Back catalogue: All genres

Notes: The CTRL Case MPC ONE is custom designed to a hold the new AKAI MPC ONE and is a very lightweight and convenient solution to carry your sampling workstation well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:
Akai MPC One

SPECS
Outer measures: 32 x 32 x 13,5 cm
Inner measures: 28 x 28 x 10 cm
Weight: 0,8 kg

Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Notes: Triple Oak Veneer stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined form Oak Veneered MDF and fits any 3 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Soft case - will ensure the safety of your instruments! Best quality from Cordura with exclusive material finishing with red thread. They are not so heavy as hard cases. High quality embroidered Lyra-8 logo. Very low weight!

(Protection - 1 cm hard foam made from Cordura: Cordura is the brand name for a collection of fabrics used in a wide array of products including luggage, backpacks, trousers, military wear and performance apparel. Cordura fabrics are known for their durability and resistance to abrasions, tears and scuffs.)

Notes: The perfect lightweight travel case for your Digitakt or Digitone! Just zip it up and go make music anywhere. Analog Cases' durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your Digitakt or Digitone + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 10.25 x 7.25 x 2.75 inches

Notes: A Digital DJ looking for a professional, durable case solution for your Akai MPC One+ controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Akai MPC One+ controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications:

Color: Black
Weight: 0,56 kg / 1.232 lbs
Outer Dimensions (W x H x D): 38.3 x 28.6 x 6.7 cm | 15.1 x 11.2 x 2.6 inch
Inner Dimensions (W x H x D): 37.3 x 27.6 x 5.7 cm | 14.6 x 10.8 x 2.2 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extra's:
Heavy-duty handle
Convenient carry handle
Easy grip zipper puller

Fits: Akai MPC One+, Akai MPC One, power adapter & extra cables

Please note: The Akai MPC One Controller is not included in this purchase, it is shown for demonstration purposes only.

Notes: Dust, liquid and accidental impact have taken many a good analogue synth down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the OB-6 module can sit ready for operation. Our OB-6 module cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Designed specifically for the Akai MPC Live, this stand offers a comfortable and ergonomic position for your equipment.

Crafted with two feet connected by 6mm rods to provide enhanced stability, ensuring your MPC Live stays securely in place.

Assembling the stand takes only seconds, and it weighs just a few grams, making it perfect for musicians who use their MPC Live for live performances.

To protect your MPC Live and prevent slippage, the stand includes silicone feet that prevent scratching and sliding.

Introducing the MPC Live Stand - the ultimate accessory for your Akai MPC Live. Elevate your performance and experience with this specially designed stand that combines comfort, stability, and convenience.

With its ingenious construction featuring two feet connected by sturdy 6mm rods, this stand guarantees rock-solid stability for your MPC Live. Say goodbye to wobbling or shifting during intense performances, allowing you to focus on creating music with confidence.

Setting up the stand is a breeze. In just a matter of seconds, you can assemble it effortlessly, thanks to its smart design. Plus, its lightweight construction ensures that you won't be burdened by unnecessary weight when on the go, making it an essential companion for live gigs and studio sessions.

It is important that you protect your precious MPC Live. That's why the stand includes high-quality silicone feet, meticulously designed to prevent any scratches or slips. Your MPC Live will stay in pristine condition, ready to perform at its best whenever you need it.

Choose the MPC Live Stand and take your music production to new heights. Elevate your setup, enhance your comfort, and unleash your creativity with this must-have accessory.

Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm

Notes: Whether you're about to become a content streamer or beat maker or anything beyond - with Neva Uno you're ready to go instantly.

Coming at a super affordable price, Neva Uno offers superior audio quality, elegant design and an extensive software package while retaining a compact form. Equipped with professional pre-amplified microphone and guitar inputs as well as two line inputs, it offers everything you need to get started right away. The USB-C port makes it easy to connect to your computer or mobile device. Neva Uno comes with professional ASIO drivers including DirectWIRE loopback function and more, so you can focus on your creativity.

Features

2 input / 2 output 24-bit / 192kHz USB 3.1 audio interface with USB-C connector
XLR combo microphone preamp with +48V phantom power support
Hi-Z instrument input with 1/4" connector
USB bus powered (no additional power adapter needed)
line output with unbalanced RCA connectors
headphone output with 1/4" connector
ADC with 97dB(a) dynamic range
DAC with 107dB(a) dynamic range
Zero latency hardware direct input monitoring activated by switch
Master output volume control
Supports Windows 10, Windows 11 with ASIO 2.0, MME, WDM and DirectSound
Supports macOS via the native CoreAudio USB audio driver from Apple
Stereo hardware loopback channel for internal recording
Includes Bitwig Studio 8-Track DAW
Includes Steinberg WaveLab LE audio editor license
Works with Cubasis LE from Steinberg for iPhone / iPad
Includes 3 month (up to 9000 minute) subscription to JackTrip Virtual Studio
Dimensions: 10.5cm x 9cm x 4cm


Connectors & Functions

+48V PHANTOM POWER SWITCH to provide power for a condenser microphone.

LINE HI-Z SWITCH for input 2 to switch between Line level and Hi-Z guitar signals.

