安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

View:
Options
150/62(ページ1/2)の商品
1  2  »
FORTHCOMING
1010 Music/MOK Waverazor Dual Oscillator Module
Cat: 740064 Rel: 31 Jul 19
coming soon TBA
FORTHCOMING
2hp Grain Granular Processor Module (black faceplate)
coming soon $144.67
FORTHCOMING
2hp Grain Granular Processor Module (silver faceplate)
2hp
Cat: 727385
 
granular processing synth module
coming soon $144.67
FORTHCOMING
2hp Sine Wave VCO Module (black faceplate)
2hp
Cat: 727389
 
Digital oscillator module with sub output & wavefolding - black
Notes: Sine is a harmonically pure VCO with two distinct outputs.

The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above the primary output's frequency.

In addition, both outputs have an internal wavefolder that adds harmonic content to the signal allowing for spectrally complex tones within a single module. Keep your tones pure (or not!) with Sine.
Read more
coming soon $144.67
FORTHCOMING
4ms Row Power 35 Power Solution For Eurorack Systems (white)
Cat: 739048 Rel: 22 Jul 19
 
Eurorack power supply module - 4HP
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
coming soon $145.71
FORTHCOMING
ACL Sinfonion Harmonic CV Processor Module
Cat: 727745
 
Innovative harmonic processor featuring 3 independent quantizers, 4-voice chord generator & arpeggiator
Notes: Over the years, you have build a big modular system, containing lots of oscillators, filters, voices and sequencers...and now you would like to play all these together without ending in a cacophony?! Sinfonion is the answer!

After a long time of development and refinement, Mathias Kettner is proud to present his creation, which could be finalised in cooperation with ACL.

The Sinfonion comprises of three independent quantizer channels, a four-note chord generator, an arpeggiator and a complex progression sequencer in one. Thanks to a vast array of buttons and knobs placed around a sharp OLED display, it is easy to use and come up with musical ideas.

The Sinfonion is meant to be the control centre of your modular system.

With a total of 8 pitch outputs, 4 gate outputs, 11 CV inputs and 9 gate inputs, it offers a large number of controls. Its plethora of buttons make it an actual instrument you can play. Furthermore, the Sinfonion features an expansion port to add modules and expand functionality in the future.

The three quantizer channels provide direct access to harmonic scale notes via dedicated buttons per channel (Root, 3rd, 5th, 7th, 9th, 11th, 13th). The buttons are made for jamming, controlling the sequences on the go. A fast processor allows quantization times below 1ms.

A chord section generates four pitch outputs, allowing to create four-voiced chords. It offers a lot of options directly accessible from the front panel. Thanks to dedicated knobs for pitch and spread, buttons for selecting the notes chord inversion and optional slew, you can get the chord you are looking for in no time.

The arpeggiator section features 8 different patterns, dedicated knobs for pitch and range, and an array of buttons for selecting the scale notes and the pattern (Up, Down, Up/Down, Down/Up, Baroque, Octaves, Brownian, Random).

All these sections are under control of the Chord Progression Sequencer. It is the brain of the Sinfonion and is operated easily thanks to the display. You can change the root, degree and mode by simply turning the according knobs. It enables the creation of 16 songs with 4 parts each, and 32 steps per part. This comprises the sequencing of chord voicings, octave switches and scale note selections.

The Sinfonion puts an unbelievable sequencing power at your fingertips! Harmony in its purest form! It will bring your music to the next level!
Read more
coming soon $858.68
FORTHCOMING
Befaco Instrument Interface V2 Module
Cat: 739918 Rel: 30 Sep 19
coming soon TBA
FORTHCOMING
Befaco Percall Module
Cat: 739916 Rel: 30 Sep 19
coming soon TBA
FORTHCOMING
Befaco VCMC Module
Befaco VCMC Module (equipment)
Cat: 739915 Rel: 30 Sep 19
coming soon TBA
FORTHCOMING
Delta Sound Labs Mobula ARP 2600 Model 4014 Ring Modulator Module
Cat: 728707
 
Ring modulator based on the ARP 2600's 4014 ring mod - 8HP
Notes: Mobula is Delta Sound Labs' faithful take on the classic ARP 2600 ring modulator model 4014. This particular processor is renowned the world over for its clean sounding ring modulation effect. Due to its unconventional circuit design, where the positive and negative parts of the signal split between two two-quadrant multipliers, it achieves what is referred to as a four quadrant multiplication.

