安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

ホーム  Coming Soon  

Studio Equipment

Options
150/144(ページ1/3)の商品
1  2  3  »
FORTHCOMING
ADDAC System ADDAC604 Dual Filter Module (black faceplate)
Cat: 776353
 
dual filter module
Notes: While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V
Read more
MRP:$193.50
coming soon $187.25
FORTHCOMING
ADDAC System ADDAC104 VC T-Networks Module (black faceplate)
Notes: Following the ADDAC103 T-Networks, this new module is also inspired by Twin T-Networks circuits used in many lengendary drum machines. A simple 4 voice module with frequency controls for each of the voices. This new module also features CV inputs with attenuverters for each voice Frequency. Due to the specificities of the circuit, and to keep the module at a low price, these inputs are not callibrated to 1v/octave.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.
Read more
MRP:$172.28
coming soon $165.40
FORTHCOMING
EMW Noise Station Module (black faceplate)
Cat: 775430
 
noise station module
Notes: The NOISE STATION module is the definitive source of noises and filters to serve as the basis for creating percussion and noise related sounds. In its Generator section it has 7 independent noise sources with various tones and spectral distributions. In its analog Filters section there's 4 fixed filters and 2 variable filters. These filters alters the spectral distribution in many ways, allowing for the creation of very exclusive and powerful noise tones.

Eurorack (3U) form factor - 18 HP width
Power consumption: +12V [39mA] / -12V [17mA]
Weight: 195g
Depth: 50mm
Read more
MRP:$193.50 SAVE 22%
coming soon $151.89
FORTHCOMING
ADDAC System ADDAC106 T-Noiseworks Module (black faceplate)
Notes: This is the last module in Addac System's T-Networks series, a straight forward 4 voice module with frequency and decay controls for each of the voices. As the name already unveils , a noise source has been added, and 2 different circuits have been created, that explore the timbre of a t-network when used to filter noise.

There are 2 different circuits in this module, voices 1 to 3 have a pre-vca t-network filter while in voice 4 the t-networks filter applied post-vca.

At each voice input there's a switch which sets which type of input to use, this signal will be used to control an internal VCA hence why the type of setting defined here is important:
1. Trigger - Any incoming CV will be converted into a 1ms trigger as soon as it crosses it's fixed threshold.
2. Mute - This disconnects then incoming signal effectivelly muting the voice.

3. Envelopes - This can be used with CV sources as well as Gate sources and simply follows the input signal.

This incoming signal will then be processed by a slew circuit which adds a decay factor allowing the user to set the "Tail" of each voice.

Trigger mode is mostly dedicated for percussive sounds while the Envelope mode is open to any external enve- lope control and able to control noise swooshes, swirls, crackles and pops simply out of t-networks filtered noise.

Audio inputs are also welcomed to be used as a Trigger/Envelope input.

Diferences between voices:
The first 3 voices also feature a Timbre selector switch: Hat/Snare
In Snare mode all frequencies coming from the t-networks filter pass thru to the output .
In Hat mode it adds a High Pass circuit which removes the mid/bottom frequencies (characteristic of the snare strike) creating a higher spectrum output which is closer to a Hat timbre.
All of these 3 voices are also differently tuned from each other to offer more timbrical options.

Voice 4 is closer to a typical t-networks circuit but this time peculiar one where the noise is gated by the vca and then sent through the t-networks filter.

Hat and Snare are terms used very looselly here, they are timbrical references and do not in any shape or form try to effectivelly replicate the complex timbres of a real world Hat or Snare.
Read more
MRP:$172.28
coming soon $165.40
FORTHCOMING
Nux Optima Air Acoustic Simulator & IR Loader Pedal
NUX
Cat: 778748 Rel: 31 Aug 20
 
acoustic guitar simulator/IR loader pedal
Notes: The Optima Air pedal is a programmable digital modelling acoustic guitar simulator for electric players. Plug in your electric guitar and morph it into any of 15 internal acoustic guitar models at will. An Impulse Response (IR) loader enables you to capture the tone profile of your favourite acoustic guitar and store it as a model that can be played from your electric guitar. To enhance the acoustic tone, the Optima Air is furnished with a foot-switchable studio quality preamp with 3-band EQ and a digital reverb section to generate ambience. The Optima Air also has an audio streaming USB interface providing, which can be used as a recording device and the USB can be used for remote editing via software which is downloadable for PC or Mac computer. Inputs and outputs include standard jack in and out, a D.I. XLR output, send/return effects loop, headphone output and aux line input for a myriad of connection possibilities. Optima Air is the acoustic guitar in a pedal for electric players either on stage or in the studio.