DIRECT MONITORING SWITCH to enable or disable input monitoring to listen to the input signals.

GAIN KNOB 1 to change the input gain / input level for input 1. The LED ring indicates the signal level.

GAIN KNOB 2 to change the gain / input level for input 2. The LED ring indicates the signal level.

VOLUME KNOB to change the main output volume for connected headphones and speakers.

XLR / TRS COMBO INPUT 1 to connect a microphone via XLR cable or a line signal via 1/4" TRS connector.

TRS INPUT 2 to connect a line via 1/4" TS connector.

HEADPHONE OUTPUT to connect headphones.

LINE OUTPUT 1/2 to connect the stereo master line level output signal via RCA cables for left and right channels.

USB-C CONNECTOR to connect the audio interface to a PC, Mac, tablet or mobile phone.

Small, portable and perfect for your podcasting or live streaming applications

This stylish 24-bit / 192 kHz USB-C audio interface is so small, it will instantly become your new companion on the go and in your studio. Neva Uno is USB bus powered and Plug & Play, just plug it in and start working! It works with any modern Mac (Intel or M1 CPU or better), PC (Windows 10 and higher) and with many portable devices (iPhone, iPad, etc.). One XLR/jack combo input will take either your microphone or line signal, while the second 1/4" jack input accepts line or Hi-Z guitar signals. The inputs feature a mic preamp with up to 50dB gain and 48V phantom power support and the analog-to-digital converter provides 97db(a) dynamic range. On the output side, there is an integrated headphone amplifier and stereo line RCA outputs with a digital-to-analog converter with 107dB(a) dynamic range, allowing you to connect a mixer, amplifier or active speakers. You can monitor incoming audio signals with zero latency, just push the direct monitor button.

Neva Uno is compatible with virtually all common audio software thanks to the professional low latency ASIO 2.0 driver for Windows and CoreAudio compatibility on the Mac. There is even a DirectWIRE hardware loopback function that allows you to route and mix different sound sources internally: perfect for podcasting or live streaming applications.

All this turns Neva Uno into an ideal device to get started in the world of digital audio recording, no matter if you create your own music, if you want to mix and edit audio, if you work on your podcast or even for live streaming. And yet there is more: Bitwig Studio 8-Track and Steinberg WaveLab LE are included. On the iPhone and iPad, you can use Cubasis LE from Steinberg.

An alternative to Neva Uno is ESI's larger model Neva Duo with two microphone preamps.

Notes: With their compact size, Moog's modern modular synths are perfect for travel. But if you're traveling with your Moog, make sure its protected. This PULSE case has been carefully designed with a customized fit and sturdy materials, to keep your Moog in great shape for years to come.

Description:

Manufactured with extremely durable material, a premium zipper that's built to last, and a handle designed for comfort, this case provides the kind of protection that Moog instruments deserve. There's even room for the power supply, and an interior nylon mesh pocket for your patch cables.

Specifications:

Perfect fit for your Moog Mother-32, DFAM, or Subharmonicon

Spacious interior pocket for cables

Comfortable molded handle

Interior dimensions: 15.5 x 6.25 x 4.25 inches

Notes: Soft case for Soma Laboratory Cosmos.

Notes: These Black Valchromat end cheeks for the Isla Instruments S2400 Sampler have been precision machined from HDF Valchromat.

They are a direct replacement for the aluminium ones and come supplied with new screws and have been oiled for a satin finish.

These give your sampler that blacked out look, these are also available in Solid Oak.

PLEASE NOTE: The S2400 is not included, you must by your own.

Notes: The Korg NanoKontrol2 slim-line USB control surface fits perfectly in front of your laptop computer or desktop keyboard, offering impressive control while conserving valuable set-up space.

The Korg NanoKontrol2 controller provides knobs, switches and faders. It is perfect for controlling any DAW computer based DAW or numerous types of other music production software.

In a body proportioned to fit perfectly in front of your laptop computer, the Korg NanoKontrol2 provides 8 channels of the controllers you need to control your music software. It also features a dedicated transport control section. Many software titles are supported, dramatically reducing the need to make complicated connection settings. 1 knob, 1 fader and 3 switches are provided for each of the 8 channels, respectively assigned to pan, volume and solo/mute/record. In addition, there's also a marker button, making it easy to assign marks at important points in your song for more efficient recording and song production.

Notes: The Elektron Model Samples/Cycles are perfect for making music on the go. But we all know traveling with gear comes with risks. Unlike soft nylon bags, this PULSE case is made from sturdy molded EVA material that will provide peace of mind for mobile musicians.

Description:

Custom-designed to the exact dimensions of the Model Samples /Model Cycles, it features a rigid exterior, soft, velvet-lined interior, and a nylon mesh pocket for cable storage. You won't have to worry about the safety of your machine when it's in this PULSE case.

Specifications:

Perfect fit for your Model Samples or Model Cycles + cables

Durable and lightweight

Spacious and comfortable handle

Interior mesh pocket

Interior dimensions: 11 x 7.25 x 2.25 inches

Notes: Plastic dust cover for Soma Laboratory Cosmos.

Notes: Oak Veneered Roland Boutique Custom Made Stand / End Cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc.

