安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

ホーム  Coming Soon  

Studio Equipment

Options
150/345(ページ1/7)の商品
1  2  3  4  5  6  7  »
FORTHCOMING
Soma Laboratory Pulsar-23 Organismic Drum Machine (black)
Cat: 781129 Rel: 31 Dec 20
 
analog synthesiser/drum machine
Notes: Pulsar-23 is a multi-functional analog synthesizer and generator of complex rhythmic patterns.

The Pulsar consists of 23 different modules, including four flexible sound generators with completely different structures, four envelope generators, four looper-recorders, a clock generator with dividers, a controlled chaos generator, an LFO, a two-channel CV-controlled effects processor, distortion, two controlled amplifiers, an inverter, a controlled inverter and two controlled analog switches. In addition to these 23 main units, the Pulsar also contains 13 auxiliary units, such as a four-channel MIDI to CV converter, a noise generator, four attenuators, two dynamic CV generators with sensory control, two impulse converters and single passive electronic components for live circuit bending.

Pulsar-23 can be used for the synthesis of percussion instruments and rhythms, bass and melodic lines, effects and sound landscapes, as well as a source of control voltage. The Pulsar functions in three different modes: stand-alone, MIDI control and CV control. Moreover, all the above features and control modes can work simultaneously in any proportion or combination. Additionally, Pulsar offers live circuit bending capabilities and the use of the artist's body conductivity to create patches and cross modulations.

Pulsar continues the line of organismic synthesizers begun by LYRA-8, but now in the area of percussion instruments.

Also, it has MIDI control and synchronization and a lot of smaller modules such as 4 assignable attenuators and 2 dynamic CV sensors for CV generation etc. In general, there are 55 knobs, 11 switches and over 100 inputs and outputs for patching, Eurorack integration, external mixing and processing, live circuit bending!

It comes in a special HQ bag with 30 alligator clips cables and PSU.
Read more
MRP:$2,066.56 SAVE 17%
coming soon $1,722.13
FORTHCOMING
LEP Leploop Sequencer & Drum Machine Analogue Synthesiser
LEP Leploop Sequencer & Drum Machine Analogue Synthesiser (sequencer & drum machine synthesiser)
Cat: 770286
 
analogue synthesiser
Notes: Laboratorio Elettronico Popolare (L. E. P. ) is proud to present to you a one-of-a kind analog synthesizer, sequencer and drum-machine: LEPLOOP.

Small in nature but aggressive in sound, the user will be able to create a variety of analog timbres and beats.

LEPLOOP was designed to be a minimalist electronic music live-performance groove-box, which can be used to create a variety of electronic musical styles.

The LEPLOOP can be synched via MIDI to another LEPLOOP for tempo-synched operation or to another MIDI device or sequencer to receive sequence stop & start instructions.

1 oscillator (VCO1) triangular/square wave
1 oscillator (VCO2) sawtooth wave with ring modulator and FM modulation
White noise generator
24 dB/OCT Low pass filter
Kick drum with distorsion and trigger mixer
2 VCA's
2 AR Envelope generators
1 LFO
16 Capacitors analo sequencer PWM programmable
4 Track digital rhythm sequencer 64 step each track
4 Channel audio mixer
Midi input(clock and notes)
5 CV out: S\H, SEQ, LFO, ENV1, ENV2
3 gate out: S\H, SEQ, CASSA
3 CV in: VCO1, VCO2, VCF cutoff
1 audio in (VCF)
4 audio out: MIXER, CASSA, VCO2, VCO mix
1 clock output: clock 24, MIDI start/stop
EEPROM memory 16 banks 10 pattern each
Read more
coming soon TBA
FORTHCOMING
Noise Engineering Desmodus Versio Stereo I/O Tail-generator Reverb & User-flashable DSP Platform Module
Notes: Desmodus Versio is Noise Engineering's take on a synthetic-tail generator reverb. In only 10hp, it features true stereo in and out, seven CV-controlled parameters, and three reverb modes. Desmodus Versio's feedback control sets the length of reverberation, from short echoes through infinite regenerations.

At its max, the reverb ducks when it receives input, useful for creating sidechain ducking and atmospheres for percussion. The different reverb modes offer even more sound options with clean, distorted, and pitch-shifting shimmer settings. The FSU button acts as a freeze and also creates some noise to stimulate the reverb when there is no external input.

Desmodus Versio isn't just a reverb, though: it's a DSP platform. Its firmware can be changed via USB, so users can load future firmwares onto it or develop their own with upcoming open-source support.

With Desmodus Versio, Noise Engineering continues their tradition of supporting conservation:a portion of proceeds from every Desmodus Versio sold goes to Bat Conservation International. Find out why bats are not only cool but also an important part of our ecosystem at Bat Conservation International's website, batcon.org.
Read more
MRP:$406.85 SAVE 17%
coming soon $339.03
FORTHCOMING
Black Corporation Deckard's Dream Mk2 Eight Voice Polyphonic Analogue Desktop Synthesiser
Notes: Deckard's Dream MkII is an eight-voice polyphonic analog synthesizer in desktop format. It is inspired by a certain cinematic sound from the late 1970s and early 1980s.

The synth features a fully analog signal path with two independent layers per voice. Discrete waveshapers help to reproduce the oddities of the original waveforms, especially the sawtooth glitch, which is a big part of the CS-80 sound. An autotune function assures that all 16 VCOs are tracking perfectly. It even offers detune and microtuning settings for a more vintage feel. With the addition of MIDI implementation, 256 presets (which can be managed on the integrated OLED display) and an upcoming software editor provided by Spektro Audio, this vintage inspired poly synth is at home in any modern studio.

For each layer, the synth offers a VCO with square, saw and sine waveforms, discrete 12 dB HP and LP filters with separate resonance controls, an ADSR for the filter with adjustable initial and attack levels, and an ADSR dedicated to the VCA. The synth also provides velocity and aftertouch controls for filter brilliance and volume levels.

Furthermore, polyphonic aftertouch gives Deckard's Dream expression that has only been possible on a very small number of synthesizers. MPE technology (using controllers by ROLI, LinnStrument, Haken) takes this even further with the addition of polyphonic pitch bend.
The Deckard's Dream MkII delivers everything the previous version did, in a new thin and light tabletop format with woodsides or rack-ears (both included). It also brings additional controls over Sustain modes and timing.

The synth is build in Japan, Tokyo, using only high quality electronic components.
Read more
MRP:$5,875.49 SAVE 17%
coming soon $4,896.24
FORTHCOMING
Malekko Varigate 4+ Module (black faceplate)
Cat: 766093 Rel: 31 Dec 20
 
sequencer module
Notes: The Varigate 4+ is a 4-channel, 8-step sequencer that includes most features of the original Varigate 4, PLUS the new option to output both CV (quantized or unquantized) and gates simultaneously. Other new features include a Play/Stop function, Preset Banks (4×4), Glide Per Step, Scales and can also be configured as master for the Malekko Voltage Block as well as a slave to the Varigate 8+ if you're looking to expand your total channels and presets (up to 14 channels and 100 presets with V8+).

Each Channel (or Track) correlates with it's own sequencer (so 4 independent sequencers). The addition of the Gate/CV Switch allows for switching between 4 channels of CV, 2/2 for 2 channels of CV and 2 channels of gates, or all 4 channels to output only gates. Additionally, each step of a sequencer can be programmed with Probability for gates, Repeats, Glide and Notes (when in a CV mode). There is a also a Randomization feature for Repeats, Notes and Glide. Channel parameters for Scales, Sequence Direction (Forward, Reverse, Pendulum and Random), Sequence Length, Division, Multiplication and Pulsewidth are all easily accessible using Track Mode.

Easy Preset Recall makes the Varigate 4+ perfect for live performance. Pair it with the Malekko Voltage Block for maximum control.
Read more
MRP:$329.36 SAVE 17%
coming soon $274.47
FORTHCOMING
Behringer 960 Sequential Controller
Cat: 781518
 
Controller module
Notes: An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard EURORACK case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 960 SEQUENCER CONTROLLER is an 8-step sequencer with 3 rows of CV controls for adjusting the pitch of a signal at that stage. An additional 9th step can be used to stop the sequence. Plug in a Behringer 962 SEQUENTIAL SWITCH and transform the 960 from an 8-step sequencer into a 24-step giant capable of creating more intricate sequences and beats.

