MIDIケーブル/アダプター

Notes: This MIDI Adapter enables you to connect MIDI devices that use standard MIDI cables to the stereo minijacks used by 1010music products. The adapter has a male stereo minijack at one end, and a female 5 pin DIN MIDI connector on the other, and is 22 cm/8.5" long. It is also useful as a converter for connecting to other MIDI devices that use a different mapping of MIDI signals to the stereo minijacks.

Notes: A 4 ft Type B MIDI Adapter

This cable enables you to connect MIDI devices that use standard MIDI cables to the stereo minijacks that use the Type B standard. The adapter cable has a male stereo minijack at one end, and a male 5 pin DIN MIDI connector on the other, and is 1.42 meters/4' 8" long. It is also useful as a converter for connecting to other MIDI devices that use a different mapping of MIDI signals to the stereo minijacks.

Early 1010music music products use the Type B mapping of MIDI signals to stereo minijacks. Bitbox mk2 and bitbox micro can use mini TRS Type A or Type B for MIDI inputs. Bitbox micro uses Type B for MIDI outputs.

The diagram to the right shows the numbering of the pins on a MIDI connector and the labels of the connection components of a stereo minijack. Type B products are compatible with cables that use the following mapping of MIDI signals between female MIDI connectors and stereo minijacks.

Notes: A 1m long DIN cable. All 5 pins are connected, so it is suitable for both MIDI and DIN-Sync.

Notes: Dual MIDI adapter

E&F2M

This adapter is simply a 2-in-1 connection of our EX2M and FS2M adapters. If you need both of these functions, you no longer need to buy two separate adapters.
The adapter is intended for use with existing expression pedals, footswitches and sustain pedals.
A conveniently placed pedal with MIDI functionality may be the missing element in your live performances, because it's the guitar or keyboard that's the most important thing in your hands!

For DJs - DJ icon

This adapter will bring your computer and your real-world signal path together. This little box takes the expression and footswitch pedal outputs and converts them to MIDI. Next, the MIDI is transferred to your DAW via a Micro-USB output.

For Guitarists - guitar icon

It can be used to turn pedals on or off in amp simulators or to switch entire sets of sounds.

For Keyboardists - keyboard icon
Use this adapter with an ordinary sustain pedal. We know that playing without a sustain pedal is just not the same thing, and there are situations when you can't connect the pedal to your keyboard or other instruments. With this adapter, thanks to MIDI, you will be able to incorporate the effect into your playing.

Simply connect a standard expression pedal, sustain pedal or footswitch (1-button and 2-buttons) to the adapter and to the USB port and it will be recognised as a MIDI device.

The device is powered from a computer via a USB port and does not require a battery.

Functions (configurable by the software, independently for each switch and expression pedal):

MIDI Channel
MIDI Message Type
Control Change (CC)
Program Change
Pitch Bend Change
Polyphonic Key Pressure (Aftertouch)
Channel Pressure (Aftertouch)
Note On
System Real-Time (Clock, Start, Stop, Continue)
Toggle Mode:
On/Off (2 configurable MIDI values)
Impulse (1 configurable MIDI value)
Toggle Controller/Program number
Up/down Controller/Program number
Toggle Note number
Start/Stop | Continue/Stop
Tap Tempo (MIDI clock)
MIDI Output Range
MIDI parameter value (depends on MIDI Message type, e.g. CC #)
Reversed Mode
Controller/Program parameters (depends on Toggle Mode)
Pedal Calibration
Factory Reset
Requirements:
Desktop or laptop computer with Intel processor and 1GB RAM (2GB recommended)
macOS 10.11 (El Capitan) or later
Windows 8 (64-bit) or later
Linux with Java SE Runtime Environment 10 or later

Technical Specifications

Connections:
Input: 2 × TRS jack socket 14" (6.35 mm) suitable for all standard expression pedals and 1-button and 2-buttons footswitches
Output: Micro-USB socket
Included Accessories: 15 cm USB standard A-type male cable, for connection to any USB port on your computer
Power Source: USB bus
Power Consumption: ~40mA @ 5V
Data Transmission: Class-compliant MIDI over USB
Weight: 47 g (1.7 oz.)
Dimensions: 83 × 40 × 25 mm (3.3" × 1.6" × 1.0")
The adapter is compatible with Windows PC, Linux and Mac computers as well as with iPad Pro (3rd generation) tablets
*The set does not include an expression pedal or a footswitch.

