安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth module accessories

View:
Options
141/41(ページ1/1)の商品
Cat: 725500 Rel: 15 Apr 19
 
Official 10HP 4ms blank panel
Notes: Make Noise blank panel - 10HP width. Black coloured PCB material with Make Noise logo.
Read more
 2 in stock $8.38
Cat: 725495 Rel: 15 Apr 19
 
Official 1HP 4ms blank panel
Notes: Make Noise blank panel - 1HP width. Black coloured PCB material with Make Noise logo.
Read more
 3 in stock $4.46
Cat: 725496 Rel: 15 Apr 19
 
Official 2HP 4ms blank panel
Notes: Make Noise blank panel - 2HP width. Black coloured PCB material with Make Noise logo.
Read more
 7 in stock $4.46
Cat: 725492 Rel: 15 Apr 19
 
Jumper cable for daisy chaining 4ms Listen modules and/or 4ms WAV recorder
Notes: The Audio Jumper 3-pin cable can be used to connect two Listen 4, Listen 4 Quarters and/or Listen IO modules to form a larger mixer. It's also possible to connect a WAV recorder with a Listen module for direct recording.
Read more
 1 in stock $2.36
Cat: 725498 Rel: 15 Apr 19
 
Official 6HP 4ms blank panel
Notes: Make Noise blank panel - 6HP width. Black coloured PCB material with Make Noise logo.
Read more
 2 in stock $5.51
Cat: 725499 Rel: 15 Apr 19
 
Official 8HP 4ms blank panel
Notes: Make Noise blank panel - 8HP width. Black coloured PCB material with Make Noise logo.
Read more
 2 in stock $7.61
Cat: 720434 Rel: 11 Feb 19
 
Bus stick, unshrouded
Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using un-shrouded headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.
Read more
 2 in stock $32.27
Cat: 720435 Rel: 11 Feb 19
 
Bus stick, shrouded
Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.
Read more
 6 in stock $36.47
Cat: 720436 Rel: 11 Feb 19
 
Two 14" flying bus cables with a total of 14 male header pins
Notes: Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules. Can be daisy-chained if extra headers are needed.
Read more
 6 in stock $24.13
Cat: 725502 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X is 40HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod40 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 1 in stock $129.07
Cat: 725503 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 40HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 1 in stock $69.25
Click for better price!
quote 725503
Cat: 725517 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 7 in stock $147.96
Click for better price!
quote 725517
Cat: 725518 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 48HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $73.45
Click for better price!
quote 725518
Cat: 725489 Rel: 15 Apr 19
 
Right angle 2.1mm barrel plug
Notes: Right angle 2.1mm barrel plug (5.5mm outer diameter, positive tip). Short barrel to barrel cable for daisy-chaining Row Powers and/or Pods. Cable is 11" long (centre of tip to centre of tip), suitable for two Pods next to each other or in front/behind each other. Also compatible with Row Power modules.

Both ends of the cable have a right-angle plug.
Read more
 8 in stock $5.51
Cat: 727746 Rel: 08 Apr 19
 
Eurorack case with power supply
Notes: The EVZ1 6U 104 HP is a compact and lightweight case. It is made of metal and gets a noble vintage look thanks to beautiful wooden side parts. This 6U case is flat and offers two rows of 104 HP for the installation of modules.

The integrated 4 HP wide KAZU power solution with switching PSU and EVE1 bus board works extremely accurately and delivers very clean power. A total of up to 20 modules can be connected.

The KAZU PSU solution is of high quality and delivers a constant current without getting hot.

- Switching power supply, developed especially for modular systems
- Minimal voltage peaks and interferences
- Very little heating, even at high loads
- Overvoltage and short-circuit protection
- Primary voltage: 100 - 240 V
Read more
 1 in stock $399.82
Click for better price!
quote 727746
Cat: 727747 Rel: 03 May 19
 
Compact & lightweight metal case with wooden side panels
Notes: Made of metal, and with a noble vintage look thanks to beautiful wooden side parts, this 6U case is flat and offers two rows of 84 HP for the installation of modules. The integrated 4 HP wide KAZU power solution with switching PSU and EVE1 busboard works extremely accurately and delivers very clean power. A total of up to 20 modules can be connected. The KAZU PSU solution is of high quality and delivers a constant current without getting hot.
Read more
 1 in stock $336.85
Click for better price!
quote 727747
Cat: 716764 Rel: 31 Jan 19
 
Skiff-friendly power supply for Eurorack modules
Notes: Excalibus is an affordable, skiff friendly powerful power supply (1.2A per rail) and bus. It provides the best of all worlds, power, stability, small size and price. Specially designed for two rows systems with mid to high power consumption. DIY friendly and safe, as it works with any standard DC supply.

