Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.  Visit Juno DJ

Coming Soon: Studio Equipment

ホーム  Coming Soon  

Studio Equipment

Options
150/236(ページ1/5)の商品
1  2  3  4  5  »
FORTHCOMING
Soma Laboratory Pulsar-23 Organismic Drum Machine (black)
Cat: 781129
 
analog synthesiser/drum machine
Notes: Pulsar-23 is a multi-functional analog synthesizer and generator of complex rhythmic patterns.

The Pulsar consists of 23 different modules, including four flexible sound generators with completely different structures, four envelope generators, four looper-recorders, a clock generator with dividers, a controlled chaos generator, an LFO, a two-channel CV-controlled effects processor, distortion, two controlled amplifiers, an inverter, a controlled inverter and two controlled analog switches. In addition to these 23 main units, the Pulsar also contains 13 auxiliary units, such as a four-channel MIDI to CV converter, a noise generator, four attenuators, two dynamic CV generators with sensory control, two impulse converters and single passive electronic components for live circuit bending.

Pulsar-23 can be used for the synthesis of percussion instruments and rhythms, bass and melodic lines, effects and sound landscapes, as well as a source of control voltage. The Pulsar functions in three different modes: stand-alone, MIDI control and CV control. Moreover, all the above features and control modes can work simultaneously in any proportion or combination. Additionally, Pulsar offers live circuit bending capabilities and the use of the artist's body conductivity to create patches and cross modulations.

Pulsar continues the line of organismic synthesizers begun by LYRA-8, but now in the area of percussion instruments.

Also, it has MIDI control and synchronization and a lot of smaller modules such as 4 assignable attenuators and 2 dynamic CV sensors for CV generation etc. In general, there are 55 knobs, 11 switches and over 100 inputs and outputs for patching, Eurorack integration, external mixing and processing, live circuit bending!

It comes in a special HQ bag with 30 alligator clips cables and PSU.
Read more
MRP:$2,195.36 SAVE 17%
coming soon $1,829.46
FORTHCOMING
Behringer 2600 Semi-Modular Analog Synthesizer
Behringer 2600 Semi-Modular Analog Synthesizer (semi-modular analog synthesizer)
Cat: 799849
 
Analogue synthesiser with 3 VCOs and nulti-mode VCF
Notes: Semi-modular analog synthesizer with 3 VCOs and multi-mode VCF in 8U rackmount format.

An ultra-affordable and even more feature-packed homage to that iconic synthesizer comes in the form of the Behringer 2600. Conjure up the virtually any sound imaginable with incredible finesse and ease. The pure analog signal path is based on the authentic ARP 2600 circuitry from the 70s with matched transistors and JFETs. Owning a 2600 is like having your piece of history enabling you to re-create timeless classics or forge your own musical path.

Great care has been taken in engineering the 2600, including the true-to-the-original analog circuitry, semi-modular architecture and triple VCO designs that come together to recreate classic tones that are evocative of classic electronic music. This highly focused attention to detail is what gives the 2600 its ultra-flexible sound shaping capability. It gives you the ability to cover a lot of amazing tones from super-fat bass, tasty leads - all the way to full on dreamy ambience from the far reaches of your imagination.

Specification

Input
VCO 1 / 2 / 3
Frequency modulation (FM) control
11 x 3.5 mm TS jacks, CV range: -10 V to +10 V

Pulse width modulation (PWM)
2 x 3.5 mm TS jack, CV range: -5 V to +5 V, 1 V/10%

VCF
Audio
5 x 3.5 mm TS jacks, 50 kO unbalanced

Control
3 x 3.5 mm TS jacks, CV range: -10 V to +10 V

ADSR / AR envelope generator
S&H clock
1 x 3.5 mm TS jack, threshold: > 6 V

Gate in
1 x 3.5 mm TS jack, threshold: +4 V

Trig in
1 x 3.5 mm TS jack, threshold: +5 V

VCA
Audio
2 x 3.5 mm TS jacks, 50 kO unbalanced

Control (linear
1 x 3.5 mm TS jack, CV range: -10 V to +10 V

Control (exponential)
1 x 3.5 mm TS jack, CV range: -10 V to +10 V

Mixer / Reverb
Audio
2 x 3.5 mm TS jacks, 50 kO unbalanced

Left / right inputs
2 x 3.5 mm TS jacks, 50 kO unbalanced

LFO
Ext vib in
1 x 3.5 mm TS jack, 50 kO unbalanced
Read more
coming soon $571.70
FORTHCOMING
Korg SQ-64 Compact Polyphonic Step Sequencer
Cat: 799331 Rel: 28 Feb 21
 
Powerful & compact polyhphonic step sequencer
Notes: A new generation in hardware sequencing.

Create - perform - control- Step up to an unparalleled level of connectivity and control.

The SQ-64 is an incredibly powerful and compact Polyphonic Step Sequencer with amazing hands-on intuitive controls and deep editing options to give you all the flexibility and sequencing power needed for all your musical projects.

With its 64 step pad Matrix, Crystal clear OLED display, sturdy and elegant aluminium body, a wealth of connections and a variety of modes and features, the SQ-64 will become the central piece of your music studio providing total and seamless control over all your instruments so you can focus on what matters most; your music!

Despite its compact size, the SQ-64 has unparalleled connectivity and will allow you to easily control, connect and make the most of all your analog and digital gear. MIDI IN (x1) and OUT (x2), micro USB type B, Sync IN & OUT, 3 Melody tracks each with MODULATION, PITCH and GATE outputs and a DRUM track with 8 individual trigger outputs for controlling analog synths, Eurorack, and drum machines.

Each of the Melody tracks (x3) has 16 Patterns of up to 64 steps each, and the Drum track (x1) has 16 Subtracks also with up to 64 steps each, that can be played, chained and edited in a variety of ways. Melody tracks and patterns can be edited in several modes (GATE, PITCH and MODULATION) so you can alter the information sent by your sequencer on each of these steps in many interesting ways. The DRUM track outputs can be fine-tuned to match the polarity and voltage of your connected device(s).

Its audio Sync In & Out connections will allow you to seamlessly control all your other KORG gear such as the volca synthesizer series, minilogue, monologue, minilogue xd, prologue and many others!

Whether you are into Analog synths, Eurorack semi-modular synths, Digital drum machines, or do everything on your DAW with digital plugins, the SQ-64 will give you instant and precise hands-on control of each and all of these.

The SQ-64 has 64 beautifully LED-lit Step button pads that not only let you see the whole picture at once, but also allow for super-fast and satisfactory editing with its encoder knobs and dedicated mode buttons that will simplify and speed up your workflow. Each step has graduated lighting; the higher the modulation value, the stronger the button lights up to give you a clear visual on what's going on in the sequence.

The OLED Display is crystal clear, bright and visible from any angle, so you can have access to all the information you need no matter whether you are making music at home, in the studio or playing live!

The 3 melody tracks include a MODULATION output, so every step on your sequence can be creating complex modulations on your gear of choice, greatly expanding your options and possibilities for sound creation.

It has never been easier to create polyphonic chords patterns, melodies, complex poly-rhythms and modulations on the fly and record them as data on each of the 64 project slots available.

The SQ-64 won't just allow you to create incredible sequences; it packs several features and modes that will let you edit on the fly and play any of your gear real-time.

The 64 pad Matrix can be also be used as a Keyboard, allowing for several layouts to be used for maximum flexibility (several scales can be assigned to any of these and a number of other parameters can be easily changed)

Keys: Your traditional piano layout.
Isomorphic: the notes are displayed symmetrically in rows, you can easily transpose the same chord pattern up and down without changing its shape
Octaves: one scale displayed in 3 different octaves on each row

Sequencer: 64 step sequencer with 3 melodic tracks with up to 8 note polyphony, and 16 monophonic rhythmic tracks

Tempo: BPM30.0 - 300.0

Inputs: MIDI IN connector (3.5mm stereo mini-phone jack, use a type-A MIDI converter cable), SYNC IN jack (3.5mm monaural mini-phone jack, 20V maximum input level)

Outputs: MIDI OUT1, 2 connector (3.5mm stereo mini-phone jack, use a type-A MIDI converter cable), SYNC OUT jack (3.5mm monaural mini-phone jack, 10V maximum input level), CV GATE output A/B/C jack (3.5mm monaural mini-phone jack, 10V maximum output level), CV PITCH output A/B/C jack (3.5mm monaural mini-phone jack, 10V maximum output level), CV MOD output A/B/C jack (3.5mm monaural mini-phone jack, 10V maximum output level), TRIG output 1~8 jack (?3.5mm monaural mini-phone jack, 10V maximum output level)

Power: USB bus power, or DC 9V AC Adapter ([- o +], separately sold)

Dimensions (W x D x H): 368 x 144 x74 mm / 14.49 x 5.67 x 2.91 inches

Weight: 1.0 kg / 2.20 lbs

Included items: Owner's Manual, USB cable

Accessories (separately sold): KA350 AC Adaptor, Patch cables MS-CABLE-18
Read more
MRP:$369.09 SAVE 17%
coming soon $307.58
FORTHCOMING
Soma Laboratory Ornament-8 Organismic Sequencer
Cat: 796815 Rel: 31 Jan 21
 
Organismic sequencer module
Notes: ORNAMENT-8 is an organismic sequencer, or in a broader sense, a synthesizer of behaviour. A unique feature of ORNAMENT is its fully horizontal modular structure that consists of eight equal and independent cells which are special delay lines. It's in fact an analog computer with a temporal dimension, the behaviour of which is determined by patching and adjusting the temporal properties of each cell involved in the generation of the behaviour.

