安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Effects pedals

ホーム  Equipment  

Effects pedals

Options
150/52(ページ1/2)の商品
1  2  »
Subscribe to our weekly Studio Equipment emails
Earth Quaker Devices Afterneath V3 Enhanced Otherworldly Reverberator Pedal
Notes: Giant ambience from this cleverly designed reverb pedal. Straightforward, intuitive approach with a clever 'drag' control to spread out and separate the individual digital delay lines.

Supplier notes:
The Afterneath sounds a lot like it looks - a wizard bursting forth from ethereal cave and ready for the ambient battle.

Once inside the cave, a reflection of light from an unknown source catches your eye, and you notice a bizarre sheen on the walls of the cave. You timidly inch closer to the walls of the cave. Placing your hand gently on the cavern wall, you feel the rock move. The cave is alive! Alarmed, you emit a loud gasp, which reverberates throughout the subterranean landscape. Upon further listening, it appears as though the reverberations of your voice are in fact a swarm of short digital delays which may be used to create wild and cavernous reverbs, or scattered, short, rhythmic delays with bizarre characteristics.

Take a moment to consider your Intelligence and Wisdom scores, as well as your spell inventory before proceeding further. You have seven spells at your disposal.

Will you cast "Length," which controls the decay length of the reverb?
What about "Diffuse," which adjusts the spread of the reverb? With your wand (or just the knob) turned counterclockwise, the reverb is sharper with more attack, resulting in a stuttering sputter of individual early reflections. Clockwise casts a washy, more ambient-sounding hex.

Overwhelmed by fear, you hastily cast "Dampen!" As you shout the incantation, you notice that a counterclockwise variation of this spell results in brighter tones, while as you rotate your wand clockwise; you hear darker tones with a mellower top-end. It's almost as if your magic changes the hardness of the cavern walls, and thus the tonal characteristics of the reverb!

Elsewhere in your book of magic is "Drag," which separates the individual digital delay lines, literally dragging them through the very fabric of time and space towards an unknown event horizon from which they may never return. Clockwise "Drag" positions will gather the delay lines close together for a more reverb-like effect. Turn the "Drag" counterclockwise, and the delay lines will begin to pull apart for a scattered ping-pong delay effect.

The Drag can be put under voltage or expression control using the "EXP" jack located on the side and operates in 9 different modes which are selected by the small "Mode" control. These modes are: Unquantized, Unquantized with slew, Unquantized volt/octave,
Chromatic scale, Major scale, Minor scale, Pentatonic scale, Octaves & fifths and Octaves. These modes drastically change the way the Drag control functions, especially while using an expression control or CV.

The "Reflect" alters the depth of the cave, and with it the regeneration of the reverb. This acts as a feedback control and will self-oscillate if cast by a high-level user. Turn clockwise for more wash and echoes, counterclockwise for less.

Finally, the "Mix" alters the alchemical balance between the input signal and the effect. The Afterneath does not go fully wet but does lower the level of the input signal as you raise this control to create the appearance of a fully wet reverb.

Modes
The Modes control changes the way the Drag control functions. The LED will change colors indicating which mode you are in.

1. Unquantized: Smooth, unquantized response over the operating range

2. Unquantized with Slew: Smooth, unquantized response over the entire operating range, but with a musical slew that is reminiscent of turning the varispeed knob on a vintage British tape delay. The "Drag" will lag behind the knob or cv changes, but then quickly catch up.

3. Unquantized Volt/Octave: Smooth and unquantized, yet scaled to align with the 1v/octave curve to allow melodic modulation of audio in the buffer, or control the frequency of self-oscillation like a voltage controlled oscillator.?

4. Chromatic Scale: Quantized 1v/octave to the chromatic scale?

5. Minor Scale: Quantized 1v/octave to the minor scale?

6. Major Scale (Lydian): Quantized 1v/octave to the major scale (Lydian)?

7. Pentatonic Scale: Quantized 1v/octave to the pentatonic scale?

8. Octaves & Fifths: Quantized 1v/octave to omit all but octaves and fifths?

9. Octaves: Quantized 1v/octave to omit all but octaves

Specifications:

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 100 mA

Input Impedance: 1 MO

Output Impedance: 500 O
Read more
MRP:$260.13 SAVE 17%
 2 in stock $216.77
Click for better price!
or call +44 20 7424 1960
quote 781148
Earth Quaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Pedal
Cat: 781595 Rel: 28 Jul 20
 
Stereo reverb & delay pedal
Notes: The Avalanche Run is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in our precious Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that's just the beginning...

1. Time: This controls the delay time and goes from 0ms to just under 2000ms.

2. Repeats: Controls the regeneration of the delay, from zero repeats to near infinite.

3. Tone: Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right and get a flat response in the middle.

4. Mix: The is the volume control for the delay line. This blends in the wet with dry until 1 o'clock, 1 o'clock to 3 o'clock boosts the wet signal over the dry and 3 o'clock up brings down dry until it is fully wet when all the way up.

5. Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls.

Decay: Controls the reverb decay length

R Mix: Controls the reverb mix

Time: This takes over for the delay time control and is DRASTICALLY different than the interface control. Using the expression pedal to control the time will give you all kinds of wild effects that can not be achieved by turning the knob.

Repeats: Controls the delay repeats

D Mix: Controls the delay mix

Toggle: This takes over for the toggle switch and will cross fade from forward delay in heel down position to reverse delay in toe down position.

6. Ratio Selector Switch: Selects delay subdivisions when time is set by the "Tap" switch.

1/1: Quarter Note

3/4: Dotted 8th

2/3: Quarter Note Triplet

1/2: 8th Note

1/3: 8th Note Triplet

1/4: 16th Note

7. Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.

8. Toggle Switch (Mode Selector)

Normal: This is the standard delay and reverb mode

Reverse: This is reverse delay mode with standard reverb

Swell: This is the volume swell mode

9. Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 O'clock, 1 O'clock to 3 O'clock boosts the wet signal over the dry and 3 O'clock up brings down dry until it is fully wet when all the way up.

The expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper.

Using a Moog expression pedal, with the output adjustment knob all the way up, is recommended. Any other expression pedal is not guaranteed to work with the Avalanche Run.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

For best results, please use the included 9v center-negative 1-amp DC power supply.

Dimensions: 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs
Current Draw: 410 mA
Input Impedance: 1 MO
Output Impedance: 100 O
Read more
MRP:$424.84 SAVE 24%
 1 in stock $324.62
Earth Quaker Devices Cloven Hoof V2 Fuzz Grinder Pedal
Cat: 781610 Rel: 28 Jul 20
 
Fuzz grinder pedal
Notes: The Cloven Hoof is the Hoof's evil twin. It looks a lot like the Hoof, only more, um . . . Cloven.

The tightness and clarity you loved about the Hoof has been kept, along with the wide range of fuzz sounds, and the rest was thrown away. NOS Germanium transistors? Nope! In their place, a set of four specially selected Silicon transistors were installed for cleaner cleans, higher gain, improved temperature stability, and a grittier, grindier, nastier fuzz tone with over 4x the gain of the original Hoof. The key resistors were replaced with with NOS Carbon Comp components to sprinkle a little bit of vintage flavor into the Cloven Hoof's searing fuzz fury. It's like they always say, "In with the old, out with the new".

The Tone and Shift controls remain intact, only now they're re-voiced for a smoother sweep, and more precise control over the Cloven Hoof's beefy low-end. Speaking of low-end, have you heard this thing on bass? Wow. Try the Cloven Hoof on a bass guitar. Seriously- you can still cut or boost the mids, and there's still a metric ton of output on tap, just do us a favor, and for the love of all that's Cloven, play this pedal with a bass guitar.

Controls:
1. Shift: This adjusts the mid content. Clockwise for scooped mids,
counterclockwise for boosted.

2. Tone: Bass to the left. Treble to the right

3. Level: Use this control to make the Cloven Hoof louder or quieter.

4. Fuzz: Clockwise for heavy, counterclockwise for light.

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 14 mA
Input Impedance: 150 kO
Output Impedance: <10 kO
Read more
MRP:$228.76 SAVE 23%
 1 in stock $176.18
Earth Quaker Devices Data Corrupter Modulated Monophonic Harmonizing PLL Pedal
Cat: 781617 Rel: 28 Jul 20
 
Harmonizing pedal
Notes: The Data Corrupter is a monophonic analog harmonizing PLL with modulation. It takes your input signal and brutally amplifies it into a crushing square wave fuzz tone that is then multiplied, divided and modulated to create a wild, yet repeatable, three-voice guitar synthesizer.

The Master Oscillator is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. It feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2) for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, then the Data Corrupter will perform its calculations and spit out an analog synthesized frequency, which can be pitch-bent for portamento or vibrato sounds by the Frequency Modulator! From there, you can blend in one of eight Subharmonic intervals up to three octaves below the input and mix in a square wave fuzz tone for maximum data corruption.

The Master Oscillator (1) is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. The three-position switch on the Master Oscillator control panel labeled Root (2) feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2). Use the Master Oscillator's Root Switch to fine tune the Data Corrupter's tracking response for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, the Data Corrupter will perform its calculations and spit out a synthesized frequency, the octave and/or interval of which may be selected via the Master Oscillator's eight-position rotary switch.

The Voice Mixer's Oscillator Control (3) adjusts the Master Oscillator blend.

The Frequency Modulator (4) applies pitch-bend modulation to the Master Oscillator. In Glide mode, you'll hear a smooth portamento as each note slides into the next. In Vibrato mode the pitch modulates up and down for a retro sci-fi laser effect.

The Subharmonic (5) assimilates the input signal into one of eight lower octave programs between one and three octaves below the original. For a more stable lower octave, set the Subharmonic's Root Switch to the Unison position, which divides the Square Wave input signal, and removes the Frequency Modulator from the Subharmonic signal path.

To unleash the cracked machine lurking within the mainframe, set the Subharmonic Root Switch to Oscillator and try not to look away as the sonic malware you just installed mangles your input signal into the sum and difference of both the Master Oscillator and Subharmonic with the Frequency Modulator applied to the upper and lower octaves.

If you think you're brave enough, set the Subharmonic Root Switch to Oscillator and try experimenting with different Master Oscillator and Subharmonic programs to wind up the doomsday clock and inch ever closer to the Singularity. Adjust the Voice Mixer's Subharmonic Control to set the lower octave volume.

Finally, (or is it?) the Square (6) control located top-left on the Voice Mixer blends in a fuzzed-out square-wave take of your input in its original octave.

The heart of this pedal is based around a CMOS Phase Locked Loop (PLL) IC. In a nutshell, the PLL takes your input signal and compares its phase and frequency against an oscillator, generates an output proportional to their difference then feeds it back to the oscillator. This then causes the oscillator to lock onto the input signal and generate a synthesized frequency. Pretty cool, right? This synthesized frequency is referred to as the Master Oscillator on the Data Corrupter.

This device takes its inspiration from the Electrax Synthax and the "Basic Frequency Synthesizer" by Ray Marston. Neither of these were really intended to be guitar effect pedals and a lot of work went into creating the Data Corrupter to provide excellent tracking and long sustain. We think you'll find it more expressive and accurate than pretty much any other PLL based effect pedal around.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Dimensions: 5.65 x 4.75 x 2.25 in. (144 x 121 x 57 mm) with knobs
Read more
MRP:$299.35 SAVE 21%
 1 in stock $236.38
Earth Quaker Devices Disaster Transport SR Advanced Modulated Delay & Reverb Machine Pedal
Cat: 781635 Rel: 28 Jul 20
 
Reverb & modulation delay pedal
Notes: The Disaster Transport SR is a dual delay with reverb and modulation. It was designed from the ground up to create an intense wash of lo-fi swirling tape styled echo. While it may look intimidating at first glance, it's actually pretty easy to navigate. The top row of controls are for delay A and the bottom row of controls are for delay B. Delay A is a 600ms delay with modulation and delay B is a 300ms delay with reverb. Both delays can be run separately, in parallel, in series or in series/parallel. To take it one step further, there are also expression controls for the repeats on delay A as well as bleeding delay A into delay B. The switching was designed so each delay can be used individually or in tandem with both true bypass or trails.

In addition to being used as a straight delay, straight reverb, rhythmic delay, modulated delay and old school tape-style echo, the Disaster Transport SR can also be used to create a wide variety of wild sounds ranging from warped records, clanging flange, smooth chorus, echoed out squalls and various other-worldly effects that will blow your mind, man. If you are a fan of old school tape delay and crazy lo-fi sounds, you will get hours of enjoyment every time you plug into the Disaster Transport SR.

The controls for delay A and B are separated by row. The top row is for delay A and the bottom row is for delay B.

Time: Controls the delay time from about 30ms up to 600ms.

Repeats: Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation. This can also be controlled via an expression pedal. The Moog EP-2 is recommended.

Mix: Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when it's above unity.

Depth: Controls the intensity of the modulation, from no modulation to all out seasick pitch bends.

Rate: Controls the rate of the modulation. The LED for delay A flashes in time with the modulation to visually show where the rate is set.

Bleed: This feeds delay A into delay B, post reverb (see block diagram for visual explanation). Use this control for series or series/parallel operation to create rhythmic repeats, extra long delay time or an all out echo wash. This can also be controlled via an expression pedal. The Moog EP-2 is recommended. When using the bleed, experiment with the repeat controls on each delay line. Try using them in different settings, both together and individually, for different timing and textures.