This new Oak Veneered version of the stand holds 3 Roland Boutique synths. This will also fit the the tr09, tr08, se02. sh01a and tb03 etc. However, you will need to remove them from the additional case that they come with.

This stand has been made from Oak Veneered MDF wood, and is connected via 12x allen head Confirmat Screws (Allen Key & Screws Provided) into an mdf wooden bar.

These are a great addition to the Boutique synths, and give a much nicer look and better working angle.The Boutique Synths are gripped in place by the sides of the stand, so do not fully tighten screws until the units are placed inside- then tighten screws to hold firmly in place.

Make sure you do this on a flat surface to ensure the feet are correctly aligned.

The item will need assembly as it will be sent flat packed. All screws, tools and rubber feet are provided, however you must buy your own Roland Boutique Synth.

Notes: Online meetings, podcasting, Twitch streams, YouTube content - you can do it all and much more with cosMik uCast.

This USB microphone combines ESI's characteristic outstanding sound quality with a bundle of powerful software so start recording or streaming straight out of the box.

Perfect control

cosMik uCast can be connected to any modern Mac or PC using the included USB cables (USB 2.0 and USB-C). It also works seamlessly with your iPhone or iPad with an appropriate adapter.

The cardioid polar pattern captures musical details, harmonics, and subtle nuances crystal clear, while background noises from behind the microphone is nearly inaudible.

Control your sound with the help of user-friendly knobs on the front of the mic. You can adjust input gain and output volume for the headphone output seamlessly or mute your own voice while still hearing the computer signal. Realtime hardware input monitoring can be controlled via the included software.

Recording

As a podcaster or content creator you often need to record your voice and edit or master your track before providing it to your audience. With cosMik uCast, there is no need to look for external software, because it's all included: WaveLab LE for audio editing, Bitwig Studio 8-Track as a multitrack digital audio workstation (DAW), inTone 2 ESI Edition to play files and prepare streams for online broadcasting as well as Cubasis LE, an optimized multi touch sequencer for iPad and iPhone users.

Live broadcasting

Enrich your live streams on Twitch, Facebook or Instagram: the ASIO driver based on ESI's own EWDM technology guarantees extremely low latency, so you can interact with your audience immediately. Moreover, the ESI-only feature DirectWIRE enables you to integrate external sound sources in your live performance (e.g. background music or effects such as laughter or applause). You can even run your voice through a DAW and alter it in the process (e.g. a reverb or other effects and plugins).

Online meetings and more

The DirectWIRE technology can help you to avoid feedback in your online meeting on Zoom or Skype. By using the DirectWIRE virtual channels, it is possible to separate the signal that is being played out on the monitors from the streamed signal. Unwanted mixing and feedback can be eliminated completely.

The ASIO driver and the DirectWIRE feature can be used with any modern Windows PC. Users of a Mac benefit from the plug & play experience and mobile users of an iPad or iPhone have even access to the powerful Cubasis LE App.

Included accessories

cosMik uCast does not only come with the cables needed to connect it to any USB 2.0 / 3.0 or USB.C (3.1) port of a modern PC or Mac, it also includes a tripod table stand and a microphone holder clip which helps to mount it to a common microphone stand.

Features/specifications

Condenser studio microphone with USB-C audio interface
Cardioid polar pattern
Special 1" diaphragm size
Frequency response: 30Hz - 18kHz
Max. SPL: 130 dB
Dynamic range: 89 dB (ADC), 93dB (DAC)
Signal-to-noise ratio: 89 dB (ADC), 93dB (DAC)
Gain and mute controls
1/8" / 3.5mm headphone output with volume control
Dimensions approx. 176mm x 50mm
Weight: around 250g
Tripod table stand and microphone holder clip included
USB bus powered
Both USB-C and USB 2.0 cables included (each ca. 2m)
100% class compliant
Compatible with PC systems using Windows 7 / 8.1 / 10 and many Linux distributions
Compatible with Mac systems using OS X / macOS, native CoreAudio support (32-bit and 64-bit)
Compatible with iPhone and iPad (connection adapter required)
EWDM driver for Windows 7 / 8 / 8.1 / 10 with ASIO 2.0, MME, WDM and DirectSound (32-bit and 64-bit)
DirectWIRE support under Windows with virtual audio channels for internal loopback recording
Realtime input monitoring can be controlled via the Windows or Mac control panel application

Notes: You are looking at custom-made Korg Volca QUAD Stand / End Cheeks.

This stand holds 4 Korg Volcas, although the Korg SQ1 will also fit.

This stand is made from MDF Fibreboard, and is connected via 16x allen head Confirmat screws (Allen Key & Screws Provided) into a mdf wood bar.

Please note: you will get plain MDF and not darker like in some of the photos.

These are a great addition to the Volcas, and give a much nicer look and working angle. You can also flip them round to have a much steeper angle if you prefer. These can also be painted with ease or stained with wood stain to suit your studio.

The Volcas fit snuggly into the stand so do not fully tighten the screws until the Volca is placed inside then tighten screws to hold in place firmly. Make sure you do this on a flat surface, to ensure the feet are correctly aligned.

The item will need assembly as they will be sent flat packed. All screws and tools are provided; this includes the small rubber feet. However, you must buy your own Korg Volca.