ORNAMENT can be controlled via Eurorack-compatible Control Voltage. The output of ORNAMENT is also standard CV signals that can control LYRA-8, PULSAR-23, Eurorack systems and any equipment that can receive CV, including non-audio ones such as lighting setups or electromechanical installations. For controlling LYRA-8 we developed a special adapter for easy connection to the LYRA sensors while also preserving the ability to play it normally with your fingers.

The adapter attaches to LYRA's surface using magnets which make installation easy and safe. ORNAMENT, as an organismic sequencer, complements LYRA's organismic synthesis nature, making them a perfect pair.

ORNAMENT-8 is based on a completely new principle of synthesis of behaviour. Instead of a vertical structure with a tempo generator on top and some memory for storing sequenced events, Soma Laboratory have have a dynamic equilibrium inside a horizontal structure without any memory, just an infinite "now" that generates the next moment of behaviour. In certain key aspects, it resembles a neural network where there is no difference between "processor" and "memory", where functions are blurred and all structures are very flexible. Because the ORNAMENT is fully modular, you can connect any number of ORNAMENTs into a single network, creating very complex multi-dimensional structures with the same complex behaviour. For those with philosophical inclinations, ORNAMENT is a playground the size of a box of chocolates where you can study fundamental laws of life and society, going beyond linear logical thinking.

ORNAMENT-8 was designed by Vadim Minkin, the new creative mind who recently joined SOMA laboratory. ORNAMENT is intended to be the first in a line of SOMA sequencers developing new principles of behaviour generation and control.

SPECIFICATIONS:

Number of cells: 8
Number of pulse converters: 4
Number of 3.5 mm mini-jack Eurorack adapters: 8
Number of contacts (inputs and outputs): 78
Input and output voltage range : 0-10 volts
Minimum cell delay time: 50 ms
Maximum cell delay time: 50 seconds
Maximum cell delay time at> Cv = 0 volts 5 minutes
Supply voltage: 12 volt center-plus
Current Consumption: 10-50 ma
Dimensions: 266 x 255 x 54 mm
Weight: 1.4 kg

As with any analog device, there may be a small variance in actual values.

Included:
ORNAMENT-8 i 1 pc.
Power supply 12v 1a i 1 pc.
Male-male power cord i 1 pc.
65 cm cable with alligator clips i 12 pcs.
30 cm cable with alligator clips i 14 pcs.
Read more
coming soon TBA
FORTHCOMING
Malekko Varigate 4+ Module (black faceplate)
Cat: 766093
 
Sequencer module
Notes: The Varigate 4+ is a 4-channel, 8-step sequencer that includes most features of the original Varigate 4, PLUS the new option to output both CV (quantized or unquantized) and gates simultaneously. Other new features include a Play/Stop function, Preset Banks (4×4), Glide Per Step, Scales and can also be configured as master for the Malekko Voltage Block as well as a slave to the Varigate 8+ if you're looking to expand your total channels and presets (up to 14 channels and 100 presets with V8+).

Each Channel (or Track) correlates with it's own sequencer (so 4 independent sequencers). The addition of the Gate/CV Switch allows for switching between 4 channels of CV, 2/2 for 2 channels of CV and 2 channels of gates, or all 4 channels to output only gates. Additionally, each step of a sequencer can be programmed with Probability for gates, Repeats, Glide and Notes (when in a CV mode). There is a also a Randomization feature for Repeats, Notes and Glide. Channel parameters for Scales, Sequence Direction (Forward, Reverse, Pendulum and Random), Sequence Length, Division, Multiplication and Pulsewidth are all easily accessible using Track Mode.

Easy Preset Recall makes the Varigate 4+ perfect for live performance. Pair it with the Malekko Voltage Block for maximum control.
Read more
MRP:$349.89 SAVE 17%
coming soon $291.57
FORTHCOMING
Behringer 110 VCO/VCF/VCA Module
Cat: 799848
 
VCO/VCF/VCA Module
Notes: Legendary Analog VCO/VCF/VCA Module for Eurorack

The 80s was the golden age of electronic music. Synthesizers were at their prime and almost every hit song and movie soundtrack at that time had a synth in one form or another. Modular synths have become more and more popular with professionals and enthusiasts over the years and they're about to get even better.

This is the Behringer System 100 110 VCO/VCF/VCA Module. An authentic reproduction of the original "System 100M" circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 110 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun!

The 110 comes with a complete synth voice with an internally patched signal flow for ease of use and to save patching time so you can focus on your music. You can vary the VCO section by selecting one of three waveforms; triangle, ramp and Pulse Width Modulation which can be adjusted by the Mod Manual knob. The VCO also offers pitch and range control knobs as well as one audio output, which can be routed to another source, and two CV inputs.

The VCF features cutoff frequency and resonance sliders while the VCA comes with two audio outputs (low/high). Both the VCF and VCA each feature two audio inputs and two CV inputs that allow for other sources to be plugged into the 110, making it a must-have in any modular synth.

Installing the 110 VCO/VCF/VCA is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 110 VCO/VCF/VCA to be mixed with other synth modules for a truly unique set up.

Whether you're just getting into modular synths or looking to complete your collection, the 110 VCO/VCF/VCA module from Behringer is a great tool to have when creating amazing music.

Specification:

Inputs
Pulse width mod
Type
3.5 mm TS jack, DC coupled

Impedance
>70 kO, unbalanced

Maximum input level
0 V to +10 V, 4% per volt

Signal input
Type
Impedance
>50 kO, unbalanced

Max input level
+17 dBu @ unity gain

VCO mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, 1 V/oct

VCF mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, 1 V/oct

VCA mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, typically 1 V per 10 dB

Outputs
VCO output
Type
3.5 mm TS jack, DC coupled

Impedance
1 kO, unbalanced

Max output level
10 V p-p

Frequency range with no external CV
<10 Hz to 500 Hz

Frequency range using external CV
<1 Hz to 30 kHz

VCA output
Type
2 x 3.5 mm TS jacks, AC coupled

High impedance
1 kO, unbalanced

Low impedance
3 kO, unbalanced

High max output leve
+18 dBu

Low max output level
-2 dBu

High output noise
<-60 dBu, 22 Hz -22 kHz

Low output noise
<-80 dBu, 22 Hz -22 kHz

Controls
Pulse width manua
50% to min

Waveform
Triangle, sawtooth, pulse

Range
32', 16', 8', 4', 2'

Pitch
2 octave range

Cutoff frequency
20 Hz to 20 kHz

Resonance
Off to self oscillation

Sig in level
-8 to unity gain

Mod in level
-8 to unity gain

VCA initial gain
Power
Power supply
Eurorack

Current draw
80 mA (+12 V), 50 mA (-12 V)

Physical
Dimensions
81 x 129 x 46 mm (3.2 x 5.1 x 1.8")

Rack units
16 HP

Weight
0.19 kg (0.42 lbs)
Read more
coming soon $96.03
FORTHCOMING
Hexinverter Mindphaser Next Gen Analog Complex Oscillator Module
Cat: 689801 Rel: 28 Feb 21
 
Analog complex oscillator module
Notes: The CARRIER in Mindphaser is the oscillator core that feeds the WAVESHAPER and TZ-PM BUS sections responsible for the final complex signal OUT. Switchable external hard and soft sync are offered. Over 8 octaves of VCO range are possible, perfect for FM and PM sidebands. There are V/oct, linear FM and exponential FM inputs which are all independent of the TZ-PM functionality. Linear FM happens inside the CARRIER's core, separate from the external TZ-PM BUS! Toggle the SHAPE of the signal feeding the WAVESHAPER with the button. The colour and display of Mindphaser updates as you change the base waveshape!

Built around the same analog triangle core VCO as the CARRIER, with a button press, the MODULATOR switches easily between LFO and audio range modes for maximum versatility. Besides the features it shares with the CARRIER, there is also PW modulation on the square output, which is great for a sub oscillator or MOD BUS Source.

This isn't a classic waveshaper! Featuring FOLDing harmonics up to 5 octaves above the fundamental frequency, internal FEEDBACK, and full range AM. A HIGH and LOW clipping switch offers even more harmonic experimentation! Switchable inverting attenuators on each CV input!

Thru-zero phase modulation in the ANALOG realm! Unlike its digital counterpart, analog TZ-PM has its own character we've come to expect from analog circuitry. Best of all, it can be combined with the WAVESHAPER and is independent of the CARRIER's linear FM circuitry!

This is where things get interesting- select from the PULSE, RAMP or SINE output of the MODULATOR (or inject your own SOURCE) and vary the bus INDEX manually or with CV. Control the overall INDEX here! MOD BUS send destinations include classic linear FM, AM, wavefolding, feedback and TZ-PM INDEX, with variable amounts and polarities!
Read more
coming soon TBA
FORTHCOMING
Behringer Multimode Filter/Resonator Module 1047
Cat: 799853
 
Filter/resonator synth module
Notes: Legendary 2500 Series 12dB state variable filter module for Eurorack.

