安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

ホーム  Equipment  

Synth modules

Options
150/342(ページ1/7)の商品
1  2  3  4  5  6  7  »
Subscribe to our weekly Studio Equipment emails
1010 Music Bitbox Micro Compact Sampling Module
Cat: 775080 Rel: 22 Jun 20
 
sampling module
Notes: Compact take on the Bitbox sampler, also offered as the larger Mk2 version. Touchscreen-based design allowing up to eight stereo samples, recording directly or loaded from SD card.

Supplier notes:
Bitbox micro provides Eurorack sampling for smaller racks and smaller budgets. In only 18 HP of rack space you can get a touch screen based sampler with support for 8 stereo sample pads. Now you can record samples directly into the module or load them from the microSD card. Trigger your samples via CV or MIDI, then apply effects and mix the outputs. Save your configurations to multiple presets for later reuse.

Sample Playback

Play up to 24 stereo polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger stereo samples streaming directly from the microSD card
Configure 8 stereo sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Sample Recording

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Automate recording of a multi-sample bank via MIDI and CV
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer

Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode

Inputs and Outputs
Use the 8 inputs the way you want: assignments include a stereo audio input, up to 8 gate inputs, up to 8 CV inputs and 1 clock input.
Route the audio from each pad out to one of 3 stereo audio outputs or one of 6 mono audio outputs
Listen to all of the pad outputs combined on the master stereo output

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode - no need to look up CC numbers
Module Features
Use the 2? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Refine your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Inputs and outputs are DC coupled so you can record and play out CV signals
Read more
MRP:$552.24 SAVE 16%
 More than 10 in stock $465.73
Click for better price!
or call +44 20 7424 1960
quote 775080
1010 Music Bitbox Mk2 Intuitive Sampling Module
Cat: 775085 Rel: 22 Jun 20
 
sampling module
Notes: Updated version of the excellent Bitbox sampler module offers more powerful sound processing and an improved touch screen. Improved effects and mixing with all the same creative power of the original.

Supplier notes:
Bitbox mk2 delivers powerful sampling and mangling for Eurorack. With this module you can add recording, sample playback, clip launching, slicing, granular sounds and musically intelligent looping capabilities to your Eurorack rig. With a 3.5 inch touchscreen, bitbox mk2 makes easy work of selecting, editing, and tweaking your samples. You can stream large samples of up to 4 GB file size straight from the microSD card. Interact with other musical components via CV and MIDI. Tweak your configurations to get them just right, then save them to multiple presets for future reuse. With the new bitbox mk2 hardware, you can now do more with the new more powerful processor.

Sample Playback
Play up to 24 polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger samples streaming directly from the microSD card
Configure 16 sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Use MIDI for polyphonic playback of samples or slices
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer
Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode
Inputs and Outputs
Connect up to 8 CV modulators to control numerous sample parameters
Trigger each of the 16 pads with a dedicated gate input
Record through the dedicated stereo audio input pair
Use CV to keep time through the dedicated clock input
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Route the audio from each pad out to one of 2 stereo audio output pairs or any of the corresponding single channels
Inputs and outputs are DC coupled so you can record and play out CV signals

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Trigger each pad independently through a dedicated gate input
Use MIDI to trigger pads via a note per pad
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode- no need to look up CC numbers
Module Features
Use the 3.5? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Fill out your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Select Flipped UI mode to mount the unit with the screen on the bottom and use the screen, knobs, buttons, and CV jacks as you normally would
Read more
MRP:$823.70 SAVE 24%
 2 in stock $629.86
Click for better price!
or call +44 20 7424 1960
quote 775085
2hp Comp Module (black faceplate)
2hp
Cat: 766649 Rel: 13 Jul 20
 
Compressor module
Notes: Compressor with side chain functionality.
Read more
MRP:$163.68 SAVE 17%
 2 in stock $136.38
Click for better price!
or call +44 20 7424 1960
quote 766649
2hp Comp Module (silver faceplate)
2hp
Cat: 766648 Rel: 13 Jul 20
 
Compressor module
Notes: Compressor with side chain functionality.
Read more
MRP:$163.68 SAVE 17%
 1 in stock $136.38
Click for better price!
or call +44 20 7424 1960
quote 766648
2hp Pmkn Mult Signal Splitter Module (limited edition module)
2hp
Cat: 797074 Rel: 26 Oct 20
 
2-input/6-output signal splitter module
Notes: The Limited Edition Pumpkin Mult is here! Craft sonic concoctions with this pulp-free multiplier, exclusive for a limited time.

Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.

Read more
 2 in stock $37.70
4ms Ensemble Oscillator Module
Cat: 762166 Rel: 18 May 20
 
polyphonic oscillator module
Notes: Seriously potent polyphonic voice built around 16 sine-based oscillators. Capable of a huge range of tones thanks to FM, phase distortion and wavefolding. Another cracker from a consistently reliable brand.

Supplier's notes:
The Ensemble Oscillator is a unified polyphonic voice of sixteen complex oscillators combining additive, FM, phase-distortion and wavefolding synthesis techniques in new unorthodox ways. By quantizing the oscillators to scales or series of harmonics, the Ensemble Oscillator allows you to explore the sonic boundary between musical chords and rich evolving textures. Easily create a wide variety of sounds ranging from aggregates of pure sine waves to pulsar synthesis or pristine harmonic tones and lush wide chords to rich dirty drones and rumbling glitches. Custom scales can quickly be "learned" and saved using a CV keyboard or by manually entering notes with the controls.

The Ensemble Oscillator is designed by Matthias Puech and 4ms Company.

30 factory-programmed, user-writeable scales organized in three groups:
12TET: all notes quantized to equal temperament, repeating over octaves
Octave: unquantized notes, repeating over octaves
Free: unquantized notes, repeating over the interval between the lowest and highest note

16HP Eurorack format module
0.98" (25mm) maximum depth (including power cable)
10-pin to 16-pin Eurorack power header
Power consumption
+12V: 114mA maximum
-12V: 45mA maximum
+5V: 0mA (not used)
Audio outputs
Frequency range: 0Hz (DC) - 20kHz
Typical amplitude: 10Vpp
Maximum amplitude: 18.5Vpp
1V/oct inputs (Root and Pitch)
Voltage range: -2V to +6V (8 octave range)
Factory calibrated to 1.00V/oct
Per-jack user-calibration allows from 0.7V/oct to 1.3V/oct
CV inputs (other than 1V/oct)
Voltage range: -5V to +5V
Gate inputs
Trigger threshold: 2.5V
User memory (non-volatile)
Scale slots: 30
Shift feature settings
1V/oct calibration settings
Read more
MRP:$411.19 SAVE 27%
 2 in stock $298.30
Click for better price!
or call +44 20 7424 1960
quote 762166
4MS Percussion Interface & Expander Modules
Cat: 794765 Rel: 30 Oct 20
 
Envelope follower/envelope generator/external/expander synth module
Notes: Nice dual-module gate/envelope generator which can run off any audio signal. Feed it drums, synths, samples or a mic input and and generate CV modulation signals.