More sequence variations can be achieved by switching any of the desired Stage Mode switches to Normal, which lets the current stage proceed to the next one; Skip, which lets you bypass the stage; or Stop, to freeze the sequence. You can even manually trigger each stage by pressing the respective Set button. Create an 8-step sequence then set the 960 to skip every other stage to have a staccato rhythm and spice up a song.

The 960 also comes with an oscillator where you can adjust the oscillator range or pitch with the Frequency Range knob and fine tune that with the Frequency Vernier knob. You can also manually start or stop the oscillator with the on and off buttons or connect an external gate signal to control the on/off status. A control input is available for you to connect another module to tweak the oscillator frequency of the 960 and expand its flexibility.

Installing the 960 SEQUENCER CONTROLLER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 960 SEQUENCER CONTROLLER to be mixed with other synth modules for a truly unique set up.

100 mA +12V
50 mA -12V
0 mA 5V
47 mm deep
O 5.00

Inputs:
Oscillator on/off
Type
2 x 3.5 mm TS jacks, AC coupled

Impedance: >3 kO, unbalanced

Maximum input level : +5 V

Minimum switching threshold:
Control input
Type: 3.5 mm TS jack, 1 V/oct

Impedance: 100 kO, unbalanced

Maximum input level : i2 V, vernier set to 5

Shift input
Type: 3.5 mm TS jack, DC coupled

Impedance: 7 kO, unbalanced

Maximum input level : i5 V

Minimum switching threshold: +1.5 V

Stage triggers: Type
8 x 3.5 mm TS jacks, AC coupled

Impedance: >3 kO, unbalanced

Maximum input level : +5 V

Minimum switching threshold: +3.5 V trigger

Outputs
Row outputs
Type: 6 x 3.5 mm TS jacks, DC coupled

Impedance: 500 O, unbalanced

Maximum output level: +8 V (range X4)

Stage trigger outputs: Type
8 x 3.5 mm TS jacks, DC coupled

Impedance: 250 O, unbalanced

Maximum output level: +5 V, active high

Oscillator output
Type: 3.5 mm TS jack, DC coupled

Impedance: 4 kO, unbalanced

Maximum output level: +4 dBu

Duty cycle: 90%

Controls:
Frequency range:
1 (0.04 to 0.5 Hz), 2 (2.75 to 30 Hz)

3 (0.17 to 2 Hz), 4 (11 to 130 Hz)

5 (0.7 to 8 Hz), 6 (44 to 500 Hz)

Frequency vernier: Tune the oscillator range, 3 octave range

Oscillator on/off
Manually start or stop the oscillator

Voltage knobs
-8 to max voltage set by the range switch

Mode switch
Skip stage, play stage, stop sequencer

Set
Manually select stage

Range switches
X1 (+2 V), X2 (+4 V), X4 (+8 V) max. output

Timing on/off
Allows 3rd row knobs to control stage duration

Shift button
Manually skip to next stage

Power supply: Eurorack

Current draw: 100 mA (+12 V), 50 mA (-12 V)

Physical Dimensions: 284 x 129 x 47 mm (11.2 x 5.1 x 1.9")

Rack units: 56 HP

Weight: 0.64 kg (1.41 lbs)
Read more
coming soon $140.99
FORTHCOMING
Arturia Keystep 37 Portable USB MIDI Keyboard Controller & Sequencer
Cat: 790383 Rel: 31 Dec 20
 
USB MIDI keyboard controller & sequencer
Notes: KeyStep 37 goes beyond an easy-to-use 64-step sequencer, arpeggiator and MIDI keyboard. It's responsive, dynamic, expanded in every direction to encourage musical exploration - the controller that's built to help write music and also includes Ableton Live Lite, making it a complete music production starter kit, as well as appealing to veteran musicians. Like KeyStep and KeyStep Pro before it, KeyStep 37 offers unique features not found in any other product.

The familiar KeyStep formula, expanded. KeyStep 37 features a velocity-sensitive 37-note keybed, complete with aftertouch and RGB LED feedback, while remaining lightweight and compact.

At the center of the control panel, you'll find 4 new knobs with an LED screen, giving you instant access to inspiring new expressive tools and MIDI tweaking - total creative control.

The new controls unlock KeyStep 37's unique & enhanced Chord mode. Choose from 12 chord types, an array of strum effects, and spread the voices out into complex velocity-sensitive parts that respond like a stringed instrument.

Map out KeyStep 37's 3-octave keyboard range with a scale of your choice using Scale mode. Any key you play will automatically quantize to the nearest note in the chosen scale.

Tap into the inner workings of your MIDI hardware and software with assignable 16 MIDI CC pa-rameters across 4 switchable banks. Use the 4 new controls to tweak settings on the fly for dy-namic performances.

The core of your setup:

KeyStep 37 is designed to be put in control. An accessible interface, a compact design and com-prehensive connectivity make it the perfect centerpiece for your rig - whatever your needs.

Hook up your synth hardware with MIDI in/out. Control your favorite VST instruments with MIDI over USB. Use CV pitch, gate and mod connections for modular integration. Analog sync in/out keeps everything in time without hassle. The best bit? Use it all at the same time.

Included is a free copy of Ableton Live Lite, an accessible music-making suite for your Mac or PC. Register KeyStep 37 for your free download and get creative right out the box - let the music flow freely.
Read more
MRP:$192.45 SAVE 17%
coming soon $160.38
FORTHCOMING
Behringer 112 Dual VCO Module
Cat: 780465
 
analog dual VCO module
Notes: Eurorack module; two identical analog VCOs in one module.

Selectable waveforms: triangle, sawtooth and squarewave/pulse; adjustable pulsewidth and PWM CV input with attenuator; octave-switch and fine-tune control knob; hard and soft sync; 3 pitch CV inputs with attenuators;

Power consumption: 130mA (+12V) / 70mA (-12V); width: 16 HP; depth: 46mm
Read more
coming soon $107.63
FORTHCOMING
WMD SCLPL Stereo 5-Band Digital EQ & Morphing Filter Module
Notes: SCLPL (pronounced SCALPEL) is a Stereo 5-Band Digital EQ / Morphing Filter module for eurorack modular synthesizers. Use it to cut out problem frequencies on voices in your mix or to add pleasing enhancements to your stereo field.

Dual Mono and Stereo Control Schemes make it an excellent addition to any WMD Performance Mixer Setup. Add 4 SCLPL for 8 channels of EQ in 16HP. Put a 5th on the Master Bus and you have the ultimate eurorack mixing setup!

A simple user interface makes it a powerful tool for many use cases. It features 9 user-programmable preset slots that can then be "morphed" between seamlessly with CV or the Level knob in Morph Mode.

Each frequency band is set independently with the Level, Q, and Frequency knobs, and a helpful LED display aids in knowing exactly what's going on at all times.

Frequency bands include a Low Shelf, 3 Mid-Range Peaking Bands, and a High Shelf.
Read more
coming soon $244.32
FORTHCOMING
Arturia MicroFreak Vocoder Microphone
Cat: 789250 Rel: 30 Sep 20
 
Microphone for Arturia MicroFreak Vocoder
Notes: The perfect companion to MicroFreak's Vocoder engine. This specially designed microphone attachment lets you add your vocals to MicroFreak's unique mix of digital and analog.

Transform your toplines, harmonies, and spoken word into inspiring modulated textures.

With its gooseneck design, this electret microphone is built with ergonomics and ease of use in mind. Adjust its height and angle to suit your setup, and connect it directly to MicroFreak's head-phone connector. Thanks to an additional socket on the microphone's base, you can still connect your headphones for monitoring.

In terms of sound, the microphone is designed to work perfectly with the MicroFreak Vocoder engine's 16-band frequency range, ensuring accurate detection of the complex harmonics of the human voice. MicroFreak will detect when the mic is connected and automatically set the gain, but this can be easily adjusted in the utility menu.

Jump from subtle synthesized harmonies to robot vocals in no time with the MicroFreak Vocoder Microphone!
Read more
MRP:$32.29 SAVE 17%
coming soon $26.90
FORTHCOMING
Mordax Data Multifunction Tool Signal Analyser & Generator Module (black)
Notes: The Ultimate Eurorack Utility Module (and a whole lot more!)

The DATA is a digital platform for testing, measurement, and signal generation in Eurorack modular synthesis systems. It is a modular tool kit, with functions applicable to any system and style.