This is the Behringer 2500 series MULTIMODE FILTER/RESONATOR MODULE 1047. An authentic reproduction of the original "System 2500" circuitry from the 70's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the MULTIMODE FILTER/RESONATOR MODULE 1047 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The MULTIMODE FILTER/RESONATOR MODULE 1047 is a classic voltage controlled 12 dB per octave state variable filter, the filter is a matched transistor design for a vintage sound. The 1047 filter is equipped with a coarse and fine filter frequency controls, a resonance (Q) control which acts on all 4 filter outputs, a resonance limit switch prevents signal overload when high levels of resonance are used, the notch frequency/fc control allows the notch frequency to be adjusted up or down from fc as set by the frequency controls, 2 summed frequency CV attenuators and a resonance (Q) CV attenuator for maximum flexibility, the signal input is also equipped with an attenuator. All this gives you endless possibilities of filter curve shape to create the ultimate sound.

The 1047 gives you comprehensive connectivity, filter signal input, FCV 1 and FCV 2 inputs can be used for filter frequency control or modulation, the Q CV input allows modulation of Q and resonance. The independent low-pass, high-pass, band-pass and notch filter outputs are all available simultaneously to feed multiple filter signals to other modules.

Installing the MULTIMODE FILTER/RESONATOR MODULE 1047 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows for the 1047 to be mixed with other synth modules for a truly unique set up.



Read more
coming soon $97.19
FORTHCOMING
Behringer 305 EQ/Mixer/Output Synth Module
Cat: 799850
 
EQ/mixer/output synth module
Notes: Legendary Analog Parametric EQ, Mixer and Output Module for Eurorack.

This is the Behringer System 100 305 EQ/MIXER/OUTPUT Module. A parametric EQ, mixer/oscillator and headphone amp combo that's an authentic reproduction of the original "System 100M" circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price! Mix the 305 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun!

The 305 allows for maximum tone shaping with its 4-channel EQ section complete with level, bandwidth and frequency controls that span a wide frequency spectrum from 20 Hz all the way up to 20 kHz. Using the two outputs of this section, you can then patch signals to two different modules for some extra modulation and waveform sculpting possibilities and even switch between EQ'd and Bypass modes for a quick comparison.

For added mixing capabilities, you can use the 305's 4-input mixer with individual pan and level controls. The output signal can be in either mono or stereo via 3.5mm and 14" jacks. Monitor your overall signal though the independent headphone output and its included level control.

Installing the 305 EQ/MIXER/OUTPUT is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 305 EQ/MIXER/OUTPUT to be mixed with other synth modules for a truly unique set up.




Read more
coming soon $96.03
FORTHCOMING
Qu Bit Cascade Ratcheting Envelope Generator Module
Cat: 766031
 
envelope generator module
Notes: Cascade is a ratcheting envelope generator featuring burst generation, a flexible curve parameter, and two discrete level controls. Freeze allows you to lock the output voltage exactly where it is with the press of a button or a gate input. The Cascade can be transformed into several other modes, including ASR, ADSR, dual AD, and a gravity-based bouncy-ball mode.
Read more
MRP:$273.05 SAVE 17%
coming soon $227.54
FORTHCOMING
ARP 2600M Limited Edition Version Synthesiser Module
Cat: 810345 Rel: 30 Apr 21
 
Downsized remake of Arp 2600 FS semi-modular synthesiser
Notes: The ARP 2600 is arguably the most iconic and recognizable synthesizer of all time. Having been used in countless records, film scores, TV shows and game soundtracks since its appearance from the 70's through to today, the ARP 2600's sound remains an essential part of the music world.

The new ARP 2600 M delivers the sound admired around the world, in a more compact and portable format and including added features that make it the ideal incarnation of this historic synth.

When the ARP 2600 FS was announced in January 2020, it quickly became a phenomenal success with musicians all over the world recognizing the faithfulness to the original ARP 2600.

The ARP 2600 M is around 60% the original size, making it lighter, more portable and easier to place and use in a studio. It integrates the same analog circuitry and components as the ARP 2600 FS, thus faithfully reproducing the characteristic ARP sound.

The ARP 2600 M is built in Japan with the same care and extraordinary quality standard as the ARP 2600 FS, and uses the same analog components to accurately reproduce the sound and feel of the original.

The Spring Reverb has been re-engineered and adapted to the new size body to the same lush effect.

The ARP 2600 M comes with a dedicated Carry Case that not only protects your instrument, but also makes it easier to transport, thanks to its custom casters with special anti-shock damping technology.

There is also enough space to carry other gear together, like your favourite volca, SQ-64 or MIDI controller!

It is not by chance that the ARP 2600 has been so extremely popular to this day.

More than a synthesizer, the ARP 2600 M is a complete sound design studio. Even today, the ARP 2600 stands as a bridge between the individual elements of modular synthesis and the immediacy of a production / performance instrument. Included are an ample supply of oscillators, envelopes, a filter and amplifier - all of the building blocks of analog synthesis. But the ARP 2600 M goes even further, with a spring reverb tank and even a pair of built-in monitor speakers. Also present is much of the versatility of a vintage modular system, including a ring modulation, lag and voltage processors, an envelope follower, audio preamp, a clock-able switch, noise source, a sample-and-hold module, signal inverters, an auxiliary mixer, and even a set of parallel-wired/multi jacks.

The new ARP 2600 M is not only faithful to the original, it also includes an array of added features that will make it even easier to use:

Plug and play: Connect any class compliant MIDI controller such as a KORG microKeys, nanokeys or SQ-64 to one of the ARP 2600 M's USB ports (USB-A and USB-B) and automatically get full control of your instrument!

Resized: The new size makes it easier to visualize your patch and also allows you to use shorter patch cables

Filter Choice: Two types of filters from two versions of the original ARP 2600(4012 type, 4072 type)

More MIDI: 5-Pin DIN plug MIDI IN added

Modern Control: Pitch-bend, Modulation, Portamento ON/OFF and Portamento ON/OFF can be controlled through MIDI CC messages (USB/DIN MIDI)

Normalized voltage: The threshold of the trigger signal required to activate the ADSR through the S/H GATE JACK has been reduced from 10V to 5V, making it much easier to use in combination with other gear such as volcas or Eurorack modules

Tweaked Parameters: Improved Attack and Release time ratios

Easy Connections: L/R Stereo Output Jack (instead of XLR)

Speakers turn automatically off when using headphones- improved, smoother sliders

Celebrating the rebirth of this iconic synth, the first 1000 units will come with a special colour road case, as well as a KORG microKEY2-37 so you can start playing right away!

The ARP 2600 FS comes with a diverse variety of music software from Izotope including "Ozone Elements" which lets you not only create songs but also master them using AI, "Skoove" which will help you improve your keyboard playing skills, "Reason Lite" DAW software, as well as software synths from KORG and other brands.

In other words, the moment you get your hands on this synthesizer you'll have a variety of tools to help you take your music to the next level.
Read more
MRP:$2,222.80 SAVE 17%
coming soon $1,852.34
FORTHCOMING
Malekko Quad LFO Module (black faceplate)
Cat: 766096
 
LFO module
Notes: An LFO, or low frequency oscillator, sends control voltage out in the shape of a waveform. The Quad LFO available shapes include sine, ramp, saw, triangle and pulse and moves through these shapes using the SHAPE slider. You can send these 4 distinct LFOs directly out or to other modules for frequency modulation, VCA control, filter control, etc.

What makes this Quad LFO module different is that it also includes a 16 step automation sequencer for each channel, as well as autosave or expanded preset functions when used in conjunction with Varigate 4+ and Varigate 8+.

Multiple Quad LFOs can be controlled by one Varigate 8+ or Varigate 4+ on the same bus to instantly save/recall presets.

To create a sequence of automation for an LFO, select a channel and then hold the RECORD button and move the sliders for Frequency, Phase, Shape, Distort and Level and those slider movements will play back automatically as the Quad LFO cycles through the sequence. This sequencing feature allows for a multitude of dynamic possibilities for live performance and recording.

Set each LFO to trigger via one of the 4 individual gate inputs, or set channels 2 through 4 to follow channel 1 for quadrature and phase modulation. Change the direction of each channel of sequenced automation to Forward, Reverse, Pendulum or Random. Switch the playback speed and style between Fast, Slow or Tempo Sync. There are also inputs for both Clock and Reset.


Read more
MRP:$377.33 SAVE 17%
coming soon $314.44
FORTHCOMING
Modal Electronics COBALT8 8-Voice 37-Key Extended Virtual-Analogue Synthesiser
Cat: 798100 Rel: 31 Jan 21
 
8-voice 37-key virtual-analogue synthesiser
Notes: Building on the tradition of warm and punchy analogue-style synth sounds, conceived by legendary synthesisers from the past, COBALT8 unlocks the full creative potential of analogue waveforms. This powerful, inspiring instrument reinvents the aesthetics of analogue sounds and invites musicians, producers and sound designers to explore a new era of virtual-analogue synthesiser textures, far beyond the limits of its analogue forefathers.

On top of the innovative oscillator engine of COBALT8, we added a new morphable 4-Pole Ladder Filter. Combined with Modal's unparalleled modulation options, an inspiring real-time / step sequencer, the energising arpeggiator, the Premium FATAR 37-note keyboard, MPE, studio-quality effects and MODALapp integration, COBALT8 is the perfect synth for everyone who wants a versatile electronic music instrument to play vintage synth sounds and is eager to enter new sound dimensions.

Eight true polyphonic voices tempt players to lay out wide string or rich synth pad chords, while a monophonic bass or lead patch, played with 64 oscillators can shake the walls of every stadium. And with the avant-garde sound forming features, every synth enthusiast can refine his performance with sounds that no other synthesiser is able to generate.

