DJ Mixer Replacement Parts

Notes: Compatible with the Innofader Pro2, Innofader PNP3, and mini Innofader Plus, the InnoJuster is a smart little module which allows you to adjust cut-in, curve and calibration of your Innofader with it installed in your mixer or controller.

Supplier's notes:
The Innojuster is back by popular demand! The new Innojuster has all of the parts needed to work with the current models Innofader Pro2, Innofader PNP3, and mini Innofader Plus.

The Innojuster allows you to do all of the adjustments, calibrations, and presets with your Innofader fully installed. You may find this especially helpful if you frequently do fine tuning and want the flexibility to do this without opening your mixer or controller each time. Includes the following controls:

1) Cut-in: Allows adjustment of the dead space on each side of the crossfader.
2) Curve: Allows a full range of curve adjustments from bottom to top cut and everything in-between.
3) Fwd/Rev switch: Switches between normal and hamster style fader operation
4) Calibration: Allows recalibration of the Innofader on-the-spot and access to all of the fader presets.

**Note on the mini Innofader Plus the Cut-In and Curve dials adjust left and right cut points independently.

On the Innofader PNP3 and Innofader Pro2, you have the flexibility of using the standard dial functions or separate left/right cut point adjustments.

Notes: The innoFADER PNP3 now offers you the best precision full bodied fader feel with some nice improvements to make your installation go much more smoothly. Utilising the same capacitance technology innoFADER is famous for to ensure maximum reliability and longevity.

The innoFADER PNP3 has an added feature which allows you to sharpen the cut point itself without the need to adjust the curve dial. This way you can optimize the Innofader PNP3 for both scratching and mixing.

Depth reduced from 45mm to 38mm
Durable, easy access Curve and Cut dials
No polarity testing required - plug in and go!
Fits Pioneer S series mixers (S3, S7, S9, S11)*1
Upgrade for Pioneer DDJ-1000 and DDJ-Rev7*1
LED shows cutting action and presents
Spare stem included

Notes: DJ Tech Tools have taken their Chroma Caps and made them shiny and gold.

Super-shiny reflective coating makes these their wildest caps yet.

Durable metal-like exterior coating.

They look great with lighting at indoor gigs and gleam brightly in the sun at outdoor DJ seshes.

Completely Redesigned, More Playable Knobs

Every last detail was upgraded in the redesign to increase playability, including: rounded corners and bright colours with large clear markers for better visibility, and increased widths for a more natural grip.

Knobs You Can See In a Club

Don't kill the dancefloor cause you can't tell the gain from the EQ knob. Chroma Caps come in a wide range of bright colours and materials that makes controls stand out. No more needless mistakes.

Label Functions By Colour

Label functions by colour for more playable gear. It's 10X easier to tell an EQ from a filter when everything is labelled by colour or material. This means you can focus on the music, not the lighting, while adding a personal touch to your beloved gear.

Technical Details

Sizes:

Note: Diagram shows knobs viewed from below

Encoder knob base diameter: 18.5mm x 15.4 mm tall
Faders: 22mm long x 12mm wide x 14.25mm tall
Faders MK2: 22mm long x 12mm wide x 14.25mm tall (improved fit for P-Lock Pioneer faders)
Fatty knob base diameter: 18.5mm x 16 mm tall
Super knob base diameter: 14.2 mm x 19.6 mm tall
Thin Encoders: base diameter: 14.2 mm x 19.6 mm tall
Knobs fit on 6.5mm D shaft pots, check the diagram above to select the right variant for your gear.

Ease of Install:

Chroma caps are very easy to install and require no expertise or hardware. To remove your old knobs use a small plastic object to lever them off without bending the shaft. Avoid metal objects since they might damage the finish on your device.

People commonly use Chroma caps as: DJ knobs, Mixer knobs, on DJ mixers, as replacement knobs, as Pioneer knobs, as EQ knobs, and as Potentiometer knobs. Chroma caps are great DJ Accessories

Warranty:
Every cap is guaranteed against defect and will be replaced immediately and without any cost to the customer within the first year.

Notes: DJ Tech Tools have taken their Chroma Caps and made them shiny and gold.