Notes: This solution is dedicated to musicians who want to connect standard expression pedal to their computers.

For Guitarists - guitar icon

From now on you can control the wah-wah effect and any other using an expression pedal. The adapter is a very practical, small device that allows you to use any standard expression pedal to send many different types of MIDI messages to your computer.
Regardless of what guitar you play, Fender, Gibson, Ibanez, or any other, you can use this solution.

For Keyboardist - keyboard icon

If you cannot connect the expression pedal to your instrument, try this adapter. This is another knob moved under the pedal! Now you can control the VST plug-in settings in real-time without using your hands.
Regardless of whether you use Logic Pro X, Pro Tools, Cubase, FL Studio or Reaper, it will be compatible.

Simply connect a standard expression pedal to the adapter and to the USB port and it will be recognised as a MIDI device.
The device is powered from a computer via a USB port and does not require a battery.

Functions (configurable by the software):

MIDI Channel
MIDI Message Type
Control Change (CC)
Pitch Bend Change
Polyphonic Key Pressure (Aftertouch)
Channel Pressure (Aftertouch)
MIDI Output Range
MIDI parameter value (depends on MIDI Message type, e.g. CC #)
Reversed Mode
Pedal Calibration
Factory Reset
Requirements:
Desktop or laptop computer with Intel processor and 1GB RAM (2GB recommended)
macOS 10.11 (El Capitan) or later
Windows 8 (64-bit) or later
Linux with Java SE Runtime Environment 10 or later

Technical Specification

Connections:
Input: TRS jack socket 14" (6.35 mm) suitable for all standard expression pedals
Output: Micro-USB socket
Included Accessories: 15 cm USB standard A-type male cable, for connection to any USB port on your computer
Power Source: USB bus
Power Consumption: ~20mA @ 5V
Data Transmission: Class-compliant MIDI over USB
Weight: 37 g (1.3 oz.)
Dimensions: 78 × 36 × 21 mm (3.1" × 1.4" × 0.8")
The adapter is compatible with Windows PC, Linux and Mac computers as well as with iPad Pro (3rd generation) tablets
*Expression Pedal is not included.

Notes: The adapter is intended for use with existing Footswitch or Sustain pedals.

The conveniently placed pedal with MIDI functionality might just be the missing element in your live performances, because it's the guitar or keyboard that's the most important thing in your hands!

For Guitarist - guitar icon

It can be used to turn on/off pedals in Amp Simulators plug-in or to switch entire sound sets and programs.

For Keyboardist - keyboard icon

Use this adapter for an ordinary sustain pedal. We know that playing without a sustain effect is not complete, but there are instruments and situations when you are not able to connect the pedal to your keyboard. With this adapter, thanks to MIDI, you will incorporate the effect into your playing.

Simply connect the Sustain or Footswitch pedal (with 1 or 2 buttons) to the adapter and USB port and it will be recognized as a MIDI device.

The device is powered from a computer via a USB port and does not require a battery.

Functions (configurable by the software, independently for each switch):

MIDI Channel
MIDI Message Type
Control Change (CC)
Program Change
Toggle Mode:
On/Off (2 configurable MIDI values)
Impulse (1 configurable MIDI value)
Toggle Controller/Program number
Up/down Controller/Program number
MIDI Output Range
Controller/Program parameters (depends on Toggle Mode)
Factory Reset
Requirements:
Desktop or laptop computer with Intel processor and 1GB RAM (2GB recommended)
macOS 10.11 (El Capitan) or later
Windows 8 (64-bit) or later
Linux with Java SE Runtime Environment 10 or later

Technical Specifications

Connections:
Input: TRS jack socket 14" (6.35 mm) suitable for all standard footswitches (with 1 button or 2 buttons)
Output: Micro-USB socket
Included Accessories: 15 cm USB standard A-type male cable, for connection to any USB port on your computer
Power Source: USB bus
Power Consumption: ~20mA @ 5V
Data Transmission: Class-compliant MIDI over USB
Weight: 37 g (1.3 oz.)
Dimensions: 78 × 36 × 21 mm (3.1" × 1.4" × 0.8")
The adapter is compatible with Windows PC, Linux and Mac computers as well as with iPad Pro (3rd generation) tablets
*Footswitch is not included.

