V: 64mA, -12V: 12mA
- Width: 20 HP
- Depth: 30 mm
- Aluminium, heat-treated front panel
Read more
MRP:$416.10 SAVE 21%
 5 in stock $330.44
Click for better price!
or call +44 20 7424 1960
quote 739915
Behringer 902 VCA Module
Behringer 902 VCA Module (eurorack module)
Cat: 772937 Rel: 19 Jun 20
 
VCA module
Notes: Enter the Behringer 902 VOLTAGE CONTROLLED AMPLIFIER. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 series attenuators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 902 module features two signal inputs and two signal outputs that can be used to amplify two sources, either audio or control voltage, at the same time via a 3.5 mm connector. A rocker switch allows you to toggle between linear and logarithmic response modes while you can manually set the control voltage with the Fixed Control Voltage knob. Control inputs at the bottom of the module can accept control voltage signals from other modules to be change the amplification level.

Installing the 902 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 902 to be mixed with other synth modules for a truly unique set up.
Read more
 3 in stock $57.60
Click for better price!
or call +44 20 7424 1960
quote 772937
Behringer 904A VC Low Pass Filter Module
Cat: 772780 Rel: 19 Jun 20
 
low pass filter module
Notes: No prizes for guessing that this one's inspired by the legendary Moog 904-A filter, but offered at Behringer's hugely tempting affordable price point. Silky, fat filter with tons of character.

Supplier notes:
Enter the Behringer 904A VOLTAGE CONTROLLED LOW PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55, 35 & 15 Series from the 70s used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55, 35 & 15 Series from the 70s used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904A VOLTAGE CONTROLLED LOW PASS FILTER features a cutoff frequency knob that lets you decide which frequencies to attenuate. The resulting frequency is determined by this knob giving you the ability to change your sound with one turn.

Three Control Inputs plus audio ins and outs are available to send the processed signal to other modules and to connect voltage signals from other modules to affect the cutoff frequency.

The 904A VOLTAGE CONTROLLED LOW PASS FILTER provides you control of the resulting frequency and internal feedback with the Fixed Control Voltage and the Regeneration knob. A switch also allows you to command the frequency range by letting you decide which frequency band you want to operate in. This gives you real-time access to all important parameters with one module.
Read more
 4 in stock $106.52
Click for better price!
or call +44 20 7424 1960
quote 772780
Behringer 911 Envelope Generator Module
Cat: 772936 Rel: 19 Jun 20
 
envelope generator module
Notes: Enter the Behringer 911 Analog Envelope Generator. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 series envelope generators used by the world's most famous pop, rock and jazz musicians. Now musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth to complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 911 Module allows you to create a deeply contoured signal with its 4 independent controls for Attack (T1), Decay (T2), Release (T3) and Sustain levels from 0 to +5 Volts. Create snappy and percussive sounds or long evolving drones perfect for a funky groove or a brooding soundtrack to your latest cyberpunk epic.

For a more flexible setup, the 911 features a trigger input where you can connect an external trigger system like a keyboard via a 3.5mm TS cable as well as an output to send the envelope to another module

Installing the 911 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 911 to be mixed with other synth modules for a truly unique set up.
Read more
 3 in stock $51.08
Click for better price!
or call +44 20 7424 1960
quote 772936
Behringer 911A Dual Trigger Delay Module
Cat: 773000 Rel: 19 Jun 20
 
dual trigger delay module
Notes: Enter the Behringer 911A DUAL TRIGGER DELAY. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 911A comes with two delay triggers with their own delay time controls ranging from 2 ms up to 10 seconds and their own 3.5 mm S-Trig ins and outs. Connect the 911A to the Behringer 911 ENVELOPE GENERATOR module and turn your Attack/Decay/Sustain/Release (ADSR) module into a Delay/Attack/Decay/Sustain/Release (DADSR) module. Rather than just playing the note when the signal is triggered, the 911A creates a nice volume swell effect, rising from 0 until the peak volume then going through the rest of the phases set in the envelope generator.