Two independent oscillator groups with up to 4 oscillators each generate not only powerful virtual-analogue goodness, but like no other synthesiser before, 34 unique complex algorithms like Sync, Ring Modulation, Waveform Morphing, and many more are available to increase the creative options for new-generation synth sounds. Each Algorithm has a simple-to-use pair of controls selected to suit the particular algorithm or character, providing musicians the power of traditionally complex oscillator modulations or processes spontaneously.

COBALT8's newly designed, self-oscillating 4-Pole Morphable Ladder Filter with Resonance injects more warmth and bite. Switch between the four different filter modes, get creative with the Notch filter and form unusual synth textures with the Phasor. Two different characteristics allow to instil a more subtle behaviour or process the sound with sheer raw power.

Three flexible audio-rate (2 x polyphonic) LFOs can be routed to a massive amount of destinations using the modulation matrix and sync to internal or external tempo. Three dedicated envelopes for the filter, amp and modulation allow excessive control over dynamics and expression. Switchable envelope types provide greater options to tailor the envelopes for specific sound purposes. COBALT8s sophisticated 12-slot modulation matrix supports easy assignments of complex modulation routes to keep the sound evolving. Four common modulation routings are pre-set here to free up space for more exciting ideas.

The integrated 512-note Realtime / Step Sequencer with four powerful Animation Lanes invites to compose massive and complex melodic patterns. The polyphonic 64-note step sequencer mode enables easy step input for note and animation values. Multiple sequencer trigger modes coupled with the powerful onboard arpeggiator (programmable up to 32 steps) and performance features such as Chord Hold, Inversions, Transpose, Sustain Latch.

Professional keyboard players will love COBALT8's rugged steel and aluminium chassis and the premium FATAR 37-note full-size key bed. The keys support channel aftertouch and deliver smooth action to express powerful playing performances. For direct access of the parameters, COBALT8 features 29 endless knobs, 24 buttons and an X/Y joystick for pitch or modulation, and MPE support offers new ways of creative expression for sophisticated performers.

Reshape your sounds completely with the onboard stereo effects engine. COBALT8 comes with a 3-slot FX engine with in-depth FX programming. To polish the sound, a total of 11 FX algorithms add character and depth, including Chorus, Phaser, Flanger (Pos), Flanger (Neg), Tremolo, LoFi, Rotary, Stereo Delay, Ping-Pong Delay, X-Over Delay and Reverb.

Set to be played in any synth environment, COBALT8 comes with all physical connections required. Control the synth using USB, monitor with headphones or using the dedicated line outputs, sync with external gear using the full-size MIDI in and out or the 3.5 mm Sync in or outputs and take control of your sound using the built-in Sustain and Expression inputs. By poly-chaining any two COBALT8 devices, the amount of voices is easily doubled to 16 voices and 128 oscillators.

There is plenty of room to store patch, effects and sequence creations. Out of the box, 300 of the total 500 patches are filled with factory patch banks, carefully programmed by some of the most accomplished sound designers of the world. One hundred customised effects configurations and sequences can be stored as well to be applied to any sound while performing.
Read more
MRP:$795.82 SAVE 17%
coming soon $663.18
FORTHCOMING
Meng Qi Wingie Mini Synthesiser
Cat: 799800 Rel: 28 Feb 21
 
Handheld resonator mini synthesiser
Notes: The Meng Qi Wingie is a handheld resonator which can be used standalone or with Wing Pinger.

Wingie is powered by a USB Type-C port. It can be easily powered by a power bank to play anywhere. A built in USB-Serial chip makes it easy to upload new firmwares.

With stereo on-board microphones and dual headphone-ready outputs, it is be ideal for handheld sound exploring and songwriting.
Read more
MRP:$148.19 SAVE 17%
coming soon $123.48
FORTHCOMING
IO Instruments KALLICHORE Six Voice Digitally Controlled Oscillator Module
Cat: 795935 Rel: 31 Mar 21
 
CV modulation/MIDI/oscillator/ring modulator synth module
Notes: SIX VOICE FPGA based oscillator

Three pairs of DCOs controlled by CV&MIDI

MONO, 3 and 6 POLY VOICE mode

Internal & external SYNC, 3 RINGMODs

SINE/TRI/SAW/RAMP/PULSE WAVES

FREQ range from 0,1 Hz to 10 KHz

MIXER with AR-ENV in MIDI MODE

Modulation via 3 CV INs & DCO 4/5/6

Multiple MOD sources to one target

300 programs

TFT display & continuous potentiometer

Easy user interface for studio & live

Future features planned via SD Card update

EXPANDER for SINGLE OUTs

Width: 20 HP
Read more
coming soon $254.98
FORTHCOMING
2hp Loop Module (silver faceplate)
2hp
Cat: 766646
 
Sound looper module
Notes: Sound on sound looper with 5 minute audio buffer.

Audio specs: 48kHz, 24 bit.
Read more
MRP:$189.35 SAVE 17%
coming soon $157.79
FORTHCOMING
Verbos Electronics Harmonic Oscillator Module
Cat: 805656 Rel: 31 Mar 21
 
Harmonic oscillator module
Notes: For the first time in Eurorack, this oscillator module provides outputs for the first 8 harmonics as sine waves. Also included are triangle, saw, square waves.

A voltage controlled mixer with various methods of address allows the user to scan, tilt and mix the harmonics from both panel and external voltage control. It is built on a discrete, all analog triangle core with an old school discrete transistor exponential converter. It has inputs for linear and exponential FM, the exponential with a reversing attenuator. Of course there's a 1 volt/octave trimmed CV input as well.

Power consumption: 120mA at +12 V and 90mA at -12 V

HP : 32
Read more
MRP:$863.05 SAVE 19%
coming soon $700.91
FORTHCOMING
Arturia Minilab MKII Inverted Edition 25-Key MIDI Controller Keyboard (limited orange edition)
Cat: 801264 Rel: 28 Feb 21
 
25-key MIDI contrloler keyboard
Notes: The ultimate small-format 25-key MIDI controller in a cool, limited edition color, with software.

MiniLab MkII Orange Edition is a portable MIDI controller keyboard that will have a huge impact on your creative output. Designed to fit in any work space, and featuring 25 slim-keys, 8 RGB pads, 16 rotary knobs, and a fantastic collection of included software like the Analog Lab Lite virtual instrument, this iconic little MIDI controller now comes in a striking new orange color.

Small enough to fit in your laptop bag, MiniLab MkII can follow you on your creative journey, whatever roads it may take you down. Pull up your project and drop some beats in an instant. Lay down some ideas on the train. Control your DAW and mix in your hotel room. Coupling simple, ergonomic design with some of the most inspiring sounds in the industry, MiniLab MkII Orange
Edition will be with you every step of the way.

Small, solid, and packing a punch, MiniLab MkII is a robust little mobile studio solution, and the perfect accomplice for any electronic music performer or producer. Bring all your ideas together with Ableton Live Lite. Multi-track your performances, add effects, warp samples to fit your tempo, and create studio-quality tracks with ease.

Aside from the bold, black color, the Orange Edition also comes with a great selection of bundled software that will help you start making music straight out of the box. With Analog Lab Lite - an introduction to the sounds and synths available in Arturia V Collection - you'll be able to experience the hands-on joy of controlling some of the most iconic keyboard sounds of all time with over 500 sounds. Featuring outstanding integration with Analog Lab Lite, every dial and button is instantly mapped to the parameters of your keyboard sound. Also included, Ableton Lite Live to get your producing straight away. Get learning with the new Melodics app, also included, with 40 learning and interactive exercises.

Included Software:
Arturia Analog Lab Lite
Ableton Live Lite
UVI Grand Piano Model D
Melodics learning app with 40 exercises
Arturia MIDI Control Center

Dimensions:
Product size: 355 x 220 x 50 mm / 13.98 x 8.66 x 1.97 inches
Net weight: 1.5 kg / 3.3 lbs

Gift Box size: 425 x 265 x 80 mm / 16.7 x 10.4 x 3.1 inches Gift Box weight: 1.9 kg / 4.2 lbs Master Pack size (5 pieces): 440 x 425 x 295 mm
Read more
MRP:$122.12 SAVE 17%
coming soon $101.77
FORTHCOMING
2hp Loop Module (black faceplate)
2hp
Cat: 766647
 
Loop module
Notes: Sound on sound looper with 5 minute audio buffer.

Audio specs: 48kHz, 24 bit.
Read more
MRP:$189.35 SAVE 17%
coming soon $157.79
FORTHCOMING
Michigan Synth Works Monsoon Module (black faceplate)
Michigan Synth Works Monsoon Module (black faceplate) (dlay/digital/dual & stereo/reverb synth module)
Cat: 802204
 
Audio processor module
Notes: 12HP Clouds Clone with individual controls for each Parameter. Parasites firmware standard but others available on request.
Read more
MRP:$233.26 SAVE 20%
coming soon $187.51
FORTHCOMING
Jensen JTA-315 Dual Receive/Transmit Bluetooth Wireless Turntable3 -Speed With Stereo Speakers & Headphone Jack (black)
Cat: 797738
 
Bluetooth wireless turntable with stereo speakers
Notes: Works as a stand alone music system or stream music from your phone to the systems speakers or from the turntable to your Bluetooth enabled speakers or headphones.
Read more
coming soon $96.03
FORTHCOMING
Doepfer A-174-4V 3D Joystick Vintage Edition Module
Doepfer A-174-4V 3D Joystick Vintage Edition Module (controller/CV modulation synth module)
Cat: 805667 Rel: 31 Mar 21
 
Vintage edition of Doepfer A-174 4 joystick module
Notes: Module A-174-4 outputs three control voltages generated by a spring-loaded X/Y cross potentiometer (so-called joy stick) and a Gate signal. The control voltages for X and Y are controlled by the X and Y position of the joystick in the usual way. The third control voltage Z is controlled by the rotation of the spring-loaded joystick knob. The Gate signal is generated by a button at the center/top of the joystick knob.