Power supply: 9Vdc, 500mA, negative centre (not supplied)
Sampling format: 24-bit, 48-kHz
Internal programmes: 15 models, 9 preset patches
DI output: XLR
USB computer interface: Micro USB port

The box for this item contains :

Optima Air pedal
Read more
MRP:$198.50 SAVE 17%
coming soon $165.41
FORTHCOMING
ADDAC System ADDAC701.REV2 VCO Module (black faceplate)
Notes: This is our new VCO, we discontinued our ADDAC701 VCO a few years back and since we've been wanting to release a more stable version with better pitch tracking increasing pitch reliability further minimizing the detuning issues of analog VCO's.

For this new revision we chose to use the modern version of the CEM3340 ic from CoolAudio and add the triagle to sine circuitry of our previous VCO. This new version is extremelly stable over 7 octaves.

We also added a new Mix section which allows mixing of all waveforms controlled by 3 knobs SIN/TRI, MIX and SAW/RECT.

Tech Specs:
8HP
3.5 cm deep
60mA +12V
60mA -12V
Read more
MRP:$172.28
coming soon $166.45
FORTHCOMING
ADDAC System ADDAC703 Discrete Mixer Module (black faceplate)
Notes: Here's the second module of ADDAC System's 700's Heritage Series.

Inspired by Moog CP3 mixer, this is a totally discrete analog mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.

This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3 cm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$193.50
coming soon $187.25
FORTHCOMING
Division 6 Dual Mini Sequencer V2 Module (black faceplate)
Cat: 777964 Rel: 06 Jul 20
 
sequencer module
Notes: The Division 6 Dual Mini Sequencer gives you two handy little sequencers behind one Eurorack panel. Why would you need more than one sequencer? Why would you need mini sequencers?

More sequencers = more steps
Use one for playing notes and the other for transposing those notes
Can be used as a clock divider
Run in parallel for multiple CVs / triggers
Each one gives you the standard CV and gate out, plus an ACC out (Accent? Accessory?) Use it to open up a filter, enable a glide, trigger a drum, or whatever you can think of.

The two sequencers will run completely independently, or you can daisy-chain them using the XP IN/OUT jacks to create sequences of any length.

Each sequencer has its own internal clock to get you up and running in a hurry, but you can connect an external clock if you need greater control of tempo or want to sync with other devices.

The module stores your latest sequence even when the power has been removed (plus some other ones in v2!).

While this kit is designed to give you a Eurorack module, the PCB patterns for the jacks also have holes that will accept Johnson/Cinch-style banana jacks. There are also standoff holes on the main PCB, so you can mount them behind your own custom panel.

This module has lots of LEDs and is very shiny, but only two of them are ever on at a time which keeps it from loading down your power supply.

Inputs:
CLK IN (External clock input)
XP IN (Expansion input; Starts sequencer back at step 1. Use for daisy-chaining multiple units)

Outputs:
XP OUT (Sends pulse when sequencer goes past last step. Use for daisy-chaining multiple units)
CV OUT
GATE OUT
ACC OUT (Can be programmed on or off in each sequence step)