Delay B Controls
Reverb: Controls the amount of reverb added to the input of delay B.

Mix: Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when it's above unity.

Repeats: Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation.

Time: Controls the delay time from about 30ms up to 300ms.

The switches for both delays switch the inputs only. The outputs are always connected. This allows you to have trails by always leaving the bypass switch engaged or to use the bypass switch as the master on/off for true bypass. Additionally, you can feed delay A in to delay B with the bleed control without having delay B switched on for a cleaner rhythmic delay.

Tech Specs:

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs
Current Draw: 107 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$417.00 SAVE 25%
 1 in stock $313.71
Earth Quaker Devices Dunes V2 Mini Mega Ultimate Overdrive Pedal
Cat: 781639 Rel: 28 Jul 20
 
Overdrive pedal
Notes: Dunes is a condensed take on our highly popular Palisades "808-style" overdrive. All the glitz and glamour of the original Palisades has been stripped away, leaving only the bare essentials required for a rippin' mid-boosting transparent overdrive. It has all the great tone of the grown-up Palisades but with a simplified interface and a smaller footprint!

The Dunes features the same Gain, Tone and Level controls as the Palisades, along with Earth Quaker's favoured voice and bandwidth settings, as well as the Normal/Bright toggle. The selectable clipping Voices are: MOSFET for a tight crunchy sound (Palisades' Setting 3); Silicon Asymmetrical clipping for tighter light gain OD closest to the classic 808 sound (Palisades' Setting 4), and None, which goes from clean boost to gritty, pure op-amp distortion with a massive volume boost (Palisades' Setting 1). The two Bandwidth settings are Stock for the classic tone (Palisades' Setting 3) and Full Range for more low end (Palisades' Setting 5).

Controls:
1. Tone: Brighter clockwise, warmer counterclockwise

2. Voice: MF- MOSFET diode clipping, N- No diode clipping, Si- Silicon diode clipping

3. Gain: Adjusts the drive, dirtier clockwise, cleaner counterclockwise

4. Normal/Bright: Normal is a warm full tone, Bright is livelier tone with more chime

5. Volume: Sets the output level

6. Bandwidth: Left is brighter with more emphasis on the mids, right is full range for more low end

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies, are a;ways recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 16 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$254.90 SAVE 17%
 1 in stock $212.42
Click for better price!
or call +44 20 7424 1960
quote 781639
Earth Quaker Devices Grand Orbiter V3 Phase Machine Pedal
Cat: 781668 Rel: 28 Jul 20
 
Phase machine pedal
Notes: Grand Orbiter is a 4 stage OTA-based phaser with a diverse feature set that can go from stationary and resonant to slow and mellow and on through fast and swirly. It has three way toggle switch to select between the ranges of modulation. The master Rate control fine tunes the speed of the LFO in each of these modes and the flashing red LED acts as a visual indicator, even when the effect is in bypass mode. The Depth control blends the shifted signal in with the dry signal and controls the intensity of the effect. The Sweep control governs the peak frequency of the phased signal's tone, turned full clockwise the sweep is lively and intense, whereas turning counter clockwise yields a darker, more laid back peak. The Resonance provides a wide range of control over regeneration and at higher settings adds a more pronounced and resonant tone. You can also use the Grand Orbiter as a true pitch vibrato with the "Phase/Vibrato" switch. When in "Vibrato" mode, the dry signal is removed and the Depth controls acts as a volume control. This pedal is 100% analog, true bypass and built by entirely by hand in beachy Akron, Ohio.

1. Sweep: Controls the frequency peak of the sweep. Higher peak clockwise, lower peak counter clockwise.

2. Rate 1,2,3: Changes the range of the speed control. Rate 1 is slow mode, Rate 2 is LFO kill to use the Orbiter as a fixed resonant filter, Rate 3 is fast mode.

3. Rate: Controls the speed of the LFO. Faster clockwise, slower counterclockwise.

4. Depth: Controls the amount of phase effect mixed with dry signal. Clockwise for more intense phasing, counterclockwise for less. In "Vibrato" mode, this acts as a volume control.

5. Phase/Vibrato: Cuts the dry signal to create a vibe/vibrato effect depending on the setting of the other controls. Vibrato is created by turning the resonance down low.

6. Resonance: Controls the regeneration of the phased signal. More resonant clockwise, more subtle counterclockwise.

Tech Specs:

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 15 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$260.13 SAVE 25%
 1 in stock $195.00
Earth Quaker Devices Night Wire V2 Harmonic Tremolo Pedal
Cat: 781691 Rel: 28 Jul 20
 
Tremolo pedal
Notes: Really clever and creative approach to tremolo effects here: the signal is split into high and low frequencies, then the signals are modulated with low-frequency oscillators for funky, organic movement.

Supplier notes:
The Night Wire is a feature-rich harmonic tremolo. What is harmonic tremolo? In short, the signal is split into high pass and low pass filters, then modulated with an LFO that is split 180 degrees. The Night Wire takes the traditional harmonic tremolo a few steps further by allowing the center point of both filters to be adjusted for different tones. The filter frequency has three modes: Manual, LFO and Attack. In Manual mode, the center point can be set to a fixed position with the frequency control. In LFO mode, the filters are continuously swept and the frequency control adjusts the speed. In Attack mode, the filters are dynamically swept according to pick attack and the frequency control acts as a range control, much like a standard envelope filter. The tremolo section has two modes, Manual and Attack. In Manual mode, the speed of the tremolo is governed by where the rate control is set. In Attack mode the speed is controlled by pick attack and the rate controls the sensitivity; the harder you pick, the faster the rate and vice-versa. The tremolo can be subtle and shimmery or full-on throbbing depending on where the depth control is set. With the depth set to zero, the Night Wire will act like a fixed filter, phase shifter or envelope-controlled filter depending on which mode the filter frequency is in. It also features a cut/boost volume control to get your levels just right.

Controls:
1. Depth: Adjusts the depth of the tremolo. More clockwise, less counterclockwise. When fully counterclockwise, the amplitude modulation will be removed and the Night Wire will function as a fixed filter, envelope controlled filter or phaser depending on where the Frequency toggle is set.

2. Rate Toggle: This toggle lets you select between two ways to control the speed of the tremolo. Attack lets you adjust the speed by pick attack. In this mode, the Rate knob controls the sensitivity of the dynamic tremolo. The higher the rate and harder you pick, the faster the speed will rise and vice versa. In Manual mode, the Rate control adjusts the speed like a common tremolo.

3. Rate: In Manual mode, this controls the speed of the tremolo. Faster speed clockwise and slower speed counterclockwise. In Attack mode, this controls the sensitivity of the dynamic tremolo. The higher the Rate and harder you pick, the faster the speed will rise and vice versa.

4. Level: Sets the output level, unity is around noon.

5. Frequency Toggle: This toggle lets you select one of 3 different ways to control the center frequency of the filter section. In LFO mode, the frequency is continuously swept by an LFO. In this mode, the Frequency knobs adjusts the speed of the LFO. In Manual mode, the frequency is determined by where the Frequency knob is set. In Attack mode, the center frequency is dynamically controlled by pick attack and the Frequency knob adjusts the sensitivity.

6. Frequency: Controls the center frequency of the filters in Manual mode: higher clockwise, lower counterclockwise. In LFO mode this controls the rate of the sweep: faster clockwise and slower counterclockwise. In Attack mode this controls the sensitivity of the envelope: lower Frequency gives slower rise and lower peak, higher Frequency gives faster rise and higher peak. Simple, right?

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 65 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$260.13 SAVE 17%
 1 in stock $215.40
Click for better price!
or call +44 20 7424 1960
quote 781691
Earth Quaker Devices Space Spiral V2 Modulated Delay Device Pedal
Cat: 781722 Rel: 28 Jul 20
 
Delay pedal
Notes: The Space Spiral is a dark and dreamy modulated delay designed to take you across the highways of fantasy. While the delay may be designed around a "dawn of digital" echo processor, the sound is out of this world, man. If you are a fan of the dreary echoes produced by old oil can delays or the ethereal sound of a well-loved tape delay, the Space Spiral is totally going to tickle your tone bone.

The Space Spiral's delay time ranges from a tight 30ms to a fast and loose 600ms. Can you imagine having 600ms of delay time at your fingertips? Out of this world! With all of this adjustable delay time you create anything from a classic slapback to a rhythmic wash of cosmic proportions. You want to take it even further? Maybe to an astral plane? Crank up the repeats and let the infinite oscillation of the Space Spiral take you to the other side.

Space Spiral- It'll get you through the night.

Controls:
1. Time: Delay time goes from 30ms to 600ms; Clockwise for long and counterclockwise for short.

2. Repeats: Controls the regeneration of the delay signal. Repeats increase clockwise and gradually begin to build into self-oscillation around 3 o'clock. This oscillation will infinitely continue until the Repeats control is brought back down below the 3 o'clock threshold. These oscillations will last even when the pedal is in bypass mode.

3. Mix: Blends the delay signal in with the dry; Clockwise for more and counterclockwise for less.

4. Depth: Controls the desired amount of modulation; Clockwise for more and counterclockwise for less.

5. Shape: Morphs the wave shape from a soothing triangle shape to a choppy square shape as you turn clockwise.

6. Rate: Controls the speed of the modulation; Clockwise for fast and counterclockwise for short.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 38 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$260.13 SAVE 21%
 1 in stock $205.88
Earth Quaker Devices Spatial Delivery V2  Envelope Filter With Sample & Hold Pedal
Cat: 781724 Rel: 28 Jul 20
 
Envelope filter pedal with sample & hold module
Notes: The Spatial Delivery is an oddball, a voltage controlled envelope filter that allows you to step outside the universe of funk while reinforcing your secret love affair with auto-wah. It has 3 modes: Up Sweep, Down Sweep and Sample and Hold.

With Range, Resonance and Filter controls you can get super emphasized filter sweeps in the Up and Down modes. The Range, in combination with pick attack, controls the sensitivity and reaction time of the envelope and thus the width of the frequency sweep. The higher the Range and harder the attack equals a faster reaction time and higher frequency sweep and vice versa. Reign in the controls a bit, add your favorite overdrive/fuzz after the Spatial Delivery and you've got a real nice resonant, cut-through-the-mix lead tone. Crank the controls back up and you're a neo-bedroom rock god. In the Sample and Hold mode the filter is controlled by random voltage and the Range controls the speed. Add a sub octave into the mix (before or after) and you've just created a deep fried space droid computer freak-out. The filter can be cross faded between high pass (counterclockwise), band pass (center) and low pass (clockwise) for a wide variety of voices. The Resonance control goes from zero to the brink of oscillation and adds more body and ring to the filter voice.

Controls:
1. Range: Adjusts the sensitivity of the envelope in Up and Down mode. In Sample and Hold mode, this controls the speed.

2. Mode Toggle: This toggles between Upward Sweep, Downward Sweep or Sample and Hold.

3. Resonance: This is the filter feedback control, it adds more body and ring to the filter voice.

4. Filter: This crossfades between high pass and low pass filters and allows you to get everything in between. High pass is fully counterclockwise, low pass is full clockwise and center is band pass. This is much more useful than a simple switch because it allows you to blend the filters for different sounds!

Suggested Placement
We recommend placing the Spatial Delivery first in your signal chain. However, due to its envelope control, experimenting with pairing and signal chain placement can take the potential of the Spatial Delivery even further.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 68 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$260.13 SAVE 19%
 1 in stock $211.06
Click for better price!
or call +44 20 7424 1960
quote 781724
Earth Quaker Devices The Depths V2 Analog Optical Vibe Machine Pedal
Cat: 781628 Rel: 28 Jul 20
 
Optical vibe machine pedal
Notes: The Depths is Earth Quaker Devices' take on the classic optical vibe circuit. Now you can swab the decks with the same lush, pulsating, three-dimensional swirling sound you know and love, with some modern accouterments for all you land-lubbers out there.

The Depths is optimized for use with all kinds of instruments, pickups, and to play well with dirt, so nobody's left waiting on shore. If it's got a 1/4" output, plug it in and get deep!

Controls:
1. Intensity: This controls how subtle or intense the overall effect is. Counterclockwise from noon are the more subtle, classic sounds. Clockwise from noon are the more drastic and intense sounds.

2. Voice: Dials in the overall sound. Turn it clockwise for a fuller sound with more lows, bring it back for a thinner, more midrange focused tone.

3. Rate: Controls the speed of the effect. Counterclockwise for slow, clockwise for fast.

4. Level: Controls the volume of the effect. Unity is around 1 o'clock, everything above that is boost.

5. Throb: This controls the low end pulse. It may not be immediately evident on the bridge pickup, but switch to the neck or add some dirt and it comes alive. All the way up for more throb, dial it back for less. Works best when the Voice is set to a warmer tone.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9-18 volt DC power supply with a 2.1mm negative center barrel. Pedals will make extra noise if there is ripple or unclean power. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 21 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$260.13 SAVE 18%
 1 in stock $214.32
Click for better price!
or call +44 20 7424 1960
quote 781628
Earth Quaker Devices The Warden V2 Optical Compressor Pedal
Cat: 781755 Rel: 28 Jul 20
 
Comrpessor pedal
Notes: Hey boss, thanks for taking a visit from The Warden! The Warden is an optical compressor with a feature set usually reserved for studio grade units. Built with high grade components and internally powered by 18v, The Warden has loads of gain and sustain on tap. With complete control over attack, release, sustain and ratio, The Warden will allow everything from a heavy squash with fast attack and release to "barely there" subtle compression. Optical compression has a reputation for having more character than a VCA or FET-based compression and The Warden is no exception.