Notes: Most expression pedals have the ability to reverse the polarity of the connection to be compatible with the widest range of devices, but some of them, such as the Yamaha FC7 do not have such a switch, therefore they can only work with some instruments.

The EX2M Adapter is designed to work with standard pedals. However, you can additionally use the TRS Polarity Adapter to make it compatible with reverse polarity pedals, such as the Yamaha FC7 or the Zoom FP02M.

Technical Specifications:

Input: TRS jack 14" (6.35 mm) female connector
Output: TRS jack 14" (6.35 mm) male connector
Cable length: 10 cm

Notes: A High quality MIDI cable for connecting music controllers and devices together. Strong and flexible cable with low loss conductors and global shielding ensure a clean data stream. Terminated at each end with a 180 degree 5 pin DIN plug.

Notes: A high quality MIDI cable for connecting music controllers and devices together. Strong and flexible cable comes with low loss conductors and global shielding ensure a clean data stream. It is terminated at each end with a 180- 5-pin DIN plug.

Notes: The high quality MIDI cable from Chord is for connecting music controllers and devices together. Strong and flexible cable with low loss conductors and global shielding ensure a clean data stream. It is terminated at each end with a 180 degree 5 pin DIN plug.

Notes: High quality MIDI cables for connecting music controllers and devices together. Strong and flexible cable with low loss conductors and global shielding ensure a clean data stream. Terminated at each end with a 180- 5-pin DIN plug.

Notes: WIDI Master is your virtual MIDI cable.
Bluetooth MIDI is the new wireless standard as approved by the MMA.
Now you can connect all your MIDI devices - without computers - without cables - with MIDI over Bluetooth!

Smart Connectivity Algorithms
WIDI distinguishes itself from any other Bluetooth MIDI technology available through its unique SCA technology. SCA is a collection of highly effective algorithms that optimise the performance of WIDI in any given situation. SCA stands for Dual Role Automation, Automatic Pairing Mode, Smart Hub Functionality, Latency Reduction Optimisation and Range Performance Optimisation!

Point to point BLE MIDI connectivity
Simply replace your MIDI cables- rearrange your studio and enjoy the freedom of WIDI.

Bluetooth 5: Go Faster, Go Further
Trusted technology for live and on stage- secure connection with twice the speed and four times the range

Ultra low latency
Go pro with ground-breaking latency reduction as low as 3ms- Smart algorithmic transmission optimization

Automatic pairing
Setup instantly. Operate easily.
Automatic master/slave switch and automatic paring.

MIDI Clock and SysEx
Sync your drum machines, step sequencers and arpeggiators- transmit all MIDI messages over Bluetooth

Detachable design
Only connect what you need- separated adapter design for MIDI OUT only

Versatile application
Connect with even the rarest instruments- 45 degree bridge cable design for vertical DIN connector setup

No external power
Enjoy the fully standalone wireless solution- supports both 5V and 3.3V via MIDI OUT DIN

Lifetime updates
Always benefit from the latest developments- new features updatable via using WIDI App (iOS/Android)

Wireless upgrade via Bluetooth
The easiest way to upgrade your firmware- firmware upgradeable by air via WIDI application software for Android & iOS.

What can you do with MIDI over Bluetooth?
Fully Standalone. Completely Wireless. 100% MIDI.

MIDI to MIDI
Connect two standalone MIDI hardware devices with two (2) WIDI Masters.

Bluetooth (BLE) to MIDI
Pair your bluetooth MIDI controller with any standalone MIDI hardware device using one (1) WIDI Master.

MacOS/iOS BLE to MIDI
Play your standalone MIDI hardware and pair it with your iOS device or Mac with one (1) WIDI Master using smart auto switch mode. About Windows/Android.

