Back catalogue: All genres

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:
Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: ABY Stereo; Consistent Stereo Connectivity

"To A and B or not to B, in Stereo - that is the question."
Enrico Shakespeare, ye-olde scribe of Berlin

There's nothing new about ABY boxes. They're a very commonly used accessory and a staple part of many setups out there. But if they are so common, then why is it so difficult to find one in a stereo format that's well built, noise-free AND affordable?

So, KMA made a killer stereo ABY switcher to use in the workshop. In the process it was found to be so useful, it has been made available to the world too in a pedal format.

Whether you're looking to switch or combine your stereo input signal between two separate destinations or switch or combine two separate stereo input signals into a single output, the KMA Machines STEREO ABY pedal is a dependable little helper for your tonal quest. Created with a focus on durability, reliability, simplicity and hassle-free operation, this passive ABY switcher also features True Bypass active silent relay-based soft switching to reduce mechanical noise and unwanted pops and clicks when in use. So, all you have to do is choose your path and perform!

KMA's STEREO ABY features a fully passive design for the best signal integrity, along with True Bypass active silent relay-based soft switching. While that might be a hell of a wordy mouthful, what it means practically is that the audio signal itself is entirely untouched and without any colouration. Plus, you can use the device in either direction, for sending to different sets of amps or effects or for switching inputs/ instruments/devices into your chain.

However, the actual switching is taken care of by reliable and sturdy soft switches as a separate active circuit. By employing this switching technology, mechanical noise is greatly reduced, as is the risk of those pesky loud c
licks and pops that have plagued so many boards and has haunted so many musicians, since the inception of ABY boxes.

The bears eyes also light up - how awesome is that!? Okay, besides just looking cool and fulfilling boyhood dreams of an army of robot bears with freaking lasers as eyes, the 3 distinct LEDs actually serve a practical purpose; to quickly and easily show you what signal path you've selected at a glance. Red for A, Yellow for B and Blue in the centre for A&B.

This neat accommodating Stereo device seamlessly integrates with your existing setup. It's compact, rugged, lightweight, durable, affordable and can be powered via a standard 9V DC power supply. In addition, without tooting our own horn too much, it just looks awesome. All helping to make it feel right at home amongst the artistic landscape that is your pedalboard. What's not to like?

So, will you choose A, B or both? With the KMA Machines ABY Stereo, the fate of your signal is in your hands!

Notes: Connect your music with the world

The first audio interface designed for sharing

Today's mobile devices make it easier than ever to share your music with the world. From Instagram live-streams to YouTube videos, SoundCloud playlists and more, social media and smartphones have become a key aspect of how many musicians get heard and connect with fans.

iRig Stream makes it easier than ever to share, letting you connect instruments, mixers and more to your iPhone, iPad, Android device and Mac/PC, with convenient features designed just for use on today's most popular platforms. Whether it's mono or stereo, live playing or an existing mix, iRig Stream gets you connected to all your favourite apps, so you can start connecting with listeners instantly.

Features

Stereo line input over RCA connectors
Audio level LED indicators to dial in the right gain fast
Up to 48kHz / 24bit resolution for crystal clear sound
Pre-mixes audio sources down to stereo or mono
Loop-back mixes incoming signals with your device's audio
Headphone out with integrated mic input to talk over your music
Powered by your device for use on the go
Works with all your favourite apps
Custom ASIO driver for superior performance on Windows machines

Mix and stream up to 3 audio sources

iRig Stream makes it easy to connect all your audio sources and route them to a streaming or recording app. Send the digital output of your smartphone, tablet or laptop into iRig Stream, mix it with external audio sources like mixers, DJ decks, keyboards and more. Add your voice from earbuds (or an iRig Mic) and send all 3 signals back to your device to popular apps like Instagram, or just your built-in camera app.

Get connected

iRig Stream makes it easier than ever to connect. With USB, USB-C and Lightning cables right in the box, it plugs into all the latest iPhones, iPads, and Android devices, as well as Mac & PC - even the latest devices.

2 line-level RCA inputs are perfect to connect DJ and multi-channel mixers, but are also great for keyboards, synth & drum machine setups, and more. Whether you're looking to stream your DJ set, record band practice, jam along with your favourite song, or even host a podcast, iRig Stream lets you connect a massive range of gear.

Sound your best

iRig Stream offers 24-bit, 48 kHz A/D and D/A converters to ensure a clean, professional signal regardless of the platform you'll wind up on. And adjustable input gain and easy-to-read level indicators let you dial in the right sound level instantly.

Make your voice heard

iRig Stream offers a unique headphone / microphone jack, wired just like your smartphone, so you can listen and talk over the stereo input simultaneously.

The mic input is mixed into the stereo inputs, to ensure it works with any app, and offers adjustable volume. Best of all, it works with most headphones with a built-in mic*, and also with IK products like iRig Mic Lav, iRig Mic, and iRig Pre, giving you a wide range of options for any situation.

Designed for apps

If you're ever tried streaming or sharing audio on social media, you know many apps only support mono signals - so iRig Stream offers a mono/stereo switch to compensate. Stereo passes both inputs as left & right channels, and mono mixes them together to a single channel, ensuring you won't lose anything panned to one side.

Comprehensive compatibility

iRig Stream works with any app that records or streams audio or video, so you'll never stop finding new ways to use it. To get you started, it includes iRig Recorder 3 LE (iPhone/iPad/Android) - an easy-to-use, high quality audio and video recording app. Record, trim, edit and share,
right from your device.

Built to go and to last
iRig Stream is compact enough to slip into the pocket of your backpack, so it's ideal for use on the go. It runs off your device's battery, so there's no batteries to run out mid-show, but can also charge your device with an optional power supply, to keep you going for extended sessions.

Specs

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz
Power: USB bus powered or DC IN. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream charge the connected iOS lightning device.
Metering: 3x LEDs
Device Connection: mini-DIN

Line input
Connector: 2x RCA (unbal.) Left/Right
Nominal Input Level: -10dBV
Input Impedance: 16.5kOhms
Frequency Response: 20 Hz - 20kHz

Headset/Phones
Connector: 1/8" TRRS jack (CTIA wiring standard)
Supply voltage: > 2,5V
Microphone gain: Adjustable with numbered thumbwheel
Frequency Response: 20 Hz - 20kHz
Headphone Level control: numbered thumbwheel
Headphone Output Power: 100mW into 50Ohms

Package includes
iRig Stream interface
Lightning to mini-DIN connection cable with charging features (60cm/23.62")
USB C-Type to mini-DIN connection cable (60cm/23.62")
USB A-Type to mini-DIN connection cable (60cm/23.62")

Dimensions
Size: 105.5mm/4.15" x 44.5mm/1.75" x 24mm/0.94"
Weight: 65g/2.29oz

Compatibility

iOS Devices

Made for: iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (6th generation), iPad (5th generation).
Also compatible with all newer iPhone, iPad and iPod touch models.

Computers
Macr: macOSr 10.6 or later. One free USB port.
Windowsr: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed. Download the iRig ASIO driver here.

Android Devices
Compatible with Android devices running Android 5 or later and with USB digital audio capabilities. Micro-USB-OTG mini-DIN cable (sold separately) is required.

Notes: Top-quality studio headphones designed for long-term use. Soft alcantara cushions and CoolTech gel pads ensure comfort for long sessions. FitLok system ensures a good fit from one use to the next.

Supplier's Notes:
The RODE NTH-100 professional over-ear headphones offer exceptional sonic performance and superior comfort that inspires creativity. Featuring custom-matched drivers that deliver an incredibly accurate frequency response and ultra-low distortion, and a precision-engineered acoustic design optimised for exceptional detail and clarity, they are ideal for all forms of content creation, including music production, mixing and audio editing, podcasting, streaming and location recording. Luxurious Alcantarar cushions with these revolutionary CoolTech gel ensure maximum comfort, particularly for long-format content creation, and the fully adjustable headband with the innovative FitLok locking system provides the perfect fit every time. Your search for the perfect headphones is over.

Audio as it's Meant to Be Heard

The NTH-100s are meticulously crafted to deliver exceptional sonic performance for critical listening, from monitoring to mixing to mastering. Featuring custom-matched dynamic drivers that have been painstakingly tuned for an incredibly accurate frequency response and extremely low distortion, they are remarkably natural-sounding headphones. These qualities are further enhanced by the unique contoured earcup construction, which is optimised to ensure exceptional detail and clarity, and memory foam cushions for excellent passive noise isolation. They are precision-crafted to retain every detail and every nuance of sound they produce. In other words, audio as it's meant to be heard.