Supplier's Notes:
The Percussion Interface (PI) and PI Expander are a pair of Eurorack modules that generate gates and envelopes from acoustic drums, samplers, drum machines, and virtually any audio source.

Converting microphone, instrument, line and modular signals into CV and clock/gate signals, the PI and PI Expander are suited for synchronizing sequencers or other modules to the rhythm of an audio track or live percussion. The modules can simultaneously be used as a pre-amp for microphones or line-level signals, while generating inverted envelopes useful for side-chaining. The PI module contains all the core functionality and can be used without the Expander to conserve space. The Expander requires the main PI modules and adds three gain stage options, a modular-level audio output jack, a 1/4" (6.35mm) input jack, and envelope attenuation capabilities. The two modules are only sold together, they are not available separately.

Electrical and Mechanical Specifications:
Module size (PI):
4 HP Eurorack formal module
0.98" (25mm) maximum depth with power cable
10-pin Eurorack power header

Module size (PI EXP):
4 HP Eurorack formal module
0.98" (25mm) maximum depth with power cable
8-pin cable connects to PI

Power consumption:
with PI Expander
+12V: 104mA
-12V: 65mA
without PI Expander
+12V: 69mA
-12V: 56mA

Audio Inputs:
1/8" [3.5mm] on PI main module, and 1/4" [6.35mm] on PI Expander
100k input impedance, AC-coupled

Audio Outputs:
Voltage range: -10.4V to +10.8V, DC-coupled
1k output impedance
Gain Characteristics
Gain range: < -100dB to +54dB (500x)
Clip light turns blue when signal (post-gain) exceeds 2.5Vpp
Gate is triggered when signal (post-gain) exceeds 6.3Vpp
Clip light flashes red when signal clips on Audio Out jack (exceeds +10.8V)
Gate Out Jack
1k output impedance
+8V gate/trigger signal
6ms - 0.5s pulse width
+ Env Out jack (jack on PI main module)
1k output impedance
+9V peak (sustain), -60mV resting (off)
15ms attack time
70ms - 6s exponential decay time (1% of peak voltage)
- Env Out Jack (jack on PI main module)
1k output impedance
+9V resting (off), -150mV peak (sustain)
15ms attack time
70ms - 6s exponential decay time (1% of peak voltage)
Env. Out jack (attenuated jack on PI Expander)
1k to 26k variable output impedance
+9V maximum
-60mV minimum
Inv. Out jack (attenuated jack on PI Expander)
1k to 26k variable output impedance
+9V maximum
-150mV minimum
Included with the PI+EXP:
8-to-16 pin power cable
8-to-8 pin cable for connecting to the Expander
M3 Knurlie screws (4)
Read more
MRP:$200.94 SAVE 21%
 7 in stock $159.68
Click for better price!
or call +44 20 7424 1960
quote 794765
ACL Mini MIDI USB MIDI To CV Converter Module
Cat: 776679 Rel: 06 Aug 20
 
MIDI to CV converter module
Notes: Compact solution for converting MIDI signals to Eurorack-friendly CV. USB in from hardware devices or a host DAW. Pitch, gate, clock, start/stop and CC outputs. Simple but effective.

Supplier notes:
The ACL MINI MIDI is a USB MIDI to CV convertor module in a small module.

It uses MIDI CLOCK, START/STOP, one selectable MIDI Controller and a monophonic MIDI Note to be converted to Eurorack compatible CV, GATE and clock signals.

It can be used as USB MIDI to CV interface by connecting to your computer via the USB B port. A Class Compliant USB MIDI device can be connected to the USB A port.
Read more
MRP:$357.96 SAVE 23%
 2 in stock $275.02
ACL Pan Mix Mixer Module
ACL Pan Mix Mixer Module (synth module)
Cat: 776671 Rel: 30 Jun 20
 
mixer module
Notes: The ACL Pan Mix module mixes up to four different mono sources into a stereo output with panorama and gain control. It also includes an stereo aux input, which will be added unity gain to the sum for cascading purposes.
Read more
MRP:$268.80 SAVE 26%
 3 in stock $198.50
ACL Sum Sum Mixer Module
ACL Sum Sum Mixer Module (synth module)
Cat: 776668 Rel: 30 Jun 20
 
mixer module
Notes: The ACL SUM SUM consists of two rows of six inputs that are summed into one output each.

It can be used as a stereo signal summer or two mono signal summers, either audio or CV.

The internal gain of each row can be switched between Unity gain, a gain of 0.5 (-6dB) or 0.33 (-9.5dB) using convenient dip switches on the back of the module.
Read more
MRP:$179.64 SAVE 17%
 1 in stock $149.69
ADDAC System ADDAC104 VC T-Networks Module (black faceplate)
Cat: 776116 Rel: 08 Sep 20
 
4 voice module
Notes: Following the ADDAC103 T-Networks, this new module is also inspired by Twin T-Networks circuits used in many lengendary drum machines. A simple 4 voice module with frequency controls for each of the voices. This new module also features CV inputs with attenuverters for each voice Frequency. Due to the specificities of the circuit, and to keep the module at a low price, these inputs are not callibrated to 1v/octave.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.
Read more
 1 in stock $184.08
Click for better price!
or call +44 20 7424 1960
quote 776116
ADDAC System ADDAC106 T-Noiseworks Module (black faceplate)
Cat: 776120 Rel: 08 Sep 20
 
4 voice module
Notes: This is the last module in Addac System's T-Networks series, a straight forward 4 voice module with frequency and decay controls for each of the voices. As the name already unveils, a noise source has been added, and 2 different circuits have been created, that explore the timbre of a t-network when used to filter noise.

There are 2 different circuits in this module, voices 1 to 3 have a pre-vca t-network filter while in voice 4 the t-networks filter applied post-vca.

At each voice input there's a switch which sets which type of input to use, this signal will be used to control an internal VCA hence why the type of setting defined here is important:
1. Trigger - Any incoming CV will be converted into a 1ms trigger as soon as it crosses it's fixed threshold.
2. Mute - This disconnects then incoming signal effectivelly muting the voice.

3. Envelopes - This can be used with CV sources as well as Gate sources and simply follows the input signal.

This incoming signal will then be processed by a slew circuit which adds a decay factor allowing the user to set the "Tail" of each voice.

Trigger mode is mostly dedicated for percussive sounds while the Envelope mode is open to any external enve- lope control and able to control noise swooshes, swirls, crackles and pops simply out of t-networks filtered noise.

Audio inputs are also welcomed to be used as a Trigger/Envelope input.