Specifications

Wireless technology
Bluetooth 4/5, MIDI over Bluetooth Low Energy-Compliant

Connectors
1x MIDI IN (5pin-DIN)
1x MIDI OUT (5pin-DIN)

Switch, indicator
1x switch, 1x Multicolor LED

Compatible devices
WIDI Master, WIDI BUD, Bluetooth MIDI controllers, iPhone/iPad/iPod Touch, Mac with Bluetooth 4.0 or later

Compatible OS
iOS 8 or later, OSX Yosemite or later

Firmware update
By air using WIDI App (iOS/Android)

Power supply
5V/3.3V compatibility MIDI OUT DIN

Power consumption
37 mW

Dimensions
Main: 21mm (W) x 21mm (H) x 49mm (D)
Sub: 18mm (W) x 18mm (H) x 24mm (D)

Notes: Male 3.5mm (1/8") TRS to Female 5-pin DIN adapter.

This adapter cable will connect the Organelle M's TRS-MIDI In or Out ports to another device with a 5-pin DIN MIDI port.

This adapter cable is TRS-MIDI Type A as set by the MIDI Manufacturers Association. Type A is the adopted standard of the MMA.

Overall length: 10.25" (~26cm)

Notes: The BlueDot MIDI cables are a unique design that allows for flexible angle of the contact that is desirable when space is limited.

Flip the angle of the contact 90 degrees either way or leave it straight. A blue bracket attaches the cable to the angled positions with a click.

The flat cable design fit within the EBS unmatched space-saving accessories program.

Flexible contact angle.

Flat cable design.

Notes: The BlueDot MIDI cables are a unique design that allows for flexible angle of the contact that is desirable when space is limited.

Flip the angle of the contact 90 degrees either way or leave it straight. A blue bracket attaches the cable to the angled positions with a click.

The flat cable design fit within the EBS unmatched space-saving accessories program.

Flexible contact angle.

Flat cable design.

Notes: The BlueDot MIDI cables are a unique design that allows for flexible angle of the contact that is desirable when space is limited.

Flip the angle of the contact 90 degrees either way or leave it straight. A blue bracket attaches the cable to the angled positions with a click.

The flat cable design fit within the EBS unmatched space-saving accessories program.

Flexible contact angle.

Flat cable design.

Notes: Black 2m heavy duty 4 core screened 5-pin MIDI plug to 5-pin MIDI plug.

Notes: Black 2m heavy duty 4 core screened 5-pin MIDI plug to 5-pin MIDI plug.

Notes: Black 2 m Heavy Duty 4 Core Screened 5 Pin Midi Plug to 5 Pin Midi Socket, supplied in bag and header packaging.

Notes: Professional 5 Pin din plug to 5 pin din plug Midi lead with screened cable.

Notes: Professional 5 Pin din plug to 5 pin din plug Midi lead with screened cable.

Cable required: Heavy duty 4 core screened
Lead Length (m): 3
Colour: Black
Connector Type: 5 Pin DIN Plug/5 Pin DIN Plug
Type: Standard
Product dimensions: 140 x 60 x 30
Net weight (kg): 0.1

Notes: The white 1.2m heavy duty 4 core screened 5-pin MIDI plug to 5 pin MIDI plug is designed to use with most MIDI products such as keyboards, lighting controllers etc..

Notes: The MIDI adapter has a male 3.5mm TRS minijack at one end, and a female 5 pin DIN MIDI connector on the other, and is 22 cm/8.5" long.

Notes: Breakout converter to use E-RM masterclocks with a modular synth. Converts between DIN sockets and clock/reset/start/stop 3.5mm jacks and vice versa.

Notes: The low-cost, high-quality Hosa MIDI cable is designed to interconnect MIDI devices. Unlike other cables, the Hosa MIDI cable is wired 5-pin discrete and compatible with all MIDI standards, including SysEx. These durable MIDI cables come in several lengths, from 1 foot to 25 feet, so you can get the right length for your needs.

Features include:

Nickel-plated plugs for rugged durability and efficient signal transfer
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shield for effective EMI and RFI rejection and flexibility

Connectors: 5-pin DIN to Same
Color: Black

Notes: This cable is designed to interconnect MIDI devices. It is wired 5-pin discrete and compatible with all MIDI standards, including SysEx. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shield for effective EMI and RFI rejection and flexibility

Connectors: 5-pin DIN to Same
Colour: Black

Notes: 3 ft long DIN to DIN MIDI cable. (red)

Notes: This cable is designed to interconnect MIDI devices. Right-angle connectors on both ends allow easy access to MIDI ports with minimal clearance.