Incredible Accuracy, Exceptional Clarity

The NTH-100 drivers feature a custom voice coil with a four-layer ultra-high-tension aluminium alloy at its core, which is coupled to an ultra-stiff triple-layer Mylarr diaphragm. Combined with a rare-earth neodymium magnet and innovative phase plug inspired by the award-winning NTG5 microphone, these high-grade components ensure an accurate frequency and phase response across the whole audible spectrum for an incredibly articulate listening experience.

The Most Comfortable Headphones Ever.

When it comes to creating, comfort is everything, and the NTH-100s promise comfort like nothing else. The luxurious Alcantarar earcup and headband cushions offer a premium feel that enhances the sensory experience from the moment they are put on - supremely soft and highly breathable. Underneath the Alcantara is a layer of the revolutionary CoolTech™ gel, which absorbs and dissipates heat, actively cooling your head and ears to significantly reduce wearing fatigue. The unique ergonomic design of the earcups is also extremely comfortable, with bi-directional movement and memory foam providing a custom-fit feel for any head size or shape (even if you wear glasses), and the fully adjustable headband with the innovative FitLok™ locking system ensures they feel exactly the same every time you put them on.

Style in a Class of its Own

The perfect marriage of classic aesthetics and cutting-edge industrial design, the NTH-100s are instantly iconic. With clean lines and sleek, high-grade finishes, including the unique ergonomic earcup design and premium Alcantarar cushions, they look as good as they feel. Customise the NTH-100s to suit your style, with high-quality cables available in four vibrant colours: pink, green, blue and orange (matched to the channels of the RODECaster Pro and RODE Connect). Available in 1.2m (3?11?) and 2.4m (7?10?) variants.

Built For Creative Endurance

The NTH-100s are built to withstand the rigours of creating day in, day out. Every component is designed to endure, from the high-strength spring steel headband with its scratch-resistant coating to the highly durable Alcantarar cushions to the locking cable connectors. The cushions and cable are also user replaceable. This modular design ensures maximum longevity, even with vigorous daily use. Every pair is designed and made in RODE's precision facilities in Sydney, Australia using high-grade materials, so you can take on any creative endeavour knowing they'll be with you for the long-haul.

Acoustic and electrical specifications:

Transducer Size (millimetres):40
Operating Principle:Dynamic
Frequency Response: 5Hz - 35Khz
Impedance:32O
Sensitivity:110dBMax
SPL126dB
SPL Ear Coupling: Circumaural
Ambient Noise Attenuation: 20dB
A Connection Type: Dual TRRS Cable Attachments

Mechanical specifications:

Dimensions (millimetres):Length: 80
Width: 190
Height: 188

Weight (grams):350
Cable Length (millimetres): 2400

Included Accessories:

1 x 2.4m Headphone Cable (Black)
1 x 3.5mm to 14-inch Adaptor
1 x Storage Pouch
1 x COLORS ID Set

Notes: Third-generation version of Akai's compact keyboard is a portable instrument in its own right. Battery operation and built-in sounds and speaker let you make music anywhere. Keys and MPC pads offer full control.

Supplier's Notes:
Play Music Anywhere

Musical inspiration can happen anywhere and MPK mini Play mk3 is the perfect portable companion to capture those melodies and harmonies, anytime and anywhere. With battery-operated performance at 14+ hours, MPK mini Play mk3 users don't have to worry about power adapters, chargers, or cables when it's time to play music. The upgraded built-in speaker delivers increased output and added low-end response, making for more enjoyable playing and jamming. With an improved listening experience, users can dive into the 128+ onboard instruments and drum kits including acoustic and electric pianos, synth leads and pads, and more. MPK mini Play mk3 also houses a 1/8-inch headphone output jack for quiet practicing or songwriting without disturbing others.

Professional Performance

At the heart of the MPK mini Play mk3 is the new Gen 2 keybed. This new keybed delivers dynamic performances and accurate velocity response with a feel that players will certainly appreciate. While it maintains its sleek, compact footprint, MPK mini Play mk3 is more playable and comfortable than ever and ready for hours of playing. The 8 pads have been upgraded to real, velocity-sensitive MPC drum pads, offering optimal feel and response for even the most percussive drum parts. With Class Compliant, plug-and-play capability, MPK mini Play mk3 doubles as a powerful MIDI controller and instantly connects to your favourite DAW for immediate music production duties. 4 assignable rotary encoder knobs offer versatile control of MIDI parameters like pan or automation for super-precise editing. With its sturdy construction and build, MPK mini Play mk3 is ready to travel securely alongside any favourite music production items in backpacks or bags.

Limitless Creativity with MPC Beats Software DAW - Effects and Instruments Included

The MPK mini Play mk3 comes bundled with MPC Beats, the powerful music-making and recording desktop software DAW for Mac and PC, based on the iconic MPC hardware. This DAW features a full array of musical instrument plugins, effect plugins, and audio and drum samples ready for your next hit production. In addition to MPC Beats, MPK mini Play mk3 also includes multiple world-class plugin instruments from award-winning sound design company AIR Music Technology. Available in both AU and VST are Hybrid 3 - a powerful polyphonic analogue synth, Mini Grand - an acoustic piano instrument, and Velvet - a vintage electric piano instrument.

Educational Software Included

MPK mini Play mk3 comes with a Melodics educational package. Available as both a desktop and iPad app, Melodics features instruction for MIDI keyboards, pad controllers, and e-drums, offering tailored cross-genre lessons and realtime feedback designed to help refine necessary music creation skills. The free Melodics download includes 60 lessons to get started and with plug and play support, no extensive set-up is required. Sign-up for Melodics with your new MPK mini Play mk3 and discover fun, engaging music performance training and education.

Technical Specifications

Power: Via USB or 4 AA alkaline batteries
Dimensions (diameter x length):12.5" x 7.0" x 2.3" / 317 x 178 x 58 mm
Weight 1.9 lbs./0.86 kg

Notes: Raising the Bar.

Condenser microphones have become a staple of most studio and broadcasting environments around the world for good reason. Their ability to capture the most subtle nuances of vocal and instrument performances has made them the preferred choice for a majority of studio and broadcast professionals.

The YCM01 is a studio-quality condenser microphone that adopts a cardioid polar pattern for more focused sensitivity, making it ideal for a broad range of applications, from live streaming or gaming voice chat, to remote meetings, and of course, music production. Offered in both black and white versions to adapt to your preferred streaming or recording environment, the stylish iconic design of the YCM01 will add a new level of professionalism to your creative content.

Hone in on your sound

The cardioid polar pattern of our condenser microphone ensures the highest sensitivity to sound directly in front of your mic while substantially reducing ambient noise from the rear and sides.

This allows the YCM01 to capture the distinct tones and timbre of your voice or instrument with stunning accuracy, giving your streaming audio an added quality and performance advantage.

*The YCM01 can also be mounted on a tabletop stand, a standard microphone stand, or a desk arm.

Specifcations

Microphone Unit: Back electret condenser type
Polar Pattern: Cardioid
Adress Type: Side
Frequency Response: 30 Hz - 20 kHz
Max Input SPL: 130 dB
Dimensions (Microphone Only): (Diameter) 55 x 166 mm ((Diameter) 2.2" x 6.5")
Weight (Microphone Only): 0.4 kg (0.9 lbs)
Included Accessories: Microphone stand adaptor x 1, Microphone pouch x 1, Owner's manual, Technical specifications

Notes: Great for recording studios, mobile musicians, guitarists, podcasters, and live streaming, the bus-powered Studio 24c 2-in, 2-out audio interface features 2 front-panel combo mic/line/instrument inputs with PreSonus XMAX-L solid-state mic preamps, 2 rear-panel line outputs, MIDI I/O, and onboard direct monitoring control. A complete, all-in-one home recording studio, the Studio 24c comes with PreSonus' award-winning Studio One Artist music production software for macOS and Windows.

World-class recording software included:

Seamlessly integrated with the included PreSonus Studio One Artist music production software, the Studio 24c interface works with virtually all macOS and Windows recording software. Easy to learn, Studio One enables you to compose, record, and produce without getting distracted by the tools. Need a new loop or sample for your latest production? Studio One lets you shop, audition, and purchase new content right from your production environment.