Controls:
1. Tone: This pedal was designed to slightly color your tone, and the coloration can be dialed-in to your taste. Counterclockwise is treble cut, clockwise is treble boost. The tone is nearly flat around 11 o'clock.

2. Attack: This controls how quickly the compressor reacts and starts leveling the signal. All the way counterclockwise is a fast, nearly immediate reaction. Turning the attack clockwise slows the reaction time.

3. Release: This controls how long it takes the signal to raise back up to the level determined by the Sustain and Ratio settings. All the way counterclockwise is a fast release and the release time slows as you turn it clockwise.

4. Level: This controls the overall output and is affected by the Sustain and Ratio settings. There is no specific unity setting; adjust to taste when you find your perfect compression setting.

5. Ratio: This determines how much the gain reduction affects the signal. All the way up is full compression and the compression is reduced as you turn this counterclockwise which allows more of the boosted, less-compressed signal to come through. There are no defined ratios here.

6. Sustain: This is the heart of The Warden. It controls how hot the signal is, which changes the dynamics of the compression. The Warden is a feedback-style compressor; the hotter the signal, the more active the compression. Very little Sustain= very little compression, less active Attack and Release and a cooler signal. Max Sustain= heavy compression, longer sustain, hotter signal and more lively Attack and Release.

Tech Specs:
Switching
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 31 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$260.13 SAVE 14%
 1 in stock $223.31
Click for better price!
or call +44 20 7424 1960
quote 781755
Electro Harmonix 1440 Fourteen-Fourty Stereo Looper Pedal
Cat: 785073 Rel: 30 Jul 20
 
Looper pedal
Notes: The EHX 1440 Stereo Looper is a compact powerhouse that provides 1440 seconds of high-quality, uncompressed, stereo recording time plus the ability to store 20 different loops. It can even tempo sync to an external MIDI device and is packed with features you'll want. Unlimited overdubbing means you can lay down as many parts as you like while variable tempo playback plus Reverse and Octave speed effects really enhance creative control.

A 1 Shot function is also included, adjustable fadeout times and optional external footswitch control for selecting loops and Undo/Redo. The affordable 1440 Stereo Looper puts a ton of looping power on your pedalboard.
Read more
MRP:$267.98 SAVE 28%
 1 in stock $191.73
Click for better price!
or call +44 20 7424 1960
quote 785073
Keeley 30ms Double Tracker Studio Double Tracker With Reverb Pedal
Cat: 782261 Rel: 04 Aug 20
 
Double tracker/reverb pedal
Notes: This stereo effect pedal offers an array of studio-style doubling effects used for creating thicker, fuller sounding instruments. Also included in the effect pedal is a reverb that simulates the famous chamber in Studio Two. The Keeley 30ms is designed to work with guitar, bass, keyboard, even vocals.

Says Chief Engineer Robert Keeley, "Since the early days of automatic double tracking, pioneered by Ken Townsend and John Lennon at Abbey Road Studios, this technique has become the de facto way of creating recordings that sound bigger and fuller by making it sound like two guitars, or singers, or instrumentalists are playing at same time. The Keeley 30ms Automatic Double Tracker offers musicians the ability to take these techniques with them out on the road with a wide range of tools needed for crafting unique double tracking schemes."

The Keeley Engineering 30ms Automatic Double Tracker pedal can be used in mono with a built in "Abbey Verb" reverb control, or in stereo as the Double Tracker Pro. The 30ms offers altered and detuned effects like a chorus pedal might sound, only without the regularity of a LFO oscillator in Dimension Mode. In this mode you have the ability to create up to two different voices for a stereo double tracked field. The user controls the tuning and delay for results that are stunning mono or, through two amplifiers, sublime stereo. Abbey Mode offers something more similar to a conventional chorus in that it simulates synched tape decks running in parallel with varying tape speeds. Stereo or mono, this mode gives players a wide, lush sound without sounding like a conventional chorus pedal. Lastly, the team at Keeley created a unique Slapback Mode for rockabilly sounds. The Slapback is now a double tracked echo with the two altered voices. Add the Keeley Abbey Verb to this mode to create stunning, new effects.

In Stereo Double Tracker Pro Mode, the unit drops the reverb channel in favor of complete control over the double tracked voices. Each of the two voices can be tuned up to 30 cents sharp or flat. Those voices are then delayed by up to 30 milliseconds for subtle to very distinctive doubling sounds. Via internal switches, users can program the wet output to have either dry and effected sounds or just the effect, giving them true double tracking in stereo- live.
Read more
MRP:$260.13 SAVE 17%
 1 in stock $216.77
Click for better price!
or call +44 20 7424 1960
quote 782261
Keeley Aria Compressor Overdrive Pedal
Cat: 782289 Rel: 04 Aug 20
 
Overdrive pedal
Notes: The Keeley Aria Compressor Drive, The Ultimate Compressor and Overdrive Experience.

Compression and Overdrive are the foundation of Keeley's engineering. These two Keeley tones have inspired countless musicians, now they sit in one extremely versatile, sonic tool.

The Aria Compressor Drive not only offers out most flexible overdrive to date, it has all the tone and blend features of the Compressor Plus. Players also have the ability to swap the order of the compressor and drive for two very useful drive experiences.

Two-Mode Overdrive: Soft clipping and a transparent boost to midrange frequencies, perfect for defining your own voice.
Dual Mode - Clean and Transparent or Heavy Saturation!
Clean and Bold in Low Mode - Focused and Sustaining in High Mode.

Compressor with Clean Blend and Tone Control - Blend in any amount of clean signal for punchy chord work and use the Tone Control to brighten the highs.
Plus Features: Tone and Blend - Perfect for Humbuckers and Single Coils!
Blend for Manhattan style compressor and Tone for treble boosting.

Design for Pro Boards, Effects Order Switching, and Effect Insert
Pedal Switcher Ready! Simply connect to and pedal switcher with TRS cables and control each side of the Aria independetly
Switch the Order of the Compressor and Drive for instant change to feel and response of your combo
Use TRS insert cables to place effects between the Compressor and Drive like phasers, wahs, or other dirt boxes!

Tone Foundation:
Compressors and Overdrive are a fundamental part of the guitar recording process. They are also essentials for live guitar performance. You have two ways you can combine the beautiful midrange of overdrive and the benefits of compression and sustain. Most people run compression before overdrive in order to reduce the potential for idle, static noise. There are times when you want added sustain and therefore might need the compressor after overdrives, because using compressors after overdrives offers players a very warm and rounded, smooth and even tone with tons of sustain. And then you may need to return to the conventional routing, because compression before drives gives you a consistent gain level. Problem solved! Each half of the flexibly routed Keeley Aria Compressor Drive provides tons of volume for boosting and pushing your amp, with each half offering essential tone shaping controls to perfectly sculpt the core of your guitar's sound.

The Aria Compressor Drive comes with TRS insert jacks to allow you to divide the pedal into two units. Insert effects between the two sides! Compressor into delay into overdrive, anyone? Maybe swap that for overdrive into delay into compression.
Read more
MRP:$260.13 SAVE 18%
 1 in stock $212.41
Keeley Aurora Digital Reverb Lush Spatial Studio Quality Reverb Pedal
Cat: 782299 Rel: 04 Aug 20
 
Reverb pedal
Notes: Turn down the lights, turn up the spectrum.

Join Keeley Electronics' grand entrance into the hallowed halls of psycho-acoustic processing - the Aurora Reverb. Few effects complement a guitar better than reverb; from spring reverb coils in a tank to the distant echo of cathedrals to 600 pound sheet-metal plate vibrations. Reverb captures our imaginations and plunges us deeply into our musical psyches. Reverb IS the key to the highway.

At Keeley Electronics, the Aurora Reverb had to meet certain specific criteria. It had to be affordable with no compromise to audio quality. It had to be easy for guitarists to use and be inspiring. And it had to offer the essentials for tailoring your tone without a dozen knobs to learn. Now achieved, we are proud to offer a true bypass, 100% dry analog path, low noise, 24 bit, high-fidelity reverb processor.

AND IT SOUNDS GREAT!

The following controls offer everything from pristine, fast reflections to ethereal spaces to deep, dark and endless caverns.

The Toggle Switch
The three most popular reverb styles that don't come built into your amplifier are Room, Plate and Hall. In the smallest footprint possible, we offer what used to take up a recording studio room or an entire city block. You can achieve cathedral resonance, enormous surface areas of sheet-metal plate sounds or convincing room decays. Room sizes range from something like a broom closet to that of a barn. (Also, careful adjustments to the Room settings yield a signal bordering on the verge of spring reverb, so if your amp doesn't already have a tank, the Aurora pedal has you covered.)

Decay
Decay controls the amount of time it takes for the reverberated sound to disappear. The Aurora pedal provides a range from a realistic, close-quarters reverberated dimension to a "walk-away-and-come- back in a while" signal of complex, still-ringing musical reflections.

Slapback
Otherwise known as "pre-delay". Pre-delay creates distance. How soon or late you hear the first reflection is crucial to crafting the reverberated space. Sometimes you do not want any delay between your note and the reverb. And sometimes, for clarity's sake, you want the reverb to wait a moment before joining the dry signal. Such a setting enables short, staccato, single-syllable type expressions to finish articulating before being suffused AND joined by the tail-end of previously reverberated sounds. The Slapback setting adjusts from zero to 100 milliseconds. When the illusion of infinite space is required, set your Slapback to zero and you'll streak vividly away like Dr. David Bowman breaking free of Jupiter's gravitational pull.

Warmth
Dial up the warmth. Unlike most tone controls, ours is a dampening control and increases the warmth, as it is rolled up. Its brightest setting is when completely dialed down.

Blend
Blend will take your 100% analog dry signal and blend in the reverb, from just the slightest mix of wet to much more. It is recommended that you place it at the end of your pedal chain and use the Blend Knob to tailor your sound.

The Keeley Aurora Reverb provides the essentials guitarists are looking for when they need reverb on their pedal boards. Like that ethereal glow to the mighty Earth herself, Aurora creates a natural halo of sound in the atmosphere of your magnificent core tone.
Read more
MRP:$233.99 SAVE 17%
 1 in stock $195.00
Keeley Bassist Limiting Amplifier Pedal (For Bass)
Cat: 782303 Rel: 04 Aug 20
 
Compresssion & limiting pedal
Notes: The Keeley Bassist Compressor provides true high-fidelity compression and limiting. Be heard and felt using performance compression by Keeley Engineering.

The Bassist Compressor is built around the exotic and extremely high fidelity THAT Corp. 4320. Think of it as very affordable studio-grade compressor in stomp box format! It uses high performance Voltage Controlled Amplifiers, on board true-RMS detector, and ultra high performance op-amps to bring you the very best quality. VCA compressors give you precise control. Therefore they are directly suited to bass guitars. The Keeley Bassist Compressor is both musical and very transparent. Where our older compressors were based on the CA3080 or the LM13700 and are perfect for single coil guitars, the new Keeley Bassist Compressor has no problems with active pre-amps and line level input signals! Not only can the Keeley Bassist handle astonishingly large signals, it has an incredible bandwidth of over 20 KHz and incredibly low noise. No detail in your bass guitar's tone will be lost. The Keeley Bassist will be a sound investment in your tone, you now have rack-mount quality at your feet.

Compression and Threshold

When bass players use the Keeley Bassist Compressor they will be greeted with a sound that is more easily amplified and heard. Using the effect as a limiting amplifier saves your speakers from clipping and distortion. Set the Threshold to look for peaks in your signal and limit distortion from your amplifier or damage to your speakers. Simply watch the Threshold Indicator light to see what type of playing you want to limit, it's that easy! Next set the Compression Ratio Control to determine how much squash you want when the signal is above Threshold. Set Compression all of the way down for no (1:1) compression and use the Gain control as a boost! Set Compression all of the way up for an above-Threshold hard-knee limiter.

A typical soft compressor setting would be 2:1 above threshold. A good starting ratio for the Compression control may be 4:1 as it generally sounds good with bass guitar. A ratio of 5:1 or 6:1 will sound great for slap or funk-style playing. For synth-bass try 10:1 Compression.

Attack and Release

There is a certain figure that just sounds good as far as compression goes; and that's 125 dB/second. With feed forward compressors that use this type of true-RMS detector you use a single time constant parameter. The timing capacitor gives you attack and release times that are adaptive to your playing level or the signal input to the compressor. Bottom line: Attack and Release times vary on program content. Attack times are generally speaking, about 100 times faster than release times.

Attack Time: typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB

Release Time: typically 8ms for 1dB, 40ms for 5dB, 80ms for 10dB, 160ms for 20dB, 240ms for 30dB

Specs:

Voltage Input: 9V

Current Draw: 50mA

Input Impedance 1 Meg ohm

Output Impedance: 100 ohm

Output Voltage Gain: +30dB Boost

Bandwidth > 20kHz

Total Harmonic Distortion: 0.1%

Noise: -95dBV

Threshold Indicator: Dual LED
Read more
MRP:$260.13 SAVE 25%
 1 in stock $195.00
Keeley Caverns Delay/Reverb V2 Delay Pedal
Cat: 782331 Rel: 04 Aug 20
 
Delay/reverb pedal
Notes: All the reverb and analogue-style delay you could wish for in a single pedal thanks to this killer all-rounder. Separate foot switches for reverb and delay on/off, with optional true bypass or 'trails' setting.