Notes: This cable is designed to interconnect MIDI devices. It is wired 5-pin discrete and compatible with all MIDI standards, including SysEx. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shield for effective EMI and RFI rejection and flexibility

Connectors: 5-pin DIN to Same
Colour: Black

Notes: 5 ft long DIN to DIN MIDI cable, with right angled connectors.

This cable is designed to interconnect MIDI devices. Right-angle connectors on both ends allow easy access to MIDI ports with minimal clearance.

Connectors: Right-angle 5-pin DIN to Same

Notes: This cable is designed to interconnect MIDI devices. It is wired 5-pin discrete and compatible with all MIDI standards, including SysEx. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shield for effective EMI and RFI rejection and flexibility

Connectors: 5-pin DIN to Same
Colour: Black

Notes: This cable is designed to interconnect MIDI devices. It is wired 5-pin discrete and compatible with all MIDI standards, including SysEx. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shield for effective EMI and RFI rejection and flexibility

Connectors: 5-pin DIN to Same
Colour: Black

Notes: This cable is designed to interconnect MIDI devices. It is wired 5-pin discrete and compatible with all MIDI standards, including SysEx. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shield for effective EMI and RFI rejection and flexibility

Connectors: 5-pin DIN to Same
Colour: Red

Notes: This cable is designed to interconnect MIDI devices. It is wired 5-pin discrete and compatible with all MIDI standards, including SysEx. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shield for effective EMI and RFI rejection and flexibility

Connectors: 5-pin DIN to Same
Colour: Black

Notes: High quality 2.5mm / 3/32" TRS to 5-pin DIN MIDI cable for iRig Pro, iRig Pro Duo, Rig MIDI.

- 150cm / 59"

Notes: 2.5mm TRS male to 5-pin DIN MIDI female adapter for UNO Synth & UNO Drum - 10cm / 3.9". Also suitable for other MIDI interfaces using 2.5mm TRS to 5-pin DIN MIDI.

Notes: Mini DIN female to male extension cable, suitable for: iRig Stomp I/O, iRig Keys I/O & iRig Pro I/O.

Notes: re-Discover your iconic machines thanks to the re-Connect MIDI cable. No computer, no external box needed. Plug the re-Connect cable to your Joue and it will send native MIDI messages without latency.

Notes: The Keith McMillen Instruments CV Cable Kit is designed for converting MIDI messages to control voltages. The kit makes it possible to connect a QuNexus USB MIDI controller to external hardware that accepts a CV voltage such as an analog synthesizer. The kit consists of one right angle 1/8" stereo to 1/4" stereo interconnect cable, one 1/8" stereo to 1/4" mono interconnect cable, one 1/8" TRRS to dual 1/8" stereo interconnect cable, and two 1/8" stereo to dual 1/8" mono interconnect cables.

In the box:
- Keith McMillen Instruments CV Cable Kit
- Right Angle 1/8" Stereo to 1/4" Stereo Interconnect Cable
- 1/8" Stereo to 1/4" Mono Interconnect Cable
- 1/8" TRRS to Dual 1/8" Stereo Interconnect Cable
- 2 x 1/8" Stereo to Dual 1/8" Mono Interconnect Cables
- Limited 1-Year Warranty

Notes: All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Notes: All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Notes: Replacement O Coast MIDI cable with DIN connector and 3.5 mm TRS jack.

Notes: 3 metre long 5 pin DIN MIDI cable in Blue

Notes: 50cm long DIN to DIN MIDI cable (red)

Notes: 75cm long DIN to DIN MIDI cable (black)

Notes: 1.8 metre DIN to DIN MIDI cable (blue)

Notes: 1.8 metre long DIN to DIN MIDI cable (red)

Notes: 1 metre long DIN to DIN MIDI cable (red)

Notes: 12ft long DIN to DIN MIDI cable

Notes: 25 ft long DIN to DIN MIDI cable