安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Audio & MIDI interfaces

ホーム  Equipment  

Audio & MIDI interfaces

Options
14/4(ページ1/1)の商品
Subscribe to our weekly Studio Equipment emails
Cat: 763087 Rel: 08 Jul 20
 
USB audio interface
Notes: IK Multimedia proudly announces AXE I/O SOLO, a new entry in its range of AXE I/Or high-end guitar interfaces with advanced tone-shaping features.

Developed for guitar players who want to record the best possible sound on a budget or on the go, AXE I/O SOLO is a compact 2-in/3-out USB audio interface that features IK's high-end PURE microphone preamp; an instrument input with proprietary tone-shaping options; an exclusive Amp Out to incorporate real gear into a recording setup; and 24-bit, 192 kHz converters with a wide dynamic range, for pristine recordings in all musical genres.

AXE I/O SOLO can also act as a controller for use with IK's included AmpliTuber or other favourite guitar-friendly software, offering a complete, affordable solution for players who want the best possible tone for their tracks.

AXE I/O SOLO offers IK's high-definition, Class A PURE mic preamp, designed for transparent and clean recording. An extended, flat frequency response captures the full tonal range of voices and instruments without colouring the sound. A best-in-class dynamic range ensures ultra-quiet recordings.

Proprietary tone-shaping options let users dial in the perfect settings for their instruments or coax a wider range of tones from a single instrument:

First, an active & passive pickup selector adapts instantly to any instrument. The active channel bypasses unneeded gain stages, ensuring the signal is always as direct and uncoloured as possible.

Next, AXE I/O SOLO offers both a PURE circuit for pristine, transparent sound and a JFET circuit for adding warmth and harmonics, all within a single device.

Finally, IK's proprietary Z-Toner impedance-adapting circuit lets users adjust the input impedance to interact with their guitar's pickups: at the maximum impedance, sounds are tighter, sharper and more precise, and at lower impedances the sound becomes thicker and bolder.

These controls give guitars even more sonic character - with just a few minutes' experimentation, users can dial in a sound that perfectly fits the mix.

AXE I/O SOLO offers a streamlined re-amplification setup in a single box. A front panel Amp Out lets guitar and bass players incorporate real amplifiers and stompboxes without the need for an external conversion box. This low-noise out also eliminates ground loops, to keep even the highest-gain re-amplification as quiet as possible.

AXE I/O SOLO preserves the best-in-class dynamic range, ultra-low self noise and wide, extended frequency response of the original AXE I/O, ensuring premium sound quality for recording both instruments and vocals.

1/4" balanced outputs and a headphones out provide comprehensive connections, and a "blend" knob mixes direct and processed signal for zero-latency monitoring. In addition, AXE I/O SOLO also features two dedicated inputs for controller pedals and switches, plus MIDI In/Out, offering a range of options for real-time control over amp modelling plug-ins or recording software.

For seamless, out-of-the-box recording and processing, AXE I/O SOLO comes bundled with AmpliTube 4 Deluxe, IK's powerful guitar and bass tone studio for Mac/PC/iPhone/iPad, as well as a suite of T-RackS mixing & mastering plug-ins and Ableton Live 10 Lite recording software.
Read more
 5 in stock $261.07
Click for better price!
or call +44 20 7424 1960
quote 763087
Cat: 637341 Rel: 31 Jan 17
 
Advanced digital microphone system for acoustic guitar
Notes: iRig Acoustic Stage is the new hi-tech solution for accurately reproducing the full sound of acoustic guitars and other instruments with studio-quality sound live on stage and in the studio. The combination of its advanced MEMS microphone and hi-quality preamp and DSP processing unit provides - for the first time ever - a break-through solution that offers hi-quality natural sound, advanced features, ease of installation and a convenience never seen before.

Until now, getting your acoustic to sound like it does in the studio when playing on stage has been a difficult, if not impossible, task. Playing an acoustic on stage typically falls into two scenarios: using the on-board piezo or magnetic pickup system to project a fractional representation of your acoustic's natural warm tone, or sitting stationary on stage with microphones in "the sweet spot" on your acoustic, dramatically limiting your ability to move.

It's a compact acoustic microphone and advanced digital preamplifier and processing unit that recreates a studio microphone set-up providing you with all the true character and tonal nuance of your acoustic in live playing situations. Simply clip the iRig Acoustic Stage's microphone to the sound hole, attach it to the iRig Acoustic Stage pre-amplifier processor, then connect the preamp to your amplifier or mixer. iRig Acoustic Stage also features a "Cancel Feedback" button that gets rids of annoying frequency feedback during performance.