Notes: Protect your Moog Subsequent 37 when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.

Custom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 37 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access

Notes: X-PAD Portable Audio Device

Fully portable audio interface and microphone processor for on-the-go podcasting and recording sessions. The X-PAD brings professional audio processing to a compact and convenient handheld device, cutting the need for bulky equipment out of the creative process. USB-C connection to a smart phone or laptop computer provides a full audio workstation with duplex recording and playback. Microphone input with phantom power option, digital reverb, pitch change and auto-tune processing. Multiple output connections for playback and monitoring via headphones or active speakers. Preset sound effects and user memory for soundbites and loops. All operation is from an internal Li-ion battery, rechargeable via USB. An indispensable companion for podcasts, singing demos and recording on location.

Specifications:

Power source: 3000mAh Li-ion battery or USB 5Vdc 2A, USBUSB-C (PC/OTG - audio v.1.1) + USB-C (charge)
DSP sample rate: 48kHz, 16-bit (S/N 98dB)
Microphone inputs: 3 x 3.5mm jack (Mic.1, Mic.2, headset)
Input impedance: mic2.2k Ohms (Mic.1), 10k Ohms (Mic.2 & headset mic)
Sensitivity: mic-36dB (Mic.1), -26dB (Mic.2 & headset mic)
Sensitivity: line-2dB
Phantom power: +48V (Mic.1), +5Vdc (Mic.2 & headset mic)
Frequency response: 100Hz-16kHz (mic), 20Hz-20kHz (line in) i1dB
Line input: 3.5mm stereo BGM input
Gain: Line in 12dB max.
Smart phone audio connection: 3.5mm TRRS jack (or via USB-C)
Headphone connector: 3.5mm stereo jack
Headphone: impedance:16-300 Ohms
Headphone power: 100mW @16 Ohms (1kHz)
Dimensions: 162 x 78 x 21mm
Weight: 280g

The box for this item contains:

X-PAD handheld portable audio device
USB-C OTG (on-the-go) lead
XLR to 3.5mm TRS jack microphone lead
3.5mm stereo jack lead

Notes: Small bag with front pocket to fit field mixer and any cables or smaller items. hook-and-loop secures the strap so it can be worn in a variety of ways: cross body, over the shoulder or on the waist.

The belt loop can be used to fix to the field belt strap.
Shell fabric is tear and abrasion resistant, nylon 66. Treated with fire retardant, and backed with PU for a 3000 mm water repellent rating.
Hardware is custom designed aluminium alloy 7075-T6.
Dimensions: 120 mm x 95 mm x 30 mm

Notes: Large sized spring reverb tank, Accutronics 9BB2C1B with 3×2 springs and medium decay (1.75 - 3 seconds).

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: Turn your MiCreator Studio into a mobile content creation powerhouse with Y-Lav. Record multiple speakers simultaneously by tethering Y-Lav to your MiCreator Studio. And hear your audio in real time with onboard direct monitoring output. No matter what you create, make sure it sounds as good as it looks with Y-Lav.

Pairs seamlessly with MiCreator Studio to unlock powerful creative flexibility
Connected via the Link Connection (In/Out jack on the MiCreator Studio)
Record high-quality audio for video projects and more
Connect a second pair of headphones via the built-in headphone jack

Technical Specifications

Polar pattern: Omni
Connections: 3.5 mm / 1/8" TRRS, 3.5 mm 1/8" TRS Klinke
Weight: 30 g
Dimensions: 35 x 17 x 17 mm

Notes: NANOPATCH M is a tiny and incredibly versatile patch bay, with mini jacks sockets on both the rear and the top panel. It is ideal for connecting to instruments and a mixer when used in conjunction with NANOPATCH X.

It also works with CV, so can be used as a breakout box for semi-modular synths with outputs in hard-to-reach places (e.g. Moog Grandmother) and devices that output CV over TRS sockets (e.g. MPC ONE).

Dimensions: 76 mm x 70 mm x 22 mm (not including sockets and feet)

Mini jack sockets on the back panel makes it easy to connect to eurorack systems and small instruments such as Korg Volcas.

3.5 mm to 6.35 mm cables can be used when connecting to equipment with 1/4" sockets.

Using standard eurorack cables, easily patch signals from a NANOPATCH M through effects connected to a NANOPATCH X (and back again).

How It Works

Rear sockets labelled 1/2, 3/4, 5/6 and 7/8 can be used for either mono or stereo signals. For example, if a TRS cable is plugged into rear socket 1/2, the left and right channels will break out to sockets 1 and 2 on the top panel. If another cable is plugged into rear socket 2, rear sockets 1 and 2 will correspond to sockets 1 and 2 on the top panel, both in mono.

Normalling

Channels 1-4 can be full-normalled to channels 5-8 using DIP switches located on the side of the NANOPATCH M.

This allows a signal to pass through from instrument to mixer without the need for any patching. When a patch cable is inserted into either socket of a normalled pair, the connection is broken, allowing for custom routing of the signal.

Typical Setup

A typical setup would be to have four instruments connected to channels 1-4 and four mixer channels connected to channels 5-8.