The delays in the 911A can be coupled in three different ways. In the Off setting, the delays are triggered separately via the trigger inputs. In Parallel mode, the trigger connected to the input at the top section will activate both delays at the same time. Switching the knob to Series will trigger the top section first then the lower section after.

Installing the 911A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 911A to be mixed with other synth modules for a truly unique set up.
Read more
 9 in stock $54.34
Click for better price!
or call +44 20 7424 1960
quote 773000
Behringer 921A Oscillator Driver Module
Cat: 772998 Rel: 19 Jun 20
 
oscillator driver module
Notes: Enter the Behringer 921A OSCILLATOR DRIVER. An authentic reproduction of the circuitry from the Modular 55 and 35 series oscillator drivers used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921A OSCILLATOR DRIVER module features a frequency knob that can adjust between either octave or semitone frequencies. The included rocker switch can be used to select between the two frequency types. The width of the rectangular wave is adjusted via a control knob that goes from 10% up to 90%. You can also connect any incoming control voltage or modulation signal into either of the 3.5 mm Frequency or Width inputs.

The 921A not only controls just one 921B Oscillator, but 12 of them- providing you with more flexibility and more nuanced waveforms.

Installing the 921A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921A to be mixed with other synth modules for a truly unique set up.
Read more
 7 in stock $84.77
Click for better price!
or call +44 20 7424 1960
quote 772998
Behringer 962 Sequential Switch Module
Cat: 772888 Rel: 19 Jun 20
 
sequential switch module
Notes: Enter the Behringer 962 SEQUENTIAL SWITCH Module. An authentic reproduction of the discrete circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 962 is used as a latch, shifter and signal selector. Depending on the number of input jacks plugged into the module, the 962 can alternate between two or three signal inputs. It can also be used to expand the Behringer 960 SEQUENTIAL CONTROLLER from an 8-step sequencer up to a 24-step sequencer.

The 962 SEQUENTIAL SWITCH features 3-channel V-Trig inputs for selecting CV input channels and separate V-Trig outputs per channel. Triggers from other modules can be connected via 3.5 mm cables and can be manually selected with the Trigger buttons.

The SIG IN jacks are what allow the 962 to alternate between inputs. Connect an input signal to input 1 or 2 and the 962 will alternate between these two inputs. If all three inputs are used, then the module will automatically alternate between the three stages.

Installing the 962 SEQUENTIAL SWITCH is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 962 SEQUENTIAL SWITCH to be mixed with other synth modules for a truly unique set up.
Read more
 7 in stock $61.95
Click for better price!
or call +44 20 7424 1960
quote 772888
Behringer 992 Control Voltages Module
Cat: 772814 Rel: 19 Jun 20
 
Control voltages module
Notes: Enter the Behringer 992 CONTROL VOLTAGES Module. An authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 992 CONTROL VOLTAGES features 4 channels for CV signals routing to the 904A LPF module. This allows your sound to be freely connected/disconnected with a flip of a switch. Putting the switch in its up position means that you are allowing your signals to connect to other modules and vice versa.

An external input is available If you have an additional input you want to connect to the 992 CONTROL VOLTAGES module. And with the inverting Attenuator knob, you can adjust the CV level of this signal by turning it clockwise to adjust the CV level from 0 to 10 or counterclockwise to change it from 0 to -10.

3 switched and summed CV inputs are present for the frequency control of VCF modules which can be connected via 3.5 mm TS cables. The 992 CONTROL VOLTAGES allows you to send out the combined voltage from all 4 inputs via 3 parallel CV outputs; which can drive multiple 904A LPF and 904B HPF modules for an unlimited number of sonic combinations.

Installing the 992 CONTROL VOLTAGES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 992 CONTROL VOLTAGES to be mixed with other synth modules for a truly unique set up.

Read more
 8 in stock $50.00
Behringer CP3A-O Oscillator Controller Module
Cat: 772823 Rel: 19 Jun 20
 
oscillator controller module
Notes: Enter the Behringer CP3A-O OSCILLATOR CONTROLLER module. An authentic reproduction of the circuitry from the Modular 55 and 35 series mixers used by the world's most famous pop, rock and jazz musicians. Now musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The CP3A-O Module features 4 routing switches that enable you to send Control Voltages to one or more oscillators. Switches 1 to 3 are connected to Control Inputs 1, 2 and 3; switch 4 can be used to route an external Control Voltage signal via a 3.5 mm TS plug and can be controlled by an attenuator knob.