Once installed and active, you'll immediately hear what you've been missing with your traditional live setup as your acoustic tone comes alive with vibrance, warmth, depth and earthy, woody tone. If you currently perform with an acoustic-electric, iRig Acoustic Stage can greatly enhance your guitar's live tone. iRig Acoustic Stage features an AUX input with a blend control that lets you blend your guitar's current pickup system with iRig Acoustic Stage giving you even greater tonal flexibility and a roundness to your sound like you've never heard before.

Built for the Stage and Project/Home Studio:
iRig Acoustic Stage provides an enhanced acoustic sound that's perfect for live performance and recording. Getting that "studio" sound in project or home studios with your acoustic is now easier than ever. If you have an audio interface, simply plug iRig Acoustic Stage into the analog input. No interface? No problem! iRig Acoustic Stage also features an integrated class-compliant USB audio output for direct connection to your computer or compatible device. Not only will you get that fantastic sound, but you can also move around freely allowing you to get into the groove and capture your best acoustic performance in your studio.

How does it work:
iRig Acoustic Stage uses a patented system composed by an hi-tech MEMS microphone and a preamplifier / processor that includes an advanced digital signal processing component performing multiple functions, from instrument calibration to EQ, to feedback cancel. The microphone that clips on to the soundhole of the guitar and captures all of the "air", harmonics and sonic nuances of your instrument and playing style that is simply missed with traditional piezo and magnetic pickups. The synergy between the microphone and the 32-bit DSP-based preamp system provides amazingly rich, full-spectrum acoustic sound on stage like never before.

MEMS Microphone:
iRig Acoustic Stage uses an ultra-compact MEMS microphone to capture your acoustic's sound from the soundhole. It can be quickly slid into place in the soundhole of the instrument and easily removed with zero modification to the instrument required. This lets you use iRig Acoustic Stage on all your acoustic steel string guitars, classical nylon strings guitars and even ukuleles or other stringed instruments with a soundhole.

Acoustic Preamp/Built-in DSP:
The magic of iRig Acoustic Stage comes from the combination between the microphone, the preamp and the signal processing unit. iRig Acoustic Stage analyzes the incoming signal from your guitar i both the overall sound and nuance of the instrument AND the playing technique i and builds the optimum tone profile for the instrument that delivers a warm, round and balanced acoustic sound. The tone profile can then be enhanced through the use of 6 selectable tone presets, depending upon the playing situation. iRig Acoustic Stage gives you 3 presets for steel string instruments i natural, warm, bright i and the same 3 optimized for nylon string instruments.

Custom Calibration:
Out of the box, iRig Acoustic Stage is factory calibrated to sound great with most guitars. You can also customize the setup and calibrate iRig Acoustic Stage to optimize the overall response of the DSP specifically for your instrument, making the tone even more authentic and perfect for your guitar. The Custom Calibration feature takes just a few minutes and further refines your tone and responds more accurately to your playing style.
Read more
 1 in stock $85.70
Cat: 540592 Rel: 16 Jul 14
 
Universal MIDI interface for iPhone, iPod touch, iPad and Mac/PC (lightning & USB cables included)
Notes: Introducing iRig MIDI 2, the first Lightning/USB compatible mobile MIDI interface that works with all generations of iOS devices as well as Mac and PC. It features everything you loved about iRig MIDI but with even greater pocketability, connectivity and control. Simply put, it's the perfect MIDI solution for the musician on the move.

As we've said, iRig MIDI 2 is the first portable MIDI interface that's compatible with Apple's Lightning cable. This, however, does not come at the expense of universal support. At the center of iRig MIDI 2 is its detachable Mini-DIN connector, which lets you attach a Lightning (included), USB (included) or 30-pin cable (sold separately) depending on the mobile device or computer that you'd like to use. Now you have the flexibility to use MIDI with whatever device you want, anytime, and anywhere.

iRig MIDI 2 is small, but it can be made even smaller when all of its cables are detached. Because of its Mini-DIN connector, you can remove all cables for extreme portability: Now you have something that you can easily carry with you in your pocket to any gig, performance, studio or jam session. In addition, all iRig MIDI 2 cables are bumper friendly, which means you can connect and start jamming without having to remove your mobile device's protective carrying case

Like iRig MIDI before it, iRig MIDI 2 features three MIDI ports: IN, OUT and THRU. But this time around the ports are standard-sized and require no adaptor or special cable to use - in fact, you can use any standard MIDI cable you'd like. These ports give you all the control and connectivity that MIDI allows: Use the IN port to use external keyboards and controllers to play your favorite software sound modules and synthesizers. Use the OUT port to control external hardware or synthesizers from your mobile device or computer. And you can use the THRU port to send MIDI data to multiple instruments at once. Monitoring MIDI data with iRig MIDI 2 is easy, it comes with two LEDs that give you an at-a-glance readout of the note data as it passes through the IN and OUT ports.

