DJミキサー

Notes: Mid-range DJ mixer from the leading UK brand. Fully analogue four-channel design with A&H's much-loved Xone filter section. Very tempting alternative to the flagship Xone:96. Excellent value.

Supplier notes:
Created for DJs and electronic music purists, Xone:43 is a 4+1 channel DJ mixer that offers the very best of analogue audio quality, including the legendary Xone filter with resonance control, 3 band EQ, crossfader with three curve settings and X:FX for send/return to your favourite FX unit.

The crossfader has three switchable curve settings for blending or scratching styles and can be easily replaced or upgraded to a custom Innofader for ultimate crossfader performance.

With balanced XLR main outputs, independent booth and record outputs, Xone:43 excels in the club and in high end personal DJ setups.

Notes: Simple and straight to the point, ARS's five-band EQ allows you to tweak and adjust the balance of frequencies to get the most from your system. Pristine audiophile sound quality.

Supplier's Notes:
The MODEL-5000 5 Band Equalizer is designed to adjust to all genres of music, and various sound sources such as vinyl, CD and PC.

Source sounds remains lively, while 5 Band Equalizer allowing effective and precise equalization that is not possible with isolators.
Wide Q filter gives instantaneous adjustment.
ARS MODEL-5000 will become your essential item on the site.

* 5 bandwidth of frequencies, HI / HI MID / MID / MID LOW / LOW, are finely level-controlled.
* For the input sources, either RCA unbalanced jacks or XLR balanced jacks (2HOT) can be connected.
* For the output sources, both RCA unbalanced jacks and XLR balanced jacks can be connected simultaneously since both jacks has independent output circuits.
* Knobs have brims on the centre point to easily identified the centre with a little light in the clubs.
* 50 mm width intervals between knobs give smooth operation to improve DJ performance.
* No power switch avoiding accidentally turning power off while playing.
* Minimizing the power noise by designing the main circuit board and the power circuit board independently and setting them apart.

Specs

Frequency Response: +-1dB 20Hz-20Khz (With no EQ)
Input: RCA Unbalanced Impedance 20K Ohm/ XLR Balanced Impedance 40K Ohm
Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Maximum Output Level: +20 dB
Equalizer Control: 75Hz, 300Hz, 1Khz, 3Khz, 10Khz, 5 Bands
Adjustable Range: i12dB
EQ In/Out Switch: Selector switch on the right side of the front panel.
Power Requirement: US-115V/EU-230V(Selectable)
Power Consumption: 10w
Dimensions: Front Panel 1U (W)482 x (H)44 x (D)195 mm
Front Panel Colour: Black

Notes: Designed for Algoriddim djay PRO AI and fully compatible with the Neural Mix functions for real-time stem mixing, the RMX-95 is a next-generation digital DJ mixer with built-in dual 24-bit interface.

Supplier's Notes:
Standard redefined

The professional RMX-95 4+1 channel club mixer blurs the lines between analogue workflow and digital technology. The RMX-95 is a cutting-edge, extraordinarily versatile creative tool thanks to its dual-USB 2.0 interface, redesigned effects section, optional MIDI mapping of all controls and smooth integration of the djay PRO AI DJ software. The club mixer has a familiar and user-friendly interface, making it suitable for both professional and hobby DJs.

Connections galore

The RMX-95 also excels in terms of connectivity: Four CD, two line, and two phono inputs are available on the four input channels. The separate microphone channel has two microphone connections (1 x jack, 1 x jack/XLR combination jack) and an additional AUX input. The master output offers RCA or balanced XLR cable connections. The booth output has two jack connections for stereo operation. However, it can also be used in mono mode. A recording device can be connected to the Rec output via RCA jacks to record DJ sets - regardless of the master output level. Last but not least, the DJ mixer has two jacks for headphones.

Maximum flexibility:

Dual-USB audio interface

Superior 24-bit sound quality is provided by the ten inputs and outputs of the high-quality dual-USB 2.0 interface. The two USB ports allow smooth transitions between DJs and maximum flexibility when using different setups in a single club night. In addition, the active USB hub enables the connection of additional USB devices.

Fully digital architecture

The RMX-95's digital architecture transforms the DJ mixer into an individually mappable MIDI controller. As part of this, the setup menu provides a wealth of customisable options, such as EQ frequency range, Neural Mix™ EQ mode, audio interface routing, and zone routing for the booth output.

DVS-enabled for djay Pro AI & Neural Mix

The RMX-95 works with Algoriddim djay PRO AI via plug and play. The DJ app's ground-breaking Neural Mix function lets you isolate beats, melodies, and vocals in the mix in real time. The RMX-95 supports djay PRO AI's advanced DVS integration with Mac, PC, iPhone and iPad. The DJ software is also compatible with streaming services like Tidalj, Soundcloudj, Beatport Linkj or Beatsource Linkj.

Crisp cuts and smooth blending
The adjustable curve of all faders provides DJs with the creative flexibility they want while mixing. Turntablists and scratch wizzards can also upgrade the crossfader with the contactless RMX innoFADER.

Indestructible design
The club mixer's sleek black metal surface is not only eye-catching but also highly durable. The solid metal housing and hard-wearing metal shafts in all of the built-in potentiometers and switches provide a long service life, even with heavy club use.