Power supply: +12VDC (reverse-polarity protected!).
Power supply (Optional): +15VDC
Current draw: 30ma (+12V) / 0ma (-12V) / 0ma (+5)
Width: 18HP
Depth: 0.83in / 21mm
Read more
MRP:$239.69 SAVE 19%
coming soon $193.49
FORTHCOMING
Frequency Central Stasis Leak DSP Effects Module
Cat: 782283 Rel: 25 Sep 20
MRP:$209.73 SAVE 23%
coming soon $162.28
FORTHCOMING
EMW 8-Track & 16-Step Trigger Sequencer Module (black faceplate)
Notes: The EMW TRIGGER SEQUENCER module was primarily designed to control our DIGI-DRUM modules but i t can be used in several ways and in any modular system.This module let 's you create 4 di f ferent trigger sequences that can be used to trigger 4 different drum modules, envelopes, sequencers, etc. Its external clock input opens a wide range of applications. As an example, it can be clocked by a keyboard gate signal and then trigger several envelope generators according to the programmed pat tern. It is an easy to use, and a very useful module.
Read more
MRP:$205.99 SAVE 22%
coming soon $161.26
FORTHCOMING
ADDAC System ADDAC214 VC Rotator Module (red faceplate)
Cat: 776199
 
VC rotator module
Notes: This is the VC Rotator, a stepped routing module for any type of signal (audio, cv, gate, trigger...)

Similar to a VC switcher but in this case there's the same number of inputs than outputs so, instead of 4 to 1 or 1 to 4, this module is always 4 to 4 but it can be patched for 2 to 2 and 3 to 3 step actions.

All four inputs get routed to the four outputs depending on the CV and Clock controls and are divided into 4 routing steps:
1. routes all inputs to the same number output: 1:1, 2:2, 3:3, 4:4
2. routes all inputs to an offset of 1: 2:1, 3:2, 4:3, 1:4
3. routes all inputs to an offset of 2: 3:1, 4:2, 1:3, 2:4
4. routes all inputs to an offset of 3: 4:1, 1:2, 2:3, 3:4

Direction determines if the clock input goes forward or backwards.
Going forward it can be set to 2-3 or 4 steps using the Rotate knob offset, going backwards always sync to 4 steps even if offseted by the Rotate knob.
For 2 & 3 step action input 1 is normalled to input 3 and input 2 is normalled to input 4.

Reset resets the internal clock to the first step.

Pendulum, external sequencing or any complex CV actions can be achieved using the CV input and dedicated attenuverter.

4 leds monitor which input is routed to output 1.
Read more
MRP:$172.28
coming soon $165.40
FORTHCOMING
EMW Voltage Controlled Filter MG24 Module (black faceplate)
Cat: 774633
 
voltage controlled filter module
Notes: The EMW VCF MG24 is a Moog style 24db/oct low-pass resonant filter. Its sound and response were designed to be as close to the Minimoog filter as possible. This module has a 2-CH input audio mixer with individual input level control and two modulation inputs with individual input level control. Self-oscillation is very linear and ranges from 10Hz to beyond 20KHz.
Read more
MRP:$202.24 SAVE 19%
coming soon $163.33
FORTHCOMING
Frequency Central Little Melody Generative Sequencer Module
MRP:$239.69 SAVE 17%
coming soon $199.74
FORTHCOMING
Frequency Central Cryptograf Analogue Sequencer Module
MRP:$239.69 SAVE 23%
coming soon $185.18
FORTHCOMING
SynthRotek Cosmic ECHO Squared Analogue Delay Pedal (fully assembled)
Cat: 778346 Rel: 06 Jul 20
 
delay pedal
Notes: The Cosmic ECHO Squared is an analog lofi delay that will work with just about anything you plug into it. The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. This pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Blast and Warp.

Contains PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

This big sister of the Cosmic ECHO is tailored to live guitar and keyboard performers. It has all the features of the original plus:

- Expression pedal input over Rate

- Blast and Warp are now momentary stomp switches

- Blast amount knob now accessible externally
Read more
MRP:$203.49 SAVE 19%
coming soon $165.40
FORTHCOMING
SynthRotek DS-M Analog Drum Synth Module (black faceplate) (fully assembled)
Cat: 778177 Rel: 06 Jul 20
 
analog drum synth module
Notes: The DS-M is a full featured drum synth that can emulate virtually any drum sound!