Use the DATA's scope to view the interactions between your control voltages and audio signals, allowing you to master your modules by understanding their voltage ranges, control shapes, and parameter responses. Use the DATA's dual waveform generator to dial in a precisely scaled LFO for CV control, or use the waveform's frequency "note mode" to effortlessly make dyads (two note chords). Use the DATA's clock program as a master clock or to divide or multiply an incoming clock signal, sending four different clock outs to gate modules directly or as control to sequencers.

The possibilities of the DATA are basically unlimited; with the included microSD you can update the DATA's firmware and we can continue to refine and create new programs.
Read more
MRP:$542.47 SAVE 21%
coming soon $429.46
FORTHCOMING
Modal Electronics ARGON8X 8 Voice 61 Key Polyphonic Wavetable Keyboard Synthesiser
Cat: 763203
 
wavetable keyboard synthesier
Notes: The Argon8X features an identical sound engine and feature set, but rather than a 37-note keybed, you get 61 keys for an even more immersive playing experience. Mind-bending functionality and near-infinite tonal possibilities meets an attractive price tag; Modal have once again raised the bar in the desktop synth category.
Read more
MRP:$838.25 SAVE 17%
coming soon $698.54
FORTHCOMING
Arturia MicroFreak Vocoder Limited Edition
Arturia MicroFreak Vocoder Limited Edition (synthesiser sequencer vocoder)
Cat: 789247 Rel: 30 Sep 20
 
Vocoder
Notes: The uniquely unpredictable MicroFreak but not as you know it. 14 digital oscillator modes, velvety analog filters and heaps of modulation/randomization controls, supercharged with wild vocoding abilities.

Arturia have created an entirely new 16-band mode to transform your voice in the Freakiest way possible. The vocoder engine features 3 waveforms - sawtooth, pulse width and noise - while the Timbre and Shape knobs adjust the response of the 16 frequency bands.

MicroFreak Vocoder Edition goes beyond robot vocals. 16 new presets give you instant access to android translations, crystalline harmonies and vibrant formant sequences galore. Connect an ex-ternal sound source like a drum machine or synth via the headphone socket for glitchy sound pro-cessing. Step up to the mic A simple, removable mic attachment that lets you sprinkle your voice into the mix. A gooseneck design means quick position adjustment, with easy connection straight into the headphone socket alongside your cans. The utility menu lets you set your preferred mic gain and noise gate settings. A new dress code First impressions make a difference. MicroFreak has always been out to make a statement, and the Vocoder Edition is no exception. The control panel has been given a makeover. The center strip boasts a bold new Swan graphic, while a sleek white finish makes this limited edition Freak stand out from the crowd - as if it didn't already. The Freak within Behind the revamped appearance and microphone attachment is the same lovable maniac that set the synth world spinning. Sparkling digital and wavetable oscillators collide with warm analog filters. A unique poly-after-touch PCB keyboard combines with a distinctly freaky arpeggiator & sequencer. Bathe your mix in sonic hysterics with the erratic mod matrix or the unique Spice & Dice randomizers.

Box contents:
MicroFreak Vocoder unit
Electret mic with gooseneck and headphone adapter
Power supply

Size & weight
Instrument size : 12.2 x 9.2 x 2.2 inches (311 x 233 x 55mm)
Instrument weight : 2.3 lbs. (1.02 Kg)

Read more
MRP:$386.19 SAVE 17%
coming soon $321.83
FORTHCOMING
Qu Bit Data Bender Circuit Bent Audio Buffer Module
Cat: 766026 Rel: 31 Dec 20
 
audio buffer module
Notes: Data Bender is a circuit bent digital audio buffer. It is inspired by the ways in which audio equipment can fail. The sounds of skipping CDs, software bugs, and defective tape machine playback are all accessible. The audio buffer can hold up to five minutes of stereo audio, providing a sonic canvas capable of infinite surprises and discovery.
Read more
MRP:$450.77 SAVE 17%
coming soon $375.64
FORTHCOMING
Doepfer A-174-4 3D Joystick Module
Cat: 765892
 
control voltage module
Notes: Module A-174-4 modules outputs three control voltages generated by a spring-loaded X/Y cross potentiometer (so-called joy stick) and a Gate signal. The control voltages for X and Y are controlled by the X and Y position of the joystick in the usual way. The third control voltage Z is controlled by the rotation of the spring-loaded joystick knob. The Gate signal is generated by a button at the center/top of the joystick knob.

For each control voltage the non-inverted signal (X, Y, Z) as well as the inverted signal with adjustable offset (-X+XO, -Y+YO, -Z+ZO) are available. The generic joystick control voltages are bipolar, i.e. they range from typ. -5V (lowest position) via 0V (center position) to typ. +5V (highest position). The "Overlap" switches can be used to add a fixed offset voltage of typ. +5V to the non-inverting output in question so that the output voltage range changes to typ. 0...+10V (rather than -5...+5V). That's necessary if e.g. a VCA has to be controlled, which requires a pure positive control voltage range. The switches are named "overlap" because they allow the overlapping of the non-inverting CV output (X, Y, Z) with the inverting output (-X+XO, -Y+YO, -Z+ZO) for crossfading applications. With the overlap switch "on" and appropriate setting of the offset control it's possible to obtain a control voltage range of 0...+10V for the non-inverting output and +10V...0V (i.e. same range but opposite direction) for the inverting output.

The offset voltages which are added to the inverting outputs can be adjusted by means of three small potentiometers. That way different kinds of control voltage ranges are possible, e.g.
-5V ... +5V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = off, Offset = 0)
0 ... +10V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = on, Offset = max)
-5V ... +5V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = off, Offset = max)
0 ... +10V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = on, Offset = 0)
On top of this the four quadrant voltages Q1, Q2, Q3 and Q4 are available. A quadrant voltage becomes positive when the joystick is positioned in the quadrant in question.
Each CV output is equipped with an LED that displays the present voltage.

Because of the construction height of the joystick (about 7 cm) the module cannot be installed into the cases A-100P6, A-100P9, A-100PMS6, A-100PMS9 and A-100PMS12 during transportation as the depth of the case cover is not sufficient. Into the base cases A-100PB and A-100PMB as well as in all other cases without cover the module can be installed without problems.

HP : 12
Read more
coming soon TBA
FORTHCOMING
Qu Bit Cascade Ratcheting Envelope Generator Module
Cat: 766031 Rel: 31 Dec 20
 
envelope generator module
Notes: Cascade is a ratcheting envelope generator featuring burst generation, a flexible curve parameter, and two discrete level controls. Freeze allows you to lock the output voltage exactly where it is with the press of a button or a gate input. The Cascade can be transformed into several other modes, including ASR, ADSR, dual AD, and a gravity-based bouncy-ball mode.
Read more
MRP:$257.03 SAVE 17%
coming soon $214.19
FORTHCOMING
Behringer Eurorack Rack
Behringer Eurorack Rack (19" Eurorack rack mount)
Cat: 780464
 
rack-mount kit with power supply
Notes: The EURORACK RACK is ideal for any Behringer Eurorack-style synthesizer or equipment. This desktop/rack-mount kit converts a 19" rack into an 84 HP Eurorack chassis. A compact 4 HP power supply with two flying bus boards are included together with a 3A universal power adapter. 52 sliding nuts allow you to easily position your modules so you can freely position your synth wherever you need it.
Read more
coming soon TBA
FORTHCOMING
Tangerine Dream: Itinerary: The Concert Memorabilia 1970-2014
Cat: 779750
 
10x12" memorabilia collection in coffee-table book format
Notes: This complex work is a painstakingly detailed and incredibly massive exhibit of Tangerine Dream's paper past. Presented in a 10x12" (ca. 25x30 cm) coffee-table book format - specifically designed to sit beside Edgar's Force Majeure autobiography perfectly, "Itinerary" has a scope of about 452 pages, and contains over 1,100 images of TD's posters, flyers, tickets, passes, programs, invitations, contracts, stage plots, spreadsheets, memos, itineraries, telexes, receipts, press releases, etc. - all of which has been described by one of the world's leading collectors of music memorabilia to be "the most astonishing collection of memorabilia by one band" he's ever seen.
Read more
coming soon $86.10
FORTHCOMING
Mordax Data Multifunction Tool Signal Analyser & Generator Module (white)
Cat: 783343 Rel: 02 Oct 20
 
Signal analyser & generator module
Notes: The Ultimate Eurorack Utility Module (and a whole lot more!)

The DATA is a digital platform for testing, measurement, and signal generation in Eurorack modular synthesis systems. It is a modular tool kit, with functions applicable to any system and style.