Take the tour:

The 2-in, 2-out Studio 24c audio interface features USB-C computer connectivity and includes combo mic/instrument/line inputs with +48V phantom power for condenser mics; balanced, 1/4-inch TRS, line-level main outputs; and an output level control. Its built-in MIDI interface enables connection to a keyboard, sound module, or control surface. A Mixer knob blends analogue input and computer playback for low-latency monitoring.

Superior sound:

The Studio 24c operates at up to 192 kHz for ultra-high-definition recording and mixing. High-quality converters on every input and output and PreSonus' professional-grade XMAX-L mic preamps enable you to capture complex musical harmonics smoothly and naturally, with no audible distortion.

Designed for the home recording studio. Built for the road:

Whether you're just getting into recording or are a veteran producer who wants to go mobile, the Studio 24c will give you clear, clean, ultra-high-def sound in a bus-powered, rugged unit. While it's a perfect companion for any recording software, the Studio 24c and included Studio One Artist provide you with a complete, affordable, home and mobile recording solution.

Includes Studio Magic Plug-in Suite:

This suite of plug-ins adds a wealth of fresh sounds and effects to Studio One. Cherry-picked from the first names in virtual instruments and effects, each plug-in brings a different flavour of practical magic to your songs. These plug-ins aren't gimmicky one-trick ponies - these are real-deal workhorses that you'll rely on for countless mixes.

Notes: Wireless Foot Control for Digital Music Scores, YouTube, DAWs, Instruments, and Beyond

Ultra-compact and fully customizable, the FS-1-WL is an essential hands-free partner for all your creative needs. Control digital music score apps, YouTube videos, DAWs, and supported BOSS and Roland gear wirelessly over Bluetoothr. Or connect a MIDI cable to operate multi-effect processors, pedals, and other hardware. Expand your setup with external footswitches and an expression pedal. And use the dedicated editor/librarian to assign keyboard commands and MIDI messages to control nearly any software application or MIDI device.

Cable-Free Control for Your Creative World

The FS-1-WL flows smoothly into all your creative activities. Easily pair with devices over Bluetooth to operate a wide range of software apps and music gear.

Music Page Turner

Turn pages in digital music scores with the footswitches as you play. For example, you can move forward as you perform or page back to work on specific areas.

YouTube Learning

Take advantage of YouTube keyboard commands to learn faster with online lesson content. Keep your hands on your instrument and use your feet to control play/pause, rewind, playback speed, and more

DAW Control

Stay focused on capturing great performances with hands-free control of music recording software. Operate record, play, and other keyboard commands in your DAW. Or use the software's MIDI learn tools to configure setups on the fly.

BOSS and Roland Gear

Wirelessly change presets, control effects, and more on Bluetooth-equipped products like Pocket GT, Katana-Air, and Waza-Air, or the GX-100 via the Bluetoothr Audio MIDI Dual Adaptor. And control MIDI keyboards, hardware devices, and computers over Bluetooth using Roland's WM-1 and WM-1D.

Customizable Command

Using the FS-1-WL editor app on your computer or smartphone, you can change up the pre-configured setups to operate just about any software application or MIDI device. Assign keyboard commands to the footswitches, either single keystrokes or combinations with modifier keys like shift and control. Or call up MIDI mode and set up custom PC and CC messages for your devices. You can also create a library of configurations for different needs.

Built Like a BOSS

Backed by decades of BOSS design expertise, the FS-1-WL is comfortable to use and built to last. The footswitches are quiet and easy to press, with no click noises to interrupt your workspace or performance stage. Status LEDs provide high visibility and can be set to different colors with the editor app. Two AAA alkaline batteries offer up to 14 hours of operation on the move, and AC power is supported with an optional BOSS PSA adaptor.

Versatile Connections

Up to two external footswitches can be connected for expanded control with both MIDI messages and keyboard commands. And with an external expression pedal, you have continuous parameter control of any device that responds to MIDI CC messages. The FS-1-WL also features a TRS MIDI jack for wired operation of MIDI hardware devices.

Specifications

Controls:

POWER switch
Bluetooth button (INSTRUMENT)
Bluetooth button (Smartphone/PC)
Pedal switchs (L, C, R)
Indicator:

Power:

Bluetooth (INSTRUMENT)
Bluetooth (Smartphone/PC)
Pedal indicators (L, C, R)

Connectors:

DC IN jack
CTL 1, 2 jack: 1/4-inch TRS phone type
EXP jack: 1/4-inch TRS phone type
MIDI OUT jack: stereo miniature phone type
USB port: USB B
Power Supply: Alkaline battery (AAA, LR03) x 2, AC adaptor (sold separately)
Current Draw; 65 mA

Expected battery life under continuous use (These figures will vary depending on the actual conditions of use.)
Alkaline battery: 14 hours

Accessories:

Owner's Manual
Leaflet "USING THE UNIT SAFELY"
Alkaline battery (AAA, LR03) x 2

Options (sold separately)
AC adaptor: PSA series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
TRS/MIDI connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 207 mm / 8-3/16 inches
Depth: 77 mm / 3-1/16 inches
Height: 32 mm / 1-5/16 inches
Weight: 258 g/10 oz

Notes: ***B-STOCK: Box opened, product in perfect working order***


The MR524 5" Powered Studio Monitors by Mackie offer professional performance, clarity and superior mix translation so you can listen with confidence knowing your mix will sound great anywhere. Drawing from Mackie's extensive studio monitor design experience, the MR524 monitors are precision tuned to stay true to your mix whether it's dialogue, hip hop, rock and beyond. Their proven logarithmic waveguide provides an ultra-wide listening sweet spot and enhanced stereo imaging while the Acoustic Space controls allow you to adjust the frequency response of the monitor to match your studio. The studio monitor inspired by you - MR524 Powered Studio Monitors.

***Now with Pro Tools First (including The Musician Collection) upon registration***

Notes: Portable Analogue Audio Mixing with the Power of Bluetooth

The Alto Professional TrueMix 600 is a portable audio mixer with Bluetooth and a built-in stereo USB audio interface that delivers all the essential features you need for home recording, livestreaming, podcasting, or performing. The TrueMix 600 features a dedicated Bluetooth channel for easily streaming from your personal devices. The Bluetooth channel also supports feedback-free phone pairing by utilizing mix-minus technology, a feature that no other audio mixer series in this class supports. There are six analogue inputs with high-headroom circuitry for minimal noise and clipping in your signal. The Mic Input Channels offers XLR inputs that are great for connecting dynamic mics or condenser mics with 48v phantom power. These channels also have balanced 14" line inputs for connecting instruments and other line-level signals. There are also two Stereo Input Channels, each with dual balanced 14" TRS inputs. These inputs are perfect for your line level audio sources. All channels feature a two-band EQ with colour coded knobs that make it easy to dial in your perfect sound while operating in low-light situations. Connecting the TrueMix 600 to your computer is also lightning fast, with plug and play connectivity on Windows and macOS. The TrueMix 600 is a feature-packed compact audio mixer that's perfect for using on-the-go.

Robust Output Routing

Whether you're making music at home, recording a podcast, or livestreaming online, being able to hear yourself is essential. The TrueMix 600 features a variety of output and routing options to handle any scenario. There are two headphone outputs, each with their own independent volume control knob. If you need to send your audio signals to another destination like an external effects processor, there is an AUX send/return and individual AUX send controls on each individual channel so you can always dial in the perfect mix. For recording, the USB output sends a copy of the main outputs to your computer, or you can connect the 2-Track in/out to an external recorder which can also be sent directly to one of the headphone outputs. The TrueMix 600 delivers everything you need to take full control of your audio routing.

