Synth Module Accessories

Notes: This pack of 6 guitar audio patch leads from Chord is designed for connecting effects processors, sound modules, pedals etc. in coloured insulation. They are terminated at each end with a right angled 6.3mm jack plug.

Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter

Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter

Notes: Large sized spring reverb tank, Accutronics 9BB2C1B with 3×2 springs and medium decay (1.75 - 3 seconds).

Notes: TPS80W Triple Power Supply - TYPE A

The TPS80W is a high power, super efficient and low noise studio grade power system for your Eurorack Modular. We carefully designed this power supply to perform optimally with even the most demanding, noisy and power hungry modules in your rig.

Notes: The microZEUS is a 4HP power supply module for Eurorack format synthesizers. It is the smallest and most powerful power supply available for its size.

uZEUS with flying bus boards: this version features two ribbon bus boards. All you have to do is plug in your modules and play.

The uZEUS mixes linear and switching power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V and uses a standard +15VDC non-regulated wall adapter for power.

Notes: TipTop's Flying Bus Board is a cable version of a distribution PCB (printed circuit board) and extends the reach of one of your uZeus cables or adds a third row.

Notes: ***POWER SET FOR EU AND AUSTRALIA 220-230V:
The Pittsburgh Modular Structure 208 and Structure 360 eurorack enclosures use a switching power supply that needs manually set to the correct AC input voltage. The internal switch has already be properly set for 220-230 VAC. This setting works for the EU and Australia or other countries that use 220-230 VAC power.
For use in countries that use 100-120 VAC power, such as North America and Japan, the switch inside the case on the AC/DC regulator needs to be switched to the left. The switch is marked with a Yellow sticker printed with "AC input voltage can be selected by switch. Check input voltage avoiding damage before power on." The switch is located on the side of the enclosure below the arrow.
Please contact Pittsburgh Modular with any questions. service@pittsburghmodular.com***

Structure EP-360 Eurorack Enclosure

Maximum Power for a New Generation -

Beautifully stained hardwood triple row, 360hp powered eurorack travel case with lid. A huge case to house a monster synth. Features include a professional, heavy duty, internal power supply designed to exceed the needs of the most demanding analog and digital eurorack systems.




Everything is New:
With years of research and two case lines under our belt, we decided to start over and produce a line of cases for the next generation of eurorack synthesizers. The eurorack modular ecosystem is expanding faster than ever and manufacturers are constantly pushing eurorack cases and power supplies to the limits. What started as a power supply designed to drive primarily analog synthesizers has transformed into a supply that needs to simultaneously meet the unique demands of sensitive analog circuitry, power hungry digital processors, and ground sensitive user interface modules.

We started with what matters most. Clean power. A lot of it. Up to 3x the amount of clean power available in cases from other brands. Next we turned our focus to the enclosure itself and there was only one goal. Make the case stronger. Our engineers tested countless combinations utilizing different types of wood, joints, adhesives, assembly techniques, and hardware to ensure that Structure cases are as durable as they are beautiful.

With a clean and gorgeous design that promotes creative exploration, the Structure enclosures are our most robust and refined case line yet. With massive amounts of both room and clean power, you can reach completely new heights in your creative performances.






Includes:
Structure EP-360

Power
:
6 Amps of Clean +12v Power

6 Amps of Clean -12v Power

5 Amps of Clean +5v Power

Custom Powered Bus Board with 15 Keyed Eurorack Power Headers Per Row, 45 Power Headers Total

External On-off Rocker Power Switch with LED

Universal IEC Power Connector Works Anywhere

Structure EP-360 Enclosure
:
Hardwood and Steel Construction (No cheap plastic here)

Triple 120hp Rows

Removable Lid

Lid Fits Over Fully Patched System (No need to remove patch cables)

Edge to Edge Rail Design Reduces Gaps Between Modules and the Side of the Case

24 Smooth Sliding Square Nuts Per Rail (Holds up to 72 modules)

Beautifully Hand-Stained Hardwood

Matching Black Steel Hardware Set




Structure EP-360 Dimensions
:
External Depth with lid:9 1/4"
External Depth without Lid: 5 1/2"
External Height: 17"
External Width: 25 1/2"
Internal Depth Above Power Supply: 2 3/4"
Internal Depth Above Bus Board: 3 3/4"
Internal Depth Above Nothing: 4 1/4"

Notes: These cables are designed to interconnect pro audio gear with unbalanced mini phone jacks. They are ideal for use with modular synthesizers and sound modules.

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: 3.5 mm TS to Same
Conductor: 26 AWG OFC
Shield: 85% OFC Spiral
Quantity: 8 pc

Notes: These cables are designed to interconnect pro audio gear with balanced phone jacks. They are ideal for use with balanced phone patch bays. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: 1/4 in TRS to Same
Conductors: 26 AWG x 2 OFC
Shield: 85% OFC Spiral
Quantity: 8 pc

Notes: TipTop's Flying Bus Board is a cable version of a distribution PCB (printed circuit board) and extends the reach of one of your uZeus cables or adds a third row.

Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.

As of December 2020, all AE modules will be shipped with these knobs as standard.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Notes: This is a variant of the standard red / black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: Flying Bus Board for up to eight Eurorack modules.

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 101,6 centimeters.

Patch cable with banana plugs.

Length: 101,6 centimeters

Color: Violet

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 12.7 centimeters.

Patch cable with banana plugs.

Length: 12.7 centimeters

Color: Violet

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 25,4 centimeters.

Patch cable with banana plugs.

Length: 25,4 centimeters

Color: Orange

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 50,8 centimeters.

Patch cable with banana plugs.

Length: 50,8 centimeters

Color: Green

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 76,2 centimeters.

Patch cable with banana plugs.

Length: 76,2 centimeters

Color: Blue

Notes: Banana Shorting Bar for synthesizers and modular systems made by Buchla.

Shorting Bar with banana plugs. The color may vary.

Notes: Meng Qi's Char is a unique passive signal multiple, allowing three-way stereo signal multing.

It features a keychain attachment for easy carrying.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Mono 3.5mm mini jack to mono 6.35mm (1/4") jack cable.

Useful for connecting eurorack modules (i.e S.B.G.) to external music equipment.

Custom ALM barrel moulding matching ALM's patch cables.

2m length.

Notes: Rigid, 2mm aluminium powder coated and 300mm wide studio cable holder can host over 80 studio cables in perfect order! Two screws for fixing the cable holder are included.

Notes: Rack ears to install your SYNTRX in a studio deck.

Replace wooden side panels with rack ears and integrate the SYNTRX in your studio rack.

Notes: Branded Analogue Solutions LED Jack Pins.

These will light red / green as the signal swings from a positive to negative voltage.

Use the for diagnostics - or, just because they look cool (especially in the dark!)

The plugs are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.

Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.

These don't just look pretty - they have practical advantages too!

Help seeing what's going on in the dark!

Help diagnose signal flow.

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 84HP

Provides up to 2 Amp power total on each -12V & +12V rails (1 Amp total per row)
Connections for up to 32 modules.
Includes 5 Amp power 'brick'

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules on busboard, with additional 'flying bus board' included that adds up to 12 connectors.
Includes 2 Amp power 'brick'

Notes: Dust cover for the ALM 52HP 6U Synth Module Case.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.