Use the DATA's scope to view the interactions between your control voltages and audio signals, allowing you to master your modules by understanding their voltage ranges, control shapes, and parameter responses. Use the DATA's dual waveform generator to dial in a precisely scaled LFO for CV control, or use the waveform's frequency "note mode" to effortlessly make dyads (two note chords). Use the DATA's clock program as a master clock or to divide or multiply an incoming clock signal, sending four different clock outs to gate modules directly or as control to sequencers.

The possibilities of the DATA are basically unlimited; with the included microSD you can update the DATA's firmware and we can continue to refine and create new programs.
Read more
MRP:$542.47 SAVE 21%
coming soon $429.46
FORTHCOMING
Behringer 921B VCO Module
Behringer 921B VCO Module (oscillator module)
Cat: 780467
 
VCO module
Notes: Enter the Behringer 921B OSCILLATOR. An authentic reproduction of the circuitry from the "Modular 55 and 35" series oscillators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921B OSCILLATOR module is controlled by the Behringer 921A OSCILLATOR DRIVER or can be used as a free-running LFO. Separate Frequency and Range knobs allow you to adjust the frequency range in semitones and in octaves. The 921B along with the 921A modules form the foundation of a proper modular synthesizer and the basis for some really great music.

The 921B OSCILLATOR features independent audio outs for each of the 4 waveforms which include sine, triangular, sawtooth and rectangular which can be patched out to different modules to unlock even more creative possibilities. A dedicated oscillator sync input and switch can be used to sync the 921B to a signal introduced into the Sync In jack. Parallel link jacks allow the 921B to link to other 921B in the chain.

Installing the 921B OSICLLATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921B OSICLLATOR to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $107.63
FORTHCOMING
Behringer 3 Tier Eurorack Module Stand Case
Cat: 780468
 
module stand case
Notes: Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
coming soon $67.80
FORTHCOMING
Native Instruments Maschine+ Standalone Production & Performance Instrument
MRP:$1,419.47 SAVE 17%
coming soon $1,182.89
FORTHCOMING
Joranalogue Morph 4 Dimensional Modulation Array Module
Cat: 790025 Rel: 31 Dec 20
 
Modulation hub for Eurorack synthesisers
Notes: Modulation is the core concept of modular synthesis: parameters changing over time, adding movement and musical interest to what would otherwise be merely static sounds. Being able to control the amplitude of signals throughout a patch is therefore essential, and one can never have too many voltage controlled amplifiers (VCAs).

Designed as a fully-featured modulation hub for Eurorack synthesisers, Morph 4 takes the basic concept of the multi-VCA module to the next level.

Four linear amplitude modulators are controlled by a master 'morph' parameter. The response of each modulator to this parameter is completely variable, both manually and under voltage control, and can be overridden if desired. Each response is triangular, with the 'position' parameter setting the maximum point along the morph axis, while 'span' determines the width of the triangle's base.

In addition to separate signal inputs and outputs, a variety of combined outputs is available as well: A+B, C+D, add (unity gain) and averaging mixes, and instantaneous minimum and maximum. Input normalisation makes it easy to send the same signal to multiple modulators, while output and modulator response LEDs provide essential visual feedback.

The combination of master control, fully flexible modulators and multiple combined outputs creates a module truly embodying the spirit of 'patch programmable' modular synthesis. Use Morph 4 as a voltage controlled mixer, dual crossfader, dual panner, interpolating scanner, interpolating distributor, quad VCA, quadraphonic controller, slope modifier, rectifier, complex waveshaper or something in between any of those- the choice is yours.

Read more
MRP:$410.73 SAVE 17%
coming soon $342.26
FORTHCOMING
Behringer Pro-1 Analog Synthesiser
Cat: 781519
 
analog synthesiser
Notes: The Behringer Pro-1 is a clone of the popular retro classic Sequential Circuits Pro-One which was once conceived to be a monophonic Prophet-5. Those who know and love recordings of Depeche Mode and Yazoo, will enjoy recognizing a lot of those sounds with the Pro-1.

The two assertive oscillators, each based on a CEM3340 chip, have sawtooth and square waveforms, an octave switch, fine tuning and pulse width control. Oscillator A can be synchronized to oscillator B, the second tone generator is additionally equipped with the triangle waveform and can be switched to low mode as well as decoupled from the pitch control. Both VCOs are brought together in the mixer, where the noise generator is also located, which can be replaced by an external signal. The beautiful basic sound is processed with a characterful 24dB lowpass filter, also known as Curtis VCF. It behaves similar to a Moog filter, but due to the IC CEM3320 it sounds different than the transistor cascade. The two crisp ADSR envelopes are assigned to the filter and VCA. An LFO with three waveforms is connected to the targets via the modulation bus. The special features of this instrument include the waveforms that can be activated simultaneously in both oscillators and in the LFO.

The modulations are assigned on the left side of the control panel. The filter envelope, oscillator B and the LFO, each with their own attenuator, are available in parallel as sources. These are assigned to the targets frequency oscillator A+B, pulse width oscillator A+B and cutoff directly or via the modulation wheel (or midi controller). Wild oscillator drifts, sync sounds, sirens, FM for filter and/or oscillator A as well as pulse width modulation are possible if used with care. If you turn everything up at once, it gets really wild! The modulation bus is the hottest feature of the Pro-1 next to the sound.

The ingeniously simple sequencer provides access to two patterns, each of which can be up to 40 steps long; pauses can also be programmed. The notes are played via a connected MIDI keyboard. After the input, the patterns can be transposed with the keyboard. The Arpeggiator primarily offers the playback modes Up and Up&Down, but can also be integrated into the pattern. Synchronization to other equipment is done via the analog clock input or MIDI/USB.
Read more
coming soon $339.03
FORTHCOMING
Malekko Quad LFO Module (black faceplate)
Cat: 766096 Rel: 31 Dec 20
 
LFO module
Notes: An LFO, or low frequency oscillator, sends control voltage out in the shape of a waveform. The Quad LFO available shapes include sine, ramp, saw, triangle and pulse and moves through these shapes using the SHAPE slider. You can send these 4 distinct LFOs directly out or to other modules for frequency modulation, VCA control, filter control, etc.

What makes this Quad LFO module different is that it also includes a 16 step automation sequencer for each channel, as well as autosave or expanded preset functions when used in conjunction with Varigate 4+ and Varigate 8+.

Multiple Quad LFOs can be controlled by one Varigate 8+ or Varigate 4+ on the same bus to instantly save/recall presets.

To create a sequence of automation for an LFO, select a channel and then hold the RECORD button and move the sliders for Frequency, Phase, Shape, Distort and Level and those slider movements will play back automatically as the Quad LFO cycles through the sequence. This sequencing feature allows for a multitude of dynamic possibilities for live performance and recording.

Set each LFO to trigger via one of the 4 individual gate inputs, or set channels 2 through 4 to follow channel 1 for quadrature and phase modulation. Change the direction of each channel of sequenced automation to Forward, Reverse, Pendulum or Random. Switch the playback speed and style between Fast, Slow or Tempo Sync. There are also inputs for both Clock and Reset.


Read more
MRP:$355.19 SAVE 17%
coming soon $296.00
FORTHCOMING
Klarkteknik 3rd Dimension BBD-320 Analog Multi-Dimensional Signal Processor
Cat: 782075
 
Multi dimensional signal processor
Notes: Analog Multi-Dimensional Signal Processor with BBD Technology

Read more
coming soon $148.53
FORTHCOMING
Intellijel µMIDI 1U Module
Cat: 785361 Rel: 21 Oct 20
 
MIDI voice and clock interface
Notes: All the essentials to control and sync your rack to your computer, iPhone/iPad, or hardware MIDI device. No menu diving or configuration scripts, just two buttons. Get crazy with external modulation and sequencers, or just sync your rack's clock from your MIDI bus.

The uMIDI 1U provides all the essentials to control and sync your Eurorack modular from your computer, iPhone/iPad, or hardware MIDI device with a minimum of fuss. No menu diving or configuration scripts, just two buttons. The connectivity, features, and compact size allows the integration of your modular system with the rest of your studio while not taking up too much space in your case.

The clock section to the left features a dedicated 16th note clock output ideal for synchronizing a Eurorack sequencer like the Metropolis. A second clock output with selectable divisions can be used when difference sync events are needed. The run and reset outputs can reset your Eurorack sequencers in tandem with any external sequencer or DAW.