Diferences between voices:
The first 3 voices also feature a Timbre selector switch: Hat/Snare
In Snare mode all frequencies coming from the t-networks filter pass thru to the output .
In Hat mode it adds a High Pass circuit which removes the mid/bottom frequencies (characteristic of the snare strike) creating a higher spectrum output which is closer to a Hat timbre.
All of these 3 voices are also differently tuned from each other to offer more timbrical options.

Voice 4 is closer to a typical t-networks circuit but this time peculiar one where the noise is gated by the vca and then sent through the t-networks filter.

Hat and Snare are terms used very looselly here, they are timbrical references and do not in any shape or form try to effectivelly replicate the complex timbres of a real world Hat or Snare.
Read more
MRP:$183.64
 2 in stock $178.54
Click for better price!
or call +44 20 7424 1960
quote 776120
ADDAC System ADDAC111 Ultra .WAV Player Module (red faceplate)
Cat: 776121 Rel: 08 Sep 20
 
.wav player module
Notes: The ADDAC111 ULTRA .WAV PLAYER is the long awaited upgrade to the praised ADDAC101 .WAV PLAYER.

While keeping all functions of the original, there's more dedicated controls as well as a few new functions.

For this version, Micro SD Cards were used- this decision was made in order to help the hardware construction and make it only 3cm deep.

An Expansion module, ADDAC111B, was also created to allow users to recall the first 8 files through dedicated trigger signals. This allows sequencing of files.

The Loop Size, Start Point and Sample Rate defines how the loop is played.

Loop Settings defines if sample is looping or playing only once.

File Access if it advances to the next or previous file.

The VCA section controls the overall volume of the module.

And finally the Envelope Follower generates a CV voltage related to the amplitude of the audio signal pre-VCA.
Read more
MRP:$641.40 SAVE 19%
 2 in stock $516.75
Click for better price!
or call +44 20 7424 1960
quote 776121
ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate)
Cat: 776125 Rel: 08 Sep 20
 
Expansion module
Notes: The ADDAC111B EXPANSION allows the user to access the first 8 files (a to h) through a trigger.

Files do not play simultaneously, if several triggers happen at the same time top priority goes from top to bottom- meaning that if B E and F triggers are received at once the file that will be played is file B.

The expansion module should be plugged to the back of the Ultra .Wav Player module. There's no connection to the bus boards.

Specificaitons:
Mechanical:
Format: Eurorack
Width: 16 hp
Depth: 3 cm

Control voltage i/o:
CV inputs: i 5v
CV outputs: 0 +10v

Electrical:
Max current: 150ma
Compatible with +-12v and +-15v power supplies
Bus board cable: 8x2 idc (doepfer style) connect
Read more
 1 in stock $137.50
Click for better price!
or call +44 20 7424 1960
quote 776125
ADDAC System ADDAC200S Size Matter Module (red faceplate)
Cat: 776135 Rel: 08 Sep 20
 
Adapter module
Notes: ADDAC System's 1/4 to 1/8 inch adapter allow you to connect one 1/4 inch jacks to an 1/8 inch one right in from your rack- now you can leave all those cable adapters behind.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 3.5 cm

Electrical:
- Passive
Read more
 1 in stock $60.97
Click for better price!
or call +44 20 7424 1960
quote 776135
ADDAC System ADDAC202 Amplifiers Module (red faceplate)
Cat: 776175 Rel: 08 Sep 20
 
Amplifier module
Notes: A dual channel Amplifier that either boosts your signals up to 10 times the original input or attenuates it to zero.

It also features two leds per channel, to monitor your output polarity.

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $137.50
Click for better price!
or call +44 20 7424 1960
quote 776175
ADDAC System ADDAC203 CV Mapping Module (gold faceplate)
Cat: 776164 Rel: 08 Sep 20
 
CV mapping module
Notes: With the ADDAC203 CV mapping you'll be able to tame that voltage range and put it where it belongs. The attenuation knob compresses your voltage range and then you can also offset it.

Two channels for your mapping needs.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 3 cm

Control Voltage I/O:
- CV inputs: i 10v
- CV outputs: i 10v

Electrical:
- Compatible with +-12v and +-15v power supplies?
- Max current: 50mA
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$200.94 SAVE 19%
 1 in stock $161.89
Click for better price!
or call +44 20 7424 1960
quote 776164
ADDAC System ADDAC204 VC CV Mapping Module (red faceplate)
Cat: 776178 Rel: 08 Sep 20
 
CV mapping module
Notes: With the VC mapping module you'll be able to scale your voltage and also control its offset via CV.

This module provides two outputs for normal and inverted output voltages. A third output morphs between the normal and inverted outputs.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies?
. Max current: 40mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $207.36
Click for better price!
or call +44 20 7424 1960
quote 776178
ADDAC System ADDAC206 Switching Sequencer Module (red faceplate)
Cat: 776180 Rel: 08 Sep 20
 
Switching sequencer module
Notes: This is a Quad Channel Switcher.

Among many other possibilities it allows to:

Turn any 4x4 step sequencer into a 16 step sequencer.
Scramble sequences with diferent clock division settings.
Route 1 audio or voltage signal to 4 diferent destinations.
Switch between 4 audio or voltage signals

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 3.5 cm

ELECTRICAL:
Max current: +80mA/-40mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.
Read more
MRP:$308.72
 1 in stock $308.27
Click for better price!
or call +44 20 7424 1960
quote 776180
ADDAC System ADDAC208 Comparator & Rectifiers Module (red faceplate)
Cat: 776183 Rel: 08 Sep 20
 
Comparator module
Notes: A Comparator is an electronic circuit that compares two voltages and switches its output to indicate which is larger. The Comparator operates between -10 or +10V

The Output is always -10V if below Threshold and +10V if above Threshold.

A Rectifier is an electronic circuit that is used to transform AC signals to an equivalent DC signal while removing one of it's polarities, i.e. Positive rectification excludes negative signals and vice-versa.
Both sections can be used to change the shape of any waveform as well as its harmonic content.

FRONTPANEL:
1 Comparator Threshold Knob
1 Comparator Jack Output
2 Comparator Monitor Led1 Common Signal Jack Input
4 Rectificated Outputs

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $137.50
Click for better price!
or call +44 20 7424 1960
quote 776183
ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate)
Cat: 776247 Rel: 08 Sep 20
 
Bridge module
Notes: A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.

Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case. Less clatter, less spaghetti, faster connection! There's nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.The modules can be installed in normal position or a 180 degree position to fit any need and any case design.

Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels. With two 2 ADDAC213Bs connected to each ADDAC213A module, you'll have a total of 24 channels going between your cases with a simple one-cable bridge. Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable.

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$109.12
 2 in stock $108.68
Click for better price!
or call +44 20 7424 1960
quote 776247
ADDAC System ADDAC214 VC Rotator Module (red faceplate)
Cat: 776199 Rel: 08 Sep 20
 
VC rotator module
Notes: This is the VC Rotator, a stepped routing module for any type of signal (audio, cv, gate, trigger...)

