Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

preorders
ホーム  Equipment  オーディオ / MIDIインターフェース
Subscribe here to receive our weekly roundup of the latest studio equipment products

Filter

DJ機器

オーディオ/MIDIインターフェース

On a basic level, audio interfaces feel like quite simple bits of kit: they get sound into your computer and back out again, allowing you to hook studio monitors up to your DAW and record signals from hardware like synths, drum machines and microphones. That being said, there are big differences in features and sound quality from different interfaces. Generally speaking, more expensive audio interfaces offer better sound quality, more inputs and outputs and/or additional features like monitoring controls, built-in compressors and even digital effects. But at every price point there are lots of options, designed to suit different approaches to making music.
Audio interfaces
Options
150/78(ページ1/2)の商品
1  2  »
ESI Amber i1 2x2 24-Bit/192kHz USB 3.1 Audio Interface With USB-C Connector
Cat: 993713 Rel: 22 Feb 24
 
2 input/2 output 24-Bit/192kHz USB 3.1 audio interface with USB-C connector
Notes: The entry into the Amber series

Upgrading ESI's legendary U22 XT, this audio interface offers maximum flexibility and excellent audio quality.

Amber i1 features a new modern eye catching design with an amber coloured volume knob that stands out from the green sand main body colour. Hardware loopback, USB-C, a completely newly designed LED display area, separate line inputs, advanced signal source selection and an exceptional audio quality in this class are just a few of the special features by Amber i1.

XLR INPUT to connect a microphone via XLR cable.
INPUT GAIN CONTROL to change the input gain / input level for Microphone and Hi-Z signals.
PEAK / INPUT LEVEL METER to check the input level.
INPUT INDICATOR to show the selected input (Line/Mic/Hi-Z/Mic+Hi-Z).
INPUT SELECTOR to change the input between Line/Mic/Hi-Z/Mic+Hi-Z.
HEADPHONE VOLUME CONTROL to change the output volume for connected headphones.
+48V PHANTOM POWER SWITCH to provide phantom power for condenser microphones.
HI-Z INPUT to connect an electric guitar with 1/4" TRS cable.
+48V INDICATOR indicates +48V phantom power.
DIRECT MONITORING CONTROL to control the monitoring mix.
MASTER VOLUME CONTROL to control the master output volume.
HEADPHONE OUTPUT to connect a headphone.
USB-C SOCKET to to connect the audio interface to a PC, Mac, or tablet.
LINE OUTPUT 1/2 to connect the audio interface to speakers or an amplifier.
LINE INPUT 1/2 to provide a line input for keyboards, synthesizers, CD-Players, etc.

Everything you need to record

Amber i1 provides everything you need to record vocals and instruments in professional studio quality. The bus powered USB-C audio interface provides superb 24-bit / 192 kHz converters and works with ultra-low latency. It features a high quality microphone preamp with 48V phantom power, a Hi-Z guitar input with gain control and dedicated line level inputs for synthesizers or sound modules.

Realtime processing and best performance

Comfortable real-time input monitoring and master volume controls are directly accessible on the front, also there is a powerful headphone output with independent volume control. Studio monitors can be connected to the balanced outputs. Amber i1 is class compliant and works with any modern Mac (Intel or M1 CPU or better), PC (Windows 10 and higher) and with many portable devices (iPhone, iPad, etc. - an optional Apple Lightning to USB adapter is required for devices with Lightning port). It is compatible with virtually all common audio software thanks to the professional low latency ASIO 2.0 driver for Windows and CoreAudio compatibility on the Mac. A powerful software package incl. the Bitwig Studio 8-Track DAW, Steinberg WaveLab LE for stereo audio editing and Steinberg Cubasis LE for iPad/iPhone is included. The package also includes 3 months of 3000 minutes for JackTrip Virtual Studio.

Perfect driver support

Amber i1 is class compliant and works with Windows 10 / 11 with a high performance EWDM driver supporting ASIO 2.0 and DirectWIRE Routing and with macOS / OS X supporting the Apple CoreAudio driver. You can also use it with iPhone or iPad. Via DirectWIRE Loopback, internal signals can be recorded and processed.
Read more
 1 in stock $89.48
Click for better price!
or call +44 20 7424 1960
quote 993713
IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK)
Cat: 902841 Rel: 01 Jan 90
 
*** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***
Notes: *** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***


Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)
Read more
 2 in stock $209.49
MOTU M2 USB-C 2x2 Audio Interface (B-STOCK)
Cat: 1001270 Rel: 01 Jan 90
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Compact audio and MIDI interface from one of the longest-running and most trustworthy brands in the business. Simple 2x2 setup with clear sound. A great entry-level option for getting sounds in and out of your computer.

Supplier notes:
Equipped with the same ESS Sabre32 Ultra DAC Technology found in audio interfaces costing thousands, the M2 delivers an astonishing 120 dB Dynamic Range on its main outputs. ESS converters also drive the headphone output, which rivals dedicated headphone amplifiers costing hundreds. Ultra-clean preamp circuits produce a measured -129 dBu EIN on the mic inputs. Capture and monitor your audio with pristine clarity.

The M2 provides best-in-class speed for monitoring live inputs (mic, guitar or keyboard) through your computer, thanks to MOTU's expertly engineered USB drivers, which deliver class-leading, ultra-low 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer).

When recording and mixing, nothing is more critical than achieving optimum levels. The M2 is the only audio interface in its class with a full color LCD featuring clear, detailed level meters for all inputs and outputs. Enjoy professional-level volume control and feedback to get your sound just right.

The M2 driver provides convenient loopback channels to your host computer, so you can easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the M2 in your host software for live streaming or podcasting. Streaming and podcasting has never been easier and better-sounding!

Decades of award-winning product engineering for hit songs, mega tours, primetime shows and blockbuster movies goes into every MOTU audio interface.


Read more
 1 in stock $194.75
MOTU 828 28x32 USB3 Audio Interface With DSP Mixing & Effects
Cat: 992959 Rel: 31 Jan 24
 
28x32 USB3 audio interface
Notes: One of the most trustworthy brands in the industry delivers another winner. Proper high-end business, with 12 analogue inputs and 12 outputs, plus an extensive array of digital connections. Great value at this price point.

Supplier's Notes:
Next-gen 28 x 32 USB3 audio interface - Builds on 22 years of proven success as an industry-leading audio interface brand.

New 3.9-inch TFT display - The bright, 24-bit RGB LCD provides 480 x 128 pixel high-resolution metering for all analogue and digital I/O, plus detailed status info and access to hardware settings from a simple and convenient menu.

Superb analogue audio quality and high-end converters - Renowned ESS Sabre32 DAC technology delivers 125 dB dynamic range. Support for all standard sample rates up to 192 kHz.

Ultra-low latency and proven, high-performance MOTU drivers - Round-trip latency (RTL) performance as low as 2 ms at 96kHz with high-performance DAW hosts.

Universal connectivity - Connects to your computer with 5 Gbps USB3 (compatible with USB2) for up to 60 audio channels. Class-compliant firmware and industry standard drivers work with any audio apps. Connects to an iPad™ with USB-C or a Lightning adapter kit (sold separately).

60 simultaneous audio channels - 28 inputs and 32 outputs, including two combo XLR/TRS mic/line/hi-Z guitar inputs with send/return inserts, 8 TRS analogue (line-level) in/out, separate main outs on XLR jacks, two banks of 8-channel optical I/O, stereo RCA S/PDIF digital I/O, and two front-panel headphone outputs.

Advanced mic channels - Cutting-edge components deliver ultra-transparent sound with -114 dB THD+N, 118 dB dynamic range and -129 dBu EIN. Each mic channel provides individual controls for +74 dB of preamp gain, -20 dB pad, 48V phantom power, and phase invert. All settings can be controlled remotely from a computer or iOS device. Each mic channel includes a dedicated send/return insert for outboard gear processing.

Flexible insert returns - When nothing is connected to the front-panel mic inputs, the two rear-panel returns function as additional line inputs with identical signal path characteristics as the other eight line inputs.

DSP mixing and effects processing - Flexible 24-input digital mixer with 8 stereo busses and DSP effects, including reverb, 4-band EQ, gate and compression.

Wi-Fi control - If the 828 is connected to a computer on your Wi-Fi network, you can control everything wirelessly from the CueMix 5 app running on mobile devices or other computers on the same network - even multiple devices at the same time. Manage access to the 828 with network discovery and password protection.

Precision boost/trim for analogue I/O - Calibrate analogue input and output signals in precise 1 dB increments. Apply phase invert individually to analogue inputs.

Control room features - Control your sessions with front-panel "talk" button and "A/B" speaker select buttons to quickly compare your mixes on two sets of studio monitors.

Two flexible headphone outputs - With independent volume control, each headphone output can mirror each other, the Main Outs, any other analogue output pair, any CueMix bus, or any USB output channels. Or you can create a completely customized mix for each headphone that includes live 828 inputs and built-in reverb.

Two banks of optical I/O - Connect outboard digital processors, digital mixers or other gear with 16 channels of ADAT at 44.1/48 kHz or 8 channels of SMUX at 88.2/96 kHz. Bank A can optionally provide stereo TOSLink (optical S/PDIF) I/O up to 96 kHz.

Foot switch input - Connect a standard foot pedal switch (sold separately) for hands-free punch-in and punch-out while recording. Or map the pedal to any keystroke function in your host software.

MIDI in/out/thru - connect MIDI gear without the need for a separate MIDI interface.

Word clock in/out/thru - Supports all sample rates up to 192 kHz.

DC-coupled TRS outputs - Use the 828 to manipulate and sequence voltage-controlled modular synthesizers from a host DAW.

Loopback for live streaming and podcasting - Easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the 828 in your host software for live streaming or podcasting.

Guitar re-amping - Connect your guitar to the front-panel input, use CueMix's near-zero latency to loop to any output (with a re-amp adapter, if needed), and record both the dry signal and your mic'd up amp simultaneously. Then re-amp the dry signal later with different amps and cabs - or amp modelling plug-ins - to experiment with different tones.

CueMix 5 app - Control mixing and settings from your Mac, PC or iOS device.

Performer Lite - Workstation software with over 100 included instruments, dozens of effects and 6 GB of included loops to make music right away. Also includes Ableton Live Lite.

Next-gen 28 x 32 USB3 audio interface with DSP, mixing and effects
New 3.9-inch 24-bit RGB LCD with precision metering for all I/O
Superb analogue audio performance driven by ESS Sabre32 Ultra™ DAC Technology
Ultra-low latency and proven, high-performance MOTU drivers (~2 ms RTL with a 32 sample buffer @ 96 kHz)
Universal connectivity with 5 Gbps USB

Technical Specifications
Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

Mic/line/instr inputs
2 x XLR/TRS "combo" jacks
Individual -20 dB pad and 48V phantom power
Preamp gain: +74 dB in 1 dB increments
1 MO impedance on the line/instr inputs
Independent balanced send/return inserts

Analogue inputs
8 x 1/4-inch TRS line in (balanced/unbalanced)
2 x 1/4-inch insert returns function as balanced TRS line inputs (with no mic inputs connected)
Max level: +21 dBu
+20 dB digital gain on each input

Analogue outputs
8 x 1/4-inch TRS line out (balanced, DC coupled)
2 x male XLR out
Max level: +21 dBu
2 x 1/4-inch TRS stereo headphone
2 x 1/4-inch TRS sends (balanced, pre-converter)

Digital I/O
2 banks (16 ch) of ADAT optical I/O at 1x sample rates
2 banks (8 ch) of S/MUX optical I/O at 2x sample rates
Bank A switchable to stereo TOSLink I/O (optical S/PDIF)
1 x stereo S/PDIF I/O on RCA (up to 96 kHz)

Computer I/O
1 x USB-C 3.2 Gen 1 (5 Gbps) Type C - USB2 compatible USB audio class compliant (no driver needed)
1 x IF-certified USB 3.2 Gen 1 Type C-to-C cable included
Compatible with USB Type A (with a C-to-A cable, sold separately)
Total USB audio channels: see "Total Audio I/O" below
Round Trip Latency (RTL): ~2 ms (32 sample buffer at 96K)

Total audio I/O
28 in / 32 out (60 total channels) at 1x sample rates
20 in / 24 out (44 total channels) at 2x sample rates
10 in / 14 out (24 total channels) at 4x sample rates

MIDI I/O
1 x MIDI In
1 x MIDI Out/Thru
16 MIDI channels to/from computer host

Headphone
2 x 1/4-inch TRS stereo headphones
Output impedance: <1O
Max output: 14.4 dBu

Phantom power: 2 x individual +48V

Foot Switch
1 x 1/4-inch foot switch input
Mapping: pedal up/down to any host keystrokes

Sync I/O
1 x BNC Word Clock In
1 x BNC Word Clock Out/Thru
Sample rates: all (from 44.1 to 192 kHz)

Front panel
2 x XLR/TRS combo inputs
2 x 1/4" TRS headphone outputs
2 x potentiometer - headphone volume
2 x potentiometer - mic/instr input gain
1 x potentiometer - menu navigation
1 x large potentiometer - main volume
12 x switches - (2) 48V, (2) pad, (6) control room, (2) nav
1 x 3.9-inch 480 x 128 pixel 24-bit RGB TFT display
1 x latching power button

Power
Internal 100-240V autoswitching supply
50-60 Hz - 0.5A max

Dimensions and weight
(width x depth x height, enclosure only)
19 x 12.25 x 1.75 inches / 48.26 x 31.1 x 4.44 cm
11 lbs / 5 kgs
Read more
 2 in stock $1,033.80
FORTHCOMING
Black Lion Revolution 6x6 USB-C Audio Interface & Master Clock
Cat: 976053
 
A master clock, standalone DAC & ADC and 6-in/6-out USB audio interface
Notes: Beyond what you expect from an audio interface.

The Revolution 6×6 is an all-purpose studio dynamo that can serve as a master clock, a standalone DAC and ADC, a master clock, and a 6-in, 6-out class-compliant USB interface with audio quality worthy of the Revolution name. Enjoy world-class clocking and low-noise conversion while tracking to the included Studio One Artist. Use the USB OTG connection to sample audio from your phone or tablet... or send audio from your laptop to your mobile device and stream your performance live online. Sync your other hardware devices via Black Lion's proprietary Macro-MMC clocking - all while treating your music with the highest audio quality imaginable.

Audio interfaces don't sound better than this.

Revolution 6×6 is a class-compliant, bus-powered USB audio interface with industry-leading signal quality based on Black Lion's years of experience in audio interface modification. Record anything thanks to balanced XLR, line-level, and instrument-level input options. Connect pro studio monitors or use its two plenty-loud, crystal-clear, mono-summable headphone outputs with direct monitoring mix control. Integrate external gear via the S/PDIF connection and USB OTG.

Rarified tech found in Revolution 6×6 includes the Macro-MMC clock for maximum converter quality, yielding reduced jitter and enhanced harmonics for a glossy, airy top-end you won't hear in lesser interfaces. Proprietary PG-i filtering technology and highly-filtered power rails work with full-circuit power decoupling to further reduce noise contamination. And for the best possible capture and playback, Revolution 6×6 sports the most cutting edge, high-end ICs and Vishay, Nichicon, and Wima capacitors throughout with all internal gain-staging optimized for the best possible signal-to-noise ratio. Last but not least, all analogue I/O is fully decoupled and balanced - right to the very core of the converter!

Standalone mode for DAC and ADC use.

Not every studio task requires a computer. The Revolution 6×6's DAC, word clock, and D/A conversion features can all be used without a computer; just press and hold the "Standalone" button. Hook up your media player via S/PDIF and enjoy good old-fashioned hi-fi listening with good new-fashioned hi-fi conversion, or add two additional output channels from another audio interface or digital mixer.

Many MPCs, synths, and guitar processors also have S/PDIF, which will often deliver better sound than using their onboard converters.

For recording, connect any guitar processor with a S/PDIF output and enjoy high-quality D/A conversion of your custom guitar tones. You can even connect Revolution 6×6 to your computer over USB for hi-fi listening by bypassing the questionable converters in your old laptop. Use S/PDIF to add two channels to an audio interface or digital mixer, all synchronized by the same master clock over BNC.

As a standalone A/D converter, you'll add two superior channels of Black Lion-converted audio over S/PDIF to your existing recording setup - and you won't have to buy an ADAT expander.

Get mobile with USB On-The-Go.

USB On-the-Go connectivity gives the Revolution 6×6 2-in, 2-out connectivity with Android and Apple mobile devices. It's perfect for livestreamers and mobile musicians who record to or stream from phones and tablets. Connect two USB devices to the Revolution 6×6 simultaneously and send audio to and from either. Sample from your phone to your laptop, or livestream an iPad performance from your phone... the possibilities are endless!

Shocking clocking.

The Macro-MMC (Master Music Clock) in Revolution 6×6 was developed from Black Lion's experience creating dedicated word clocks, as well as modifying many embedded clocks found in other recording interfaces. Macro-MMC ensures the best possible performance from its converters, but also allows you to connect external gear via the BNC connections for maximum sync and ultra-low jitter - meaning any devices synced via Macro-MMC are communicating as accurately as possible to minimize the phase distortions that can muddy your high-end and dull your transients.

If you've already invested in a clock you like, that's fine - the Revolution 6×6 graciously accepts clock in.

All the software tools you need, included.

The Revolution Software Suite covers all of your software needs so you can start creating from day one. You'll record straight into the award-winning Studio One Artist, of course... and we've also included select plugins from Izotope, Psychic Modulation, Brainworx, and Lindell:

PreSonus Studio One Artist: Recording and music production DAW

Izotope Elements Suite: Nectar, Neutron, Ozone and RX for tone-shaping, mastering, and repair

Platform: macOS (class compliant), Windows 10+ (driver)
Input Impedance: 2KO mic, 15KO line
Gain Range: 59dB
Frequency Response: 20Hz - 20KHz +/- 0.25dB
THD + N: 0.01% (Min Gain)
Dynamic Range: 112dB (A-Weighted)
Crosstalk: < 100dB
Output Impedance: 47O (balanced)
Dimensions: 330 x 305 x 152mm, 2.72kg
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $609.54
(No payment required now - pay when released)
ESI Neva Uno 2x2 24-bit/192kHz USB 3.1 Audio Interface With USB-C Connector
Cat: 993708 Rel: 26 Jan 24
 
2-in/2-out 24-bit/192kHz USB 3.1 audio interface with USB-C connector
Notes: Whether you're about to become a content streamer or beat maker or anything beyond - with Neva Uno you're ready to go instantly.

Coming at a super affordable price, Neva Uno offers superior audio quality, elegant design and an extensive software package while retaining a compact form. Equipped with professional pre-amplified microphone and guitar inputs as well as two line inputs, it offers everything you need to get started right away. The USB-C port makes it easy to connect to your computer or mobile device. Neva Uno comes with professional ASIO drivers including DirectWIRE loopback function and more, so you can focus on your creativity.

Features

2 input / 2 output 24-bit / 192kHz USB 3.1 audio interface with USB-C connector
XLR combo microphone preamp with +48V phantom power support
Hi-Z instrument input with 1/4" connector
USB bus powered (no additional power adapter needed)
line output with unbalanced RCA connectors
headphone output with 1/4" connector
ADC with 97dB(a) dynamic range
DAC with 107dB(a) dynamic range
Zero latency hardware direct input monitoring activated by switch
Master output volume control
Supports Windows 10, Windows 11 with ASIO 2.0, MME, WDM and DirectSound
Supports macOS via the native CoreAudio USB audio driver from Apple
Stereo hardware loopback channel for internal recording
Includes Bitwig Studio 8-Track DAW
Includes Steinberg WaveLab LE audio editor license
Works with Cubasis LE from Steinberg for iPhone / iPad
Includes 3 month (up to 9000 minute) subscription to JackTrip Virtual Studio
Dimensions: 10.5cm x 9cm x 4cm


Connectors & Functions

+48V PHANTOM POWER SWITCH to provide power for a condenser microphone.

LINE HI-Z SWITCH for input 2 to switch between Line level and Hi-Z guitar signals.

DIRECT MONITORING SWITCH to enable or disable input monitoring to listen to the input signals.

GAIN KNOB 1 to change the input gain / input level for input 1. The LED ring indicates the signal level.

GAIN KNOB 2 to change the gain / input level for input 2. The LED ring indicates the signal level.

VOLUME KNOB to change the main output volume for connected headphones and speakers.

XLR / TRS COMBO INPUT 1 to connect a microphone via XLR cable or a line signal via 1/4" TRS connector.

TRS INPUT 2 to connect a line via 1/4" TS connector.

HEADPHONE OUTPUT to connect headphones.

LINE OUTPUT 1/2 to connect the stereo master line level output signal via RCA cables for left and right channels.

USB-C CONNECTOR to connect the audio interface to a PC, Mac, tablet or mobile phone.

Small, portable and perfect for your podcasting or live streaming applications

This stylish 24-bit / 192 kHz USB-C audio interface is so small, it will instantly become your new companion on the go and in your studio. Neva Uno is USB bus powered and Plug & Play, just plug it in and start working! It works with any modern Mac (Intel or M1 CPU or better), PC (Windows 10 and higher) and with many portable devices (iPhone, iPad, etc.). One XLR/jack combo input will take either your microphone or line signal, while the second 1/4" jack input accepts line or Hi-Z guitar signals. The inputs feature a mic preamp with up to 50dB gain and 48V phantom power support and the analog-to-digital converter provides 97db(a) dynamic range. On the output side, there is an integrated headphone amplifier and stereo line RCA outputs with a digital-to-analog converter with 107dB(a) dynamic range, allowing you to connect a mixer, amplifier or active speakers. You can monitor incoming audio signals with zero latency, just push the direct monitor button.

Neva Uno is compatible with virtually all common audio software thanks to the professional low latency ASIO 2.0 driver for Windows and CoreAudio compatibility on the Mac. There is even a DirectWIRE hardware loopback function that allows you to route and mix different sound sources internally: perfect for podcasting or live streaming applications.

All this turns Neva Uno into an ideal device to get started in the world of digital audio recording, no matter if you create your own music, if you want to mix and edit audio, if you work on your podcast or even for live streaming. And yet there is more: Bitwig Studio 8-Track and Steinberg WaveLab LE are included. On the iPhone and iPad, you can use Cubasis LE from Steinberg.

An alternative to Neva Uno is ESI's larger model Neva Duo with two microphone preamps.
Read more
 1 in stock $52.63
Click for better price!
or call +44 20 7424 1960
quote 993708
ESI Neva Duo 2x2 24-bit/192kHz USB 3.1 Audio Interface With USB-C Connector
Cat: 993711 Rel: 26 Jan 24
 
2 input/2 output 24-bit/192kHz USB 3.1 audio interface with USB-C connector
Notes: Unleash your creativity!