For each control voltage the non-inverted signal (X, Y, Z) as well as the inverted signal with adjustable offset (-X+XO, -Y+YO, -Z+ZO) are available. The generic joystick control voltages are bipolar, i.e. they range from typ. -5V (lowest position) via 0V (center position) to typ. +5V (highest position). The "Overlap" switches can be used to add a fixed offset voltage of typ. +5V to the non-inverting output in question so that the output voltage range changes to typ. 0...+10V (rather than -5...+5V). That's necessary if e.g. a VCA has to be controlled, which requires a pure positive control voltage range. The switches are named "overlap" because they allow the overlapping of the non-inverting CV output (X, Y, Z) with the inverting output (-X+XO, -Y+YO, -Z+ZO) for crossfading applications. With the overlap switch "on" and appropriate setting of the offset control it's possible to obtain a control voltage range of 0...+10V for the non-inverting output and +10V...0V (i.e. same range but opposite direction) for the inverting output.

The offset voltages which are added to the inverting outputs can be adjusted by means of three small potentiometers. That way different kinds of control voltage ranges are possible, e.g.
-5V ... +5V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = off, Offset = 0)
0 ... +10V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = on, Offset = max)
-5V ... +5V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = off, Offset = max)
0 ... +10V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = on, Offset = 0)
On top of this the four quadrant voltages Q1, Q2, Q3 and Q4 are available. A quadrant voltage becomes positive when the joystick is positioned in the quadrant in question.
Each CV output is equipped with an LED that displays the present voltage.

Important note:
Because of the construction height of the joystick (about 7 cm) the module cannot be installed into the cases A-100P6, A-100P9, A-100PMS6, A-100PMS9 and A-100PMS12 during transportation as the depth of the case cover is not sufficient. Into the base cases A-100PB and A-100PMB as well as in all other cases without cover the module can be installed without problems. Doepfer are close to finding a solution for this problem.

HP : 12
Read more
MRP:$231.88 SAVE 17%
coming soon $192.08
FORTHCOMING
Pittsburgh Modular Lifeforms Primary Oscillator B Cascading Analogue Waveform Sculpting Oscillator Module
Cat: 810317 Rel: 30 Apr 21
 
Oscillator/waveshaper eurorack module
Notes: True analog innovation, now with a black panel! Primary Oscillator b is functionally the same as the silver Primary Oscillator, only the panel color has changed.

The Lifeforms Primary Oscillator was designed to stretch the boundaries of pure sonic sculpting. The Primary Oscillator uses unique cascading waveform processing to create increasingly complex, fully modulatable waveforms. Through the use of multiple interwoven waveshapers, a simple waveform can quickly mutate into something deeply dynamic and harmonically rich.

Custom waveshapers include a harmonic sine wave; a sine processed to add just enough harmonics to give a resonant filter something to dig into. Next, the included blade wave processor is an evolution of Pittsburgh's custom modulation circuit, creating modulatable ramp and pulse waves. The fragments generator is an analog downsampler capable of crushing waveforms to dust without ever sounding thin or cold. Also included, the timbre wave folder enables deep spectral change by repeatedly folding the waveform in on itself until the original waveform is unrecognizable.

The Primary Oscillator is not meant to be a clean oscillator that produces perfect waveforms. Controlled signal interactions and the unique set of cascading waveshapers at the heart of the Primary Oscillator allow for a uniquely musical approach to experimenting with a wide array of interesting sounds. Instead of relying only on the standard set of simple wave shapes, the Primary Oscillator builds on the basics to offer a powerful palate of infinitely variable waveforms. No other analog oscillator offers such a creative and deep set of audio processing tools.

Primary Oscillator Controls

OSCILLATOR CODE

Based around the custom dual VCA oscillator designed for the Microvolt 3900, the Primary Oscillator takes advantage of calibrated temperature stabilization paired with hard sync and both linear and exponential frequency modulation. The result is a stable saw core oscillator fine tuned for deep sonic exploration.

Frequency Knob - Frequency control sweeps from LFO through the full audio range.

Fine Tune Knob - Limited range frequency control.

FM | CV Button - Switch the destination of the FM input jack between linear FM (on) and exponential CV (off) modulation.

Harmonic Sine Button - Switch between sine wave (off) and harmonic sine wave (on). Harmonic sine wave adds a minimal number of harmonics to a sine allowing for a new set of timbres to emerge.

FM | CV Amount Trimmer - FM input attenuator control.

Pitch Input Jack - 1 volt per octave pitch tracking CV input.

FM Input Jack - Linear FM or exponential CV input jack.

Sync Input Jack - Hard sync oscillator reset input jack.

Sine Wave Output Jack - Sine wave or harmonic sine wave output jack.

Saw Wave Output Jack - Saw wave output jack.

BLADE WAVE AND PULSE WAVE CONTROLS

The blade wave is a modulatable ramp wave that produces an evolving waveform capable of stable pitch tracking. The shape of the blade wave can be controlled using the blade | pulse CV input and attenuator creating a sweeping or chorus effect on the wave. The blade | pulse shape slider manually sweeps the blade wave and pulse width.

Blade Core Wave Source Button - Select the waveform used as the core wave for the blade wave. Triangle (on) or sine (off). If sine is selected, the harmonic sine button affects the blade wave shape.

Blade|Pulse Width Shape Slider - Manual Blade wave shape and Pulse width control. This slider acts as an offset when modulation is used.

Blade|Pulse CV Amount Trimmer - Blade wave shape and Pulse width CV input attenuator.

Blade|Pulse CV Input Jack - Blade wave shape and pulse width CV input jack.

Blade Wave Output Jack - Blade wave output jack.

Pulse Wave Output Jack - Pulse wave output jack.

Module Specifications
Panel size: 12hp
Depth: 25mm
Power Usage: +12v 112mA, -12v 104mA. Does not require +5v. Reversed power polarity protection.
Read more
MRP:$297.75 SAVE 17%
coming soon $248.12
FORTHCOMING
Tangible Waves AE Modular METER Multi-Functional Module
Cat: 807713 Rel: 31 Mar 21
 
Utility eurorack module
Notes: A multi-functional module for visualizing and measuring signals.

The METER module offers following modes:

Oscilloscope (AC or DC): visualizing audio and CV signals.

Spectrum analyzer: display the frequency spectrum of the input signal

Voltmeter: check the voltage of (mainly) CV signals

Frequency meter: see the frequency of the input signal; displayed as hertz and as musical note with +/- 100 cent difference. (The frequency of the root "A" can be adjusted)

Oscillator calibration helper: Via the MIDI output, this module can be used for calibrating the oscillators in the AE modular system.
Read more
MRP:$71.35 SAVE 17%
coming soon $59.45
FORTHCOMING
Cosmotronic Cosmix Aural Enhancing Stereo Mixer Module
Cat: 803497
 
Distortion/dual & stereo/mixer/dynamics/effect/panning synth module
Notes: Cosmix is an 8-channel stereo mixer with a built in analog stereo dual band maximizer.

It has four mono channels and two stereo channels, the left inputs 5 and 7 are normalised to the right inputs 6 and 8 respectively.

The four mono channels have panning- and aux send controls.

All channels are accommodated with a dedicated mute switch for live performance.

The aux output can be routed to an external effect and the four small switches below the volume faders set whether the signal that is routed to the aux bus is pre or post fader.

The master bus can optionally be fed into the stereo Drive circuit.

This circuit is true stereo, and improves almost any sound source, with full bass and amazing spatial resolution.

It works like a dual band maximizer, with separate faders for high and low frequencies.

The analog overdrive circuit can be bypassed but we don't recommend it as it sounds great and really glues the whole mix together nicely.

The overall volume can be set with the main volume knob.

The output of the compressor feeds into a diode clipping circuit, to to create a warm saturated distortion.

By playing with the levels of each channel different clipping characteristics can be achieved.

However if you prefer to keep the output signal clean, the bypass switch allows you to bypass the circuit.

The white lines indicate the non-distorted 0dB point for each channel, when the drive circuit is active and the sliders are set to zero.

Driving a channel above the white line pushes it into more overdrive and distortion, assuming 10vpp Eurorack level.

Different tones can be created by playing around with the gain staging!

Main output is eurorack level (10vpp)
Input impedance: 100k
Output impedance: 1k

70 mA +12V
70 mA -12V
0 mA 5V
20 mm deep
Read more
coming soon $270.98
FORTHCOMING
Behringer Dual Noise/Random Voltage Generator Module 1016
Cat: 799852
 
Dual noise/random voltage generator module
Notes: Legendary 2500 series dual noise source module for Eurorack.