TrueMix 600 Features

USB I/O for audio playback and stereo recording
Dedicated Bluetooth channel with mix-minus return for feedback-free phone pairing
Dual headphone outputs with independent volume control
1/4" Main, Tape, Headphone, and AUX outputs
Two mic input channels with phantom power and balanced line inputs
Two stereo input channels with balanced 1/4" TRS jacks
Two-band EQ on all channels
2-track inputs w/ assignable routing: Main Mix or Headphone Out
Eight-segment LED VU meter for precise level monitoring

Technical Specifications

Frequency Response All inputs: 20 Hz - 22 kHz (+/-1 dB)
THD+N (Total Harmonic Distortion) All inputs: < 0.005% (@ 4 dBu, 1 kHz)

Gain Range:
Mic inputs (Channels 1-2): 0 - 50 dB
Line inputs (Channels 1-2): 15 dBu - 35 dBu
Line inputs (Channels 3-6): -20 dBu - +20 dBu

Max Voltage Gain:
70 dB (MIC INPUT to MAIN MIX OUTPUT)
80 dB (MIC INPUT to CTRL ROOM / PHONES OUPTUT)
60 dB (MIC INPUT to AUX SEND)

SNR (Signal-to-Noise ratio) All inputs: > 110 dBu

Crossover Frequency:
Adjacent inputs: < -80 dB @ 1 kHz
Inputs to outputs: < -75 dB @ 1 kHz (stereo L/R, Channels 1-2, panned hard left or right)

Phantom Power: +45 ~ +49V with switch control

Impedance
Mic inputs: 3.9 kO
All other inputs: > 10 kO
Aux outputs: 1 kO
All outputs: 120 O

Equalization
High: +/-15 dB @ 12 kHz
Low: +/-15 dB @ 80 Hz

Bluetooth
Profile: A2DP
Module: Bluetooth 5.0
Operating Frequency: 2402 MHz - 2480 MHz
Range: 100 ft. / 30.5 m

Connectors
(5) 1/4" (6.35 mm) TRS outputs
(6) 1/4" (6.35 mm) TRS stereo L/R inputs
(2) 1/4" (6.35 mm) TRS headphone output
(2) 1/4" (6.35 mm) TRS mono input
(1) Standard RCA L/R input
(1) Standard RCA L/R output
(2) XLR inputs
(1) USB type-B input
(1) DC power input

Controls
(1) Power switch
(10) volume control knobs (1 per input, 1 aux return, 1 2TK In, 2 headphone out, 1 Bluetooth, 1 Main Out)
(4) Stereo pan control knobs (1 per input)
(4) Aux volume control knobs (1 per input)
(4) EQ Low control knobs (1 per input)
(4) EQ Hi control knobs (1 per input)
(4) Gain control knobs (1 per input)
(3) Locking switch buttons (2 source select, 1 Bluetooth)
(1) Horizontal sliding switch

Indicators
(1) Power LED
(4) Peak LEDs
(1) Phantom LED
(16) Main Out Meter LEDs
(1) Bluetooth LED

Power
Connection: DC
Voltage: 18V, 1A
Consumption: 18W

Dimensions (width x depth x height) 8.9" x 8.5" x 2.9" / 225.5 x 217 x 74 mm
Weight 3.2 lbs. 1.4 kg

Notes: Loci Tripl3

A Tripl3 is a combination of a Classic and Doubl2 stands allowing 3 angled tiers
Can be used as separates, flipper over for other options or combined with additional stands.
Assembled in seconds
Super strong
Precision laser cut from 6mm oak veneer
Non-slip bands
Packs flat to slide in your case.

Notes: A standalone instrument to get you into the world of analogue synthesis. Hand-built, simple to use and capable of some excellent drones and tones. Just add headphones.

Supplier's Notes:
OVUM is where you start: a standalone all-analogue tool for exploratory sound synthesis - all you need to start creating is headphones.

OVUM is designed for exploring pure tones, drones, and microtonal sound textures. Five independently controlled triangle-core oscillators give you five lush voices to layer and evolve. Each voice has a separate control for volume, pitch, and tone, and can be switched between a bright square wave and a crisp triangle wave.

OVUM is hand-built from 100% analogue circuitry, with no digital components, screens, quantization, or key-combinations to memorize - everything is immediate and at your fingertips.

OVUM is enclosed in a beautiful and sturdy wood and aluminum case that feels as good in your hands as it looks on your tabletop.

OVUM has a USB-C port for power, and a single 3.5mm audio output jack for headphones or line-out to connect to an amplifier, audio interface, or effects.

To reduce waste, by default OVUM comes with just the instrument and a USB to USB-C power cable. If you don't have a spare USB power supply, they can be added to your purchase at checkout. OVUM is portable, but does not contain a battery. It can be powered by any USB powerbank.

Notes: Desktop enclosure case for the Empress Zoia Euroboro- 12v power supply included. Euroboro not included- picture shown for demonstration purposes only.

Notes: Arcade-themed synth from Teenage Engineering's amazing Pocket Operator range. Tiny portable synth with quirky chiptune-style sounds, built-in sequencer effects. Super fun.

Supplier's notes:
Arcade synthesizer and sequencer, with parameter locks, chord control and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: The CTRL Case One is a super lightweight and compact carrying solution for your Rane One Controller. The case is crafted from lightweight Durashock molded EVA foam and water repellent polyester exterior. The lid is lined with high density egg-crate foam to protect the display, jog wheels, and controls.

Fits:

Rane One

Basics:

Lightweight Durashock molded 8 mm EVA foam and polyester exterior shell
Sturdy zipper
Incl. high density egg foam to protect knobs, faders, jog wheels and display
Comfortable, rivet reinforced carrying handles
Including detachable shoulder strap (metal buckles)

Specs:

Outer measures: 75 x 41 x 11 cm
Inner measures: 71 x 35 x 8 cm
Weight: 1,9 kg

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:
Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Inspired by the legendary Roland TB-303, the B1 is a bargain-priced analogue acid and bass synth, featuring a built-in sequencer plus saturation and delay effects to bring your sound to life. Incredible value.

Supplier's Notes:
Donner B1 Analogue Bass Synthesizer & Sequencer with VCF, Saturation and Delay Effects

In order to provide better use experience, Donner B1 analog bass synthesizer has made unprecedented innovation in the operation interface, provide simpler and more intuitive interface for all music lovers. And this innovation won the 2022 reddot design award.

Beginner-Friendly Synthesizer Interface

Donner have optimized the sequencer of this synthesizer to be easier and more intuitive to use. Easily edit your own sequences with 128 sequence presets covering a range of musical styles, and 128 user programmable presets.

Silicone Tactile Keyboard with Backlight

The Donner B1 sequencer features modern silicone keys with a color changing backlight, making them a joy to play. In addition to sequencing, you can also play your synth lines live with the keys.

Classic Deep Bass Tone With Saturation and Delay Effects

The B1 allows you to dial in classic deep bass tones such as, distortion and tape delay. It will give you the taste of being one of the famous EDMs, Hip-Hop DJs or producers.

Flexible and Versatile Music Studio at Your Fingertips

The B1 controller connects to your DAW via USB-MIDI for use as a MIDI keyboard, and the MIDI IN/OUT interface connects the B1 to your external MIDI devices for sequencing or as a MIDI controller.Connect external sound sources using the 1/8" audio input. The 1/4" TS mono Main Out carries the main output signal. The 1/8" headphone jack is perfect for monitoring your sound. The B1's audio I/O options have you covered.

The B1 controller & sequencer features all of the deep bass and acid synthesizer sounds of the classic synth, but brings it back in a more intuitive format. Our B-1 bass synth gives you the perfect combination of retro and new school cool.

Specifications

Number of Voices: Monophonic
Type: Analog
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm - 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor: 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): AUX in: maximum input +5 dBu, Sync in: More than 2.5V
Number of Voices: Monophonic
Type: Analogue
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): 3.5mm TRS

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:

Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: Excellent quality at an affordable price courtesy of Arturia's MiniFuse range. Two-in, two-out design with front panel volume control and MIDI in/out to help control hardware synths and drum machines.

Supplier's Notes:
Arturia MiniFuse 2 is an easy-to-use audio & MIDI interface that gives you pro-grade sound quality, smart connectivity, and a curated selection of the industry's best creative software. From guitar tracking to podcast recording, this is your solution for every type of audio creation.

MiniFuse comes from the award winning Arturia AudioFuse line of studio audio interfaces. Class-compliant & Bus-powered means you can plug in and go, and you won't need an additional power supply as it's USB powered. Recording has never been easier.

Creativity connected

MiniFuse 2's inputs and outputs bridge the gap between your ideas and the finished product. Record 2 instrument or mic sources simultaneously with dual combo inputs, sync and record your MIDI devices with 5-pin DIN connections, and connect extra devices with the additional USB hub socket - all via universal USB-C computer connectivity.