Whether you're about to stream your story, build your beat, track, or do anything beyond that - with Neva Duo you're ready to go instantly and as easy as never before.

Coming at a super affordable price, Neva Duo offers superior audio quality, elegant design and an extensive software package while retaining a compact form. Equipped with professional pre-amplified microphone and guitar inputs as well as two line inputs, it offers everything you need to get started right away. The USB-C port makes it easy to connect to your computer or mobile device. Neva Duo comes with professional ASIO drivers including DirectWIRE loopback function and more, so you can focus on your creativity.

Features
2 input / 2 output 24-bit / 192kHz USB 3.1 audio interface with USB-C connector
2x XLR microphone preamp with +48V phantom power support
2x Hi-Z inputs with 1/4" connector
USB bus powered (no additional power adapter needed)
Line output with balanced/unbalanced 1/4" TRS connectors
Headphone output with 1/4" Stereo connector and separate volume control
ADC with 97dB(a) dynamic range
DAC with 107dB(a) dynamic range
Zero latency hardware direct input monitoring activated by switch
Master output volume control
Supports Windows 10, Windows 11 with ASIO 2.0, MME, WDM and DirectSound
Supports macOS via the native CoreAudio USB audio driver from Apple
Stereo hardware loopback channel for internal recording
Includes Bitwig Studio 8-Track DAW
Includes Steinberg WaveLab LE audio editor license
Works with Cubasis LE from Steinberg for iPhone / iPad
Includes 3 month (up to 9000 minute) subscription to JackTrip Virtual Studio
Dimensions: 13cm x 9cm x 4cm

Connectors & Functions

LINE HI-Z SWITCH 1 for input 1 to switch between Line / Microphone signals and Hi-Z guitar signals.

LINE HI-Z SWITCH 2 for input 2 to switch between Line / Microphone signals and Hi-Z guitar signals.

+48V PHANTOM POWER SWITCH to provide power for condenser microphones.

DIRECT MONITORING SWITCH to enable or disable input monitoring to listen to the input signals.

GAIN KNOB 1 to change the input gain / input level for input 1. The LED ring indicates the signal level.

GAIN KNOB 2 to change the input gain / input level for input 2. The LED ring indicates the signal level.

HEADPHONE VOLUME KNOB to change the output volume for connected headphones.

MASTER VOLUME KNOB to control the master output volume of the main line output signal.

XLR / TRS COMBO INPUT 1 to connect a microphone via XLR cable, a line signal via 1/4" TRS connector or an electric guitar with 1/4".

XLR / TRS COMBO INPUT 2 to connect a microphone via XLR cable, a line signal via 1/4" TRS connector or an electric guitar with 1/4".

HEADPHONE OUTPUT to connect headphones.

OUTPUT LINE 1/2 to connect the stereo master line level output signal via 1/4" TRS cables for left and right channels.

USB-C CONNECTOR to connect the audio interface to a PC, Mac, tablet or mobile phone.

Small, flexible and ideal for entering the world of digital audio recording

This stylish 24-bit / 192 kHz USB-C audio interface is so small, it will instantly become your new companion on the go and in your studio. Neva Duo is USB bus powered and Plug & Play, just plug it in and start working! It works with any modern Mac (Intel or M1 CPU or better), PC (Windows 10 and higher) and with many portable devices (iPhone, iPad, etc.). No additional AC adapter is needed. You can use the integrated 2 preamps with 48V phantom power for condenser or dynamic microphones with up to 50dB gain using XLR inputs or connect an electric guitars via 1/4" Hi-Z inputs. On the output side, there is an integrated headphone amplifier and there are stereo TRS outputs with master volume control allowing you to connect a mixer, amplifier or active speakers. You can monitor incoming audio signals with zero latency, just push the direct monitor button. The total of 2 inputs with 97dB(a) dynamic range and 2 outputs with 107dB(a) dynamic range can be used for line level signals as well.

Neva Duo is compatible with virtually all common audio software thanks to ESI's professional low latency ASIO 2.0 driver for Windows and CoreAudio compatibility on the Mac. There is even a DirectWIRE hardware loopback function that allows you to route and mix different sound sources internally: perfect for podcasting or live streaming applications.

All this turns Neva Duo into an ideal device to get started in the world of digital audio recording, no matter if you create your own music, if you want to mix and edit audio, if you work on your podcast or even for live streaming. And yet there is more: Bitwig Studio 8-Track and Steinberg WaveLab LE are included. On the iPhone and iPad, you can use Cubasis LE from Steinberg.

An alternative to Neva Duo is ESI's even more compact Neva Uno with one microphone preamp.
Read more
 1 in stock $71.58
Click for better price!
or call +44 20 7424 1960
quote 993711
ESI UGM192 Ultra-Mobile Guitar & Microphone USB 3.1 Audio Interface With USB-C Connector
Cat: 993852 Rel: 26 Jan 24
 
24-bit/192kHz USB 3.1 audio interface with USB-C connector
Notes: Extremely portable solution for microphone and guitar recording

UGM192 is an ultra mobile guitar and microphone to USB audio interface with excellent 24-bit / 192kHz / 114dB quality.

This compact device allows you to connect an electric guitar via its Hi-Z instrument input and a professional dynamic or condenser microphone directly to your PC or Mac or to many compatible mobile devices such as smart phones and tablet computers that support USB audio. The rear panel offers a stereo output that you can use for playback and for realtime input monitoring, i.e. with headphones.

This makes UGM192 the perfect companion for guitar and professional microphone recording applications on the road or in your studio. You can use it to jam with a guitar and microphone, process the signal in realtime and listen to the mix directly via headphones - no special additional devices are needed: you simply plug UGM192 between your guitar, headphones, the microphone and your computer or mobile device. As a truly mobile solution, it can even be powered via an optional external battery - just bring this professional preamp anywhere you go!

Features

USB 3.1 audio interface with USB-C connector (cable included)
USB 2.0 compatible (cable included)
USB bus powered
Separate power connector for optional use (microUSB)
Professional microphone preamp with balanced 1/4" TRS connector
Switchable 48V phantom power support
Professional Hi-Z instrument input with unbalanced 1/4" TS connector
Line / headphone output with 1/4" stereo TRS connector
24-bit / 192kHz AD converter (114dB dynamic range A-weighted)
24-bit / 192kHz DA converter (114dB dynamic range A-weighted)
100% class compliant
Works with OS X / mac OS (10.9 and above) with native CoreAudio support (32-bit and 64-bit)
EWDM driver for Windows 7 / 8 / 8.1 / 10 / 11 with ASIO 2.0, MME, WDM and DirectSound (32-bit and 64-bit)
DirectWIRE support under Windows with virtual audio channels for internal loopback recording
Dimensions approx. 87mm x 67mm
Read more
 1 in stock $83.69
Click for better price!
or call +44 20 7424 1960
quote 993852
RME Babyface Pro FS Compact Bus-Powered 24-Channel USB 2.0 Audio Interface (B-STOCK)
Cat: 994794 Rel: 01 Jan 90
 
B-STOCK: Box opened, product unused & in perfect condition
Notes: ***B-STOCK: Box opened, product unused & in perfect condition***


High-end interface specialists RME deliver another winner. Amazing sound quality in a compact package, with TotalMix control, ADAT expansion and built-in MIDI interface.

*** Complimentary warranty on this product for 5 years if purchased from Juno- UK warranty only***

Supplier's notes:
Four years ago the Babyface Pro again demonstrated RME's absolute commitment to superior craftsmanship, not only in audio circuits and driver development, but also in mechanics. Created with the highest precision from a block of aluminium, this high-end portable interface incorporated newly designed analogue and digital circuits. Its innovative energy saving technologies provided supreme fidelity with no compromises in level, noise or distortion.
The two headphone outputs, offering TRS and mini-jack sockets in parallel, have completely separate driver stages to perfectly match low and high impedance headphones, guaranteeing pristine sonic results no matter what type of headphone is used.
For the main I/O RME have designed an XLR socket, which integrates seamlessly into the housing and saves space.
Two digitally controlled preamps provide individually switchable 48V phantom power. These circuits feature a gain range of 76 dB, adjustable in steps of 1 dB, including a relay-driven PAD, resulting in exceptional EIN (Equivalent Input Noise) performance as well as line overload protection, and enough gain for even the lowest level microphones.
Babyface Pro's incredibly efficient design almost never requires an external power supply - it's perfectly stable on USB 3 bus power, and also most USB 2 ports, with no degradation in any technical specification. This makes it perfect for mobile recording, even with a pair of your favourite condenser microphones.
The comprehensive feature set continues with an optical TOSLINK I/O; use as either an ADAT port with SMUX support or SPDIF for sessions up to 192 kHz. In combination with an external ADAT converter, the Babyface Pro fully supports 12 analogue inputs as well as 12 outputs, making it ideal for both live and studio multi-track applications. You can plug any instrument, line or high impedance, into Babyface Pro's jack inputs 3 & 4. Record your guitar on the go, with no additional hardware required. MIDI I/O via an included breakout cable completes the package.
In digital audio, the clock frequency is an essential factor, as it creates the correlation between the audio bits and the time reference. Unfortunately, the clock frequency is not always as stable as desired. The Babyface Pro FS offers the full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity. Excellent performance in all clock modes and High Quality Analog Conversion to hear your mix as it is. Digital format conversion in RME products are done without any loss or degradation, and SteadyClock FS ensures your sonic image will never experience degradation. This helps to optimize recordings and mixes because the soundstage has more depth and clarity.
Like all the latest RME interfaces, the Babyface Pro FS also includes the powerful digital real-time mixer TotalMix FX. It allows fully independent routing and mixing of input and playback channels to all physical outputs. Independent stereo submixes plus a comprehensive Control Room section offer unrivalled monitoring capabilities and unsurpassed routing flexibility.
Babyface Pro FS ships with RME's TotalMix FX, available for Windows and Mac OS X. An iOS version is available as well. This amazingly versatile software allows you to use Babyface Pro in any situation. For example, mixing your guitar and vocals to headphones has never been easier. The FPGA-based DSP mixer adds a flexible, 3-band parametric equalizer to all inputs and outputs. Reverb and delay FX are also available.
The FPGA-based DSP mixer adds a flexible, 3-band parametric equalizer to all inputs and outputs. Reverb and delay FX are also available. Latest generation low latency AD/DA converters, combined with RME's unique SteadyClock FS technology, result in exceptional specifications that will satisfy the most demanding of professionals. Combining a huge feature set with sonic excellence and intuitive control, whether for the studio or on the move, the RME Babyface Pro is the most comprehensive and versatile compact audio interface ever built.
Straight to the core without interference: the reference design of the Babyface Pro leaves nothing to be desired. RME devices are designed to conserve music as it is. Audio signals are passed in their entirety, nothing added, nothing taken. For the new Babyface, the audio circuits have been improved to meet even highest gain levels with best dynamic range. The clever user interface is informative and clearly laid out. It makes access to every feature and configuration mode of the Babyface Pro intuitive and easy to use.
Read more
MRP:$842.20 SAVE 12%
 1 in stock $736.96
ESI M4U eX High Performance USB 3.0 MIDI Interface With Automatic I/O Detection
Cat: 895981 Rel: 26 Jan 24
 
High performance USB 3.0 MIDI with automatic I/O detection
Notes: M4U eX is a compact and yet extremely powerful USB 3.0 MIDI interface with 8 MIDI ports.

Each of the 8 ports can either be used as a MIDI input or as a MIDI output, replacing not only traditional MIDI interfaces like it's popular predecessor models with 4 inputs and 4 outputs, but providing also other possible configurations. For instance, you can use up to 8 outputs at a time or up to 8 inputs, or 6 outputs and 2 inputs - to name some examples. And the best feature? This is all handled automatically, simply based on your connection to other MIDI inputs or MIDI outputs and each automatic input / output configuration is displayed via colored LEDs on the front panel.

M4U eX is not only one of the worlds first USB 3.0 MIDI interfaces, it also includes a USB 3.0 hub with 3 connectors for other USB equipment like software dongles or USB keyboards and others. This can literally turn this device into the central hub for your MIDI and USB musical instrument devices. The class compliant device can be bus powered or if needed for other USB devices, be powered by the included DC power supply.

The Windows 7 / 8.1 / 10 / 11 and macOS compatible device provides not only perfect timing and the highest low latency performance of any MIDI interface in it's class on the market today, it can even be used fully standalone without a computer: different operation modes allow you to route input to output signals, merge MIDI signals or use M4U eX as a MIDI thru box. These modes can be selected with the push of a button when needed.

If the 8 ports are not enough, you can connect multiple units to the computer at one time - plus there is also the larger M8U eX available, with 16 ports.

Features/specifications

USB 3.0 MIDI interface
100% class compliant, works without the installation of a driver
USB bus powered
8 MIDI ports, 4 on the front and 4 on the back
Automatic input and output detection, each port works as a MIDI input or MIDI output
Standalone operation possible
Can be used as MIDI Thru box in standalone mode to send one MIDI signal to 7 outputs
Can be used as MIDI merger in standalone mode to merge 7 MIDI signals to a single output
3-port USB 3.0 hub with external 5V DC power supply to power USB devices (power supply included)
Multiple units can be used with one computer at a time
Downwards compatible to USB 2.0 with a USB 2.0 legacy mode
Optional ESI MIDI Port driver for multi device / multi client operation under Windows available
Dimensions roughly 17.5cm x 12.0cm x 4.5cm
Read more
 2 in stock $120.54
Click for better price!
or call +44 20 7424 1960
quote 895981
Solid State Logic SSL 2+ Recording Pack
Cat: 985407 Rel: 14 Dec 23
 
Recording pack: SSL 2+ interface, condenser mic, shock mount, studio headphones and XLR cable
Notes: The excellent SSL 2+ interface gets bundled up with a vocal mic, headphones and accessories to get you started recording. Great value.

Supplier's Notes:
SSL Recording Pack

Condenser mic, shock mount, studio headphones and XLR cable

Step Up Your Recording Game

Introducing the SSL Recording Pack from Solid State Logic, the all-in-one solution to capture your ideas and record great music. Available in a bundle with an SSL 2+ interface, the SSL Recording Pack includes a condenser microphone with shock mount and thread adapter, closed-back studio headphones and an XLR microphone cable, bringing you everything you need to record with your SSL 2+ interface.

Recording Made Easier

SSL Recording Pack includes everything you need to start recording now. Just plug your SSL microphone and headphones to your SSL 2+ interface and start turning your ideas into records.

SMC 80 Studio Microphone

Capture every detail and nuance of your vocals, guitars and acoustic instruments with the SMC 80 studio condenser microphone.

SHP 20 Headphones

Listen with clarity and detail. Hear every step of your recording and production process with SHP 20.

Included with SSL 2+ Interface

Bring Your Productions To The Next Level

The SSL 2+ Interface include the acclaimed SSL Production Pack, featuring a selection of must-have virtual instruments, plug-ins, samples and DAW, to let your creativity shine and bring your productions to life.

What's in the Kit

SSL 2+
SSL headphones (including 1/4" jack adapter)
SSL condenser microphone, shock mount and thread adapter (5/8" outer and 3/8" inner) for microphone stands
2.5 M XLR microphone cable

Specifications

SHP-20 Headphones
Operating Principle: Closed
Fashion: Supra-aural Transducer Type Dynamic
Loudhailer: 50mm
Impedance: 32 O
Sensitivity: 98 +/-3dB
Frequency Response: 15Hz-25kHz
Max. Power: 1200mW
Rating Power: 300mW
Cable: About 3m (straight)
Plug: 3.5mm + 6.3mm

SMC-80 Microphone
Element: 25mm condenser capsule
Polar Pattern: Cardioid
Frequency Response: 20Hz-20kHz
Sensitivity: -36dB+/-2dB (0dB=1V/Pa at 1kHz)
Output Impedance: 200+/-30% (at 1kHz)
Load Impedance: >1000 O
Self-Noise: 16dB A
Max. Input SPL: 136dB (at 1kHz<1% T.H.D)
S/N Ratio: 78dB
Phantom Power Requirement: 48V DC Phantom Power
Weight: ~340g
Dimensions:55x38x165mm
Read more
 1 in stock $345.30
Solid State Logic SSL 2 Recording Pack
Cat: 985405 Rel: 14 Dec 23
 
Recording pack: SSL 2 interface, condenser mic, shock mount, studio headphones and XLR cable
Notes: SSL Recording Pack

Condenser mic, shock mount, studio headphones and XLR cable

Step Up Your Recording Game

Introducing the SSL Recording Pack from Solid State Logic, the all-in-one solution to capture your ideas and record great music. Available in a bundle with an SSL 2 interface, the SSL Recording Pack includes a condenser microphone with shock mount and thread adapter, closed-back studio headphones and an XLR microphone cable, bringing you everything you need to record with your SSL 2 interface.

Recording Made Easier

SSL Recording Pack includes everything you need to start recording now. Just plug your SSL microphone and headphones to your SSL 2 interface and start turning your ideas into records.

SMC 80 Studio Microphone

Capture every detail and nuance of your vocals, guitars and acoustic instruments with the SMC 80 studio condenser microphone.

SHP 20 Headphones

Listen with clarity and detail. Hear every step of your recording and production process with SHP 20.

Included with SSL 2 Interface

Bring Your Productions To The Next Level

The SSL 2 Interface include the acclaimed SSL Production Pack, featuring a selection of must-have virtual instruments, plug-ins, samples and DAW, to let your creativity shine and bring your productions to life.

What's in the Kit

SSL 2
SSL headphones (including 1/4" jack adapter)
SSL condenser microphone, shock mount and thread adapter (5/8" outer and 3/8" inner) for microphone stands
2.5 M XLR microphone cable

Specifications

SHP-20 Headphones
Operating Principle: Closed
Fashion: Supra-aural Transducer Type Dynamic
Loudhailer: 50mm
Impedance: 32 O
Sensitivity: 98 +/-3dB
Frequency Response: 15Hz-25kHz
Max. Power: 1200mW
Rating Power: 300mW
Cable: About 3m (straight)
Plug: 3.5mm + 6.3mm

SMC-80 Microphone
Element: 25mm condenser capsule
Polar Pattern: Cardioid
Frequency Response: 20Hz-20kHz
Sensitivity: -36dB+/-2dB (0dB=1V/Pa at 1kHz)
Output Impedance: 200+/-30% (at 1kHz)
Load Impedance: >1000 O
Self-Noise: 16dB A
Max. Input SPL: 136dB (at 1kHz<1% T.H.D)
S/N Ratio: 78dB
Phantom Power Requirement: 48V DC Phantom Power
Weight: ~340g
Dimensions:55x38x165mm
Read more
 1 in stock $289.50
Click for better price!
or call +44 20 7424 1960
quote 985405
Arturia AudioFuse 16Rig 16-In/12-Out Audio & MIDI Interface
Cat: 975571 Rel: 20 Nov 23
 
16-in/12-out audio and MIDI interface
Notes: Arturia's flagship audio interface is designed for maximum versatility as well as top quality sound. With 16 analogue inputs, 12 analogue outputs and an array of digital I/O including ADAT, MIDI and clock, your creative process won't be interrupted by reconfiguring your hardware.

Supplier's Notes:
AudioFuse 16Rig

Studio mastermind interface

AudioFuse 16Rig is a high-density audio interface that combines an unmatched array of connections with a creativity-first workflow, built to handle a hardware-focused setup and keep your devices always in sync, always sounding pristine, and always ready to go.

Make your sound count

Introducing an interface that lets you leave everything connected, route anything to anything, and be more creative with your projects.

A workhorse hub of connections and smart features designed to get the job done, no matter the complexity. A powerful, reliable production tool that can be moulded to suit your audio setup, your workflow, and your sound.

A standalone mixer

For DAWless recording, live mixing, and outside-the-box audio configuration, AudioFuse 16Rig just works. Fire up its two low-latency internal mixers for sessions away from the studio, process audio & MIDI without a computer connection, and save your configurations for instant recall and quick setup switching.

Intricate audio routing

Get hands-on with an interface that lets you configure its connections to suit any need, including multiple sends/returns for effects, quick A/B speaker monitoring, and more. The included AudioFuse Control Center even features a matrix for quick 'connect anything and everything' configuration.

Quantity, meet quality

Give every recording the shine, clarity, and projection it deserves with two high-quality digitally-controlled preamps and 24-bit AD/DA converters from ESS and Cirrus Logic. Whether it's red-hot synths, dynamic guitars, delicate vocals, or any combination of inputs, expect top-notch sound across the board.

Choose your workflow

Your interface should adjust to suit your setup, not the other way around. Control AudioFuse 16Rig's settings via the display or the included software, configure it for desktop or 1U rackmount operation, use the DC-coupled outputs to send signals to synth modules, and connect your high-impedance headphones.

It's time your music had an upgrade

x16 ADAT I/O
x8 Analog Line DC coupled Outputs
x16 Analog Line Inputs
x1 MIDI In & 2x MIDI Out/Thru
Wordclock I/O
24-bit AD/DA 192kHz
Creative FX Bundle Included

Smart design

Sometimes it's the little things that matter most. You need your gear to complement and enhance the way you work, and that's the driving force behind AudioFuse 16Rig.

See how every piece of the AudioFuse 16Rig puzzle fits together to deliver a dream interface for audio & music hardware lovers.

Premium FX included

Every AudioFuse interface comes with an ever-evolving suite of creative plugins curated from Arturia's award-winning FX Collection. Refine any incoming audio with vintage studio tools, get experimental with contemporary effects, and embark on a journey through classic & modern sounds with Analog Lab.

AudioFuse Range

The new studio reference

The AudioFuse interface range connects your computer to the world of music. Record with the highest quality, monitor with absolute precision, and bring all of your gear together to create the music you always wanted to.

Analogue signal path

The highest quality components are used in the input and output signal paths of the AudioFuse series, giving you an audiophile-quality experience with no compromise.

Powerful monitoring

Multiple outputs, integrated A/B switching, monitor mix options, and even headphone outputs with both 3.5mm and 6.35mm connectors. The AudioFuse makes monitoring a joy.

Huge versatility

Each AudioFuse interface has its own unique set of features designed to make recording as fun and easy as possible.