Supplier notes:
The Caverns Delay Reverb V2 dual-effect pedal combines delay and reverb for the perfect end to any pedal board. It features Keeley's analog-style tape delay with modulation options. The 650ms of warm delay combine with Spring, Shimmer or Modulated Reverb. Caverns now comes with a True-Bypass or Trails option. Because of its small and compact design, the New Caverns is a perfect fit for any fly-rig or small board where you have tight space requirements. The New V2 features Keeley's most popular time-based effects, blended perfectly via a design fine-tuned for over 2 years. Simply put, it will be an amazing addition to any board.

The Reverb side of the pedal features 3 cavernous sounds:

Spring Mode - Blackface Amp style spring reverb with F Style Tremolo
Modulation Mode - Choral modulation to the reverb for a huge, cavernous space
Shimmer Mode - Reverb with emphasis on octave-up voices in the reverb trails

The Delay side of the pedal incorporates Keeley's popular Magnetic Echo circuit, which is designed to emulate analog tape delay lines. Three way switchable modulation gives you options for adding Wow and Flutter to the repeats. Perfectly voiced echoes sit well in the mix, either clean or with distortion.

The New Caverns Delay Reverb V2 builds on the old Caverns pedal by giving players a more open and logical control layout with more space between the foot switches.

Top-Mounted Jacks allow for a compact pedalboard layout.

True-Bypass or Trails option gives you the freedom to create huge caverns of sounds and lets them ring out even after you turn the pedal off. Our buffers are engineered to retain your tone and to feed your amplifier a full-strength signal.

The New Caverns Delay Reverb V2 is entirely built in the US. Keeley's veteran crew builds the most reliable and road-worthy gear.

Use 2 TRS Breakout cables for effects patching or to use the Caverns with a pro switching system.
Read more
MRP:$233.99 SAVE 27%
 2 in stock $171.02
Keeley Compressor Plus Classic Compressor Pedal With Added Tone And Blend Control
Notes: The Keeley Compressor is the most popular boutique compressor in the world.

The Keeley Compressor Plus is the first true advancement in Keeley's 2 and 4 knob compressor line. The new features are simple and straight forward. Now, there is a simple Release Switch that is tuned for single coils or humbuckers. No more wondering if you have the attack or release set right. Your humbuckers will have all the attack and punch that they should. The Tone Control was also added, which emphasizes the most sensitive harmonics that can be lost in compression. The Compressor Plus now sports a Blend Control that retains the peaks in your playing and, more importantly, the proper phasing of your guitar signal. The Keeley Compressor Plus offers the same gorgeous push of frequencies and sweetening of tone that the old comps gave you, now with the flexibility to easily handle any instrument.

The Keeley Compressor Plus is a compressor with an expander/sustainer. Not only does it act as a regular compressor, limiting the peaks in your playing, it adds more and more gain as notes fade out. Now you have sustain. Nothing worse than a note or a bend that has died before its time. The Keeley Compressor Plus adds just the right amount of sustain and expressive bloom to your notes.

The new Release Switch on the Keeley Compressor Plus is designed to make it very easy to transition between single coil and humbucker guitars. Humbuckers have more average energy than single coils which can cause compressors to stay in "compression mode" for a lot longer. When this happens, any series of notes you play will sound dull. With the quick release of the new Compressor Plus, your humbuckers remain true sounding, and each note retains dynamic attack and definition.

The Tone Control is Keeley's own design taken from analog delays and other vintage effects. Those effects used an emphasis circuit to recover treble and highs after they went through the BBD or other analog delay lines. That circuit was then taken and made it into a full fledged tone controll- it is the perfect way to gently add back in those highs lost in the compression process.

The Blend Control is a way of getting the peaks to come through while having sustain at the same time. So if you want sustain more than peak-limiting, this style of Manhattan Compression is for you! Keep all the peaks and transients with the Blend and Tone Controls while adding sustain on the back end. Heaven!

This compressor isn't just for heavy funk or chicken pickin' anymore.The new Compressor Plus is for players wanting a smooth, subtle wash from their guitar. Remove just the right amount of peaks for an ambient layer and then blend in the right amount of treble for a nice shimmer to your guitar. Use with your favorite fuzz to create a wall of tone like you've only heard on records. Looping has never been easier than with this compressor. Consider it an essential tool when creating loops that sound well-balanced. Forget it all and use the Compressor Plus for the best amp boost you've heard. Nothing pushes an amp better than the Keeley Compressor Plus.
Read more
MRP:$168.63 SAVE 17%
 1 in stock $139.44
Keeley Compressor Pro Full Featured Studio Quality Compressor Pedal
Cat: 782376 Rel: 04 Aug 20
 
Compressor pedal
Notes: Keeley Compressor Pro. The stomp-box sized compressor/limiter is made in Oklahoma, USA and engineered to be an indispensable tool for your musical endeavors. It is in no way limited to be used with only guitar. It has been designed to work as a studio compressor accepting any range of inputs and a frequency response and noise level matching the finest compressors made.

Compression LED Display:
Segment LED display for fast and accurate metering of compression and gain reduction. Gain Reduction Levels of -1dB to -20dB are indicated.

Threshold LED Indicator:
Bi-Color LED to indicate when compression is initiated and released.

Exact RMS Analysis (ERA):
Senses the true RMS value of the input program material such as your guitar, bass or drum machine.

Hard/Soft Knee Compression - Hard Compression for limiting or adding sustain, soft knee or Komfort Kompression for gentle compression, keeping performances lively and natural sounding without potential phase issues in parallel, or blending style compression.
Auto Mode - Program dependent Attack and Release times. Set to Auto ON for worry-free performance and automatic Attack and Release times.
True-Bypass - No tone or signal loss when OFF

The Keeley Compressor Pro is designed to be used at home or in the studio for creating full sounding recordings of any instrument. In live situations, the Compressor Pro can be used to achieve full sounding, polished performances as well as protect amplifiers and speakers from overload. The Comp Pro is designed to work with any instrument from voice and guitar to keyboard, bass, or drums. Use it when creating a podcast or YouTube videos to maintain professional performance levels. Use it around the home to create tons of sustain while at low volumes or low gain settings!
Read more
MRP:$390.85 SAVE 17%
 1 in stock $325.72
Click for better price!
or call +44 20 7424 1960
quote 782376
Keeley D&M Drive & Boost Pedal
Cat: 782395 Rel: 04 Aug 20
 
Drive & boost pedal
Notes: The D&M Drive is the perfect storm of Drive and Boost. The D&M offers a gorgeous sounding high-voltage Boost side which is designed to impart the perfect tone on any amp that needs to be pushed. No longer will you wonder what the perfect clean boost should be. As you roll things up, the drive morphs your tone into singing gold. A sexy and smoothly saturated midrange voice appears which breathes confidence. The Drive side offers everything you would want in a powerful gain stage. From flat honest overdrive that is perfect for any set of chords to searing hot lead work with tons of sustain. The Drive is the perfect counterpoint to the Boost. Not only does each side of the pedal provide rewarding guitar tones, they can be used to stack together for an out-of-this-world experience. The pro switching system developed for the D&M Drive allows you to select which side of the pedal comes first. What's more, you can configure the pedal to work in a pro switching system like the G2 for independent Boost/Drive use!

That Boost
Are you looking for something in between a clean boost, such as the high voltage Keeley Katana, and a germanium modded professional overdrive? If so, the D&M is the answer. To get things started, the D&M Drive delivers insane amounts of headroom. Then, a distinct midrange voice can be dialed in to give you the lead voicing you dream of. When dialed in, it can give you the punch and clarity of a horn yet be subtle and smooth in saturation in order to give you a warm overdrive filled with tons of sustain. Expect it to work well with any amp or rig.

That Drive
Multiple Gain Stages is where it's at. This drive delivers. From its lowest settings, where you feel like you've discovered the perfect pro sounding overdrive, to the roar of a high-end amp, the multiple gain stage Drive delivers a heavily saturated punch. And the headroom here is no slouch. Use it to find that delicate balance between drive and amp saturation for the core of your tone. Turn up the Drive to give yourself a dynamic and searing tube-like gain that excels in sustain. The D&M is designed for quick attack with plenty of high and low end. Rich harmonic gain and sustain with dynamics is what this side offers.

That Switching
Daniel Steinhardt from TheGigRig insisted that this was a versatile dual-gain box that wasn't limited in any way with its two simple stomp switches. You select the order! A simple toggle allows you to configure the pedal so that when both the Drive and Boost are on, you decide which is first. If you want to have a smooth and round tone to go into a richly driven amp-like gain stage - or if you want a highly driven tone with edge and harmonics to be then boosted with clarity and refinement, it's your choice. Not only that, but Daniel had the engineers incorporate his idea for TRS insert cables so that this pedal would easily integrate into a professional switching system like the G2. Now pedalboard designers can configure the D&M Drive to act as two independent pedals, switching between either side of the pedal as it were its own stand alone effect.
Read more
MRP:$307.19 SAVE 21%
 1 in stock $242.92
Keeley Dark Side Modern Fuzz Pedal With Rotary, Vibrato & Delay
Cat: 782380 Rel: 04 Aug 20
 
Fuzz pedal
Notes: We should all be so lucky as to be identified by the sound of a single note. Some players are so well defined that their entire musical journey can be heard in a single note they play. Tone is in the fingers. Tone is in the mind. Effects can be a great way of expressing emotions or creating textures. The Dark Side is about creating sounds and adding new tones to your symphony. It's the things you can't create with your fingers or mind. It's metasymphonic. The Dark Side provides all the textures that define an essence, in one pedal.

The individual pieces that make up the Dark Side workstation are Fuzz, Delay and Modulation. The Fuzz side of the Dark Side is a big fuzz style distortion based on a 1977 op-amp style, which was also used for Keeley's Psi Fuzz. This one is completely and radically different. Many changes have been made to extract the nuances of earlier transistor based fuzzes. This pedal lets your guitar sing with sustain, yet retains the essence of you guitar whether single coil or humbucker based.

The next core element in the Dark Side pedal is the Delay and Modulation side. You can select between a multi-head tape delay effect or between a combination of 4 different modulation sounds. The Dark Side delay has 12 different syncopated delays. They are rhythmic and have the tonal quality of the old spinning drum tape delays. The Dark Side has many subtle filters to get the tape delay setting to have the feel and warmth of the original machines, yet gives you range of control to have modern features like expression pedal control for the number of repeats. You can use it for creating a feedback oscillation delay. Extremely subtle modulations in the delay make it very musical.

The next atom in this workstation is the modulation effect. There are four parts to this effect. Flanger, Rotary Speaker Cabinet, U-Vibe, and Phaser. You can blend between the "Electric Lady" Flanger and a Les-Rotary cabinet, creating new sounds. You can find that perfect blend between a vintage sounding opto-coupler based U-Vibe and the little orange phaser.

There is also an Expression Pedal port on the pedal. It is highly recommended to have an expression pedal handy. You can make many adjustments on the fly that just increase the fun and functionality of the pedal while you're creating music. It has to be a TRS style expression pedal- it is recommended to use something like the M-Audio or Moog expression pedals.
Read more
MRP:$390.85 SAVE 22%
 1 in stock $303.92
Keeley DDR Custom Drive Pedal With Delay Or Reverb
Cat: 782386 Rel: 04 Aug 20
 
Delay/reverb pedal
Notes: The DDR combines the most common guitar effects- DRIVE and WET- into one pedal. Choose between two classic overdrive tones and then pour on some delay or reverb. One pedal, any gig.

The DRIVE section gives you two styles of overdrive to choose from: Crunch or Lead. The Crunch Style gives you a gritty British tube-amp combo sound. The Lead Style gives you a warm and dark, mid-pushed overdrive. The WET side of the pedal gives you Delays and Reverbs. A Vintage/Modern Switch allows you to toggle between Spring & Plate reverb or Analog & Digital delay. Use the built-in effects loop to insert effects between Drive and Wet, or run it by itself as the only pedal you'll need!

DRIVE Channel:
A pair of modified super-drives to choose from. Volume, Tone, and Drive for days!

STYLE Switch:
Tube-amp Crunch or Lead-channel Sustain

WET Channel:
three knob delay or reverb with Blend, Decay, and Time

Delay/Reverb Switch:
Center toggle, WET Mode Select

Top-mounted jacks for effect pedal insert or split

TRS Insert Switch:
side mounted selector

True-Bypass or Trails Switch:
side mounted selector

9VDC, 100 mA, no battery option
Designed and Made in the USA
Read more
MRP:$233.99 SAVE 26%
 1 in stock $173.20
Keeley Eccos Neo Vintage Tape Delay & Looper Pedal
Cat: 782403 Rel: 04 Aug 20
 
Tape delay & looper pedal
Notes: ECCOS is Keeley Electronics' first venture into high-powered Digital Signal Processing and after spending almost 4 years customizing and meticulously refining their Dream DSP platform, they've managed to create nothing short of a delay and looper masterpiece.

Sporting up to 1.5 seconds of beautiful tape-flanged and vibrato-modulated stereo tape delays, ECCOS will create everything from classic vintage slapbacks to worlds of modulated ping-ponging dreamscapes.

