安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth module accessories

ホーム  Equipment  

Synth module accessories

Options
137/37(ページ1/1)の商品
Subscribe to our weekly Studio Equipment emails
4ms Pod 34X Powered Eurorack Enclosure Case
Cat: 769782 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod34X is 34HP wide and has extra room to fit even the deepest modules (2.16" / 55mm of available module depth). The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

This Pod requires a power brick (not included).

Or, if you already have a Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain power supplies.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

34 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:
34HP Pod, black anodized aluminum
Extra deep (2.16"/55mm) fits virtually every Eurorack module
Built-in power supply with four Eurorack power headers
M3 x 8mm pan-head screws, stainless steel (10)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:
Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.65A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 177.3mm (6.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 34HP
Weight:
0.3 kg = 10 oz
Read more
MRP:$163.64 SAVE 17%
 1 in stock $136.37
Click for better price!
or call +44 20 7424 1960
quote 769782
4ms Pod 34X Unpowered Eurorack Enclosure Case
Cat: 769784 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod34X is 34HP wide and has extra room to fit even the deepest modules (2.16" / 55mm of available module depth). No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

34 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Exterior dimensions:
Width: 177.3mm (6.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 34HP
Weight:
0.3 kg = 10 oz
Read more
MRP:$85.15 SAVE 17%
 1 in stock $70.95
Click for better price!
or call +44 20 7424 1960
quote 769784
4ms Pod 64X Powered Eurorack Module Enclosure Case
Cat: 769789 Rel: 20 Mar 20
 
Eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:

64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:

Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz
Read more
MRP:$236.81 SAVE 17%
 3 in stock $196.23
Click for better price!
or call +44 20 7424 1960
quote 769789
4ms Pod 64X Unpowered Eurorack Enclosure Case
Cat: 769793 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X Unpowered is 64HP with 2.16" (55mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Includes:

64HP Pod, black anodized aluminum
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Unpowered: requires you to provide your own Eurorack power system
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.42 kg = 14.9 oz
Read more
MRP:$109.09 SAVE 17%
 1 in stock $90.91
Click for better price!
or call +44 20 7424 1960
quote 769793
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (120cm, black, pack of 2)
Cat: 801574 Rel: 20 Nov 20
 
Pair of black 120cm 3.5mm patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
 4 in stock $7.76
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (120cm, green, pack of 2)
Cat: 801570 Rel: 20 Nov 20
 
Pack of 3.5mm green patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
 3 in stock $7.76
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (120cm, purple, pack of 2)
Cat: 801573 Rel: 20 Nov 20
 
Pack of 3.5mm purple patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
 3 in stock $6.93
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (120cm, red, pack of 2)
Cat: 758070 Rel: 09 Dec 19
 
3.5mm patch cables for Eurorack modular synths
Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.

- 120cm (Pack of 2 + ALM branded tie)
- Colour: Red
Read more
 5 in stock $6.93
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (120cm, yellow, pack of 2)
Cat: 801568 Rel: 20 Nov 20
 
Pack of 2 3.5mm yellow patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Read more
! low stock $6.93
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (30cm, black, pack of 5)
Cat: 801514 Rel: 20 Nov 20
 
Pack of 3.5mm black patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
 5 in stock $8.59
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (30cm, green, pack of 5)
Cat: 801503 Rel: 20 Nov 20
 
Pack of 3.5mm green patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
 4 in stock $8.59
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (30cm, red, pack of 5)
Cat: 801498 Rel: 20 Nov 20
 
Pack of 5 3.5mm patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
 1 in stock $8.59
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (30cm, white, pack of 5)
Cat: 758066 Rel: 09 Dec 19
 
3.5mm patch cables for Eurorack modular synths
Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.

- 30cm (Pack of 5)
- Colour: White
Read more
 5 in stock $8.59
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (60cm, black, pack of 5)
Cat: 801531 Rel: 20 Nov 20
 
Pack of 60cm black 3.5mm patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
! low stock $9.98
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (60cm, purple, pack of 5)
Cat: 758067 Rel: 09 Dec 19
 
3.5mm patch cables for Eurorack modular synths
Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.

- 60cm (Pack of 5 + ALM branded tie)
- Colour: Purple
Read more
 2 in stock $9.15
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (90cm, white, pack of 3)
Cat: 758069 Rel: 09 Dec 19
 
3.5mm patch cables for Eurorack modular synths
Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.

- 90cm (Pack of 3 + ALM branded tie)
- Colour: White
Read more
 5 in stock $7.49
ALM DIN Sync To TRS Adapter Cable
Cat: 757949 Rel: 09 Dec 19
 
Din-sync adapter cable
Notes: ALM Busy Circuits' Din-Sync Adapter cable lets users route "clock" and "run" Din-Sync signals via two 3.5mm mono jacks. It's a great way to sync one's Eurorack modular sequencer with external drum machines, synthesizers, and more.
Read more
 2 in stock $7.76
ALM MIDI DIN To TRS Adapter Cable
Cat: 757951 Rel: 09 Dec 19
 
MIDI-TRS adapter
Notes: Break out MIDI signals into a 3.5mm stereo jack.