The DS-M (Drum Synth Module) is a complex, modifiable, 100% analog drum synth loosely based on the Coron DS-8 and neatly packaged into an 8hp module.
Read more
MRP:$209.73 SAVE 19%
coming soon $169.57
FORTHCOMING
EMW Distance Recorder Module (black faceplate)
Notes: Our DISTANCE RECORDER MODULE module is a based on a SHARPr Distance Sensor device, an electronic component that produces a signal proportional to the distance of an object to the sensor's frontal surface.
This sensor works based on the principle of "Optical triangulation distance sensing", a technology under the patent "US5923427 A".

The module can record and play in loop any movement made with your hand or any other object in front of the module (5 to 30cm).
It can also operate in Free Mode where it continuously generates CV as a function of the distance of your hand to the sensor.
Other features include an adjustable speed modulation, speed range selection and Sync (trigger) IN and OUT in loop mode.
Read more
MRP:$218.47 SAVE 21%
coming soon $171.66
FORTHCOMING
AION Modular 991 Filter & Attenuator Module
Cat: 780121
 
filter & attentuator module
Notes: The 991 contains 2 passive filters, one 6dB High Pass Filter and one 6dB Low Pass Fillter switchable in 6 positions. On the lower part of the module one finds an Attenuator. No power is required.

Specifications:
Depth: 30 mm
Doepfer compatible
Read more
MRP:$189.76 SAVE 19%
coming soon $152.92
FORTHCOMING
EMW VCO104 Analog Voltage Controlled Oscillator Module (black faceplate)
Notes: The EMW VCO 104 is a 100% analog voltage controlled oscillator with four waveforms: SQUARE, SAWTOOTH, TRIANGLE and SINE. Its transistorized core circuit produces very sharp and powerful analog waveforms. It has precise waveform generation, excellent stability with 1V/octave frequency tracking over five octaves. The VCO-104 from EMW is the ideal tool for a truly 'fat' analog sound generation.
Read more
MRP:$202.24 SAVE 21%
coming soon $160.21
FORTHCOMING
EMW VCO204 Analog Voltage Controlled Oscillator Module (black faceplate)
Notes: The EMW VCO 204 is an all analog voltage controlled oscillator with four waveforms (SQUARE, SAW, TRIANGLE and SINE). Its transistor core circuit guarantees a powerful sound, precise waveforms and excellent stability. The hard-sync implementation is superb and has the same sound characteristics found on the famous CEM3340 chip. It also has fine tuning control and independent inputs with level control for linear and logarithmic frequency modulation.

Eurorack (3U) form factor - 14 HP width
Power consumption: +12V [50mA] / -12V [27mA]
Connectors: 3.5mm
Weight: 179g
Depth: 50mm
Read more
MRP:$263.41 SAVE 27%
coming soon $192.47
FORTHCOMING
EMW Sequential Voltage 16 Module (black faceplate)
Notes: Eurorack (3U) form factor 18 HP width

Connectors: 3.5mm

Depth: 55mm
Read more
MRP:$212.23 SAVE 19%
coming soon $171.66
FORTHCOMING
EMW MIDI Step Sequencer Module (black faceplate)
Notes: The EMW MIDI STEP SEQUENCER module is a very straight forward 16-step MIDI sequencer that allows you to create complete pattern-based sequences very quickly. It has features such as octave control, reset, and hold inputs as well as a "Beat 1" trigger input that allows it to interface with other modules in many different ways. A pulse signal from a LFO patched into the to the "+1 OCT" input adds very interesting variations into the sequence.

Read more
MRP:$208.48 SAVE 19%
coming soon $168.53
FORTHCOMING
Keeley Caverns Delay/Reverb V2 Delay Pedal
Cat: 782331 Rel: 25 Sep 20
 
Delay/reverb pedal
Notes: The Caverns Delay Reverb V2 dual-effect pedal combines delay and reverb for the perfect end to any pedal board. It features Keeley's analog-style tape delay with modulation options. The 650ms of warm delay combine with Spring, Shimmer or Modulated Reverb. Caverns now comes with a True-Bypass or Trails option. Because of its small and compact design, the New Caverns is a perfect fit for any fly-rig or small board where you have tight space requirements. The New V2 features Keeley's most popular time-based effects, blended perfectly via a design fine-tuned for over 2 years. Simply put, it will be an amazing addition to any board.