Similar to a VC switcher but in this case there's the same number of inputs than outputs so, instead of 4 to 1 or 1 to 4, this module is always 4 to 4 but it can be patched for 2 to 2 and 3 to 3 step actions.

All four inputs get routed to the four outputs depending on the CV and Clock controls and are divided into 4 routing steps:
1. routes all inputs to the same number output: 1:1, 2:2, 3:3, 4:4
2. routes all inputs to an offset of 1: 2:1, 3:2, 4:3, 1:4
3. routes all inputs to an offset of 2: 3:1, 4:2, 1:3, 2:4
4. routes all inputs to an offset of 3: 4:1, 1:2, 2:3, 3:4

Direction determines if the clock input goes forward or backwards.
Going forward it can be set to 2-3 or 4 steps using the Rotate knob offset, going backwards always sync to 4 steps even if offseted by the Rotate knob.
For 2 & 3 step action input 1 is normalled to input 3 and input 2 is normalled to input 4.

Reset resets the internal clock to the first step.

Pendulum, external sequencing or any complex CV actions can be achieved using the CV input and dedicated attenuverter.

4 leds monitor which input is routed to output 1.
Read more
MRP:$183.64
 1 in stock $181.87
Click for better price!
or call +44 20 7424 1960
quote 776199
ADDAC System ADDAC221 10x9 Channel CV to CC MIDI System Module (red faceplate)
Cat: 776266 Rel: 08 Sep 20
 
Controller module
Notes: The ADDAC221 is a standard midi controller that allows CV inputs, converting CV variations to MIDI Control Change Messages. This allows interaction with your favourite standalone synthesisers and softwares through simple plug-and-play midi control.

A dedicated software permits the user to store up to 9 different presets, where the CC values of each channel can be configured as wished.

This way the user can preset his favourite synths to control filters, envelopes and whatnot from CC messages coming from the module CV inputs.

Ships with 2 stereo jack to din5 midi cables.
Read more
 1 in stock $368.15
Click for better price!
or call +44 20 7424 1960
quote 776266
ADDAC System ADDAC222 4x6 Voices 1V/Octave to MIDI Notes Module (red faceplate)
Cat: 776268 Rel: 08 Sep 20
 
MIDI notes module
Notes: Most recent from the ADDAC MIDI Series, the 222 converts 4 CV inputs to four distinct polyphonic MIDI NOTES streams, with up to 6 note voices per input. This allows the user to send midi notes to external midi devices straight from your modular: just plug it into your classic synth or your favourite virtual instruments. Combined with the ADDAC221 you can fully control any external midi device.

Ships with 2 stereo jack to din5 midi cables.
Read more
 1 in stock $413.62
Click for better price!
or call +44 20 7424 1960
quote 776268
ADDAC System ADDAC301B Dual Expression Pedal Attenuator Module (red faceplate)
Cat: 776289 Rel: 08 Sep 20
 
Dual epression pedal attentuator
Notes: Passive dual expression pedal attenuator.

Plug any CV or audio source through it and control its amplitude through any standard expression pedal.

Invert switch for inverting the expression pedal action.

Specs:
- Passive Module
- Width: 4 HP
- Depth: 3 cm
Read more
MRP:$74.52
 1 in stock $74.29
Click for better price!
or call +44 20 7424 1960
quote 776289
ADDAC System ADDAC301C Dual Sustain Pedal Switcher Module (red faceplate)
Cat: 776294 Rel: 08 Sep 20
 
Dual sustain pedal switcher
Notes: Passive dual sustain pedal switcher.

Plug any CV or audio source through it and control its state (on / off) through any standard sustain pedal.

Specs:
- Passive Module
- Width: 4 HP
- Depth: 3 cm
Read more
MRP:$69.20
 2 in stock $68.74
Click for better price!
or call +44 20 7424 1960
quote 776294
ADDAC System ADDAC302 Nchunk Control Module (red faceplate)
Cat: 776295 Rel: 08 Sep 20
 
Control module
Notes: The ADDAC302 Nchunk Control module allows you to connect a Nintendo Nunchuck controller to your modular synth, featuring a two-axis thumb joystick, a three-axis accelerometer and two trigger buttons.

The module provides CV outputs for all of the Nunchuck's parameters and special functions to remap the CV outputs. The remapping can be both continuous or step-by-step and can be accessed through either the dedicated CV inputs or the manual controls.

A specially dedicated Mix output averages between the first two CV outputs, a very useful feature for continuous control parameters.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 4 cm

Control Voltage I/O:
- CV inputs: 0 - 10v
- CV outputs: 0 - 5v
- Gate in threshold: 2.5v

Electrical:
- Compatible with +-12v and +-15v power supplies
. Max current: 100mA?
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $287.21
Click for better price!
or call +44 20 7424 1960
quote 776295
ADDAC System ADDAC304 Manual Gates Module (black faceplate)
Cat: 776300 Rel: 15 Sep 20
 
Manual gates module
Notes: With the ADDAC304 Manual Gates, you'll be getting 8 manual gates (0 +5v) in a nifty package - a perfect way to perform on and control your modular system.

The ADDAC304 comes with an interesting twist: 4 out of the 8 available gates can act as momentary switches, outputting the signals in their respective inputs when each gate's button is pressed.

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
Gate outputs: 0 +5v

ELECTRICAL:
Max current: 10mA
Read more
 1 in stock $106.46
Click for better price!
or call +44 20 7424 1960
quote 776300
ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate)
Cat: 776311 Rel: 08 Sep 20
 
Rhythm generator module
Notes: This module is a powerful rhythm generation machine- it features 4 voices of gate outputs (including inverted outputs for logic NOT sequences) where each voice can have independent lengths, all configurable with direct knobs anc cv inputs.

Perfect for precise polyrhythmic patterns and all sorts of non-linear sequencing.

The module works by 6 different rhythm generation "algorithms / principles":
Euclidean (equal distribution)
Golomb Rulers (inequal distribution)
Probabilistic (predictable distribution)
Game Of Life (organic progression)
Footwork'n (inducted error progression)
Pong (voltage controlled Pong game)

Plus a 4 channel Gate Sequencer Mode with up to 32 steps and 16 storable presets.

Add ADDAC402B Expansion for full I/O Midi control plus access to a powerful midi interface, with:
Midi Sync
5 cv to midi channels (notes and/or cc)
4 midi to gate channels
All panel controls (knobs, switches and push buttons) as cc controls.

All fully configurable with a midi learn feature for easier configuration.

MECHANICAL:
Format: Eurorack
Width: 20 HP
Depth: 5.5 cm

CONTROL VOLTAGE I/O:
CV inputs: 0 to +10v

ELECTRICAL:
Max current: 150mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $505.65
Click for better price!
or call +44 20 7424 1960
quote 776311
ADDAC System ADDAC402B Heuristic I/O Expansion Module (red faceplate)
Cat: 776312 Rel: 08 Sep 20
 
MIDI expansion module
Notes: ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi interface, with:

Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like play, stop and continue.

CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign on MIDI Channel 2.

MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls as any standard MIDI controller. The individual CC numbers can be configured through the Configuration Menu.

MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.

MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI CC controls. This allow full automation of the module via MIDI
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
Read more
MRP:$114.44
 1 in stock $110.89
Click for better price!
or call +44 20 7424 1960
quote 776312
ADDAC System ADDAC501 Complex Random Module (red faceplate)
Cat: 776328 Rel: 08 Sep 20
 
Random CV generator module
Notes: The ADDAC501 does random CV generation and outputs it through four independent channels. You can control the desired range of voltages and time frequency at which new values are generated.

It can also be triggered by an external CV source and the output voltages can be either free or quantized (if you prefer to have a standard C Major scale).

Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

Mechanical:
- Format: Eurorack
- Width: 8 HP
- Depth: 5 cm

Control Voltage I/O:
- CV inputs: 0 - 10v
- CV output: 0 - 5v (0 - 10v through jumper)
- Gate in threshold: 2.5v

Electrical:
- Compatible with +-12v and +-15v power supplies
- Max current: 150mA
- Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $344.86
Click for better price!
or call +44 20 7424 1960
quote 776328
ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate)
Cat: 776329 Rel: 08 Sep 20
 
Expansion module
Notes: The ADDAC501B expansion is connected directly to the ADDAC501 Complex Random. It extends functionality by adding gate outputs to the random generators.

If ADDAC501 generates a new random above the average between Minimum and Maximum, then the respective gate on ADDAC501B is triggered.

There are three pairs of gates, corresponding to the respective outputs on ADDAC501. Each gate pair has both positive and inverted outputs.

This expansion module also offers a dedicated knob for gliding effects. With it you can have a voltage ramp between two consecutive random numbers- randomized "legato" expressiveness.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 5 cm

Control Voltage I/O:
- Gate outputs: 0 - 5v

Electrical:
- Connects directly to ADDAC501
- Max current: 20mA
Read more
 1 in stock $137.50
Click for better price!
or call +44 20 7424 1960
quote 776329
ADDAC System ADDAC503 Marble Physics Module (red faceplate)
Cat: 776332 Rel: 08 Sep 20
 
Marble physics module
Notes: Newtonian physics on a modular synth! The ADDAC503 Marble Physics is a CV generator based on the mechanics behavior of a marble on a tray.

Through this realtime physics simulator you'll be able to control several parameters that will affect the behavior of a model of a spherical object against a plane. You can tilt the plane or bump the marble with a certain strength, which will cause it to roll and bounce on elastic walls.

The model will output the object's XY position or velocity and you can control other physical parameters, like the walls' elasticity or the strength of a bump. When the marble hits walls the bounce output triggers and you can additionally lock the X axis for a one dimension simulation. Finally you can also set the overall speed of the simulation.

By controlling all of these properties you be able simulate several scenarios where the marble falls, gets gently pulled by gravity, orbits indefinitely or bounces on walls like a pinball. Truly engaging physics simulations!

Mechanical:
. Format: Eurorack
. Width: 10 HP
. Depth: 5.2 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 5v

Electrical:
. Max current: 150mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $379.24
Click for better price!
or call +44 20 7424 1960
quote 776332
ADDAC System ADDAC504 Probabilistic Generator Module (black faceplate)
Cat: 776335 Rel: 15 Sep 20
 
Generator module
Notes: This is a complex Gate / CV generator based on probabilities.

Functions:

Knob 1:
%1 = Gate 1 Probability
5TG = Fifth Output Type: Trigger/Gate
N1 = Note 1 Tuning

Knob 2:
%2 = Gate 2 Probability
T.SIZE = Trigger Size
N2 = Note 2 Tuning

Knob 3:
%3 = Gate 3 Probability
DIR = LOCK Mode Direction: Backwards/pendulum/forward
N3 = Note 3 Tuning

Knob 4:
%4 = Gate 4 Probability
S.SIZE = LOCK Mode Sequence Size: up to 16 steps
N4 = Note 4 Tuning

Knob 5:
SWING X = Clock Swing X: 1 to 16
Y = Clock Swing Y: 1 to 16
N5 = Note 5 Tuning

Gate Outputs Behaviour:

At every clock input, based on the four knobs probability settings, the module will select one active gate out, only one of the five gates will be active at all times. All Gate outputs can also behave as a Trigger instead, Trigger size can also be adjusted.

The knobs set the probabilities of each gate to be chosen, here's an example of how this operates

With all first four knobs at 12 o'clock the first Gate has 50% of being the chosen one, the remaining 50% of the times will be passed through the next knobs. So Gate 2 at 12 o'clock has 50% of the remaining 50% left by setting one, which leaves it with 25% chance of being the chosen one, the remaining 25% will be passed through Knob 3 which will have 12.5% chance of being the chosen one, the remaining 12.5% will be sent to Setting 4 which will have a probability of 6.25%. The remaining percentage left by the 4 Settings will always be the probability of Gate 5, in this case the remaining 6.25%.

Here's a couple more examples.

All knobs at 12 0'clock
Setting 1 = 50% chance, 50% left for remaining settings.
Setting 2 = 25% chance, 25% left for remaining settings.
Setting 3 = 12.5% chance, 12.5% left for remaining setting.
Setting 4 = 6.25% chance, 6.25% left for Gate 5.

All knobs at 9 0'clock (aproximate values)
Setting 1 = 20% chance, 80% left for remaining settings.
Setting 2 = 16% chance, 64% left for remaining settings.
Setting 3 = 12.8% chance, 51.2% left for remaining setting.
Setting 4 = 10.24% chance, 40.96% left for Gate 5.

Tuning and CV outputs:

While in the Tuning page you can use all knobs to set the 5 pitches
When in tuning page knobs should be rotated one at a time!
While rotating the knobs the CV out 4 will be used as a monitor, the other 3 CV outs will be behaving normally.
The module detects which pot is being rotated and outputs the relative pitch CV on CV out 4 for all knobs.
While on this page the tuning will be quantized or not relative to the panel Quantize on/off switch. Even if this process is done in quantized mode the module always store the free value in order to allow quantisation to be turned off later.
Once you're happy with the tuning you can exit the page, new values are stores to memory while exiting the page.
When tuning the module detects both the note selected and the relative octave.

CV Outs behaviour
This will be easier to explain with examples

Let's say we tuned these notes:

C0 or 0v
D1 or 1.166v
F2 or 2.466v
G3 or 3.583v
A4 or 4.75v

1. Next Logic out calculated is gate 3.
CV outs 1-2-3 will output a note in octave 2, the note itself is randomised from the 5 tuned notes (C,D,F,G,A).
CV out 4 will output the exact note tuned with knob 3 (F2)

2. Next Logic out calculated is gate 5.
CV outs 1-2-3 will output a note in octave 4, the note itself is randomised from the 5 tuned notes (C,D,F,G,A).
CV out 4 will output the exact note tuned with knob 5 (A4)

Out 1-2-3 is octave related
Out 4 always output the original tuned note

Knobs Pages access:

MENU/TRIGGER button is used to access pages
After power up it gets to first page by default.

Page 1:
MENU/TRIGGER button is off and blinks with clock inputs

Page 2:
Pressing the MENU/TRIGGER button for 3 seconds the Button Led lights up meaning you're in Page 2, changing knobs will affect the secondary function.
Releasing the button jumps to Page 1

Page 3:
Pressing the MENU/TRIGGER button for 3 seconds the Button Led lights up, keeping it pressed without moving any knob for 3 more seconds makes the Button led go off. At this time you can release the button. After that the button will light up meaning you're in page 3, or the tuning page.
Pressing the button one time jumps to Page 1

Soft-Recall and Memory:

Knob positions are stored in memory while in operation to be able to have a soft recall of the settings, so when jumping from page to page you'll need to rotate the knob until you find the last setting and only then they start to operate. Whenever the pot crosses the last setting point the MENU/TRIGGER button will blink indicating that the knob is now active.

Page 2 & 3 have permanent memory so it will always load the last settings after power up.
Page one is volatile and powers up with the initial knobs settings.
Read more
 1 in stock $424.71
Click for better price!
or call +44 20 7424 1960
quote 776335
ADDAC System ADDAC601 VC Fixed Filterbank Module (black faceplate)
Cat: 776346 Rel: 15 Sep 20
 
Analog filterbank module
Notes: Eight independent fixed-frequency filter bands combine with linear VCAs to create massive sonic potential. VCAs also double as envelope followers, with a CV output per band.

Supplier's Notes:

The ADDAC601 Analog Filterbank will have you shaping the spectrum of your sound "tout de suite".

With its 8 fixed frequencies, this very special filterbank has two additional features that you won't find anywhere else. Each of the 8 band volumes can be controlled through a linear high performance VCA, which adds great dynamics and new abilities to the art of filtering. Additionally this module also doubles as an envelope follower, with a dedicated CV output per band.

It features numerous output options: you can select between individual bands, the full processed sound, a wet/dry signal and even choose between odd or even frequencies.

Plus you can add up to two different signals, which are mixed internally by the ADDAC601 inputs.

- Format: Eurorack
- Width: 20 HP
- Depth: 5.5 cm

Control Voltage I/O:
- CV inputs: i 5v
- CV outputs: 0 - 10v

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: +340mA/-350mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 2 in stock $424.71
Click for better price!
or call +44 20 7424 1960
quote 776346
ADDAC System ADDAC611 Gotharman's VC Tube Filter Module (black faceplate)
Cat: 776355 Rel: 08 Sep 20
 
Tube filter module
Notes: This module was developed upon the Tubaz Filter which was released in 2014 by Gotharman but is currently no longer in production. We loved the original module so much that we officially licensed it's circuit and expanded it to feature several new functionalities.

Here's a paragraph from Gotharman regarding the original design:
"I designed it with the purpose of adding crunch, edge and distortion to my eurorack system. It is not an ideal bandpass filter, that cuts off all frequencies above and below the center frequency.
Because of its high drive, there are, in most cases, some bleedthrough of the harmonics, that should have been cut off. You might consider calling it a "Band Add" filter. The main purpose of it, was to add edge, not to be a perfect bandpass filter."

While everything he mentions is still true we believe he was being modest, It's a dirty, gritty, growling and whining monster which promises you some of the most peculiar filter sounds you'll ever hear.
However do not classify it as a "weird" distortion unit just yet because besides this hairy character it can be easily tamed (using lower volume levels) and then, with some care and intention from the user, it will transforrm itself showing it's feline purrrrr and cuddle sweet and caring, or like any good mut, showing up at night all happy, wet and dirty from a full dog's day and will lay down at your feet while wiggling it's tail howling as yawning just happy to be back home.

As such, standard volume principles do not quite apply to these units, the Audio Levels will go up to x2 amplification, Drive will go up to x11 and master outs go up to x2. The combination of these will cover all diferent qualities it can present. Overall sound can be distorted pre-Tube (raising input levels), in Tube (raising drive) or post-Tube (raising Out levels).
Higher Inputs and Drive will always be gritty, lower Inputs and Drive volumes together with higher Output levels will make the overall behaviour more mellow and closer to what a typical filter would behave like.

No standard expectations should be considered when acquiring these units, all of the tubes were built in the 70's and were bought from various sources, we always kept the premise that no tube was a bad tube (unless not really workinng) so due to each specific characteristics no module will sound exactly the same, making each unit particularly unique. This uniqueness will be particularly evident on their resonance/self-oscilating timbre as well as in their own microphonic qualities.

Regarding power and current draw, the module is designed using a low power tube, so it won't starve your eurorack power supply.

Tech Specs:
12HP
3.5cm deep
90mA +12V
60mA -12V
Read more
MRP:$365.94
 1 in stock $352.64
Click for better price!
or call +44 20 7424 1960
quote 776355
ADDAC System ADDAC800X High-End Outputs Module (red faceplate)
Cat: 776392 Rel: 08 Sep 20
 
Outputs module
Notes: Inspired by the legacy designs of premium vintage gear, the ADDAC800X behaves like a high-quality DI box and is all about keeping the sound coming from your Modular free from any undesired noisy interferences, making sure that what you're getting from your outputs is what your Modular is actually producing. It provides galvanic electrical isolation between the Modular system and external sources preventing impedance mismatch and ground loop induced hum. ADDAC's 800X circuit is designed around a unity 1:1 type nickel core Hammond Audio Transformer from the 140UEX series (equivalent to Jensen audio transformers).

Operating in the 20 Hz to 20 KHz range and providing exceptional shielding from external sources, this impedance matching transformer provides the 800X with two fully balanced high-end outputs (via XLR connectors).

Applying a transformer balanced output isolation has lots of advantages over other less expensive ways for dealing with ground loop issues. This method provides the chance to set a very simple and clean circuit in which the signal transfer process develops smoothly and humming free. The transformer is a device that performs both signal balancing and high-to-low (or vice-versa) impedance conversion, while rejecting straggled DC voltage and Radio Frequency Interference from signal passing through a magnetic bridge. In a transformer, two (or more) coils (called windings) of insulated wire wound around a magnetic metal core allow for its input(s) and output(s) not to be physically connected together. When an AC signal passes through the input winding (the primary), a perfectly related AC signal appears on the output winding (the secondary). This way, by the fact that signal flows via inductive coupling between the two windings of the transformer, the ADDAC 800X presents a most accurate electrical isolation between its input and output. A same number of windings on each coil guarantees that there's no gain loss when audio signal passes from the primary to the secondary windings. Furthermore, since these two windings are insulated from each other, the transformer will electrically isolate the 800X from any other device, preventing hum problems coming from an outsider ground.