Connections to the mixer could either be made with four separate mono cables (utilizing the sockets on the side) or with two insert cables (as in the diagram).

Notes: USB Audio-Interface for all cases: With two build-in Microphone-Preamps with Phantom Power and a complete 16 Bit/48 kHz Stereo Instrument/Line Interface this class compliant USB Audio Interface is very easy to use. Fully USB powered, with fast Windows ASIO drivers and adjustable headphone output the Audiolink III gives you all the recording possibilities you will ever need. New: The two XLR/TRS combo inputs on the front side.

Works driverless with Mac OS/X, Windows XP SP2, Windows Vista, Windows 7, 8 and Windows 10

ASIO driver for Windows XP/Vista/Win7/Win8 and Windows 10 for download available

Inclusive: free Miditech software bundle (download versions): Toontrack EZ Mix 2 lite, Magix Samplitude Pro X2 Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS, Magix Independence free, Waldorf Edition LE and Imagelines Poizone Synthesizer

Notes: Pulse case for Elektron Digitakt / Syntakt / Digitone

The perfect lightweight travel case for your Digitakt, Syntakt, or Digitone! Just zip it up and go make music anywhere. Our durable PULSE cases are designed for mobile electronic musicians.

PULSE cases are made from moulded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications

Perfect fit for your Digitakt or Digitone + cables
Versatile and lightweight
Spacious and comfortable handle
High quality Analog Cases logo zipper puller
Interior dimensions 10.25 x 7.25 x 2.75 inches

Notes: Introducing the Qu-Bit braided patch cable pack for Eurorack. Qu-Bit built a cable that you would want to use. Plain and simple. It has to feel good and connect well. What could be better than that?

x25 3.5mm TS patch cables
High quality braided sleeve for a soft, secure feel
Multiple lengths to reach every corner of your system

Lengths and Colours:

x5 48"/122cm: Black
x5 36"/91cm: Purple
x5 24"/60cm: White
x5 12"/30cm: Blue
x5 6"/15cm: Gray

Notes: This stand has been precision CNC machined and hand finished from FSC Certified European OAK, the panels have been recessed for your Maschine MK3 to make sure its held firmly in place which is perfect for live and studio use.

A slight working angle has been added for your studio setup, which certainly helps when on a desktop.

The stand is assembled by connecting the side panels with 4x Confirmat Screws. All the fixings and an allen keys to assemble your stand ready for use are provided.

Please note: you will get only the oak stand- you must purchase your own NI Maschine MK3.

The item will need assembly as it is sent flat packed. All screws and tools are provided, this includes the small rubber feet.

Notes: iLok3- now available with USB-C connection.

With USB-C ports becoming increasingly commonplace, PACE have launched a USB-C version of the iLok3. Customers whose computer only has USB-C ports can use this iLok without an additional USB Type-A to USB Type-C adaptor.

This new version does not replace the USB-A iLok3 - both versions will be available.

Notes: Custom engineered in the UK for the Elektron Digitone Keys Synthesiser, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Loci Classic

A great all round desktop stand suitable for most products.
Assembled in seconds
Super strong. A single stand can easily take a 6U Eurorack and heavy case.
Precision laser cut from 6mm oak veneer
Non-slip bands
Packs flat to slide in your case.
30 day money back guarantee

Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)

Notes: Dust cover for the ALM 52HP 6U Synth Module Case.

Notes: NANOPATCH X is a tiny patch bay with the primary function of connecting to guitar pedals and other effects processors. It can be used in conjunction with NANOPATCH M or standalone, for a variety of purposes.

It also works with CV, so can be used as a breakout box for semi-modular synths with outputs in hard-to-reach places (e.g. Moog Grandmother) and devices that output CV over TRS sockets (e.g. MPC ONE).

Dimensions: 76 mm x 70 mm x 22 mm (not including sockets and feet)

How It Works

Each 1/4" TRS socket on the back corresponds to two mono TS mini jacks on the top panel.

By using insert cables (TRS to dual TS), connect up to four pedals to a single NANOPATCH X.

The inputs and outputs of the pedals are then easily accessible via the top panel, using standard eurorack or TRS cables.

Patching can be done directly from instrument to mixer or via a NANOPATCH M.

Notes: The microKEY series are a compact family of USB MIDI keyboards featuring the velocity-sensitive Natural Touch mini-keyboard; acclaimed on instruments such as the microKORG XL and microARRANGER. In addition to the existing 37-key model, the lineup has been expanded with the addition of a supremely portable 25-key model, and a 5-octave 61-key model providing the space to play freely with both hands.

Bundled software and discount coupons are more generous than ever; the 61-key model even comes with a license for the Korg Legacy Collection. The microKEY is the ideal USB MIDI keyboard for the musician who wants to assemble a convenient and compact music production system.

The microKEY25 features excellent portability, allowing you to enjoy playing and producing with a great-feeling keyboard even when you're away from home. It features an expressive Joystick, as traditionally found on larger controllers, and provides simultaneous control of multiple parameters at the same time, along with control of the built-in tempo-synced arpeggiator function. That's not all; the microKEY25 can be powered directly from your iPad via the Camera Connection Kit, and it can be immediately used to control MIDI-capable apps such as Korg's iMS-20. The microKEY25 also includes a download code for FREE Korg M1Le software, giving you all of the preset sounds and all of the PCM waveforms of the original M1, and a browser/search function that makes it easy to find that perfect sound.

