安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back In Stock: All Genres

ホーム  Back In Stock  All Genres  

14 days

Options
18/8(ページ1/1)の商品
WMD Geiger Counter Pro Bitcrusher Distortion Pedal
Cat: 677512 Rel: 26 Feb 18
 
Waveshaping distortion workstation
Notes: All of the features of the original Geiger Counter, with so much more. 16 footswitchable presets, MIDI control over presets, bit depth and sample rate blending, dry/wet mix, an end of signal filter - the most powerful pedal WMD have ever created. Designed for the pro to really dial in new, undiscovered sounds, never before heard in a distortion pedal.
Read more
MRP:$544.48 SAVE 23%
 2 in stock $418.74
Click for better price!
or call +44 20 7424 1960
quote 677512
Meris Mercury7 Algorithmic DSP Reverb Pedal
Cat: 781879 Rel: 15 Jul 20
 
Reverb pedal
Notes: Inspired by Vangelis' majestic soundtrack for the sci-fi masterpiece Blade Runner, Mercury7 is designed to send both humans and androids into an eternal dream state with its wealth of stunning reverb algorithms.

From subtle plates and huge cathedrals to massive building soundscapes, swirling modulation, epic auto-swells and cascading shimmering pads. Whether you're looking to capture the sound and feel of well-known earthly spaces, or that of huge starlit galaxies far away, the Mercury7 is sure to deliver!

Meris has left no stone unturned in their journey to bring ultra-advanced studio reverb capabilities to your pedalboard. The Mercury7 takes everything that made the original and highly regarded Mercury7 500-series studio rack-unit amazing and distils it all into a compact, sturdy and super intuitive pedal fit for any rig and instrument out there.

Mercury7 sports two different reverb algorithms (Ultraplate and Cathedra), which alone deliver a superb range of ambient tones. Now throw in the ability to modulate, pitch-shift, swell, sustain and EQ the reverb in a million different ways via its rich control set and ALT functions and you have a reverb pedal that has your back whether you're going for smooth on-stage ambience or otherworldly sound designs that could easily form the backdrop to your favourite movie.

In addition, Mercury7 holds one of the most impressive stereo reverb images ever made, vast MIDI capabilities and the ability to seamlessly morph between sounds via an external expression pedal. Mercury7 is in essence way more than just another reverb pedal. It's a deep and highly musical creative instrument in its own right.

Premium quality 24 bit A/D and D/A

32 Bit floating point DSP hardware

-115 dB Signal to Noise Ratio (typical)

Premium low noise Analog signal path throughout

Auto Swell Envelope (variable and foot-switchable)

Analog Devices JFET input circuitry

Wet/Dry signal mix occurs in the Analog domain

Selectable True Bypass (Relay) or Analog Buffered Bypass

Durable transparent blue powder coat over brushed aluminum

Current draw < 150 mA

Dimensions - 4.25" wide, 4.5" long, 2" tall
Read more
MRP:$392.29 SAVE 17%
 1 in stock $326.91
Electro Harmonix CNTL Knob Static Expression Pedal
Cat: 784229 Rel: 22 Jul 20
 
Static expression pedal
Notes: The Cntl Knob is an affordable, compact, easy-to-use pedal that delivers static remote control for devices with expression control jacks. It lets you set two preset values that represent two positions of a traditional expression pedal and toggle between them with its footswitch.

The pedal's EXP 1 Knob selects the first expression setting and the EXP 2 Knob the second. On both, fully CCW corresponds to the heel position while fully CW to the toe position. LEDs indicate which knob is active and can be powered by your pedalboard's power supply or an optional EHX's 9.6DC200mA PSU.

To maximize the Cntl Knob's compatibility with other products it's equipped with a TRS+/- Button that lets you match its expression polarity with the device being controlled. For extra convenience it comes equipped with a 6 foot TRS (Tip-Ring-Sleeve) cable.

Electro-Harmonix introduces the compact Cntl Knob which lets a player set two preset values that represent two positions of a traditional expression pedal and toggle between them with its footswitch.

The Cntl Knob's EXP 1 Knob selects the first expression setting and the EXP 2 Knob the second. On both, fully CCW corresponds to the heel position while fully CW to the toe position. A TRS+/- Button matches the expression polarity of the Cntl Knob to the product being controlled and ensures maximum compatibility with pedals by all makers. LEDs indicate which knob is active and can be powered by a player's pedalboard power supply or an optional EHX's 9.6DC200mA PSU.