Built with a combination of modern closely matched and discrete transistors this super skiff friendly module is faithful to all of the original features, with the single addition of independent switching of input signal DC-blocking. This module is DC-coupled; meaning it will happily process both control voltages and audio signals at the flick of a switch. The unique electronic architecture leads to both significantly increased low frequency response and superior carrier suppression when compared to traditional transformer based ring modulation designs.
Read more
coming soon $124.89
FORTHCOMING
Doepfer A-111-6 Miniature Synthesiser Voice Module
Cat: 731937
 
Complete miniature monophonic synthesiser module - 10HP
coming soon TBA
FORTHCOMING
Endorphin.es Airstreamer Envelope Generator Module
Cat: 734888 Rel: 01 Aug 19
coming soon $152.99
FORTHCOMING
Endorphin.es Godspeed VCO Module
Cat: 734884 Rel: 01 Aug 19
 
6HP VCO with auto-tuning & octave shift
Notes: The Endorphin.es Godspeed is sort of the single oscillator version of the famous Furthrrr Generator. From its big brother it takes over the digital Thru-Zero core and the legendary wavefolder. But it also has new features like a sub-oscillator output and an immensely practical autotune function.

Especially for people starting with a modular system this oscillator is highly recommended. On 6HP it delivers all the features (and more) needed for diving into the depths of West-Coast-Synthesis!
Read more
coming soon $249.79
FORTHCOMING
Endorphin.es Ground Control Performance CV & Gate Sequencer Module
coming soon $520.41
FORTHCOMING
Endorphin.es Milky Way Stereo FX Module
Cat: 734890 Rel: 01 Aug 19
coming soon $182.14
FORTHCOMING
Endorphin.es Power Module
Cat: 734891 Rel: 01 Aug 19
 
Portable 2HP power module for compact skiff cases with dual passive mults
Notes: The power module from Endorphin.es is a module for the power supply of smaller modular systems such as skiff cases up to 104 TE width. The module consumes DC power between 12 and 20 volts from an external power supply unit. Voltages of up to +1000 mA and -700 mA are output, also depending on how strong the connected power supply is. In addition, there are two passive multiples.
Read more
coming soon $115.52
FORTHCOMING
Endorphin.es Squawk Dirty To Me VCF Module
Cat: 734886 Rel: 01 Aug 19
coming soon $182.14
FORTHCOMING
Eowave Orage VCO MKII Module
Cat: 730066
coming soon $197.75
FORTHCOMING
Erica Synths Black Input Module
coming soon TBA
FORTHCOMING
Erica Synths Black Sequencer Module
Cat: 732854
 
4-channel sequencer module
coming soon TBA
FORTHCOMING
Erica Synths Black Spring Reverb Module
coming soon TBA
FORTHCOMING
Erica Synths Cowbell Module
Cat: 732855
coming soon TBA
FORTHCOMING
Erica Synths Pico BBD Bucket Brigade Device Delay Module
Cat: 732851
 
Compact bucket brigade delay module - 3HP
Notes: Pico BBD is surprisingly great sounding (we were surprised ourselves), full analogue 4092 stage bucket brigade delay module; the smallest BBD in Eurorack. Besides nice and clean flanger and delay effects, at full CW settings of TIME and feedback knobs it can produce extreme sonic artefacts. Tweak knobs and enjoy!
Read more
coming soon $138.42
FORTHCOMING
Erica Synths Pico Drum 2 Module
coming soon TBA
FORTHCOMING
Erica Synths Pico LFO/S&H Module
coming soon $95.75
FORTHCOMING
Erica Synths Pico LPG Low Pass Gate Module
Cat: 732843
 
VCA & Filter synth module
coming soon TBA
FORTHCOMING
Erica Synths Pico Mixer Module
coming soon $60.36
FORTHCOMING
Erica Synths Pico Noise Module
Cat: 732846
 