This is the Behringer 2500 series DUAL NOISE/RANDOM VOLTAGE MODULE 1016. An authentic reproduction of the original "System 2500" circuitry from the 70's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is a classic discrete transistor white/pink/random noise source with independent attenuators for the white/pink noise level, a white /pink selector switch with color coded LED's. The slow random voltage generator produces random CV voltages and the maximum level can be controlled via the attenuators as well as an on/off switch with LED indicators for each channel. The 2 channels are completely independent of each other for even more creative possibilities.

The 1016 gives you comprehensive connectivity, each channel has a separate white/pink noise output and separate outputs for the random voltages, the outputs are all available simultaneously to feed multiple noise and CV signals to other modules.

Installing the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows for the 1016 to be mixed with other synth modules for a truly unique set up.

Specification:

Outputs
Noise
Type
2 x 3.5 mm TS jacks, DC coupled

Impedance
1 kO, unbalanced

Max output level
i5 V

Random
Type
2 x 3.5 mm TS jacks, DC coupled

Impedance
1 kO, unbalanced

Max output level
i5 V

Controls
Noise
Attenuates noise generator output

Random
Attenuates voltage output

White/pink/of
Selects white or pink noise, or of

Random on/of
Engages or disengages voltage generator

Power
Power supply
Eurorack

Current draw
45 mA (+12 V), 15 mA (-12 V)

Physical
Dimensions
42 x 71 x 129 mm (1.7 x 2.8 x 5.1")

Rack units
14 HP

Weight
0.13 kg (0.29 lbs)

Read more
coming soon $97.19
FORTHCOMING
2hp Lunchbox 42HP Portable Eurorack Modular Powered Case
2hp
Cat: 793124
 
Portable modular case
Notes: This 42HP case comes fully powered and ready to go with a latchable lid. Whether you're in the studio, on a plane, or performing at your next modular picnic, Eurorack has never been so portable.

2HP are also selling four powerful systems packed in the new Lunchbox case:

Picnic Basket, Synth Voice, Drum Machine, and Effects Box.

These systems are sure to become the bread and butter of your creative process.

Available as a standalone case (powered/unpowered), full of modules, and as a lunchbox for your lunch!
Read more
MRP:$440.44 SAVE 24%
coming soon $336.15
FORTHCOMING
Audient iD14 MKII 10-In 6-Out High Performance USB Audio Interface With Scroll Control
Cat: 809809 Rel: 30 Apr 21
 
10-in 6-out USB audio interface
Notes: Your recordings made better.

Designed to take your recordings to the next level in every way, the iD14 (MKII) delivers professional audio performance in a compact and modern desktop package, giving you everything you need to make studio quality recordings at home.

Every iD interface features the Audient Console Mic Preamp, the same discrete circuit design found in our renowned recording console the ASP8024-HE. Designed to deliver ultra- low noise and low distortion with a touch of classic analogue warmth, iD14's two Audient mic pre's will give you the professional sound you deserve.

The Audient mic pre is a high grade hybrid discrete and op amp design that delivers a clean, accurate and detailed translation of your source.

With a noise floor 30,000 times quieter than the signal level your recordings will be captured with stunning clarity.

iD14's converters make sure you hear every nuance, every detail of your audio, enabling you to take your recordings to the next level. Offering an incredible 120dB of dynamic range you will hear your audio more accurately, make better creative decisions and experience stunning clarity directly from your desktop.

Connect and listen to your mixes through two sets of speakers with iD14's four line outputs. Alternatively use the extra line outputs to send audio to an external headphone amp for distribution to your artists.

Equipped with both a jack and mini jack connection and a powerful headphone amp capable of driving headphones up to 600Ohms, iD14 is ready to take on the most demanding recording sessions.

Designed to replicate the input stage of a classic valve amplifier, iD14's harmonically rich JFET Instrument Input is the perfect sonic foundation for your guitar or bass and amp sims.

Plan for the future with iD14's digital input. Supporting both ADAT and SPDIF, iD14 gives you the option to add up to eight extra mic pre inputs letting you expand your rig and take on larger sessions.

Keep it simple with the powerful but intuitive iD Mixer. Create and customise low latency headphone mixes, utilise the flexible monitor control or simply keep an eye on your levels - all from one easy to use app.

iD14's dedicated talkback technology enables you to use any audio source connected to your computer such as a built in or USB microphone as your talkback mic, freeing up valuable mic pres for recording.

Speed up your workflow with the iD button. Assign any of iD14's advanced monitoring features to the iD button, including DIM, CUT, Polarity Reverse, Mono Sum, Talkback or Cue Mix monitoring, and experience complete control at your fingertips.

With Audient you will be in good company as our mic pres have been used to record 1000's of hit records all over the world.

Designed to deliver true phantom power over USB, iD14 will make sure your mics get the power they need to ensure optimal sonic performance.

No need to find a power outlet as iD14 is powered directly from your computer via USB, without compromising on sound quality or performance.

Turn iD14's volume knob into a virtual scroll wheel and take control of a variety of compatible onscreen parameters. Quickly dial in settings, adjust faders or even write in automation without spending hours staring at the screen.

Engineered to survive everyday use, iD14 delivers professional quality audio in a small but durable package.

Bundled with a free suite of creative software including Cubase LE and Cubasis LE for iOS, alongside industry leading plugins and virtual instruments, you can start recording as soon as you open the box.

Specifications:

D.I / Instrument Input

RANGE: 40dB
LINEUP: 12dBu = 0dBFS
THD+N @ 0dBu: 0.1%
SNR: 100dBu A-Weighted
FREQUENCY RESPONSE - MIN GAIN i0.5dB 10Hz to 20kHz
1/4" TS JACK: Tip (Hot) & Sleeve (Shield)

Microphone preamplifier

GAIN RANGE: 58dB
LINEUP: 12dBu = 0dBFS
MIC MAX INPUT LEVEL: 12dBu
MAX INPUT LEVEL: 21dBu
INPUT IMPEDANCE (Mic): 2.8k
INPUT IMPEDANCE (Line): >8k
THD+N @ 0dBu: 0.00170%
SNR: 101dBu A-Weighted
EIN: 129dB A-Weighted
CMRR @ 1k: >75dB
CROSSTALK: >-100dB
FREQUENCY RESPONSE - MIN GAIN: i0.5dB 10Hz to 40kHz
XLR COMBI FEMALE: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4" TRS JACK: Tip (Hot), Ring (Cold) & Sleeve (Shield)

Analogue to Digital Converter:

THD+N @ -1dBFS: 0.001%
DYNAMIC RANGE: 120dB A-Weighted
CMRR: >80dB
FREQUENCY RESPONSE: i0.5dB 10Hz to 40kHz

Line Outputs (DAC):

LINEUP: 12dBu = 0dBFS
THD+N @ -1dBFS: 0.0006%
DYNAMIC RANGE: 125.5dB A-Weighted
CROSSTALK: >120dB
FREQUENCY RESPONSE: i0.1dB 10Hz to 40kHz
1/4" TRS JACK: Tip (Left), Ring (Right) & Sleeve (Shield)Line Outputs (DAC):

Headphone Outputs:

LINEUP: 18.5dBu = 0dBFS
THD+N @ -1dBFS: 0.0009%
DYNAMIC RANGE: 125.5dB A-Weighted
CROSSTALK: >116dB
FREQUENCY RESPONSE: i0.25dB 10Hz to 40kHz
Read more
MRP:$274.42 SAVE 17%
coming soon $228.67
FORTHCOMING
Michigan Synth Works Typhoon Module (black faceplate)
Michigan Synth Works Typhoon Module (black faceplate) (delay/dual & stereo/effect/pitch shifter/reverb/sampling synth module)
Cat: 802262
 
Audio processor module
Notes: 16HP Deluxe Clouds Clone with individual controls for each Parameter, VCAs for the left and right channel, additional storage so ALL extra functions are available at once.

Anodized natural aluminium or black aluminum panel.

16HP

25mm Deep

140/35 mA +12/-12V
Read more
MRP:$325.19 SAVE 31%
coming soon $222.95
FORTHCOMING
Tangible Waves AE Modular MIXCONSOLE Performance Mixer Module With CV Control
Cat: 807714 Rel: 31 Mar 21
 
Interface eurorack module
Notes: An extensible performance mixer with CV-control.

This module adds a main mixer to your AE modular system! It contains four channels; each channel has a level control, a left-right pan control and two FX send controls.

The stereo returns for the FX paths have individual level controls, and finally a master level control.

The channel levels can be controlled via CV inputs, if no CV is attached, the level knob works as usual volume control.

The inputs, FX sends/returns and master out are available as AE sockets; additionally, the FX sends/returns and master are also available as minijack sockets. FX returns are stereo (3.5 stereo minijack socket), master out is available as 2 separate mono minijack sockets and as one stereo socket.

With this module, you can integrate external effect units like guitar pedals and others into your AE modular system.
Read more
MRP:$109.77 SAVE 17%
coming soon $91.46
FORTHCOMING
2hp Pitch Module (silver faceplate)
2hp
Cat: 766651
 
Pitch module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$150.93 SAVE 17%
coming soon $125.78
FORTHCOMING
ADDAC System ADDAC112 VC Looper & Granular Sampling Module
Cat: 811085 Rel: 30 Apr 21
 
Expander/digital/sampling eurorack module
Notes: There's a long history behind the granular concept and many reinterpretations of it's core principles, this is ADDAC's take on it.