Also included are licenses for Applied Acoustics Systems' Strum Acoustic Session, Lounge Lizard Session, and Ultra Analog Session as well as a license for Toontrack's software drum sound module EzDrummer Lite, and a discount coupon for Ableton's Live, Live Suite, and Live LE DAW software, widely popular for its sophisticated functionality.

Notes: Dual Angle 8U Rackmount MDF stand for the Behringer 2600 Range

This stand has been precision machined from MDF and fits any of the 8u Behringer 2600 Synths, It comes complete with 8U Rails and all the Screws/Washers and Cage nuts provided.

Once assembled this allows you to choose from 2 working angles either shallow or steep depending on how you like it.

Please note you will only receive 2x MDF Side Panels with 2x 8u Rails with 8x Nuts/screws and washers, you must purchase your own Behringer 2600 Synth

Other versions are also available in Oak Veneered MDF and Black Valchromat.

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Professional mobile digital recorder for perfect shots "on the road"

Recording your own concert or conference call, recording professional sound during interviews or preserving the ambient sounds of your favourite place: the application examples of handheld recorders are extremely versatile and have absolute justification even in the age of high-end smartphones.

The user interface of the Mobile Digital Recorder is optimized for simple and fast operation. The main functions such as recording, playback, cancelling, noise suppression, sound split. In addition to recording with the internal microphone, an external microphone (not included) can also be used.

Recordings can be made in mono or 2-track stereo at 32Kbps, 64Kbps, 128Kbps, 192Kbps, 512Kbps, 768Kbps, 1024Kbps and 1536Kbps, with 512kbps as the default. The user has an Auto Gain function and eight effect preset modes at his disposal, including rock, funk, hip hop and jazz.

The clear folder structure and an encryption function for the recordings make the management of your own recordings clear and secure. The Mobile Digital Recorder can be operated via the integrated lithium-ion battery or directly USB bus-powered.

The internal storage capacity is 8 GB. In addition, flash cards are supported.

Properties:

Mobile digital recorder with metal housing
Recording formats: MP3, WMA, WAV, OGG, APE, MPC, AIFF, FLAC
8GB internal memory + MicroSD card slot
Dynamic noise cancellation ensures high-quality recordings
Up to 580 hours of recording time
Supports line-in recording (phone, smartphone calls, etc.)
Voice
Automatic storage when the battery is low
A-B loop points, real-time monitoring
Two microphone capsules - also suitable for recording over longer distances
1.8" TFT colour display
Intelligent folder structure
Rechargeable lithium polymer battery
Battery life: up to 10 hours
Incl. USB connection cable and lavalier microphone

Notes: You push the button and the audiowerkstatt din-restarter starts or stops the following sequencer at the beginning of the next bar (4/4-stroke only) in perfect timing.

If the sequencer is running, it will be stopped at the next bar and if the sequencer is standing, it is started at the next bar.

The device operates as a standard in "Sync24"-mode (24 clock pulses per quarter note). By holding the button when switching on, the device is started in "Sync48"-mode (48 clock pulses per quarter note).

Notes: "It f*cks with the fabric of time" Tony Visconti describing Pitch Shifting to Brian Eno and David Bowie in 1976. That not so subtle description does quite neatly sum up what the Pitch Shift programs on the 'Time Fabric' card do!

Pitch shifting in the Z-DSP uses a technique called 'rotating tape head' delay lines named after pioneering tape based experiments in Germany in the 1960s. The tape heads move at speeds independent of the tape playback path and two heads are crossfaded to make a continuous output capable of beautiful pitched delay effects, harmonization and smooth reverbs.

These pitch shifting algorithms are much like the earliest digital pitch shifters released. Sounds similar to the Eventide H910, AMS 15-80 (with Pitch board) and Publison DHM 89 can be achieved. These programs are intended more for pure effects rather than the complex multiple harmony lines later devices and plugins became known for producing. Chords from single VCOs can easily be made using the 'Interval' programs on the card though.

Using a Z3000 to clock the Z-DSP, complete chaos from the delay lines and pitch shifting emerges, creating great and unexpected new sounds. Modulating the stereo pair of analog VC-Feedbacks animates the time and distance of the pitch shift opening up these algorithms for additional control from CV and audio signal alike.

Notes: A Digital DJ looking for a professional, durable case solution for your Akai Force? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai Force, these cases are perfect for the travelling DJ that needs to protect their equipment.

Notes: LOCI Flex is an organically styled 30 degree stand. It has an additional crossbar for supporting larger items and is perfect for studio and performance use.

Great for Desktop Modules and 25 key synths and Eurorack Modular setups.
Crossbar for extra width.
Assembled in seconds.
Super strong.
Precision laser cut from ethically sourced and renewable 6mm Oak veneer.
Beautifully detailed with laser etched logo.
Non-slip pads.
Packs flat to slide in your case or bag.