The Cntl Knob (Control Knob) comes equipped with a 6 foot TRS (Tip-Ring-Sleeve) cable.

Read more
MRP:$47.23 SAVE 17%
 1 in stock $39.36
Earth Quaker Devices Acapulco Gold V2 Power Amp Distortion Pedal
Cat: 781143 Rel: 14 Jul 20
 
Distortion pedal
Notes: The Acapulco Gold is a dirt-simple distortion Device modeled after the sound of a cranked vintage Model T amplifier, bringing the openness, clarity, and crunch that only a dimed tube amp can provide, at a fraction of the size, and without expensive maintenance costs!

Since tone is in the hands, the controls of the Acapulco Gold are as simple as possible. The footswitch turns the pedal on and off, and the giant knob controls the output volume. That's it. The rest is at your fingertips. Want less gain? Turn down your guitar's volume knob. Need a darker rhythm tone? Roll back your guitar's tone control. Easy, right?

Big Knob: The big knob sets the output level, sometimes known as Volume. PLEASE BE CAREFUL, the Acapulco Gold is extremely loud!

With your guitar's volume all the way up, the Acapulco Gold roars like a wide-open Model T on the verge of explosion. At just-barely-backed-off, the Gold becomes a raunchy overdrive. At minimum guitar volume settings, the Acapulco Gold delivers a hazy, Nashville-sounding spank to your tone.

How about this? If your guitar has separate volume and tone controls for each pickup and a three-way selector switch, this little one-knob banger becomes a three-channel tone monster at the flick of your wrist!

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 18 mA

Read more
MRP:$177.12 SAVE 25%
 1 in stock $132.29
Earth Quaker Devices Arpanoid V2 Polyphonic Pitch Arpeggiator Pedal
Cat: 781496 Rel: 14 Jul 20
 
Arpeggiator pedal
Notes: Welcome to the first dedicated compact polyphonic pitch arpeggiator effect pedal for electrical guitar! What does the Arpanoid do? The Arpanoid takes whatever you play and transforms it into an adjustable ascending or descending scale. It features 8 intuitive and expandable modes and will work on complex chords as well as single notes in any key. The Arpanoid has an all analog dry signal, all digital wet signal and true bypass switching. Like all EarthQuaker Devices pedals, this dude is handmade one at a time in sunny Akron Ohio.

1. Rate: Adjusts the speed of the sequence.

2. Up/Up-Down/Down Toggle: Switch to control the direction of the sequence. All the way left is up, the sequence will continually repeat going up. In the middle is up/down, the sequence will continually repeat going up then back down. All the way right is down, the signal will continually repeat going down.

3. Step: Selects how many notes there are in the sequence.

4. Wet: Level control for the effect signal. Unity is around noon.

5. Mode: 8 position selector switch to choose the octave and key:

Major: -1 octave to root.

Major: root to +1 octave.

Major: -1 octave through +1

Major: Random pattern

Minor: -1 octave to root.

Minor: root to +1 octave.

Minor: -1 octave through +1

Minor: Random pattern

6. Dry: Level control for the dry signal. Unity is around noon.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 65 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are generally recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
Read more
MRP:$300.45 SAVE 22%
 1 in stock $233.97
Earth Quaker Devices Arrows V2 Pre Amp Booster Pedal
Cat: 781561 Rel: 14 Jul 20
 
Pre-amp booster pedal
Notes: The Arrows is an all-discrete tone sculpting preamp booster. It was designed with the intention of adding an additional channel of gain to all your dirt pedals as well as brightening up neck pickups. It boosts midrange, tightens up the low end and makes the top end shine while adding some push to drive your dirt into blooming sustain with excellent harmonics. Its simple interface is no nonsense; a single control that will either boost or cut your signal. Use the Arrows to remove the muck from bass heavy fuzz pedals, push light overdrives into higher gains than you thought possible or even on its own to make your signal really pop with more pizazz. All analog, true bypass and handmade one at a time in the weird pit of Akron, Ohio.

Level: Adjusts Arrows output level. Clockwise is loud, counterclockwise is quiet.