Main Features

16 x TRS analogue inputs
Includes 2 x high-quality digitally-controlled preamps
Inputs 3 & 4 also available as 3.5mm stereo input

12 x analogue outputs
Includes 8 x DC-coupled TRS line outputs
Stereo monitor outputs
6.35mm front-panel outputs for reamping, dual-headphones

2 x ADAT in, 2 x ADAT out

Up to 16 channels of I/O at 48kHz, 8 channels at 88.2/96kHz

Wordclock in & out

1 x MIDI in, 2 x MIDI out/thru
5-pin DIN connectors
Route MIDI standalone

Low-latency USB-C connection

Class-compliant MIDI
3 x USB hub connections

Two internal standalone mixers

No computer connection needed
Cue mixer for sub-mixing and added flexibility
Main mixer controllable by MIDI

Color display with rotary control & menu buttons
Desktop or 1U rackmount configuration
Includes AudioFuse Control Center
Includes AudioFuse Creative Suite

Analog Lab Intro
Comp DIODE-609* NEW
Pre 1973
Pre V76
Pre TridA
Filter MINI
Chorus JUN-6
Comp FET-76
Delay TAPE-201
Rev PLATE-140
Phaser BI-TRON

What's in the box

Box content
AudioFuse 16Rig unit
Power supply
2x USB cable

Instrument dimensions
size : 17.3 x 11.6 x 1.7 inches (493 x 294 x 43mm)

Platform requirements

Windows
Win 10+ PC: 4 GB RAM; Intel i5 CPU or faster
1GB free hard disk space
OpenGL 2.0 compatible GPU

Apple
10.13+: 4 GB RAM; Intel i5 CPU or Apple Silicon CPU
1GB free hard disk space
OpenGL 2.0 compatible GPU
Read more
MRP:$1,293.83 SAVE 12%
 1 in stock $1,134.86
IK Multimedia iRig USB Digital USB-C Audio Interface (B-STOCK)
Cat: 980983 Rel: 01 Jan 90
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The bestseller goes digital

iRig USB gives guitar and bass players an affordable and easy way to practice, play and record at home or on the go. This digital version of IK's widely popular iRig 2 features a sleek new enclosure with USB-C connectivity and comes bundled with IK's latest amp and effects modelling technology.
Easily record ideas or jam along to your favourite backing tracks with killer tones and without the need of any other gear. When it's time to play out loud, iRig USB offers a dedicated Amp Out so you can use your device tones with a real rig for playing and performing.

Whether it's through headphones or loudspeakers, iRig USB makes playing fun again and inspiring wherever you go.

Key features

Compact audio interface for guitar or bass
Works with iPad, Mac, PC and iPhone 15*
1/8" headphones out for silent practice
1/4" Amp out connects to your amp or pedalboard
Works with your favourite learning, practice and recording apps
Packed with AmpliTube & TONEX amp modelling apps
Powered by your device, no batteries required
*Lightning devices require Apple's Lightning to USB 3 Camera Adapter

Ultra-compact with big sound

iRig USB is small enough to fit in your pocket, yet features a wide frequency response and dynamic range on the instrument input to work with any guitar or bass, active or passive. Setting your level is quick and easy using the large gain control knob with clipping indicator. And for listening back, both the Headphone Out and Amp Out offer exceptional sound quality for a device this size.

Play more, learn faster

Practicing should be fun and inspiring. Use iRig USB anywhere and connect to the most popular learning apps while playing through the best amp models. Use the included TONEX and AmpliTube apps to load one of your go-to tones then launch your preferred app to study music, tabs or the original song. It's never been easier to make progress on your guitar journey.

Rcording ideas

Next time inspiration hits, launch your favourite app and start recording in seconds. iRig USB is recognized by all desktop and iOS** recording apps. TONEX and AmpliTube for Mac/PC both work standalone or as plug-ins inside your favourite DAW so it's easy to record a DI or a processed guitar part. On mobile devices, you can use iRig USB to record a DI or record a processed guitar part with the included TONEX or AmpliTube CS for iPhone and iPad.

**with iOS lightning device, the iRig USB will require a CCK connector/adapter.

Exclusive software included

iRig USB is ideal for exploring new sounds for guitar and bass. With Mac/PC and iOS versions of both TONEX and AmpliTube included, you'll always have your dream rig with you for practicing and recording.

TONEX SE gives you the power of AI Machine Modelling and comes loaded with 200 Premium Tone Models, which are captures of real amps and pedals, plus you can browse, demo and download unlimited Tone Models from ToneNET. You can even use TONEX software for capturing your own amp and pedals to use at home, on the go and inside AmpliTube 5.

AmpliTube 5 SE for Mac/PC plus AmpliTube for iOS offer the ultimate tone processing and recording studio. Both versions give you essential amps, effects and speaker cabs to create amazing guitar and bass tones. Play, practice and record on your desktop or mobile device with the most authentic and hyper-realistic gear models ever made.

Jamming out with friends

No more lugging a pedalboard to rehearsal spaces or someone's garage. Access to all your favourite tones is right in your pocket. Just show up, connect iRig USB's Amp Out jack to an external amplifier or powered monitor and start playing incredible-sounding AmpliTube presets or TONEX Tone Models from your iOS device (or laptop).

Grow wherever you go

Whatever your level and style of music, iRig USB will keep you connected to the newest and best tools for sounding great, learning new songs, advancing as a player and recording ideas. Sound better, play more and improve faster throughout a lifetime of guitar with iRig USB.

Common

AD and DA resolution: 24-bit
Sampling rate: 44.1 kHz and 48 kHz
Host connection: USB Type-C socket

Instrument Input

Input impedance: 500 kOhms
Maximum input level: +13.5 dBu
Frequency response: From 20 Hz to 20 kHz within 0.5 dB (48 kHz sample rate)
Dynamic range: 90 dB(A)

Amp Output

Configuration: Unbalanced
Output impedance: 3.3 kOhms
Frequency response: From 10 Hz to 20 kHz within 1 dB (48 kHz sample rate)
Dynamic range: 97 dB(A)

Headphone Output

Output impedance: 22 Ohms
Maximum output level: approx 6mW into 50 Ohms load
Frequency response: From 10 Hz to 20kHz within 1 dB (48 kHz sample rate)
Dynamic range: 94 dB(A)

Package includes

iRig USB interface
USB-C to USB-C cable (60 cm/23.62")

Dimensions

Size: 99 mm/3.9" x 42 mm/1.65" x 25 mm/0.98"
Weight: 54 g/1.9 oz.

Compatibility

Computers

Mac: macOS 10.6 or later. One free USB port.

Windows: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.

iOS Devices

Compatible with iPhone and iPad devices with USB-C connector.

Also compatible with iPhone and iPad devices with Lightning connector using Apple's Lightning to USB 3 Camera Adapter.

Android Devices

Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.
Read more
 2 in stock $68.09
Arturia MiniFuse Recording Pack (white)
Arturia MiniFuse Recording Pack (white) (audio interface/microphone/shockmount/pop filter/studio headphones/XLR cable/music production softwares)
Cat: 955510 Rel: 19 Oct 23
 
Recording pack: MiniFuse 2, CM1 cardioid microphone with shockmount and pop filter, EF1 closed-back monitoring headphones, XLR cable and 6 premium music-making software titles.
Notes: Record your voice, guitar, piano, synth, or any audio, and create great-sounding tracks with a plug-and-play bundle that does it all. For beginners, songwriters, content creators, and everyone in between, the MiniFuse Recording Pack gives you professional sound in a simple, fun, creative package - whatever your style.

Your recording all-in-one

Whether you're a beginner music maker, a content creator, a producer with limited space, or a musician on a budget, enjoy a pro-grade recording bundle for vocals, guitars, percussion, and more - without breaking the bank.

Plug-and-play interface

MiniFuse 2 gives you 2 audio inputs & outputs, MIDI for connecting synths & drum machines, and easy to use controls that work right out the box. Recording has never been so easy.

Make your voice heard

Capture your voice & instruments with supreme clarity without hassle. Follow the included step-by-step guide to connect your CM1 cardioid microphone and get recording - it even comes with a shockmount & pop filter to keep your recordings clean & noise-free.

Hear your sound come to life

Monitor your mix in studio-grade detail and comfortably smash out long sessions with the included EF1 closed-back monitoring headphones, great for production, live recording, and even just listening at home or on the move.

DAW music creation, your own way

Enjoy the most versatile & inspiring software bundle at this price point. From an introduction to an industry-standard DAW to a range of creative effects and audio enhancing tools, take your production to another level

Main Features

All-in-one audio interface recording bundle
Premium software bundle included
Analog Lab Intro with 500 vintage & modern keyboard presets
Rev PLATE-140 reverb
Pre 1973 vintage preamp
Delay TAPE-201 echo
Chorus JUN-6 analogue chorus
Ableton Live Lite

2 x combo Mic/Inst/Line XLR Input with 48V phantom power
2 x 1/4'' TRS balanced line outputs with volume control
1 x stereo headphones output with volume control
1 x 5-pin MIDI input & output
1 x USB2 type A hub (250mA max.)
1 x stereo virtual loopback channel
USB-C interface compatible with PC and Mac
Bus-powered

Microphone
Capsule: Condenser (Cardoid)
Sensitivity: -36 dB +3 dB (0 dB = 1 V/Pa at 1 kHz)
Frequency response: 20 Hz to 20kHz

Headphones
Type: Closed-back
Drive diameter: 40 mm

MiniFuse 2
2x Inputs
2x Outputs
1x Headphone
1x MIDI I/O

Subscriptions - Complimentary introductions to audio & mixing services:
Splice Creator Plan
Auto-Tune Unlimited

What's in the box

Box content:
MiniFuse 2 Unit
USB-A to USB-C cable
CM1 cardioid microphone with shockmount & pop filter
EF1 closed-back monitoring headphones with adapter
3m XLR cable

Platforms requirements

Windows
Win 10+ (64bit)
2.5 GHz CPU
4 GB RAM
2GB free hard disk space
OpenGL 2.0 compatible GPU

Apple
Mac OS 10.13+
2.5 GHz or Apple Silicon CPU
4 GB RAM
2GB free hard disk space
OpenGL 2.0 compatible GPU
Read more
MRP:$293.72 SAVE 12%
 1 in stock $258.96
IK Multimedia iRig HD X Universal Guitar Interface For iPhone/iPad/Mac/PC
Cat: 958670 Rel: 04 Sep 23
 
Universal guitar interface for iPhone, iPad, Mac and PC.
Notes: Sound your best anywhere

A great interface is the one that's always there for you. iRig HD X is the new flagship of the iRig guitar interface family, bringing breathtaking sound quality and even more advanced features to guitarists everywhere. Compact enough to store in your gig bag, iRig HD X lets you connect anytime with inspiring new ways to play and sound amazing.

Practice with popular learning apps or favorite songs. Browse and discover thousands of new tones on ToneNET. Record ideas wherever inspiration strikes. Stream videos of you jamming to backing tracks. Warm up before gigs with all your favorite tones. No matter where you are on your musical journey, with iRig HD X the possibilities are endless.

Your new mobile dream rig

iRig HD X + TONEX and AmpliTube for iPhone and iPad gives you an incredibly versatile mobile rig with 2 powerful ways to find your sound: TONEX using IK's AI Machine Modeling technology, and AmpliTube offering the ultimate tone processing and recording studio. Play, practice and record on your mobile device with the most authentic and hyper-realistic gear models ever made.

Ultra-compact, high-quality audio

iRig HD X features a whisper quiet and transparent instrument preamp with wide frequency response and dynamic range that ensures every nuance of your playing is accurately translated while preserving the true tone of your instrument. The Headphone Out and Amp Out are equally high end offering exceptional sound quality in a device this portable.

One knob to do it all

iRig HD X sports an all-new enclosure featuring a LED ring input level indicator that also doubles as an ultra-fast and precise tuner for the connected instrument. Its ergonomic, multi-function knob lets users quickly adjust headphone level, loopback functions, direct monitoring and the tuner.

Reach your guitar goals faster

Practicing should be fun. With iRig HD X you'll be inspired by professional guitar tone while you learn. From anywhere, easily connect to the most popular learning apps while playing through the best amp models. Use the included TONEX and AmpliTube apps to load one of your go-to tones then launch your preferred app to study music, tabs or the original song. It's that easy!

Discover the best tones online

iRig HD X comes with AmpliTube 5 SE with 80 models covering all the "must have" gear. You also get TONEX SE for Mac/PC and iOS, which includes 200 Premium Tone Models plus unlimited user Tone Model downloads from ToneNET. You can browse, demo and download new guitar and bass tones within TONEX or build the ultimate guitar rig with AmpliTube 5.

Have fun playing along

Imagine finding perfect guitar tones from ToneNET for songs you love. Got a few minutes to play? Just plug-in and open up AmpliTube or TONEX and start jamming with incredible tone. No need to plug in a pedalboard or out-board gear. Play along with backing tracks on YouTube or from your music library or streaming service. Staying inspired has never been this easy.

Jamming and performing with friends

With iRig HD X it's easy. No more lugging a pedalboard to rehearsal spaces. All you need is right in your gig bag. Just show up and connect the Amp Out jack to an external amplifier or powered monitor. Everyone will be amazed by your tone as you load favorite AmpliTube presets or TONEX Tone Models from your iOS device (or laptop).

Recording audio tracks

iRig HD X is recognized by all desktop and iOS recording apps. TONEX and AmpliTube for Mac/PC work standalone or as plug-ins inside your favourite DAW so it's easy to record a DI or a processed guitar part. You can use the Loopback+ feature of iRig HD X (which acts like a virtual FX loop) to route your guitar signal first to TONEX or AmpliTube and then into your recording app.

Recording and streaming Video

The same feature that lets you record processed audio on your mobile device also lets you record or stream video with your amazing guitar tones sounding crystal clear. Use the Loopback+ feature of iRig HD X to route your guitar signal first to TONEX or AmpliTube and then into the video recording App on your iPhone or your streaming App of choice. You fans will love how great you sound.

With more ways to connect on more devices and with all your favourite apps, iRig HD X is your all-access pass to limitless musical experiences.

Ideal for all players

Whatever your level and style of music, iRig HD X will keep you connected to the newest and best tools for sounding great, learning new songs, advancing as a player and sharing the music you make with others. Sound better, play more and improve faster throughout a lifetime of guitar with iRig HD X.

Specifications

Common
AD and DA resolution: 24-bit
Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Host connection: USB Type-C socket

Instrument Input
Input impedance:1 MOhms
Maximum input level: +9 dBu
Frequency response: From 20 Hz to 20 kHz within 3 dB (96 kHz sample rate)
Dynamic range: 115 dB(A)

Amp Output
Configuration: Unbalanced
Output impedance: 3.3 kOhms
Output level: 0 dBFS corresponds to -2 dBu
Frequency response: From 15 Hz to 40 kHz within 1 dB (96 kHz sample rate)
Dynamic range: 97 dB(A)

Headphone Output
Output impedance: 22 Ohms
Maximum output level: approx.. 8 mW into 32 Ohms load
Frequency response: From 15 Hz to 40 kHz within 1 dB (96 kHz sample rate)
Dynamic range: 95 dB(A)

Package includes
iRig HD X interface
USB-C to USB-C cable (60 cm/23.62")
USB-C to Lightning cable (60 cm/23.62")

Dimensions
Size: 99 mm/5.35" x 42 mm/2.27" x 25 mm/1.35"
Weight: 54 g/1.9 oz.

Compatibility

iOS Devices
Made for: iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone SE (2nd and 3rd generation), iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Air (3rd, 4th and 5th generation), iPad (9th generation), iPad mini (5th and 6th generation), iPad Pro 12.9-inch (1st, 2nd, 3rd, 4th and 5th generation), iPad Pro 11-inch (2nd and 3rd generation), iPad (8th generation), iPad Pro 11-inch, iPad Pro 10.5-inch, iPad Pro 9.7-inch, iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad (5th, 6th and 7th generation), iPod touch (6th and 7th generation).
Also compatible with all newer iPhone, iPad and iPod touch models.

Computers
Macr: macOS 10.6 or later. One free USB port.
Windowsr: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.
Read more
MRP:$147.39 SAVE 10%
 1 in stock $133.18
Click for better price!
or call +44 20 7424 1960
quote 958670
RME FireFace 802 FS 60-Channel 192 kHz High-End USB 2.0 Audio Interface
Cat: 951257 Rel: 12 Jul 23
 
60-channel 192 kHz high-end USB 2.0 audio interface
Notes: Upgraded FS version of the Fireface 802 features improved digital connectivity and DC-coupled analogue outputs. Same TotalMix DSP, high-end pre-amps and low-latency conversion as the original version.

*** Complimentary warranty on this product for 5 years if purchased from Juno- UK warranty only***

Supplier's Notes:
The Fireface 802 FS is a highly integrated pro audio solution for live and studio use, designed for users who require stability and ultra-low latency operation, as well as an unrivalled professional feature set.

Alongside 60 channels (30 inputs / 30 outputs) of analogue and digital I/O, the Fireface 802 FS benefits from newly developed analogue and digital circuitry with improved performance, as well as a host of professional features.

Like all RME audio interfaces, the Fireface 802 FS benefits from TotalMix FX, RME's digital high-end mixer and signal router. Driven by powerful DSP with integrated EQ, Dynamics and Reverb/Echo effects at up to 192 kHz, plus a built-in monitoring controller, TotalMix FX offers powerful, flexible control of all audio channels.

The full-blown feature set also includes optional Class Compliant mode and operation with TotalMix FX for iPad, RME's app to fully control the 802 FS from the iPad, without any computer. The easy-to-use app includes metering for all 60 channels plus effects bus, different setup screens, and complete control of all features.
A high-end recording, mixing and mastering solution, the RME Fireface 802 FS is packed with professional features including:

DC-Coupled Outputs
SteadyClock FS
Class Compliant Operation
Powerful integrated DSP
TotalMix FX
TotalMix Remote
Support for the Advanced Remote Control USB (sold separately)

Enhance Your Recording Setup - Discover Unmatched Flexibility

The Fireface 802 FS benefits from ultra-low latency operation thanks to RME's renowned USB driver technology and driver stability. SteadyClock FS jitter suppression, individually switchable reference levels for all inputs and outputs and identical operation on Windows PC and Mac completes the package.

The Fireface 802 FS is based on a newly developed analogue and digital board. While the analogue board offers DC-coupled analogue outputs as well as new AD and DA converters, the digital board also enables interesting new features thanks to updated high-tech components.

The front panel of the Fireface 802 FS provides four high-performance XLR/TRS combo inputs for microphone, instrument and line signals and two stereo headphone jacks with +17 dBu output level, to provide high volumes even with hi-impedance headphones.

The rear panel reveals the full connectivity of the Fireface 802 FS. As well as MIDI and Word Clock I/O, the Fireface 802 FS is equipped with two optical ADAT I/Os, an AES/EBU I/O, and eight balanced analogue line-level inputs and outputs.

With the new Multi-Mode, the two ADAT I/Os can be used as separate optical SPDIF inputs and outputs in addition to the AES I/O. Users will also find a USB A port for connecting directly the optional ARC USB, offering tactile control of TotalMix FX.

Professional High-Transparency Preamps

The Fireface 802 FS features four crystal-clear preamps with ultra-low latency converters, using the classic technology of the OctaMic II, a high-end preamp providing supreme sonic quality.

All four preamps deliver extremely low distortion, excellent signal to noise ratio and a perfect linear frequency response, providing a premium solution for transmitting and amplifying any audio input exactly as it is heard, be it high-level stage or typical studio signals, lower level and high-impedance instruments, or dynamic, condenser and ribbon microphones.

The four inputs on the front use balanced XLR/TS combo sockets and operate alternatively as Hi-Z inputs. Directly plug in up to four guitars or other instruments - no other hardware required. Each channel can be individually switched to 48V phantom power or instrument mode. LEDs for signal, clip, TS operation and activated phantom power provide overview on the unit's status.

The Fireface 802 FS continues RME's tradition of designing full-featured, flexible and expandable audio systems. Adding additional preamplifiers or more analogue inputs is easily done via the dual ADAT optical I/Os on the rear.

SteadyClock FS - FemtoSecond Clocking Technology

The RME Fireface 802 FS also features RME's latest digital clocking and jitter rejection technology, 'SteadyClock FS'.

Originally developed for RME's award-winning ADI-2 Pro FS range of high-end converters, SteadyClock FS reduces intrinsic jitter to a new all-time low, when converting to and from analogue over all digital formats.

All clock modes provide excellent performance and astonishingly high-quality analogue conversion, allowing you to hear your mix exactly as it is.

What's more, RME's digital format conversion occurs without any loss to the signal, and SteadyClock FS ensures your sonic image will never experience any kind of degradation, ensuring the soundstage is replicated to the fullest depth and clarity.

Powerful Applications for Mixing, Monitoring and Measurement included

The Fireface 802 FS comes with the TotalMix FX DSP mixer offering comprehensive routing and monitoring options, as well as the DigiCheck Analyzer allowing to measure and analyse the digital data feed in both directions with maximum precision.

TotalMix FX can completely replace an external mixer, enabling the creation of multiple latency-free monitor mixes with EQ, Dynamics, Reverb and Delay for any outputs, incl. main monitors and headphone mixes for musicians.

The additional TotalMix Remote is a remote control for TotalMix FX, to control the hardware mixer and effects in RME audio interfaces. TotalMix Remote mirrors the current state of the host system on the iPad and Windows/Mac computers - the entire mixing state, the complete routing, all FX settings, up to the level meters, and everything in real-time. Easily adjust all the mixer and FX settings from a distance, via Ethernet and WiFi.

General Specifications

Power supply: Internal switching PSU, 100 - 240 V AC, 30 Watt
Idle power consumption: 15 Watts
Typical power consumption: 22 Watts
Dimensions including rack ears (WxHxD): 483 x 44 x 242 mm (19" x 1.73" x 9.5")
Dimensions without rack ears (WxHxD): 440 x 44 x 235 mm (17.3" x 1.73" x 9.3")
Weight: 2.8 kg ( 6.2 lbs)
Temperature range: +5- up to +50- Celsius (41- F up to 122-F)
Relative humidity: < 75%, non condensing
Read more
MRP:$1,894.95 SAVE 11%
 2 in stock $1,682.55
Rode Streamer X Audio Interface & Video Capture Card (B-STOCK)
Cat: 958521 Rel: 01 Jan 90
 
B-STOCK: Box opened, light surface marks, product in perfect working condition
Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


The Streamer X is a professional video capture card, audio interface and control surface integrated in one compact device that makes creating incredible content incredibly easy. It features studio-grade audio inputs for XLR microphones and instruments, headsets and RODE wireless microphones, with an ultra-low-noise, high-gain Revolution Preamp and powerful APHEXr audio processing delivering pristine sound quality. HDMI connections offer up to 4K30 / 2K60 streaming and 2K120 / 4K60 pass-through for incredible video quality in a wide range of applications, from streaming and gaming, to podcasting and content creation, to business presentations. Dual USB-C connections seamlessly accommodate dual PC setups, and four fully customisable SMART pads allow for on-the-fly triggering of sound or voice FX and other actions on a computer. It is also fully compatible with RODE software, including UNIFY, RODE Central and RODE Connect for expanded functionality and unmatched flexibility.