*** The Akai and Arturia units are not included, they are shown for demonstration purposes only.***

Notes: Compact format audio mixer with 2 mono input channels and a stereo line input. Each mono channel has a combo XLR/jack input with individually switchable mic/instrument impedance and +48V phantom power for the XLR. Input channels have High/Low EQ and Pan controls and mono channels also have Effects level to vary the amount of internal digital delay effect added for vocals or instruments. An internal player/recorder with backlit display can accept a USB memory stick containing compressed audio files in various formats or alternatively connect to a smart phone via Bluetooth for wireless link. Output is delivered on a pair of balanced XLR connectors and offers very low noise operation for high quality studio or live performances.

Notes: This PULSE case is molded to the exact dimensions of the Arturia MicroFreak / MiniLab / MicroBrute. It provides excellent protection for your synth, and is extremely lightweight.

PULSE cases are made from rigid EVA that holds its shape, and they feature a molded rubber handle that's tough and comfortable. This case also includes a nylon mesh compartment for holding your cables.

Weighing in at only 1 pound, this case is a breeze to haul around town. It looks great and is built to last, and can also be used to carry a wide variety of smaller devices.

Perfect fit for your Arturia MicroFreak, MiniLab or MicroBrute

Separate compartment for holding cables

Spacious and comfortable handle

Bottom foam insert to protect your keyboard (removable)

Interior dimensions: 15.25 x 9.25 x 2.5 inches

Exterior dimensions: 16.5 x 10.5 x 3.25 inches

Notes: Your powerful and lightweight KeyStep 37 will instantly become portable with a proper case to protect it during travel. From composing in your DAW to jamming with hardware, the KeyStep 37 can go with you anywhere with this PULSE Case.

Description:

The PULSE Case for the Arturia KeyStep 37 was designed by musicians to be highly versatile for all your mobile mobile scenarios, from tossing it in the trunk to packing it inside your luggage. The KeyStep 37 case is made from rigid EVA material that holds its shape, and is shockproof and water-resistant.

This PULSE Case features an interior mesh pocket that can store any extra cables, as well as an ultrasoft velvet interior lining to prevent any scratches on the surface of the KeyStep 37. With the PULSE Case, you'll never have to worry about traveling with your controller, so you can focus on making great music!

Specifications:

Perfect fit for your Arturia KeyStep 37

Comfortable molded handle

Interior pocket for holding cables

Versatile and lightweight

Interior dimensions: 22.25 x 7 x 3 inches

Exterior dimensions: 23 x 8 x 3.5 inches

Notes: Introducing the Ergonomic Studio Stand for Ableton Push 3: a game-changer in the world of music production. Designed with your comfort and productivity in mind, this stand is the ultimate solution for those seeking a more immersive and ergonomic music-making experience.

Crafted with precision, the stand offers a sleek and sturdy design that seamlessly integrates with your Ableton Push 3 controller. By elevating your controller to an optimal height and angle, it eliminates the strain on your wrists and neck, allowing you to focus on your creativity without any discomfort.

One of the standout features of this stand is its ability to enhance your visual experience. With a specially designed screen mount, it brings the Ableton Push 3's display closer to your line of sight, ensuring crystal-clear visibility of every detail. No more squinting or straining your eyes to read parameters or follow your music-making process. The screen becomes an extension of your creativity, effortlessly accessible at all times.

The stand's ergonomic design also promotes a more organized and efficient workspace. Its integrated cable management system keeps your cables neat and tangle-free, reducing clutter and allowing you to concentrate fully on your music production. Additionally, the stand's robust construction ensures stability, even during intense sessions, guaranteeing a secure and reliable platform for your Ableton Push 3.

Whether you're a professional music producer or an aspiring artist, the Ergonomic Studio Stand for Ableton Push 3 offers unparalleled comfort and convenience. It enhances your workflow, minimizes physical strain, and maximizes your creative potential. Take your music production to new heights with this exceptional accessory that is both stylish and functional.

Upgrade your studio setup today and revolutionize the way you create music with the Ergonomic Studio Stand for Ableton Push 3. Experience comfort, visual clarity, and an improved working environment that will elevate your musical journey to new levels of excellence.

Notes: Dust cover for Soma Laboratory Pulsar-23

Notes: Introducing the Ergonomic Studio Stand for Ableton Push 3: a game-changer in the world of music production. Designed with your comfort and productivity in mind, this stand is the ultimate solution for those seeking a more immersive and ergonomic music-making experience.

Crafted with precision, the stand offers a sleek and sturdy design that seamlessly integrates with your Ableton Push 3 controller. By elevating your controller to an optimal height and angle, it eliminates the strain on your wrists and neck, allowing you to focus on your creativity without any discomfort.

One of the standout features of this stand is its ability to enhance your visual experience. With a specially designed screen mount, it brings the Ableton Push 3's display closer to your line of sight, ensuring crystal-clear visibility of every detail. No more squinting or straining your eyes to read parameters or follow your music-making process. The screen becomes an extension of your creativity, effortlessly accessible at all times.

The stand's ergonomic design also promotes a more organized and efficient workspace. Its integrated cable management system keeps your cables neat and tangle-free, reducing clutter and allowing you to concentrate fully on your music production. Additionally, the stand's robust construction ensures stability, even during intense sessions, guaranteeing a secure and reliable platform for your Ableton Push 3.