In a loose description, digital Granular refer to pieces of sound files being played at the same time with slight or completelly diferent parameters originating what is commonly refered to as granular clouds. Normally, there's a buffer size from which the granular engine snips it's pieces from and plays them according to the parameters set. This buffer size is normally small in size where grains are so small that can reach the hearing spectrum and be heard as a sort of ever changing complex wavetable, this is the principle behind granular synthesis.

In our vision we added the possibility of long buffer sizes up to 5 minutes, allowing "softer" aproaches to the granular principle using it as an effect that can generate from "accidental" effects like slight "stutters" to extreme processing and transformation of any incoming audio signal.

This module is conceptually deep but easy to grasp and operate as all controls are in it's dedicated panel, all jack inputs and outputs have it's own separate panel to allow no compromise when playing its controls.

There are three main sections in this module:
Looper Engine: The Looper is where all the Real-Time recording happens. The audio input feeds the recording buffer, multiple controls allow to record and play loops into a list so that any sample in the list can be accessed at ay time and more acting as a standard looper
Granular Engine: The Granular acts upon the buffer of whatever LOOP is selected.
Output Mix The output mix allow individual control for the Dry Input, Looper Volume and Grains Volume.
Besides these main sections there's also a simple strip down MENU mainly used to LOAD and SAVE Banks, no Menu diving guaranteed.

Audio Specs:
Audio input: Mono, 16bit 44.1Khz
Audio output: Stereo, 16bit 44.1Khz

Tech Specs:
32HP + 13HP
4.5cm deep
240mA +12V
70mA -12V
Read more
MRP:$782.10 SAVE 17%
coming soon $651.73
FORTHCOMING
Michigan Synth Works Pachinko Random Sampler Module (black faceplate)
Michigan Synth Works Pachinko Random Sampler Module (black faceplate) (random/clock generator/clock modulator/quanitzer/sequencer synth module)
Cat: 802216
 
Random sampler module
Notes: 12HP version of Marbles Random Sampler

Fully calibrated
Read more
MRP:$233.26 SAVE 20%
coming soon $187.51
FORTHCOMING
IO Instruments KALYKE Dual Function Generator Module
Cat: 795940 Rel: 31 Mar 21
 
Dual function generator module
Notes: DUAL FUNCTION GENERATOR in audio range speed

LFO section with continuous potentiometer for wide frequency range

OFFSET, PHASE SHIFT and various waveforms

Multiple OUT and negative polarity OUT

LFO modulation to ADSR

Two trigger OUTs of ADSR (AD / AR)

Four modulation INs to control ADSR and its LFO mod

ADSR with selectable curves, loop and ratched mode

Two presets for both channels

Width: 16 HP
Read more
coming soon $178.36
FORTHCOMING
Acid Rain Technology Chainsaw Digital Oscillator Module
Cat: 804567
 
Digital/dual & stereo/oscillator module
Notes: Chainsaw is a powerful digital oscillator designed to bring polyphony to your rack in a compact and playable interface. We were inspired by the super-saw; a mainstay of electronic music production, and a waveform rich with harmonics for filters and effects to chew on. Chainsaw features 3 voices of 7 waves, with individual pitch control per voice. All waves morph from super saw to super square for giant hollow basslines and more.

Details:

4hp

35mm deep

110 mA on +12V, 10 mA on -12V, 0 mA on +5V
Read more
MRP:$323.82 SAVE 17%
coming soon $269.84
FORTHCOMING
Tangible Waves AE Modular PHASER Vactrol Phaser Module With 4/8 Stages
Cat: 807731 Rel: 31 Mar 21
 
Vactrol phaser module
Notes: A vactrol phaser with 4/8 stages.

The PHASER module runs the signal through a chain of all pass filters, which brings a very distinctive sound when the filter stages are modulated. Well known is this sound by many pieces of electronic music in the 70's and 80's; especially with the SOLINA as audio source you get this unique spacey sound known from these days.

The module is available with 4 or 8 stages; more stages make the modulation more deep and intense.

The module has a low-frequency LFO onboard, an external modulation CV can be used also as modulation source.
Read more
MRP:$71.35 SAVE 17%
coming soon $59.45
FORTHCOMING
IK Multimedia UNO Synth Pro Desktop Analogue Synthesiser
Cat: 809330 Rel: 30 Apr 21
 
Analogue synthesiser with 64-step sequencer/expendade connections
Notes: UNO Synth Pro Desktop gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro Desktop can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro Desktop offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro Desktop, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro Desktop provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro Desktop offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro Desktop offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

And now, audio input allows access to the filter and FX section for external signals, in addition to the original thru-put for daisy-chaining multiple units together without using a mixer.

Dimensions:
Size (W x D x H): 25 x 14 x 5 cm, 9.84 x 5.5 x 1.96 in.
Enclosure: Plastic
Weight: 700 g, 1.54 lb
Power: USB Power

Packaging includes:
UNO Synth Pro Desktop
1x Micro USB to USB Cable
Read more
MRP:$590.00 SAVE 17%
coming soon $491.66
FORTHCOMING
Flame uMLFO MIDI Clock To Analog LFO Module
Cat: 781484
 
MIDI clock to LFO analog LFO module
Notes: The Flame uMLFO consists of 14 MIDI LFOs which are synchronized to the clock. The module also works with analog clock.

Additional analog clock and reset inputs allow to create pingable LFOs.

It is possible to adjust the frequency, waveform and phase of each LFO. 12 presets are selectable via MIDI keyboard. Thanks to Sysex it is possible to program new setups.
Read more
MRP:$233.26 SAVE 17%
coming soon $194.37
FORTHCOMING
Neutron Sound Dust Of Time Dual Stereo Oscillator Module (black faceplate)
Neutron Sound Dust Of Time Dual Stereo Oscillator Module (black faceplate) (CV modulation/digital/MIDI/oscillator/dual & stereo synth module)
Cat: 802481
 
Dual stereo oscillator module
Notes: This is a dual stereo oscillator with built in modulators and utilities based on a teensy 3.6 micro controller.

Each of the 2 oscillator pairs have a few different methods, each with separate tuning, pitch modulation, and 2 parameters that can be adjusted and modulated with stereo offset or inversion of the modulation. Some OSC modes are procedurally generated, some are wavetables, and it can play waveedit files from the SD card. some methods are oversampled, some are raw.

All modulators are at full 50KHz sample rate except chaos, which is at 3KHz.

There are 4 DAHDSR with looping modulation and virus style slope sustain.

4 (resettable to actual degrees) LFO which can go from about 17 hours to 999.999Hz.

2 chaos attractors each with x and y outs (16 types ofchaos available).

2 fusers, which take 1-3 modulators and mix, multiply or otherwise combine them.

A sub oscillator
2. "control" modulators, any of the pots, midi velocity, mod or bend, can be selected.

4 CV ins and v/oct in are available as mod sources anywhere, 2 of them are at 25KHz sample rate, 2 at 3KHz.

2 gate/trigger ins, MIDI gate, and 2 internally generated gates are combined in a matrix to 4 gate/trigger buses.

2 aux CV outs, can be any of the mod sources or t/g buses.

Specifications:
Width: 16HP
Depth: 20mm
Power Consuption: 90 mA +12/20 mA -12
Read more
MRP:$480.24 SAVE 31%
coming soon $329.29
FORTHCOMING
Korg miniKORG 700FS Limited Edition Synthesiser
Cat: 810543 Rel: 30 Apr 21
 
Reissue/update of miniKORG 700
Notes: Back To The Future: a limited edition authentic revival of the miniKORG 700.

The miniKORG 700 was KORG's first mass-produced monophonic synthesizer released in 1973 at a time when the form of synthesizers as musical instruments had not been fully established. After a lot of experimentation, the miniKORG 700 arrived bringing the world of synthesizers to a wide group of users by offering simple operations that could producing extreme changes in sound, and was championed by a strong base of admiring musicians.

The miniKORG 700FS is an authentic revival of the miniKORG 700S, (an improved version of the miniKORG 700) that was released the following year. The revised miniKORG 700FS offers added functionality such as an arpeggiator, spring reverb and aftertouch. The miniKORG 700FS is a fully-realized analog synthesizer that was developed in conjunction with the original designer, Fumio Mieda.

(Note: To avoid confusion in the following text, both the original miniKORG 700 and the miniKORG 700S are listed as "miniKORG 700" for the most part.)

Why revive the miniKORG 700 now?

The real beauty and awesomeness of the sounds produced by the miniKORG 700 could not be realized through analog modeling technology that uses computational integrated circuitry such as DSPs and other devices to model analog circuitry. And although KORG continues to produce analog synthesizers such as the prologue, the minilogue and many others, we recognize that these instruments owe their existence to the miniKORG 700.

While theoretical know how is important when designing analog circuitry, deep experience is also required to understand what the results will actually be once the circuitry is completed. Ten years have passed since the monotron, a next-generation analog product from 2010 was developed by young KORG engineers and analog enthusiasts. It took some time for the full vision of these engineers to be explored and delivered but at last we've finally arrived - at the start.

KORG's wish is for customers to experience the beauty and awesomeness of the authentic analog sound through the miniKORG 700FS designed by the KORG analog engineers under the supervision of Fumio Mieda, who designed the original circuitry, ensuring that the elements that go beyond the circuit schematics would be faithfully represented.

While the miniKORG 700 was KORG's first synthesizer, it also produced some of the fattest and most dense sounds of all of our synthesizers. The miniKORG 700FS, features oscillators with a penetrating sound and an authentic recreation of the Traveler controller, one of the key features of the miniKORG 700.