Key Features:

Professional video capture card, audio interface and control surface integrated in one compact, easy-to-use device
4K30 video capture and 4K60 pass-through via HDMI
Studio-grade Revolution Preamp with Neutrikr combo jack for XLR microphones or line-level instruments
3.5mm TRRS input for connecting headsets
Integrated wireless receiver for connecting RODE Series IV wireless devices (including the Wireless GO II and Wireless ME)
Dual USB-C interfaces for connecting to two computers or mobile devices
Four SMART pads for triggering sounds, voice FX and other actions on a computer
Compatible with RODE software suite, including UNIFY, RODE Central and RODE Connect
Designed and made in RODE's precision manufacturing facilities in Sydney, Australia
Read more
 1 in stock $236.87
IK Multimedia AXE I/O One 1-In/3-Out USB Audio & MIDI Interface
Cat: 932613 Rel: 16 Jun 23
 
USB audio interface with Z-Tone input, MIDI and Amp Out. Comes with TONEX SE and AmpliTube 5 SE.
Notes: AXE I/O ONE is the ultimate compact and affordable 1-in/3-out audio interface designed for guitarists, musicians and engineers who want the best sound possible for recording guitar or bass. It combines IK's patent-pending Z-Tone impedance control, an Amp Out for Tone Modeling, multiple circuit topologies, and award-winning AmpliTube and TONEX software for a complete digital studio rig.

AXE I/O ONE delivers professional audio with sample rates up to 192 kHz, 108 dB dynamic range, and 9 Hz-45 kHz frequency response.

AXE I/O ONE offers a simple, streamlined setup for Tone Modeling and re-amplification. Use the Amp Out to create a virtual Tone Model of your amp, cab or pedals including distortion, overdrive, EQ, Fuzz and boost. The Amp Out can also be used as a standard re-amping output for even more creative options.

AXE I/O ONE's main channel offers 3 different circuit topologies. This gives you three different options to dial in the perfect tone for any type of guitar pickup or style.

The PURE setting offers a completely transparent and ultra-accurate instrument preamp that won't colour your sound in any way.

Switching to the Class A JFET input buffer adds midrange focus, warmth and harmonic enhancement, giving you more tonal options from the same instrument.

ACTIVE pickups don't require a Hi-Z input, so this setting bypasses unnecessary gain stages to keep your signal path as direct, transparent and clean as possible.

AXE I/O ONE's patent-pending Z-Tone circuit lets you go from a tighter/sharper tone to a thicker bolder tone with a simple twist of a dial. Z-Tone changes the impedance from 1 MO ("sharp") down to 2.2 kO ("bold") giving you ultimate freedom to dial in the perfect feel and tone from electric guitar and bass pickups.

AXE I/O ONE offers a PURE mic preamp designed for transparent and clean recording. The mic preamp offers a wide, flat frequency response: 9 Hz to 45 kHz, +/- 0.5 dB (at 96 kHz) to avoid unwanted coloration and perfectly preserve the sonic character of your voice, acoustic guitar, piano or other instrument.

It's also ideal for capturing your rig with IK's groundbreaking TONEX AI-based Tone Modeling software. With both AmpliTube 5 SE and TONEX SE included, you'll have everything you need to record, model and play right out of the box, plus AXE I/O ONE works with all your favourite recording applications.

AXE I/O ONE offers a range of useful features including dedicated controller inputs that let you connect up to two expression pedals or two single/double switches to control AmpliTube, or any other software, in real-time without putting your hands down. You can also use AXE I/O ONE's MIDI input and output to connect floor controllers or iRig Stomp I/O to add even more real-time controls - or use it with regular keyboards and other standard MIDI gear.

Best-in-class guitar tone

Selectable Active/Passive/discrete JFET/PURE instrument preamp
Patent-pending Z-Tone input for a tonal palette never heard before
Amp Out for Tone Modeling or re-amplification
Connect up to 2 expression pedals, single and double-switches
Lightweight compact design for recording on the go
Includes AmpliTube SE, TONEX SE, and Ableton Live Lite

Premium studio sound

High-resolution, ultra-low-noise Class A microphone preamp
Best-in-class conversion and superior analog design
USB-C bus powered
108 dB dynamic range
Includes control software
High definition 24-bit/192kHz audio

Connections

1 in/3 out (one low-noise Amp Out)
1 ultra-low noise mic in/instrument in
2 balanced monitor outs
Reference headphones out
2 fully configurable external control inputs
MIDI input/output
USB 2.0 compatible with Mac/PC

Unit Width (mm): 160
Unit Height (mm): 52
Unit Depth (mm): 130
Unit Weight (kg): 0.37
Read more
MRP:$147.39 SAVE 30%
 1 in stock $103.39
RME FireFace UFX III 188-Channel USB 3.0 MADI Interface
Cat: 934392 Rel: 21 Apr 23
 
188-channel USB 3.0 MADI interface.
Notes: Ultra-high-quality audio interface with unbeatable versatility. Up to 94 channels I/O, 64 MADI channels, DSP and extensive digital options including two optical ADAT I/Os.

*** Complimentary warranty on this product for 5 years if purchased from Juno- UK warranty only***

Supplier's Notes:
RME Fireface UFX III: The Flagship Multi-channel Interface

The Fireface UFX III is a powerful all-in-one solution for modern recording studios, live audio playback systems and multi-channel location recording rigs, handling up to 188 channels (94 Inputs / 94 Outputs) with ease.

Unprecedented flexibility and compatibility combines with RME's famous low latency hardware and driver designs, guaranteeing flawless operation for any multi-channel recording application, whilst the inclusion of DURec (Direct USB Recording) provides extensive options for backup recordings and stand-alone operation.

The ultimate professional tool for multi-track recording, mixing and mastering, the RME Fireface UFX III is packed with professional features including:

USB 3.0 (full 94 channel I/O Class Compliant; USB-C compatible)
SteadyClock FS
Powerful integrated DSP
TotalMix FX
TotalMix Remote
DURec (Direct USB Recording)
MADI I/O (64 channels)
And support for the Advanced Remote Control USB (sold separately)

Powerful USB 3 Performance

The front panel of the Fireface UFX III provides four high-performance XLR/TRS combo inputs for microphone, instrument and line signals, two stereo headphone jacks with +19 dBu output level, MIDI I/O, and a USB port.

In combination with the DURec function (Direct USB Recording), the USB port allows independent recording of selected input and output signals (up to 80 channels) to a connected USB storage medium.

The rear panel reveals the full connectivity of the Fireface UFX III. Besides another MIDI I/O, the two optical ADAT I/Os, an AES/EBU I/O, and eight balanced analogue outputs with line level (including XLR stereo monitor outputs) are available.

With the new Multi-Mode, the two ADAT I/Os can be used as separate optical SPDIF inputs and outputs in addition to the AES I/O. Furthermore, the Fireface UFX III offers an optical MADI interface (SC) with 64 bidirectional channels. The Word Clock connectors (BNC) work as additional coaxial MADI input and output if required.

Comprehensive MADI Connectivity

The Fireface UFX III opens the doors to a host of RME and 3rd party digital and analogue I/O solutions.

Expanding your analogue channel count, the ability to route/mix within the digital domain through numerous sources presents many flexible options. Multiple external MADI devices can also be connected in series.

To further enhance MADI flexibility, the Fireface UFX III boasts some typical RME-style features. For example in USB 2 mode, which is limited to 30 channels I/O (12 analogue plus 16 ADAT plus AES), the MADI I/O is still available via RME's integrated hardware mixer TotalMix FX.

Word Clock I/O (BNC) can be switched to MADI I/O (coaxial), and a special split mode even supports the use of both MADI I/Os simultaneously, with 32 channel each on optical and coaxial.

SteadyClock FS - FemtoSecond Clocking Technology

The RME Fireface UFX III also features RME's latest digital clocking and jitter rejection technology, 'SteadyClock FS'.

Originally developed for RME's award-winning ADI-2 Pro FS range of high-end converters, SteadyClock FS reduces intrinsic jitter to a new all-time low, when converting to and from analogue over all digital formats.

All clock modes provide excellent performance and astonishingly high-quality analogue conversion, allowing you to hear your mix exactly as it is.

What's more, RME's digital format conversion occurs without any loss to the signal, and SteadyClock FS ensures your sonic image will never experience any kind of degradation, ensuring the soundstage is replicated to the fullest depth and clarity.

Powerful Applications for Mixing, Monitoring and Measurement included

The Fireface UFX III comes with the TotalMix FX DSP mixer, offering comprehensive routing and monitoring options for all analogue and digital audio channels, as well as the DIGICheck Analyzer, which allows users to measure and analyze digital audio data feeds (in both directions) with maximum precision.

TotalMix FX can completely replace an external mixer, enabling the creation of multiple latency-free monitor mixes with EQ, Dynamics, Reverb and Delay for any outputs, including main monitors, submixes, and headphone mixes for musicians.

A free companion app, TotalMix Remote is a network-controllable remote for TotalMix FX, enabling control over interface's hardware mixer and effects from another Mac, PC or iPad, including wirelessly over Wi-Fi.

TotalMix Remote mirrors the current state of the host system on the iPad and Windows/Mac computers - the entire mixing state, the complete routing, all FX settings, up to the level meters, and everything in real time.

DC-Coupled Outputs - CV/Gate Voltage Control

Most audio interfaces are traditionally designed with what is called 'AC-coupled outputs', where capacitors are used to filter out any extreme low frequencies.

Whilst these frequencies are generally considered undesirable for audio - eating into headroom and potentially causing damage to other equipment - one instance where DC-coupling remains desirable is the world of modular synthesizers, where static or slow-moving signals are used for control over various parameters such as pitch note values or LFOs.

All of the Fireface UFX III's line-level outputs are fully DC-coupled, allowing for the sending of control voltages (CV) or Gate information to modular synthesizers (such as the popular Eurorack and Moog/MOTM/Synthesizers formats) and other studio hardware.

USB 3 Class Compliant Audio

The Fireface UFX III operates in two different modes: driver-based and Class Compliant.

Class Compliant mode is a standard that is natively supported by operating systems like Windows, Mac OSX and Linux distributions, allowing for Plug 'n' Play operation of the Fireface UFX III. No proprietary drivers are required, the device will be directly recognised when the CC firmware is loaded.

The Fireface UFX III is RME's first audio interface with full USB 3.0 support in Class Compliant Mode. This makes all channels available in driverless operation for Linux, Mac and iPadOS.

An iPad Pro with USB-C can manage up to 94 channels for recording and playback in TotalMix FX for iPad and on system level.

ARC USB Remote Control (sold separately)

The ARC USB is an optional remote control for the Fireface UFX III, along with all other RME devices that use TotalMix FX.

15 user-assignable illuminated buttons, one encoder wheel, and a TS jack (for connecting a foot switch) provide access to all of the most used functions of TotalMix FX.

The ARC USB can be connected directly to the Fireface UFX III via the second USB port on the back of the interface, or directly to a USB port on a Mac or PC.

Operating as a UAC 1 class device, the RME ARC USB is natively compatible with Windows and Mac OS X. As soon as it is present in the operating system, TotaIMix FX will automatically detect the ARC USB, and communicate with it via simple MIDI remote commands to control the UFX III.

DURec (Direct USB Recording)

DURec is an integrated digital recorder for all inputs and outputs directly to USB memory devices via the front USB port. The Fireface UFX III records on USB thumb drives or hard drives with up to 2 TB capacity.

The recording functionality is provided by the internal DSP, and is therefore independent from a connected Windows or Mac computer. The Direct USB Recording converts the Fireface UFX Series both into a stand-alone field recorder and a powerful multichannel live player for previous recordings, e. g. for virtual sound checks.

Live concerts, band rehearsals or spontaneous jam sessions can be directly recorded and played back from the medium - even completely stand-alone without computer or software.

General Specifications

Power supply: Internal switching PSU, 100 - 240 V AC, 36 Watts
Idle power consumption: 19 Watts
Typical power consumption: 22-25 Watts
Dimensions including rack ears (WxHxD): 483 x 44 x 210 mm (19" x 1.73" x 8.5")
Dimensions without rack ears (WxHxD): 440 x 44 x 210 mm (17.3" x 1.73" x 8.3")
Total depth: 240 mm (9.4")
Weight: 3 kg ( 6.6 lbs)
Temperature range: +5- up to +50- Celsius (41- F up to 122-F)
Relative humidity: < 75%, non condensing

Included Accessories:

Cable USB 3.0, 1.8 m (6 ft), USB-A/B
Cable USB 3.0, 1.8 m (6 ft), USB-C/B
Optical cable
4 rubber feet, self-adhesive
Power cable
Printed Manual
Read more
MRP:$2,737.15 SAVE 11%
 1 in stock $2,440.28
myVolts Beatsplitter Dual Output Switchable Signal Splitter Audio Interface (black)
Cat: 924225 Rel: 30 Mar 23
 
Dual output switchable signal splitter audio interface.
Notes: The Beatsplitter is a single to dual stereo splitter with switchable channels.

It can duplicate outputs, but it can also merge inputs. Which signals appear on each channel is determined by how a small switch is set on the side of the unit.

On the Left channel, in can be set to Stereo, LL (Left, Left) and Mono. On the Right channel, it can be set to Stereo, RR (Right Right) and Mono.

In output mode, the stereo cable plugged into the unit has a Left and Right signal. If the output is set to LL, then the Left channel signal from the input is duplicated to both Left and Right sides of one output, creating a false stereo. The same can be achieved with the Right input signal, by setting the Right sided output to RR.

In input mode, the Left channels from ach of the two inputs are merged onto the Left channel of the output when switched to LL. The same happens for the Right channels when switched to RR.

What does the Beat Splitter do?

The Beat Splitter allows you to manage the signals to your desired outcome. In practical terms, it solves channel mis-match problems, for example, did you ever want to...

Share an output of your jam with a second person with headphones? Whether you want to share the output of a player, or a mini-synth like a PO, or duplicate the output of your summing mixer, this very easily achieved.

Have a second output to record any of the above on a recorder, or even bluetooth send it to a camera or phone. The convenience of being able to "get in" at any point in your setup means greater flexibility when recording.

But I can do those things with a standard splitter cable, is there anything else it can do?

Get a true stereo output to two independent speakers. For example, if you wished to take a laptop audio output and send L and R channel independently to a Left and Right speaker, true separation is achieved. You can send a LL to one speaker and RR to the other. This will be far better than a stereo splitter cable, which will give you a LR on both speakers, or a stereo to mono cable, which will give you a L Mono and R Mono on each speaker.

Create a stereo effect when you want it. There are numerous situations where audio will end up only on one side of your headphones, or worse, one side of your mix in recording. These include, when your guitar, or violin pick-up only outputs Mono, or when you run your keyboard through a Mono effects pedal. Using the LL output, you can "stereo-fy" your Mono output, by creating a false stereo duplication of the channel.

Allow yourself to easily record on two channels with one input. If you wanted to record an interview, but have only a single input stereo recorder, Beat Splitter makes it possible to record the two voices independently. For example, a smartphone with audio input jack could have the beatsplitter attached, then a mic could be plugged in to each of the two inputs, set to LL and RR, the phone would record person A on L channel and person B on R channel. This would obviously work with any two channel recording requirement, with synths, guitar and voice, etc.

Avoid Sync "hammer" in your mix. A lot of small synths have intelligent systems for clock control, usually existing on the Left side of your stereo connection. Avoiding this in your mix is possible with the Beat Splitter. For example, using a Pocket Operator as sync master to control a Korg Volca slave. One Beat Splitter channel has output audio, the other outputs sync. This can be also be achieved with a stereo to dual mono cable, but if you do, you will most likely end of with your PO audio on one channel, as in the point above.

For desktop synths, manage audio independently from sync to avoid distortion from multiple pass-throughs and allow recording on independent tracks. The suggested method for connecting a number of Pocket Operators, is to run them in a train, each passing sync and audio on to each other. Each pass-through requires the adding of gain, which can provide significant noise and distortion as it passes through multiple amplifications. This also removes the possibility of individual volume control per PO and the recording of the POs outputs as individual tracks. With Beat Splitter, all these limitations and difficulties are removed.

Can TAPS be combined?

Yes, they can be combined, they are also stack-able, you can plug a Beat Splitter into a PO, then plug a PnP into one of its outputs. These configurations solve other problems, such as...

Wet/Dry effects on your tabletop. If you want to duplicate your audio output from a device (with Beat Splitter), then you can run a cable through an effects unit (e.g. Korg Monotron), put a PnP on its output and you get a Wet/Dry version of the effect by turning the pot in Volume mode.

You can A/B test two sources of of a input to a mix. Just set up like point 5 above, then use a PnP to pan between the two inputs.
Read more
 1 in stock $11.47
RME Digiface Ravenna 256-Channel Bus-Powered USB 3 Ravenna Interface
Cat: 920655 Rel: 06 Mar 23
 
256-channel bus-powered USB 3 Ravenna interface.
Notes: Based on the Digiface Dante but with the added benefit of low-latency Ravenna audio-over-IP, the Digiface Ravenna offers 128 Ravenna channels and 64 MADI channels.

*** Complimentary warranty on this product for 5 years if purchased from Juno- UK warranty only***

Supplier's Notes:
The Digiface Ravenna is a lightweight, portable audio interface, based on the proven Digiface Dante equipped with a RAVENNA module developed by DirectOut and features with everything that RME is famous for: USB 3, MADI, TotalMix FX and outstanding options in both USB and stand-alone operation.

Mobile RAVENNA Solution via USB

The combination of RME's renowned drivers (Mac/Windows) and DirectOut's RAVENNA implementation offer a reliable and flexible networked computer audio interface. Equipped with the latest TotalMix FX it can not only route, but also mix as many independent submixes as outputs are available. The included high quality phones output offers a quick listen to any audio channel, but can also be used as line output to provide an additional analog stereo mixdown.

RAVENNA & MADI

RME made the two BNC sockets for word clock I/O switchable to MADI I/O, with up to 64 channels. The total sum of Ravenna and MADI, 128 channels, are transferred via USB 3.0 and handled via the included RAVENNA web server or RME's TotalMix FX, for full and struggle-free control of all audio.

On the network side, the interface features a full-fledged RAVENNA stack with AES67 and ST2110-30/31 support and redundant audio-over-IP streaming as per ST2022-7. In addition, the interface can also be used as a mobile 64-channel RAVENNA/MADI converter without a USB connection to a computer. The coaxial MADI I/O connectors may also be configured to work as word clock sync I/O.

TotalMix FX and TotalMix Remote

Like all the latest RME interfaces, the Digiface Series also includes the powerful digital real-time mixer TotalMix FX. It allows for practically unlimited mixing and routing operations, with all inputs and playback channels simultaneously, to any hardware outputs.

The Digiface Series includes a dedicated Control Room section with Talkback, Main/Phones, fader groups, mute groups, complete remote controllability via Mackie or OSC protocol, and much more. The Digiface Series does not support DSP based effects (FX) like EQ or reverb.

Additionally RME's latest software, TotalMix Remote, enhances the power of RME interfaces by enabling remote control via iOS, PC or Mac. With a straightforward set up process - simply enter the IP address of the computer you would like to control with TotalMix Remote and get going - users can quickly adjust any aspect of TotalMix FX on a host system while walking around the studio with their tablet, or from a control room located elsewhere in the facility.

TotalMix FX - Mixing/Routing with superior features for Studio and Live Work

Since 2001 TotalMix added unlimited routing and mixing to RME's audio interfaces. Its unique capability to create as many independent submixes as output channels available turned it into the most flexible and powerful mixer of its kind.

RME USB - Transport audio with lowest latency and industry leading stability

Use your RME audio interface on Mac and PC with reliable, stable, and regularly updated drivers for RME products. RME Audio develops its own interface core, it's not dependent on 3rd parties for upgrades, modifications or bug fixes, so customers can use latest operating systems without interruption or delay."

DigiCheck - The Secret Weapon of High Resolution Audio Measurements

RME Audio interfaces not only provide you with a professional digital audio interface, but also with a free available software tool: DigiCheck, for metering, testing, measuring and analyzing digital audio streams.