Super-shiny reflective coating makes these their wildest caps yet.

Durable metal-like exterior coating.

They look great with lighting at indoor gigs and gleam brightly in the sun at outdoor DJ seshes.

Completely Redesigned, More Playable Knobs

Every last detail was upgraded in the redesign to increase playability, including: rounded corners and bright colors with large clear markers for better visibility, and increased widths for a more natural grip.

Knobs You Can See In a Club

Don't kill the dancefloor cause you can't tell the gain from the EQ knob. Chroma Caps come in a wide range of bright colors and materials that makes controls stand out. No more needless mistakes.

Label Functions By Colour

Label functions by color for more playable gear. It's 10X easier to tell an EQ from a filter when everything is labeled by color or material. This means you can focus on the music, not the lighting, while adding a personal touch to your beloved gear.

Technical Details

Sizes:

Note: Diagram shows knobs viewed from below

Encoder knob base diameter: 18.5mm x 15.4 mm tall
Faders: 22mm long x 12mm wide x 14.25mm tall
Faders MK2: 22mm long x 12mm wide x 14.25mm tall (improved fit for P-Lock Pioneer faders)
Fatty knob base diameter: 18.5mm x 16 mm tall
Super knob base diameter: 14.2 mm x 19.6 mm tall
Thin Encoders: base diameter: 14.2 mm x 19.6 mm tall
Knobs fit on 6.5mm D shaft pots, check the diagram above to select the right variant for your gear.

Ease of Install:

Chroma caps are very easy to install and require no expertise or hardware. To remove your old knobs use a small plastic object to lever them off without bending the shaft. Avoid metal objects since they might damage the finish on your device.

People commonly use Chroma caps as: DJ knobs, Mixer knobs, on DJ mixers, as replacement knobs, as Pioneer knobs, as EQ knobs, and as Potentiometer knobs. Chroma caps are great DJ Accessories.

Warranty:

Every cap is guaranteed against defect and will be replaced immediately and without any cost to the customer within the first year.

Notes: Rack mount kit

Built for Allen & Heath XONE 92

Finish: Black

Optional Accessory

Notes: The new mini innoFADER PRO can turn any ordinary mixer or controller into a true scratch machine for minimal cost. This model is for the Reloop Spin and comes setup to just drop in and go.

The mini innoFADER PRO offers unparalleled precision and adjustability. It can respond to DJ movements in less than a millisecond. And now the fader itself can be adjusted by controls on the front panel using the additional innoJUSTER style controls. DJs can get the dead space down to 0.1mm for super tight and fast cuts, or go to 1mm or so for clean beat juggling. The mini Innofader Pro comes standard with either light tension for scratching.

Notes: The new mini innoFADER PRO can turn any ordinary mixer or controller into a true scratch machine for minimal cost. It works as an upgrade for mixers and controllers that already contain the mini innoFADER.

The mini innoFADER PRO offers unparalleled precision and adjustability. It can respond to DJ movements in less than a millisecond. And now the fader itself can be adjusted by controls on the front panel using the additional innoJUSTER style controls. DJ's can get the dead space down to 0.1mm for super tight and fast cuts, or go to 1mm or so for clean beat juggling. The mini Innofader Pro comes standard with either light tension for scratching.

Notes: The Innofader Pro2 is the ultimate replacement audio fader. It gives you an ultra precise i 0.05mm cut-in accuracy for even tighter control of your scratches. Separate left and right cut controls make it easy to adjust without the need to recalibrate. And for the perfectionist in you, it even has super precise presets which allow you to do things like shift the cut point by a mere 0.04mm, less than even the thickness of your hair.

Thanks to the feedback of customers like yourself, the Pro2 now fits more mixers than ever, all without modification. The adapter boards are already insulated and marked clearly to show you the specific one you need for your mixer.

To take advantage of all of the Innofader Pro2 adjustability, we recommend you purchase an Innojuster. This allows you to access Innofader Pro2 control dials plus the calibration button from outside the mixer.

Notes: Replacement front panel for the Allen & Heath XONE:92 DJ mixer.

Notes: The Allen & Heath cross fader is the official replacement part from Allen & Heath, which fits the cross fader of the Xone:22 model.