White noise generator - 3HP
Notes: Erica Pico Noise is a versatile noise and percussion sounds source. It consists of white a noise generator, a resonant VCF to generate various colours of the noise - from extremely dark ones to high pitched resonant sweeps and a VCA/decay envelope generator combination to create range of percussion sounds to emulate hi-hats, cymbals and even sine tone-based percussion, when the resonance is full up.
Read more
coming soon $133.22
FORTHCOMING
Erica Synths Pico Ring Modulator Module
Cat: 732852
 
Ring modulator with internal oscillator
Notes: Erica Pico Ring is a balanced modulator (quadrant multiplier) circuit to create bell-like, metallic or robotic sounds. It has built-in sine-wave modulation oscillator for more versatility.
Read more
coming soon TBA
FORTHCOMING
Erica Synths Pico Seq 2 Sequencer & Waveshaper Module
Cat: 732845
 
Simple 2-4 step sequencer - 3HP
Notes: Pico SEQ2 is a straight-forward, full analogue 4 step sequencer/waveshaper with adjustable sequence length. If you want to have a simple, compact stepped modulation source in your setup, then this is it! Particularly interesting use of the Pico SEQ2 is waveshaping - just apply any audio source to the CLK IN, tweak the knobs and be amazed!
Read more
coming soon $90.54
FORTHCOMING
Erica Synths Pico VC EG Voltage Controlled Envelope Generator Module
coming soon TBA
FORTHCOMING
Erica Synths Pico VCO 2 Module
Cat: 732841
 
Analogue VCO module - 3HP
Notes: Erica Synths Pico VCO2 - powerful, full analogue VCO with great tracking over 8 octaves just in 3HP! Combine two of those, add some PWM and have a sound of real analogue beast!
Read more
coming soon TBA
FORTHCOMING
Erica Synths PSU Input Module
Cat: 738521
 
4HP PSU connection module
Notes: If you decide to use rack ears to mount Erica Synths 84HP enclosure in the studio rack, you may want to access the PSU connection from the front of the case, instead of the top. The 4HP PSU connection module is the solution. PSU Input module is intended to be used with external PSUs which provide an output voltage from +9V to +12V ("+" in the centre).

For two row Eurorack enclosures (2x84HP), use a small screwdriver to disconnect the existing PSU connector from the blue terminal and connect the PSU connector module as shown on the photo.

For one row Eurorack enclosures (1x84HP), you will need a soldering iron to solder wires from the PSU connector module as shown on the photo. Make sure soldered wires do not touch the aluminium enclosure!
Read more
coming soon $18.47
FORTHCOMING
ERM Polygogo Polygonal Stereo Oscillator Synthesis Module
coming soon TBA
FORTHCOMING
Frap Tools USTA Sequencer Module
coming soon $722.33
FORTHCOMING
Future Retro Trax Performance Sequencer Module (B-STOCK)
Cat: 739110
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The TRAX is a compact 6 HP Eurorack module that manages to combine the best elements of classic sequencers mixed with some amazing new features. It offers a wide range of possibilities from traditional to the more experimental algorithmic type sequencing.

With unique new features like Evolve, once you enter a pattern or two, the TRAX is able to compare the patterns and generate numerous related patterns instantly for you to access. In addition, the Remix feature will provide 256 variations of each pattern entered.

The TRAX features a Trigger Output, 2 CV Outputs, and an Analog Clock Input that doubles as an Output when reconfigured. Combine the TRAX module with the new MIDI BUS module to control TRAX with a MIDI Clock, send TRAX MIDI Input, or even send MIDI Note Output from the TRAX!

Each Trigger and CV part have their own parameters to control playback type, direction, remix, evolve, phi, randomize, copy/paste, offset, loop steps, loop bars, and a regeneration loop point for evolve and phi modes. And our unique CV Links feature allows any or all of these parameters to be used independently, or instead follow the Rhythm part's parameter values to behave more like traditional sequencers.

A host of Global features provide playback, sync, tempo control, swing, mute, fills, rec type, independent CV output quantization to 29 different scales, MIDI, MIDI to CV conversion, and screensaver.
Read more
coming soon $162.99
FORTHCOMING
Grayscale Supercell Granular Synthesis Module (grey panel version, an expanded version of Clouds by Mutable Instruments)
Cat: 739128 Rel: 22 Jul 19
 
Expanded take on Mutable Instruments' famous Clouds granular texture synthesiser - grey faceplate, 34HP
Notes: Clouds, the granular synthesis module from Mutable Instruments, was discontinued in 2017. Supercell brings back Clouds in a more accessible 34 hp form factor, offering an improved user interface and several additional features:

- Each of the Blend parameters (Feedback, Panning, Mix, and Space) have dedicated knobs with their own CV inputs and inverting attenuators (attenuverters).