You can route up to three external control voltage signals to any of the three summed Control Inputs. Signals from these inputs can be combined by flipping any of the matching routing switches on. The parallel jacks at the bottom will route the final combined voltage signal to any module they're connected to. A great way to utilize the CP3A-O is to have it drive multiple 921A or B oscillator modules which can allow you to create more intricate patches and hours and hours of fun.

Installing the CP3A-O is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the CP3A-O to be mixed with other synth modules for a truly unique set up.
Read more
 7 in stock $46.74
BLM 10 Stage Steiner VCF Module
Cat: 774014 Rel: 13 May 20
 
VCF module
Notes: This product is an analog filter that processes -5v/+5v synth level audio signals. This particular product is using a 10 stage diode ladder circuit influenced from a classic Steiner filter.

Width: 10hp
Current: +16mA,-15mA

16 mA +12V
15 mA -12V
32 mm deep
Read more
MRP:$168.27 SAVE 17%
 2 in stock $140.22
Click for better price!
or call +44 20 7424 1960
quote 774014
BLM Accented Asteroid Bass Drum Module
Cat: 774002 Rel: 13 May 20
 
bass drum module
Notes: This module use the classic 'twin T' circuit to generate a sine wave for percussion and drum duties. This particular module has an additional accent circuit. The accent circuit allows for volume changes when two trigger sources are used. This module covers a good spectrum of possible classic drum sounds : 808, 909, Gabber, wood blocks, etc.

There is a boost circuit to push the sine wave into a square wave shape.

Control: Tune knob, Sweep (like a fine knob), Tone knob (muffled or pop sound), Decay knob, accent knob, and boost knob.

Jacks: Accent trigger input, Trigger input, and BD output.

Operation is straight forward. You patch a trigger signal into the trigger input and use the Out jack to hear the drum sound. The toggle switch allows for long 808 style drums, middle position for shorter drums, and toggle right for shorter stuff.

For default position sound exploring have the tune knob fully clockwise and sweep knob in the middle. Then use the fine knob to fine tune the pitch. If you require a lower range then turn the tune knob a bit counter clockwise, and use the Sweep knob to again fine tune.

When using the Accent circuit, you will hear better results when the accent knob is middle position. If the accent knob is fully clockwise the effect is less noticeable.

32mm deep.
Read more
MRP:$173.49 SAVE 17%
 1 in stock $144.57
Click for better price!
or call +44 20 7424 1960
quote 774002
BLM Accented Percussion Envelope Generator Module
Cat: 774006 Rel: 13 May 20
 
envelope generator module
Notes: Module: Accented Percussion Envelope Module (APE)

envelope generator, percussion, vca

Width: 6hp

Depth: 32mm , 1.26 inches clearance

Current: +19mA, -32mA

Circuits: Attack Decay Envelope Generator, and VCA's.

What does this module do?

This module allows you to add that dynamic 'accented' sound found in vintage gear like the Pearl SY-1 without having to build one of those kits, or hunt down the original. This module was influenced by such gear, but with modern parts. The goal was not to clone, but to get you really close results.

-There is a vca on the envelope output (DEPTH) with it's own CV Level input. This Dynamic Envelope has it's own output to give external vco's a 'pitch' ability. To do Disco 'POW' for example.



-There is another vca set up with CV Accent control just for the audio input.


If you patch up a sequencer, you can get very close results to the DFAM envelope portion.

*Gate or trigger input mode.

*3 modes for envelope time: Long, Perc (middle), and Short.
Read more
MRP:$116.09 SAVE 17%
 1 in stock $96.75
Click for better price!
or call +44 20 7424 1960
quote 774006
150/273(ページ1/6)の商品
1  2  3  4  5  6  »

Filter

Synth modules
DJ機器
Release Date
Close