Simply the best sound

On paper, MiniFuse 2 gives you a 110db dynamic range and a top-tier equivalent input noise of -129dB. Put more simply, that means unbelievably great sound that can compete with even the finest studios. Enjoy responsive dynamics, a clear noise-free signal, and quality that you can really feel. Tough, portable design MiniFuse 2 is designed to accompany you for those last-minute sessions, quick deadlines, and spontaneous musical moments. It's not only compact and lightweight; its rugged aluminium ca-ing can handle the mobile producer's lifestyle. Take your sound with you, wherever you go. Fully operational Whether you're using a laptop or desktop, MiniFuse can work for you. PC or Mac, connect it and enjoy total recording freedom. Better still, with the MiniFuse Control Center app, you can control its inputs, outputs, settings, and firmware updates in one place. Inspiration on the house Keep your creativity fresh and your inspiration flowing with step-by-step music production tutorials, mixing hacks, and Ableton project templates designed by artists, producers, and beatmakers, featuring the software that's included with MiniFuse. Updated frequently, no subscription re-quired, and free with your MiniFuse. MiniFuse comes with an exclusive selection of software titles offering everything you need to give your sound the professional edge. Arturia FX Color your sound with 4 premium FX plugin recreations of studio classics; a lush plate reverb, a gritty analogue preamp, a classic tape echo, and a rich stereo chorus. Ableton Live Lite Compose, record, perform, and produce anything with an introduction to one of the most widely-used musical software titles in the business - yours with MiniFuse. Analog Lab Intro Instantly add inspiring sounds from our award-winning keyboard emulations to your mix with hundreds of presets to explore, from vintage '80s synths to fat modern sounds. Auto-Tune Unlimited 3-months free subscription Refine your vocal parts for perfect harmony or go full trap-style autotune with a 3-month sub-scription to the industry's favourite voice tuning plugin.

GUITAR RIG LE

An inspiring selection of amps, cabs, delays, reverbs, stompboxes and compressors, so you can build your own processing chains and customize your perfect guitar tones. Splice Creator Plan 3-months free subscription Access millions of hi-def royalty-free samples and plugin presets, from lo-fi drum loops to punchy vocal one-shots, and add them to your personal collection for life.

Notes: The model 230 double support is designed to house two large pieces of equipment, with the ability to improve the operating position of both.

In each position of the bracket, a 30cm piece of equipment can be placed. deep, such as Maschine MK3 and Maschine Jam.

This double support in turn allows it to be used as two simple supports. Simply unscrew the front half from the back.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The width is adjustable according to the length of the rods that join both halves.

The support includes rubber feet so that it does not scratch or slip and the screws for its assembly.

Notes: Simple, solid performance is the order of the day with this MIDI controller from ESI. 16 pads, six rotary encoders and plug-and-play USB compatibility all housed in a classy aluminium unit.

Supplier's Notes:
Developed for Beat Makers, Finger Drummers and DJs

The Xjam is a small, full-fledged plug-and-play MIDI controller. Due to its solid aluminum chassis, the Xjam is wonderfully portable and ideal for use outside of the studio on mobile devices.

With a 4x4 pad matrix, the 6 endless encoders and the smooth 16 pads, it provides a pleasant and expressive playing experience. In addition, the Xjam offers 48 configurations instead of the usual 16 scenes to save.

Its smooth and ultra-sensitive pads with polyphonic aftertouch are as versatile as the Xjam is in general. The 16 RGB pads also send MIDI CC, MIDI Program Change or MMC messages. There are also 6 high-quality endless encoders on board, which can be used in a variety of ways. In addition to controlling MIDI CC messages, the encoders can be assigned to send pitch, MIDI program change messages or even aftertouch messages. The Xjam comes with a powerful editor software for perfect adaption to your needs. There is also a TRS-MIDI Out socket to send signals to external sound generators.

Connectors & Functions

CTRL BANK let you control up to 18 independent parameters
360- ENCODER knobs to send continuous controller messages to your software or external MIDI device
SCENE BANK let you access up to 48 different scenes
PAD BANK let you access up to 48 different pads
PADS polyphonic aftertouch and velocity
USB-C port connects to the computer or mobile device and used to send and receive MIDI data
MIDI OUT for connection and transmission of MIDI data to an external device
FOOT SWITCH input for sustain pedal
EDIT each pad and encoder can be edited independently
SETUP adjust the global settings and the repeat parameters
TYPE allows to choose from different types (MIDI CC, PITCH, PROGRAM, AFTERTOUCH)
REPEAT with two different modes available, temporary and static

Portable

Great for the road & any mobile applications or where space constraints are an issue. Play drums & control effects with the Xjam. Everything's right there for building any style of track, anywhere you feel the inspiration.

Great For Live Shows

The velocity & pressure-sensitive pads are great for playing virtual instruments live onstage. Plus, the pads offer aftertouch that adds a whole different level of expression & control for that extra element to live or studio performance.

Bundled Software

In order to get you started right out of the box, Xjam ships with a powerful software package for professional recording, creation of your own songs, mixing of any audio content and much more. The following applications are currently included:

Bitwig 8-Track

Bitwig Studio 8-Track - the trim and effective DAW to start producing, performing, and designing sounds like a pro for use on up to eight tracks of audio / MIDI, incl. the Bitwig Essentials Package, a versatile selection of handpicked presets and sounds. Record instruments, create your arrangements, design new sounds, or just jam - every feature has been developed by musicians, for musicians!

Steinberg Cubasis LE

Cubasis LE is the compact version of Steinberg's mobile multitouch sequencer, providing the same look and feel of its bigger brother Cubasis. Specially designed for quick and easy operation, Cubasis LE makes recording, editing and mixing a breeze, no matter where you are, right there on an iPhone or iPad when connecting Xjam.

Steinberg WaveLab LE

Whether you are a hobby musician, home studio owner, freelancer or podcaster - WaveLab LE helps you to bring your music, voice and sound recordings to a more professional level. This easy-to-use mastering and audio editing software from Steinberg turns your computer with Xjam into an audio analysing, editing and publishing studio.

Specifications

MIDI Pad controller
6 velocity-sensitive pads
3 colour pad indicators for velocity and edit/setup operation
6 MIDI encoder knobs, all programmable
Sustain pedal input
48 user-programmable scene presets, available for instant recall
Sends and receives MIDI data
Bus powered: needs no batteries or AC adapter
Size: 200mm (7.87 in) x 135mm (5,3 in) x 23mm (0.59 in)
Weight: 371g (0,8 lb)
3.5mm TRS jack to female 5-pin DIN MIDI cable available separately

Notes: The Glorious Record Rack 330 is a vinyl storage solution that allows you to store up to 330 vinyl records and features a highly-robust design alongside a sleek, professional finish.

Notes: DR-07X bring high-quality recording to an easy-to-use portable powerhouse with a size and price that anyone can handle. A pair of condenser microphones handles small to loud sound up to 125dB SPL with the sensitivity to capture every detail.
The layout of the DR-07X has been revamped to be quick and easy to work with one thumb. Operations like recording, adjusting levels, deleting bad takes and adding markers are just a button press away.
DR-07X is equipped with adjustable unidirectional microphones that can be used for recording in both the A-B position and X-Y position. Advanced microphone placing allows for a wide stereo sound recording or a clear stereo sound recording with less phase difference, making it possible to achieve professional quality recordings.

For example, even if you want to record acoustic guitar duo one day and large choir or band concert on the other day, you can change microphone configuration and set it for more suitable stereo capturing. A-B configuration is for more far image that capture wider horizon. On the other hand X-Y can prevent missing sweet center spot, so it is more suitable for tight image.

Menu display of dr-07x supports 10 languages:
English/ Spanish/ French/ Italian/ German/ Russian/ Chinese/ Korean/ Japanese/ Portuguese

DR-07x uses only two AA batteries and has ultra-long battery capability. When using built-in microphones, recording lasts 17.5 hours when recording with standard 2ch WAV, 44.1kHz/ 16bit format using alkaline batteries.
Also dr-07x can be powered by a USB mobile battery as well for super long extended use.
Connecting to a PC with USB Audio interface mode, DR-07X becomes a strong yet easy gear for voiceover work, live streaming and songwriting with studio-quality audio. Built-in microphones work as just as USB microphones without complicated settings.

Writing down what you hear easier said than done, but it is actually easy with DR-07X. In addition to its capability to capture crisp voice recording, DR-07X can help you with its Jump back function, variable Speed function and equalizer preset for human voice.
In addition to its excellent recording capability, DR-07X is an excellent musical instrument practice tool. An internal Reverb effect works both on playback and recording, allowing you to rehearse your performance with spacious concert hall reverb. A chromatic tuner is also available.
Auto recording function can detect the sound input signal level and automatically start recording. Also, Pre-recording function with up to 2 seconds pre-record provides fail-safe protection even when you are a bit late to hit the record button.