Measurements: 50mm x 400mm x 12mm
Read more
 1 in stock $121.72
Click for better price!
quote 716764
Cat: 731209 Rel: 29 May 19
 
Robust, blank front panel for use with modular racks & other applications - 2HP wide
Notes: Blank panel, 2HP (10mm), constructed from anodised aluminium, black.
Read more
 2 in stock $5.77
Cat: 731212 Rel: 29 May 19
 
Robust, blank front panel for use with modular racks & other applications - 42HP wide
Notes: Blank panel, 42HP (10mm), constructed from anodised aluminium, black.
Read more
 2 in stock $17.58
Cat: 731210 Rel: 29 May 19
 
Robust, blank front panel for use with modular racks & other applications - 4HP wide
Notes: Blank panel, 4HP (10mm), constructed from anodised aluminium, black.
Read more
 2 in stock $6.56
Cat: 731211 Rel: 29 May 19
 
Robust, blank front panel for use with modular racks & other applications - 8HP wide
Notes: Blank panel, 8HP (10mm), constructed from anodised aluminium, black.
Read more
 1 in stock $6.82
Cat: 714422 Rel: 31 Dec 18
 
10-16 pin power cable
Notes: Standard Eurorack power cable.

Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.

Length: 25CM (9.8")
Read more
 More than 10 in stock $1.04
Cat: 714419 Rel: 31 Dec 18
 
Pack of 50 cross head M2.5 eurorack screws
Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.
Read more
 2 in stock $3.14
Cat: 714415 Rel: 31 Dec 18
 
Single cross head M2.5 screw - 7mm long
Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.
Read more
$3.14 SAVE 10%
 7 in stock $2.82
Cat: 714409 Rel: 31 Dec 18
 
Pack of 50 cross head M3 eurorack screws
Notes: M3 is the original mounting screw as specified by Doepfer in the Eurorack specification. M3 screws are used in cases by Doepfer, TipTop, Intellijel and others.
Read more
 More than 10 in stock $3.14
Cat: 714405 Rel: 31 Dec 18
 
Single cross head M3 screw - 7mm long
 1 in stock $3.14
Cat: 714403 Rel: 31 Dec 18
 
Screwdriver with reversible phillips and flat head types
Notes: Screwdriver with reversible phillips and flat head types.

Fits both Eurorack screw sizes: M3 and M2.5.
Read more
 2 in stock $4.71
Cat: 725949 Rel: 15 Apr 19
 
3U 40HP compact skiff case including PSU
Notes: The Mini Case offers 40 HP for mounting modules. A power supply is built-in.

208 mm long x 45mm deep.

PLEASE NOTE: Comes with EU 2 pin plug only - UK adapter may be required.
Read more
 2 in stock $112.28
Click for better price!
quote 725949
Cat: 729411 Rel: 29 May 19
 
Flying bus cable for TRAX!
Notes: The Flying Bus power cable allows multiple TRAX modules connected to this cable to share MIDI data with one another and also receive the proper power from the system, without connecting MIDI signals to other modules in your system.

Use when connecting multiple TRAX together to share MIDI Data. Also provides necessary power to additional TRAX units.

7 x 16-pin Eurorack headers.
Read more
 2 in stock $12.58
Cat: 725948 Rel: 25 Mar 19
 
Ribbon controller for the Field Kit
Notes: This is an awesome addition to the Field Kit. Slide your finger over the Softpot and the voltage will increase and decrease. The Softpot has a hold function, so you can play it like a keyboard, outputting voltages that are very useful to control motors and casually search through the radio bands, or to control a hacked walkman!