The right half of the uMIDI 1U gives you everything you need (like pitch, gate, trigger, velocity, mod wheel and assignable CC) to control a single voice synth via MIDI.

This module connects via ribbon cable to the uMidi JACKS 1U module or to the MIDI I/O jacks on the back of the 7U performance cases.
Read more
MRP:$240.24 SAVE 17%
coming soon $200.19
FORTHCOMING
Tangible Waves AE Modular ALGODRONE Bytebeat Algorithms Module
Cat: 786475 Rel: 31 Dec 20
 
Algorithms module
Notes: Explore the world of bytebeat algorithms with ALGODRONE!

The ALGODRONE module is a sound source based on the so-called bytebeat algorithms. These are simple formulas, usually expressed as one line of program code, that spit out a wide variety of interesting tonal to rhythmical patterns, regardless of their simplicity.

The ALGODRONE module contains a number of these algorithms plus three parameter knobs that change values within the current algorithm. These changes vary from subtle to dramatic, even with small changes, depending on the algorithm and the setting of the other parameters.

Some algorithms create sound loops, to use these more flexible the ALGODRONE can work in a kind of "granular" mode where a smaller part of the entire loop is repeated and with the POSITION knob you can move through the entire output loop.

To maximize the variability, the parameter and "granular" values can be CV controlled too!

All in all a real kaleidoscope that will surprise you every time!
Read more
MRP:$99.45 SAVE 17%
coming soon $82.87
FORTHCOMING
Tangible Waves AE Modular FMOS FM Synthesis Module
Cat: 786477 Rel: 31 Oct 20
 
Synthesis module
Notes: FM synthesis for the AE!

The FMOS is a new digital oscillator that brings FM synthesis to the AE modular! It offers the basic FM synthesis with one oscillator and one modulator, running both with sine waves or triangle waves. The modulation depth and frequency ratio of the modulator can be set with a knob and additionally by CV control. If you want pure sine waves, this is for you too - simply set the modulation level to 0.

The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
Read more
MRP:$52.96 SAVE 17%
coming soon $44.12
FORTHCOMING
Joranalogue Fold 6 Multi-Topology Wavefolder Module
Cat: 790028 Rel: 31 Oct 20
 
Wavefolder module
Notes: Often considered to be the opposite of filters within a modular system, wavefolders are designed to fold a signal over itself multiple times. This generates additional harmonics, resulting in rich timbres.

While there is a bewildering array of filter types within the synthesiser world, most wavefolders fall within only a few categories. Diode wavefolders in particular come in just two variants: series and parallel circuit topologies. Choosing a specific folder also means being limited to specific sounds and capabilities.

For the first time, Fold 6 puts forward a 6-stage hybrid series/parallel topology, yielding a greater sonic palette than ever in just 4 HP. Having both main (series) and alternate (parallel) outputs means a single module now gives access to just about all wavefolding tones imaginable.

To take things even further, an integrated symmetrical soft clipper limits the output signals to approximately 10 Vpp, keeping the amplitude within typical Eurorack levels and making it easier to create overdriven sounds at high fold ratios. This clipping stage can be driven continuously using the shape parameter, smoothly transforming the folded waveforms into pulse waves for even more harmonic content.

Two signal inputs are included, to mix audio signals or add in a DC voltage for asymmetric folding. The symmetry can also be manually controlled using the dedicated knob. Of course, both fold and shape parameters feature voltage control, to enable continuous timbral modulation.

Moving beyond simple signal processing, Fold 6 also lends itself perfectly for feedback patching, CV folding or frequency multiplication; its modest size belies the sonic capabilities within.

Read more
MRP:$187.28 SAVE 17%
coming soon $156.06
FORTHCOMING
Tangible Waves AE Modular QUANTIZER Automatic Musical Scales Module
Cat: 786489 Rel: 31 Oct 20
 
Quantizer module
Notes: The QUANTIZER takes four different CV inputs and processes them in a way that the CV values "snap" to the exact values so that oscillators controlled by the outputs of the module play the notes of a selected musical scale. With an encoder one of 16 scales can be selected and is displayed in a text display,

There are 4 independent channels that are quantized to the same selected scale.

As an additional feature, the module provides a trigger signal for each channel on every change on the output CV.

Finally, with a switch the scale selection can be "frozen" so there is no accidental change possible.

There are 4 independent channels that are quantized to the same selected scale.

Module power consumption: 15 mA

Inputs
CV 1 - accept CV for channel 1 of the quantizer
CV 2 - accept CV for channel 2 of the quantizer
CV 3 - accept CV for channel 3 of the quantizer
CV 4 - accept CV for channel 4 of the quantizer
Outputs
CV 1 - Quantized CV from channel 1 of the quantizer
CV 2 - Quantized CV from channel 2 of the quantizer
CV 3 - Quantized CV from channel 3 of the quantizer
CV 4 - Quantized CV from channel 4 of the quantizer
TRIG 1 - Gate signal on change of CV from channel 1 of the quantizer
TRIG 2 - Gate signal on change of CV from channel 2 of the quantizer
TRIG 3 - Gate signal on change of CV from channel 3 of the quantizer
TRIG 4 - Gate signal on change of CV from channel 4 of the quantizer
MULT - unbuffered multiple, unconnected from the module's circuitry
B. CV - CV signal from MIDI
Please note:

The notation of the outputs is slightly different on the panel than indicated here. There are two rows of identical outputs, side by side. For each output-trigger there is an activity LED, indicating a change in quantized CV.

Controls
SCALE Knob - selects the current scale. 16 scales are available, the selected scale will be displayed in the small display to the right of this knob
LOCK Switch - prevents accidental changes of the selected scale when activated
OFFSET Knob - Select from up to 12 notes from the well-tempered scale as base-value, depending on the scale selected. All left would be equivalent to a key of C
Please note:

Scale selection directly takes place when the SCALE Knob is turned, clicking it has no specific effect.

Available SCALES, as indicated on the display, are as follows:

Minor (e.g. equivalent to A-B-C-D-E-F-G in ‘A minor’)
Major (e.g. equivalent to C-D-E-F-G-A-B in ‘C major’)
Dorian (e.g. equivalent to C-D-Eb-F-G-A-Bb in ‘C Dorian mode’)
Phrygian (e.g. equivalent to C-Db-Eb-F-G-Ab-Bb in ‘C Phrygian mode’)
Lydian (e.g. equivalent to C-D-E-F#-G-A-B in ‘C Lydian mode’ )
Mixolyd [Mixolydian] (e.g. equivalent to C-D-E-F-G-A-Bb in ‘C Mixolydian mode’ )
Locrian (e.g. equivalent to C-Db-Eb-F-Gb-Ab-Bb in ‘C Locrian mode’)
Gypsy (e.g. equivalent to C-D-Eb-F#-G-Ab-B in ‘C Hungarian minor scale’ )
Whole (equivalent to C-D-E-F#-G#-A# or B-Db-Eb-F-G-A as ‘Whole tone scales’)
Pent Min [Pentatonic Minor] (e.g. equivalent to C-Eb-F-G-Bb in ‘C Minor pentatonic’)
Pent Maj [Pentatonic Major] (e.g. equivalent to C-D-E-G-A in ‘C Major pentatonic’)
1-3-5 (e.g. equivalent to C-E-G in ‘C’)
1-3-4 (e.g. equivalent to C-E-F in ‘C’)
Fifth (e.g. equivalent to C-G in ‘C’)
Octave (e.g. equivalent to C in ‘C’)
Chromat (The 12 welltempered notes of the chromatic scale)
Read more
MRP:$76.20 SAVE 17%
coming soon $63.50
FORTHCOMING
Tangible Waves AE Modular SOLINA String Machine Emulation Module
Cat: 786501 Rel: 31 Dec 20
 
String machine emulation module
Notes: SOLINA, an emulation of the 70ies string machines!

The SOLINA module is based on th excellen work of Jan Ostman, who has developed a very good digital based emuation of the sound of the string synths that were popular in the music of the 70ies and 80ies, like ARP Solina (who gave this module it's name), Logan String and others.

Their unique sound is based on several, minor detuned sawtooth oscillators and an ensemble effect.

This module produces chords, which can be shaped in different ways, like selecting the base scale (minor, major), adding the 7th or a bass note and different variations of the chord. The sound can be shaped with a variable oscilator spread/detune, adding a phaser/ensemble and a tone knob for choosing the overall character between bass focused to only higher parts of the sound.
Read more
MRP:$93.00 SAVE 17%
coming soon $77.48
FORTHCOMING
2hp Loop Module (silver faceplate)
2hp
Cat: 766646 Rel: 31 Dec 20
 
sound looper module
Notes: Sound on sound looper with 5 minute audio buffer.