Specs

Digiface Ravenna
Gigabit Ethernet Port

RJ45

100 Mbit/s, 1 Gbit/s
Standard port LEDs: yellow connected, green data transmission
Supports straight and crossover cables (Auto MDI-X)
Network-based remote control of the unit (TotalMix Remote)

RAVENNA Modul

Supports RAVENNA, AES67, ST 2110-30 / -31, ST 2022-7
Network Layer 3
Modes: Switched and Redundancy according to ST 2022-7
32 streams
128 channels Single Speed, 64 channels Double Speed, 32 channels Quad Speed
Clock sources: PTP, Internal
Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz, +/-12.5 %
Routing: Channel-based routing matrix
Configuration: Browser GUI, globcon control, NMOS IS-04 / IS-05

MADI Input

Coaxial via BNC, 75 Ohm, according to AES10-1991
High-sensitivity input stage (< 0.2 Vpp)
Accepts 56 channel and 64 channel mode, plus 96k Frame
Standard: up to 64 channels 24 bit 48 kHz
S/MUX: up to 32 channels 24 bit 96 kHz
S/MUX4: up to 16 channels 24 bit 192 kHz
Lock range: 25 kHz - 54 kHz

MADI Output

Coaxial via BNC, 75 Ohm, according to AES10-1991
Output voltage 400 mVpp
Cable length: up to 50 m
Generates 56 channel and 64 channel mode, plus 96k Frame
Standard: up to 64 channels 24 bit 48 kHz
S/MUX / 96k Frame: up to 32 channels 24 bit 96 kHz
S/MUX4: up to 16 channels 24 bit 192 kHz

Output Analog Phones 129/130

Dynamic range (DR): 110 dB RMS unweighted, 113 dBA
Frequency response @ 44.1 kHz, -0.5 dB: 0 Hz - 20.8 kHz
Frequency response @ 96 kHz, -0.5 dB: 0 Hz - 45 kHz
Frequency response @ 192 kHz, -1 dB: 0 Hz - 89 kHz
THD @ -1 dBFS: - 96 dB, 0.0016 %
THD+N @ -1 dBFS: -95 dB, 0.0017 %
Channel separation: > 100 dB
Output: 6.3 mm TRS jack, unbalanced
Output impedance: 2 Ohm
Output level at 0 dBFS, 1 kOhm load: +9.5 dBu
Max power @ 0.1% THD: 50 mW

Word Clock In

BNC, not terminated (10 kOhm)
Switchable internal termination 75 Ohm
Automatic Double/Quad Speed detection and conversion to Single Speed

Word Clock Out

BNC
Max level: 5 Vss
Level with termination 75 Ohm: 4.0 Vss
Internal impedance: 10 Ohm
Output Analog Phones 129/130
Dynamic range (DR): 110 dB RMS unweighted, 113 dBA
Frequency response @ 44.1 kHz, -0.5 dB: 0 Hz - 20.8 kHz
Frequency response @ 96 kHz, -0.5 dB: 0 Hz - 45 kHz
Frequency response @ 192 kHz, -1 dB: 0 Hz - 89 kHz
THD@-1dBFS:-96dB,0.0016%
THD+N @ -1 dBFS: -95 dB, 0.0017 %
Channel separation: > 100 dB
Output: 6.3 mm TRS jack, unbalanced
Output impedance: 2 Ohm
Output level at 0 dBFS, 1 kOhm load: +9.5 dBu
Max power @ 0.1% THD: 50 mW

Digital

Clocks: Internal, RAVENNA (PTP), word, MADI
Supported sample rates: 44.1 kHz up to 192 kHz
Read more
MRP:$2,031.81 SAVE 11%
 1 in stock $1,799.41
M Audio M Track 2X2 Vocal Studio Pro Complete Recording Package (B-STOCK)
Cat: 926356 Rel: 01 Jan 90
 
B-STOCK: Original box damaged, product is in different packaging but in perfect working order
Notes: ***B-STOCK: Original box damaged, product is in different packaging but in perfect working order***


Enter the world of studio-based recording with the M-Track 2X2 Vocal Studio Pro - the ultimate all-in-one solution for computer recording projects. Combining the critically acclaimed M-Track 2X2 interface, HDH40 headphones, a Nova Black condenser microphone, XLR cable and the premium C-Series Software Suite, laying down vocal tracks, recording electric and acoustic instruments and adding voice-overs to multimedia projects has never been easier. With the M-Track 2X2 Vocal Studio Pro, the combination of high-performance hardware and easy-to-use software results in pro-grade audio capture for every recording scenario.

More Than Just An Interface:
This is the creative centre of your recording setup: simple-to-use, style-infused M-Track 2X2 C-Series audio interface is the perfect tool to record and produce natural-sounding 24-bit/192kHz studio-quality recordings. Combining one XLR+ 1/4" balanced combo input and an all-new dedicated 1/4" instrument input, the M-Track C-Series 2X2 enables you to record two channels simultaneously. The versatility of a combo input accommodates any source audio with a microphone or line-level output while a tailor-made gain and impedance stage on the conveniently located instrument input guarantees a clean, accurate guitar or bass DI signal.

Fusing an elegant pro-grade metal chassis, USB & USC-C connection cables, all-new transparent low-noise Crystal pre-amps and pristine A/D converters that deliver the highest audio performance in their class, the M-Track 2X2 provides all the tools you need to capture that initial idea and transform it into a finished masterpiece with ease. Take your music to the next level and start recording now!

Professional Recording - Done:
Studio-grade recording demands the right tools for the job. M-Audio's Nova Black large-diaphragm condenser microphone is perfect for podcasting applications or capturing high-quality audio from vocalists, instruments, percussion and more

At the heart of the Nova Black microphone is an 18mm pure aluminium condenser capsule with a directional cardioid polar pattern. This delivers wide range frequency response (20 - 20kHz), high sensitivity (-38dB, 0dB = 1V/Pa @ 1kHz) and accurate transient response, resulting in a microphone that captures even the most subtle nuances with ease, with minimal interference from unwanted ambient noise.

With the Nova Black condenser microphone, complicated setups are a thing of the past. Thanks to an included windscreen, a purpose-designed shock-mount for mounting to a traditional mic stand and an XLR cable, everything you need to get connected and start recording is included.

Hear Every Detail:
Professional recording demands uncompromised accuracy when it comes to monitoring. M-Audio's HDH40 headphones combine premium transducer elements with a durable, rugged design to deliver superb sound reproduction and the outstanding acoustic isolation required in professional recording and monitoring environments. Long sessions are no problem! The plush padding reduces fatigue during extended use, and the over-the-ear design ensures that the HDH40 stays secured while you're wearing them. With the HDH40, you can concentrate on what's important - your production!

Included Software:
- AIR Creative FX Collection (20 world-class FX AU/VST plugins as made famous by Pro Tools)
- AIR Strike
- AIR Xpand! 2
- AIR Mini Grand
- Steinberg Cubase LE

***UPDATED SOFTWARE COMPATIBILITY***

Pro Tools First and Eleven Lite software are now included with the current line-up of M-Audio keyboards and interfaces - for all existing and new customers! The industry-standard Pro Tools music software bundle and the Eleven Lite plugin gives artists unprecedented creative options with the most realistic virtual instruments/effects anywhere.

***NOW INCLUDES 2GB SOUND LIBRARY OF IN-DEMAND SOUND CONTENT FROM TOUCH LOOPS***
Read more
 3 in stock $119.80
ESI M8U eX 16-Port USB 3.0 MIDI Interface With USB Hub
Cat: 895983 Rel: 02 Feb 23
 
16 professional MIDI ports, USB 3.0, automatic I/O and more
Notes: The stylish and very powerful M8U eX is a modern USB 3.0 MIDI interface with a total of 16 MIDI ports in one single device.

Featuring the popular MIDI auto detection technology that was pioneered by ESI, each of these 16 ports can either be used as a MIDI input or as a MIDI output, replacing not only regular MIDI interfaces like our previous popular legacy multi port MIDI interfaces with 8 inputs and 8 outputs, but providing also other possible configurations: for instance, you can use up to 16 outputs at a time or up to 16 inputs, or any other combination, like 12 outputs and 4 inputs. Each automatic input / output configuration is displayed via colored LEDs on the front panel.

If the number of ports is not enough, you can hook up multiple M8U eX to the same computer - a feature that is made easy also via the integrated fast USB 3.0 hub that allows you to connect other USB equipment like software dongles or USB keyboards and others to your computer. This literally turns M8U eX into the central hub for the MIDI and USB devices in your studio or live performance setup.

The 100% fully class compliant device can even be bus powered (or if needed for other USB devices, it is powered via the included 5V DC power supply) and it works out of the box without the installation of additional drivers on Windows 7, Windows 8.1, Windows 10, Windows 11 and macOS systems (both 32-bit and 64-bit). Yet, there is more: it also works as a standalone Thru and Merge solution for your MIDI devices. Selected via a push button on the front panel, M8U eX provides various configurations allowing you to merge multiple MIDI signals and send them out to a single port or to send out signals through multiple ports that are coming in from just one - all based on your individual needs.

All this makes our M8U eX easily the most powerful USB MIDI interface existing on the market today.

If 16 ports are more than what you need, there is also the smaller M4U eX available, with 8 ports.

Features/specifications

USB 3.0 MIDI interface
100% class compliant, works without the installation of a driver
USB bus powered
16 MIDI ports, 8 on the front and 8 on the back
Automatic input and output detection, each port works as a MIDI input or MIDI output
Standalone operation possible
Can be used as MIDI Thru box in standalone mode to send one MIDI signal to 15 outputs
Can be used as MIDI merger in standalone mode to merge 15 MIDI signals to a single output
3-port USB 3.0 hub with external 5V DC power supply to power USB devices (power supply included)
Multiple units can be used with one computer at a time
Downwards compatible to USB 2.0 with a USB 2.0 legacy mode
Optional ESI MIDI Port driver for multi device / multi client operation under Windows available
Dimensions roughly 32.5cm x 14.5cm x 4.5cm
Read more
 2 in stock $184.23
Click for better price!
or call +44 20 7424 1960
quote 895983
Citronic USB Audio Interface: 2 Microphone + 1 Instrument (black)
Cat: 922286 Rel: 19 Jan 23
 
Desktop USB soundcard for a computer-based recording studio.
Notes: Desktop USB soundcard for a computer-based recording studio. Featuring 2 independent microphone inputs on XLR/jack sockets and a separate 6.3mm instrument input. Each input has a gain control and there is an optional echo effect with separate control. Monitoring is via a stereo 6.3mm headphone jack or L+R RCA line output on the rear of the unit for connecting monitor speakers. Power to the interface and two-way digital audio is connected via a USB type-C socket at the rear. Simple yet versatile operation for project studios and DAW recording setups.

Power supply: 5Vdc (from USB)
Connection: USB type-C
Controls: Mic1, Mic2, Inst3, Effect, Monitor
Input connections: 2 x mic XLR/Jack, 1 x 6.3mm instrument jack
Phantom power: +48V switchable to XLR inputs
Frequency response: 10Hz - 30kHz (-0.5dB)
Input impedance: instrument1M Ohm
Input impedance: mic3k Ohm
Max. input sound level: Mic or Instrument +2dBu, Line +22dBu
Dynamic range: 100dB (A-weighted)
Sampling format: 48kHz, 16-bit
Monitor outputs: Headphones (stereo 6.3mm jack), Line out (L+R RCA)
Dimensions: 160 x 110 x 57mm
Weight: 529g

In the box

The box for this item contains:

USB2+1 Audio Interface
1.5m USB C to A lead
Read more
MRP:$72.64 SAVE 30%
 1 in stock $50.80
Click for better price!
or call +44 20 7424 1960
quote 922286
Solid State Logic SSL 12 12-In/8-Out USB & MIDI Audio Interface
Cat: 912626 Rel: 01 Dec 22
 
The perfect audio interface for producers and engineers who demand uncompromising performance and versatility from a desktop device.
Notes: An affordable taste of the legendary Solid State Logic sound, an iconic name in high-end recording consoles. The SSL 12 offers four analogue inputs and four analogue outputs plus eight-channel ADAT digital expansion and two stereo headphone outs which can also be used as line outs.

Supplier notes:
Class-leading performance, in the studio and on the road

The Solid State Logic SSL 12 is the perfect audio interface for producers and engineers who demand uncompromising performance and versatility from a desktop device. SSL 12 is capable of being both a studio centrepiece and a portable production hub to take with you on the road. Four SSL-designed mic pre-amps with uncompromising low-noise and high gain performance, Legacy 4K analogue enhancement for adding that signature SSL colour, class-leading dynamic range from premium-quality converters, comprehensive monitoring section, ADAT expandability, talkback mic, flexible headphone outputs and an intuitive console-style software mixer. SSL 12 just set a new bar for what you can expect from a unit that is entirely USB-powered.

Big studio features, small desktop footprint

SSL 12 is loaded with an extraordinary amount of professional studio features normally reserved for high-end rackmount interfaces. For tracking, the ADAT connectivity, together with the on-board talkback mic and an incredibly powerful cue mixer (that allows you to create up to 4 independent near-zero latency performer mixes) will handle the most demanding of recording sessions. For mixing, alternative monitor switching and assignable front panel control room functions puts everything you need at your fingertips. For production, USB Loopback, MIDI I/O and DC-coupled outputs for CV control of synths and FX equip you with a serious toolkit to keep the creativity flowing. To top it all off, the ever-expanding SSL Production Pack (packed with a selection of must-have virtual instruments, plug-ins, samples and DAWs) helps to bring your productions to life.

SSL Studio Quality and Know-How

For over 50 years, SSL have been designing cutting-edge mixing consoles and hardware processors, as used by the world's most recognised artists and recording studios. Over that time, their reputation as a world-leading manufacturer of professional audio equipment has centred around a constant pursuit of audio excellence and technical innovation, accomplished through streamlining production workflows and advanced studio ergonomics. SSL 12 takes the 'traditional' desktop audio interface where it's never been before with an incredible array of features in a compact footprint that delivers outstanding audio quality. Featuring the familiar Alps pots, Neutrik connectors and an attractive brushed aluminium front panel, SSL 12 is built to last whether you're using it in the studio or on location.

Real Analogue Enhancement Inspired By The SSL 4000-Series (4K) Console

SSL has a history of innovation in analogue electronics and console design. Whether it be the sound of the classic '242' and '292' EQ circuits, the punch of the legendary SSL Bus Compressor or the incredible bandwidth and sonic accuracy of the ground-breaking SuperAnalogue designed mic amps and consoles, SSL are always moving forward with analogue. Legacy 4K is an all-analogue enhancement effect, inspired by the character of an SSL 4000-series console (often referred to as '4K'). It distils two essential characteristics of the 4K sound into a single circuit. The first thing engaging the Legacy 4K circuit will do is to introduce a forward, yet musical sounding high frequency EQ boost, helping to add some excitement to your vocal or instrument. Secondly, it'll add some subtle analogue distortion with finely tuned harmonic content, helping bolster any sound with more edge and personality.
Read more
MRP:$421.10 SAVE 10%
 1 in stock $381.09
Arturia MiniFuse 4 4x4 USB Audio & MIDI Interface (white)
Cat: 906594 Rel: 25 Nov 22
 
4-in/4-out audio & MIDI interface
Notes: MiniFuse 4 is a next-gen 4in/4out audio & MIDI interface designed to transform your ideas into your art. Capture crystal-clear recordings, refine with pro-grade creative software, and get your sound out there.

The best software included

MiniFuse 4 comes with an exclusive selection of software titles offering everything you need to give your sound the professional edge. This isn't a bundle of fremium plugins or demos - this is the same exceptional software used by music and audio professionals worldwide.

Ableton Live Lite Compose, record, perform, and produce anything with an introduction to one of the most widely-used musical software titles in the business - yours with MiniFuse.

Analog Lab Intro Instantly add inspiring sounds from our award-winning keyboard emulations to your mix with hundreds of presets to explore, from vintage '80s synths to fat modern sounds.

Arturia FX
Colour your sound with 4 premium FX plugin recreations of studio classics; a lush plate reverb, a gritty analogue preamp, a classic tape echo, and a rich stereo chorus.

Auto-Tune Unlimited™ 3-months free subscription Refine your vocal parts for perfect harmony or go full trap-style autotune with a 3-month subscription to the industry's favourite voice tuning plugin.

Native Instruments GUITAR RIG 6 LE An inspiring selection of amps, cabs, delays, reverbs, stompboxes and compressors, so you can build your own processing chains and customize your perfect guitar tones. Splice Creator Plan 3-months free subscription Access millions of hi-def royalty-free samples, from lo-fi drum loops to punchy vocal one-shots, as well as synth sounds, Splice Skills tutorials, and much more.

MiniFuse 4 is built by audio creators, for audio creators. Expertly engineered to tick every box for whatever sound you want to make, this is one interface you can count on in every situation.

Creativity connected Your MiniFuse 4 is designed to be the hub of your sound setup. Connect up to 4 input sources at once with 2 combo inputs and 2 jack inputs; send, receive, and sync MIDI information with 5-pin DIN connections; connect extra USB devices like controllers or external drives with the USB hub socket; all connected via universal USB-C connectivity.

Simply the best sound For audiophiles, MiniFuse 4 delivers a 110db dynamic range and a class-leading equivalent input noise of -129dB. For everyone else, that means unbelievable sound quality that can compete with leading studios. Get the dynamics, clarity, and impact that your sound deserves.

Tough, portable design MiniFuse 4 is a desktop interface, but we know that inspiration can strike at any time. A compact and lightweight design with a rugged aluminium casing means you can take your sound with you - perfect for those last-minute sessions, quick deadlines, and spontaneous musical moments.

Fully operational

Whether you're using a laptop or desktop, MiniFuse can work for you. PC or Mac, connect it and enjoy total recording freedom. To keep things organized, the free MiniFuse Control Centre app lets you control its inputs, outputs, settings, and firmware updates in one place.

Who is it for?

For the musician Whether you're recording your band, your friends, or yourself, MiniFuse 4 can capture up to 4 instruments simultaneously with beautifully transparent low-latency sound.

For the producer The perfect companion for making beats, tweaking your final mix, or laying down ideas thanks to easy connectivity and a bundle of the finest creative software out there.

For the singer-songwriter Track your vocal ideas, capture your new favorite chord sequence, or nail that single-take intimate vibe with multiple inputs and plug-and-play recording.

For the podcaster MiniFuse pairs with up to 4 inputs of your choosing for ultra-clear voice recordings, captivating storytelling, and in-depth roundtable debates - make yourself heard.

For the content creator Easily capture voiceovers alongside in-app or in-game audio with MiniFuse's Loopback function, tailor-made for tutorials, unboxing videos, and game playthroughs.
Read more
MRP:$205.29 SAVE 13%
 2 in stock $178.96
Rode Ai-1 1-In/2-Out USB Audio Interface (black)
Cat: 911050 Rel: 24 Nov 22
 
Ai-1single channel audio interface with combo XLR/instrument input, high quality headphone amp and balanced 1/4" outputs.
Notes: The AI-1 is a professional-grade single-channel audio interface that delivers exceptional audio quality for everything from bedroom music recording to livestreaming and podcasting. Featuring a studio-grade preamp, a high-quality Neutrik™ combo jack for connecting microphones or instruments, and a high-power headphone amplifier for crystal-clear audio monitoring and playback, it's the perfect interface for recording studio-quality audio at home.

Key Features:

Professional-grade single-channel audio interface
Neutrik combo jack for connecting microphones, guitars, synthesisers and other instruments
Studio-grade preamp with level indicator
High-power headphone amplifier

Studio-quality Sound With Ease

With a single input and streamlined controls, the AI-1 is incredibly simple to use - just connect it to your computer, plug in your microphone or instrument, and hit record. Under the hood, the AI-1 packs plenty of punch, including an ultra-low-noise, high-gain studio-grade preamp for recording pristine audio, balanced 14-inch outputs for connecting your favourite speakers, and a high-power headphone amplifier capable of driving professional high-impedance models for flawless monitoring.

Get Connected and Create

The AI-1 features a high-quality Neutrik combo jack for connecting both XLR and 14-inch cables, so you can plug in your microphone, guitar, bass, or synthesiser with ease. Switchable phantom power ensures any microphone is accommodated, while the simple indicator LED allows you to monitor your input level for crystal-clear audio every time. Every AI-1 also comes with a free version of Ableton Lite, so you can get recording right away. Whether you're livestreaming or making multi-layered music, the AI-1 will capture your sonic vision in every detail.

RODE Central

RODE Central is an easy-to-use companion app for the AI-1 (and other RODE devices) that allows you to access device information and update to the latest firmware. The latest firmware version adds an extended gain range for enhanced performance with low-output dynamic microphones. To update, download RODE Central below and follow the prompts.

Note: OS Requirements - MacOS 10.13 or later; Windows 10 Version 1803 or later; iOS 14 or later; Android 9.0 or later.

Specifications

Acoustic & Electrical Specifications
Gain Range: 60dB (with firmware version 1.3.1)
Bit Depth: 24-Bit
Sample Rates: 44.1kHz 48kHz 88.2kHz 96kHz
48V Phantom Power: Yes
Simultaneous I/O: 1 x 2
Number of Preamps: 1
Direct Monitor: Yes
Bus Powered: Yes
OS Requirements: Mac OS10.10 or later Windows 7 or later
Power: USB bus-powered

Mechanical Specifications
Form Factor: Desktop
Analogue Inputs: 1 x Neutrik XLR-1/4" combo
Analogue Outputs
2 x 1/4" speaker outputs (impedance balanced) 1 x 1/4" headphone output
USB Connectors: 1 x USB-C
Depth: 100mm total (with knobs), Chassis: 88mm
Width: 124mm
Height: 38mm
Weight: 1lb/3.7oz/560g
Warranty: 1 year (extending to 2 years after product registration)

Box Contains:

1 x AI-1
1 x USB-C to USB-A Cable
Read more
 1 in stock $121.86
MOTU M6 6-In/4-Out USB-C Audio Interface
Cat: 909462 Rel: 08 Nov 22
 
6-in/4-out USB-C Audio Interface
Notes: Professional-standard 6-in/4-out interface from the trusted team at MOTU. Pristine sound courtesy of the high-end ESS Sabre32 Ultra DAC, with the versatility of MIDI in/out, dual headphone outputs and A/B monitor control.

Supplier's Notes:
Introducing the M6; Four mic inputs with best in class audio quality, speed, and metering

Audio Quality

Equipped with the same ESS Sabre32 Ultra DAC Technology found in audio interfaces costing thousands, the M6 delivers an astonishing 120 dB Dynamic Range on its main outputs. ESS converters also drive the headphone outputs, which rivals dedicated headphone amplifiers costing hundreds. Ultra-clean preamp circuits produce a measured -129 dBu EIN on the mic inputs. Capture and monitor your audio with pristine clarity.
ESS Sabre32 Ultra DAC Technology for superb analog sound

The same converter technology used in audio interfaces costing thousands

Measured 120 dB dynamic range on outputs

Measured -129 dBu EIN on mic inputs

ESS-driven headphone outputs

Speed

The M6 provides best-in-class speed for monitoring live inputs (mic, guitar or keyboard) through your computer, thanks to MOTU's expertly engineered USB drivers, which deliver class-leading, ultra-low 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer).

Metering

When recording and mixing, nothing is more critical than achieving optimum levels. The M6 is the only audio interface in its class with a full color LCD featuring clear, detailed level meters for all inputs and outputs. Enjoy professional-level volume control and feedback to get your sound just right.

Loopback

The M6 driver

provides convenient loopback channels to your host computer, so you can easily route computer output back to the computer, where you can mix it with up to four mics (and/or guitars) from the M6 in your host software for live streaming or podcasting. Streaming and podcasting has never been easier and better-sounding!

A/B Monitor Switch

The M6 is the only audio interface in its class to offer A/B monitor switching. Connect two pairs of monitors and quickly check your mixes on each pair with the push of a button.

Stand-alone operation

With the included multi-blade international DC power adapter connected, you can power the M6 when the computer is turned off (or completely disconnected from the M6). This allows you to monitor any live inputs you may have (mics, guitars, keyboards, etc.) without a host computer or iOS device needed.

A tradition of engineering excellence

Decades of award-winning product engineering for hit songs, mega tours, primetime shows and blockbuster movies goes into every MOTU audio interface.

Workstation software, virtual instruments and loops to get you making music right away

Connect the M6 to your Mac or PC and start laying down tracks with the included Performer Lite or Live Lite production software, plus hundreds of loops, one-shots and sounds from industry leaders Big Fish Audio, Lucidsamples and Loopmasters.