But that's not all. ECCOS can also be used as a full-blown stereo looper with creative features such as Reverse, Half-Speed and One-Shot, making this compact pedal a true performance powerhouse.

And with expression control, remote bypass, 3 presets, analog-dry-through, kill-dry and a ridiculously low power-draw at only 115mA, this pedal is sure to add immense flexibility and gorgeous sounds to any rig.

Studio quality delay with tape flanged modulation

3 memory presets, subdivisions, trails, runaway feedback

Huge array of tone and time-based controls with the Alt Hold feature

Full-featured Looper with reverse and half-speed loop effects

2 minutes of looping in mono, 60 seconds in stereo, endless layers of recording!

True-Bypass and Tap Tempo on-board or remotely with any style pedal-switcher

Expression pedal assignment over any parameter and in any direction

Pro Rig designed, remote control thru 1/4? jacks for live use with pedal switcher systems

100% analog dry signal, audiophile designed input to output

Stereo True-Bypass/Trails, switchable on the fly

9 Volt DC, 115 mA low-current design

Made in Edmond, USA
Read more
MRP:$312.42 SAVE 25%
 1 in stock $234.21
Keeley Filaments High Gain Distortion Pedal
Cat: 782417 Rel: 04 Aug 20
 
Distortion pedal
Notes: Keeley Electronics, the leading manufacturer of pedals built in the U.S., announces the release of their most potent and aggressive metal stompbox to date: the Filaments High Gain Distortion Pedal. The Filaments accurately replicates high-gain tube amps by layering 3 stages of gain while providing 7 ultra-flexible ways to EQ the tone.

The Filaments has more flexibility in tone-shaping than any other Keeley stompbox. Level and Gain set the stage for rich layers of high gain tube-amp saturation. Bass and Body give you the punch and authority of a gain monster no matter what size amp you are playing. Even if you're running a 10-inch speaker the bass and body controls will give you the low end bass response you need. Running through a 4×12 already? Just dial back the body control to keep the sound tight and focused. Have an amp that's hard to push? The Boost and Crunch switches give you two different levels of gain and compression to get your edge just right for your tone. The Presence control works with the Bright control to give any guitar or pickup combination the authority to stand up and shout. Lastly, the Treble control gives you that added range of highs to make your amp sing.

Metal is more nuanced and subdivided that nearly any other style of music outside the classical stuff. The Keeley Filaments High Gain Distortion pedal feels your pain, brother. So of course its amazing 7 layer toneshaping lets you chameleon into any of these types of metal: Christian or Death Metal, Black Metal or Folk Metal, both types of Core, Grind and Metal. Crust Punk or Glam Metal? Progressive Jazz Metal or just good old Stoner Metal? The Filaments pedal has got you covered. Get a Keeley Filaments High Gain Distortion pedal and pound it out !! Get creative! Create your own Metal.

Keeley is well-known for high-end tone and durability. His attention to detail in stompbox tone, tube amp building experience and "tough as nails" build quality ensures his new Filaments pedal will dominate the high-gain pedalboard. Isn't it time you had a high gain pedal that gives you everything you need for the road?

Tech Specs:

9-18 VDC - Louder and More Powerful at 18 Volts!

Ultra Low Current = 10mA

Center Negative Tip

Power Supply Required - No Battery Operation

True-Bypass
Read more
MRP:$247.06 SAVE 21%
 1 in stock $195.00
Keeley Fuzz Bender	 Fuzz Pedal With Active EQ And Gate Controls
Cat: 782420 Rel: 04 Aug 20
 
Fuzz pedal
Notes: The Keeley Fuzz Bender is a 5 knob-3 transistor modern fuzz using a combination of high-gain silicon and silky smooth germanium. What makes fuzz better? Active EQ. Using two gyrators as an active EQ gives you the ability to create massive fuzz tones not possible with typical square-wave boxes. Pummel your amp with over 20dB of boost/cut at 100Hz and 10K Hz. The Fuzz Bender is built around vintage Japanese germanium to create its monumental fuzz tones. With the all new Bias Control, you control the attack and decay of your notes. Anything from Fat Square Waves to Angular Fuzz to glitchy-Velcro attacks are possible with the Bias Control. The Fuzz Bender's five knobs confirm size matters when creating a new and epic world of fuzz.
Read more
MRP:$194.77 SAVE 18%
 1 in stock $159.58
Click for better price!
or call +44 20 7424 1960
quote 782420
Keeley GC-2 Limiting Amplifier Pedal (For Guitar & Other Instruments)
Cat: 782422 Rel: 04 Aug 20
 
Compressor/limiting amplifier
Notes: The Keeley Compressor GC-2 Limiting Amplifier. The same great professional compression/limiting technology available in our Bassist Limiting Amplifier, for musicians and compressor fans of all kinds!

The Keeley Compressor GC-2 Limiting Amplifier is built around the exotic and extremely high-fidelity THAT Corp. 4320. Think of it as very musical studio-grade compressor in stomp box format! It uses high performance Voltage Controlled Amplifiers, on board true-RMS detector, and ultra-high performance op-amps to bring you the very best quality. This type of compressor gives you precise control and very musical results. This along with a full frequency range means that the GC-2 Limiting Amplifier compressor is well suited for guitar, keyboards, drum machines and, really, anything you can throw at it. The Keeley GC-2 Limiting Amplifier is both musical and transparent. Where our older compressors were based on the CA3080 or the LM13700 and are perfect for that "Compressor Effect" and are still in use by tens of thousands of players, the new Keeley GC-2 is a different style compressor, aimed at being the ultimate in low noise and transparency. Not only can it handle astonishingly large signals, but it has an incredible bandwidth of over 20 KHz. No detail in your guitar's tone will be lost. The Keeley GC-2 will be a sound investment in your tone-you now have genuine rack-mount quality at your feet.

When musicians use the new Keeley Compressor GC-2, they will be greeted with a sound that is more easily amplified and heard. Using the effect as a limiting amplifier saves your speakers from clipping and distortion. Set the Threshold to look for peaks in your signal and limit distortion from your amplifier or damage to your speakers. Simply watch the Threshold Indicator light to see what type of playing you want to limit; it's that easy! Next, set the Compression Ratio Control to determine how much squash you want when the signal is above Threshold. Set Compression all of the way down (1:1) for no compression and use the Gain control as a boost. Set Compression all of the way up for an above-Threshold, hard-knee limiter.

There is a certain figure that just sounds good as far as compression goes, and that's 125 dB/second. With feed-forward compressors that use this type of true-RMS detector you use a single time-constant parameter. The timing capacitor gives you attack and release times that are adaptive to your playing level or the signal input to the compressor. Bottom line: Attack and Release times vary on program content. Attack times are, generally speaking, about 100 times faster than release times.

Attack Time: typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB

Release Time: typically 8ms for 1dB, 40ms for 5dB, 80ms for 10dB, 160ms for 20dB, 240ms for 30dB



Specs:

Voltage Input: 9V

Current Draw: 50mA

Input Impedance 1 Meg ohm

Output Impedance: 100 ohm

Output Voltage Gain: +30dB Boost

Bandwidth > 20kHz

Total Harmonic Distortion: 0.1%

Noise: -95dBV

Threshold Indicator: Dual LED
Read more
MRP:$260.13 SAVE 17%
 1 in stock $215.69
Click for better price!
or call +44 20 7424 1960
quote 782422
Keeley Hooke Reverb Spring/Octave Reverb Pedal With Tremolo
Cat: 782425 Rel: 04 Aug 20
 
Reverb/tremolo pedal
Notes: The new Hooke Spring Reverb from Keeley brings vintage tube-amp spring reverb and tremolo into one package. Bring your Blackface reverb and tremolo on the road with you without lugging around your prized possession! Choose from Classic Spring, Blackface Trem-n-Verb, or an organ-like Fugue-Verb.

The Hooke Spring Reverb begins with a Spring Reverb mode. The main features of this mode include the Tone and Spring controls. The Tone control allows you to work within the range of bright and spanky to dark and thick. The Spring control is the amount "looseness" or "Sproing!" in the reverb pan. Loose springs seem to generate a lot of reflections, and you can hear the reverb "bounce." With the Hooke, you can simulate a specific reverb pan of a vintage amp, two-springs, three-springs, short, medium, long decay ... it's all in there. What's more, combinations of these two controls allow you to fine-tune the tone and the character of the springs and tubes in order to dial in your favorite vintage reverb response. The depth and warmth of the Hooke reverb is simply remarkable. It's one of our finest creations.

Trem-n-verb is designed to give you the ultimate Fullerton, CA black panel Vibrato channel reverb. Everyone knows that it's not really (pitch) vibrato, it's tremolo. Keeley have EQ'd and filtered the sound to not only be tube-like, also crafted a tonal modification that makes for a deep, throbbing tremolo. By adjusting the bias of the output tubes for the volume tremolo, you also dip the volume of the reverb. A special recipe has been created in which the reverb washes over the tremolo texture just a little thickened in order to craft a tone that is truly magical.

The Hooke Reverb needed something crazy, something that just didn't exist. Ah, yes, all wet. All wet is where magic can happen. No original signal, all wet spring reverb with octave up and down. Church Organ, Organ Reverb, Fugue It! Get Hooked and Go Fugue!

Read more
MRP:$233.99 SAVE 22%
 1 in stock $181.92
Keeley Katana Mini Clean Boost Pedal
Cat: 782428 Rel: 04 Aug 20
 
Clean boost pedal
Notes: Mini Katana Clean Boost- Keeley's oldest design made smaller and with tasteful updates including an additional feature. The Katana started back in 2002 within the Time Machine Boost. It was a dual class A JFET design that gave players and incredible boost and sounded so good they never turned off. In fact they often ran two or three on stages like John Mayer! The Mini Katana boost provides over 35dB of boost. Enough for the most demanding players and sound reinforcement.

The new Mini Katana is now a 4 Mode Booster! With the dual micro switches you have a total of four sounds possible. Need drive, just flip the micro Hi-Gain Switch inside and you've got overdriven tone! Flip the Hi-Cut Switch (NEW for the Katana Mini!) on the inside and you have a warmer tone to soften any Strat or Tele. Flip both switches and you have the ultimate sounding boost, thick, creamy, tube-amp sounding, and plenty of volume on tap!

Obsessed with cleanest, most enjoyable tone boosted? Well, Before other people started using Blue LED's and non-diode clipping stages, there was the TMB and Katana.... Cascading FET stages do the tube-amp-thing like nothing else!

Now made smaller, it will fit any board - any budget. Enjoy a tasteful update to the pedal that redefined clean boost in the boutique era!
Read more
MRP:$129.41 SAVE 22%
 1 in stock $100.80
Keeley Memphis Sun Lo-Fi Reverb, Echo & Double-Tracker Pedal
Cat: 782474 Rel: 04 Aug 20
 
Reverb/echo/double tracker pedal
Notes: The new Memphis Sun - Lo-Fi Reverb, Echo and Double-Tracker is Keeley's second studio themed pedal. Like the Keeley 30ms ADT, this pedal gives you a wealth of tones for capturing that classic Rock-and-Roll sound as well as sounds you've not heard before. It's NeoVintage. It's an Echo and Reverb pedal.
Toggle through the different effects presets:

SLAPBACK 600 - Echo for long delays
SUN MODE - Auto Track-Doubling and slapback with short delays
ROOM - Studio simulation reverb

Both of the ECHO 600 and SUN MODE effects have a Room Reverb.

It's a one-knob, rock and roll type of room reverb.

SLAPBACK 600

Rock and Roll is the Devil's music, right? So of course, the delay time is up to 666ms to simulate some unearthly echo machine that never really existed. Filtering in the Slackback mode is done in stages. First, the response is heavily filtered at 1 kHz then compress the thing. Remember the concept: pack a bunch of sound in a small room and it compresses. Next, it's filtered again at 1 kHz ! Sounds like Rock and Roll, right? Aaron Tackett is the Rock and Roll Doctor of DSP at Keeley. Not only is he devilishly good looking, he has a way of making waves look good - adding curves, so to speak. He has added 2nd and 3rd order harmonics to this mix to simulate tape response and equipment distortions. Waves folded back on themselves. You're gonna love his curves.

Time 30-666ms m/ m/
Regen As Jack White says: "Three." Up to three repeats. Or sometimes six....
Reverb Old Rock-and-Roll Room Reverb.

Sun Mode

Let's Do it Twice Mama, It's Alright! Automatic Double Tracking (ADT) was not available in the 1950s, but it's sneaked in here because it makes a wonderful sound. And, if you lengthen the time, it goes right into slapback territory which is at the heart of Country and Rock and Roll guitar sounds. Like our Keeley 30ms, this pedal will do ADT. The Memphis Sun creates a vintage-voiced double-track in mono. Your guitar-playin' "Gemini-Twin" has a very warmed-up tone. Adjusting the Time Control lets you easily create anything from Double Tracking to Slapback with up to 180ms of delay time.

