安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

DI boxes

ホーム  Equipment  

DI boxes

Options
15/5(ページ1/1)の商品
Subscribe to our weekly Studio Equipment emails
ART Z Direct Professional Passive DI Box
Cat: 455715 Rel: 11 May 12
 
Passive interface lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru an audio isolation transformer
Notes: The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4" input is converted by the transformer into an isolated balanced low impedance signal source. The Zdirect's audio transformer has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Zdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input attenuator switches allow for a wide range of signal levels and the input thru jack allows for tapping off of your signal chain. The ground lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate 2 systems, thereby reducing hum and ground-loop noise.

What further sets the Zdirect apart from other DI boxes are its extended features and versatility. ART have added a switchable low pass filter that cuts out all very high frequency interference. This Bessel filter on the output is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filter is also very effective in reducing any digital computer noise artifacts when using the Zdirect as an interface between a computer-based audio workstation and your monitors. The phase invert switch, while not normally included with your run of the mill DI box, has been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.

The compact black anodized all aluminum case and it's passive design allow the Zdirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, DJ, and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the Zdirect the obvious choice.
Read more
 1 in stock $34.00
Behringer DI100 Ultra DI Professional Battery/Phantom Powered DI Box
Cat: 493501 Rel: 14 Jun 13
 
Active DI box powered by batter or phantom power
Notes: With the DI100, you can rest assured that your sound source will reach the console balanced and noise free. Behringer's take on the all important active DI box gives you functionality, durability and incredible sound at a remarkable price.

Plug into the DI100's balanced 1/4" TRS or XLR input, then send a signal to your console via the balanced XLR output. You can even plug your guitar or bass amp's speaker output into the DI100, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. It also features a 1/4" link jack to send your signal to an on stage amplifier.

The DI100 also has a switchable attenuation pad, allowing input levels of up to +50dB. There is also a ground lift switch to eliminate noise associated with ground loops. The DI100 also features Behringer's renowned OT-1 output transformer.
Read more
 More than 10 in stock $27.88
Behringer DI20 Ultra DI Box & Splitter
Cat: 486279 Rel: 04 Apr 13
 
Active 2 channel DI box & splitter
 More than 10 in stock $21.75
Behringer GI100 Ultra G Professional Battery/Phantom Powered DI Box with Guitar Speaker Emulation
Cat: 493502 Rel: 14 Jun 13
 
Battery/phantom powered DI box with guitar cabinet emulation
Notes: Whether you're recording or on stage, you need a great DI (direct injection) box to get your guitar sound to the console with full dynamics and power. The Ultra G GI100 active DI box gives you all the full rock glory of a cranked 4x12 cabinet at a fraction of the weight and floor space.

The Behringer GI100 works like a standard DI box. You can use it to tap into your amplifier's speaker outputs, even high powered rigs with ratings of up to 3,000 Watts. Or, just plug your guitar directly into the GI100, switch on the realistic 4x12 cabinet simulation designed by renowned engineer Juergen Rath, and you've got rock royalty sized tone in a package the size of a cheeseburger! You may never mic your speakers again!

The DI100 sounds amazing, and it comes equipped to meet the most common needs of gigging and recording, as well as the travel in between. There's a ground lift switch that eliminates typical ground loop problems, and when phantom power is connected, this DI box automatically shuts off the internal battery. The DI100 is housed in cool looking red aluminum and features stackable, oversized rubber corners.

The DI100 goes way beyond the typical abilities of a DI box to give you the sound and performance you'd expect from a super charged vintage half stack, plus enough power to have your audience wondering where you hid the amp. Introduce your axe to the guitar loving DI100.
Read more
$28.72 SAVE 10%
 More than 10 in stock $25.85
Klark Teknik Pro 10A Active Direct DI Box
Cat: 697791 Rel: 29 Aug 18
 
Active DI box with MIDAS transformer, extended dynamic range and phantom/battery operation
Notes: Building on KLARK TEKNIK's storied legacy of highest-quality direct injection devices, the DI 10A PRO DI ACTIVE offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 10A is ideal for interfacing keyboards, samplers and other electronic musical instruments to mixing consoles, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. The DI 10A is powered by +48 V phantom power with a 9 V battery backup, which automatically allows the device to function should phantom power fail, or be unavailable. Equipped with a switchable input attenuator, DI 10A easily accommodates instruments, line, and even loudspeaker level signals - and thanks to its extremely low noise input circuit topology (-112 dBu), DI 10A provides extended dynamic range, making it the perfect choice for professional audio and multimedia applications.

Compact & Rugged Construction:

The ultra-compact DI 10A is built to handle the rigours of life on the road via a thick and rugged aluminium extrusion that protects the electronics. The enclosure's roadworthiness is further enhanced through the implementation of sturdy rubber corner bumpers.

MIDAS - The Legend in Sound Quality:

Ever since its formation in the 1970s, MIDAS has had a long history of innovation and leadership in the world of audio mixing consoles. Employed by the most famous touring acts and installations world-wide, legendary MIDAS consoles such as the XL4 and Heritage H3000 quickly became industry standards.

MIDAS has earned their impeccable reputation due to their no-compromise approach for audio and build quality and in particular for their Award-winning products which are considered by industry experts as the industry's best sounding designs. Building on this legacy, the XL8 and PRO Series of Live Mixing Systems continue this great heritage of Award-winning audio quality.

KLARK TEKNIK is proud to incorporate MIDAS designed transformers for the ultimate in high-quality audio reproduction in both live and studio environments. Find out more about MIDAS' amazing legacy by visiting their extensive website.

High Headroom Design:

A custom instrumentation-grade input circuit was designed for the DI 10A using advanced analogue design techniques to create the very high input impedance required by passive guitar and bass pickups, whilst keeping the actual component values low to minimise noise. This innovative approach to circuit design produces a very low noise floor, which combined with the high clipping point creates an unrivalled dynamic range in a +48 V phantom powered DI Box.

Connectivity & More:

DI 10A PRO DI ACTIVE features genuine high quality Neutrik XLR and high impedance 1/4" TS connectors to maintain the highest signal integrity. The Input connectors accept balanced and unbalanced signals over TRS, TS or XLR cables with plugs, with the Thru jack passing an unbalanced 1/4" TS signal to local amps/monitors. The Output XLR jack sends a balanced version of the Input signal to your mixing board or other processing device.
Read more
$44.61 SAVE 10%
 More than 10 in stock $40.14
Click for better price!
or call +44 20 7424 1960
quote 697791
15/5(ページ1/1)の商品

Filter

DI boxes
DJ機器
Release Date
Featured
Close