With iRig MIDI 2, you get more than just a supremely portable MIDI interface; you also get a full suite of music creation apps. As soon as you open the box you'll be ready to go. iOS users get two of IK's most popular mobile apps: SampleTank FREE is a sound and groove workstation filled with hundreds of high-quality instruments and patterns. iGrand Piano FREE is a concert-quality piano app that puts world-class piano sounds at your fingertips. And Mac and PC users can enjoy the full creative power of SampleTank 3 SE, a free version of IK's next generation SampleTank 3 desktop sound workstation. Beyond all that's included, iRig MIDI 2 works with all MIDI-compatible Mac and PC software as well as the entire spectrum of Core MIDI apps for iOS such as GarageBand, Cubasis, Beat Maker 2, Auria and many more.

iRig MIDI 2 has been designed and manufactured in Modena, Italy - a city famous for high-performance Italian industrial design. Like all IK products, it's been through rigorous quality testing to ensure the utmost in dependability i iRig MIDI 2 is housed in a durable rubberized enclosure designed to last performance after performance and gig after gig. IK Multimedia uses only the best components, materials and processes to create solid, smartly manufactured products at an affordable price.

(Included/free apps: http://www.ikmultimedia.com/products/irigmidi2/index.php?pp=irigmidi2-app)
Read more
MRP:$107.38 SAVE 39%
! low stock $65.26
Cat: 763092 Rel: 14 Feb 20
 
audio & MIDI interface
Notes: Next-gen version of the popular iRig Pro Duo offers versatile recording options in a compact, portable package. Two mic/line inputs with phantom power, stereo line outputs, headphone out and MIDI in/out.

Supplier's notes:
IK Multimedia introduces the iRigr Pro Duo I/O, an enhanced, ultra-compact 2-channel audio/MIDI interface that enables high-quality recording on the go with iPhone, iPad, Android devices and Mac/PC. Designed for musicians, podcasters and other content creators, it can accommodate a variety of input sources including microphones, MIDI controllers, line-level and high-impedance instruments such as guitars, basses and keyboards, and more. It can also be used as a MIDI interface.

A sequel to IK's acclaimed iRig Pro Duo, the new iRig Pro Duo I/O features updated mic preamps with increased gain, as well as the addition of a USB-C cable to work with all of today's latest devices and new, dedicated PC drivers to ensure optimal performance on laptops and Surface tablets. In addition, refined volume controls with level indicators for more convenient workflow and a new rubberised finish to better stand up to the road, offer the same standard of quality customers have enjoyed from IK's award-winning iRig Pro I/O single-channel interface.

Recording capabilities
Two analogue combo inputs (1/4" / XLR) are provided for connecting and simultaneously recording any combination of dynamic and condenser microphones and instruments (line level or Hi-Z). They are complemented by Class-A preamps, adjustable gain and 48V phantom power. Each channel has its own input gain control for dialling in the perfect amount of input signal for a particular recording.

iRig Pro Duo I/O can also be used as a MIDI interface via MIDI input and output connectors and included breakout cables. Additional connections include two balanced 14" outputs and headphone output.

A direct monitor switch provides latency-free monitoring of direct incoming signal for use with video or streaming apps, or lets users monitor the processed signal returning from their device when recording music or using audio processing apps.

Out-of-the-box performance
iRig Pro Duo I/O runs on USB bus power or 2 AA batteries (or an optional PSU), and includes Lightning, USB-A and USB-C cables to work with any device right out of the box.

Although compatible with any app designed for high-quality digital audio input for recording or creation, iRig Pro Duo I/O comes with free access to over $/€500 of IK software, apps, and in-app material, making it an all-in-one package with everything needed to record, edit, and share great music, podcasts, interviews and more.

About the iRig series
Celebrating its 10th anniversary in 2020, IK's iRig series of interfaces helped define the mobile music-making category. With products designed for guitarists, vocalists, broadcasters and social media journalists, the series makes high quality audio recording accessible to everyone at an affordable price.
Read more
MRP:$265.29 SAVE 18%
 More than 10 in stock $216.86
Click for better price!
or call +44 20 7424 1960
quote 763092
14/4(ページ1/1)の商品

Filter

Audio & MIDI interfaces
DJ機器
Release Date
Featured
Close