Peak Reduction works in rehearsal mode or in record. Even if the sound or performance is louder than the sound check you're safe. Combined with Auto level and Limiter for preventing distortion, you never have to worry.
If you don't like the last part of a phrase you just recorded with your guitar, or if you change your mind and want to rephrase narration, the Overwrite mode is exactly what you need. Overwrite mode allows punch-in recording from a desired point. It is destructive editing with one level of undo.

Notes: Connect with Bluetooth

The M-Audio BX4BT Multimedia Reference Monitors offer the flexibility to playback audio from any Bluetoothr streaming device with excellent studio quality sound. This opens the possibilities of playing audio from any Bluetoothr device including a turntable, phone, or even a computer to stream a reference mix. Get a better listening experience with these compact, powerful, Bluetoothr enabled M-Audio BX4BT multimedia reference monitors.

Professional Performance and Design

M-Audio's BX4BT monitors produce 120 Watts of professional sound inside a futuristic design that delivers pro-grade sound. The two-way design features an Acoustically-inert MDF cabinet with bass reflex that pushes low frequencies through modern Black Kevlarr drivers. Plus, enhanced rear ports and computer-optimised natural silk dome tweeters deliver the full spectrum of frequencies needed for any type of media.

Front & Rear Panel I/O

The BX4BT monitors offer all the connections you need to playback audio from all your devices. The rear panel features 1/4", 1/8", and RCA inputs, while the front panel features 1/8" aux input and a headphone connection that turns the speakers off for private listening. This feature is great for those late nights in the home office or mixing sessions where you don't want to disturb anyone.

Speaker Placement Controls & EQ

The M-Audio BX4BT features a Left/Right Active Speaker Position Switch letting you choose which speaker is sounding from the Left or Right side. This is useful if you are left-handed and want the speaker with the front panel volume control on your left side, or vice versa. Also on the rear panel are High-EQ and Low-EQ controls to boost or cut the low end or add some shimmer to the highs.

Limitless Creativity with MPC Beats Software DAW - Effects and Instruments Included

The M-Audio BX4BT comes bundled with MPC Beats, the powerful music-making and recording desktop software DAW for Mac and PC based on iconic MPC hardware. Featuring a full array of musical instrument plugins, effect plugins, and audio and drum samples, MPC Beats is the best way to start making great-sounding music quickly.

Technical Specifications

Frequency Response: 69 Hz - 22 kHz
Output Power: 120 W (total peak), 2 x 25 W (RMS)
Drivers: LF Driver 4.5" / 114.3 mm HF Driver 1" / 25.4 mm; silk dome
Audio Inputs: (1) RCA stereo input pair 2 1/4" (6.35 mm)
TRS inputs: (1) 1/8" (3.5 mm) stereo auxiliary input
Headphone Output: 1/8" (3.5 mm) stereo output
Interconnection Cable: 1/8" (3.5 mm) TRS
Bluetooth Range: 100' (30.5 m)
Power: 100-240 VAC, 50/60 Hz, 85 W
Dimensions (width x depth x height, per speaker): 6.1" x 6.9" x 8.9" 156 x 175 x 225 mm
Weight (per pair of speakers:) 9.83 lbs. 4.46 kg

Notes: Create a high-end recording studio anywhere with Revelator io44. Whether you want to connect a professional XLR microphone, a guitar, a DJ mixer, or your gaming headset, Revelator io44 has all the inputs and outputs you need to record... even a built-in mixer that lets you blend audio from multiple applications. Processing is available on every analog input, so you'll sound smooth and polished in your performances and recordings.

Guitarists, singers, DJs, and everyone else: you'll sound great, regardless of if you're tracking a record or performing live online.

25 years of studio-grade design experience is inside Revelator io44. Your XLR microphones will sound their best thanks to the PreSonus XMAX-L mic preamp with plenty of gain for your professional microphone to capture your voice smoothly, naturally, and distortion-free - and the onboard processing will make your voice stand out. Whether you're recording a vocal or chatting with your followers during a livestream, you'll be heard loud and clear.

Revelator io44 features an easy-to-use mixer that lets you blend audio from up to three different applications at once. Add backing tracks, Skype calls, and even gameplay quickly and easily without taxing your computer. An automatic output limiter prevents your stream from distorting. Whether you're on macOS or Windows, you can create custom mixes of your inputs and your applications and monitor it all at near-zero latency so you can stream and record simultaneously!

Features

Ultra-compact, mobile bus-powered USB-Cr compatible audio interface for recording, streaming, podcasting and more
96 kHz / 24-bit operation for pristine audio recording
1 digitally controlled, high-headroom, low noise XMAX-L mic preamp for professional results
1 Instrument input (via combo) for guitars and basses
1 TRS ?" Stereo Line input for DJ mixers and more
Stand-alone functionality lets you take your sound with you
?Balanced Main Left / Right with independent level control and mute
1 TRRS 1/4"""" stereo Headset connection (mic in, stereo out)
Integrated mixer lets you blend audio from up to three applications at once
Powerful onboard StudioLive processing lets you polish your sound (or completely transform it) with reverb, compression, EQ, and fantastic Voice FX - all without taxing your CPU
Professionally crafted Presets make you sound like a pro with a single click. You can also create your own custom presets to share, save, or produce on the go
Studio One Artist recording software and Studio Magic software bundle included

Notes: The Volca Mix is a four-channel analogue performance mixer that lets you construct a live setup combining multiple Volca units.

Volume faders are easy to control, plus crisp-sounding LO/HI CUT filters, and a master chain that radically transforms the sound. In addition to the sync function found on all Volcas, there are also DC output connectors that can supply power for up to three Volca units. Numerous functions to facilitate your on-stage Volca performances have been packed into a high-quality aluminium-panelled body, reminiscent of a high-end DJ mixer. The Volca Mix will unlock the maximum potential of the Volca series.

An analog mixer for performance:

The Volca Mix is a four-channel analog mixer with an intuitive interface and plenty of connectivity. It provides two mono inputs and one stereo input, perfect for connecting three Volca units. The jacks are mini-jacks, allowing you to make connections with just one stereo mini-cable from the headphone out of each Volca unit. The channel volumes use vertical faders that allow precise control. The gain can be boosted to adjust the mix balance, and mute buttons are also provided. Each channel is also equipped with a LO/HI CUT filter that lets you control the low and high frequency ranges with a single knob. The pristine, natural-sounding filters that you expect from analog gear give you complete control over the character of your sound.

Output and monitor capabilities for use on stage, plus stereo speakers for maximum portability:

The output section provides RCA stereo line outputs to ensure stable connection. There's a master volume with LED VU meter for adjusting the output level, as well as a headphone output that can be used simultaneously with the line output, providing a reliable monitoring environment on stage. Speakers are also built-in for excellent portability. The stereo speakers are placed at both sides of the front, and while compact, deliver SPL levels that are even greater than the built-in speakers on previous Volca units.

Powerful master chain:

The Volca Mix is equipped with master effects powered by all-analog circuitry. In addition to an expander that broadens a mono source into a stereo sound image, there's a dynamic range compressor that compresses the high-frequency range according to level changes of the low-frequency region, as well as a side chain effect that's indispensable for dance music. Use these to dynamically vary the mix, adding a professional feel to live performances with the Volca.

Connect an external effect unit for further variety:

The Volca Mix provides a stereo mini-jack send out and AUX in jack, and send level knobs for each channel. This allows you to use it with an external effect unit in a send/return connection. When used in conjunction with a unit such as the mini Kaoss pad 2S, you can also enhance your live performances using standard effects such as reverb, delay, filter, and break. The AUX in jack can also be used as a stereo input channel for a fourth Volca unit, an iOS app, or any other gadget, instrument, or device.

As the master of your Volca live setup:

The Volca Mix features an analog sync out jack that can easily be connected to many pieces of KORG gear for tempo sync, and also a play button and tempo knob to control that sync signal. By using the Volca Mix as the sync master device of your live setup, you can easily enhance your live performance, such as simultaneously playing sequences from multiple synced units, and combining mute and volume control to create performances that use your Volca units in even more ingenious ways.

Notes: High-resolution sound at a low price thanks to Tascam's US-HR range, provided here in 2-in, 2-out format with integrated MIDI in and out. Simple, no-fuss solution for hooking up to your DAW.