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are generally receommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 8 mA
Input Impedance: 10 MO
Output Impedance: <10 kO
Read more
MRP:$143.01 SAVE 20%
 1 in stock $114.77
Click for better price!
or call +44 20 7424 1960
quote 781561
Earth Quaker Devices Palisades V2 Mega Ultimate Overdrive Pedal
Cat: 781697 Rel: 14 Jul 20
 
Overdrive pedal
Notes: After loads of requests, for an overdrive based on the legendary TS808, Earth Quaker Devices finally buckled. Tests were ran with every popular clone on the market as well as several vintage originals, compared, contrasted and took loads of notes. It was exhausting but informative. In the end, Earth Quaker Devices used their ears and came up with the most versatile relative of the 808 available today.

With 6 different clipping voices, 5 bandwidth settings and 2 gain channels, you will be hard-pressed to not find a setting that will wipe every mid-boosting overdrive off your board. The Palisades is a versatile dude that will give you years of loving companionship.

Controls:
1. Boost: Sets the level of the output boost.

2. Gain A: Sets the gain for the Channel A (lower gain)

3. Volume: Sets the output level.

4. Gain B: Sets the gain for Channel B (higher gain)

5. Tone: Brighter clockwise, warmer counterclockwise.

Rotary Switches

6. Voice: This sets the nature of the Palisades distortion by changing the clipping diodes.

No diodes: The most open and least distorted.

LED clipping: Light clipping with a lot of volume.

Mosfet clipping: Light gain OD with great harmonics.

Asymmetrical Silicon clipping: Tighter light gain OD closest to stock 808.

Symmetrical silicon clipping: Tighter distorted tone.

Schottky Diode clipping: Looser fuzzy tone.

7. Bandwidth: This sets the overall tone and gain structure of the Palisades. 1 is the thinnest setting with the least amount of gain and 5 is the fattest setting with the heaviest gain. Everything else is in between. This control has a major effect on all the settings of the Palisades, especially the Gain and Voice controls.

Toggle Switches

8. Normal/Bright: Normal is a warm full tone. Bright is livelier tone with more chime.

9. Buffer: Turns the input buffer on or off. ON is a tighter and brighter tone while OFF is a warmer tone with more sag. The buffer is part of the drive circuit & is only available when the Palisades is activated.

Foot Switches

10. Boost: Activates the output level boost, Features Flexi-Switching.

11. Gain B: Activates Gain Channel B, Features Flexi-Switching.

12. Activate: True bypass switch

Tech Specs:
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!

Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs
Current Draw: 25 mA
Input Impedance: 500 kO
Output Impedance: <10 kO
Read more
MRP:$326.69 SAVE 18%
 1 in stock $267.87
Click for better price!
or call +44 20 7424 1960
quote 781697
Earth Quaker Devices Hummingbird V4 Repeat Percussions Tremolo Pedal
Cat: 781684 Rel: 14 Jul 20
 
Tremolo pedal
Notes: The Hummingbird is a choppy, sawtooth tremolo modeled on the vintage "repeat percussion" unit and similar to those found in old Valco and Vox amplifiers. It is capable of producing everything from classic "50's style" shimmering tremolo to a synthy, delay-like chop that turns your signal into a burst of short pings and on through to near ring modulation speeds. Simply choosing between modes 1 (slow), 2 (mid-tempo) or 3 (fast) and adjusting the rate and depth controls will unlock a whole new world of amplitude modulation at your feet. The Rate is also expression pedal accessible to allow instant changes on the fly. Using an expression pedal opens up the possibility of true random amplitude modulation! In addition to the modulation, the Hummingbird has plenty of clean gain on-tap allowing you to either boost or cut the signal using the level control. If the Depth is turned to zero, the Hummingbird will become a JFET clean boost!

Controls:
1. Depth: This adjusts how much the oscillator affects the signal. All the way clockwise produces a full chop, all the way counterclockwise produces no chop and the Hummingbird can be used as a simple JFET booster.

2. Mode: Three way toggle switch which selects the range of the oscillator. Mode 1 is slow, Mode 2 is mid tempo and Mode 3 is fast.

3. Rate: This adjusts the speed of the oscillator. Faster clockwise, slower counterclockwise.

4. Level: Adjusts the output volume

5. Expression Jack: Use an expression pedal to adjust the rate with your foot! When an expression pedal is in use the Rate control is defeated. We recommend the Moog EP-2 expression pedal.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 10 mA
Input Impedance: 50 kO
Output Impedance: <10 kO
Read more
MRP:$216.48 SAVE 22%
 1 in stock $168.37
18/8(ページ1/1)の商品

Filter

Back In Stock: All Genres
Back in stock period
Release Date
Featured
Close