The Reverb side of the pedal features 3 cavernous sounds:

Spring Mode - Blackface Amp style spring reverb with F Style Tremolo
Modulation Mode - Choral modulation to the reverb for a huge, cavernous space
Shimmer Mode - Reverb with emphasis on octave-up voices in the reverb trails

The Delay side of the pedal incorporates Keeley's popular Magnetic Echo circuit, which is designed to emulate analog tape delay lines. Three way switchable modulation gives you options for adding Wow and Flutter to the repeats. Perfectly voiced echoes sit well in the mix, either clean or with distortion.

The New Caverns Delay Reverb V2 builds on the old Caverns pedal by giving players a more open and logical control layout with more space between the foot switches.

Top-Mounted Jacks allow for a compact pedalboard layout.

True-Bypass or Trails option gives you the freedom to create huge caverns of sounds and lets them ring out even after you turn the pedal off. Our buffers are engineered to retain your tone and to feed your amplifier a full-strength signal.

The New Caverns Delay Reverb V2 is entirely built in the US. Keeley's veteran crew builds the most reliable and road-worthy gear.

Use 2 TRS Breakout cables for effects patching or to use the Caverns with a pro switching system.
Read more
MRP:$223.46 SAVE 17%
coming soon $186.22
FORTHCOMING
ADDAC System ADDAC307 Heart Sensing Module (black faceplate)
Cat: 776307
 
heart sensing module
Notes: Another addition to the ADDAC300's Expressive Controls Series.

Preceded by the release of the ADDAC303 Muscle Sensing module, this is the second module made to take advantage of the physical body as a control source.

This module originated from a simple idea: using one's heart beat as a control source.

Using a clip-on sensor, that can be attached to a finger or an ear lobe, the user's heart rate will be aquired by sensing the blood flow passing under the sensor. This pulse will generate a trigger and an AD envelope.

Clip-on sensor will be provided with the module.

Tech Specs:
4HP
3.5cm deep
60mA +12V
10mA -12V
Read more
MRP:$172.28
coming soon $166.45
FORTHCOMING
ADDAC System ADDAC805.VS2 VC Signal Router Module (black faceplate)
Notes: Inspired by our ADDAC701 VCO waveform mixing section, our new VC Signal Router also updates our legacy X-Fade/Panner to a stereo configuration that also allows 4 quadrant mixing.

Featuring two dedicated X-faders and a stereo VCA that can also be used as a third X-Fader. All controls have their own CV inputs and dedicated Attenuverters for precision control.

4 quadrant mixing is achieved by using the stereo Master as a X-fader between left and right channels, this way you can plug 4 audio sources and sweep/crossfade between each and any of them using the 3 x-faders. Plug any 4 sources (4 waveforms of a VCO, 4 LFOs, 4 envelopes...) and sweep through morph through or have them all mixed together.

For other configuration types Left and Right X-fader channels can be routed through the Master stereo VCA or sent directly to the outputs. A stereo Direct input can also be routed through the Master VCA or sent straight to the outputs.

The Mono Sum output always mix Left and Right outputs together allowing the possibility to use the module as a peculiar 6 channel mono mixer.

It can be used for both Audio or CV Signals.

Tech Specs:
8HP
4.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$172.28
coming soon $166.45
FORTHCOMING
EMW VC Wavetable LFO Module (black faceplate)
Notes: The EMW Wavetable LFO is a very useful module for generating complex modulation signals. It has an exclusive selection of 31 internal waveforms, ranging from simple waveforms to noises, rhythmic and asymmetrical shapes.
Read more
MRP:$198.50 SAVE 22%
coming soon $155.01
FORTHCOMING
Audio Technica ATH-M50X Limited Edition Professional Studio Monitor Headphones (purple & black)
MRP:$187.26 SAVE 17%
coming soon $156.04
FORTHCOMING
Audio Technica AT2020USB+ USB Large Diaphragm Condenser USB Microphone (chrome)
Cat: 783290 Rel: 31 Jan 21
MRP:$210.98 SAVE 17%
coming soon $175.81
FORTHCOMING
IMG Stageline MXR-40PRO Professional 4 Channel Audio Mixer With DSP Effect Unit Integrated MP3 Player & Bluetooth Receiver
Notes: Professional 4-channel audio mixer, with DSP effect unit, integrated MP3 player and Bluetooth receiver.