- The inputs and outputs now have mute switches, stereo VCAs, and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.

- A stereo output gain control has been added, providing an additional +6 dB of gain to compensate for low output levels when using certain parameter combinations.

- The complex process of changing the sampling time and managing presets has been simplified with dedicated switches and status LEDs.

- Extensive modulation options for all parameters including direct patching of external CV, distribution of one CV to all parameters via the AUX input, or an internal smooth random CV that is normalized to any unpatched inputs when AUX is also unpatched. The attenuverters control the modulation depth in all three cases. As of firmware v1.01 the internal modulation rate can be adjusted within a range of 1 to 100 Hz.

- The inputs and outputs now include stereo VCAs and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.

- Pitch is now controlled by two separate inputs: the V/Oct input is exponential and the Pitch input is linear. When both inputs are used, their voltages are summed.

- A manual Trig switch (for capturing individual grains) has been added, in addition to the Trig input that was present on Clouds.

All other features of the original Clouds remain intact, including access to the alternate modes. Thanks to Olivier Gillet for making the original Clouds hardware and firmware available under open-source licenses. Third-party firmware such as Parasites (by Matthias Puech) and Beat Repeat (by Julius Kammerl) will be supported in future firmware updates after the initial release of the module.
Read more
coming soon $475.65
FORTHCOMING
Intellijel Outs 3U Balanced Stereo Line & Headphone Output Module
Cat: 739049 Rel: 22 Jul 19
 
Headphone amp capable of driving high impedance headphones via a 1/4" stereo Neutrik jack
Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.
Read more
coming soon $169.65
FORTHCOMING
Intellijel Stereo Out 1U Balanced Stereo Line Output Module
Cat: 739057 Rel: 22 Jul 19
 
Two channel, +4dBu balanced line level outputs
Notes: This module has 1/8" jacks to accept either mono or stereo audio signals from your modular gear.
It features input level indicator LEDs, and contains all the gain control circuitry necessary to drive external audio gear at the proper levels.

A ribbon cable is included for connecting it to either the Stereo Out Jacks 1U module, or a compatible Intellijel case with 1/4" jacks (e.g. 7U x 104HP, 7U x 84HP, or Palette 62).
Read more
coming soon $77.01
FORTHCOMING
Intellijel Stereo Out Jacks 1U Balanced Stereo Line Output Module
Cat: 739060 Rel: 22 Jul 19
 
Dedicated jack expansion module for use with the Stereo Out 1U module
coming soon $23.93
FORTHCOMING
Intellijel Triplatt 3U Attenuator/Inverter/Attenuverter/Multiplier/Adder/Mixer & DC Voltage Source Module
Cat: 739050 Rel: 22 Jul 19
 
Three-channel active/buffered attenuverter & summing mixer
Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.
Read more
coming soon $121.77
FORTHCOMING
Koma Elektronik Sensor Interface Eurorack Module
Cat: 738506 Rel: 01 Oct 19
coming soon TBA
FORTHCOMING
Koma Elektronik Simplex 16 Step Patchable Sequencer Module
coming soon TBA
FORTHCOMING
Make Noise Mimeophon Stereo Multi Zone Colour Audio Repeater Module
coming soon TBA
FORTHCOMING
Make Noise Tape & Microsound Music Machine Stereo Skiff System
coming soon TBA
FORTHCOMING
Make Noise XOH Stereo Line Headphone Amp Module
coming soon TBA
FORTHCOMING
Noise Engineering Ataraxic Iteritas Magnus 5U Oscillator Module (15V & 1/4 inch jacks, NOT Eurorack)
coming soon $416.32
FORTHCOMING
Noise Engineering Quant Gemi Quad Octave Switch & Buffered Mult Module
coming soon $167.56
FORTHCOMING
Noise Engineering Quantus Pax Four Channel Precision Adder With Universal Transpose Inputs Module
coming soon $238.34
150/62(ページ1/2)の商品
1  2  »

Filter

Coming Soon: Studio Equipment
Close