Supplier's Notes:
High-Resolution USB Audio/MIDI Interface (2 in, 2 out)

The US-2x2HR is a member of the Tascam US-HR series of high-resolution USB audio interfaces. It provides two mic/line/instrument switchable inputs and two balanced line outputs as well as MIDI I/O to your Windows or Mac computer or your iPhone or iPad. This interface is ideal for music creation and home recording with high demands on simple operation and studio-quality sound. The included loopback function and support for Open Broadcaster Software (OBS Studio), however, makes it also an excellent choice for podcast creation and live streaming.

The compact US-2x2HR incorporates a wealth of features, including high audio resolution up to 24-bit/192 kHz, ultra-low latency with a Windows buffer size starting at four samples, Ultra-HDDA mic preamplifiers with 48-volt phantom power for superior sound quality with ultra-low noise, a robust USB Type C connector, and a rich assortment of included software to start producing audio right away. This interface can also be used for mobile production or live streaming using your iPhone or iPad with the included Cubasis LE. Simply put, the US-2x2HR helps you create and distribute great-sounding audio wherever you go.

All US-HR models offer a unique dye-cast aluminum honeycomb structure on the side panels with a slight upward tilt. This design not only results in a sleek, eye-catching design, it also provides just the right amount of weight so the interface won't move when cables are connected or disconnected. Equally important, the upward tilt offers the ergonomic benefit of being angled in such a way as to make the interface easy to work with.

If you're a musician, producer or home-recordist who needs a solid, uncluttered, easy-to-use audio interface with superb sound quality, the Tascam US-2x2HR can be your reliable partner for many years.

The Ultra-HDDA (High-Definition Discrete Architecture) mic preamps used on the US-HR series feature a discrete construction. They have a higher number of components and are far away from mass-produced preamps. Their EIN (equivalent input noise) rating, which measures the absence of noise, is truly low for the US-2x2HR and US-4x4HR. Combined with a newly improved audio circuit and support for sampling rates up to 192 kHz, our in-house developed microphone preamplifier delivers enhanced audio performance with the most transparent and low-noise sound, reflected in a signal-to-noise ratio of 110 dB.

One issue when recording using a computer is latency, which is when audio signals are delayed through digital circuitry. Another is setting up the driver software that is used when connecting an audio interface to a computer. In order to eliminate these problems, our driver software introduces only very little latency and is easy to install. Furthermore, by making the external structure of these interfaces as simple as possible, the Tascam US-2x2HR and US-4x4HR allow users who are not expert users of audio equipment to operate them without concern.

The Settings Panel, which is installed on your computer, comes with a variety of functions. You can choose whether direct monitoring is done in mono or stereo and adjust the balance between input and computer signals. You can also switch the hardware inputs on and off individually and set the Windows buffer size according to your working environment.

For online broadcasting, Internet communication and other live streaming applications, the US-HR series interfaces offer a Loopback function which can merge input signals 1/2 with signals 1/2 coming from the computer (each can be set to mono or stereo) and send that mix to the broadcasting or other software on the computer. A software slider allows to adjust the final "broadcast" volume independently from the unit's line output level setting.

Instead of a computer, you can also use an iPad or iPhone together with the US-2x2HR/US-4x4HR to make music. Performance has been tested with not only the bundled digital audio workstation (Cubasis LE3), but also with other popular recording software - you can continue to use them even if you change DAW software. Since these units include MIDI inputs and outputs, you can connect MIDI keyboards, drum computers etc. to play sounds on the iPad or computer and thus expand your personal orchestra.

Maximum input level (Mic/Line/Inst): +10 dBu / +20 dBu / +10 dBV
Maximum input gain: 56 dB
Maximum output level: +20 dBu
Mic preamp equivalent input noise: 128 dBu
S/N ratio: 108 dB / 110 dB
Distortion (THD+N, mic to computer): 0,0013 %
Crosstalk: 95 dB
Power supply: USB / DC 5 V, 700 mA
Power consumption: 1.75 W
Overall dimensions (W x H x D): 186 mm x 65 mm x 160 mm
Weight: 1.1 kg

Notes: Turn your smartphone into a professional filmmaking rig with the RODE Phone Cage. This magnetic mobile filmmaking cage features an ultra-secure mounting system for attaching a MagSafer iPhoner or other smartphone with a magnetic case. Five cold shoe mounts allow for easy mounting of a wide range of accessories, including microphones and lights, with in-built cable management ensuring your rig stays neat and tidy. Conveniently placed 14-inch and 3/8-inch threads facilitate connecting even more accessories, including handles and tripods, allowing you to customise it to your needs. The Phone Cage is made from lightweight aluminium and is incredibly rugged, perfect for outdoor use and run-and-gun filmmaking.

Magnetic mobile filmmaking cage
MagSafer compatible
In-built cable management slots
Five cold shoe mounts for attaching microphones and lights
14-inch and 3/8-inch threads for use with tripods, handles and other accessories
Facilitates portrait and landscape shooting

Mechanical specifications

Mounting Options:
Cold Shoe Mounts: 5
Standard 1/4-inch Thread: 14
ARRI 1/4-inch Thread: 17
3/8-inch Threads: 2

Weight (grams): 285
Dimensions (millimetres):
Length: 245
Width: 35.5
Height: 126

What's in the box

1 x Phone Cage
1 x Magnetic Phone Mount
1 x Locking Screw

Notes: The AI-1 is a professional-grade single-channel audio interface that delivers exceptional audio quality for everything from bedroom music recording to livestreaming and podcasting. Featuring a studio-grade preamp, a high-quality Neutrik™ combo jack for connecting microphones or instruments, and a high-power headphone amplifier for crystal-clear audio monitoring and playback, it's the perfect interface for recording studio-quality audio at home.

Key Features:

Professional-grade single-channel audio interface
Neutrik combo jack for connecting microphones, guitars, synthesisers and other instruments
Studio-grade preamp with level indicator
High-power headphone amplifier

Studio-quality Sound With Ease

With a single input and streamlined controls, the AI-1 is incredibly simple to use - just connect it to your computer, plug in your microphone or instrument, and hit record. Under the hood, the AI-1 packs plenty of punch, including an ultra-low-noise, high-gain studio-grade preamp for recording pristine audio, balanced 14-inch outputs for connecting your favourite speakers, and a high-power headphone amplifier capable of driving professional high-impedance models for flawless monitoring.

Get Connected and Create

The AI-1 features a high-quality Neutrik combo jack for connecting both XLR and 14-inch cables, so you can plug in your microphone, guitar, bass, or synthesiser with ease. Switchable phantom power ensures any microphone is accommodated, while the simple indicator LED allows you to monitor your input level for crystal-clear audio every time. Every AI-1 also comes with a free version of Ableton Lite, so you can get recording right away. Whether you're livestreaming or making multi-layered music, the AI-1 will capture your sonic vision in every detail.

RODE Central

RODE Central is an easy-to-use companion app for the AI-1 (and other RODE devices) that allows you to access device information and update to the latest firmware. The latest firmware version adds an extended gain range for enhanced performance with low-output dynamic microphones. To update, download RODE Central below and follow the prompts.

Note: OS Requirements - MacOS 10.13 or later; Windows 10 Version 1803 or later; iOS 14 or later; Android 9.0 or later.

Specifications

Acoustic & Electrical Specifications
Gain Range: 60dB (with firmware version 1.3.1)
Bit Depth: 24-Bit
Sample Rates: 44.1kHz 48kHz 88.2kHz 96kHz
48V Phantom Power: Yes
Simultaneous I/O: 1 x 2
Number of Preamps: 1
Direct Monitor: Yes
Bus Powered: Yes
OS Requirements: Mac OS10.10 or later Windows 7 or later
Power: USB bus-powered

Mechanical Specifications
Form Factor: Desktop
Analogue Inputs: 1 x Neutrik XLR-1/4" combo
Analogue Outputs
2 x 1/4" speaker outputs (impedance balanced) 1 x 1/4" headphone output
USB Connectors: 1 x USB-C
Depth: 100mm total (with knobs), Chassis: 88mm
Width: 124mm
Height: 38mm
Weight: 1lb/3.7oz/560g
Warranty: 1 year (extending to 2 years after product registration)

Box Contains:

1 x AI-1
1 x USB-C to USB-A Cable

Notes: The Headliner Gigastand is a fully-adjustable laptop stand designed for DJ's, Musicians, Performers, and Creators. Constructed of steel and aluminum, it provides the ultimate combination of portability and durability.

