安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

ホーム  Coming Soon  

Studio Equipment

Options
114/14(ページ1/1)の商品
FORTHCOMING
MST Stereo Output Mixer Module (fully assembled)
MST
Cat: 778059
 
stereo output module
Notes: The MST Stereo Mixer is intended for pannable stereo output, but it is also suitable for both AC & DC voltage signals (Gates, Triggers and Control Voltage).

Specifications:
Current draw: +12: 13mA, -12 9.2mA
Width: 6HP
Read more
MRP:$103.42 SAVE 20%
coming soon $83.02
FORTHCOMING
MST 4-Channel Audio / CV Mixer Module (fully assembled)
MST
Cat: 778011
 
4-channel audio/CV mixer module
Notes: The MST Audio/CV 4-Channel Mixer is a mixer and/or attenuator with mute switches per channel - a must for the performing modular artist.

Specifications:

Current draw: V+ max 13.25mA, V- max 7.35mA

Width: 8HP, Depth: 3.5 cm (1.88 in)
Read more
MRP:$145.04 SAVE 19%
coming soon $117.71
FORTHCOMING
MST Dual AD/ASR Envelope Module (fully assembled)
MST
Cat: 778041
 
dual AD/ASDR module
Notes: The MST Dual Envelope is a simple-to-use yet complex dual envelope generator. Channels 1 and 2 are both normalled to each other to cycle when the other respective channel hits end of cycle, allowing for really interesting ping-pong effects. Each channel also has an end-of-cycle trigger output with LED indicator. Thereis a normal and inverted envelope out. The inverted envelope out can be further modified by the +5 offset switch, which allows the inverted waveform to travel in the positive. The + output level allows the envelope signal to go between zero and the maximum voltage rail. Attenuate the output level down for a more subtle envelope (adjust to taste).

Specifications:
Current draw: V+ max 10mA, V- max 8mA
Width: 12HP
Read more
MRP:$272.42 SAVE 19%
coming soon $220.70
FORTHCOMING
MST Expressor Module (fully assembled)
MST
Cat: 778043
 
expressor module
Notes: The MST Expressor allows you to use expression pedals with your modular, taking a "hands-off" approach to expand your control and creativity. It has two identical powered expression pedal processing units in one handy module, allowing you to do things such as:

Control volume with your foot
Attenuate CV or audio if no expression pedal is plugged in
Add positive or negative voltage with the flick of an ankle:
Sweep a filter cutoff
Transpose CV
Pitch bend
Direct audio volume control
Attenuate and expand external CV
LFO rate adjustment
Modulation amount control
And more.

Specifications:

Current draw: 28mA on +12V; 28mA on -12V
Width: 8HP
Module depth: 24mm
Read more
MRP:$151.34 SAVE 19%
coming soon $122.95
FORTHCOMING
MST MIDI to CV Expander
MST MIDI to CV Expander (synth module)
MST
Cat: 778050
 
MIDI to CV expander module
Notes: The MST MIDI to CV Expander module is a tiny but extremely powerful expansion module for the MST MIDI to CV Converter. The Expander includes an arpeggiator and allows you to have additional CV, gate, velocity, modulation and aftertouch outputs on a separate MIDI channel. You can also set it to the same MIDI channel as the Converter and use one of the three note priority selections, which will allow you to do duophony/pseudo-polyphony. You can daisy-chain Expanders together to add even more channels.

The Expander really shines when it is used with a DAW. Multiple Expanders can be set to different MIDI channels in any sequencer (like Ableton for example), making live performance with your Eurorack simple.

The Expander connects to the MIDI to CV Converter using an I2C cable (included).

Specifications:
Current draw:
+12V: 55mA
-12V: 15mA
Module Depth: 48mm
Width: 2HP
Read more
MRP:$181.61 SAVE 19%
coming soon $147.13
FORTHCOMING
MST VC Low Pass Filter Module (fully assembled)
MST
Cat: 778062
 
low pass filter module
Notes: The MST Low Pass Filter is a precision analog dual slope output 2 & 4 pole filter. Simultaneous -12 DB and -24 DB outputs with CV control over all parameters. Can be used as a 1V/O sine wave oscillator

Specifications:

Current draw: V+ max 23.5mA, V- max 15.5mA

Width: 6HP Depth: 3.5cm (1.75 in)

Read more
MRP:$199.27 SAVE 19%
coming soon $161.85
FORTHCOMING
MST '07 Buffered Multiple Module (fully assembled)
MST
Cat: 778019
 
buffered multiple module
Notes: The MST '07 Buffered Multiple is the original buffered mult design invented by George Mattson in 2007. It's a precision mult that is perfect for 1V/O CV sources. A signal plugged into Input 1 will be available from all 14 outputs. Break the chain by adding a second signal into input 2; signal 1 comes out 4 outputs and signal 2 is available at the remaining 10. Plug in as many as 4 inputs, each split 3 or 4 times. What you put in, you get out.

Specifications:
Current draw: V+ max 42mA, V- max 42mA
Depth: 33mm
Width: 4HP
Read more
MRP:$121.08 SAVE 19%
coming soon $97.73
FORTHCOMING
MST Unity Gain Mixer Module (fully assembled)
MST
Cat: 778060
 
gain mixer module
Notes: The MST Unity Gain Mixer adds input signals together and combines them for a summed output. For example, if you put in a 1V source and a 3V source, the output will be 4V. It's mainly used for CV, but it can also be used to combine audio signals together.