Input channels: 4
Number of mix/mono: 2
No. of stereo: 1
Mic input: 0.6 mV, bal. 2 x XLR
Line input: 80 mV (stereo), 1 x 6.3 mm jack L/R - 7 mV (mono), 2 x 6.3 mm jack
Aux input: 340 mV, 1 x 6.3 mm jack L/R
Master output: 760 mV, 1 x 6.3 mm jack L/R
Effect send: 9 V, 1 x 6.3 mm jack
Headphones: = 8 O, 1 x 6.3 mm jack
Frequency range: 20-20,000 Hz
THD: < 0.03%
S/N ratio: > 75 dBA
Equalizer bass: i15 dB/80 Hz
Equalizer midrange: i15 dB/2.5 kHz
Equalizer treble: i15 dB/12 kHz
Phantom power: +48 V
Power supply: ~230 V/50 Hz/15 VA
Mains voltage: ~ 230 V
Mains frequency: 50 Hz
Power consumption, operation: 15 VA
Admiss. ambient temp.: 0-40 -C
Read more
MRP:$193.50 SAVE 17%
coming soon $161.26
FORTHCOMING
IMG Stageline MXR-60PRO Professional 6 Channel Audio Mixer With DSP Effect Unit Integrated MP3 Player & Bluetooth Receiver
MRP:$218.47 SAVE 17%
coming soon $181.01
FORTHCOMING
IMG Stageline MXR-120 12 Channel Audio Mixer With DSP Effect Unit Integrated MP3 Player & Bluetooth Receiver
MRP:$223.46 SAVE 17%
coming soon $185.18
FORTHCOMING
Frequency Central Polygraf Binary Step Sequencer Module
MRP:$239.69 SAVE 23%
coming soon $185.18
FORTHCOMING
Frequency Central Chronograf Event Generator Module
MRP:$239.69 SAVE 23%
coming soon $185.18
FORTHCOMING
Flame uMLFO MIDI Clock To Analog LFO Module
Cat: 781484 Rel: 22 Sep 20
MRP:$212.23 SAVE 17%
coming soon $176.85
FORTHCOMING
Flame uMGT MIDI To Gates Or Velocity Outs Module
Cat: 781487 Rel: 22 Sep 20
MRP:$212.23 SAVE 17%
coming soon $176.85
FORTHCOMING
TC Electronic C2290-DT Delay Plug-In With Desktop Interface
Cat: 781361 Rel: 27 Jul 20
coming soon $184.31
FORTHCOMING
Old Blood Noise Haunt Fuzz Pedal
Cat: 782138 Rel: 24 Sep 20
MRP:$218.47 SAVE 17%
coming soon $182.05
FORTHCOMING
Old Blood Noise Reflector V3	 Noisemaker Chorus Pedal
MRP:$235.95 SAVE 17%
coming soon $196.62
FORTHCOMING
Old Blood Noise Mondegreen	 Weird Delay Pedal
Cat: 782153 Rel: 24 Sep 20
MRP:$235.95 SAVE 17%
coming soon $196.62
FORTHCOMING
Old Blood Noise Procession Sci Fi Reverb Pedal
MRP:$235.95 SAVE 17%
coming soon $196.62
FORTHCOMING
Analogue Systems RS-100N Lowpass Module
Cat: 777029
 
low pass filter module
Notes: This low pass filter is a very good -24dB/octave Moog filter, based on the classic Moog cascade with selected, low-noise transistors. Being the successor of the RS-100, the new "S" version features several improvements regarding stability, tracking, distortion behavoiur and also the frequency range.