Time Delay Time is 0-180ms. For Automatic Double-Tracking set this control at the second mark or lower, 0-30ms. For slapback echo 30-180ms sounds great. The knob markers notate 0,30,60, 90, 120, 150, and 180ms
Regen Modulation for the ADT. Set to OFF for NO Rate or Depth. Increasing this control increases both the Rate and Depth of "Tape" modulation.
Reverb It's Still Rock-and-Roll Room Reverb to Me

Room

The Room Reverb simulates a small 33' by 18' asbestos-tiled room so filled with music the sounds actually get compressed- with the frequency response of the mics used back then taken into account. The RCA 77 is loosely simulated by a group of filters including a HPF = 300 Hz and LPF = 8 kHz. Many artifacts are incorporated in our room reverb. And second and third order harmonics are added to make sure it sounds just right.

Time is the Pre-Delay amount: 0-150ms of pre-delay. This allows for a slapback sound as the first reflections come into focus.
Regen is the Tone control: this is an active filter +/- 10 dB and is centered around 1.1 kHz.
Reverb is the Depth control for the reverberations.

That's What I Say Rockin' Robbin!
NeoVintage - Low Fidelity. That's right. That's what I say. This doesn't sounds like some merry band of pixie nymphs playing digital fiddles in your ear.
Read more
MRP:$233.99 SAVE 29%
 1 in stock $166.67
Keeley Monterey Fuzz Vibe Rotary Wah Pedal
Cat: 782431 Rel: 04 Aug 20
 
Fuzz/wah pedal
Notes: Hendrix-inspired pedal combines fuzz and modulation for psychedelic bliss. Dial in a blend of distortion with rotary simulation, auto wah, octaver and more. Huge tone and impressive range.

Supllier notes:
With the Keeley Monterey Workstation you take one step back in time and two steps forward. The Monterey is a surrealistic envelope of neo-vintage effects. It combines classic sounds with new interpretations to create a modern timbre and audio spectrum for guitarists.

The Keeley Monterey Rotary Fuzz Vibe has a vintage fuzz, rotary speaker, vibe, harmonic and auto wah, an octave up or octave down, as well an expression control to allow you to create a rich array of new and newer sounds.

There are two channels on the Monterey Rotary Fuzz Vibe, and these can be configured to give you five different sounds.

The right stomp switch activates the fuzz channel. The fuzz channel has been designed to give you a rich, full, classic two-transistor fuzz sound that is accurate yet has a touch of smoothness added. It is very responsive and dynamic. It plays well in any position on a Strat or Les Paul style guitar. At the heart of the fuzz are vintage Fairchild Semiconductor transistors. These moderate gain transistors offer the perfect fuzz tone and do not have the temperamental temperature related problems that germanium devices exhibit, while still giving you incredible tone.

The modulation channel is where the fun really starts. The Monterey Rotary Fuzz Vibe offers an Octave effect with both the Vibe and Wah sounds. With those two sounds you can either have Octave Up, Octave Down, or No Octave.

In the Center Position of the Octave Control you have NO octave up or down. If you turn the Octave Control up (or clockwise), you have an increasing octave up sound. As you turn the Octave Control down, you have an increasing amount of octave down sound added. Again, if you do not want an octave effect added, simply set the Octave Control to the center position.

The Monterey Rotary Fuzz Vibe features a very rich and deep vibe sound. The "Kool Vibe" setting is perfect for getting complex phaser-like sounds. It combines phasing and tremolo at key frequencies to give you incredible depth and rhythm. Not only does it match the frequency response of a vibe, it simulates the unique pulsing of a photo-cell based effect. You can add the Octave to the "Kool Vibe" for an amazing doubling effect or for an incredibly deep synth bass type sound.

The "Les Rotary" sound in the Monterey Fuzz Vibe is both very accurate and surprisingly new sounding. Like the original cabinet, this simulation joins both the lower drum and the upper horn into a rich, dimensional effect that generates an unmistakable chorus and tremolo soundscape. Not only is the cabinet itself simulated with very short reverberated reflections that offer a doubling effect, the Doppler Effect provides a soothing chorused sound that is clean and ethereal. The Octave Control in the Rotary cabinet simulation controls the volume of the horn or tweeter sounds. It does not produce an octave effect here. This allows you to get a very chorus-like effect with ample high-end detail when simulating a "Les Rotary" style cabinet. Set the Rate OFF for no rotation, turn the Fuzz on, and the Depth and Octave controls give you a wonderful speaker cabinet simulation. It's fuzz with tonal control like you've never had before! Perfect for matching any size of power amp with the pedal's fuzz to give you anything from dark overdrive to hard, edgy, squared fuzz!

The "Harmonic Wah" section combines several more new sounds from Keeley in the Monterey Rotary Fuzz Vibe. It is a fixed or cocked wah sound, an auto wah, a harmonic/tremolo wah, and even a regular foot-controlled wah when you add an expression pedal. With the Depth Control turned all of the way down/off you are in the Wah Mode. The Wah Mode gives you control over the frequency you boost by adjusting the Rate Control. If you have an expression pedal connected, it becomes a regular Wah Pedal. Turn the Depth control up a slight amount and the Monterey becomes an Auto Wah. In the Auto Wah mode, your pick attack and strength creates an envelope filter sound. After the noon/center position on the Depth Control, you have the new Harmonic Wah. It is like the harmonic tremolo on a brown face amp, but the frequencies are centered around a wah pedal instead. It's ideal for players who like the rhythmic back-and-forth rocking sound of a wah pedal.

Add any expression pedal controller to the EXP input on the back and you have control over the Rate of the "Les Rotary" and "Kool Vibe" settings. In the "Harmonic Wah" setting, it controls the frequencies.
Read more
MRP:$390.85 SAVE 19%
 1 in stock $317.00
Click for better price!
or call +44 20 7424 1960
quote 782431
Keeley Neutrino V2 Optocoupler Envelope Filter/Auto Wah Pedal
Cat: 782443 Rel: 04 Aug 20
 
Envelope filter/wah pedal
Notes: The Keeley Neutrino V2 is an amazingly toneful and compact form of the classic opto-coupler envelope filter. The Neutrino takes your guitar playing and creates an automatic wah sound based on your pick attack! Envelope filters or auto-wahs as they are often called, sound and react best when they are opto-coupler based. The opto-couplers used in the Neutrino are particularly smooth, giving you an amazing vowel-like tone. The Keeley Neutrino gives you 3 filter ranges, 2 directions, 2 ranges for the frequency center and a Peak control. Keeley has engineered a power supply voltage-doubler so you maintain the highest headroom for your tone. An incredibly tough build means it will last for many decades to come. Whether you're in a jam band or playing funk, the Keeley Neutrino V2 delivers incredible vocal-like tone.
Read more
MRP:$233.99 SAVE 27%
 1 in stock $170.51
Keeley Nocturner Dark Reverb Pedal
Cat: 782447 Rel: 04 Aug 20
 
Reverb pedal
Notes: Nocturner Reverb - Dark, watery halls of reverberation. Shimmering highlights, eerie reverse verb that sings back at you.

The Nocturner is darker in voice than ther Aurora, with two of our new tones, Shimmer and Reverse, (as on the Sojourner) the Nocturner is a reverb fan's dream. It's simple to let the pedal do the work and start experimenting with deep and rich watery layers of reverb, or switch modes and let shimmering washes highlight your playing.

Read more
MRP:$260.13 SAVE 18%
 1 in stock $212.42
Keeley Oxblood Overdrive Pedal
Cat: 782448 Rel: 04 Aug 20
 
Overdrive pedal
Notes: When inspiration hits, you need the voice to proclaim it. When you need that voice, count on the Keeley Oxblood Overdrive to be your beast of burden.

The Keeley Oxblood Overdrive is Keeley's response to everyone cloning the "Mythical Beast" pedal, with the intent of building an original design, a circuit that lets players blend from perfectly clean to amp-crushing roar, and animpossibly huge and focused midrange that makes any guitar- Strat, Paul, Tele- sound incredible.

Clean, distortion, fuzz - it's all there.
With the Oxblood Overdrive you roll off the Drive Control and get a perfectly clean sound; you can dial in any amount of distortion and volume to stomp an amp into pure tonal Nirvana. The Keeley Oxblood Overdrive offers you two ways to clip and saturate your signal with overtones by selecting carefully chosen diodes. These are different than the standard Oxblood. These diodes were chosen to give you bigger, more open amp tones without a lot of compression.

The key to the ultimate overdrive, in our opinion, is the ability to control five different parameters.

Bass response
The Phat Switch cuts bass response to give you that classic Screamer or that mythic, K-like midrange shelving. The bass response, when cut, is saturated with a hint of 2nd order harmonics. Punchy and full yet not overbearing, it cuts like a buffalo.

Clipping
Sometimes there just ain't enough gain in the world. Well, not so with this beast. The Clipping Switch gives you the ability to sing with near infinite sustain or just stand on your amp like a chief.

Tone Control
You need to be able to dial in the highs perfectly or nothing else matters, right? The highs are what make it ear candy or ice picks, giving you the range to do whatever the heck you want to do. And that's a two-heck sentence.

Volume
You have to be able to put the pedal to the metal whenever you darn well chose. Voltage doubling in our circuit gives you just that. Headroom for days. Slay an amp, leave it a bloody mess. No, you won't blow tubes, but you will have them at the right temperature to make them glow with delight.
Drive. What? You want me to describe Drive? Shoot, from "Is it ON?" cleans to searing sustain and saturation. It pushes you. Compels you to play. Non-stop playing....

Midrange
The 6th sign of a wonderful overdrive pedal is what's under the hood. It's masterful creation of sultry mids. The kind of mids singers or cellos are known for. Throaty and powerful. Not just a woman tone, but a manly roar. Not congested and stuffed up. Focused and brilliant.

Trifecta
The Keeley Oxblood Overdrive was designed by Robert Keeley and Craighton Hale with a lot of help and insight from Jack Orman. Jack Orman has been a pioneer in the modern world of effects for 20 years. His thoughts and ideas are incorporated by nearly every boutique builder out there. Here is your chance to hear a brand new creation designed to outperform any of the clones.
Read more
MRP:$260.13 SAVE 25%
 1 in stock $193.90
Keeley Red Dirt Germanium Special NOS Germanium Transistor Equipped Red Dirt Overdrive Pedal
Notes: Keeley's latest mod to the venerable platform has everyone grinning here at the shop. The Red Dirt Germanium is nothing short of a red hot saturation machine. Perfect classic amp tones.

The Red Dirt overdrive began from a quest to find the perfect classic drive sound while also offering new levels of sonic versatility to satisfy a wider range of musical styles. Founder and head engineer Robert Keeley took this idea and combined the great sounds found within his original "Mod Plus" and "Baked" modified pedals and added refinements found exclusively in his custom pedal line. A Keeley designed FET input stage makes this overdrive breakup in a whole new, genuinely "tube like" style that will have your leads singing and your rhythm playing sounding more dynamic and expressive than ever. It all culminates in an overdrive that is superbly dynamic, with crispness and clarity that let players cut through a dense mix, while retaining the plump midrange. By incorporating these tones along with the Keeley standard of U.S.A. hand-built quality using premium components, the Red Dirt overdrive aims to become an indispensable part of any pedal chain.
Read more
MRP:$233.99 SAVE 17%
 1 in stock $195.00
Keeley Seafoam Plus Chorus Double Chorus & ADT Pedal
Cat: 782462 Rel: 04 Aug 20
 
Chorus pedal
Notes: Keeley are proud to announce the all new Seafoam Plus Chorus - True Chorus and ADT with Reverb. It will forever change the way you think about chorus, because Keeley have developed a new type of chorus that until now has only been available in expensive DAWs and in studios. Not only is it tuned for guitar, but there are voices and modes created specifically for bass players including flanging and tremolo. Lastly, this tri-mode chorus pedal offers internal switching for vintage and modern tones, further doubling the amount of sounds you can get.

ADT: the new definition of chorus.
In the Seafoam Plus Chorus you get the automatic doubler that was developed in the revolutionary 30ms Double Tracker. The ADT chorus is what is called True Chorus, because second and third voice-like singers in a choir are created. Not only do they sing at different times, they sing at different pitches. True Chorus.

Seafoam Mode: You guessed it- the all new Seafoam Plus Chorus- lush, wide, and with a very musical vibrato. It gives you the lush sounds and tone of a vintage BBD analog chorus unit. This is where you'll find a typical chorus feature. The Seafoam Mode of the pedal has an LFO, the regularly cycling part you hear in most every other chorus unit. It provides a classic tone that you expect and which has become part of many classic tunes. Set the rate for slow and the depth for wide, and enjoy a really spacious sounding chorus. Roll the Mix Control all of the way up for Vibrato. With the Space control acting as a Tone Control in this mode, you can go from bright to vintage warmth, dialing in the perfect chorus.

Dual Chorus Mode: a frequency crossover-based dual-chorus engine. Imagine a dividing line that is centered on your high E-string. Control the depth of chorus independently for highs and lows. Craft the ultimate Come As You Are (Nirvana) of chorus tones. Create a very deep, throbbing chorus on the low end, and a near perfect calm on the top end. Or make the high-end and shimmer and waver while keeping the low end fixed!

ChoralFlangelo
OK, it goes twice as deep. The Seafoam Plus Chorus is a Bass Chorus, Flanger, and Tremolo too! Pop off the back, flick a switch, and it's a bass guitar player's dream. The Space Controls gives you controls or Regeneration, High-pass filtering to keep things tight, and a haunting Tremolo you have to hear to believe! o let's get down and funky, Michelangelo!