Technical Specifications

Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
Mic/line/guitar: 4 x XLR/TRS "combo jack" mic/line/Hi-Z guitar inputs Independent preamp gain, 48V phantom power and monitor switch for each input
Analogue inputs: 2 x 1/4" line in
Analogue outputs: 4 x 1/4" TRS line out (balanced, DC coupled) 2 x 1/4" TRS stereo headphone with independent volume
Computer I/O: 1 x USB-C 2.0 audio class compliant Compatible with USB Type A host (*see power below) USB C-to-C and C-to-A cables included
MIDI I/O 1 x MIDI IN 1 x MIDI OUT 16 MIDI channels to/from computer host
Headphones: 2 x 1/4" TRS stereo headphone with independent volume 1 x 3-4 switch for optional monitoring of Line Out 3-4
Phantom power: 4 x individual +48V
Front panel: 2 x 1/4" TRS headphone output 1 x potentiometer - monitor vol 2 x potentiometer - phone vol 1 x potentiometer - input monitor mix 4 x potentiometer - mic/line/guitar input gain 11 x switches - (4) 48V, (5) MON, (1) A/B and (1) 3-4 160 x 120 pixel full-colored LCD with input and output level meters
Power: Bus-powered through USB* Optional multi-blade international 15V DC power adapter (included) *USB bus power available with USB-C hosts only. For other hosts, use the included DC power adapter. For iOS devices with a Lightning port, an Apple Lightning to USB3 Camera Adapter is required (sold separately).
Dimensions and weight (width x depth x height, enclosure only) 9.21 x 4.75 x 1.8 inches 23.4 x 12.0 x 4.57 cm 2.15 lbs / 0.975 kg


System Requirements

Mac System Requirements
Intel Core i3 Mac or faster (including Apple silicon Macs) 4 GB RAM; 8 GB or more recommended macOS version 10.11 or later (Optional driver requires 10.13 or later) Available USB port A large hard drive (at least 500 GB for recording)

Windows System Requirements:
1 GHz Pentium-based PC compatible or faster 2 GB RAM; 4 GB or more recommended Windows 10 or later (x64 only) Available USB port A large hard drive (at least 500 GB for recording)

Class-Compliant Support:
USB audio class compliant for plug-and-play operation on Mac or iOS (no driver required)

Included Software:
MOTU Performer Lite Ableton Live Lite 11 6 GB of loops and sounds from Big Fish Audio, LucidSamples, Loopmasters and MOTU

Line output:

Connector type: 1/4" TRS, balanced, tip hot, Dynamic range (A-weighted): 120 dB, THD+N (unweighted): -110 dB, Max level: +16 dBu

Line Input:
Connector type: 1/4" TRS, bal/unbal, tip hot, Dynamic range (A-weighted): 115 dB, THD+N (unweighted): -110 dB, Max level: +16 dBu

Mic input:
Connector type: XLR, balanced, pin 2 hot, Dynamic range (A-weighted): 115 dB, THD+N (unweighted): 129 dBu EIN, Max level: +10 dBu (at minimum gain)

Phones
Connector type: 1/4", TRS stereo, Dynamic range (A-weighted): 115 dB, THD+N (unweighted): -110 dB, Max level: +12.5 dBu
Read more
 1 in stock $418.99
Click for better price!
or call +44 20 7424 1960
quote 909462
Citronic X-PAD Portable Audio Interface Device For Podcasting & Recording (black)
Cat: 853738 Rel: 10 Oct 22
 
Fully portable audio interface and microphone processor for on-the-go podcasting and recording sessions.
Notes: X-PAD Portable Audio Device

Fully portable audio interface and microphone processor for on-the-go podcasting and recording sessions. The X-PAD brings professional audio processing to a compact and convenient handheld device, cutting the need for bulky equipment out of the creative process. USB-C connection to a smart phone or laptop computer provides a full audio workstation with duplex recording and playback. Microphone input with phantom power option, digital reverb, pitch change and auto-tune processing. Multiple output connections for playback and monitoring via headphones or active speakers. Preset sound effects and user memory for soundbites and loops. All operation is from an internal Li-ion battery, rechargeable via USB. An indispensable companion for podcasts, singing demos and recording on location.

Specifications:

Power source: 3000mAh Li-ion battery or USB 5Vdc 2A, USBUSB-C (PC/OTG - audio v.1.1) + USB-C (charge)
DSP sample rate: 48kHz, 16-bit (S/N 98dB)
Microphone inputs: 3 x 3.5mm jack (Mic.1, Mic.2, headset)
Input impedance: mic2.2k Ohms (Mic.1), 10k Ohms (Mic.2 & headset mic)
Sensitivity: mic-36dB (Mic.1), -26dB (Mic.2 & headset mic)
Sensitivity: line-2dB
Phantom power: +48V (Mic.1), +5Vdc (Mic.2 & headset mic)
Frequency response: 100Hz-16kHz (mic), 20Hz-20kHz (line in) i1dB
Line input: 3.5mm stereo BGM input
Gain: Line in 12dB max.
Smart phone audio connection: 3.5mm TRRS jack (or via USB-C)
Headphone connector: 3.5mm stereo jack
Headphone: impedance:16-300 Ohms
Headphone power: 100mW @16 Ohms (1kHz)
Dimensions: 162 x 78 x 21mm
Weight: 280g

The box for this item contains:

X-PAD handheld portable audio device
USB-C OTG (on-the-go) lead
XLR to 3.5mm TRS jack microphone lead
3.5mm stereo jack lead
Read more
MRP:$93.69 SAVE 28%
 2 in stock $67.37
Click for better price!
or call +44 20 7424 1960
quote 853738
ESI U22 XT 2x2 24-Bit/96kHz USB 2.0 Audio Interface
Cat: 635315 Rel: 26 Sep 22
 
2-input/2-output 24-bit/96kHz USB 2.0 audio interface
Notes: U22 XT offers a maximum of flexibility as fully bus powered USB device with pristine professional 24-bit audio quality.

The interface features 2 analog input and 2 analog output channels with RCA line inputs, a microphone preamplifier with XLR input and support for +48V phantom power, a Hi-Z instrument input for guitars, a high quality headphone output and TRS line outputs. Master and headphone volume as well as monitoring are controlled on the front panel.

On the software side, U22 XT provides low latency drivers with support for WDM, ASIO 2.0 and CoreAudio based on our EWDM and DirectWIRE technology.

Included with U22 XT is the Bitwig Studio 8-Track software, the trim and effective digital audio workstation to start producing, performing, and designing audio like a pro. With Bitwig Studio 8-Track, you can start working right out of the box without other additional software. Record and arrange, improvise and perform, or do it all at once, with this professional solution developed by musicians, for musicians.

If you're looking for a really powerful USB audio solution for your PC or Mac to start working out of the box, then U22 XT is for you!

U22 XT is also available as a complete recording bundle with a microphone and headphone, the U22 XT cosMik Set.

Features
2 input / 2 output 24-bit / 96kHz USB 2.0 Audio Interface
microphone preamp with +48V phantom power support
Hi-Z instrument input with 1/4" connector
USB bus powered
max. 24bit/96kHz
line input with RCA connectors
line output with balanced 1/4" TRS connectors
headphone output with 1/4" connector
ADC with 102dB(a) dynamic range
DAC with 108dB(a) dynamic range
input / output monitoring controlled on front panel
master volume control on front panel
supports Windows Vista, Windows 7, Windows 8.1, Windows 10 and Windows 11 with ASIO 2.0, MME, WDM and DirectSound incl. DirectWIRE support
supports Mac OS X (10.7 and above) via the native CoreAudio USB audio driver from Apple (no driver install required)
supports many Linux distributions via the ALSA USB audio class support
includes Bitwig Studio 8-Track digital audio workstation software
includes license of inTone 2 ESI Edition from Audified
dimensions roughly 17.5cm x 12.0cm x 4.5cm
Read more
 1 in stock $47.31
ESI MIDIMate eX USB 2.0 MIDI Interface Cable With 2x I/O Ports
Cat: 895980 Rel: 26 Sep 22
 
USB 2.0 MIDI interface cable with 2 I/O ports
Notes: MIDIMATE eX is a convenient USB 2.0 MIDI interface cable with up to 32 input or 32 output channels for PC and Macintosh systems. With MIDIMATE eX you can obtain perfect MIDI timing and performance at an extremly affordable price.

MIDIMATE eX is a simple, stylish and very powerful adapter cable that connects the USB port of your computer to any MIDI Input or MIDI Output labelled connector on an external MIDI device. Two MIDI connectors are provided by MIDIMATE eX and using them with your applications could not be easier. If you connect the MIDI cable to a MIDI Output of an external device, signals will appear via MIDI input in your software. If you connect it to a MIDI Input, you can send signals to the external device via the MIDI playback function of your software. All these functions are provided with perfect MIDI timing and best performance.

Features/specifications

USB MIDI interface with 2 MIDI connectors, each can work as independent input or output
high-speed connection optimized for USB 3.0 and 2.0 port of PC or Mac, downwards compatible to USB 1.1
bus powered, requires no external power supply
no driver needed for Windows XP, Windows Vista, Windows 7, Windows 8.1, Windows 10, Windows 11 and Mac OS X (32 and 64 bit)
optional ESI MIDI Port driver for multi device / multi client operation under Windows available
Read more
 3 in stock $21.05
Zoom AMS-24 2x4 USB-C Audio Interface
Zoom AMS-24 2x4 USB-C Audio Interface (2x4 USB-C audio interface)
Cat: 887739 Rel: 12 Sep 22
 
2x4 USB-C audio interface
Notes: AMS-24 - For One or More Musicians

Flip the switch

The AMS-24 and AMS-44 feature our innovative Music / Streaming Switch.

When switched to Music mode, you can record into your DAW with expanded input and output routing options.

When switched to Streaming mode, all inputs are combined into a single signal so you can easily stream without needing additional complicated software.

Record & stream with ease

AMS Audio Interfaces are designed for musicians who want to record music with their DAW or easily livestream on platforms like YouTube and Twitch, without all the typical complications.

AMS-24 | 2-In, 4-Out

The AMS-24 is perfect for solo streams and multi-instrument sessions. It features two XLR/TRS combo inputs along with Zoom's low-noise preamps. Also included are two headphone outputs and two TRS outputs for external monitors.

Quick control

With their onboard hardware switches, the AMS-24 and AMS-44 are designed to simplify common streaming challenges without the need for additional software.

Little switch, big streams

Toggle from recording to livestreaming with the Music / Streaming Switch. When in Music mode, each input acts independently with individual gain control. It also sends separate mixes to each headphone output.

When in Streaming mode all inputs are combined into one signal to work seamlessly with your streaming software.

Onboard monitoring

Use the Direct Monitor Switch to send the input signal directly to your headphones while routing the same signal to your DAW or streaming software.

Loop it back

The Loopback Switch combines the input audio with playback from your computer and routes it to your streaming software. This is perfect for adding background music to your stream or singing live with an instrumental track.

Mic/line guitar

Switch Input 1 from mic or line level to guitar level (Hi-Z).

Stereo link

Links two inputs for stereo recording or streaming and allows you to control both inputs with one gain knob.

Phantom power

Provides +48V phantom power for condenser microphones.

Power options

All three AMS interfaces can be powered from your PC or Mac via USB-C. Use external power when working from a tablet or mobile phone.
Additionally, the AMS-24 can also use two AA batteries.

Plug it in...

Use the AMS Series on any device thanks to its support for Mac and PC, along with iOS and Android devices.

...And perform

The AMS Series is designed to integrate seamlessly with commonly used software, apps and platforms.

In Streaming mode, connect with your audience by streaming to popular platforms like YouTube, Facebook, Twitch, Instagram and Patreon.

In Music mode, record with software like Adobe Audition, Pro Tools, Cubase and GarageBand.

What's in the box

AMS-24 USB Audio Interface
USB-C Cable
Quick Tour

Technical Specifications

Input and Output Channels

Number of input channels: Mono (MIC/LINE): 2
Number of output channels: Stereo (TRS): 1
Stereo (PHONES): 2

Connectors

Input 1-2 - Type: XLR/TRS combo jacks
(XLR: 2 HOT, TRS: TIP HOT)
Input gain: -8 - +58 dB / -8 - +50 dB (when set to GUITAR)
Input impedance: XLR: 2.7 kO
TRS: 18 kO / 330 kO (when set to GUITAR)
Maximum input level: XLR: +6 dBu
TRS: +22 dBu / +8.5 dBu (when set to GUITAR)
Phantom: +48 V

OUTPUT A (standard phone jacks)
Type: TRS phone jacks (impedance balanced)
Maximum output level: +10 dBu (at 0 dBFS)
Output impedance: 100 O

OUTPUT A-B (headphone jacks) - Type: 3.5mm stereo mini jacks
30 mW + 30 mW (32 O load)
Output impedance: 10 O

USB: USB Type-C (audio interface function)
Use a USB cable that supports data transfer. USB bus power is supported.
DC 5V - USB Type-C (for power supply)

Frequency Response

44.1 kHz: 1 dB (20 Hz - 20 kHz)
96 kHz: 1.5 dB (20 Hz - 40 kHz)
Equivalent Input Noise: -120 dBu or less (IHF-A) at +58dB/150O input

Audio Interface
Input and output channels
Recording: 2 channels
Playback: 4 channels
Sampling frequencies: 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz
Bit depth 24-bit
Interface: USB 2.0
Class: USB Audio Class 2.0

Power:
2 AA batteries (alkaline, lithium, or rechargeable NiMH)
AC adapter (ZOOM AD-17): DC 5 V/1A
USB bus power is supported.
Rated Current
USB/AC adapter (5 V): 380 mA
Batteries (2.4 V): 470 mA

Estimated continuous operation time using batteries
44.1 kHz, 48 V off, with 32O headphone load
Alkaline batteries: about 4 hours
NiMH batteries (1900 mAh): about 5.5 hours
Lithium batteries: about 11 hours
The above values are approximate. Continuous battery operation times were determined using in-house testing methods. They could vary greatly according to use conditions.
Power Consumption: 5 W maximum

Dimensions: 94.5 mm (W) × 74.0 mm (D) × 46.0 mm (H)
Weight (unit only): 134 g
Weight (including batteries): 180 g
Read more
MRP:$121.07 SAVE 29%
 1 in stock $86.52
Zoom AMS-44 4x4 USB-C Audio Interface
Zoom AMS-44 4x4 USB-C Audio Interface (4x4 USB-C audio interface)
Cat: 887745 Rel: 12 Sep 22
 
4-in/4-out USB-C audio interface
Notes: Great value little 4-in/4-out interface, designed for portability when making music or streaming. Dual headphone outputs and four XLR/TRS combo inputs with pre-amps give you plenty of versatility.

Supplier's Notes:
AMS-44 For One or More Musicians

AMS-44 | 4-In, 4-Out

Whether you're recording or streaming, the AMS-44 keeps your setup simple. It features four XLR/TRS combo inputs along with Zoom's high-performance, low-noise preamps. The interface also includes two headphone outputs and two TRS outputs for external monitors.

Quick control

With their onboard hardware switches, the AMS-24 and AMS-44 are designed to simplify common streaming challenges without the need for additional software.

Little switch, big Streams

Toggle from recording to livestreaming with the Music / Streaming Switch. When in Music mode, each input acts independently with individual gain control. It also sends separate mixes to each headphone output.

When in Streaming mode all inputs are combined into one signal to work seamlessly with your streaming software.

Onboard monitoring

Use the Direct Monitor Switch to send the input signal directly to your headphones while routing the same signal to your DAW or streaming software.

Loop it back

The Loopback Switch combines the input audio with playback from your computer and routes it to your streaming software. This is perfect for adding background music to your stream or singing live with an instrumental track.

Mic/line guitar

Switch Input 1 from mic or line level to guitar level (Hi-Z).

Stereo link

Links two inputs for stereo recording or streaming and allows you to control both inputs with one gain knob.

Phantom power

Provides +48V phantom power for condenser microphones.

Power options

All three AMS interfaces can be powered from your PC or Mac via USB-C. Use external power when working from a tablet or mobile phone.

Additionally, the AMS-24 and AMS-44 can also use two AA batteries.

Plug it in...

Use the AMS Series on any device thanks to its support for Mac and PC, along with iOS and Android devices.

...And perform

The AMS Series is designed to integrate seamlessly with commonly used software, apps and platforms.

In Streaming mode, connect with your audience by streaming to popular platforms like YouTube, Facebook, Twitch, Instagram and Patreon.

In Music mode, record with software like Adobe Audition, Pro Tools, Cubase and GarageBand.

What's in the box

AMS-44 USB Audio Interface
USB-C Cable
Quick Tour

Technical Specification

Input and Output Channels
Number of input channels: Mono (MIC/LINE): 4
Number of output channels: Stereo (TRS): 1
Stereo (PHONES): 2

Connectors

INPUT 1-4 - Type: XLR/TRS combo jacks
(XLR: 2 HOT, TRS: TIP HOT) Input gain: -8 - +58 dB / -8 - +50 dB (when set to GUITAR)
Input impedance: XLR: 2.7 kO
TRS: 18 kO / 330 kO (when set to GUITAR)
Maximum input level: XLR: +6 dBu
TRS: +22 dBu / +8.5 dBu (when set to GUITAR)
Phantom power: +48 V
OUTPUT A (standard phone jacks)
Type: TRS phone jacks (impedance balanced)
Maximum output level: +10 dBu (at 0 dBFS)
Output impedance: 100 O
OUTPUT A-B (headphone jacks): Type: 3.5mm stereo mini jacks - 30 mW + 30 mW (32 O load)
Output impedance: 10 O
USB: USB Type-C (audio interface function)
Use a USB cable that supports data transfer. USB bus power is supported.
DC 5V: USB Type-C (for power supply)
Frequency Response: 44.1 kHz: 1 dB (20 Hz - 20 kHz) - 96 kHz: 1.5 dB (20 Hz - 40 kHz)
Equivalent input noise: -120 dBu or less (IHF-A) at +58 dB/150O input

Audio interface

Input and output channels: Recording: 4 channels
Playback: 4 channels
Sampling frequencies: 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz
Bit depth: 24-bit
Interface: USB 2.0
Class: USB Audio Class 2.0

Power

2 AA batteries (alkaline, lithium, or rechargeable NiMH), AC adapter (ZOOM AD-17): DC 5 V/1 A -USB bus power is supported.
Rated Current
USB/AC adapter (5 V): 350 mA
Batteries (2.4 V): 560 mA
Estimated continuous operation time using batteries
44.1 kHz, 48 V off, with 32O headphone load
Alkaline batteries: about 3 hours
NiMH batteries (1900 mAh): about 4.5 hours
Lithium batteries: about 8.5 hours
The above values are approximate. Continuous battery operation times were determined using in-house testing methods. They could vary greatly according to use conditions.
Power Consumption: 5 W maximum

Dimensions: 129.0 mm (W) × 74.0 mm (D) × 46.0 mm (H)
Weight (unit only): 177 g
Weight (including batteries): 223 g
Read more
MRP:$167.39 SAVE 11%
 1 in stock $148.97
Click for better price!
or call +44 20 7424 1960
quote 887745
IK Multimedia iRig Pro Quattro I/O Deluxe 4in/2out Portable Audio & MIDI Interface (2x iRig MIC XY stereo microphones + windscreen + 9V PSU + travel case)
Cat: 872911 Rel: 05 Sep 22
 
iRig Pro Quattro I/O inteface + 2 x iRig MIC XY stereo microphones + Windscreen + 9V PSU + Travel case
Notes: Deluxe version of the impressive iRig Pro Quattro features the same high-quality portable interface with the added bonus of a full complement of accessories, including mics and travel case.

Supplier's Notes:
***Note: This version of the iRig Pro Quattro I/O comes with 2 x Mic XY stereo microphones, foam windscreen, and a carry case. ***

Go pro all the way

For a little more, you get a lot with the iRig Pro Quattro I/O Deluxe edition. The value of the iRig XY stereo mic capsules alone is worth the upgrade. In addition to the pair of mics you'll get the optional power supply, which you can also use to keep your iOS device charged during extended sessions. Plus you'll get a custom carrying case to protect and transport your Quattro I/O and XY mics wherever your field work takes you.

Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Dimensions

Size: 160mm/6.29" x 90mm/3.54" x 40mm/1.57"
Weight: 340g/11.99oz (without batteries)
Cable length: 60cm/23.62"

Box contents

iRig Pro Quattro I/O
1/4" thread adapter
4x AA Batteries (alkaline)
iOS Lightning to mini-DIN cable
USB-A to mini-DIN cable
2.5mm jack to MIDI female adapter
2 iRig MIC XY stereo microphones
Windscreen
9V PSU
Travel case
Read more
MRP:$452.68 SAVE 33%
 2 in stock $302.84
Steinberg UR12 Podcast Starter Pack (1x UR12, 1x ST-M01, WaveLab Cast + Cubase AI)
Cat: 881023 Rel: 26 Aug 22
 
UR12 Podcast Starter Pack - UR12 Interface with Microphone Bundle and WaveLab Cast + Cubase AI Software Package
Notes: The easy-to-use production toolkit to get you creating podcasts quickly and in great quality on your computer or iOS device. The UR12 Podcast Starter Pack combines a dual-channel USB 2.0 audio interface, quality condenser microphone and all mic accessories with a full software suite. It's a complete, studio-grade social media production package.

The ST-M01 studio condenser microphone

The ST-M01 studio condenser microphone includes the heritage of many high-quality studio mics. With excellent sensitivity and a wide frequency response for recording speech, singing or any musical instrument, it captures every nuance of the signal in excellent quality.
The included accessories

These qualities are enhanced by the included pop screen to reduce noise, a low noise microphone cable to connect the ST-M01 to the UR12 and a tabletop mic stand to help you place the microphone in the best position.

Advantages Of Using The UR12 Podcast Starter Pack

Become a podcast pro with the complete package

Share your thoughts, inspiration, ideas and news with the world by recording podcasts for broadcast on any online medium, or write them to audio files for distribution or download. With this versatile and highly portable production package, you can produce your podcast anywhere - at home, at work, on vacation, even in the middle of nowhere! With seamless PC/Mac computer and iOS compatibility, it has everything you need to become a true podcast pro.

Attract and entertain followers by live streaming

Streaming and vlogging are great ways to reach new audiences, as well as entertaining your existing followers. The UR12 Podcast Starter Pack provides the ideal platform for you to go live online. The Loopback function lets you easily stream any audio content to live online platforms, with the included condenser microphone, high-quality inputs and included software meaning your audience will hear everything in superb quality.