Audio specs: 48kHz, 24 bit.
Read more
MRP:$178.24 SAVE 17%
coming soon $148.53
FORTHCOMING
2hp Loop Module (black faceplate)
2hp
Cat: 766647 Rel: 31 Dec 20
 
loop module
Notes: Sound on sound looper with 5 minute audio buffer.

Audio specs: 48kHz, 24 bit.
Read more
MRP:$178.24 SAVE 17%
coming soon $148.53
FORTHCOMING
NUX MG-300 Guitar Multi-FX Pedal
NUX
Cat: 785758 Rel: 24 Oct 20
 
Multi-FX pedal
Notes: The NuX MG-300 is a compact yet powerful live multi-effects processor, recording tool and practice companion for guitar players. Integrated effects sections include Drive, Amp Simulation, I.R cabinet simulation, Modulation, Delays & Reverbs with a host of options within each category. Audio modelling is based on the NuX TSAC algorithm, which delivers high definition analogue circuit simulation for pro quality guitar tones. An expression pedal covers wah and swell effects amongst other possibilities. All settings can be edited onboard or via USB using the downloadable PC/Mac Quicktone software and then stored into one of 36 internal memory locations. For live or rehearsal backing, the built-in Jam function has a fully featured drum machine and phrase looper. To integrate with a DAW studio suite, the USB also functions as a high quality audio interface, completing the studio-ready guitar rig. The main output has options for guitar amplifiers, D.I to studio equipment or straight to a pair of headphones. On-the-fly controls and a full colour display complete the package, providing a comprehensive and affordable guitar workstation in a very portable format.

The box for this item contains :
NUX MG-300 multi-FX pedal
9Vdc UK power adaptor

Specifications:
Power supply: 9Vdc, 260mA pin-negative (adaptor included)
Inputs: 6.3mm jack (guitar), 3.5mm jack (aux input)
USB: portMicro-USB for audio interface and PC/Mac editing
Sampling format: 48kHz, 24-bit
Frequency response: 20Hz - 20kHz (i1dB)
Output: 6.3mm jack to mixer, amp or headphones
THD: +N<0.03%
Dynamic range: 110dB
Input level: -20dB
Output level: -10dB
Dimensions: 230 x 160 x 58mm
Weight: 754g
Read more
MRP:$140.78 SAVE 24%
coming soon $106.54
FORTHCOMING
Division 6 Business Card Sequencer V2
Cat: 777968
 
business card sequencer
Notes: The Division 6 packs a lot of sequencer into a tiny package! This 16-step circuit can work as a sequencer or as a handheld keyboard.

Specifications:
Power In: 7-15VDC, tip positive through a 3.5mm jack. Find a voltage source on your synth to power it if you can! A 9V battery or AC adapter will work too.

Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$107.20 SAVE 19%
coming soon $87.17
FORTHCOMING
Intellijel XY I/O 1U Module
Cat: 785358 Rel: 21 Oct 20
 
Conncector for Intellijel products
Notes: Use this module to tap into the 3-pin LINK connector used in several Intellijel products, including Mixup, Pedal I/O and the Palette and 2nd Generation Audio Jacks Board in a 7U case.

The XY I/O uses two 3.5mm TRS jacks, which accept insert cables to provide send/return capability to a pair of Pedal I/O's, or additional stereo inputs (or outputs) to a pair of Mixups, or one of each.

A third 3-pin Link connector on the back panel allows the X and Y jacks to access the L/R (or Send/Return) jacks on a single connected module or case without needing a stereo cable.
Read more
MRP:$27.12 SAVE 17%
coming soon $22.59
FORTHCOMING
Korg Volca Sample 2nd Generation Digital Sample Sequencer
Cat: 789384 Rel: 31 Oct 20
 
Digital sample sequencer
Notes: A new generation volca sample with more memory, features, and connectivity to take your music production further than ever before.

The volca sample is the compact and powerful sample-based drum machine that has captured the attention of countless creative players around the world.

This 2nd generation version retains all of the features which made the original so popular, and adds a micro USB port for better connectivity, increased sample memory, a new up to date sound library and additional functions for an improved workflow.

The new volca sample has everything that you need to advance your music creation in a compact form that works in the studio or anywhere you take it.

On its own, it is an advanced sample machine with a powerful engine capable of 8 voice polyphony, digital reverb and a dual band analogue isolator. Totally hands on, this new volca sample provides an amazing array of knobs for sample manipulation and performance sound-shaping. Plus, for added convenience, it runs on 6 AA batteries, has an integrated speaker and at only 372g/13oz (without batteries) is perfect for stand-alone use!

Furthermore, with its USB, SYNC IN-OUT and MIDI connections, volca sample can integrate seamlessly with your live rig, production studio and of course any other volca!

The new micro USB port provides a convenient connection between the volca sample and a computer for streamlined integration and sample management, allowing you to easily control, sync, and play your volca sample from any DAW. With newly added individual MIDI channels assignment per part, it is now easier to perform when using an external device such as a sequencer or keyboard.

With the volca sample's dedicated Librarian software (available for Mac and PC) utilising the USB port managing and sending your samples and patterns back and forth is now an instantaneous and pain-free process.

You can also use the dedicated app AudioPocket manager for iOS to record new samples on the fly and transfer them to your volca sample instantly.

Two new features have been added to this new volca sample that will help in your music making process:
Pattern chain mode with 2 different STEP JUMP modes
Start delay function: Go "off the grid" with the new delay feature that lets you slightly delay the start of any part to achieve different kinds of grooves or a swing feel.
More Memory, Pattern Locations, Samples, and Bonus Packs!

Volca Sample 2 has an increased memory of 200 memory slots; double its predecessor. 50 are left empty so you can load either your own original or pre-made libraries. Pattern locations have also have been increased from 10 to 16.

The new generation of volca sample comes with a brand-new sound library that has been carefully crafted to fit the needs of all music producers and beat makers everywhere.

This great selection of 150 samples will take your production to the next level, making it possible to make tracks on the fly with sounds that will fit every genre, including recent ones such as Future bass, Trap, Lo-Fi hip hop, and many others!
Read more
MRP:$205.36 SAVE 17%
coming soon $171.14
FORTHCOMING
Endorphin.es Queen Of Pentacles 7 Voice Analogue Drum & Percussive Syntheiser Module
Cat: 791289 Rel: 31 Dec 20
 
7-voice analogue drum & percussive synthesiser module
Notes: Queen of Pentacles is a complex 7 voice analog drum/percussive synthesizer module based around:

3 analog discrete TR-909 circuits with advanced noise spectrum animation

4 zero latency microSD card sample players - including a set of freshly recorded samples for modern electronic music using handcrafted Paiste 602 15" and 18" cymbals

Effect processor as found in famous Grand Terminal/Milky Way/Blck_Noir

The new Queen of Pentacles covers the range of Dance/EDM/Techno music styles and is inspired by the famous TR-909.

The module offers seven drum sounds. Three drums are analog - bass drum, snare drum and clap. The other four drums are sample-based. Just .wav files playback directly from a microSD card with additional volume envelope, decay and pitch control. Those are simple modifiers but help you to shape the sounds played as one-shots.

There are 7 sounds in the drum kit. 3 drums are analogue - bass drum, snare drum and clap. These 3 are generated analogue for the following reason: each sound has its own binary noise generator and really - each time they are triggered the flavor is unique - they simply never repeat. At the same time they don't phase out each other as in the original 909, which is great - for example in the situation when reinforcing the clap on 2nd and 4th with an additional beat of the snare.

The other 4 drums are sample-based. Just .wav files playback directly from a microSD card with additional volume envelope, decay and pitch control. Those are simple modifiers but help you to shape the sounds played as one-shots.

Back then when Endorphin.es launched BLCK_NOIR, they introduced the next product line with black panels, as people liked the new styling. Now, along with continuation of the black panels comes another leap forward: New aluminum knobs suit the design perfectly.
Read more
MRP:$645.80 SAVE 17%
coming soon $538.16
FORTHCOMING
SynthRotek West Coast Noise System
SynthRotek West Coast Noise System (modular synthesiser system)
Cat: 778522
 
noise module
Notes: Clear a room faster than ever with the West Coast Noise System. The amount of insanity you can create from so few modules is incredible. It's analog drums, 8bit crunch and noise married to a sequencer. Be sonically devastating or intriguingly melodic.