Whether you're a professional music producer or an aspiring artist, the Ergonomic Studio Stand for Ableton Push 3 offers unparalleled comfort and convenience. It enhances your workflow, minimizes physical strain, and maximizes your creative potential. Take your music production to new heights with this exceptional accessory that is both stylish and functional.

Upgrade your studio setup today and revolutionize the way you create music with the Ergonomic Studio Stand for Ableton Push 3. Experience comfort, visual clarity, and an improved working environment that will elevate your musical journey to new levels of excellence.

Notes: ELK (Elektron Leveling Kit) is a set of stands designed to match the height and angle of various generations and models of Elektron devices.

The MK2 series (RYTM and A4) features an incline, while other current models such as Digitakt, Digitone, Syntakt, and Analog Heat are flat. Additionally, we include previous generations such as Machinedrum, Monomachine, A4, RYTM, and Octatrack in this list.

With these stands, the fronts of the synthesizers are aligned at the same height and angle, creating a seamless continuation of the equipment placed beside them.

Compatible with Analog RYTM MK2 and Analog Four MK2 DIGI Stand.

Compatible with Digitakt, Digitone, Syntakt, Analog Heat (MK1 and MK2), Machinedrum, Monomachine, A4 MK1, RYTM MK1, and Octatrack (MK1 and MK2).

Each stand has rubber feet on its bottom to prevent slipping or scratching on the supporting surface.

Kit includes: X1 MK2 + X1 Digi elevate stand

Notes: Simple-to-Use Analogue Audio Mixing for Any Application

The Alto Professional TrueMix 500 is a portable mixer with a built-in stereo USB audio interface that delivers all the essential features you need for home recording, livestreaming, podcasting, or performing. There are five analogue inputs with high-headroom circuitry for minimal noise and clipping in your signal. The Mic Input Channel offers an XLR input that's great for connecting a dynamic mic. This channel also has a balanced 14" line input for connecting instruments and other line-level signals. There are also two Stereo Input Channels, each with dual balanced 14" TRS inputs. These inputs are perfect for your line level audio sources. All channels feature a two-band EQ with colour coded knobs that make it easy to dial in your perfect sound when operating in low-light situations. Connecting the TrueMix 500 to your computer is also lightning fast, with plug and play connectivity on Windows and macOS. The TrueMix 500 is your perfect companion for no-nonsense audio mixing and recording on the go.

TrueMix 500 Features

USB I/O for audio playback and stereo recording
1/4" Main, Tape, and Headphone outputs
Mic input channel with balanced line input
Two stereo input channels with balanced 1/4" TRS jacks
Two-band EQ on all channels
2-track inputs w/ assignable routing: Main Mix or Headphone Out

Technical Specifications

Frequency Response: All inputs: 20 Hz - 22 kHz (i1 dB)
THD+N (Total Harmonic Distortion): All inputs: < 0.005% (@ 4 dBu, 1 kHz)

Gain Range
Mic inputs (Channel 1): 0 - 44 dB
Line input (Channel 1): 12 - 30 dBu
Line inputs (Channels 2/3): 0 dBu

Max Voltage Gain
74 dB (Mic Input to Main Out and 2TK Output)
80 dB (Mic Input to Phones Output)
30 dB (Line Input to Main Out)

SNR (Signal-to-Noise ratio) All inputs: > 110 dBu

Impedance

Mic inputs: 3.9 kO
All other inputs: > 10 kO
2TK output: 1 kO
All other outputs: 120 O

Crosstalk
Adjacent inputs: < -80 dB @ 1 kHz
Inputs to outputs: < -75 dB @ 1 kHz (stereo L/R, Channel 1, panned hard left or right)

Equalization
High: +/-15 dB @ 12 kHz
Low: +/-15 dB @ 80 Hz

Connectors
(2) 1/4" (6.35 mm) TRS outputs
(2) 1/4" (6.35 mm) TRS stereo L/R inputs
(1) 1/4" (6.35 mm) TRS headphone output
(1) 1/4" (6.35 mm) TRS mono input
(1) XLR input
(1) Stereo RCA L/R input
(1) Stereo RCA L/R output
(1) USB type-B input
(1) DC power input


Controls
(1) Power switch
(6) Volume control knobs (1 per input and output)
(3) Gain control knobs (1 per channel)
(3) EQ Hi control knobs (1 per channel)
(3) EQ Low control knobs (1 per channel)
(3) Stereo pan control Knobs(1 per channel)
(2) Locking switch buttons

Indicators: (1) Power LED, (3) Peak LEDs, (8) Main Out meter LEDs

Main Mix
Main output: (2) 1/4" (6.35 mm) balanced TRS, +22 dBu max output
2TK output: (2) unbalanced RCA, 0 dBu max output
Headphone output: (1) stereo 1/4" (6.35 mm) TRS, 160 mW @ 32 O

Power
Connection: DC
Voltage: 18V, 500 mA
Consumption: 9 W

Dimensions (width x depth x height):6.3" x 7.6" x 2.6" / 159.5 mm x 193 mm x 66 mm
Weight 2.0 lbs. 0.9 kg