Audio Patchbays | Digital Audio Patchbays

Notes: INTRFX facilitates effects processing between eurorack, guitar pedals and electronic instruments.

Version 2 has been upgraded with high-quality 3.5 mm jacks, slide switches, premium finish, and is completely lead-free. Audio level conversion is now +/-12 dB for use with more sensitive pedals (previously +/-9 dB).

Want to connect outboard gear to your eurorack synthesizer without taking up valuable HP in your case? INTRFX allows eurorack-level signals to be processed with pedals and/or outboard effects, and also allows line-level instruments to be processed with eurorack modules. Each of its three channels has an Interchange Switch to swap this mode, as well as an FX Blend parameter which can be controlled via CV. And because of its compact physical design, the INTRFX can be placed almost anywhere and connected to eurorack systems with 3.5 mm patch cables rather than bulkier 1/4-inch cables.

Feedback effects can be achieved by switching into the "wrong" mode, sending the FX return back into the FX send, while still allowing for dry signal blend and modulation. Channels can also be patched into one another and toggled between modes for experimental routing. Conveniently, each channel can operate as a reversed linear VCA for both audio and DC signals when no effects are used.

Whether you're patching eurorack through classic guitar pedals or running a drum machine through your gnarliest modules, INTRFX makes these connections easy and flexible.

Technical Specs:
6 x 1/4-inch line-level jacks
6 x 3.5 mm euro-level jacks
x 3.5 mm control voltage inputs (10 Vpp)
Power: 9 VDC, 75 mA, 2.1 mm (negative center)
Dimensions: 3.75 in x 3.75 in x 2.5 in
Weight: 11.5 oz (330 g)

Notes: Patchulator is the ultimate tool for quick experimental signal routing of guitar pedals, synths and more.

Version 2 has been upgraded with new high-quality 3.5 mm jacks, premium finish with fresh UV printed graphics, and is completely lead-free.

Is your pedalboard brain-dead? The Patchulator provides a tangle-free way to change the order of your effects to create new tones using little to no brainpower! With the provided mini cables, just patch signal from your guitar or bass into (and out of) each effect, then back out to your amp or mixer. Invent new and interesting sounds while your synapses are firing, simply by rearranging the sequence of effects! All your gear and cabling stays put. Oh, and any effect not patched is "truly" bypassed... Genius!

Are your cables giving you a brain tumor? In the world of electronic music, the Patchulator desktop patchbay becomes a powerful nerve center for your instruments, allowing you to share and swap effects all around your setup, without needing to solve a brainteaser. Just connect your keyboards, synthesizers, samplers, drum machines (or any sound source) to a few channels, then fill the other channels with your effects' ins and outs. Using the mini patch cables, you can then route any of the effects into and out of the signal path of any instrument, just like a real patch bay! Hmmm... what will you mastermind?

In the world of modular synthesizers, the Patchulator is the brainstem between your modules and outboard gear, since it uses both standard and mini phono plugs. So if your brain tissue needs some electro-stimulation, simply inject control voltages and audio signals directly from your modular into effects units and chains. Better yet, use two Patchulators and seriously expand your cranial capacity! Whatever it is that you can brainstorm - guitar pedals and studio effects, synths and samplers, grooveboxes and drum machines, modulars and modulation signals, mixers and recording interfaces - the Patchulator allows it all to interconnect.

Technical Specs:

16 x 1/4-in TRS jacks
16 x 3.5 mm TRS jacks
8 x 6-in TRS patch cables (3.5 mm)
Power: None (passive)
Dimensions: 5.25 in x 5.25 in x 1.5 in
Weight: 16.5 oz (465 g)

Notes: Terminal adds routing flexibility to signal chains of guitar pedal effects, electronic instruments and other audio devices.

Version 2 has been upgraded with high-quality 1/4-inch jacks, premium finish with UV printed graphics, and is completely lead-free.

Are you playing with your cables more than your pedals? Terminal adds new routing possibilities to a more permanent setup. Its half-normalled configuration, which is also used in recording studio patch bays, allows an audio signal to pass "normally" and to be copied from the Green SND jack without interruption. However, the signal can also be cut off or replaced by patching into the RTN jack. It's easy to insert effects and re-route instruments without pulling your rig apart.

This simple but very useful design was originally a custom project for musician Tycho, who is using Terminal in his studio and live rigs to quickly patch between sections of pedal and instrument chains. Community interest in the product led Boredbrain to produce Terminal in limited batches, and then due to its popularity, it has now become a mainstay.

Technical Specs:

16 x 1/4-inch TRS jacks
Power: None (passive)
Dimensions: 4.5 in x 2.75 in x 2.5 in
Weight: 10.5 oz (300 g)