The volca keys and volca bass use the filter circuit from the miniKORG 700, because the clear and penetrating characteristics of this filter were a perfect match for products that specialize in lead and bass synth sounds with a strong presence. The miniKORG 700 sound sits easily in today's music, particularly with its lead and bass synth sounds.

The miniKORG 700 came about as a sub keyboard that players would set atop their organs (frequently used in the 1970s) to augment the organ's sound palette. Nowadays, the beautiful lead synth sound of the miniKORG 700FS works well with stage keyboards such as or electric pianos, organs and so on.

The controls on the miniKORG 700 were laid out below its keys in a row, so that players who set the instrument on top of their organ would find them easy to access. Even today, this layout is intuitive and easy to understand, with a unique look that no other instrument offers.

When the miniKORG 700 was originally released, electronic components were larger in size, limiting its functionality due to the small space inside. Thanks to changes in technology, there's now have more space to add a spring reverb effect as well as a joystick for pitch bend and modulation. The new version also features aftertouch for added expressiveness, as well as important features an arpeggiator, USB port, MIDI IN connector and a CV/GATE IN jack.

Dimensions (W x D x H): 744 x 280 x 122 mm/29.29" x 11.02" x 4.80"
Weight: 8.5 kg/18.74 lbs.
Power supply: AC adapter (DC 12V)
Power consumption: 9W
Read more
MRP:$2,440.97 SAVE 17%
coming soon $2,034.14
FORTHCOMING
Korg Modwave Wavetable Synthesiser
Korg Modwave Wavetable Synthesiser (wavetable synthesiser)
Cat: 810353 Rel: 30 Apr 21
 
Hybrid wavetable synthesiser
Notes: Synthesis powerhouse with distinctive wavetable timbres, Kaoss Physics, and Motion Sequencing 2.0.

In 1985, Korg's DW-8000 combined digital wavetables with rich analog filters to give users sounds which were impossible to create with analog oscillators. It's still a cult favorite today.

modwave builds on the DW legacy and transforms it into a modern monster synth, featuring incredibly deep wavetable oscillators, gorgeous filters, wildly flexible modulation, unmatched polyphony, comprehensive pattern sequencing, and immediately satisfying hands-on control.

modwave also introduces two unique new tools for creating dynamic motion: Kaoss Physics and Motion Sequencing 2.0. Kaoss Physics combines an x/y Kaoss pad with modulatable game physics to create a responsive, interactive controller that isibesides being powerfuli a lot of fun. Motion Sequencing 2.0 brings the organic, continuously evolving patterns of the wavestate's Wave Sequencing 2.0 into the world of motion sequencing, including multiple lanes and real-time recording.

Like Wave Sequencing 2.0 (wavestate) and altered FM (opsix), modwave's evolved wavetable synthesis delivers its own brand of completely unique sounds and a knob-per-function layout that makes customizing those sounds fast and easy. To start, there are hundreds of preset sounds empowered by this new architecture, organized by front-panel category buttons, and all instantly customizable via the four Modulation Knobs. modwave's distinctive wavetable timbres deliver aggressive basses & leads, and lush ambient pads will add a new dimension to your tracks. Those who want to dig deeper will find an endless source of discovery; you'll be finding new things in this synth for a long, long time. Save as many new sounds as you like; there's room for thousands more.

Start with over 200 wavetables, each containing up to 64 waveforms- from thousands of individual waves. Use the 30+ Modifiers to change their basic character, and the 13 Morph Types to process them in real-time. Create new hybrids from any two wavetables using the unique, realtime A/B Blend. Quick math: that's over 230 million wavetable variations out of the box, before you even add modulation. No need to stop there, though! Load your own custom wavetables in Serum or WaveEdit formats; there's room for thousands more. Or, layer wavetables with samples from the built-in, multi-gigabyte PCM library.

Each Program has two full-featured wavetable oscillators, plus a sub oscillator/noise generator and any of a dozen stereo filter types, including the aggressive MS-20, sweet Polysix, and the newly enhanced Multi Filter. Animate almost any parameter using the massively flexible modulation system, with four triggerable envelopes, five LFOs, dual mod processors and two key-track generators- plus multi-lane Motion Sequencing and Kaoss Physics.

Even with all that synthesis power, playing up to four simultaneous wavetables per voice in a single Program, the modwave still achieves 32-voice polyphony, incredible for a wavetable synth. Layer two Programs together for double the possibilities.
Read more
MRP:$856.19 SAVE 17%
coming soon $713.49
FORTHCOMING
2hp Pitch Module (black faceplate)
2hp
Cat: 766655
 
Pitch shifter module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$150.93 SAVE 17%
coming soon $125.78
FORTHCOMING
UDG Ultimate Straight USB 2.0 Type C-B Audio Cable (1.5m, orange)
UDG
Cat: 795645 Rel: 31 Jan 21
 
USB 2.0 C-B cable
MRP:$16.47 SAVE 17%
coming soon $13.71
FORTHCOMING
Tangible Waves AE Modular Knobs For AE Modules (pack of 50)
Cat: 807734 Rel: 31 Mar 21
 
Pack of 50 knobs for Tangible Waves AE Modules
Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.

As of December 2020, all AE modules will be shipped with these knobs as standard.
Read more
MRP:$13.72 SAVE 17%
coming soon $11.43
FORTHCOMING
Tangible Waves AE Modular 4TTMIX FADER Attenuator & Mixer Module
Cat: 807712 Rel: 31 Mar 21
 
Utility eurorack module
Notes: Four faders as attenuator / mixer

4ATTMIX FADER is functionally identical with the 4ATTMIX module, but the knobs are replaced by faders here, which are convenient in certain situations where more values are to be changed simultaneously.

It offers four input channels which can be level controlled / attenuated by the corresponding faders. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches below the faders. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
Read more
MRP:$50.77 SAVE 17%
coming soon $42.30
FORTHCOMING
After Later Audio Beehive Plaits 8HP Redesign Module
Cat: 805370 Rel: 01 Feb 21
 
Macro oscillator module
Notes: Functionally identical clone of the Mutable Instruments Plaits. Beehive strikes a nice balance between size, reducing 12hp down to 8hp, and playability by offering full size knobs for the four main functions. Beehive also retains the same depth of the original module at 25mm. This module uses After Later's new aluminum knobs which have a nice non-slip texture and allow for more finger space over the standard 1900H Davies knobs.
Read more
MRP:$255.21 SAVE 20%
coming soon $203.52
FORTHCOMING
Acid Rain Technology Switchblade 3 Channel Switch & Mixer Module
Acid Rain Technology Switchblade 3 Channel Switch & Mixer Module (CV modulation/mixer/switch/utility synth module)
Cat: 804573
 
3-channel switch & mixer module
Notes: Switchblade is a compact 3 channel switch and mixer. Each channel can be set to switch between or combine two channels of CV or audio with either latching or momentary operation. Each channel can be controlled with a trigger (latching) or gate (momentary) or their respective button during live performance. We designed this module to be a great companion for the trigger, gate, CV and audio sources in your rack.

Details:

4hp

30mm deep

50 mA on +12V, 10 mA on -12V, 0 mA on +5V
Read more
MRP:$142.70 SAVE 22%
coming soon $110.91
FORTHCOMING
Rides In The Storm Modules PEG Loopable ADSR & Envelope Generator Module
Cat: 805800 Rel: 01 Feb 21
 
ADSR/envelope generator module
Notes: Very exponential "snappy" course and rounded edges for a compressed "bonky" sound.

Two time zones are offered.

Rackspace: 6HP
Read more
coming soon $75.45
FORTHCOMING
Cosmotronic Delta-V Dual Amped Envelope Generator Module
Cat: 803494
 
CV modulation/envelope generator/LFO/polariser/slew limiter/utility/VCA module
Notes: Delta-V is a fully analog dual channel function generator with a dedicated VCA and cycle switch per channel.

it's a versatile and powerful tool that packs a great amount of functionality in only 10HP.

Trigger envelopes, slew incoming gates and signals or generate LFO's with control over both attack and decay.

Dedicated End Of Cycle outputs, a summed output, providing a mix of DC coupled outputs that handles both audio and cv.

The dedicated VCA for each envelope provides plenty of room for experiment and more complex patches.

The trigger input takes a trigger or gate to start an attack-decay envelope, the link switch on the front normalises trigger input 1 to trigger input 2.

Without anything patched into the VCA's input, the module produces variable cv, an envelope set by the attack, decay and shape knobs. By patching an audio signal into the VCA input, the audio output signal will be shaped according to the settings of the envelope.

An LFO patched into the VCA input, will modulate the amplitude of the envelopes.

The slew input is used to slew, round off, incoming gates or voltages.

The overall shape of the envelopes is set with the shape-, the attack- and decay knobs.

The knobs can be set to produce short, snappy or very long envelopes.

The shape knob transforms the envelope from exponential to linear to logarithmic.

There are many ways to utilise Delta-V. Challenge yourself to explore new, unconventional territories!

70 mA +12V
70 mA -12V
0 mA 5V
20 mm deep
Read more
coming soon $214.95
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (15cm, purple, pack of 5)
Cat: 801484 Rel: 28 Feb 21
 
Pack of 5 3.5mm purple patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $7.15
150/236(ページ1/5)の商品
1  2  3  4  5  »

Filter

Coming Soon: Studio Equipment
Close