The West Coast Noise System is powered by Synthrotek's Case Power Mini Yellow, which has the following amperage specs: +12v @1A; -12v @ 0.5A; +5v @ 1.5A

Modules:

Sequence 8
MST Noise Sample and Hold / Track and Hold
Atari Punk Console
DS-M
DIRT Filter
DLY Module
1U UniBuffer
1U Stereo Output Mixer
Read more
MRP:$1,084.94 SAVE 21%
coming soon $861.06
FORTHCOMING
Tangible Waves AE Modular Case Hinge Kit Type 2
Cat: 786533 Rel: 31 Oct 20
 
Case hinge kit for Tangible Waves AE Modular
Notes: The case hinge kit allows it to join two cases at a free angle. It contains:

two joint elements
four screws
a connection cable between the cases.

This type is designed for an application where the lower case is already fixed above the surface (e.g. when mounting a third case to a combination of two cases connected with the hinge kit type 1).

Via the connection cable the bus and power supply is shared between both cases, so no extra power supply / second MASTER module is needed for the additional case.
Read more
MRP:$16.79 SAVE 17%
coming soon $13.99
FORTHCOMING
Apogee Symphony Desktop Audio Interface
Cat: 762366
 
audio interface
Notes: Symphony Desktop for Mac and Windows packs the legendary sound quality of Apogee's rack-mount Symphony I/O Mk II into an elegant and inspiring 10x14 audio interface that sits on your desk and fits in your bag. With Symphony Desktop, musicians and producers are empowered to record, overdub and mix with the music industry's most respected AD/DA converters and mic preamps.

By combining superior performance, with new features like mic preamp emulation, the Apogee Channel FX plugin and ultra low latency recording with hardware DSP and Apogee native FX plugins, Symphony Desktop will amplify your creativity in your studio or on the go and give your recordings the Apogee sound quality Advantage.

Symphony Desktop not only delivers the music industry's most sought after and respected sound quality with its Symphony I/O Mk II pedigree, it offers the inspiring and elegant usability of the iconic Apogee Duet and Quartet.

Apogee FX Plugins included with Symphony Desktop:

Symphony EQ - Native and hardware versions
Symphony Compressor - Native and hardware versions
Symphony Reverb - Native version

Mic Preamp Emulations included with Symphony Desktop:

British Solid State - Class A console sound - Inspired by the Marinar "Round can" input transformer and discrete transistor design of the Class A Neve 1066 mic preamp.
American Tube - Lush, 50s Tone - This emulation offers the lush, larger-than-life sounds of the 50s era Ampex 601 preamp, carefully restored and modded for lower noise and greater dynamic range.

In the Box:

Symphony Desktop
12V DC power supply
USB Type C to A cable
USB Type C to C cable
Quick start guide
Read more
MRP:$1,677.79 SAVE 17%
coming soon $1,398.16
FORTHCOMING
2hp Pitch Module (silver faceplate)
2hp
Cat: 766651 Rel: 31 Dec 20
 
pitch module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$142.08 SAVE 17%
coming soon $118.40
FORTHCOMING
Befaco DIN5 MIDI To TRS Type B Cable (1.5m, pack of 3)
Cat: 784170 Rel: 08 Oct 20
 
DIN5 to TRS cable
Notes: 3,5mm TRS to male DIN 5

150cm length
Read more
MRP:$15.50 SAVE 31%
coming soon $10.76
FORTHCOMING
Division 6 Business Card Synthesizer (fully assembled)
Cat: 777973
 
business card synthesiser
Notes: The Business Card Synthesizer is a tiny synth that can be connected to a Business Card Sequencer, other synth gear, or played by itself.

Headphones can be connected directly to the output of the synth, and there are plenty of knobs to play with, so you can easily make noises anywhere. Great for learning about synthesizers!

S&H Button: Enables Sample & Hold, which disables the external CV IN jack and uses LFO1 and LFO2 to determine oscillator pitch. LFO1 sets the sample rate (SHAPE is ignored for this), and LFO2 is the wave that gets sampled.

GATE Button: Manually turns on the gate so sound comes out of the synth. This control is momentary, but you can latch it on by tapping the S&H button while holding the GATE button down.

COARSE TUNE: Adjusts the pitch of the oscillator up or down in large increments

FINE TUNE: Adjusts the pitch of the oscillator up or down in fine increments

SHAPE: Changes the shape of the wave produced by the main oscillator (VCO). Turning this control fully CW gives you a triangle wave. Start turning it CCW takes you through sawtooth/ramp, then at about the 12:00 position you get a square wave. Continue turning it CCW and you get several higher duty cycle square waves
.
GLIDE: Adjusts the rate at which the pitch of the VCO takes to go between pitches (whether changed by the COARSE TUNE knob or CV IN). Fully CCW causes the pitch to react almost instantly, while fully CW makes it take its sweet time.

LFO 1 / LFO 2 SHAPE: Changes the shape of the waves produced by the low-frequency oscillators (LFOs). The shapes are similar to those of the VCO, except that the LFOs have sawtooth/ramp waves that go both up and down (since you can actually hear the difference at LFO rates).

LFO 1 / LFO 2 RATE: Controls how fast the LFOs go.

LFO -> VCO: Routes the two LFOs to control the pitch of the main oscillator. The 12:00 position is basically "off", and the LFOs have no effect on pitch. Start turning the control CCW and LFO1 starts changing the pitch of the VCO. Maximum effect is at about 10:00. Continuing to turn the control starts to bring in LFO2 as well. All the way CCW gives you full effect from both LFO1 and LFO2.

Turning the control CW from 12:00 does essentially the same thing, but brings in LFO2 first, then LFO1.

This might seem like kind of a weird control, but it gives you quite a bit of routing flexibility with one knob. You can have no pitch modulation, LFO1, LFO2, LFO1 with a little LFO2, or LFO2 with a little LFO1.

LFO -> VCA: Routes the two LFOs to control the amplitude of the oscillator. (See LFO -> VCO control description above for more information about how the control works.)

ATTACK: Controls how fast the audio amplitude fades in when the gate is triggered. CCW is fast and CW is slow.

DECAY: Controls how fast the audio amplitude fades out when the gate is released. CCW is fast and CW is slow.

VOLUME: Controls the overall volume of the signal coming from AUDIO OUT.

FILTER: Changes the cutoff frequency of an analog low-pass filter. Turn the knob fully CW and all frequencies (that you can hear) are let through. Start turning it CCW and the high frequencies start getting cut off, until the sound becomes muddy / muffled. Use in conjunction with the SHAPE control to get the tonal quality you are looking for.

Connections:
CV IN: Accepts a 1 volt/octave control voltage to control the pitch of the oscillator. It responds from about 0-5V, but voltages outside of this range won't cause damage. The CV input is quantized, so only valid (western scale) notes are played. This input is ignored when Sample & Hold is enabled.
GATE IN: A voltage greater than about 2.5V will turn on the gate and allow audio to come out the output of the synth.
AUDIO OUT: Connect to an amplifier or another synth. The jack has both the tip and ring connected, so you can even use stereo headphones and hear sound from both ears.
Power: Connect 7.5-15VDC to this 3.5mm TS jack to power the synthesizer. The tip is positive (don't worry, there's a protection diode in case you get it reversed). You can get power from a 9V battery, AC adapter, or you may even be able to find an output on your modular synthesizer that can provide enough current.

Specifications:
Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$107.20 SAVE 19%
coming soon $87.17
FORTHCOMING
Arturia PolyBrute 6 Voice Analogue Polysynthesiser
Cat: 789226 Rel: 30 Sep 20
 
6-voice analogue polysynthesiser
Notes: Imagine using 6 analog voices to craft a sound that's powerful, raw, and entirely yours. Imagine a sound existing in two states simultaneously in a single preset, with seamless morphing between them. Imagine multi-axis performance controls offering next-generation musical expression. Imagine instant and limitless modulation at your fingertips. Imagine a polysynth made by musicians, for musicians.

Raw, powerful, organic. The analog Brute voice is an unmistakable sonic force to be reckoned with - how about six at once?

PolyBrute's six-voice power starts with two Brute waveshaping oscillators. With sprawling timbral versatility from delicate airy pads to snarling stacked bass, these are six voices you can count on to excel in every application.