The product consists of:

- Field Kit Linear Softpot Sensor
- 1 x Dupont 3 contact cable to connect the Sensors to the Field Kit
Read more
 5 in stock $26.50
Cat: 725945 Rel: 25 Mar 19
 
Sensor Pack A - features five useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.
Read more
 5 in stock $52.46
Click for better price!
quote 725945
Cat: 725946 Rel: 25 Mar 19
 
Sensor Pack B - features three useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack B consists of 3 sensors:

- Accelerometer
- Capacitive Touch
- Sequential Voltage Source
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Accelerometer:

This board measures acceleration along three axis. Those measurements are used to generate CV signals or triggers. The accelerometer board features three modes:

- Tap Detector with continuous CV output
- Tap Detector with trigger output
- The 'motorcycle mode'

Capacitive Touch:

Connect the Capacitive Touch to organic items and use them as a controller, the Field Kit Sensor Interface will send out signals once you touch the matter. Banana rock, Cucumber Swing, Avocado Samba!

Sequential Voltage Source:

The Sequential Voltage Source is a little magical module which you can use in your musical setup quite easily and allows your Field Kit to become a Sequencer too. This board has three different modes: Stepped Random Voltage, CV Sequencer and a Euclidean Trigger Sequencer.
Read more
 2 in stock $51.41
Click for better price!
quote 725946
Cat: 726849 Rel: 04 Apr 19
 
5 x Make Noise style rogan knobs, large
Notes: Make Noise knobs.
Read more
 2 in stock $11.81
Cat: 726846 Rel: 04 Apr 19
 
10 x Make Noise style rogan knobs, medium
Notes: Make Noise knobs.
Read more
 2 in stock $16.78
Cat: 726844 Rel: 04 Apr 19
 
5 x Make Noise style rogan knobs, small
Notes: Make Noise knobs.
Read more
 2 in stock $11.53
Cat: 719530 Rel: 13 Feb 19
 
Precision machined solid oak end cheeks for the Arturia Keystep
Notes: Custom made Solid Oak Arturia Keystep stand with additional 94 HP Eurorack rails - precision machined to give a snug fit for the Arturia Keystep.

The Keystep sits in a recess to stop it from moving or sliding, gripped by the sides which forms a strong and sturdy stand. The oak has been oiled and is ready to assemble and should stay looking beautiful for a long time.
Read more
 1 in stock $104.93
Click for better price!
quote 719530
Cat: 734252 Rel: 13 Feb 19
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Custom made Solid Oak Arturia Keystep stand with additional 94 HP Eurorack rails - precision machined to give a snug fit for the Arturia Keystep.

The Keystep sits in a recess to stop it from moving or sliding, gripped by the sides which forms a strong and sturdy stand. The oak has been oiled and is ready to assemble and should stay looking beautiful for a long time.
Read more
 1 in stock $95.35
Cat: 729651 Rel: 09 May 19
 
Eurorack mounting brackets
Notes: Z-Rails Brackets are used to attach Z-Rails to wood cases without having screws visible on the exterior for a clean, professional finish. Z-Rails Brackets have two holes for wood screws and two holes for Z-Rails screws. Z-Rails Brackets come supplied with both types of screws and no additional screws are required for assembly.
Read more
 3 in stock $9.97
Xaoc Devices Batumi Black Faceplate (synth module faceplate)
Cat: 718925 Rel: 05 Feb 19
 
High quality, black anodized & screenprinted panel
Notes: Replacement black panel for XAOC Devices Batumi, quadruple digital LFO module.

No soldering required.

Width: 10HP
Read more
 4 in stock $36.72
Xaoc Devices Poti Black Faceplate (synth module faceplate)
Cat: 718926 Rel: 05 Feb 19
 
High quality, black anodized & screenprinted panel
Notes: Replacement black panel for XAOC Devices Poti, expander module for the Batumi quadruple digital LFO.

No soldering required.

Width: 3HP
Read more
 2 in stock $27.27
Xaoc Devices Zadar Black Faceplate (synth module faceplate)
Cat: 718928 Rel: 05 Feb 19
 
High quality, black anodized & screenprinted panel
Notes: Replacement black panel for XAOC Devices Zadar 1973 quadruple envelope generator module.

No soldering required.

Width: 10HP
Read more
 2 in stock $34.11
141/41(ページ1/1)の商品

Filter

Synth module accessories
DJ機器
Release Date
Featured
Close