Vintage at Heart
Want a softer tone? Chorus that's silky smooth and warm? No problem. Internal switching puts it in Vintage Mode. The Keeley Seafoam Plus Chorus ships in Modern Mode for ultra wide, lush, and high-fidelity chorus. Either way, enjoy sounds that are downright frighteningly good.
Read more
MRP:$247.06 SAVE 17%
 1 in stock $205.88
Keeley Super Phat Mod Full Range Transparent Overdrive Pedal
Cat: 782451 Rel: 04 Aug 20
 
Overdrive pedal
Notes: Many say the Phat Mod delivers their favorite tone from a pedal. It's that natural break-up that just feels good and lets you express yourself. The dynamics make it feel alive and part of your fingers. That's the reason the modified pedal has stayed on people's boards for nearly 15 years. The Keeley Super Phat Mod is the famous mod now perfected with amazing sounding JFETs that emulate old tube amps in a unique way.

The original pedal was a great design that features tube-like amp stages, tube amp tone stacks, and a variety of tone shaping circuits to bring out the best in any guitar's pickups. The problem with building one in the past has been the difficulty finding the perfect FET to capture the magic. If the harmonic content and grain of the distortion and overdrive weren't exactly right, it was put to one side- then Keeley found the magic device that pushed it over the top, and it was dressed in gold and royal purple. The name badge had to speak of its history and heritage. With Super Phat Mod in an old, Blackface-style logo and the metal-flake clear-sparkle on gold, it will look incredible in any rig.

The Super Phat Mod pedal now has incredible dynamics. It is full range and very responsive. The phrase "transparent overdrive" was born of this design! From country pickin', to blues and rock wailing, the Phat Mod is the choice for those not wanting the over-refined sound of a common Screamer. Set the gain high and let your guitar's volume control or your pick attack do the work. With the Super Phat Mod, you now have all of the refinements-the very best of tone-shaping electronics and modern features like true-bypass.

The Keeley BD-2 was the first mod that had a switch. It was done to give players two modes of bass response. With the slight boost, it was called the Phat mode. It was perfect for players of Strats and Teles who wanted just a small push without being muddy. That same design is also available via the micro toggle on the Super Phat Mod. Later on Keeley released the Luna Overdrive which won a Gear of the Year award in England, and that pedal had further refinements made to it and became the Katana Blue Drive. The Katana Blues Drive still retained the active bass and treble controls but smoothed out the highs and increased the gain range slightly. That was an original design designed to meet many of the tonal characteristics of the Blues Driver. The new Super Phat Mod takes off by duplicating the Keeley Phat Mod part-for-part with the exception of the new super JFETs.
Read more
MRP:$194.77 SAVE 22%
 1 in stock $151.41
Keeley Synth-1 Reverse Attack Fuzz Wave Generator Pedal
Cat: 782476 Rel: 04 Aug 20
 
Fuzz wave generator pedal
Notes: The Synth-1 allows you to create fuzzed-out synth waves! Use the Filter and Blend controls to mix your guitar with the fuzz from the synth. Go from churning slow-gear reverse swells to sounding like a light saber.

The Keeley Synth-1 is a guitar-triggered, single-note wave generator. You control the tone of the wave with the Filter Control. The lead-in time or swell of the note is controlled with the Attack knob. Then use the Blend control to remove the natural tone from your guitar as you slide through synth-sounding fuzz waves. Use an expression pedal to control the Filter, and now you have Wah-Wah-like control of the Synth-1.

Synth Wave Generator
Create fuzzed-out, single note synth sounds

Reverse Attack
Volume Swell Effect - put your guitar in slow gear!

Chaos Switch- change dimensional triggering and octaves and stuff

Filter - shape the EQ and tone of your fuzz wave

Wave Selector - change wave modes on the fly with your foot!

Control the Blend of your natural guitar and the wave generator

Side Mount Expression Jack for TRS control of the Filter

Top Mounted Jacks, True-Bypass

Designed and Made in the USA
Read more
MRP:$233.99 SAVE 22%
 1 in stock $181.92
Keeley Verb O Trem Inspired Reverb & Tremolo Pedal
Cat: 782478 Rel: 04 Aug 20
 
Reverb/tremolo pedal
Notes: The Keeley VoT reverb and tremolo combo gives players a simple and beautiful sounding way to end their pedal boards. Reverb and Tremolo often sound best at the end of your guitar rig, after effects like compression, fuzz or overdrive. The Keeley VoT gives you famous Keeley spring and plate reverbs as well as modulated tube amp tremolos. This immaculate pairing provides you with everything you need for a small, compact pedal board.

When you go minimalist, you still consider Reverb and Tremolo. So if you're doing a small gig with a compact board or you just want the captivating power of tremolo and reverb at the same time, the Keeley VoT is a simple and beautiful sounding combo.

Reverbs
Keeley 2 Spring Reverb is the real deal, it's so good sounding, they install it in The Amp now. The Keeley Spring Reverb allows you to get that splashy spring sound that instantly fattens your guitar tone.

If you want something super smooth, however, you flip it over to switch in the Plate Reverb. Get that huge plate reverb sheen by simply flipping a switch!

Tremolos
A Lotus Flower of Tremolos- you have three tremolos in the Keeley VoT.

R+T is an organic tube bias type tremolo. This means you hear the tube amp bias change enough to modulate the volume. A very personal and haunting tremolo. Very moody.

Mack - This mode is a MagnaAmp style pitch vibrato. Done by carefully changing the phase to elicit a silky smooth pitch shift. Sounds like you have your finger on the pulse of life. Sometimes a walk on the wild side is the way to go.

HAR - Harmonically Amplified Resonator. I made that up too. Harmonic Tremolo -two filters that we vine around, back and forth, creating a notch filter that gives you that Tower of Flower sound.

VoT - Lotus
Here's where the flowering magic occurs: you can set the VoT to be either Reverb OR Tremolo OR Both if you want. Let's say you just need some 'verb for the night, simply reduce the Depth control! Reverb Purity.

What if you want to use the tremolo only? Simply roll off the Reverb control.

This pedal can simply and easily be reborn into any combination of tones you need.
Read more
MRP:$194.77 SAVE 17%
 1 in stock $162.32
KMA Audio Machines Belfry Buffer Quality Buffer Pedal
Cat: 782212 Rel: 31 Jul 20
 
Buffer pedal
Notes: There once was a time where all the streets were grey and dark, filled with dust, dirt and lifeless existence. Humankind was lost and slowly losing its belief in the beauty of the world. Until one day, something began to tower above the smoke-filled chimneys. Something with a serene and clear clang that steered the people out of the darkness and towards the enlightenment they had craved. Open your ears and hear the sweet chime coming from the graceful Belfry Buffer.

The Belfry Buffer is KMA Audio Machines' take on a high-fidelity studio-quality buffer that'll keep your signal safe from the tone-sucking constraints of long cable-runs and epic pedalboards the size of a small spaceship. This leaves your instrument sounding as crisp, clear and natural as if it was going straight into an amp and nothing else.

Belfry sports a unique multi-path design with two buffers running in parallel in order to greatly reduce noise (123dB signal-to-noise ratio and a mind-bogglingly low Total Harmonic Distortion rating of 0,0007%) and to push the output stage for a supremely free-flowing signal.

The Belfry's high 1Meg input impedance ensures that even pedals with a high output impedance can be used before it without any issues, while the low 200Ohm output impedance will guarantee a full frequency spectrum, independent from what's coming after the Belfry.

Hence you won't experience any tone colouration such as the dreaded over-pronounced and shrill highs, which can be typical for many lower quality buffers. With the Belfry, you will simply sound like you again. Nothing less, nothing more.

Powered by a standard 9V DC power supply, the Belfry internally converts this to 18V for massively increased headroom. This helps you preserve your precious core signal and consequently tone, including all the sparkling highs and that nice round and punchy low-end.

In addition, Belfry sports a super-small housing in order for it to fit on or even under your pedalboard without any problems.

So, plug in to the Belfry Buffer and hear your tone ring out as clear as a bell again.

Studio-Quality Dual Buffer - Perfectly restores your tone with zero colouration
Supremely low Total Harmonic Distortion of 0,0007%
Signal-to-noise ratio of 123dB
Extremely small footprint - Will fit on or under any pedalboard
True-Bypass switching
Powered by opt. 9V PSU
(9V DC, centre -, 2.1mm, ~10mA current draw)
Read more
MRP:$116.34 SAVE 18%
 1 in stock $95.80
Click for better price!
or call +44 20 7424 1960
quote 782212
KMA Audio Machines Dead Stag Fuzz/Distortion Pedal
Cat: 782215 Rel: 31 Jul 20
 
Distortion pedal
Notes: Deep black mud is covering his jaws, but the rising sun reveals the glancing brake draped antlers of a majestic dead stag. His massive blast of distortion will tear down even the thickest boondock wilderness and set the world on fire.

The Dead Stag is based on one of the most classic discrete fuzz/distortion circuits in pedal history. This design has been built into countless versions by many pedal builders along the last forty odd years, however KMA wanted to take the evolution further than ever before and give you a Big Muff style pedal, but one with many more tonal options and smart features to make as versatile a fuzz/distortion pedal as possible.

Beneath the active Bass/Treble EQ with a 15db cut/boost, KMA designed a parametric mid EQ with a 12db cut/boost between 400Hz and 2.4kHz. Apart from the internal Q Bandwidth control, every EQ control is on top of the pedal which gives you a ton of tonal options.

From a thick low-end rumble or spitty mid-range, to scooped mids or a low mid hump, everything is possible. The MUD control sets up the grade of distortion, while GROWL controls the overall volume.

In addition, you can choose between two gain levels with the high/low switch and give your high mids a boost at the end of the circuit by the smooth/sharp switch.
Read more
 1 in stock $169.82
KMA Audio Machines Fuzzly Bear Silicium Fuzz Pedal
Cat: 782224 Rel: 31 Jul 20
 
Fuzz pedal
Notes: Holy Spirit of the forest, the Fuzzly Bear fuzz pedal is here, so kick the Switch to unleash the beast!

The sound of this fuzz-pedal is influenced by an old rare and underrated fuzz box from the 1970s, the classic Jordan Boss Tone. The main reason though why this pedal did not conquer the world of effects back in the day, was due to its massive lack of bass. However, the fuzz could be heavenly and ranged from a snake's hiss, to a kitten's purr or it could just be downright nasty and trebly. When you found the sweet spot though, it had such a rich voice and all in a day when most fuzz boxes prided themselves on being overwhelmingly grainy or just downright harsh.

KMA refined the circuit to get the essence of that old-school sound, but with a modern twist. First of all, they brought back the low end and added a bias control to explore lots of new capabilities of this long forgotten pedal.

The essential SKIN/MEAT knob controls the bias of the circuit. You can dial in a sharp skinny fuzzy drive tone or a thick and meaty wall of furry. The GAIN control delivers a whole range of different fuzz shapes.

Back it off to get a dirty chunky overdriven tone, turn it up and your tone becomes thicker and thicker. Set the gain fully clockwise and magic will happen: The smooth decay turns into a starved and gated fuzz sound, perfect for classic tunes.

Powered by an optional standard 9V-18V DC PSU (negative center, 2.1mm, approx. 2mA current draw)

Every pedal is designed, assembled, silkscreened, tested and numbered by hand in our small workshop. Doublesided PCBs designed, tested and assembled by KMA were used, to guarantee a high quality standard and keep the price of the pedals reasonable. The use of an indestructible powdercoated die-cast enclosure ensures maximum durability.



Read more
MRP:$202.62 SAVE 23%
 1 in stock $155.49
KMA Audio Machines Logan Overdrive Pedal With Switchable Mid Boost
Cat: 782231 Rel: 31 Jul 20
 
Overdrive pedal
Notes: Logan is made to transcend the well-known boundaries of overdrive. It doesn't matter if a musician is looking for a pre-amp, a low/mid-gain drive or a screaming resonant cocked-wah sound, Logan will deliver the goods and more! Combined with KMA's active 3-Band EQ, including a fully parametric Mid-EQ with a separate On/Off-Footswitch, Pre or Post Gain position-switch and an expression-in for hands-free filter sweeps, Logan is sure to provide great tones and outstanding flexibility.

Logan's gain structure is carefully balanced for an open and super touch-responsive drive tone, giving you and your instrument ample room to be expressive. You could describe its sound as smooth and harmonically rich, but that would be selling it short. There's a true fire raging under the embers here, one that allows you add more hair, grit and sizzling depth as you pile on the gain, making Logan fit for anything from clean boost, amp-like breakup, indie clang to full-on rock machine.

It also sports an impressively high-headroom-design (up to 25 dB), enabling you to use Logan as a very versatile pre-amp too - all of you amp-less/cab-sim players can thank us later.

But what truly pushes Logan over the edge is its 3-band active EQ. The Bass and Treble EQ knobs are able to both boost or cut your signal by around 15 dB. This enables you to beef up thin-sounding single coils, add some chime to chunky humbuckers or get rid of boomy bass frequencies, when changing from a sweet 2x12 to a fat 4x12 cabinet. In addition, the tonal flexibility is even further extended by Logan's fully parametric Mid-EQ section, where the MID control lets you set your preferred mid frequency between 100 Hz to 2.5 kHz, while the CUT/BOOST control lets you cut or boost the selected frequency by up to 12 dB.

But the frequency fest doesn't stop there. Logan even sports a dedicated footswitch to activate or deactivate the Mid-EQ and a position-switch which lets you place it either before the main gain-stage (PRE) or after it (POST), opening up a whole world of tonal possibilities. Place the Mid-EQ post-gain to give yourself a level boost for solos or place it pre-gain to saturate your preferred frequency even more, effectively giving you a second gain-stage.

Then there's the kicker! You can take complete hands-free control of the Mid-EQ Frequency via a regular expression-pedal. This lets you make instant tone changes on the fly, as well as unleash everything from fast and quacky wah-like sounds to slow and enveloping phasery filter sweeps.

You'd think the feature-well would have run dry by now, but no, there's even more cool sonic secrets under the hood.

The pedal has been set at the factory to sound stellar right out of the box, however some people might want to tweak some more options to taste. Via a hole in the base plate, you get direct access to an internal trim-pot to set the bandwidth (Q) of the Mid-EQ. Turn it counter-clockwise for a broad bandwidth, for smooth frequency sweeps or turn it completely clockwise for really resonant sounds. Removing the base plate will reveal a second trim-pot, which enables you to blend in your clean signal with the overdriven tone, making Logan transcend the world of guitar. Bass? Drums? Synths? Vocals? Bring it on! This pedal will handle it all.

Logan really is an all-in-one overdrive solution and trust us, once you plug in you'll never want to turn it off again!

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, approx. 30mA current draw)
Read more
MRP:$215.69 SAVE 20%
 1 in stock $173.20
Click for better price!
or call +44 20 7424 1960
quote 782231
KMA Audio Machines Minos Germanium Fuzz Pedal
Cat: 782232 Rel: 31 Jul 20
 
Fuzz pedal
Notes: Conqueror of old lands and cursed with the unholy horned bastard son, King Minos has returned, filled with anger to deliver those ancient tones of fuzz-history!

The Minos is KMA Audio Machines' modern approach to the old-fashioned and beloved three- stage germanium fuzz sound, derived from and inspired by the legendary Tonebender MKII and the unique, but now hard-to-find Superfuzz pedals. However, much more than just mere recreations of these classics, Minos is a versatile tool for many different styles of fuzz sounds and music.

With the INPUT control, you can dial in the perfect amount of pre-gain and bass input. Turn it to the left and it gives you a gritty and crisp overdriven tone, which is perfect for garage and blues, while turning it in the other direction gives you a thick and woolly fuzz.

KMA's attempt of the 'Tonebender-ish' style of pedal has a much broader range of gain structures though. Sweep through any shades of dirty tone, from raunchy low gain distortion to thick angry fuzz.

Every combination of amp and instrument behaves differently, so to help tailor the pedal to your own rig, KMA added some additional tone-shaping controls. Tailor the bass response at the output with the three-way switch. This allows you to choose between lo-fi jangle, punchy low mid or a deep and boomy fuzz that will tear down everything! If it is all too shrill though, you can modify the high-end with the tone-cut, which tames the brightness on full gain.

The overall character of the fuzz can be changed with two internal trim-pots which set the bias of the second and third transistor. Change that bias at your own risk though, as it may unleash the wrath of the Minotaur!

Read more
MRP:$228.76 SAVE 20%
 1 in stock $184.09
Click for better price!
or call +44 20 7424 1960
quote 782232
KMA Audio Machines Moai Maea Analog Octaver Pedal
Cat: 782235 Rel: 31 Jul 20
 
Octaver pedal
Notes: Moai Maea is KMA Audio Machines' answer to long forgotten analog octaver tones. The pedal generates one higher octave and up to two sub-octaves, helping you generate a huge wall of sound by playing just one note.

The higher octave has an edgy and fuzzy character which is reminiscent of old late '60s early '70s octave-up tones, as used by legends like Hendrix or The Stooges. The sub-octaves turn your guitar into a filthy bass guitar with ground shaking lows. Choose between either the first (-I), the second (-II) or both together (-I/-II), which gives you the sought-after wall of sound.

The Moai Maea also gives you the possibility to create an individual mix of each generated octave and the original signal. To expand your soundscapes, the pedal features a serial buffered FX-Loop, within the clean path, plus a phase inverter to avoid phase-cancelation when mixing signals this way. Each octave section is foot-switchable. You can turn on and off the higher octave by jumping on the SHRIEK switch and the sub-octave by the DRONE switch.

So if you are looking for a pedal to you that extra edge for your guitar sound, Moai Maea might well be the nirvana you've been looking for.

Powered by an optional standard 9V-18V DC PSU (negative center, 2.1mm, approx. 20mA current draw)

The Moai Maea is an analog octaver and works monophonic only, not polyphonic! That means for a clean and perfect tracking, you have to play single notes because of the analog circuit design. Keep in mind that chords will sound glitchy, but charming anyway.

Every pedal is designed, assembled, silkscreened, tested and numbered by hand in our small workshop. External manufactured PCBs to guarantee our high quality standard and keep the price of our pedals reasonable. The use of an indestructible powdercoated die-cast enclosure ensures a maximum durability.
Read more
MRP:$247.06 SAVE 25%
 1 in stock $186.28
KMA Audio Machines Queequeg Sub Octave Generator Pedal
Cat: 782237 Rel: 31 Jul 20
 
Octave generator pedal
Notes: Guided by an immortal spirit and encouraged by the old seer's prophecy to plunge into the abyssal sea fulfilling his destiny. He is holding his weapon with ease willing to tame the tremendous beast and showing you the beauty of the deepest sounds. Queequeg - just one man to pave the way for your intense suboctave experience!

Queequeq is KMA Audio Machine's take on a simple, yet massive analog monophonic suboctave generating device. Our aim was to provide a super easy to use and ultra-fast tracking suboctaver in a small footprint that works equally well on guitar, bass and synth, so these classic earth-shakingly awesome tones can find their way to any setup out there.

With its one knob SUB control, you are able to dial in the right blend of the generated suboctave and your clean signal. Queequeq's quick tracking benefits from the all-analog circuit design, giving you a very organic and smooth suboctave sound.

Thickening up your tone slightly, blasting out faux bass-synth resonances or even filling in for a missing bass sound are just some of Queequeg's specialties. The SUB control goes from completely clean on the left, to 100% suboctave action on the right side and with different sonic blends in between.
Your search for an easy to set and great-sounding all analog sub octaver ends right here with the Queequeg.

Powered by an optional standard 9V-18V DC PSU (negative center, 2.1mm, approx. 10mA current draw)
Read more
MRP:$168.63 SAVE 16%
 1 in stock $141.61
Click for better price!
or call +44 20 7424 1960
quote 782237
KMA Audio Machines Strokkur Treble Booster Pedal
Cat: 782243 Rel: 31 Jul 20
 
Treble booster pedal
Notes: Iceland, a place full of myths, miracles and fairy tales. Mighty forces are hidden underneath the barren valley of Haukadalur. A geyser so graceful, that sees you stand still in awe of the pure power of nature. Its name is Strokkur, the namesake of KMA Audio Machines' Germanium Treble-to-full-range Booster.

Strokkur is KMA Audio Machines' inspired take on the iconic Dallas Arbiter Rangemaster. Well known for its power and exploding harmonics when pushing a tube amp on the edge of breakup, this pedal has helped shape and define legendary guitar tones throughout the ages. Now with Strokkur's updated and refined feature-set, these tones are ready to rock and inspire a new generation of players.

Strokkur is equipped with hand-selected NOS AC125 Tungsram transistors in order to stay true to the power and tone of the original, all while standing out from other germanium treble boosters on the market with its additional RANGE control and its two-band EQ-Section. This allows players to perfectly sculpt their own boosted tone, so it'll suit any amp, any instrument and any style!

With its RANGE control, you can dial in anything between the classic treble booster sound to a full range boost, giving you a meaty sound with tight low-mids. The BOOST control, although not in need of much explanation, is very powerful. Set it low and simply use Strokkur as a subtle tone shaper, or begin cranking it and hear your tone shoot and soar into Rock 'N Roll heaven with its mighty 17dB of boost on tap.

KMA added a passive TREBLE and BASS control to fine-tune your sound. TREBLE tames the high frequencies and the transients (>2.4kHz) when the boost is fully cranked, which helps you to quickly find the sonic sweet spot in combination with your amp. BASS helps to prevent overloading the amp by cutting lower frequencies (<240Hz), but leaves the low- mids untouched. Works especially well with humbucker guitars.

Unlike most germanium boosters on the market, Strokkur is fitted with an internal DC converter and hence works with every regular 9V DC supply without fuss. So, plug in your guitar and feel the force of nature!

Read more
MRP:$220.92 SAVE 17%
 1 in stock $183.01
Click for better price!
or call +44 20 7424 1960
quote 782243
KMA Audio Machines Tyler Two Channel Signal Splitter Pedal
Cat: 782246 Rel: 31 Jul 20
 
Signal splitter pedal
Notes: Can you hear the sounds coming from the woods? The steely strikes of an axe are echoing clearly through the forest, alongside the separated heavy thuds of chopped trees falling. It's Tyler - a man, rough and towering, wielding his steely axe with only one aim: Splitting up your sound!

KMA Audio Machines bring you Tyler - The Frequency Splitter. The ultimate tool for developing new sounds and pushing your creativity to new unprecedented heights.

Tyler is an active and variable two channel crossover/signal splitter, which divides your signal with HIGH PASS and LOW PASS paths. Both filters have a 12db/Oct. roll-off with a variable cut-off frequency from 20Hz to 3kHz.

Each channel has its own foot-switchable buffered FX-Loop to process your lows (WOOD) or your highs (STEEL) with independent effects loops in parallel. The MIX knob controls the ratio of the Low Pass and High Pass signals. The range goes from 100% LP over to a 50/50 ratio until 100% HP when set fully clockwise. The mix control has a flat response, with equally chosen cut-off frequencies for the LP and HP to avoid notches or bumps. If required, the LEVEL control can boost your mixed signal up to 14dB.

To avoid any phase-cancellation issues when external pedals are inserted, KMA also added a phase inverter and internal trim pots to better control the impedance for not only the main input, but also for each effects-loop. This is pretty handy when you want to insert your favourite fuzz pedal and get the tone just right.

Some examples of use: Bass players want to retain their low end while using their favourite fuzz or dirt pedal. Insert your dirt box in the highpass FX-Loop and adjust the cut-off frequency of the High and Low Pass to your needs. Dial in your preferred ratio of those Low and High Pass signals, engage the STEEL footswitch and you will never turn off TYLER again! You can also insert different modulation pedals, for example insert a lush phaser for the lows and a nice shimmering delay for the highs and TYLER will make it sound like two different guitars are playing at once. Mix up your modulation pedals with any dirt pedals, for a very pronounced and punchy sound all coming from one amp.

As you can see, TYLER is like a Swiss army knife for your tone, being both a sonic tool and a supreme source of creativity - so take your axe and let the magic happen.

Read more
MRP:$260.13 SAVE 15%
 1 in stock $220.04
Click for better price!
or call +44 20 7424 1960
quote 782246
KMA Audio Machines Wurm Metal Distortion Pedal
Cat: 782248 Rel: 31 Jul 20
 
Distortion pedal
Notes: This dark legend has been told for thousands of years. An old creature, full of grief and malice, it will bring destruction and terror over tracts of the land. Feel the fear and the destructive energy of that ancient monster, with the WURM.

KMA Audio Machines brings you the legendary distortion sound from the out of production Boss HM2 MIJ pedal. Its sound was a key element of the Swedish chainsaw metal, invented by Bands like Dismember and Entombed.

Taking the essential ingredients of this classic, while in the process developing a way more flexible metal-distortion pedal, KMA kept the classic active EQ section and added two more bands, giving a much wider range of tones to tailor your evil and gritty distortion sound. Each band has an internal trim-pot to change the centre frequency and fine-tune your tone.

To switch between the original HM2 high control and the KMA Audio Machines designed EQ bands, KMA added internal DIP switches for even more tonal variations.

Activating Switch 1 alone selects the WURM high-mids mode. To get the classic HM2 'chainsaw' high-mids character however, put switch 1 in the off position and switch 2 to on, crank the LOWS and the HIGH MIDS and rip that Swedish forest to shreds.

Activating both switch 1 and 2 together though gives you three bands, which are controllable via the HIGH MIDS control. TERROR dials in the malice and the evil distortion sound you are searching for! Crank it up and you will feel the rage of the ancient WURM.
Read more
MRP:$254.90 SAVE 31%
 1 in stock $175.92
Old Blood Noise Buffer Pedal With Switchable 3-band EQ
Cat: 782181 Rel: 31 Jul 20
 
Buffer pedal
Notes: An always on Buffer and switchable 3 Band EQ. The buffer is helpful for long cable setups or when using an overabundance of pedals. The EQ is helpful in tailoring frequencies to specific parts, guitar switches or using it as an always on EQ.

The Buffer is always on. The On/Off switch only activates/deactivates the 3 Band EQ.

Controls :

Low: Slide up to boost and down to cut a 100 Hz Shelf

Mid:Slide up to boost and down to cut a 500 Hz Bell

High: Slide up to boost and down to cut a 2 KHz Shelf

9VDC, 9 mA
Read more
MRP:$124.18 SAVE 10%
 1 in stock $111.92
Click for better price!
or call +44 20 7424 1960
quote 782181
150/52(ページ1/2)の商品
1  2  »

Filter

Effects pedals
DJ機器
Release Date
Featured
Close