A unity gain mixer is handy in several ways:
Combining gates and triggers. Plug a few sequencer steps into the unity gain inputs, then run the output to a drum synth, VCA, envelope, etc.
Re-shaping two CV sources with a single envelope.
Combining different wave shapes or LFOs to make crazy sounds.
Controlling the CV of one source with the CV of another source. Just plug the CV out of a sequencer into and an expression pedal/touchable CV out into the unity gain inputs.

Specifications:
Current draw:
+12V: 9mA
-12V: 9mA
Module Depth: 22mm
Width: 6HP
Read more
MRP:$103.42 SAVE 20%
coming soon $83.02
FORTHCOMING
MST VC LFO Module (fully assembled)
MST
Cat: 778061
 
voltage controlled LFO module
Notes: MST Voltage Controlled Low Frequency Oscillator is another tiny, useful module packed to the gills with features. Manual and CV control over rate with 3 discrete waveform outputs. A square wave can be used to clock modules such as our Noise, Sample & Hold module. Great for creating vibrato, tremolo or other classic modulation techniques. Great for frequency modulation, especially when connected to the MST analog VCO.

Specifications:

Manual range: Approx 51 Second to Approx 102 Hz
Time with Max range, +5V CV: 1,450Hz
Time with Max range, -5V CV: 1 Hz
Time with Min range, +5V CV: 2 Hz
Time with Min range, -5V CV: 1.5 Hours
Skew range, all waveforms: 14% to 86%
Current draw: V+ max 11.75mA, V- max 12.2mA
Width: 4HP, Depth: 4.77 cm (1.88 in)
Read more
MRP:$151.34 SAVE 19%
coming soon $122.95
FORTHCOMING
MST MIDI to CV Converter Module (fully assembled)
MST
Cat: 778046
 
MIDI to CV converter module
Notes: The MST MIDI to CV Converter is a translator between digital devices and analog synths, allowing you to connect your modular system to a keyboard, computer, phone or tablet.

Compatible with the following hardware:
Windows XP, 7, 8, 10
Mac OS X (any version)
Linux (tested on Ubuntu 14.04)
iPad & iPhone with a MIDI adapter (like an iRig MIDI)
Android devices (3.1 or later) with a USB OTG cable and USB A to B cable (like a USB printer cable)

Specifications:
Current draw:
+12V: 85mA
-12V: 8.5mA
Module Depth: 46mm
Width: 6HP
Read more
MRP:$242.15 SAVE 19%
coming soon $195.47
FORTHCOMING
MST Dual 2164 VCA Module (fully assembed)
MST
Cat: 778038
 
VCA module
Notes: The MST Dual 2164 VCA is a precision AC (audio) & DC (gate triggers or control voltage) Voltage Controlled Amplifier in 6HP. Each channel has a linear or exponential response switch, the exponential resulting in a ipoppierî response. Adjustable output level and bleed if you want to mix in your unaffected source audio. Butters your toast all the way to the edge.

Specifications:

Current draw: V+ max 20mA, V- max 17.5mA

Width: 6HP Depth: 3.5 cm (1.75 in)

Read more
MRP:$169.00 SAVE 19%
coming soon $137.67
FORTHCOMING
MST VCO Voltage Controlled Oscillator Module (fully assembled)
Notes: The MST VCO is a 100% analog 6-octave 1V/O trackable precision oscillator with full pulse width and modulation controls and with 5 waveform outputs.

Specifications:
Current draw: 45.9mA on +12V; 46.3mA on -12V
Width: 10HP
Module depth: 1 7/16 inches (3.7 cm)
Read more
MRP:$290.08 SAVE 19%
coming soon $235.42
FORTHCOMING
MST Noise/Sample & Hold/Track & Hold Module (fully assembled)
MST
Cat: 778056
 
noise/sample & hold/track & hodl module
Notes: The MST Noise/ Sample & Hold / Track & Hold Module supplies you with all the noise and random goodness you need in one small 4HP package. White, pink, and slow-random noise are just a patch away. The white noise is normalled to the signal input or input your signal of choice and break the normalled connection. To activate either the S&H or T&H, just supply the module with your clock source to start generating stepped random control voltages.
Read more
MRP:$151.34 SAVE 19%
coming soon $122.95
FORTHCOMING
MST Ribbon Controller Module (fully assembled)
MST
Cat: 778058
 
controller module
Notes: The MST Ribbon module brings control to a whole new surface and fills out an already generous selection of modules designed by George Mattson. The Ribbon module pairs with Synthrotek's Ribbon Controller Touch Interface modules that are available in various lengths in both 3U and 1U formats. Control Voltage, Gate and Pulse outputs allow for mega control over pitch, modulation, quantization, volume and more! Also connect your external signal into the EXT SIG IN jack to bypass the modules on-board voltage for passive external attenuation.

Current Draw:
+12v: 8mA
-12v: 15mA
+5v: N/A

Comes With:
Keyed Power Cable.
2.5mm and 3mm rack screws.
Super cool sticker.

Read more
MRP:$78.19 SAVE 18%
coming soon $64.11
114/14(ページ1/1)の商品

Filter

Coming Soon: Studio Equipment
Close