The tactile and reactive nature of analog synthesis is right at the heart of PolyBrute's architecture. Tame or animate the oscillators with an expanded array of multiple filters, envelopes and LFOs for absolute control over the analog domain. Once you've harnessed its sound sources, PolyBrute is your vessel for an inspiring voyage into sound.

PolyBrute's morphing abilities let you perform, compose, and explore sound without boundaries.

Imagine being able to sweep all the parameter settings between two different patches all at once. PolyBrute goes even further with its groundbreaking ability to gradually morph between two completely different states within any patch.

For morphing to work, hands-on control is essential - PolyBrutes takes it to another level. The all-new Morphee three-dimensional performance touchpad ensures that intricate morphing expression is always right at your fingertips. Manipulate any facet of PolyBrute's sound, from delicate morphing to extreme dynamic shifts, across the X, Y and Z axis in an instant.

It doesn't end there; PolyBrute is armed to the teeth with articulate controllers to give your performances and compositions the elusive human touch.

This unparalleled sonic flexibility and expressivity is what earns PolyBrute its place in synthesizer history - a trailblazer of creativity.

The Matrix- the digital brain for PolyBrute's analog heart. The Matrix is where PolyBrute's analog reactivity and digital precision collide - an advanced architecture unlike any synth before it.

PolyBrute puts all that analog power right up front with dedicated knobs and switches, offering unmatched control and immediacy.

Almost everything you touch also generates MIDI, so you can capture your every move as part of your DAW productions. Need some instant attitude? Crank up the enhanced Steiner filter's Brute Factor. Want to change the cutoff on both filters at once? Grab the Master Cutoff knob. Time to move the floor beneath your feet? Dial in VCO 2's sub-oscillator. It's all right there in front of you.

Library management, parameter editing, and instant integration with your DAW.

Hook PolyBrute up to your computer and enjoy seamless bi-directional editing and organization. PolyBrute Connect bridges the gap between hardware and software like never before, letting you incorporate its expansive sound into your virtual studio workflow. Construct patches, go deeper with morphing tweaks, and control PolyBrute's sound in real-time from your Mac or PC - simple.

An instrument of this magnitude is deserving of only the highest attention to detail - PolyBrute is a synthesizer years in the making.

It's undergone rigorous testing to ensure a build quality of the finest calibre. Controls, buttons, and expressive components that are a delight to use, time after time. Its pristine metal chassis is embellished with luxurious dark walnut appointments for a timeless aesthetic, with a sleek, modern flare that sets it apart from the crowd.

PolyBrute is something unmistakably new, while remaining firmly rooted in synth design heritage.

Analog Morphing Synthesizer:
6 voices of Polyphony
Mono, Unison, Poly voicing
Single, Split, Layer modes

Two Analog VCOs:
Saw
Triangle + Metalizer
Square + Pulse Width
Sub
Linear FM
Hard Sync

Three LFOs:
LFO1 and LFO2 with waveform selection
LFO3 with waveform shaping using Shape and Symmetry
Rate control & Tempo Sync
Various retrig options

Three stereo digital effects:
Modulation FX : Chorus, Phaser, Flanger, Ring Modulation, ...
Delay : 9 algorithms including BBD, Digital delay, ...
Reverb : 9 algorithms including Hall, Plate, Spring, Shimmer,

Box contents:
PolyBrute unit
Power cable

Instrument size : 38.3 x 14.9 x 4.4 inches (972 x 378 x 110mm)
Instrument weight : 44 lbs. (20 Kg)
Read more
MRP:$2,917.72 SAVE 17%
coming soon $2,431.44
FORTHCOMING
Audio Technica ATH-M50X Limited Edition Professional Studio Monitor Headphones (purple & black)
Notes: As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year. Now, the ATH-M50x professional monitor headphones feature the same coveted sonic signature, with the added feature of detachable cables. From the large aperture drivers, sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.

Type: Closed-back dynamic
Driver Diameter: 45 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 28,000 Hz
Maximum Input Power: 1,600 mW at 1 kHz
Sensitivity: 99 dB
Impedance: 38 ohms
Weight: 285 g (10 oz), without cable and connector
Cable: Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
Accessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter
Read more
MRP:$193.74 SAVE 17%
coming soon $161.44
FORTHCOMING
Erica Synths Sequential Switch V1 Module
Cat: 780453
 
Switch module
Notes: Erica Synths 8 channel Sequential Switch is the first assembled module for Erica synths, and it allows you to sequence up to eight sound sources in advanced ways or route one sound source sequentially to eight different sound modifiers- VCFs, waweshapers, VCAs, etc.

It has unique control interface that allows you to pause, skip and merge steps, set sequence length, but what really sets it apart from other sequential switches is Gate output- when used with ADSR and VCA, you get really powerful sequencer with real time control over each sound source in the sequence. Use sequential Switch with random clock source and you get a heart of insane random, self-generating patches!

Technical characteristics:

Panel width: 14HP
Module depth: 20mm
Max power consumption (all LEDs on): 52mA@+12V, 13mA@-12V
Read more
MRP:$144.66 SAVE 54%
coming soon $66.72
FORTHCOMING
Tangible Waves AE Modular MS20 FILTER Module
Cat: 786479 Rel: 31 Oct 20
 
Filter module
Notes: The famous MS 20 filter for AE modular!

This adaptation of the filter used first in Korg's MS-20 synth for AE modular offers control knobs for cutoff frequency, resonance and CV attenuator. Two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter this filter has a significant self resonance and also a very quick response to changes in the cutoff frequency.

The filter type is switchable between lowpass and highpass (LP/HP switch).
Read more
MRP:$46.50 SAVE 17%
coming soon $38.74
FORTHCOMING
Yamaha HS7 Matched Pair Powered Studio Monitors (black, pair)
Cat: 785335 Rel: 21 Oct 20
 
Studio monitors
Notes: In the 15 years since they were introduced, the HS Series powered studio monitors have become a favourite in professional, project and home studio environments.

The new special edition HS7 MP Set includes two HS7 monitors, both manufactured using a unique process and both utilising specially selected parts. The result is a pair of monitors, each as closely matched to one another as is possible.

2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter
54Hz - 30kHz (-10dB), 74Hz - 24kHz (-3dB) frequency response
45W LF plus 25W HF bi-amp system for high-performance 70W power amplification
ROOM CONTROL and HIGH TRIM response controls
XLR and TRS phone jack inputs accept balanced or unbalanced signals

The HS Series embodies the design philosophy on which Yamaha has long insisted for its studio monitors, and is now available as a special paired model that uses selected volume parts. The paired model series bears the designation of MP (Matched Pair), and MP stickers are affixed to the back of each unit. Manufactured at the same time and with paired serial numbers, the HS MP models can play a valued role in your recording, mixing, and mastering work.

Yamaha Pro Audio's history of aspiration and innovation goes back to 1969. Since the creation of Yamaha's first pro audio products (the VA120 and VA180 vocal amp systems), they've repeatedly aspired and innovated to create a wide-ranging lineup for applications including broadcast studios and commercial spaces, such as mixing consoles, power amplifiers, speakers, processors, and immersive sound solutions, each with the aim of becoming the new standard in their respective market.

Monitor speakers are one of the product areas that must be mentioned when speaking of Yamaha Pro Audio's fifty-year history. The NS10M STUDIO which went on sale in 1977 was a studio monitor speaker loved by numerous engineers, and earned a role in studios around the world. In 1998 came the MSP5 powered monitor speaker which focused on providing the painstakingly faithful playback of the original sound that is demanded from nearfield monitors. Subsequently, the MSP/MSP STUDIO series that appeared during the period 2000 through 2008 benefited from a full measure of the know-how and technology that has been accumulated in the field of pro studio monitor design, going on sale as a flagship model that boasted a stunning degree of perfection.

Yamaha have insisted on complete fidelity to the original sound and the ability to reproduce the subtle changes of tone and position in the mix, and these principles are exemplified in the HS series that appeared in 2005 with its bright white cones. As high-bit and high-sampling-rate continue as trends in the field of music production, leading to an increasing need for high-quality nearfield monitors, these speakers deliver the high-quality sound and accuracy that are ideal for the studio environment. In 2013, fusing the know-how and cutting-edge analysis technology that has been developed through many years of studio monitor design, and carefully rethinking every element, the next-generation HS series have been announced, adds yet more polish to the accuracy of these speakers.
Read more
MRP:$722.00 SAVE 33%
coming soon $483.28
150/345(ページ1/7)の商品
1  2  3  4  5  6  7  »

Filter

Coming Soon: Studio Equipment
Close