Work from home in the best audio quality

Nowadays working from home has become commonplace; connecting with colleagues and business partners via video chats is an essential part of the working day for many people. The UR12 Podcast Starter Pack includes everything you need to help improve the quality of your spoken contributions to online meetings. With the high-quality UR12 audio interface, microphone and accessories, you can help your colleagues and business partners to clearly understand your message.

Go live online

The UR12 Podcast Starter Pack includes everything you need for performing online. Whether it's karaoke with social singing apps like Smule, live music, spoken recitals, sports commentaries or just having fun with friends, the iOS connectivity and included high-quality condenser microphone, cable and pop shield make it the ideal online performance package, wherever you are.

Connectivity

Total number of inputs: 2
Total number of Outputs: 2
Microphone inputs: 1
Inputs with HI-Z: 1
Analogue inputs TRS: 1
Analogue inputs Combo: 0
Analogue outputs TRS: 0
Phantom power: 1
Headphones outputs: 1
Digital In ADAT: 0
Digital Out ADAT: 0
Digital In S/PDIF Optical: 0
Digital Out S/PDIF Optical: 0

Dimensions

Weight: 850 g
Width: 159 mm
Height: 47 mm
Depth: 144 mm

DSP

Monitoring: Hardware based zero latency monitoring (switchable)

General
Connection Type: USB 2.0
Design: Desktop (1/3 19", 1HU)
Casing: Full-metal casing

AD/DA: 24 bit
Maximum sample rate: 192 kHz
Dynamic range input: 101 [dB]

System requirements

Operating systems (Mac): macOS High Sierra, macOS Mojave, macOS Catalina, macOS Big Sur, macOS Monterey
Operating systems (Windows): Windows 7 (64-bit), Windows 8.1 (64-bit), Windows 10 (64-bit), Windows 11 (64-bit)
Operating systems (iOS): iOS 14, iOS 10, iOS 11, iOS 12, iOS 13
Apple silicon-based Mac: Rosetta 2 App
Port: USB 2.0, USB 3.0 (Tested with Intel USB 3.0 host controller)
CPU minimum (Windows): Intel Core i-series multicore processor 2 GHz or faster, or AMD equivalent processor
RAM minimum: 4 GB
Hard disk free space: 100 MB
Display resolution recommended: 1280 x 800
Internet connection for: manuals and instructions, driver and tools, additional downloads, license activation, account sign up and product registration, installer download
Read more
MRP:$178.97 SAVE 15%
 1 in stock $151.34
Mooer Audio Steep I USB Audio Interface
Cat: 896584 Rel: 23 Aug 22
 
A multi-platform audio interface with support for high-resolution audio up to 24bit/192 KHz and combination microphone, line-in, and high-impedance value instrument support.
Notes: A multi-platform audio interface with support for high-resolution audio up to 24bit/192 KHz and combination microphone, line-in, and high-impedance value instrument support. Dual-channel outputs are also included as well as one USB-C port for power and one USB-C port for data transfer, that can also be used for power when connected to a PC. Both the Steep I and II include dual LED input level indicators, support for 48v phantom power, a stereo direct monitor button, and knobs to control main output volume, mix, and input gain levels.

Specifications

Frequency Response: 20 Hz to 20kHz: 0.07dB
THD+N: 0.0094%
Minimum gain: -1 dBFS input with 22 Hz/22 kHz bandpass filter
Maximum Input Level (minimum gain level):L +11 dBu
Gain Range: 50dB
Input impedance: 1.5M ohm

Line Outputs

Output Jack: 1/4" TRS jack*2 (support balanced signal)
Dynamic Range: 108dB (A-weighted)
Maximum Input Level (minimum gain level) : +5.746 dBu
THD+N: 0.019% (minimum gain, -1 dBFS input with 22 Hz/22 kHz bandpass filter)
Input impedance 430 ohm

Headphone Outputs

Output Jack: 1/4" TRS jack*1
Dynamic Range: 104.9dB
Maximum Input Level (minimum gain level): +9.738 dBu
THD+N: <0.002% (minimum gain, -1 dBFS input with 22 Hz/22 kHz bandpass filter)
Output impedance: <1 ohm
Read more
 1 in stock $124.75
Click for better price!
or call +44 20 7424 1960
quote 896584
EVO By Audient EVO 16 24x28 USB Audio Interface
Cat: 879748 Rel: 21 Jun 22
 
24-in/24-out USB audio interface
Notes: A new way of doing things

Make recording easy

Eight award winning EVO Preamps alongside our advanced converter technology will make everything you do, sound better. Add to that, intelligent mic preamps that set their own levels with Smartgain, the all new, groundbreaking Motion UI control system, and enough I/O firepower to tackle even the biggest of sessions, EVO 16 is truly a studio powerhouse, designed from the ground up to make recording easy.

The EVO Mic Preamp

Get studio quality recordings - Level up your audio performance with eight sonically stunning EVO Preamps. Backed by 25 years of engineering experience, our analogue mic preamp has been designed to deliver the most accurate, clean, and true to source version of your audio, no matter what you're recording.

An analogue mic pre but better

The EVO Preamp technology not only has all the sonic advantages of an analogue mic preamp, but combines it with digitally controlled precision, giving you the ability to set your gain with pin-point accuracy, right down to the decibel.

Smartgain - A total gain-changer

Make recording drums and larger sessions easy with Smartgain. Automatically set the gain for all 8 channels at once with a simple touch of a button. Powered by our lightning quick Smartgain algorithm, Smartgain uses advanced peak analysis to automatically analyse, adjust and set your gain to the perfect levels - all in less than 20 seconds!

Your own assistant engineer

Record, adjust levels, repeat? Sound familiar? Save time and make recording on your own a breeze with Smartgain. Simply set up your mics, hit Smartgain, start performing and EVO 16 will take care of the rest.

Advanced Converter Technology - Clearer, sharper clarity

Providing a MASSIVE 121dB of dynamic range, EVO 16's high performance converter technology makes sure you hear your audio accurately, helping you make creative decisions confidently, identify issues and improve your recording and mixing game.

Line Outputs - Pick The Best Route

Connect and listen to your mixes through multiple sets of speakers with EVO 16's eight line outputs. Alternatively use the extra line outputs to send audio to external outboard gear, such as compressors or FX units, or to headphone amps for distribution to your artists.

Headphone Outputs- Clarity where you need it most

Drive even the most demanding headphones with EVO 16's two dedicated headphone amps. Easily power headphones up to 600 Ohms all while experiencing detailed monitoring and playback as well as plenty of volume.

Classic tone, modern sound

To build a monster guitar sound you need the right foundation. Our harmonically rich JFET instrument input circuit is designed to replicate the input stage of a classic valve amplifier, providing an ideal sonic foundation before you hit your guitar sims.

Digital I/O - Room For Expansion

Future proof your studio and configure your setup to tackle bigger sessions. Whether you're recording drums or taking on a full band, EVO 16's optical inputs and outputs have got you covered. Supporting both ADAT and SPDIF, add up to 16 channels of mic preamps to your setup, giving you plenty of options for expanding your studio down the line. Pairs great with any external mic preamp.

Specifications

Microphone Preamplifier
Mic Gain Range: 58dB
Line Gain Range: 58dB (-10dB pad)
Phantom Power: 48v +/-4v @ 10mA/Channel
Mic EIN: <-127.5dBu
CMRR: >80dB @ 1kHz
Maximum Input Level: +16dBu
Input Impedance (Mic): >3kO Balanced
Input Impedance (Line): >10kO Balanced
Frequency Response: +/-0.5dB 10Hz to 40kHz
Crosstalk: <-105dBu @ 1kHz <-103 @ 10kHz
THD+N @ 0dBu (1kHz): <0.0015%
SNR: 100dB
XLR: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4" Jack: IP (Hot), RING (Cold) & SLEEVE (Shield)

D.I
D.I Gain Range: 58 dB
Maximum Input Level: +10dBu
Input Impedance:500k
Frequency Response: +/-0.5dB 10Hz to 20kHz
THD+N @ 0dBu (1kHz): <0.1%
SNR: 100dB
1/4" Jack: TIP (Hot) & SLEEVE (Shield)

ADC Inputs
Digital Reference Level: 0dBFS = +10.5dBu
Frequency Response: +/-0.5dB 10Hz to Fs/2
Crosstalk: -125dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.001%
Dynamic Range: 112.5dB A-Weighted

DAC Outputs
Maximum Output Level: 12dBu
Digital Reference Level: 0dBFS = +12dBu
Output Impedance: <50O
Frequency Response: +/-0.5dB 10Hz to Fs/2
Crosstalk: <-110dBu @ 1kHz
THD+N @ -1dBFS (1kHz): <0.001%
Dynamic Range: 121dB A-weighted
1/4" Jack: TIP (Hot), RING (Cold) & SLEEVE (Shield)

Headphone Output
Max Output Level: 11.25dBu
Output Impedance: <50O
Frequency Response: +/-0.5dB 10Hz to Fs/2
Crosstalk: -108dBu @ 1kHz
THD+N @ -1dBFS (1kHz): <0.001%
Dynamic Range: 118dB A-weighted
Max Level Into 30ohms: +8.5 dBu, 0.00094% THD+N, 1.66Vpk Power: 86mW
Max Level Into 60ohms: 10 dBu, 0.00079% THD+N, 2.55Vpk Power: 104mW
Max Level Into 600ohms: 11.2 dBu, 0.00057%THD+N, 3.83Vpk Power: 24mW
1/4" Jack: TIP (Left), RING (Right) & SLEEVE (Shield)
Read more
MRP:$494.79 SAVE 20%
 3 in stock $397.94
IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface
Cat: 872907 Rel: 10 May 22
 
4 IN/2 OUT Audio/MIDI mobile, broadcast/podcast , and field recording interface + stand-alone mixer
Notes: Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)
Read more
MRP:$378.99 SAVE 38%
 1 in stock $235.54
Arturia MiniFuse 1 1x2 USB Audio Interface (white)
Cat: 848242 Rel: 23 Mar 22
 
Portable 1-in/2-out audio interface with included software instruments and effects to get recording.
Notes: Arturia MiniFuse 1 is a portable 1 in / 2 out audio interface audio interface designed to work for you, whatever your style. Record your vocals, guitar, podcast, or produce your track at the highest studio quality. A complete software bundle with instruments, recording software, and effects is included - recording and producing has never been easier.

MiniFuse comes from the award winning Arturia AudioFuse line of studio audio interfaces. Class-compliant & Bus-powered means you can plug in and go, and you won't need an additional power supply as it's USB powered. Recording has never been easier.

MiniFuse 1 fits right into your setup with a straightforward set of ins and outs. Its single combo input lets you easily connect either XLR or 1/4" jack cables. Plug into your computer with quick & compact USB-C compatibility. Finally, connect USB devices like your MIDI keyboard with the additional USB hub socket.

For audiophiles, MiniFuse boasts a 110db dynamic range and a class-leading equivalent input noise of -129dB. For everyone else, that means that every recording you make sounds incredible, with rich dynamics, clear noise-free signal, and studio-grade quality - you can't go wrong.

Break the mold and take your studio on the go. MiniFuse is not only compact and lightweight; its rugged aluminium casing can handle the mobile producer's lifestyle. Put it in your bag, get out there, and find the sound you've been looking for.

Whether you're using a laptop or desktop, MiniFuse can work for you. PC or Mac, connect it and enjoy total recording freedom. Better still, with the MiniFuse Control Center app, you can control its inputs, outputs, settings, and firmware updates in one place

Keep your creativity fresh and your inspiration flowing with step-by-step music production tutori-als, mixing hacks, and Ableton project templates designed by artists, producers, and beatmakers, featuring the software that's included with MiniFuse. Updated frequently, no subscription re-quired, and free with your MiniFuse. MiniFuse comes with an exclusive selection of software titles offering everything you need to give your sound the professional edge.

Arturia FX

Colour your sound with 4 premium FX plugin recreations of studio classics; a lush plate reverb, a gritty analogue preamp, a classic tape echo, and a rich stereo chorus.

Ableton Live Lite

Compose, record, perform, and produce anything with an introduction to one of the most widely-used musical software titles in the business - yours with MiniFuse.

Analog Lab Intro

Instantly add inspiring sounds from Arturia's award-winning keyboard emulations to your mix with hundreds of presets to explore, from vintage '80s synths to fat modern sounds.

Auto-Tune Unlimited 3-months free subscription

Refine your vocal parts for perfect harmony or go full trap-style autotune with a 3-month sub-scription to the industry's favorite voice tuning plugin.

GUITAR RIG 6 LE

An inspiring selection of amps, cabs, delays, reverbs, stompboxes and compressors, so you can build your own processing chains and customize your perfect guitar tones.

Splice Creator Plan

3-months free subscription Access millions of hi-def royalty-free samples and plugin presets, from lo-fi drum loops to punchy vocal one-shots, and add them to your personal collection for life.

Huge software bundle includes: Ableton Live Lite, Analog Lag Intro, 4 x Arturia FX, Auto-Tune 3-month subscription, GUITAR RIG 6 LE, Splice 3-month subscription, and more...

Included Software

Ableton Live Lite: For your recording and mixing needs

Analog Lab Intro: Classic and modern synthesizer and keyboard sounds

4 x Arturia FX: A world-class preamp, plate reverb, tape echo and chorus effects

Auto-Tune Unlimited: 3-month subscription to the leading pitch tuning software

GUITAR RIG 6 LE for guitar amplification emulations and guitar

Line Inputs
Input impedance: 16kO
Maximum input level: +22dBu
Gain range: 56dB
Frequency response 20Hz to 20kHz: +/-0.05dB (min gain)
Dynamic range: 110dB typical (A-weighted)
THD+N @ 1kHz: -100dB typical (un-weighted)
Instrument Input
Input impedance: 1MO on Tip
Maximum input level: +11.5dBu
Gain range: 56dB
Frequency response 20Hz to 20kHz: +/-0.06dB (min gain)
Dynamic range: 110dB typical (A-weighted)
THD+N @ 1kHz: -91dB typical (un-weighted)
Microphone Preamps
Input impedance: 2.5kO
Maximum input level: +9dBu
Gain range: 56dB
Equivalent Input Noise (EIN): -129dB typical (A-weighted)
Frequency response 20Hz to 20kHz: +/-0.06dB (min gain)
Dynamic range: 110dB typical (A-weighted)
THD+N @ 1kHz: -100dB typical (un-weighted)
Speakers
Output impedance: 94O
Maximum output level: +12dBu
Frequency response 20-20kHz: +/-0.09dB
Dynamic range: 107.5dB typical (A-weighted)
THD+N @ 1kHz: -101dB typical (un-weighted)
Phones
Output impedance: 10O
Maximum output level: +11.4dBu
Frequency response 20-20kHz: +/-0.09dB
Dynamic range: 104dB
Read more
MRP:$93.69 SAVE 16%
 1 in stock $78.25
Presonus Revelator io44 96 kHz/24-Bit Bus-Powered USB-C Audio Interface
Cat: 861821 Rel: 24 Feb 22
 
96 kHz/24-bit bus-powered USB-C audio interface
Notes: Create a high-end recording studio anywhere with Revelator io44. Whether you want to connect a professional XLR microphone, a guitar, a DJ mixer, or your gaming headset, Revelator io44 has all the inputs and outputs you need to record... even a built-in mixer that lets you blend audio from multiple applications. Processing is available on every analog input, so you'll sound smooth and polished in your performances and recordings.

Guitarists, singers, DJs, and everyone else: you'll sound great, regardless of if you're tracking a record or performing live online.

25 years of studio-grade design experience is inside Revelator io44. Your XLR microphones will sound their best thanks to the PreSonus XMAX-L mic preamp with plenty of gain for your professional microphone to capture your voice smoothly, naturally, and distortion-free - and the onboard processing will make your voice stand out. Whether you're recording a vocal or chatting with your followers during a livestream, you'll be heard loud and clear.

Revelator io44 features an easy-to-use mixer that lets you blend audio from up to three different applications at once. Add backing tracks, Skype calls, and even gameplay quickly and easily without taxing your computer. An automatic output limiter prevents your stream from distorting. Whether you're on macOS or Windows, you can create custom mixes of your inputs and your applications and monitor it all at near-zero latency so you can stream and record simultaneously!

Features

Ultra-compact, mobile bus-powered USB-Cr compatible audio interface for recording, streaming, podcasting and more
96 kHz / 24-bit operation for pristine audio recording
1 digitally controlled, high-headroom, low noise XMAX-L mic preamp for professional results
1 Instrument input (via combo) for guitars and basses
1 TRS ?" Stereo Line input for DJ mixers and more
Stand-alone functionality lets you take your sound with you
?Balanced Main Left / Right with independent level control and mute
1 TRRS 1/4"""" stereo Headset connection (mic in, stereo out)
Integrated mixer lets you blend audio from up to three applications at once
Powerful onboard StudioLive processing lets you polish your sound (or completely transform it) with reverb, compression, EQ, and fantastic Voice FX - all without taxing your CPU
Professionally crafted Presets make you sound like a pro with a single click. You can also create your own custom presets to share, save, or produce on the go
Studio One Artist recording software and Studio Magic software bundle included
Read more
MRP:$156.86 SAVE 28%
 2 in stock $112.65
Arturia MiniFuse 2 2x2 USB Audio & MIDI Interface (black)
Cat: 848243 Rel: 18 Jan 22
 
2-in/2-out audio interface with included software instruments and effects to get recording.
Notes: Excellent quality at an affordable price courtesy of Arturia's MiniFuse range. Two-in, two-out design with front panel volume control and MIDI in/out to help control hardware synths and drum machines.

Supplier's Notes:
Arturia MiniFuse 2 is an easy-to-use audio & MIDI interface that gives you pro-grade sound quality, smart connectivity, and a curated selection of the industry's best creative software. From guitar tracking to podcast recording, this is your solution for every type of audio creation.

MiniFuse comes from the award winning Arturia AudioFuse line of studio audio interfaces. Class-compliant & Bus-powered means you can plug in and go, and you won't need an additional power supply as it's USB powered. Recording has never been easier.

Creativity connected

MiniFuse 2's inputs and outputs bridge the gap between your ideas and the finished product. Record 2 instrument or mic sources simultaneously with dual combo inputs, sync and record your MIDI devices with 5-pin DIN connections, and connect extra devices with the additional USB hub socket - all via universal USB-C computer connectivity.

Simply the best sound

On paper, MiniFuse 2 gives you a 110db dynamic range and a top-tier equivalent input noise of -129dB. Put more simply, that means unbelievably great sound that can compete with even the finest studios. Enjoy responsive dynamics, a clear noise-free signal, and quality that you can really feel. Tough, portable design MiniFuse 2 is designed to accompany you for those last-minute sessions, quick deadlines, and spontaneous musical moments. It's not only compact and lightweight; its rugged aluminium ca-ing can handle the mobile producer's lifestyle. Take your sound with you, wherever you go. Fully operational Whether you're using a laptop or desktop, MiniFuse can work for you. PC or Mac, connect it and enjoy total recording freedom. Better still, with the MiniFuse Control Center app, you can control its inputs, outputs, settings, and firmware updates in one place. Inspiration on the house Keep your creativity fresh and your inspiration flowing with step-by-step music production tutorials, mixing hacks, and Ableton project templates designed by artists, producers, and beatmakers, featuring the software that's included with MiniFuse. Updated frequently, no subscription re-quired, and free with your MiniFuse. MiniFuse comes with an exclusive selection of software titles offering everything you need to give your sound the professional edge. Arturia FX Color your sound with 4 premium FX plugin recreations of studio classics; a lush plate reverb, a gritty analogue preamp, a classic tape echo, and a rich stereo chorus. Ableton Live Lite Compose, record, perform, and produce anything with an introduction to one of the most widely-used musical software titles in the business - yours with MiniFuse. Analog Lab Intro Instantly add inspiring sounds from our award-winning keyboard emulations to your mix with hundreds of presets to explore, from vintage '80s synths to fat modern sounds. Auto-Tune Unlimited 3-months free subscription Refine your vocal parts for perfect harmony or go full trap-style autotune with a 3-month sub-scription to the industry's favourite voice tuning plugin.

GUITAR RIG LE

An inspiring selection of amps, cabs, delays, reverbs, stompboxes and compressors, so you can build your own processing chains and customize your perfect guitar tones. Splice Creator Plan 3-months free subscription Access millions of hi-def royalty-free samples and plugin presets, from lo-fi drum loops to punchy vocal one-shots, and add them to your personal collection for life.
Read more
MRP:$135.80 SAVE 20%
 2 in stock $108.43
Rode AI-Micro Compact 2x2 USB-C Audio Interface
Cat: 854265 Rel: 11 Jan 22
 
2-in/2-out USB-C audio interface
Notes: The AI-Micro is an ultra-compact dual-channel interface for recording high-quality audio to a mobile device or computer. Featuring two auto-sensing inputs for connecting virtually any microphone with a 3.5mm output, headphone monitoring, a universal USB output for use with smartphones, tablets and computers, and compatibility with RODE apps for supercharged sound, the AI-Micro allows you to record without limits.

Incredible Audio, Anywhere

The AI-Micro allows you to capture high-quality audio on your mobile or computer with ease. It features two 3.5mm inputs for connecting a wide range of microphones, including RODE VideoMics, lavaliers, wireless systems like the Wireless GO. These are auto-sensing inputs that detect whether a TRS or TRRS microphone is connected and automatically adapt to accommodate - no adaptors needed. Input 1 can also be configured as a single stereo TRS input for use with stereo microphones.

High-quality microphone preamps and high-resolution (24-bit/48kHz) recording ensure crystal-clear audio capture on any device, with a headphone output for echo-free audio monitoring and playback. Whether you're interviewing, podcasting, presenting, or livestreaming, record incredible audio anywhere with the AI-Micro.

Universal Compatibility With All Your Devices

The AI-Micro can connect seamlessly to all your devices via its universal USB output. It is supplied with USB-A, USB-C and Lightning cables, so you can get recording instantly, and is plug-and-play compatible with Mac, Windows, iOS and Android devices. Portable recording has never been easier.

Pocket-sized Portability

Weighing less than 20 grams, the AI-Micro is extremely compact and lightweight. Just add two lavalier microphones and you have a complete, studio-quality recording setup that fits in your pocket. Perfect for interviewing in the field, on-the-go podcasting, and making video calls or livestreaming at home.

Supercharge Your Microphone

The AI-Micro is compatible with the entire RODE app suite, giving you access to expanded features and functionality, on-the-go configuration, broadcast-quality recording on any device.