- Tip = Pin 4 (Source)
- Ring = Pin 5 (Sink)
- Sleeve = Pin 2 (Shield)
Read more
 More than 10 in stock $4.43
Befaco DIN5 MIDI To TRS Mini-Jack Type A Cable (1.5m, pack of 3)
Cat: 784176 Rel: 09 Nov 20
 
DIN5 to TRS cable
Notes: 3,5mm TRS to male DIN 5

150cm length
Read more
MRP:$15.96 SAVE 31%
 5 in stock $11.08
Behringer 3 Tier Eurorack Module Stand Case
Cat: 780468 Rel: 20 Oct 20
 
module stand case
Notes: Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
 More than 10 in stock $70.95
Click for better price!
or call +44 20 7424 1960
quote 780468
Behringer 3 Tier Eurorack Module Stand Case (B-STOCK)
Cat: 799732 Rel: 20 Oct 20
 
B-STOCK: Box dented, product unused & in perfect condition
Notes: ***B-STOCK: Box dented, product unused & in perfect condition***


Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
 5 in stock $68.45
Doepfer A-100 Synth Module Coloured Rotary Knob (blue, single)
Cat: 757357 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - blue
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Blue finish.
Read more
 2 in stock $1.86
Doepfer A-100 Synth Module Coloured Rotary Knob (green, single)
Cat: 757356 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - green
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Green finish.
Read more
 5 in stock $2.21
Doepfer A-100 Synth Module Coloured Rotary Knob (orange, single)
Cat: 757354 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - orange
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Orange finish.
Read more
 1 in stock $2.21
Doepfer A-100 Synth Module Coloured Rotary Knob (red, single)
Cat: 757353 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - red
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Red finish.
Read more
 1 in stock $2.21
Doepfer A-100 Synth Module Coloured Rotary Knob (white, single)
Cat: 757351 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - white
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. White finish.
Read more
 4 in stock $2.21
Doepfer A-100 Synth Module Vintage Rotary Knob (single)
Cat: 757360 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - vintage design
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Retro style finish.
Read more
 2 in stock $3.91
Doepfer A-100BUSV6 Bus Board With 22 Boxed Pin Headers & 4 Connection Cables
Notes: Bus board to connect 14 modules

An assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for connection to +/-12V power supply (4 wires with flat connectors on both ends, length about 30cm), but no mechanical parts (e.g. screws, spacers, nuts, washers).

In the new version of the A-100 bus board (labeled Version 6 / 2019) boxed pin headers are used which are equipped with a reverse protection (gap for the "nose" of the socket of the bus cable). When the bus cable coming from the module is connected to the boxed header in question the "nose" has to point to the right. The polarity of the cable is correct if the red wire of the bus cable then points to the bottom (to the continuous line labeled"RED WIRE" on the pc board). If this is not the case please do not connect the module to the bus board ! Otherwise both the module and the power supply (A-100PSU3) may be damaged ! In that case please contact the manufacturer of the module and ask for a suitable bus cable with the correct polarity of the connector.

The bus cables of original A-100 modules manufactured by Doepfer are equipped with suitable bus cables since 2012. Only for older A-100 modules manufactured before 2012 it may happen that the polarity of the 16 pin female connector of the bus cable is wrong (nose points to the left when red wire points to the bottom). This is because in the past unboxed pin headers were used and the position of the "nose" did not matter. In such a case please contact Doepfer or one of their dealers and order a suitable bus cable.
Read more
MRP:$49.22 SAVE 15%
 5 in stock $41.87
Click for better price!
or call +44 20 7424 1960
quote 763100
Erica Synths Eurorack Cable Holder (200mm)
Cat: 758855 Rel: 05 Dec 19
 
Eurorack cable holder
Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.

Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
Read more
MRP:$26.61
 4 in stock $24.67
NANO Modules 2hp Blank Empty Panel
Cat: 797079 Rel: 20 Nov 20
 
2HP blank empty panel
Notes: Blank Panels help to keep your Rack clean and well organised.

These panels not only fill in empty spaces in your rack, but also protect the power distribution boards by keeping things from falling into your rack. You can also use them to gain more space between modules or to separate module groups visually.

Inspired by Lissajous Curves & Oscilloscope aesthetics.

Lissajous Curves are the shapes created when the x-coordinate of a curve is described by one sine wave, and the y-coordinate is described by another sine wave.

By adjusting the frequency (a,b) of each wave and other parameters, interesting patterns emerge. Using oscilloscopes and two signal generators it is possible to create them.
Read more
MRP:$5.32 SAVE 26%
 1 in stock $3.94
NANO Modules 4hp Blank Empty Panel
Cat: 797085 Rel: 20 Nov 20
 
4HP blank empty panel
Notes: Blank Panels help to keep your Rack clean and well organised.