LEFT IN will output sound to both channels.
Through RIGHT IN, signal will only find its way on OUT 2 (if the LEFT/RIGHT toggle is lifted up, RIGHT IN will be ignored and LEFT IN will be present in both OUTs). With both INs connected you'll have two separate outputs (LEFT IN -> OUT 1 & RIGHT IN -> OUT2). However, lifting up the LEFT/RIGHT toggle you'll also find RIGHT IN ignored and LEFT IN will fed both OUTs.

Each TRANSFORMER ISOLATED OUTPUT section has its signal overload warning led and two dedicated toggle switches: one that works as a simple amplifier / attenuator pad to +6dB / -10dB respectively, and a LIFT/FLOAT/GND toggle. This last one is a 3-way selector that lets you choose between lift, ground or floating ground (toggle's middle position) to be taken as reference for the ground point. In the LIFT position the module circuit will be lifted to ground through a 100R resistor and a 10nF capacitor and pin 1 of the XLR connection will act as the ground point. Choosing GROUND will put ground to be shared between inputs and outputs. Floating ground will leave ins and outs grounds completely apart from each other. Any of these three positions may be the best form of avoiding ground loops or any other undesired interference occurring between your modular and the sound system you're plugging it into. Try out which one of this options will work the best in a given situation.

An HEADPHONES AMPLIFIER (with VOLUME knob) connection is available for quietly working with your modular or pre-listen your sounds before making them public matter in a live situation. This section features an OPA2134 High-Performance Audio Operational Amplifier. This device presents the ideal characteristics for use with an headphones set, like ultra-low distortion and low-noise fully specified for audio applications, in combination with high-output drive capability and excellent DC performance that altogether allow for high-dynamic headroom and really superior sound quality.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 6.7 cm

Electrical:
. Max current: 100mA? on each rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $459.08
Click for better price!
or call +44 20 7424 1960
quote 776392
ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate)
Notes: All you could ever dream of from an Eurorack console, and then some.

The ADDAC807A VC Stereo Summing Mixer offers you the power, the flexibility and the gorgeous layout of a high-end audio console, in the popular Eurorack format. Starting off at 5 stereo channels, with the option to add 4 additional stereo channels via the ADDAC807C Expansion Console, its send/return options and clever matrix will ensure you have that perfect mix down in seconds. Customary to ADDAC System designs, there is enough CV control and hands-on switch options to make the ADDAC807A into an instrument in and of itself.

The ADDAC807A is accompanied by its sibling, the ADDAC807B Inputs Console. We decided to allow the user to freely define the placement of the jacks by separating the area where all your cables are located. Less clutter means more hands-on control and higher playability. The ADDAC807B Inputs Console holds all the jack inputs for the ADDAC807A Main Console, along with CV inputs and additional channel settings cause you can never have enough switches.

MECHANICAL:
Format: Eurorack
ADDAC807A Width: 56 HP
ADDAC807B Width: 24 HP
Depth: 4.5 cm
Weight: 1.5 kg (3.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 650mA on each rail
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$1,602.16 SAVE 10%
 1 in stock $1,440.48
ADDAC System ADDAC807A+ Individual Channel Stereo Outputs Module (black faceplate)
Cat: 776667 Rel: 08 Sep 20
 
Stereo outputs module
Notes: Dedicated expansion for the ADDAC807 VC Summing Mixer

Features 5 individual track post fader stereo outputs.

6HP
2 cm deep
0mA
Read more
 1 in stock $92.03
Click for better price!
or call +44 20 7424 1960
quote 776667
ADDAC System ADDAC807C VC Stereo Mixer Expansion Module (black faceplate)
Cat: 776436 Rel: 08 Sep 20
 
Mixer expansion module
Notes: The ADDAC807 VC Stereo Summing Mixer can provide up to 9 stereo channels of supreme Eurorack audio.

The main modules ADDAC807A and ADDAC807B can be expanded via the ADDAC807C Expansion Console for 4 additional stereo channels.

MECHANICAL:
Format: Eurorack
Width: 38 HP
Depth: 4.5 cm
Weight: 0.6 kg (1.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 250mA on each rail
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $689.74
Click for better price!
or call +44 20 7424 1960
quote 776436
ADDAC System ADDAC807C+ Individual Channel Stereo Outputs Module (black faceplate)
Cat: 776670 Rel: 08 Sep 20
 
Summing mixer module
Notes: Dedicated expansion for the ADDAC807C VC Summing Mixer

Features 4 individual track post fader stereo outputs.

2Hp
2 cm deep
0mA
Read more
MRP:$69.20
 1 in stock $68.74
Click for better price!
or call +44 20 7424 1960
quote 776670
ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate)
Cat: 776437 Rel: 08 Sep 20
 
Pre-amp module
Notes: The Phono Pre Amplifier module- connect your turntable to it and bring it's sound straight into any of your patches.

Specs:
- Width: 4 HP
- Depth: 4.5 cm
- Current: 40mA
Read more
 1 in stock $137.50
Click for better price!
or call +44 20 7424 1960
quote 776437
AION Modular 904A Voltage Controlled Low Pass Filter Module
Cat: 780153 Rel: 08 Jul 20
 
Voltage controlled low pass filter module
Notes: The AION Modular 904A Low Pass filter is an Eurorack clone of the classic Moog Modular Low Pass filter (should not be confused with the Mini Moog Low Pass filter).

The 904A Low Pass filter attenuates frequencies above the Fixed Control Voltage (cutoff frequency) point at a rate of 24dB per octave. The cutoff frequency is voltage controlled through the three control inputs at the bottom of the module (1v per octave).

The Regeneration knob (resonance) varies the amount of internal feedback, creating a resonant peak at the cutoff frequency.
The Fixed Controlled Voltage knob adjustes frequency over 12 octaves span (1v per octave).

The Frequency Range switch:
(sets the frequency band in two-octave steps)
1- 1Hz to 5kHz
2- 4Hz to 20kHz
3- 16Hz to 80kHz

Specifications:
Power: +12 40mA, -12 25mA
Depth: 40mm
Doepfer compatible

40 mA +12V
25 mA -12V
0 mA 5V
Read more
MRP:$336.67 SAVE 20%
 1 in stock $270.57
Click for better price!
or call +44 20 7424 1960
quote 780153
AION Modular 904B Voltage Controlled High Pass Filter Module
Cat: 780159 Rel: 18 Nov 20
 
filter module
Notes: Premium sound quality from this premium module, based on the classic Moog high-pass filter. Steep 24dB/oct filter curve with precise CV-controlled cutoff frequency tracking over a 12-octave span.