RMX-95

High performance DJ Club Mixer with premium sound
24-bit dual 10 In/Out USB audio interface and USB hub
Beat FX & sound filters with frequency and resonance control

Technical data

Frequency Range: 20 Hz - 20 kHz +2/-3dB
Inputs: 7x line RCA, 2x phono RCA, 1x mic combo-XLR/jack, 1x mic 6.3mm jack (TR), 2x USB port
Outputs: master XLR (balanced), master RCA (unbalanced), booth (TRS) (balanced), rec RCA (unbalanced), 1x headphones 6.3mm jack, 1x headphones 3.5mm jack
EQ range classic at 70 Hz, 1 kHz, 13 kHz: -26 dB/+9 dB
-EQ range isolator at 70 Hz, 1 kHz, 13 kHz: -90 dB (total kill)/+9 dB
EQ range mic at 100 Hz, 10 kHz: -12 dB/+ 12dB
EQ headphones at 100 Hz, 10 kHz: -29dB
Power Source: AC100-240V, 50/60Hz
Power Consumption: 29 W
Dimensions: 322(W) x 387(D) x 107.5(H) mm

Notes: Exceptionally versatile four-channel rotary mixer at a very reasonable price. Twelve inputs, three-band EQ, assignable multi-mode filter, isolator and assignable crossfader. Ultra flexible.

Supplier's Notes:
Omnitronic TRM-422: the rotary mixer on a new level

The desired child- Omnitronic's popular TRM series has been expanded: the TRM-422 combines all the proven features of the previous models, but additionally offers functions that numerous fans had wished for. During the development of the mixer, the focus was on the demands and suggestions of the community.

Full control- Each of the 4 input channels has 2 line inputs, one of which can become a phono input at the touch of a button. The channels are each equipped with a volume as well as a gain control. In addition to the master isolator (bass, mid & high), the DJ has the option to activate a filter with HPF, BPF, LPF, resonance and sweep controls in each of the 4 input channels.

The master output is available to the DJ in both XLR and RCA versions.

Effect ways- The use of external effect devices is possible through an FX-In and FX-Out via 6.3 mm jack. The mixer's master insert is also equipped with a send & return (unbalanced) path. This allows additional external effects to be looped into the mixer.

DVS integration- The mixer's timecode outputs allow easy integration of a DVS system (Digital Vinyl System) such as Traktor or Serato.

Monitor section- The booth output of the TRM-422 is provided with one XLR and one RCA connector. The signal of the booth output can be easily adjusted to the conditions in the DJ booth with the help of an EQ (High & Low).

Microphone inputs- The TRM-422 offers 2 microphone inputs. The first mic input gives the DJ the ability to modify the mic signal with EQ (high & low).

Backup source- With the help of the AUX input on the front panel, players such as smartphones, tablets or MP3 players can easily be connected via mini-jack (3.5 mm) and thus serve as a backup solution.

Activatable crossfader- If you don't want to do without a crossfader during your DJ set, you have the option to assign each of the 4 channels to the integrated crossfader. If the crossfader is not used, it can easily be switched off.

Set recording- The RCA record-out makes it easy to record your own DJ set.

Technical specifications

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 24 W
Protection class: Class I
Power connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Frequency range: Microphone 20 - 20000 Hz, Line 20 - 20000 Hz, Phono 40 - 18000 Hz
S/N ratio: >97,2 dB line, >91,7 dB Microphone
THD: Line <0,04 % at 1 kHz, Phono <0,13 % at 1 kHz, Microphone <0,008 % at 1 kHz
Gain: Microphone 44 dB, Line -16,5 dB to +8,5 dB Phono -48,5 dB to +23,5 dB
Isolators: Master Gain:- ? bis +9, Low/mid 300 Hz, 18db/oct , Butterworth, Mid/high 4000 Hz, 18db/oct , Butterworth
Crosstalk: >-68 dB
Control elements: Power switch, source selector, Crossfader, Crossfader selector switch, Crossfade curve switch; Cue mix split function, EQ controls

Connections
Input: 4 x line via stereo RCA
Input: 4 x line/phono via stereo RCA
Input: 2 x Microphone via 3-pin XLR
Output: 1 x headphones via 6.3 mm jack socket (stereo) mounting version
Output: 1 x headphones via 3.5 mm jack (stereo) mounting version
Output: 1 x rec. via stereo RCA
Output: 2 x booth via 3-pin XLR
Output: 1 x booth via stereo RCA
Output: 2 x master via 3-pin XLR
Output: 1 x master via stereo RCA
Output: 1 x AUX sends via 6.3 mm jack socket (stereo) mounting version
Output: 1 x AUX returns via 6.3 mm jack socket (stereo) mounting version

Channels:
Input chanel: 4 x stereo with Line-Line/Phono switch via RCA, channel control via Rotary, 3-band tone control EQ, source selector, gain control, CUE switch, FX routing switch, Crossfader selector switch,
Microphon chanal: 2 x mono via XLR, channel control via Rotary dial, ON AIR switch

Master output: 2 x stereo via XLR, channel control via Rotary
Booth output: 2 x stereo via XLR, channel control via Rotary
Rec. output: 1 x stereo via RCA
Headphones output: 1 x stereo via Plug 6,3mm/3,5mm (Jack), channel control via Rotary dial, Cue mix split function,
Max. level: Output: +18 dBu
Material: Metal
Housing design: Desktop console housing
Dimensions: Width: 41 cm, Depth: 28,5 cm, Height: 10,5 cm
Weight: 5,74 kg