Two signal inputs, resonance, manually and voltage controlled cutoff frequency. Frequency range 10Hz to 35kHz with CVs applied. The transistors used in the filter cascade are low-noise and have been selected and matched in pairs to improve the frequency response over the whole frequency range. A better stability guarantees, after a one minute heating time, that the filter can be used as a clean and well tracking sine wave oscillator.
Read more
MRP:$213.48 SAVE 12%
coming soon $187.25
FORTHCOMING
Maxon VOP-9 Vintage OD Pro Clean Booster/Overdrive Nine Series Pedal
MRP:$198.50 SAVE 17%
coming soon $165.41
FORTHCOMING
Maxon OD-820 Overdrive Pro Vintage Series Pedal
Cat: 783422 Rel: 02 Oct 20
MRP:$218.47 SAVE 17%
coming soon $182.05
FORTHCOMING
Earth Quaker Devices Hummingbird V4 Repeat Percussions Tremolo Pedal
Cat: 781684 Rel: 18 Sep 20
 
Tremolo pedal
Notes: The Hummingbird is a choppy, sawtooth tremolo modeled on the vintage "repeat percussion" unit and similar to those found in old Valco and Vox amplifiers. It is capable of producing everything from classic "50's style" shimmering tremolo to a synthy, delay-like chop that turns your signal into a burst of short pings and on through to near ring modulation speeds. Simply choosing between modes 1 (slow), 2 (mid-tempo) or 3 (fast) and adjusting the rate and depth controls will unlock a whole new world of amplitude modulation at your feet. The Rate is also expression pedal accessible to allow instant changes on the fly. Using an expression pedal opens up the possibility of true random amplitude modulation! In addition to the modulation, the Hummingbird has plenty of clean gain on-tap allowing you to either boost or cut the signal using the level control. If the Depth is turned to zero, the Hummingbird will become a JFET clean boost!

Controls:
1. Depth: This adjusts how much the oscillator affects the signal. All the way clockwise produces a full chop, all the way counterclockwise produces no chop and the Hummingbird can be used as a simple JFET booster.

2. Mode: Three way toggle switch which selects the range of the oscillator. Mode 1 is slow, Mode 2 is mid tempo and Mode 3 is fast.

3. Rate: This adjusts the speed of the oscillator. Faster clockwise, slower counterclockwise.

4. Level: Adjusts the output volume

5. Expression Jack: Use an expression pedal to adjust the rate with your foot! When an expression pedal is in use the Rate control is defeated. We recommend the Moog EP-2 expression pedal.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 10 mA
Input Impedance: 50 kO
Output Impedance: <10 kO
Read more
MRP:$205.99 SAVE 17%
coming soon $171.64
FORTHCOMING
ADDAC System ADDAC303 Muscle Sensing module (red faceplate)
Cat: 776297
 
muscle sensing module
Notes: This module introduces a totally new interaction principle for the Eurorack format, using electrodes to sense body muscles tension.

You can stick them to your arm and clench your fist, to your leg and tap your tempo, to your band bass player or drummer.

Module ships with electrodes.

Pads are reusable and replaceable.

Specs:
. Width: 4 HP
. Depth: 4 cm
. Max current: 60mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$193.50
coming soon $187.25
FORTHCOMING
SynthRotek Nandamonium Eurorack Module (black faceplate) (fully assembled)
Cat: 778290 Rel: 06 Jul 20
 
wave oscillator module
Notes: Low pulsing drones, dive bombs and high-pitched laser sounds! This drone monster has six square wave oscillators with a delay, essentially combining two 4093 NAND Synths and one Cosmic ECHO.

The Nandamonium has two SAG CV inputs. When the CV jack is patched and the switch is toggled to "CV," the NAND circuit is powered directly by the incoming voltage. Beyond controlling pitch, the incoming CV can also be used to create lofi rhythmic effects.

Dial in your drone with the Nandamonium!