Supplier's Notes:
The AION Modular 904B High Pass filter is an Eurorack clone of the classic Moog Modular High Pass filter.
The 904B High Pass Filter attenuates frequencies below the Fixed Control Voltage(cutoff frequency) point at a rate of 24dB per octave.

The cutoff frequency is voltage controlled through the three control inputs at the bottom of the module (1v per octave).

The Fixed Controlled Voltage knob adjustes frequency over 12 octaves span (1v per octave).

The Frequency Range switch:
LOW- 4Hz to 20kHz
HIGH- 10Hz to 50kHz

Specifications:
Power: +12 60mA, -12 50mA
Depth: 40mm
Doepfer compatible.

60 mA +12V
50 mA -12V
0 mA 5V
Read more
MRP:$336.67 SAVE 20%
 1 in stock $270.57
Click for better price!
or call +44 20 7424 1960
quote 780159
AION Modular 904C Filter Coupler Module
Cat: 780136 Rel: 07 Jul 20
 
Filter coupler module
Notes: The AION Modular 904C Filter Coupler is an Eurorack clone of the classic Moog Modular 904C.

The 904C Filter Coupler connects the 904A Lowpass and the 904B Highpass together to produce a Bandpass or a Band Reject filter response.

Bandwidth can be extended to three octaves and Center Frequency ranges from 5Hz to 20KHz. Both can be controlled manually or via control voltage.

The 904C provides a wide variety of signal processing and we strongly encourage experimentation but we advise to start with the following settings:

904A Fixed Control Voltage +6
904A Frequency Range 2
904B Fixed Control Voltage -1
904B Frequency Range LOW

The 904A and the 904B are required to use the 904C.
In the "OFF" position, the 904A and 904B are disconnected from the 904C an can be used independently.

The connection cables are provided with the module.

30 mA +12V
15 mA -12V
0 mA 5V


Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible.
Read more
MRP:$335.34 SAVE 19%
 1 in stock $270.57
Click for better price!
or call +44 20 7424 1960
quote 780136
AION Modular 905 Reverberation Unit Module
Cat: 780111 Rel: 07 Jul 20
 
Reverberation module
Notes: When a dynamically varying signal is applied to the input of the 905, the output will consist of a series of closely spaced echoes, the subjective effect of which is similar to that of reverberation of sound. If a small amount of "echo signal" is mixed with a larger amount of "direct signal" (Reverberation Control set slightly clockwise), the effect of a typical concert hall is obtained. If the echo signal only is passed (Reverberation Control is set fully clockwise), an exaggerated echo suggesting a cave is obtained. The relative amount of echo signal and direct signal can be continuously changed from 100% direct signal to 100% echo signal.

Specifications:
Power: +12 (25mA), -12 (25mA)
Depth: 40 mm
Doepfer compatible
Read more
MRP:$335.34 SAVE 30%
 2 in stock $236.19
Click for better price!
or call +44 20 7424 1960
quote 780111
AION Modular 907A Fixed Filter Bank Module
Cat: 780134 Rel: 08 Jul 20
 
Filter bank module
Notes: The 907A Fixed Filter Bank is a non-voltage controlled modifier which emphasizes or reduces the gain of the center frequency bands indicated on each of the eight center pots, in addition to the cut-off points from low pass and high pass filters at either frequency extreme. A total of 10 overlapping filter networks are included.

Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible.
Read more
MRP:$489.70 SAVE 25%
 1 in stock $364.84
AION Modular 911 Envelope Generator Module
Cat: 780140 Rel: 07 Jul 20
 
Envelope generator module
Notes: The AION MODULAR 911 Envelope Generator is an Eurorack clone of the classic Moog™ Modular 911.

The 911 Envelope Generator (ADSR) generates the Control Voltage contours required for producing envelopes in conjunction with a voltage-controlled amplifier or a voltage-controlled Filter.

Attack time (T1), Decay time (T2), and Release time (T3) are all independently variable over a 2 millisecond - 10 second range, making the module suitable for very fast percussive sounds or long and evolving sounds.

The 911 Envelope Generator can be triggered by an external gate signal via the Trigger Input or manually by a push button.

Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible
Read more
MRP:$251.50 SAVE 19%
 1 in stock $202.92
Click for better price!
or call +44 20 7424 1960
quote 780140
AION Modular 912 Envelope Follower Module
Cat: 780115 Rel: 08 Jul 20
 
Envelope follower module
Notes: The Envelope Follower produces two functions which can be used separately or in conjunction. The follower circuit Signal Input presents a control voltage output (DC) proportional to the average amplitude of the AC input signal. The second function, a Schmitt trigger, generates a V-trigger above a threshold voltage (comparator), when a slowly varying or DC voltage is introduced at the control input jack. The normalling of the control input of the follower circuit to the control input of the Schmitt trigger circuit allows both control voltage and trigger to be generated from a single variable source.

Specifications:
Power: +12 (40mA), -12 (8mA)
Depth: 40mm
Doepfer compatible
Read more
MRP:$272.79 SAVE 20%
 1 in stock $219.55
Click for better price!
or call +44 20 7424 1960
quote 780115
AION Modular 921 Voltage Controlled Oscillator Module
Cat: 780149 Rel: 07 Jul 20
 
Voltage controlled oscillator module
Notes: The AION 921 VCO is a variable waveform generator which produces frequencies ranging from sub-audio (LFO) to 40.000 hz. Four waveforms are available: sine, triangular, sawtooth and rectangular (with variable duty cycle A.K.A. pulse width modulation).
Both fixed and variable levels can be obtained from the front panel output jacks. Nominal frequency and range controls (octave) are found at the top of the module.

Voltage controlled rectangular width (VC-PWM) is set by the knob in the upper center (left) with the accompanying voltage input jacks.
Multiple frequency control inputs 1 and 2 can be plugged into this module in parallel. Control input 3 is used via the pot for linear frequency response (Liniar FM). All waveform outputs can be used if desired.

This is what we consider an improved version of the Moog 921 VCO, not a direct clone. Improvements were made concerning tuning and stability issues.

Frequency range:
0.01 hz - 40.000 hz

Range switch:
sub audio - 0.01 - 400 hz
audio - 1 - 40.000 hz

Scale switch:
2 or 12 octave frequency span.

Auxiliary outputs:
2 jacks (one normal, one inverted) with selected waveforms (sine, triangle, sawtooth, inverted sawtooth rectangular and inverted rectangular).
Waveforms amplitude controllable from 0 to maximum.

Hard and Soft synchronisation selectable via a switch.
Synch must be "OFF" (center position) when synchronisation is not beeing used, otherwise it will sound out of tuning.

Specifications:
Depth: 40mm
Doepfer compatible.

30 mA +12V
30 mA -12V
0 mA 5V
Read more
MRP:$489.70 SAVE 25%
 1 in stock $364.84
150/342(ページ1/7)の商品
1  2  3  4  5  6  7  »

Filter

Synth modules
DJ機器
Release Date
Close