These panels not only fill in empty spaces in your rack, but also protect the power distribution boards by keeping things from falling into your rack. You can also use them to gain more space between modules or to separate module groups visually.

Inspired by Lissajous Curves & Oscilloscope aesthetics.

Lissajous Curves are the shapes created when the x-coordinate of a curve is described by one sine wave, and the y-coordinate is described by another sine wave.

By adjusting the frequency (a,b) of each wave and other parameters, interesting patterns emerge. Using oscilloscopes and two signal generators it is possible to create them.





Read more
MRP:$7.98 SAVE 27%
 1 in stock $5.83
NANO Modules 8hp Blank Empty Panel
Cat: 797090 Rel: 20 Nov 20
 
8HP blank empty panel
Notes: Blank Panels help to keep your Rack clean and well organised.

These panels not only fill in empty spaces in your rack, but also protect the power distribution boards by keeping things from falling into your rack. You can also use them to gain more space between modules or to separate module groups visually.

Inspired by Lissajous Curves & Oscilloscope aesthetics.

Lissajous Curves are the shapes created when the x-coordinate of a curve is described by one sine wave, and the y-coordinate is described by another sine wave.

By adjusting the frequency (a,b) of each wave and other parameters, interesting patterns emerge. Using oscilloscopes and two signal generators it is possible to create them.

Read more
MRP:$10.64 SAVE 38%
 1 in stock $6.64
Sound Machines FMJ3 3U 84HP Eurorack Module Desktop Case
Cat: 777365 Rel: 30 Jun 20
 
synth module case
Notes: The first product of the new case line from Soundmachines.

Sturdy steel to house and protect your modules.

2x850mA power rails.

VESA mount to construct your flying desktop systems.

The Soundmachines 'FMJ3' is a 3U 84 HP Powered Desktop Case introducing the brand new case line. The case features a sturdy steel housing to protect power supplies and modules as well as modular mounting options to build 6U and 9U expanded setups (to be announced). The FMJ3 case also employs 2x850mA power rails and VESA 100mm mounting holes to construct flying desktop systems!

Read more
MRP:$278.05 SAVE 21%
 1 in stock $220.62
Click for better price!
or call +44 20 7424 1960
quote 777365
Sound Machines FMJ3XL 3U 104 HP Powered Eurorack Module Desktop Case
Cat: 777368 Rel: 30 Jun 20
 
powered desktop case
Notes: The Soundmachines 'FMJ3 XL' is a 3U 104 HP Powered Desktop Case introducing the brand new case line. The case features a sturdy steel housing to protect power supplies and modules as well as modular mounting options to build 6U and 9U expanded setups (to be announced). The FMJ3 XL case also employs 2x850mA power rails and VESA 100mm mounting holes to construct flying desktop systems.
Read more
MRP:$347.23 SAVE 24%
 1 in stock $264.98
Tiptop Audio ZVERBZ The Spatial Card Bundle For Z-DSP Module (bundle of 70's, 80's & 90's card)
Notes: ZVERBZ is a collection of new stereo reverb algorithms for the Z-DSP. They range from typical reverbs to more complex effects that combine delay and pitch shifting with reverb. The effects are grouped by decades based on either the era an algorithm was introduced or the time when the effect was most popular. This variety of reverbs covers small to epic size spaces with the addition of shimmering, feedback tunneled pitch shifting, tape delay drivers, gated reverbs and a lot more. Analog clocking of the DSP chip and CV over the parameters enables even more experimentation. This is a collection inspired by the best from the past right at your fingertips.

Please note: The Z-DSP module is not included with this purchase- it is for demonstration purposes only.

Read more
MRP:$91.80 SAVE 11%
 2 in stock $82.03
Click for better price!
or call +44 20 7424 1960
quote 794121
Verbos Electronics Black Box 42HP Flat Skiff Case
Cat: 760204 Rel: 17 Jan 20
 
skiff case for Verbos Mini Horse module
Notes: The Black Box (AKA Ponyhof) is a 42HP skiff case designed as an enclosure for the Verbos Mini Horse module.

The enclosure is made of 1.5mm Powder Coated Steel. It includes an internal Verbos power supply and an external power supply.
Read more
MRP:$215.52 SAVE 22%
 1 in stock $168.52
Verbos Electronics Blank Panel Set (comprising of 4 panels - 1HP, 2HP, 2HP with logo & 4HP)
Cat: 760209 Rel: 15 Jan 20
 
blank panel set comprising of 4 panels
Notes: A set of blank panels to be used in dedicated Verbos systems. Packaged only as a full set.

The set comprises 1HP, 2HP, 2HP with Logo, 4HP.
Read more
 2 in stock $21.90
137/37(ページ1/1)の商品

Filter

Synth module accessories
DJ機器
Release Date
Featured
Close