Specifications:
Module width: 38HP
Module depth: 22mm
+12V current draw: 15mA
Read more
MRP:$197.25 SAVE 19%
coming soon $160.21
FORTHCOMING
SynthRotek Sequence 8 Analog 8-Step Sequencer (Eurorack version) (fully assembled)
Cat: 778310 Rel: 06 Jul 20
 
8-step sequencer module
Notes: The 'Sequence 8' analog 8-step sequencer is a traditional 8-step sequencer with some extremely handy features. It's available in 2 formats: Eurorack or 9V battery/wall wart (the kit version has a FRAC power option).
Read more
MRP:$239.69 SAVE 19%
coming soon $194.54
FORTHCOMING
AION Modular 902 Voltage Controlled Amplifier Module
Cat: 780138
 
voltage controlled amplifier module
Notes: The AION MODULAR 902 VCA is an Eurorack clone of the classic Moog Modular 902.

The 902 is a Voltage Controlled Amplifier with balanced directly coupled inputs and outputs.

The 902 VCA can be used in any circumstances a voltage controlled variation of gain is desired.
Both audio or CV sources can be modulated by this module.

Both linear and exponential gain response are avaliable.

Specifications:
Power: +12 (50mA), -12 (30mA)
Depth: 20mm
Doepfer compatible

50 mA +12V
30 mA -12V
0 mA 5V
Read more
MRP:$235.95 SAVE 19%
coming soon $190.37
FORTHCOMING
AION Modular 911 Envelope Generator Module
Cat: 780140
 
envelope generator module
Notes: The AION MODULAR 911 Envelope Generator is an Eurorack clone of the classic Moog™ Modular 911.

The 911 Envelope Generator (ADSR) generates the Control Voltage contours required for producing envelopes in conjunction with a voltage-controlled amplifier or a voltage-controlled Filter.

Attack time (T1), Decay time (T2), and Release time (T3) are all independently variable over a 2 millisecond - 10 second range, making the module suitable for very fast percussive sounds or long and evolving sounds.

The 911 Envelope Generator can be triggered by an external gate signal via the Trigger Input or manually by a push button.

Specifications:
Power: +12 (30mA), -12 (15mA)
Depth: 20mm
Doepfer compatible
Read more
MRP:$235.95 SAVE 19%
coming soon $190.37
FORTHCOMING
Hungry Robot The Lumen State Variable Overdrive Pedal
Cat: 780918 Rel: 17 Sep 20
 
Overdrive pedal
Notes: The Lumen is a State Variable FET-Based Overdrive. It marks a return to the overdrive world for Hungry Robot Pedals.

Under the hood, it contains an active State Variable Filter, a type of filter that is common place in the synth world. State Variable Filters offer more clarity and presence than standard passive tonestacks. A typical passive tonestack works by removing tonal content, a State Variable Filter works by actively amplifying frequencies that are already present in your signal. The filter is actually made up of 3 individual filters (low pass, band pass, high pass) that split the incoming signal into 3 frequency ranges and amplifies those ranges without tone loss.

While designing The Lumen, Hungry Robot challenged themselves to create an overdrive that used no diode clipping. The most common approach for an overdrive is to send an amplified signal into a clipping section where diodes chop up the waveform and distortion is create. I opted for a more natural approach of cascading FET gain stages. The distortion is created by soaking the transistors with gain. To me, this method provides a more organic, tube-like saturation than a clipping section.

And to top it all off, The Lumen also has a clean blend, allowing you to mix back in some of your clean tone. At 12 o'clock, the clean signal is near unity gain. Past 12 o'clock, it amplifies your clean signal.

Knobs:

"Drive"- Sets the gain level on the first FET stage. It is normal for the knob to crackle when turned.

"Clean" - Sets the level of the clean blend. Past 12 o'clock is boost.

"Level" - Sets the volume of the drive signal.

"H.P" - Sets the level of the high pass filter.

"B.P" - Sets the level of the band pass filter.

"L.P" - Sets the level of the low pass filter.

Switching: True-Bypass

Dimensions: 4.7" x 3.7" x 1.96"

Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$205.99 SAVE 17%
coming soon $171.64
150/144(ページ1/3)の商品
1  2  3  »

Filter

Coming Soon: Studio Equipment
Close