Specifications
Acoustic & Electrical Specifications
Frequency Response: 20Hz to 20kHz
Headphone Output Power: 125mW into 32O
Input Dynamic Range: 100dB A-Weighted
Gain Range: 0-26dB analog gain
Analogue Inputs: 2 x 3.5mm auto-sensing TRS/TRRS
Analogue Outputs: 3.5mm TRS headphone output
Computer Connectivity: USB Type-C
OS Requirements: macOS Big Sur and higher
Windows: 10 (Build 19041) and higher
iOS: 14 and higher
Android: 9.0 and higher

Simultaneous I/O: 2/2
Number of Preamps:2
Bit Depth: 24-bit
Sample Rates: 44.1/48kHz
Power Requirements: Bus Powered

Mechanical Specifications

Weight (g)- AI-Micro: 13
SC21: 6, SC22: 4, SC23: 6
Dimensions (mm)- AI-Micro Width: 40, Length 11.1, Height: 38.2
SC21, SC22, SC23 Length: 300

Compatible RODE Products:

SmartLav+
Lavalier GO
RODELink Lav
All VideoMics
SC15, SC16, SC17, SC18, SC19, SC20, SC21, SC22, SC23

Box Contains:

AI-Micro
1 x AI-Micro
1 x SC21
1 x SC22
1 x SC23
Read more
MRP:$82.11 SAVE 21%
 1 in stock $65.09
iConnectivity mio 1-In/1-Out MIDI To USB Cable Interface (1.5m)
Cat: 825862 Rel: 08 Nov 21
 
1 x 1 MIDI to USB cable interface (1.5 m), for Mac, PC. iOS
Notes: mio- the perfect 1 in 1 out MIDI to USB interface

mio is a 1 in 1 out USB 16 channel MIDI interface to connect your MIDI compatible controller, keyboard, synthesizer, or drum machine to your computer. mio is USB bus powered and is plug and play compatible with Windows and Mac computers.

What Makes mio Unique?

Even the most basic tasks need to be done right. So iConnectivity engineered a new basic MIDI interface from the ground up that does everything right.

Not one of iConnectivity's competitors' 1x1 MIDI interfaces could pass all these tests:

Indestructible drivers - Interfaces that use their own drivers have to be updated all the time, or they stop working properly. Or they were USB Class-Compliant years ago, but today they aren't anymore. mio is engineered to today's strict guidelines to ensure compatibility for years to come.

Stellar MIDI Management - When the MIDI datastream gets heavy, other interfaces choke. iConnectivity interfaces deliver MIDI reliably no matter what.

Immaculate Electrical Design - You don't want a MIDI interface that introduces noise or even crashes your system, like some do. mio is engineered properly.

Performance Optimized - A MIDI interface that works too slowly is useless. mio is optimized for the highest performance.

The iConnectivity Advantage: iConnectivity's name on your interface means that time was taken to do it right, whether it's the simple 1 x 1 models to the uniquely sophisticated high-end interfaces.

System Requirements

Macintosh
Mac OS X
1 free USB port

Windows
Windows 7 or later
1 free USB port

iOS
iOS 8 or greater with Camera Connection Kit (CCK)*
CoreMIDI compatible app
Read more
 1 in stock $28.95
iConnectivity mioXM MIDI Interface
Cat: 825885 Rel: 08 Nov 21
 
Advanced 4 in, 4 out MIDI-USB-RTP/network interface for Mac, PC, iOS
Notes: mioXM - more connectivity than you can shake a stick at.

With mioXM it's never been easier to get all of your MIDI gear talking to each other. Harness the power of iConnectivity advanced computer and network connectivity and experience why mioXM redefines what a MIDI interface can and should do.

Connect all your MIDI devices (USB-MIDI, DIN-MIDI, RTP/Network-MIDI) and let this rugged, versatile interface put you in control of your MIDI devices and workflow.

On stage or in the studio, RTP/Network-MIDI capability means you are no longer constrained by cable length or limited USB ports. Stack multiple interfaces and computers on a network for ultimate scalability and flexibility.

With mioXM, you're able to streamline and expand your MIDI setup, and do it faster, better, and in creative and exciting new ways.

What makes mioXM unique? The iConnectivity difference.

Powerful network MIDI capabilities:

Network connectivity means MIDI wherever you need it. Regular USB connectivity limits you to keeping your interface within 15ft of your computer. Network / Ethernet connectivity gives you up to 330ft / 100m connection between you and your interface.

Drop an interface in every room of your studio, or place an interface virtually anywhere in a venue.

RTP/Network-MIDI is not bound by some of the same restrictions as USB-MIDI.

Easy renaming of network ports - have them show up the way you want them to in your DAW.

Access to more than12 ports per interface.

iConnectivity's unique network technology is as easy to use as USB! Enjoy your new-found MIDI power without extra headaches.

Use your 12 network MIDI ports anyway you want. Connect each of the 12 RTP-MIDI sessions to any combination of physical or virtual I/O ports. Almost any combination is possible.

Configuring mioXM:

Introducing a new version of iConnectivity's Auracle control software: taking the simplicity of workflow that the original Auracle introduced but now with the added deep configuration functionality that iConnectivity become known for. All the deep configuration options you asked for: MIDI merging, filtering, remapping, and deep routing are all there and super easy to use.

Presets onboard:

Need to configure your MIDI setup in multiple ways? No problem!

Store and recall up to 4 presets directly on the interface, without even needing a computer!

Easily recall unique MIDI routing, filter and merging setups to preset scenes, all from the front of mioXM.

What's in the box
1 x mioXM
1 x USB cable
1x Ethernet cable
1 x mioXM 12V 36W Power Power Supply with interchangeable blades (NA, EU, UK and AU (Australia only)).

Device Specifications:

Width: 214 mm/8.43 in
Height (1U): 37 mm/1.46 in
Depth: 140 mm/5.51 in
Weight: 992g/2.13 lbs

mioXM fits comfortably in iConnectivity's iCRS Interface Rack Shelf

System Requirements

Macintosh
Mac OS X 10.11 or greater
1 free ethernet or USB port

Windows
Windows 10 or greater
1 free ethernet or USB port

iOS
iOS 8 or greater with Camera Connection Kit (CCK)*
CoreMIDI compatible app
Read more
 2 in stock $214.75
Apogee Duet 3 2x4 USB Audio Interface (black) (B-STOCK)
Cat: 926906 Rel: 30 Sep 21
 
B-STOCK: Box damaged, product in perfect working order
Notes: ***B-STOCK: Box damaged, product in perfect working order***


Compact but premium 2x4 audio interface from one of the best brands in the business. Superb sound quality with built-in hardware DSP.

Supplier's Notes:
Legendary Sound Quality, Total Portability and Hardware DSP all Come Together in a Beautiful New Design

In 2007, the original Apogee Duet shattered the expectations of what a home studio interface could be. Professional, personal and portable, Duet revolutionised independent recording and empowered musicians, producers and engineers with legendary Apogee sound quality, elegant design and effortless ease of use. Now, the all-new Duet 3 brings next-generation Apogee performance and features to a beautiful ultra-low profile scratch resistant glass and aluminium case.

Duet 3 includes on-board hardware DSP that works with the Symphony ECS Channel Strip* for zero-latency recording with FX. Tuned by Bob Clearmountain, the ECS Channel Strip includes presets custom crafted by the legendary mixer so you can dial in a pro recording sound instantly. Ideal for music creation, voice recording, streaming and even gaming, you can use Duet 3 with your Mac or Windows workstation in your studio or on the go. Take your Duet 3 to the next level with the sleek Duet Dock* accessory for the ultimate ergonomic desktop experience.

Achieving superior sound quality in a digital audio interface requires experienced engineering that artfully orchestrates AD/DA converters, digital clocking, analog circuitry and power management technology to achieve a harmonious blend of carefully selected components and thoughtful design. Duet is the result of decades of innovation and expertise and delivers sound quality unmatched in its class.

Legendary AD/DA Converters

With two inputs and four outputs of legendary Apogee AD/DA conversion, plus two world-class preamps, Duet is the perfect partner for your home and mobile studio. Connect microphones, guitars, keyboard and line level devices to capture every detail. Monitor and mix with the full depth and dimension of your sound through two truly-balanced, line-level analog outputs for speakers. And, power your headphones with a zero-ohm headphone output for a dedicated headphone mix.

World Class Preamps

One of the most critical components for high quality recording is your preamp and the pres in Apogee Duet are world-class. With up to 60dB of gain and 48v phantom power, you can cleanly and precisely capture any audio source with even the most demanding microphones. Meticulous Apogee engineering, keeps noise and distortion down, even as you crank up the gain.

Plug-in to On-board DSP

To capture your best performance, you need to dial in an inspiring sound quickly and easily. And few things are more distracting than latency when trying to record. Duet gives you on-board hardware DSP for FX processing with the Symphony ECS Channel Strip (sold separately) to precisely shape your tone on input and give you great sounding tracks, all while eliminating the delay that can occur while recording. The Symphony ECS Channel Strip, tuned by legendary mixer Bob Clearmountain, includes EQ, Compression and Saturation controls that let you create the optimal blend of channel FX for tracking vocals or acoustic instruments. Choose from multiple hand crafted Clearmountain presets and record with zero latency through Duet's on-board hardware DSP.

Receive 50% off the Symphony ECS Channel Strip from your Apogee dealer when you purchase Duet 3 or when you register on the Apogee website.

The all new Apogee Control 2 software gives you complete control of all Duet functions and features including the Symphony ECS Channel Strip FX running on Duet's hardware DSP. Apogee Control 2 is shared across all current and select previous generation Apogee products and will enable Apogee support and engineering to quickly react to future macOS and Windows OS updates helping to ensure Duet 3 compatibility for your workstation.

Sound quality comes first, but elegant design is a close second. After all, you're always hands-on, controlling listening level and mic pre gain, so why shouldn't the centerpiece of your studio have a high-end look and feel? The Duet multi-function digital controller knob delivers a luxurious-feel for dialing in monitor levels and mic pre gain, while also giving the desktop interface style accents backlit with purple LEDs. Perfectly contoured for ergonomic control on your desktop, the low profile body is topped with scratch-resistant cover glass for a modern look and solid feel.

Duet Dock

Duet set the standard for making music and recording on the go with its small footprint and flexible breakout cable. But when working in your studio, the best way to use Duet 3 is with the all-new Duet Dock*. The Dock positions Duet at the ideal angle for quick adjustments and meter and function visibility. The rear panel connectors on Duet Dock make it easier to organize and connect your cables to Duet too.

*Sold Separately
Read more
 1 in stock $569.43
Apogee Duet 3 2x4 USB Audio Interface (black)
Cat: 834792 Rel: 30 Sep 21
 
Premium USB Audio Interface with On-Board Hardware DSP.
Notes: Compact but premium 2x4 audio interface from one of the best brands in the business. Superb sound quality with built-in hardware DSP.

Supplier's Notes:
Legendary Sound Quality, Total Portability and Hardware DSP all Come Together in a Beautiful New Design

In 2007, the original Apogee Duet shattered the expectations of what a home studio interface could be. Professional, personal and portable, Duet revolutionised independent recording and empowered musicians, producers and engineers with legendary Apogee sound quality, elegant design and effortless ease of use. Now, the all-new Duet 3 brings next-generation Apogee performance and features to a beautiful ultra-low profile scratch resistant glass and aluminium case.

Duet 3 includes on-board hardware DSP that works with the Symphony ECS Channel Strip* for zero-latency recording with FX. Tuned by Bob Clearmountain, the ECS Channel Strip includes presets custom crafted by the legendary mixer so you can dial in a pro recording sound instantly. Ideal for music creation, voice recording, streaming and even gaming, you can use Duet 3 with your Mac or Windows workstation in your studio or on the go. Take your Duet 3 to the next level with the sleek Duet Dock* accessory for the ultimate ergonomic desktop experience.

Achieving superior sound quality in a digital audio interface requires experienced engineering that artfully orchestrates AD/DA converters, digital clocking, analog circuitry and power management technology to achieve a harmonious blend of carefully selected components and thoughtful design. Duet is the result of decades of innovation and expertise and delivers sound quality unmatched in its class.

Legendary AD/DA Converters

With two inputs and four outputs of legendary Apogee AD/DA conversion, plus two world-class preamps, Duet is the perfect partner for your home and mobile studio. Connect microphones, guitars, keyboard and line level devices to capture every detail. Monitor and mix with the full depth and dimension of your sound through two truly-balanced, line-level analog outputs for speakers. And, power your headphones with a zero-ohm headphone output for a dedicated headphone mix.

World Class Preamps

One of the most critical components for high quality recording is your preamp and the pres in Apogee Duet are world-class. With up to 60dB of gain and 48v phantom power, you can cleanly and precisely capture any audio source with even the most demanding microphones. Meticulous Apogee engineering, keeps noise and distortion down, even as you crank up the gain.

Plug-in to On-board DSP

To capture your best performance, you need to dial in an inspiring sound quickly and easily. And few things are more distracting than latency when trying to record. Duet gives you on-board hardware DSP for FX processing with the Symphony ECS Channel Strip (sold separately) to precisely shape your tone on input and give you great sounding tracks, all while eliminating the delay that can occur while recording. The Symphony ECS Channel Strip, tuned by legendary mixer Bob Clearmountain, includes EQ, Compression and Saturation controls that let you create the optimal blend of channel FX for tracking vocals or acoustic instruments. Choose from multiple hand crafted Clearmountain presets and record with zero latency through Duet's on-board hardware DSP.

Receive 50% off the Symphony ECS Channel Strip from your Apogee dealer when you purchase Duet 3 or when you register on the Apogee website.

The all new Apogee Control 2 software gives you complete control of all Duet functions and features including the Symphony ECS Channel Strip FX running on Duet's hardware DSP. Apogee Control 2 is shared across all current and select previous generation Apogee products and will enable Apogee support and engineering to quickly react to future macOS and Windows OS updates helping to ensure Duet 3 compatibility for your workstation.

Sound quality comes first, but elegant design is a close second. After all, you're always hands-on, controlling listening level and mic pre gain, so why shouldn't the centerpiece of your studio have a high-end look and feel? The Duet multi-function digital controller knob delivers a luxurious-feel for dialing in monitor levels and mic pre gain, while also giving the desktop interface style accents backlit with purple LEDs. Perfectly contoured for ergonomic control on your desktop, the low profile body is topped with scratch-resistant cover glass for a modern look and solid feel.

Duet Dock

Duet set the standard for making music and recording on the go with its small footprint and flexible breakout cable. But when working in your studio, the best way to use Duet 3 is with the all-new Duet Dock*. The Dock positions Duet at the ideal angle for quick adjustments and meter and function visibility. The rear panel connectors on Duet Dock make it easier to organize and connect your cables to Duet too.

*Sold Separately
Read more
MRP:$830.62 SAVE 37%
 1 in stock $525.32
Steinberg UR22 MKII Recording Pack Elements Edition (incl Cubase Elements)
Cat: 831815 Rel: 10 Jun 21
 
UR22mkII audio interface, ST-M01 Condenser Microphone, ST-H01 Studio Monitor headphones & XLR Cable
Notes: Steinberg's studio starter bundle includes audio interface, headphones, microphone and a software package to get you started making music or recording podcasts. A studio in a box.
Read more
MRP:$269.50 SAVE 17%
 1 in stock $224.24
MOTU UltraLite MK5 18-In/22-Out USB Audio Interface
Cat: 822546 Rel: 09 Apr 21
 
18x22 USB audio interface with DSP, mixing and effects
Notes: Latest version of an interface that's become a modern classic. Up to 18 audio inputs and 22 outputs in total, spread over a mixture of analogue and digital connections. A true all-rounder that's hard to beat.

Supplier's Notes:
The MOTU UltraLite-mk5 is the latest incarnation of the best-selling UltraLite series (replacing the UltraLite-mk4). It takes the winning formula of the half-rack form factor with 18 in x 22 out analog and digital I/O and adds state-of-the-art enhancements at the same great price :

Best-in-class Audio Quality - the UltraLite-mk5 includes renowned ESS Sabre32 DAC technology, featuring the ES9026PRO DAC, to deliver 125dB dynamic range and -114 dB THD+N.

Ultra-low Latency - optimised Drivers for both Mac and PC deliver ultra-low latency performance. With a high-performance DAW the UltraLite-mk5 delivers an astonishing round-trip latency of 2.4ms (at 96kHz with a 32-sample host buffer

New Design - while retaining the same front and back panel layout as its predecessors the UltraLite-mk5 has a sleek new look, incorporating a high-resolution, high-contrast white OLED display providing precision metering for all analog inputs and outputs, along with digital I/O activity indicators and status info

Connectivity and Compatibility- the UltraLite-mk5 has a USB-C connector and is also class-compliant for operation with iOS devices. It is also compatible with MacOS 11 Big Sur and M1 Macs

New Software and Simplified Monitoring - live monitoring of inputs is controlled via the new CueMix 5 software

Rack-mount options - a half-rack mounting kit (sold separately) allows the steel-encased UltraLite-mk5 to be rack-mounted with thick steel brackets to withstand the punishment of touring. Alternatively, two UltraLite-mk5 units can be joined together with a Half-rack Coupler Kit (sold separately)

Technical Specifications:

Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
Mic/line/guitar inputs: 2 x XLR/TRS "combo" jacks, 1 MO impedance on the line/instr inputs
Analog inputs: 6 x 1/4" TRS line in (balanced)
Analog outputs: 10 x 1/4" TRS line out (balanced, DC coupled)

Digital I/O:
1 bank (8 ch) of ADAT optical at 1x sample rates
1 bank (4 ch) of SMUX optical at 2x sample rates
Switchable to stereo TOSLink (optical S/PDIF)
1 x stereo S/PDIF on RCA (up to 96 kHz)

Computer I/O:
1 x USB-C 2.0 audio class compliant
Compatible with USB Type A (with adapter or C-to-A cable)

Total audio I/O:
18 in / 22 out (40 total) at 1x sample rates
14 in / 18 out (32 total) at 2x sample rates
8 in / 12 out (20 total) at 4x sample rates

MIDI I/O:
1 x MIDI IN
1 x MIDI OUT
16 MIDI channels to/from computer host

Headphone: 1 x 1/4" TRS stereo phone
Phantom power: 2 x individual +48V

Front panel:
2 x XLR/TRS combo inputs
1 x 1/4" TRS headphone output
1 x potentiometer - phone/monitor vol
2 x potentiometer - mic/instr input gain
4 x switches - (2) 48V and (2) pad
1x high-resolution white OLED display for metering/status
Power: External 12-18V DC power supply - 1.0A max - tip pos or neg

Dimensions and weight: (width x depth x height, enclosure only)
8.6 x 6.9 x 1.75 inches
22 x 17.5 x 4.5 cm
2.875 lbs / 1.31 kg
Read more
 1 in stock $629.54
Click for better price!
or call +44 20 7424 1960
quote 822546
IK Multimedia iRig Pre 2 XLR Microphone Interface & Preamp For iOS/Android/Digital Cameras (B-STOCK)
Cat: 829667 Rel: 24 Feb 21
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Updated version of the hugely popular mobile audio interface. Just about as compact as it gets but with all the functionality you'd expect for getting quality sound in and out of mobile devices.

Supplier's Notes:
Make your go-to mic go farther

Like many of today's musicians, YouTubers, and broadcasters you probably rely on the professional sound quality you get from using an XLR microphone. But for mobile, on-the-go audio and video creation, XLR mics present some challenges. Many require phantom power, and at best, using them also means dragging along a laptop and boxy audio interface to get the mic preamps along with the phantom power you need.

iRig Pre 2 is a pocket-sized mic preamp that lets you easily use your XLR mics to record, perform and stream with your iPhone*, iPad, Android device or DSLR camera. The sequel to the best-selling mobile mic pre of all time, iRig Pre 2 delivers the same professional sound you're accustomed to, while adding direct monitoring, auto-switching wiring for use with digital cameras, and so much more.

All powered up

Need phantom power for your condenser mic? iRig Pre 2's 2 AA batteries provide true +48V phantom power (many other mobile mic preamps only offer 32V, degrading your mic's performance) for around 7 hours of continuous use.
To use your favorite dynamic or ribbon mic, simply turn off the phantom power and you're good to go for even longer, up to 20 hours!

Don't waste a take

A time-saving 3.5mm (1/8") headphone output now offers direct monitoring, so you can listen back to ensure the signal is perfect before you start recording or streaming!
It's perfect for all today's popular live-streaming and video recording apps, so you can hop from app to app with confidence you'll always sound your best.
And for DSLRs and digital cameras, it makes set up a snap without needing to dive into menus or set up alternate workarounds to monitor the sound.

Works in more situations

You can easily access your favorite apps while recording or performing by mounting the iRig Pre 2 to your mic stand or other convenient stage locations using the included Velcro strip slot. For secure mic stand mounting for your connected smartphone, tablet or digital camera, be sure to check out our iKlip series, which offers a choice of flexible-mounting options for a variety of scenarios.

Ready to rock, right out of the box

Even if you're new to mobile audio and video creation, you can get started right away by simply downloading two free IK Multimedia apps from the App store or Google Play: iRig Recorder FREE (our easy-to-use audio and video recording/editing app) and VocaLive FREE (our premium vocal processor for live performance and multi-track recording).
So get ready to break out of the box and start exploring the creative possibilities all around you, with the freedom of iRig Pre 2.

The Creator series from IK Multimedia puts you in the spotlight with fast and easy tools to help you create professional content. Its budget-friendly solutions are ideal for YouTubers, podcasters, live streamers and other social media platforms, and include a variety of mobile and studio-friendly microphones, interfaces and smartphone stands. With convenient features and flexible options, you'll be covered wherever and whenever inspiration strikes.

Technical Specifications:

Frequency response: from 20 Hz to 20 KHz +/- 1.5dB
EIN (@gain min): -113.5 dBA
EIN (@ gain max): -92.4dBA
THD+N: -90 dBA / 0,003%
Gain range: 48dB
Phantom max current: 6mA
Battery duration (Alkaline 2xAA): approx 20 hours when phantom is off, approx 7 hours when phantom is on

Includes:

iRig Pre 2
2xAA batteries
Velcro strip
Free apps for iOS and Android

Dimensions:

Size: 40mm/1.57" x 110mm/4.33" x 34mm/1.34"
Weight: 75g/2.65oz (batteries excluded)
Cables length: 40cm/15.75"

Compatibility:

iOS and Android Devices

Compatible with iPhone, iPad, iPod touch and Android devices with 1/8" / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standard.

DSLR Cameras

Compatible with most DSLR cameras equipped with 1/8" / 3.5mm jack microphone input.
Read more
 1 in stock $34.96
150/78(ページ1/2)の商品
1  2  »
Cart subtotal: