Effects pedals

Notes: Allpedal Microdose

Advanced Analogue Optical Phaser The Microdose is an optical, stage selectable analogue phaser, handcrafted with our hyper-detailed approach to usability, and tone. The Microdose is the first phaser launched by AllPedal, sometimes liquid-y smooth, sometimes chewy and lush.

Beginning with the Level control, you can always dial in the perfect volume for your phase tone. It also gives you the ability to mix in additional dry signal for a pleasant, subtle phasing effect. This control can also take you into pitch modulation territory when set to 100% wet. Res adds feedback, which makes for those over-the-top phase tones we all know and love. The Depth control adjusts the intensity of the effect, giving you everything from vintage 70's phase tones to sounds from a sci-fi soundscape. The wide range Rate control allows for both extremely slow and extremely fast modulation. Coupled with the Multiplier knob and the Tap Tempo switch, getting your effect locked in to the beat couldn't be easier. Sixteen wave shapes are available via the Waveform control and the Wave Set selector switch. Lastly, the Microdose includes an Exp pedal input for controlling the Rate. It works with many instruments including electric guitar, synthesizers, and bass.

Microdose is proudly made by hand in Paducah, KY in the USA using the latest cutting-edge technology in the pursuit of ultimate tone.

Notes: The Seabee is a multi-chorus pedal that delivers the finest analogue bucket brigade chorus tones, but like any Beetronics, it goes a few steps further. By digitally controlling the chorus delay time, the Bees have created Harmochorus - a never-before-heard pitch shifting modulation that can certainly inspire new genres.

Three Chorus modes provide the classic, lush chorus and vibe sounds we all love, with each mode offering the ability to control the effect in different ways. Vary between two different speeds and/or depths, go from zero to full depth intensity, or even increase the chorus delay time for a whole new spectrum of sounds.

Three Harmochorus modes give you a unique and inspiring new approach to the effect. The easiest way to explain it's that, when clean, it sounds like angel bees are accompanying you, and when paired with some buzz, it sounds like a swarm of killer bees producing the most dangerous pitch shifting modulation are after you! You can choose between two different pitches and speeds, a combination of twelve chords and twelve different arpeggio patterns, or simply choose between thousands of random patterns.

No matter which mode you choose, the Seabee will navigate you to inspiring and creative places.

Its simple layout with only three knobs hides a multitude of possibilities with alternate controls, three ramp shapes, tap tempo, a 4-way tone filter, feedback control, and a rate that ranges from very slow to ultra-fast waves, even reaching ring modulator ranges.

There are two stereo output options, 16 onboard presets, full MIDI control, expression in, external tap and 4 input level options so you can process guitar, bass, all kinds of active pickups or synthesizers and still keep the bucket brigade in its sweetest spot?

It's hard to believe that an analogue chorus can be so complete, versatile, unique and intense - all at the same time. But get ready, because Tone Fishing is about to beecome a thing.

Analogue sound path with the finest bucket brigade chorus tones.
3 Chorus modes / 3 Harmochorus modes
Never before heard pitch shifting chorus with arpeggios and random patterns.
Truly expressive ramping gives you musical control.
16 Onboard presets, Tap Tempo, MIDI, Expression and more.
Selectable input level (supports guitar, bass, active pickups, synthesizers and more)
Hand-assembled in Los Angeles, CA.

Packaging Dimensions: 15.2 x 13.7 x 7.6 cm
Weight: 0.49 kg

Notes: The Nectar "Tone Sweetener" strikes aperfect balance between versatility and simplicity. It offers a wide range of tones, spanning from a vintage tweed-style crunch to a full-bodied overdrive, and even a modern high-gain fuzz that pairs wonderfully with any guitar, pedal or amp.

Use the mode toggle to switch between the DRIVE and FUZZZ modes, while the LEDS indicate the selected mode, even when the effect is bypassed. Fine-tune your sound with the TASTE control to set the perfect eq for each guitar or amp.

The Nectar's responsiveness is truly unparalleled, like a delicate bee collecting pollen. Every nuance of your playing is enhanced and sweetened in the best way possible, with plenty of headroom.

True Bypass Design
Power requirement: 9V, 30mA
Made in California, USA

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analogue/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There's even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current OD-200 system software

Premium Drive Tones with BOSS's Advanced Hybrid Design

The OD-200's next-generation hybrid design seamlessly brings analogue and digital clipping circuits together for the best of all worlds, putting a universe of expressive drive colours under your fingers. Twelve modes offer a variety of premium overdrive, fuzz, and distortion sounds, including a high-gain Brown mode derived from the acclaimed Katana amplifier series. And with the three high-performance "X" drive modes powered by BOSS's cutting-edge MDP tech, you'll experience enhanced definition, clarity, and dynamic response that's perfect for modern playing styles.

Powerful Gain Shaping with Series and Parallel Boosts

While each of the OD-200's 12 main drive modes sound fantastic on their own, you're able to craft tones even further with 15 switchable boost circuits. Placing the boost in series lets you create traditional stacked drive voices, complete with post-gain level to balance with the bypassed sound or kick up the volume for solos. The boost circuit can also be used in parallel with the main mode, enabling side-by-side blending for an unlimited range of unique drive textures.

Kill the Noise and Tighten Your Tone

With its integrated gate circuit, the OD-200 always keeps your signal clear and quiet when you're not playing. The default setting is a great starting point, providing gentle, transparent gating that works well for general playing styles. The decay and threshold controls can also be adjusted for super-fast gate performance when needed, perfect for bringing tightness to heavy modern styles that combine full-throttle gain with precision staccato riffing.

Dial in Sounds Fast

The OD-200 offers a ton of advanced capabilities, but remains as simple to use as any regular distortion stomp. With dedicated controls, you can quickly dial in the gain and overall level for any selected mode, then sculpt the tone with wide-ranging low, mid, and high EQ. There's also a multi-function parameter knob, which changes operation based on the group selected with the panel's parameter switch and LED status indicators.

Save and Recall Your Favourite Setups

The OD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Drive Circuit: Analogue + Digital

Modes:
12 modes
OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ

Memory: 127 + Manual
Nominal Input Level: INPUT: -10 dBu
Maximum Input Level: INPUT: +7 dBu
Input Impedance: INPUT: 1 M ohm
Nominal Output Level: OUTPUT: -10 dBu
Maximum Output Level: OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance: OUTPUT: 1 k ohms
Recommended Load Impedance: OUTPUT: 10 k ohms or greater
Bypass: Buffered bypass

Controls: ON/OFF switch, MEMORY/BOOST switch
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
PARAM button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: PARAM indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT jack, OUTPUT jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 220 mA

Expected Battery Life Under Continuous Use:
Alkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.

Accessories:

Leaflet "USING THE UNIT SAFELY"
Leaflet "To obtain the Owner's Manual"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight:

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height: (including rubber foot)65 mm / 2-9/16 inches
Weight: 600 g / 1 lb 6 oz
Weight (including battery): 670 g / 1 lb 8 oz

Notes: A chorus effect pedal to give a lush, ringing effect to any guitar line. This process especially lends itself to clean arpeggios and jangly chord sequences, giving the impression of width and spread. The CH-50 provides this across many settings to suit various guitar styles.

Adjustable Depth, Speed and Volume settings
9V battery or optional DC adaptor operation
Power supply: 9V battery (PP3 included) or optional DC adapter
Construction: Aluminium housing with rubber base
Controls: Depth, Speed and Volume
Dimensions: 115 x 68 x 47mm
Weight: 275g

In the box

The box for this item contains :

CH-50 chorus effect pedal
PP3 battery

Notes: A delay effect pedal for guitar or bass (or other instrument) with Time, Feedback and Level controls. A wide range of possible settings provide anything from quick doubling and slap-back effects to longer delay times for spacey echo overlays.

Adjustable Time, Feedback and Level control
9V battery or optional DC adaptor operation
Power supply: 9V battery (PP3 included) or optional DC adaptor
Construction: Aluminium housing with rubber base
Controls: Time, Feedback and Effect Level
Dimensions: 115 x 68 x 47mm
Weight: 271g

In the box

The box for this item contains :

DL50 delay effect pedal
PP3 battery

Notes: A 5-band graphic equalizer pedal for powerful and accurate tone shaping of clean or distorted guitar tones. This unit shines when used for pre-gain mid boosting to give a more focussed overdrive or post-gain scooping to sit heavy riffs back in the mix. Clean signals can benefit from cutting harsh frequencies or as a tone-dependent lead boost.

5 frequency + 1 master volume sliders
9V battery or optional DC adapter operation
Power supply: 9V battery (PP3 included) or optional DC adapter
Construction: Aluminium housing with rubber base
EQ controls: 100Hz, 300Hz, 1kHz, 3kHz, 5kHz, Volume
Dimensions: 115 x 68 x 47mm
Weight: 279g

In the box

The box for this item contains :

EQ-50 guitar EQ pedal
PP3 battery

Notes: A versatile overdrive pedal for guitar with separate Gain, Tone and Level controls. A wide range of tones are available from natural and open sounding mild drive tones to heavier saturated distortion with all points in between to cover different music styles.

Gain, Tone and Level adjustment
9V battery or optional DC adaptor operation
Power supply9V battery (PP3 included) or optional DC adapter
Construction: Aluminium housing with rubber base
Controls: Gain, Tone and Level
Dimensions: 115 x 68 x 47mm
Weight: 275g

In the box

The box for this item contains:

OD-50 guitar effect pedal
PP3 battery

Notes: Re-Built from the ground up - a complete redesign of the original Lo-Fi Delay.

Enter the realm of sonic exploration with Colortones LO-FI DELAY. Featuring three distinct delay voicings, the LO-FI DELAY is a grainy lo-fi, old-school analogue tape sounding dub style delay engine with momentary oscillation feedback and speed switching options.

At its core the LO-FI DELAY is a tempo synchronized dual channel delay with each channel having independent Regen and Time controls.

Controls include Delay Time, Regen, Feedback, Mix and a 'Splash' footswitch to momentarily send the delay into a predetermined amount of regenerative feedback and or Tempo Change.

The SPLASH footswitch also acts as a Tap Tempo control requiring at least 4 quick taps to calculate a new tempo.

Controls

Wet | Dry Switch

Wet Mode acts like a normal delay where the delayed repeats can be mixed against the Dry Signal with the decay time set by the Regen knob. When the SPLASH Footswitch is momentarily pressed the decay time switches to the Regen+ knob setting allowing for more or less regenerative delays while the footswitch is pressed.

Dry Mode is designed for running in a quite mode and only activating the delay while the SPLASH footswitch is held down. Great for adding dub style accents to certain stabs / phrases or adding splashes of ambient delay or moments of crazy feedback to an otherwise Dry signal.

Hi-Fi | Lo-Fi Switch

Hi-FI mode has a crisp hi-fidelity non-destructive repeated delay.

The centre and down positions are Lo-Fi modes where the resulting delay repeats are a little darker like a tape delay with a slight hint of mechanical tape warble. The Centre position uses a Lowpass filter in the delay feedback line where as the Down position uses a HighPass filter.

Division Knob

The Div knob sets the alternative delay speed when Splash is pressed while in Wet Mode. At 3 O'Clock Repeats are at Unity 1:1. Turning anticlockwise the repeats are Multiplied (Faster) in by either x2 or x3. Turning Clockwise from unity the repeats are divided (slower) by either 2 or 3.

Tech Specs:

True Bypass
Current Draw: 145mA
Input Voltage: 9V DC (center negative)
external power supply not included

Notes: Embark on a sonic journey of modulation with the RoundHouse, Colortones luscious multi mode tremolo pedal featuring three tweakable Modulation Modes, Reverb, Drive, Tap Tempo and Momentary Speed Multiplier

Modulation Modes

Optical Tremolo
Harmonic Tremolo
Vibe

Choose the Optical Tremolo mode for a classic, vintage tremolo sound with warm and smooth waveforms. The Harmonic Tremolo mode adds a more complex and modern sound that adds depth and dimension to your playing. Finally, the Vibe mode emulates the classic psychedelic sound of a rotating speaker, perfect for adding a unique flavour to your guitar sound.

With the addition of Tap Tempo and a Momentary Speed Multiplier, you can easily dial in the perfect tempo and add creative rhythmic variations to your playing.

The Reverb and Saturation (Grain) controls at the input of the modulation engine can be dialed in to excite the pulse and sustain of the effect.

Additional controls include: - Mode - Speed - Depth - Boost - Reverb - Grain - Phase - Waveshape Select - Momentary Speed Multiply and Tap Tempo.

Controls

Modulation mode switch

Select between:
Optical Tremolo
Harmonic Tremolo (Magnatone style Harmonic Tremolo)
Vibe

Wave shape switch

Select between Triangle, Sine and Square Wave. (Square is not selectable in Vibe mode)

Speed

Adjust Speed of the modulation

Mix

Adjust the Mix / Depth of the effect with the Dry signal

Reverb

The Reverb knob controls the intensity/mix of reverb added to the input feeding the modulation circuit. It is a classic Silverface amp style reverb with a static decay time.

Grain

Increasing the Grain amount adds an analog tubelike pre-saturation to the effect. At max it boosts/compresses the level slightly adding a soft overdrive.

Phase

Adjusting the Phase knob from its center position will change the duration of the 'on time' either towards the beginning or end of the wave cycle resulting in the modulation 'pulse' feeling more asymetrical or staccato.

Boost

Add or Cut the output Level by +- 4db

Tap

Manually set Tempo with by Tapping the Footswitch. Set to 1:1 Tempo.

A sustained hold on the Tap switch activates the Speed multiplier which, while depressed, ramps the speed up to a multiple of the current setting. At slower modulation speeds the ramp time is relatively slow, emulating a mechanical rotary speaker changing speed.

Bypass

Activates Relay Based Soft Touch True Bypass

Tech Specs:
True Bypass
Current Draw: 140mA
Input Voltage: 9V DC (center negative)
external power supply not included

Notes: Colortones SPRING REVERB II is an expressive, analogue voiced, vintage reverb engine hosting 3 versatile recreations of classic Reverb Units together with 2 independent modulation filters - Vibrato and RotoTrem.

Reverb Modes

STUDIO - Modern 90's Rack Reverb - A Warm and Natural studio reverb

TANK - 70's Electromechanical Reverb Tank with bright, wet acoustic room reflections

ECHOVERB - Based on the 90's Princeton PT2399 Echo Chips with pronounced delayed reflections/echoes.

The MOD knob adds an additional depth control for subtle Vibrato and RotoTrem FX adding a spatial dimensionality to the acoustic characteristics of the Reverberation.

Spring Reverb II captures the essence of iconic Reverbs while adding its own sonic characteristics. Whether you're looking to add a subtle touch of reverb to your playing or create expansive soundscapes, the SPRING REVERB II pedal is the perfect tool to take your playing to the next level.

Controls

Reverb Mode Switch

Select between : Classic 80's Studio Rack, 70's Tank, EchoVerb

Decay

Adjusts the decay time of the reverberation tail

Blend

Adjusts the Mix / Depth of the reverb effect with the dry signal. Noon / 12 O'Clock is 50/50 Wet Dry Mix, beyond noon edges toward a wet only sound

Tone

Tilt EQ style reverb tone control. Does not effect the dry signal tone. Noon / 12 O'Clock is unity

Mod

Adjusts the Depth of the vibrato like modulation within the Reverb engine, adding complex harmonics and spatial depth

LEDs

The Left LED indicates INPUT CLIPPING and will illuminate when the input signal is too hot. It also indicates when the SECOND LAYER of knob functions is active

Bypass LED indicates when the effect is active

Bypass

A short tap on the Soft touch footswitch activates True Bypass.

A Long press (500ms) tap will initiate the Layer 2 controls

Secondary layer controls

Micro tune delay time - EchoVerb mode only

Controls the master Speed/Time for the delay in the background of the EchoVerb Reverb engine

Boost

Allows for -+6dB output Boost. Noon is Unity

RotoTrem speed override

Controls the master Speed/Time for the RotoTrem Modulation. Add just a little to expand the depth of the Reverb or more to get a faster modulation

RotoTrem depth

Adjust the amount of the RotoTrem applied post Reverb.

Tech Specs:
True Bypass
Current Draw: 145mA
Input Voltage: 9V DC (center negative)
external power supply not included

Notes: HI POWER is Crazy Tube Circuits' next endeavour in pedal + amp-in-a-box overdrives recreating legendary sounds, following the success of Crossfire and Unobtanium.

It was inspired by the sonic combination of two British tone machines. The almighty Colorsound Power Boost meets the blistering high-headroom Hiwatt amp.

While the combination of these two units directly hints at the gear setup of David Gilmour and especially the gear used on Pink Floyd's album: Wish You Were Here (think the guitar solo sounds of "Shine on you Crazy Diamond", "Have A Cigar") the sonic options are endless.

The orange enclosure silicon transistor circuit (Colorsound Power Boost) can deliver from a transparent clean boost to an all-out fuzz driving a tube amp to sonic bliss. Crazy Tube Circuits set out to clone the original unit featuring the true-to-the-original spec BC184 transistors running on 18V DC (via an internal voltage booster circuit).

The ultra-flexible 2-band Baxandall EQ circuit can add bite and low-end rumble to any setup. Crazy Tube Circuits used a reverse log gain pot (labelled as volume), compared to the linear taper pot found in the original units and acted as an on/off switch, to be able to set the amount of boost/overdrive more precisely. While the earlier units didn't feature a master volume control (only as an aftermarket mod - Pete Cornish made an external unit master volume for David Gilmour's Power Boost) Crazy Tube Circuits chose to include one that is setup in a way so that when it is all the way clockwise it is bypassed. Later versions of the Power Boost had 9V power supply and were renamed as the "Overdriver" due to the lower headroom and their ability to drive the signal earlier. They were offered in a grey enclosure and can be seen in the gear setups of Jeff Beck, Marc Bolan, etc. Crazy Tube Circuits chose to incorporate this version as well with a flip of a toggle switch (PWR-ODR toggle switch).

On the left side of the HI POWER you will find an all-analogue circuit set out to emulate the sound and feel of a Hiwatt amp. Following the path of the famed British tube amplifier, this circuit offers authentic amp tone and feel resembling guitar tones from guitar greats like David Gilmour, Pete Townsend, Jimmy Page, Noel Gallagher to name a few. From the big bold high-headroom clean sounds to the face-melting crunchy tones.

True to the last detail, Crazy Tube Circuits have included the full EQ section along with a presence control located at the negative feedback of the power amp simulation circuit. A headroom toggle switch selects between the high headroom 100w power section provided by a quartet of EL34s (think Hiwat DR103), or the lower headroom and compression provided by a 50W power section with a pair of EL34s when hit hard (think DR504). Similar in operation to the original amps the master volume was designed to produce more gain at higher settings.

Crazy Tube Circuits taken the design a step further by adding a switch to select between input channels of the amplifier. You can select between the full response of the normal channel of the amplifier, the increased presence and tight low end of the bright channel input or the "Gilmour-ish" enhanced frequency response and added gain of those inputs linked together. This follows the modifications that Pete Cornish did to all David Gilmour's Hiwatt amps.

Like their other dual overdrive/amp-in-a-box designs, Crazy Tube Circuits also included a passive effects loop to give you the option to connect your beloved pedals between your booster/overdrive and amp in a box or use the two sections as separate and independent effects when using an external bypass switcher/looper. Gilmour enthusiasts will love to insert their Big Muff, Tube Driver and Phase 90 in there. Note that all pedals inserted in the passive effects loop are still in the signal chain when any or both sections of HI POWER are in bypass.

HI POWER features a power-up bypass/engage pre-set function for the footswitches. That way you can select which state your pedal will go to when you plug the power supply. This function comes in especially handy to people that use remote pedal switchers / loopers as they only set the state of the pedal once and then operate from the controller.

All-analog dual booster/overdrive - amp in a box.
Recreates the tones of the legendary setup used by David Gilmour in the recordings of Pink Floyd's Wish You Were Here album.
Right side: Faithful reproduction of the Colorsound Power Boost/Overdriver circuits with true-to-the-original-spec BC184 transistors.
Controls: gain, bass, treble, master, voicing toggle.
Wide gain range control: from transparent boost to gnarly and fuzzy overdrive.
Two-band (treble & bass) Baxandall EQ.
Master knob sets overall output. Huge amount of dB boost available.
Toggle switch to select between the 18V Power Boost style circuit or the 9V Overdriver style circuit.
Left side: Hiwatt AMP in a box overdrive.
All analog simulation of the preamp and power amp sound and response.
Controls: gain, bass, middle, treble, master, input channel toggle switch, headroom toggle switch.
Gain control: from clean to big bold British crunch/overdrive.
3-band Hiwatt style EQ (bass, middle, treble).
Presence control follows the original design/is located at the negative feedback of the power amp simulation circuit to control the amount of upper mid and high frequencies.
Master knob sets overall output volume. Designed to respond like the original control producing more gain at higher settings.
Input channel toggle switch selects between normal, bright, or linked input channels of the AMP for different voicing and gain levels.
Headroom toggle switch selects between the high headroom and dynamic response of a 100W amp or the lower headroom and compression of a 50W power amp.
Independent operation of the BOOST/OVERDRIVE and AMP sections
Click-less true bypass design via high-quality relays for each section.
2 Footswitches / 2 Status LEDs - one for each effect section.
Power-up bypass/engage preset function for the footswitches.
Top-mounted jacks
Passive series effects loop to connect pedals between the two sections or use them separately as independent effects.
Power Supply: Use only 9V DC, 2.1 mm x 5.5 mm, center negative (not included).
Runs internally at 18V DC (via voltage doubler circuit) for higher headroom and tube-like performance.
Current consumption: 84mA.
British Racing Green die-cast enclosure with color-coded lettering for the control section (orange for BOOST/OVERDRIVE section, white for AMP section).
Dimensions: (W x L x H): 119 x 97 x 53 mm.
Weight: 444 g.
Made in Greece.

Notes: Memphis Vibrato was designed as the "small brother" of Crazy Tube Circuits' Killer V- this was born out of high demand for a true pitch shifting amp-like vibrato pedal, without the drive section.

It features all analogue LFO and true-to-the-original-amp 2-stage pitch shifting circuit powered from an internal voltage multiplier for high headroom and improved dynamic response. A clean period correct preamp with up to 20db boost takes you back to the late 50s / early 60s.

With the intensity and speed knobs you can add a subtle shimmer , or a pronounced 3D acoustic image and musical feel with ear- pleasing vibrato effect for instant classic Lonnie Mack / Robert Ward sounds!

ALL WET - DRY / WET toggle switch selects between 100% modulated signal or places the dry unmodulated signal in parallel with the modulated signal. The latter setup was found in some of the original amps through "stereo" inputs and yields whirling phaser / vibe sounds.

Notes: The perfect companion now comes in a smaller package - introducing Sidekick JR by Crazy Tube Circuits!

Drawing inspiration from the original Sidekick pedal released back in 2019, the aim was to create a compact pedal that combines the most widely used time-based effects, suitable for any gear setup seeking 80s tones and beyond.

From the jangly, ambient, and shimmering sounds of New Wave, Shoegaze, and Synth Pop to the wet tones of Hair / Glam Metal. Crazy Tube Circuits' Sidekick JR offers even more sounds / algorithm selections compared to the original unit.

The modulation effects / algorithms take inspiration from classic 80s stompboxes. The "Ensemble" algorithm replicates warm and mild modulated chorus sounds, while the "dimension" algorithm enhances the 3D image of your sound without the typical chorus warble. The "flanger" algorithm draws from a classic flanger pedal set up as a slow chorus with mild feedback added for a more metallic sound.

The Echo / delay section provides the sweet and vibrant sound of a tape echo with a freshly installed tape running through a colourful preamp, or the pristine repeats of an 80s digital delay rack unit.

The Reverb section in Sidekick JR is inspired by definitive examples of 80s reverb rack units and offers two algorithm banks. Bank A includes all-time classic reverb sounds like "plate," "spring," and "hall," while Bank B features signature 80s reverb sounds like "gated," "exciter" (Crazy Tube Circuits' trademark big-hall reverb algorithm with almost infinite reflections and decay), and octave-up "shimmer."

To provide full flexibility in the smallest enclosure possible, Crazy Tube Circuits has devised a smart switching setup. The delay and reverb effect sections of Sidekick JR operate independently from each other, and the modulation is assignable to any of these sections as standard. With the addition of the XT footswitch (available separately), the modulation section becomes entirely independent and can be switched on/off (true bypass) on its own.
Crazy Tube Circuits' Sidekick JR also features a power-up bypass/engage pre-set function for the onboard footswitches. This feature allows users to select the state the pedal will go to when the power supply is plugged in. It's particularly useful for individuals who use remote pedal switchers /loopers, as they can set the power-up state of the pedal once and then operate it from the controller.

Notes: Inspired by the first digital delay rack units introduced at the beginning of the "digital audio revolution" in the mid-late 70's. These units had lower bit resolution and bandwidth compared to today's digital delay standards.

TI:ME is not your typical sterile and ultra clean digital delay. With separate analogue and digital paths to get best of both worlds, this retro inspired echo effect will warm up your tone. An all analogue signal path featuring a high quality opamp is used for the best reproduction of your dry signal. Two digital recording devices, along with carefully tuned filtering, placed in parallel with the dry path give you the most ambient delay unit you have ever heard. Think of a Model 113 rack unit; the repeats are really musical, reminiscent of worn tape echoes.

Each TI:ME unit is hand lacquered in copper colour and one of a kind!

Notes: Seeking to recreate the sounds of the Klon Centaur overdrive pedal and Dumble guitar amps, the Crazy Tube Unobtanium combines the holy grails of germanium diodes and all-analogue amp-in-a-box tone. Incredible value.

Supplier's Notes:
Introducing the Unobtanium, a rare sonic element born out of legendary tones.

A mythical overdrive meets the tone and feel of two iconic amplifiers. Crazy Tube Circuits have accurately recreated the circuit of the high headroom overdrive with the magic blend of clean and overdriven tones and added extra features for versatility. The amp-in-a-box section uses an all-analogue circuit to capture the essence of two legendary D-style tube amplifiers. From tube-like compressed fat clean to sweet singing overdrive with blooming harmonic overtones. Combine both sides for near infinite smooth sustain and enter sonic bliss while a passive series effects loop gives you the option to connect your beloved pedals between the overdrive and amp section, building your ideal rig

Right side: K-style pedal overdrive circuit including the fabled germanium diodes
Controls: gain, treble (tone), volume, bypass mode and clipping / compression
Wide gain range control: from transparent boost to high headroom overdrive
Treble control is an active circuit to boost or cut treble
Volume knob sets overall output. Huge amount of dB boost available
Toggle switch to select between the original buffer bypass to add clarity and run long cables or
true bypass
Toggle switch to select between stock clipping / compression or enhanced gain and
headroom/output

Left side: D-style Amp in a box overdrive
Controls: gain, emphasis, tone, volume, amplifier voicing toggle
Gain control: from clean boost to sweet singing overdrive
Emphasis control is a pre-drive EQ to control presence and bottom end response
Tone knob controls the amount of post overdrive high end frequencies
Volume knob sets overall output. Match bypassed volume or use as a clean boost or preamp
Toggle switch selects between 2 distinct D-style overdrive circuits
SSS: clean and transparent overdrive with natural organic compression
ODS: higher gain overdrive with enhanced mid frequencies and harmonic overtones
External footswitch input to select amplifier voicing (bypasses on board toggle switch)
Internal trimmers adjust EQ and volume boost of D-style overdrive voicings

Features:

Dual overdrive with independent operation
Two legendary sonic elements combined in one device
Passive series effects loop to connect other pedals between the two sections or use them separately
Runs internally at 18V DC for higher headroom and tube-like performance
Exceptional pick attack response - almost infinite smooth sustain when both sides are combined
Top mounted jacks
Click-less True Bypass design via high quality relay
Power Supply: Use only 9V DC center negative power supply (not included)
Current consumption 83mA
Pebble grey die-cast enclosure with black ink in old school type print
Made in Greece

Notes: Envelope with filter with serious attitude

This mangled, filter-sweeping, abruptly overdriving pedal is designed to respond to your playing. It syncs its wave-thumping movement with the force at which you play. It multiplies dynamics into a hyper-exaggerated frenzy. It adds just the right amount of movement to punch through the mix and it reacts to an external trigger of your choosing to follow your tempo. Six selectable frequency ranges mean you're always gonna have just the right quack and oomph for whatever's plugged in! The sounds are wild, the thump is thick, and the animation is deep.

Controls

Input: Plug an instrument in to this jack.
Trig: Plug another instrument in to this jack and use it to trigger the filter sweep.
Out: Connect this to the amplifier.
Sensitivity: Determines the point at which the filter engages and the frequency range of the filter shift in relation to the input amplitude.
Intensity: Simultaneously blends in the resonance, amount, and grit of the filter.
Vol: Adjusts the output volume of the DEEP ANIMATION.
Frequency Selector: Selects the frequency range of the filter.
Bypass: True bypass the effect.
Up / Down: Controls the polarity of the filter decay once triggered. UP sweeps the frequency from higher frequencies to lower ones and DOWN, the opposite.
Additional Features: There is a subtle light to indicate the external trigger behind the main bypass LED.

Specifications

Dimensions: 5.92" x 4.72" x 2.34" (including hardware).
Weight: 21 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).
Current Draw: 18 mA.

Notes: The DISTURBANCE is an extreme filter, flanger, and phaser with modulation like you've never heard before.

DISTURBANCE's controls allow for a wide range of sounds to be sculpted perfectly to your needs. The 'Tensity' knob changes the feedback amount and structure of all effects, with two totally different intensity options to choose from for each disturbing modulation. The Filter allows for deep swells and piercing resonance with highpass and lowpass options.

The Flanger creates a classic modulation sound with options for watery, multi-tap delay matrixes or a screaming flange with distorted feedback. Last but certainly not least, the Phazer mode is a psychedelic 8-stage phaser sound with options for mellow filtered scoops on one side and combination phaser/flanger on the other.

But that's not all - the pedal introduces a brand-new way to control an effect: The custom designed modulation core lets you pause the LFO where it stands and listen to the strange world of frozen modulation. Not only does this new system control its own sounds, the DISTURBANCE includes a CV OUT jack which lets the modulation control signal be sent to whatever device dares let it in.

Go forth and DISTURB and bend, break, and twist your sound!

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


The DISTURBANCE is an extreme filter, flanger, and phaser with modulation like you've never heard before.

DISTURBANCE's controls allow for a wide range of sounds to be sculpted perfectly to your needs. The 'Tensity' knob changes the feedback amount and structure of all effects, with two totally different intensity options to choose from for each disturbing modulation. The Filter allows for deep swells and piercing resonance with highpass and lowpass options.

The Flanger creates a classic modulation sound with options for watery, multi-tap delay matrixes or a screaming flange with distorted feedback. Last but certainly not least, the Phazer mode is a psychedelic 8-stage phaser sound with options for mellow filtered scoops on one side and combination phaser/flanger on the other.

But that's not all - the pedal introduces a brand-new way to control an effect: The custom designed modulation core lets you pause the LFO where it stands and listen to the strange world of frozen modulation. Not only does this new system control its own sounds, the DISTURBANCE includes a CV OUT jack which lets the modulation control signal be sent to whatever device dares let it in.

Go forth and DISTURB and bend, break, and twist your sound!

Notes: An 'otherworldly' take on the classic delay pedal from Death By Audio, with the addition of a fuzz circuit allowing you to dial in grit and texture as well as ethereal atmospheres with shimmering feedback.

Supplier notes:
Lush Modulating Echo

A powerful, ethereal, and nuanced delay pedal with otherworldly controls. Push the feedback for vast worlds of colourful sound. Introduce a bit of warble with the modulator for ghastly chorus tones, or a ton of it to absolutely warp the delayed signal. Once your delay is thoroughly contorted, turn up the fuzz and pulverize it into repeating, shattered pieces. This is the preferred echo for recording engineers and touring pros around the world because, simply put, it just sounds that good. From delicate, beautiful sounds to yawning voids of fuzz and feedback, the Echo Dream II is ready to transform anything you throw at it.

Controls

Master: Sets the overall volume.
Fuzz: Sets the amount of gain, from clean to fuzzed-out bliss.
Delay: Sets the volume of the delayed signal.
D Time: Controls the delay time (numbers shown in milliseconds) between 20 ms and 1 second. Long delay times can create flutter, noise, and distortion.
FBack: Controls the feedback of the delays, from slapback to wild runaway oscillation.
Left Toggle: Up for clean blend, down to kill the dry signal and hear only the repeats.
Speed: Controls how fast the modulator runs.
Depth: Sets how far the modulator will swing the delay time. At high intervals, the pitch of the repeats will shift several semitones!
Right Toggle: Up for a smoother modulator waveform, down for a sharp, square-shaped wave.

Specifications

Dimensions: 5.87" x 4.72" x 2.35" (including hardware).
Weight: 21 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).
Current Draw: 40 mA.

Notes: Psychdelic Vocal Trip

Designed for vocals, the Echo Master is a lo-fi, analogue tape-style delay unit that can transform your voice into a chaotic realm of noise and feedback. The effects loop allows additional effects to be placed in the signal chain, making it easy to use with any of your favourite effects pedals on your vocal sound without any adapters.

The Echo Master is not just a delay unit, however. It utilizes matched Bourns transformers on the input to create a vibrant-sounding and feedback-minimizing preamp to bring you phenomenal vocal quality before you even hit the PA. Your sound engineer will hate you because you'll sound better than ever without their help. Top it off with high-quality Neutrik XLR jacks and the Echo Master is the ultimate tool for taking total control of the sound of your voice.

Controls

Time: Controls the delay time, with numbers labelled in milliseconds. In the Red Zone, the delay chip is pushed to the extreme. The signal decreases in fidelity as the time increases.

F-Back: Controls the number of repeats in the delay circuit, anywhere from one to an infinite to a wall of oscillation.

Mix: Controls the level of the delayed channel in comparison to the dry signal, from fully dry to an equal mix.

Send/Receive: Plug out of the Send jack into any additional effects, then back into the Return jack to introduce new sounds into your vocals. This loop is before the delay line, allowing you to affect your dry vocals as well as the delay generated by the Echo Master.

*Alternate Backplate: Back in stock baby! The Echo Master can also be purchased with a backplate that mounts to your mic stand. Puts the pedal within hands reach to maximize live performance tweak-ability. This recently upgraded V3, comes with a handgrip screw for more torque (although it resembles the V1, this is a much sturdier model). **Please note- cords, microphone, and stand are not included.

Specifications

Dimensions: 6.09" x 3.45" x 2.75" (including hardware).
Weight: 16oz. (w/ Alternate Back Plate 30oz.)
Power: 9V (runs on standard 2.1mm negative center 9V adapter).
Current Draw: 25 mA.

Notes: For the truly wild

Psycho multimode filter with an ultra-sleek, laser-etched enclosure. Its medical-grade IC chip creates a hyper-precise filter that sounds like no other. With high pass, bandpass, and low pass modes, as well as two types of screaming resonance, the Evil Filter is ready to saw any sound into pieces - or just be the most insane wah you've ever heard. The Evil Filter's two fuzzes take signals into a much more twisted dimension, creating a blooming compression that's perfect for ripping solos and walls of noise alike. Push it past the limit into octaves up, down, and snarling wavefolding sounds. Using the CV/Expression input, you can also control the filter cutoff frequency with an expression pedal or synthesizer.

Controls

Filter Freq: Cutoff frequency of the filter. Numbers shown are in Hz.
Filter Output: Volume of the filter section of the pedal.
Filter Selector: Selects between the different filter types - Low Pass Symbol Low Pass, Band Pass Symbol Band Pass, and High Pass Symbol High Pass.
Filter Resonance: Sets the resonance of the filter in conjunction with the Resonance Switch. WARNING: Will self oscillate at high levels!
Resonance Switch: Sets the range of the Filter Resonance knob between Normal and High.
Fuzz Output: Volume of the fuzz section of the pedal.
Fuzz Type Switch: Choose between two different fuzzes - Low Gain Fuzz Symbol lower for a cleaner, more driving fuzz, High Gain Fuzz Symbol higher for a blasted out, blooming, insane fuzz.
EXP/CV Input: Plug in CV control (~0-3.0v) or an expression pedal for external control of the Filter Freq knob. The Filter Freq knob sets the range for the EXP/CV input.

Specifications

Dimensions: 7.75" x 4.72" x 2.4" (including hardware).
Weight: 25 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).
Current Draw: 21 mA.

Notes: Lo-fi looks, killer sound. Serious filth here from Death By Audio. Surprising versatility with simple controls, offering mild overdrive if you want but specialising in grimy fuzz.

Supplier's Notes:
Call in the Army, the Navy, Scotland Yard, your mom, and the Mario Brothers! You'll need all the help you can get to stop this endless wall of fuzz from raging! This kill-all circuit explodes the meanest, nastiest, most insane distortion to make you the ruler of the fuzz universe.

This Death By Audio pedal has hand spray-painted graphics covering up meaty components and sound, giving you a high-tech fuzz mutilator at a punk rock price. With three knobs it can create a multitude of ultimate fuzz, boost, overdrive, and distortion sounds. Listen for yourself and you will see, this is the thickest-sounding sustaining fuzz pedal we have ever heard.

Controls

Volume: Controls the overall output level.

Fuzz: Controls the gain of the fuzz circuit. At its lowest setting the pedal just acts as a tone shifter. As the fuzz knob is turned up it sweeps from a booster to an overdrive to a thick distortion to a full on blown out war of fuzz.

Tone: A specially designed multi-curve shaping filter which changes the timbre of the pedal from super deep bass sludge to screaming highs.

Specs

Dimensions: 5.87" x 4.72" x 2.5" (including hardware)
Weight: 18 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery)
Current Draw: 1 mA

Notes: The Germanium Filter is Death By Audio's love letter to sticking a pencil in your speaker.

Start with a console-style drive circuit, add in a dash of obsolete germanium transistors and finish it off with a super intense DBA-style filter - BLAMO! You've got a sound heavy enough to crush on and sharp enough to slice a tomato.

The Filter control is extremely unconventional - it'll take you from bottomless, sub-woofered out lows to super searing and brittle highs, with a universe of tone in between. The Germanium Filter will help you find the sweet spot for your instrument in any situation - at a show, in the studio, or even stranded on the side of the highway after your tour van catches fire - hey, it happens!

The Gain knob starts with a dirty boost that then spans through saturated drive, spitting distortion, and a blistering fuzz tone. Get ready for your sound to be cranked up to infinity-and-a-half and captured on tape by the most incredible recording engineer you've ever heard - only there's no engineer and no studio. Just you, your guitar, your amp and the Germanium Filter.

Controls

Filter: Controls the frequency response of the pedal, featuring huge low end, scooped mids, and sharp, piercing highs.

Gain: Sweeps from mild overdrive to blasted-out fuzz. Very interactive with your guitar's volume control.

Volume (internal): Controls the overall output level of the pedal.

Specifications

Dimensions: 5" x 2.5" x 2.25" (including hardware).

Weight: 10.6 oz

Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).

Current Draw: 5 mA.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


The Germanium Filter is Death By Audio's love letter to sticking a pencil in your speaker.

Start with a console-style drive circuit, add in a dash of obsolete germanium transistors and finish it off with a super intense DBA-style filter - BLAMO! You've got a sound heavy enough to crush on and sharp enough to slice a tomato.

The Filter control is extremely unconventional - it'll take you from bottomless, sub-woofered out lows to super searing and brittle highs, with a universe of tone in between. The Germanium Filter will help you find the sweet spot for your instrument in any situation - at a show, in the studio, or even stranded on the side of the highway after your tour van catches fire - hey, it happens!

The Gain knob starts with a dirty boost that then spans through saturated drive, spitting distortion, and a blistering fuzz tone. Get ready for your sound to be cranked up to infinity-and-a-half and captured on tape by the most incredible recording engineer you've ever heard - only there's no engineer and no studio. Just you, your guitar, your amp and the Germanium Filter.

Controls

Filter: Controls the frequency response of the pedal, featuring huge low end, scooped mids, and sharp, piercing highs.

Gain: Sweeps from mild overdrive to blasted-out fuzz. Very interactive with your guitar's volume control.

Volume (internal): Controls the overall output level of the pedal.

Specifications

Dimensions: 5" x 2.5" x 2.25" (including hardware).

Weight: 10.6 oz

Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).

Current Draw: 5 mA.

Notes: The highly coveted Octave Clang has made a triumphant return to Death By Audio's Queens workshop. Long presumed extinct, the OC was never really gone, merely in a state of hibernation-evolving, refining, and enhancing its already extraordinary sound.

In the decade since it disappeared, Death by Audio have revisited the original Clang circuit, sculpting it into something better-a more ferocious, menacing, and thunderous force that is as usable as possible for today's musicians.

Embraced by professionals and punks alike, the vintage Octave Clang was created to unleash distinctly unconventional tones that captivated the senses. In this, it succeeded, but many users found it difficult to tame. Today, Death By Audio have refined and extended the range of the original controls, added a foot-switchable octave, and did some under-the-hood supercharging.

The resulting circuit is an insane yet versatile beast, empowering you to easily sculpt discordant ringing drones, visceral octave scrapes, and ground-shaking distortion. The revitalized Octave Clang is primed and ready to destroy!

Controls

Bypass (Left Footswitch): Turns the Octave Clang on and off (red LED).
Octave (Right Footswitch): Toggles the Octave Up mode (yellow LED). The yellow LED stays on/off when the pedal is bypassed to indicate if the Octave Up is engaged.
Volume: Controls the output level. Goes from totally silent to extremely loud. When set above your normal volume, it propels your chain into overdrive
Gain: Sets the gain of the Octave Clang. This can (and will) drive the rest of the circuit into overdrive and fuzz. Can provide up to +39dB of gain.

Tone: A powerful pre-gain tilt EQ, this control adjusts the amount of highs and lows going into the rest of the circuit. This can make the octave and fuzz react very differently. Overloading the lows yields a larger, more blown-out sound while overloading the highs gives a more cutting and clear sound.

Bias (Internal): Allows misbiasing the distortion circuitry. Leave this control in the middle (5-6) for standard functionality, or turn it left or right to skew the character of the distortion to a rougher sound.
Access this control by removing the back plate of the Octave Clang.

Specifications

Dimensions: 4.8" x 3.7" x 2.1" (including hardware).
Weight: 11.5 oz.
Power: The Octave Clang is powered by a standard 2.1mm 9V DC adapter with a centre-negative polarity. Isolated power supplies are recommended. It is also possible to use the Octave Clang with a 9V battery (not provided). When not using a battery, the internal battery snap should be attached to the corresponding battery snap holes on the board. This will prevent the contacts from shorting out against the circuitry. Do NOT leave the battery snap floating inside the pedal when not using a battery.
Current Draw: 10 mA

Notes: Blistering Reverb

The original synthetic atmosphere creator. The Reverberation Machine offers up drippy, saturated spring reverbs and cavernous expanses in one small package. Push the Altitude and hear the reverb blasted with gloom and distorted shimmer for the ultimate wall of sound. An instant classic for a reason, the Reverberation Machine's unique and experimental sounds are equally at home twisting your sound into a galactic nebula or adding a sinister and yearning beauty to anything you plug in.

Controls

Vol: Controls the master output volume.
Altitude Control: This is similar to gain. Turn it up to bring in a more wide open, distorted sound.
Verb: Blends in the amount of reverb.
Dark/Light Symbol: Dark cavernous reverberation to bright shimmering reverberation.

**When the Altitude and Verb controls are turned past 12 o'clock, the pedal can produce potentially harmful volumes, white noise, and other artifacts**

Specifications

Dimensions: 4.86" x 3.67" x 2.06" (including hardware).
Weight: 14 oz.
Power: 9V (runs ons a positive ring, negative tip 9V DC adapter or included 9V battery).
Current Draw: 66 mA

Notes: Ultra-versatile stereo reverb pedal with eight contrasting algorithms for flexibility and character. Expression pedal highly recommended for real-time hands-free modulation.

Supplier's Notes:
Space Reflections

ROOMS is a stereo, multi-function digital reverb capable of searing volume, gated walls of sound, and long, trailing reverberant ambiances with an intuitive array of controls designed with live mood-bending in mind.

ROOMS was designed to the highest standards of flexibility and audio fidelity. A studio-quality mixer section provides independent DRY and FX controls over six meticulously programmed reverb algorithms; ROOM, DIGIT, PEAK, GATE, WAVE, and GONG. Each different verb is capable of a universe of sounds, and ROOMS is here to help you explore them.

ROOMS' creative I/O switching and dual-mono dry signal lines allow for a wealth of possible mono and stereo configurations, making it easy to route signals for parallel processing or stereo amplifier setups.

Controls

FREQ: Controls the frequency parameter of the current mode.

DEPTH: Controls the depth parameter of the current mode.

TIME: Controls the reverb time in all modes.

DRY: Controls the volume of the dry signal, from -inf to 20x gain.

FX: Controls the volume of the reverb signal, from -inf to 20x gain.

ALT: Engages the ALT mode, switching between two sets of controls. When active, FREQ is controlled with the F knob, DEPTH with the D knob, and TIME with the T knob. Additionally, the ALT mode turns on expression control of either FREQ or TIME using the F?T Switch on the side of the pedal. NOTE: Expression control ONLY works in ALT mode and when an expression pedal is plugged in.

Expression Pedal: Almost any expression pedal will work with ROOMS. When not plugged in, the controls work as normal. NOTE: Expression control ONLY controls the F or T knobs when ALT mode is engaged and when an expression pedal is plugged in.

Modes & Parameters

FREQ knob : DEPTH knob

1 - ROOM: Tone of Decay : Pre-Delay
A classic reverb that simulates many different rooms.

2 - DIGIT: Delay Time : Delay Feedback
A filter matrix verb capable of creating otherworldly resonances and fractured repeats.

3 - PEAK: Filter Frequency : Filter Resonance
A super intense bandpass filter combined with an ambient reverb.

4 - GATE: Decay Tone : Gate Response Time
A gated reverb. Short reverb times create a classic gate effect, long reverb times create a controllable freeze effect.

5 - WAVE: Modulation Frequency : Modulation Depth
Creates a pitch vibrato effect. Lowering TIME will blend out the reverb signal, allowing sweeps from chorus/vibrato to long modulated reverbs.

6 - GONG: Modulator Frequency : Blends from Aliasing (left) to Ring Modulation (right)
Ethereal, crushed reverb sounds guaranteed to make you star in the upcoming remake of DUNE and live out your sci-fi fantasies of space travel and galactic domination.

Specifications

Dimensions: 5.95" x 3.86" x 2.96" (including hardware).
Weight: 18 oz.
Power: 80 mA, 9V (runs on a standard 2.1 mm negative center 9V adapter).

Notes: Space Bender

Chorus Modulator

LFO in the UFO

The Space Bender chorus modulator replicates and warps your signal into beautiful and organic transmissions from a dimension somewhere beyond linear time.

Under the hood lies an array of dynamically modulated delay lines allowing you to craft subtle vintage sci-fi sounds, bending sonic bedlam, and pulsing atmospheres. Never again will you say this chorus pedal just isn't intense enough! These in combination with the rocker switch settings let you move smoothly through a wide range of effect types allowing for new ways of thinking and experimenting with modulated delay, chorus, and flanger.

Stretch and pull your sound waves to craft glassy bell resonances, massive reverse dive bombs, and seasick demon drones with a simple (but deep) interface. The spectrum of living, breathing sound manipulations stowed within the Space Bender serves as an interstellar gateway for the next wave of musicians to create a universe of haunting and unexplored soundscapes.

See you on the other side!

Specifications

Dimensions: 5" x 2.63" x 2.45" (including hardware)
Weight: 9.3 oz.
Power: 9V DC (runs on standard 2.1mm negative center 9V DC adapter).
Current Draw: 65 mA.

Notes: The DigiTechr Mosaic Polyphonic 12-String effect pedal sets you upon the path of creating lush 12-string sounds with either 6-string electric or amplified acoustic guitars. Immediately identifiable 12-string tones are now yours with octave low strings and doubled high strings. Single notes and full chordal strums shine with polyphonic richness and celestial movement that will inspire you. The Mosaic's balanced low-end response with crisp octave shimmer produces a tone that's lush and articulate, just as with a 12-string guitar.

Tailor the Mosaic's sound with the independent Level and Tone controls. Level will control the 12-string effect intensity while Tone shapes the overall brightness of the effect. The Mosaic will give you a richer, more resonant and full tone than a standard six-string guitar. It is true bypass and uses a 9V DC power supply to easily integrate into your existing pedalboard.


General Specifications
SAMPLE RATE

44.1 kHz
FREQUENCY RESPONSE

20 Hz-11 kHz (Effect Enabled)
SIGNAL TO NOISE RATIO

> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD

0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
A/D/A CONVERSION

24-bit
INPUT

1/4" Unbalanced (Tip-Sleeve)
OUTPUT

1/4" Unbalanced (Tip-Sleeve)
CONTROLS

Level, Tone
TRUE BYPASS

Yes. True bypass circuitry preserves your tone when the pedal is not in use.
Dimensions
LENGTH

4.75" (120mm)
HEIGHT

1.75" (44mm)
WIDTH

2.875" (73mm)
WEIGHT

0.36 lb. (163g)

Notes: DigiTech announces SDRUM Strummable Drums, the first-ever intelligent drum machine for guitarists and bassists. Boasting studio-quality samples and five professional sounding drum kits and BeatScratch technology, SDRUM allows users to create drum patterns by simply strumming strings.

As a player scratches across guitar or bass strings, he or she "teaches" SDRUM a kick/snare pattern that defines a desired beat. Once that pattern is established, SDRUM then enhances and enriches the beat, resulting in a realistic accompanying drum part. From the five different kits, users are able to choose sounds appropriate to a broad variety of musical styles. Via the KICK and SNARE Pads, players can audition the various kits and tap in specific beats, while the GUITAR AUDITION Button enables the user to turn the drum output on or off while strumming.

Up to 36 songs can be stored in SDRUM, and the unit supports three different components - e.g. verse, chorus, bridge - for each that can be switched on in real-time to easily facilitate live performance and aid in composition and creativity. Additionally, JamSync functionality facilitates compatibility with JamMan loopers, further boosting SDRUM's capacity in concert, practice, and studio settings.

The compact SDRUM (5.25" x 3.15" x 2.3") is similar in size to most compact effects units and fits easily on standard pedalboards. A sturdy metal chassis, robust footswitch, and four knobs (GROOVE/KIT, LEVEL, TEMPO, and HAT/RIDES) ensure that SDRUM is stage- and road-ready.

Eliminating the need to sift through libraries of rhythm patterns in search of an appropriate match for individual songs and styles, SDRUM is the fastest way to go from a beat idea to a working drum track.

BeatScratch Technology
JamSync Support
Studio-quality samples
Five drum kits
Verse/Chorus/Bridge parts
Alternate instruments/voicings
External FS3X support
Kick/Snare pads
Controls: Tap Tempo, Verse/, Chorus, Bridge, Song, Groove/Kit, Hats/Rides, Level, Temp, Alt Kit, Alt Hats/Rides, Guitar Audition, Kick Snare, Footswitch
5.25" (L) x 3.15"(W) x 2.3" (H)/ 133mm (L) x 80mm (W) x 58mm (H)
1.12 lb./.51 kg
Power Supply (external - included): PS0913DC-04 (US, JA, EU, AU, UK)
Warranty: 1 Year

Notes: The DigiTechr Drop is a dedicated polyphonic drop tune pedal that allows you to drop your tuning from one semitone all the way down to a full octave. Get down-tuned chunk without having to change guitars! The Drop also features a momentary/latching switch. With the switch set to momentary, you can turn the Drop into a true performance pedal. Fast trills and roller-coaster pitch dips are at the tip of your toes.

General Specifications
Input1/4" Unbalanced (Tip-Sleeve)
Output1/4" Unbalanced (Tip-Sleeve)
ControlsAmount, Momentary On/Off
A/D/A Converter24-bit
Sampling Rate44.1 kHz
Power SupplyPS0913DC-01 (US, JA); PS0913DC-02 (EU, AU, UK)
Drop Tune Range1-7 Semitones Down, Octave Down, Octave Down + Dry
Dimensions
Length4.75"
Width2.875"
Height1.75"
Weight0.36 lbs.

Notes: The TRIO+ is a simple-to-use guitar pedal that listens to the way you play and automatically generates bass and drum parts that match your song. Just plug your guitar into the TRIO+, press the Band footswitch to teach the TRIO+ your chords and rhythm, then press the Band footswitch again to start playing with your own personal band! Bass and drum levels can be adjusted for the perfect mix using the TRIO+'s Bass and Drums knobs. The TRIO+ also features a Simple Bass button lets you select between 3 bass line modes for busy or simple bass lines. Pushing the Band Creator™ paradigm further, the TRIO+ also allows you to loop and custom sequence your looped guitar parts to create full songs on the fly. Press the TRIO+'s Looper footswitch to record a loop along with an unlimited number of overdubs. The Loop level can be individually controlled using the TRIO+'s Loop knob. Loops can be recorded by themselves, operating just like a traditional looper, or along with the band. You can also apply built-in effects to your guitar signal by enabling the TRIO+'s Guitar FX button, or connect your favorite effects to the TRIO+'s FX Send and FX Return jacks. The TRIO+ provides 12 music genres to choose from including Blues, R&B, Rock, Alternative Rock, Metal, Pop, Electronic Pop, Hip-Hop, Country, Folk, Latin, and Jazz. 12 song styles are available for each genre and can be selected using the TRIO+'s Style encoder, including selection between 3/4 and 4/4 time signatures. Multi-colored LEDs around the TRIO+'s Style encoder indicate which styles best match your song. The TRIO+ can learn up to 5 different song parts, perfect for creating an intro, verse, chorus, bridge and outro. Song parts can be recalled on-the-fly as the song plays back or pre-programmed as a sequence for automated playback. An optional DigiTech FS3X Footswitch can be connected to the TRIO+'s Control In jack for additional handsfree control with 3 modes of operation to select from. Up to 12 songs along with loops can be stored to the TRIO+'s Micro SD Card (included). Need to create more songs? No problem. Just insert a new SD Card and you're ready to start teaching the band your new songs. To manage all your songs and loops on a computer, download the free Librarian Manager software from digitech.com, available for Windowsr and Macr. The TRIO+ offers independent Tempo, Genre, Style, Loop Level, Bass Level, Drums Level, Headphone Output Level controls; Guitar, FX Return and Control Inputs; Amplifier, Mixer, FX Send and Headphone Outputs; Built-in Guitar Effects (relative to music genre); a Soft Click Footswitch and includes a 9V DC adapter.

General Specifications
ControlsTempo, Genre, Style, Loop, Bass, Drums, Headphone Volume
Backlit ButtonsGuitar FX, Seq, Part 1-5, Alt Time, Song, Simple Bass
FootswitchesLooper, Band
LEDsGenre types, Style 1-12, Audiolastic, Looper, Band
JacksPower, Control In, Guitar In, FX Return, FX Send, Amp Out, Mixer Out, Headphone
OtherMini USB port, microSD card slot
Bit Depth24-bit
Sample Rate44.1 kHz
Signal-To-Noise Ratio110dB, A-weighted
Maximum Recording Time230 seconds per song part i based on a minimum 50 BPM and 48 bars per part
USB TypeMini-B
SD Card TypemicroSDHC, Class 10
SD Min/Max Storage Size8 GB/32 GB
Power Requirements9 VDC external power adapter
Power Consumption7.2 W
Current Draw800 mA
Dimensions
Length5.4"
Width4.25"
Height2.5"
Weight1.46 lbs.
Audio Output
Amp Output TypeUnbalanced, 1/4" TS
Amp Output Impedance1 kO
Mixer Output TypeUnbalanced, 1/4" TS
Mixer Output Impedance1 kO
FX Send Output TypeUnbalanced, 1/4" TS
FX Send Impedance1 kO
Headphone Output Type1/8" (3.5 mm) Stereo Mini Jack
Headphone Output Impedance120 O
Audio Input
Guitar Input TypeUnbalanced, 1/4" TS
Guitar Input Impedance1 MO
FX Return Input TypeUnbalanced, 1/4" TS
FX Return Impedance1 MO
Control Input Type1/4" TRS (compatible with DigiTech FS3X)

Notes: The legendary Whammy pedal is the premier pitch-shifting pedal for any guitarist's board, and it only gets better with time. In addition to the classic Whammy sound, we've added chordal Whammy pitch-shifting and true bypass.

Whammy artists have won over 60 Grammysr using its unique pitch-shifting sound to enhance their music. Its songs echo the hallways of the Rock & Roll Hall of Famer and generate acclaim on over 700 million albums around the world. There is no doubt why Whammy is one of the most common sights on guitarists' pedalboards.

The Whammy can bring new depth to your artistry. Turn your solo into raging, rebellious screams of tone or tame your crowd with highly expressive, ambient chordal bends. Energize your audience with a scratchy note frenzy, bring them in and out of the sound tunnel with musical bursts, or carry them through an existential exploration of full-fretboard pitch translation. The Whammy puts expression into the expression pedal.

Don't be the last guitarist without a Whammy! The iPB-10 unleashes the ability to create and control guitar effects like never before.

General Specifications
Sample Rate44.1 kHz
Frequency Response20 Hz to 20 kHz
Signal to Noise Ratio> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
A/D Conversion24 bit
D/A Conversion24 bit
Power Consumption2.4 Watts (< 265 mA @ 9 VDC)
Power Adapter9 VDC External Adapter
Dimensions
Height2.5"
Width6.5"
Depth7.75"
Audio Output
Output Type1/4" Unbalanced TS
Max Output Level+10 dBu
Output Impedance1 kO
Audio Input
Instrument Input Type1/4" Unbalanced TS
Max Input Level+5 dBu
Input Impedance1 MO
MIDI Input5-Pin Din

Notes: Introducing a new addition to the DigiTech Whammy Family -- Whammy DT! We've taken the premier pitch shifting effects pedal added drop tuning and true bypass to bring you the ultimate Whammy pedal, the Whammy DT. With the Whammy DT, you can modify your tuning without having to change guitars or pause awkwardly to make adjustments for the next song. Key changes are at the tips of your toes and take just moments, which is crucial when the audience is feeling your vibe. Pitch shifting effects really help your guitar performance stand out and the Whammy pedal has been the core pitch shifting effect for famous artists for over 20 years. Now add full drop and raised tuning in addition to classic Whammy shifting to your effects arsenal and find out why the Whammy DT is the premiere pitch shifting effects pedal for every guitarist.

General Specifications
D/A Conversion24 bit
Pitch Bend Range+2/-3 Octaves
Detune Range-4 to -30 cents
Drop Tune Range1-7 Semitones, Octave, Octave + Dry
Power Consumption2.6 Watts (< 288 mA @ 9 VDC)
Power Adapter9 VDC External Adapter
Sample Rate44.1 kHz
Frequency Response20 Hz to 20 kHz
Signal to Noise Ratio> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
Dimensions
Height2.36"
Width8.2"
Depth7.73"
Audio Output
Output Type1/4" Unbalanced TS
Max Output Level+10 dBu
Output Impedance1 kO
Audio Input
Instrument Input Type1/4" Unbalanced TS
Max Input Level+5 dBu
Input Impedance1 MO
MIDI Input5-Pin Din
Footswitch Input1/4" TRS - for use with optional FS3X Footpedal

What's in the box?
1 x Whammy DT Pedal
1 x Power Supply

Notes: The Whammy Ricochet lets you bounce your playing up or down in pitch in controlled or crazy shifts. A momentary switch and customizable independent rise and fall time ballistics, allow you to get the Whammy action you know and love without the use of a treadle. Just hold your foot on the footswitch and let the Ricochet do the rest. Seven pitch selections - 2nd, 4th, 5th, 7th, Octave, Double Octave, and Octave+Dry, as well as a toggle to select up or down for the selected pitch. The Whammy Ricochet also has latching footswitch mode so you can rise or fall to pitch and stay there, and an LED ladder that shows your shift trajectory at all times. All these controls combine to create classic Whammy pitch-shifting as well as new sounds never heard before.

General Specifications
ControlsBallistics Control, Pitch Control, Range Switch, Momentary Switch, Effect On/Off
Sample Rate44.1 kHz in classic mode, 22 kHz in chords mode
Frequency Response20 Hz-16 kHz (classic mode), 20 Hz-11 kHz (chords mode)
Signal to Noise Ratio> -106dB (A weighted); ref = max level, 22 kHz bandwidth
A/D/A Converter24-bit
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
Power Consumption2.1 Watts (235 mA typical @ 9 VDC)
Power Requirements9 VDC External Adapter (sold separately)
Power SupplyPS0913DC-01 (US, JA, EU); PS0913DC-02 (AU, UK)
Power Adapter Output9 VDC 1.3 A
Dimensions
Length4.75"
Width2.875"
Height1.75"
Weight0.8 lbs.
Audio Output
Output1/4" Unbalanced (Tip-Sleeve)
Max Output Level+10 dBu
Output Impedance1 kO (Effect enabled or effect bypassed w/ Momentary switch on) True Bypass (Effect bypassed w/ Momentary switch off)
Audio Input
Input1/4" Unbalanced (Tip-Sleeve)
Max Input Level+5 dBu
Input Impedance1 MO (Effect enabled or effect bypassed w/ Momentary switch on) True Bypass (Effect bypassed w/ Momentary switch off)

Notes: Designed in collaboration with Black Arts Toneworks, the Boneshaker is a dirty boost coupled with a powerful 3-band semi-parametric EQ. The Boneshaker can smack the front-end your amp into overdrive, or sculpt the tone of your fuzz to stand out in a mix. If your already dirty amp channel needs a little bit of a goose and you want full control over every frequency, the Boneshaker is just the ticket.

General Specifications
INPUT

1 x 14" instrument
OUTPUT

1 x 14" instrument
CHASSIS MATERIAL

All Metal
POWER SUPPLY

9V Alkaline Dry Battery or Optional Power Supply
Dimensions
HEIGHT

2.25" (5.71 cm)
WIDTH

2.63" (6.68 cm)
LENGTH

4.68" (11.88 cm)
WEIGHT

1.0 lbs. (0.453 kg.)

Notes: The Chthonic Fuzz (pronounced: Thawnic) creates fat, corpulent, fudgy, sludgy, fuzz tones that pair perfectly with single-coil, P90, gold-foil, and De-Armond style pickups. It also works great with PAF-style humbuckers, but this fuzz was designed with brighter guitars and amps in mind.

Starting with a beloved a single-knob '70's fuzz circuit, DOD experimented with adding a subtle tone control (Lustre), and then a separate gain control (Fuzz). This yielded a simple yet powerful fuzz with an earthy, dark flavour. Straight-up transistor clipping using a pair of 2N2222 transistors allows guitar volume knob clean-up like other classic fuzzes, but the Chthonic comes from a different dimension. Think of it as a kind of Colorsound Overdriver from an alternate universe.

The Chthonic's Kraken/Cthulhu graphics are courtesy of the same artist that did the Carcosa Fuzz art. The Chthonic is a psychotic dizygotic dark companion to the Carcosa Fuzz.

Darker fuzz designed for brighter guitars and amps
Subtle tone control retains pick attack throughout entire range
Excellent clean-up with guitar volume knob
Lightweight all aluminium chassis
Crisp blue LED
True Bypass
11.88 cm (L) x 6.68 cm (W) x 5.71 cm (H)
0.453 kg.
Power Supply 9V Alkaline Dry Battery orPS200R Power Supply
Manufacturer Warranty: 1 Year

Notes: Pairing an adjustable carrier signal with a revamped distortion circuit, the DOD Gonkulator essentially brings two effects into one chassis with controls for ring, frequency, gain and distortion. Capable of all the weird modulation goodness of the '90s original with the added ability to cover distorted experimental ground, this pedal pushes boundaries and makes statements with modulating effects limited only by imagination. From bell-like clangs to spastic robotic breakdowns, the Gonk demands attention.

General Specifications
INPUT

1 x 14" instrument
OUTPUT

1 x 14" instrument
CHASSIS MATERIAL

All Metal
POWER SUPPLY

9V Alkaline Dry Battery or Optional Power Supply
Dimensions
HEIGHT

2.25" (5.71 cm)
WIDTH

2.63" (6.68 cm)
LENGTH

4.68" (11.88 cm)
WEIGHT

0.62 lbs. (0.281 kg.)

Notes: "We meat again!" Proudly presenting the DOD Meatbox (2015).

Answering the call of low frequency freaks everywhere, the DOD Meatbox (2015) is an updated take on the cult favorite Meatbox from the '90s. As a bass subharmonic synthesizer and low-end enhancer, the Meatbox can produce a range of sounds from a slight thickening to a full-on, low-end assault! Use the Meatbox on bass guitars, extended-range guitars, synths, even drum machines and push all the air out of any room. If you're looking for a new way to move your audience, look no further.

More than just a low frequency boost, the DOD Meatbox (2015) can also cut frequencies for tone sculpting as an interactive EQ and even produce distortion depending on where the output level is set.

The DOD Meatbox (2015) offers independent Octave, Output Level, Subharmonic and Low Frequency controls. True bypass allows your tone to remain pristine even when the DOD Meatbox is off. This is a big difference from the original, which would colour your bypassed tone.

The modern 9V DC power supply input makes the pedal more pedalboard friendly.

Notes: Part of Dreadbox's impressive effects line-up, the Disorder is a rowdy fuzzbox crossed with a self-oscillating filter, serving up some pleasingly nasty tones. An envelope follower with CV output adds versatility.

Supplier's Notes:
The disturbance in physical or mental health or functions. It could be defined as a set of problems, which result in causing significant difficulty, distress, impairment and/or suffering in a person's daily life.

Dreadbox Disorder is a very aggressive fuzz pedal with a twist. It is equipped with a self-oscillating filter, that allows you to produce oscillating fuzz sounds.

Additionally it has a low pass and high pass filter, that makes it suitable for guitar and bass as well. Finally an envelope follower is also present, allowing you to create wah-wah sounds.

Specifications

Circuit: Analogue
Bypass: CMOS
Audio: Mono
Inputs / Outputs
IN/OUT: TS Unbalanced 6.4mm jack
Power Supply: 9VDC BOSS style center pin negative 2.1mm (Not included)
Dimensions (cm): 14 x 10 x 5.6
Current Draw: 50mA

Notes: Huge chorus-flanger. Take your music to infinity. The fully analogue Dreadbox Komorebi Chorus-Flanger Pedal gives you a huge array of sound design possibilities. This powerful pedal can add some serious impact to your sound.

It doesn't matter if you're playing bass, guitar, synths, or even if you want to hook it up to your modular Eurorack system. The Komorebi is ready to go. Sprinkling its beautiful effects over anything it touches.

From a slight pinch of flange to add some movement to your bass lines, or a lengthy chorus effect to treat your pads and chords to a final touch of space-age wideness. It's a guitar pedal but not as you know. Komorebi works with everything.

Current draw: 100mA

Notes: Designed to play nicely with guitars and synths alike, this OTA-based mono phase shifter excels at warm, characterful modulation. Three Eurorack-compatible patch points add creative options.

Supplier's Notes:
Lethargy derives from the greek word for forgetfulness, "Lethe". It is a state of being drowsy and dull. The feeling of having little energy or of being unable or unwilling to do anything.

Dreadbox LETHARGY is an OTA based Phase Shifter effect pedal suitable for fretted instruments and synthesizers, with eurorack patch compatibility.

100 mm wide
140 mm high
90 mA / 9 V DC / Negative Center

SPECIFICATIONS:

Circuit: Analog

Bypass: CMOS

Audio: Mono

Inputs / Outputs:
IN/OUT : TS Unbalanced 6.4mm jack
Manual / Rate / LFO Out : 3.5mm mini jack

Power Supply: 9VDC BOSS style center pin negative 2.1mm (NOT INCLUDED)

Dimensions (cm): 14 x 10 x 5.6

Current Draw: 90mA

Notes: The Dreadbox PSYCLOP is the ultimate modern utility device. It's an Effects Chain Loop with Dry/Wet mix control, Signal Attenuator and Boost as well as Expression to CV (Control Voltage) converter, all in one easy to use package suitable for string instruments or synthesizers and is also Eurorack compatible.

PSYCLOP is not your average Effects Loop Mixer. Capable of managing any type of signal from instruments or effects pedals, PSYCLOP seamlessly blends them with its parallel effects loop.

Its features include Input Attenuation of up to -20 dB and an Output Gain Boost of up to +20 dB in order to match any signals. For unity gain, simply set the Input Attenuation Amount to 100% with the IN control and using the OUT knob, adjust the Output Gain Level to 0%.

To avoid phase cancellation issues between the dry and wet signal paths, the PSYCLOP also features a simple but effective Effects Loop Phase switch, which is easily accessible on the pedal's side.

Additionally, PSYCLOP is capable of converting TRS Expression signals to CV and makes them usable with most Eurorack gear, making it a perfect device for synth fans and sound design enthusiasts. The pedal's EXP knob attenuates the CV output. When nothing is connected to its CV IN jack, the CV OUT jack will output 0-5V depending on this knobs' setting and a connected EXP pedal's position.

So all you have to do is plug in and embark on your next thrilling sound design adventure.

Notes: Another banger from Dreadbox's excellent effects series. Stereo echo effects based around multiple hybrid delay stages, giving bags of character for reverb, modulation effects and classic delays.

Supplier's Notes:
Dreadbox Raindrops is a Hybrid Delay/Pitch Shifter/Reverb pedal that takes the concept of short echoes to a different level.

It is equipped with multiple delay stages and different chips and you can choose between 3 different play modes, where in each one you can have a whole new experience and alternative soundscapes. You can achieve from simple short echoes, to long, dirty and lo-fi delays and from simple pitch shifting bursts to extensively lasting reverbs.

Specifications

Circuit: Analogue Dry signal / Hybrid Delay / Digital Reverb
Bypass: Buffered OpAmp
Audio: True Stereo IN/OUT
Inputs / Outputs: TS Unbalanced 6.4mm jack
Power Supply: 9VDC BOSS style center pin negative 2.1mm (NOT INCLUDED)
Dimensions (cm): 14 x 10 x 5.6
Current Draw: 220mA

Notes: The Acapulco Gold is a dirt-simple distortion Device modeled after the sound of a cranked vintage Model T amplifier, bringing the openness, clarity, and crunch that only a dimed tube amp can provide, at a fraction of the size, and without expensive maintenance costs!

Since tone is in the hands, the controls of the Acapulco Gold are as simple as possible. The footswitch turns the pedal on and off, and the giant knob controls the output volume. That's it. The rest is at your fingertips. Want less gain? Turn down your guitar's volume knob. Need a darker rhythm tone? Roll back your guitar's tone control. Easy, right?

Big Knob: The big knob sets the output level, sometimes known as Volume. PLEASE BE CAREFUL, the Acapulco Gold is extremely loud!

With your guitar's volume all the way up, the Acapulco Gold roars like a wide-open Model T on the verge of explosion. At just-barely-backed-off, the Gold becomes a raunchy overdrive. At minimum guitar volume settings, the Acapulco Gold delivers a hazy, Nashville-sounding spank to your tone.

How about this? If your guitar has separate volume and tone controls for each pickup and a three-way selector switch, this little one-knob banger becomes a three-channel tone monster at the flick of your wrist!

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 18 mA