It is configurable in C or Z positions, and folds flat thanks to the intuitive ratchet lever system. Easily loosen and tighten each joint to find the right angle for your setup. The telescoping neck rotates 360- and has a max height of 16".

The Headliner Gigastand fits laptops up to 17" and can also be used with other devices such as iPads, small controllers, samplers, drum machines, etc. Carrying pouch included.

Features

Fully-adjustable laptop stand for DJ's, Musicians, Performers, and Creators
Ideal for storing and traveling with compact folding design and included carrying pouch
Rugged construction of steel and aluminium for the ultimate combination of portability and durability.
Ratchet lever system makes it a breeze to find the perfect position for the stand. Easily loosen and tighten each joint to find the right angle for your setup.
Fully adjustable tray and feet up to +/- 90%
Telescoping neck with 360- rotation and max height of 16"
Configurable in C or Z positions to fit into most workspaces
Also fits small controllers, samplers, drum machines, and more
Fits laptops up to 17"

Dimensions:

Tray (WxD): 250mm x 232mm / 9.8" x 9.1"
Legs (WxD): 250mm x 296mm / 9.8" x 11.6"

Notes: UDG have further fined-tuned what was already a great design concept of a flight case into one specially for the most discerning creative performers. Constructed from aluminium thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam, which allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for Ableton Push 3 and creating another slot beside for cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Case Ableton Push 3 is designed to keep your Ableton Push 3 protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your gear safe.

Specifications

Colour: Black
Weight: 5,50 kg / 12.1 lbs
Outer Dimensions (W x H x D): 39.0 x 50.0 x 16.5 cm | 15.3 x 19.7 x 6.5 inch
Inner Dimensions (W x H x D): 38.0 x 49.0 x 15.5 cm | 14.9 x 19.3 x 6.1 inch
Material: Aluminium

Protection: Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & egg-crate foam on lid
Two side strong butterfly lock
Rubber feet at the bottom for support in standing

Extras

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers

Fits

Ableton Push 3, power adapter, extra cables

Notes: Based on the iconic and critically acclaimed AT2020, the AT2020USB+ cardioid condenser microphone brings affordable, professional quality into the homes of podcasters, musicians and voiceover artists alike. Plug and Play compatible and engineered for crisp detail, the AT2020USB+ has been a firm favourite amongst creators for many years.

Equipped with a USB output, the AT2020 USB+ is designed for digitally capturing music or any acoustic audio source using your favorite recording software. The microphone offers the critically acclaimed, award winning sound of the AT2020, with studio quality articulation and intelligibility perfect for singer/songwriters, podcasters, voice over artists, field recorders, and home studio recorders.

The AT2020 USB+ features a built in headphone jack with volume control that allows you to directly monitor your microphone signal with no delay. It also offers mix control that blends microphone and pre recorded audio. The microphone's cardioid pickup pattern delivers excellent off axis rejection, while its A/D converter with a 16 bit, 44.1/48 KHz sampling rate ensures extremely articulate sound reproduction.

Audio Technica's state of the art design and manufacturing techniques ensure that the microphone complies with the company's renowned consistency and reliability standards.

Specifications

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20 - 20,000 Hz
Power Requirements: USB Power (5V DC)
Bit Depth: 16 bit
Sample Rate: 44.1/48 kHz
Volume Control: Mix control; Headphone volume control
Weight: 386g
Dimensions: 6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter
Output Connector: USB-type
Headphone Output Power: 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load)
Headphone Jack: 3.5 mm (1/8") TRS (stereo)
Accessories Included: Pivoting stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable

Notes: "Old school tube mellow" is the phrase most often used to describe the sound of the V67G. Designed mainly for vocals, the V67G combines Class A FET circuitry and a transformer-coupled output resulting in a pure and warm sound. Its classic green body and gold plated grill provide stunning good looks. The V67G adds body to vocals for all styles of music. This top-seller has been used on countless recordings and is a welcome addition to your microphone collection.

Classic FET design with warmth and midrange makes this mic perfect on both drums and vocals
Perfect addition to any mic locker adding "classic" character to ordinary sources
Transformer balanced output ensures more of your source and less noise

Technical specifications:

Mic type: Condenser microphone
Capsule: 32mm capsule with Gold-sputtered, 6 micron diaphragm
Frequency response: 20 Hz - 20 kHz
Polar pattern: Cardioid
Sensitivity: 15mV/Pa
Impedance: 200 ohms
Equivalent noise level: 20 dB (A-weighted IEC 268-4)
S/N Ratio: 74 dB (Ref. 1 PA A-weighted)
Max SPL for .5% THD: 130 dB
Power requirements: 48V Phantom power

Size and weight:

47 mm x 184 mm / 1.85 in. x 7.24 in.
590g / 1.3 lbs

Metal finish: Green with gold grill

Included accessories: MT-001 hardmount

In the box:

MXL V67G Mic
Hard Mount Mic Stand Adapter
Carrying Pouch

Notes: ***B-STOCK: Box opened, product in perfect working order***


Introducing the special edition Pod20 customized for ModBap Modular by 4ms, the Modbap20.

The Modbap20 Powered Eurorack Case can be your on-ramp to eurorack, a great option for a focused mini system, or a live control surface, or the perfect way to expand a larger system. The Modbap20 is 20HP in width, and 34mm deep with 4ms power bus boards. The included power brick and your favorite combination of up to 20HP modules are all you need to get started with your new mini system, control pod, performance pod, effects pod, or whatever you so desire.

Features

20HP wide, 34mm deep powered Eurorack case
power brick (included)
Available power: 0.7A (+12V), 0.28A (-12V), 0.2A (+5V)
Rugged anodized aluminum construction

Notes: A Digital DJ looking for a professional, durable case solution for your Pioneer PLX-CRSS12 turntable? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer PLX-CRSS12 turntable, this case is perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight: 2,35 kg / 5.17 lbs
Outer Dimensions (W x H x D): 52.5 x 43.5 x 21.0 cm | 20.7 x 17.1 x 8.3 inch
Inner Dimensions (W x H x D): 45.8 x 35.8 x 17.0 cm | 18.0 x 14.1 x 6.7 inch
Material: Durashock moulded EVA foam

Protection:

Water repellent laminated nylon exterior
Removable top-bottom egg crate foam prevent damage from vibrations and shocks
Black soft fleece interior

Extras

Convenient carry handles and shoulder strap
Easy grip zipper pulls

Fits

Pioneer PLX-CRSS12 turntable

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 is 32HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod32 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Not plastic, metal. No muffled, mids-centric sound but tight low mids and present treble. No problem with feedback, spill or handling noise; instead, maximum flexibility for the voice: the e 835 is a solid choice for performers. Moderation and singing remain crystal clear and natural, even at varying distances from the capsule. Its extremely rugged construction and uncomplicated handling make the e 835 the first choice for rehearsal rooms, home recording or the stage. It has also become a top seller in its class everywhere that speech intelligibility is critical: lectures, presentations or conferences in auditoriums large and small alike.

Dynamic cardioid microphone for speech and vocals

Cuts through high on-stage levels

Clear reproduction with a high presence

Consistent sound quality (varying distances, moving off axis)

Handles high sound pressure levels

Optional silent on/off switch

Isolates handling noise, hum compensating coil

Excellent feedback rejection

Rugged metal housing

Specifications

Dimensions: O 48 x 180 mm
Connector: XLR-3
Frequency response (Microphone): 40 - 16000 Hz
Transducer principle (Microphone): dynamic
Weight: 330 g
Pick-up pattern: cardioid
Sensitivity in free field, no load (1kHz): 2,7 mV/Pa
Nominal impedance: 350 O
Min. terminating impedance: 1000 O
Weight w/o cable: 330 g

What's in the Box:
1 e 835
1 microphone clip
1 pouch

Notes: ***B-STOCK: Original box damaged, product is in different packaging but in perfect working order***


Enter the world of studio-based recording with the M-Track 2X2 Vocal Studio Pro - the ultimate all-in-one solution for computer recording projects. Combining the critically acclaimed M-Track 2X2 interface, HDH40 headphones, a Nova Black condenser microphone, XLR cable and the premium C-Series Software Suite, laying down vocal tracks, recording electric and acoustic instruments and adding voice-overs to multimedia projects has never been easier. With the M-Track 2X2 Vocal Studio Pro, the combination of high-performance hardware and easy-to-use software results in pro-grade audio capture for every recording scenario.

More Than Just An Interface:
This is the creative centre of your recording setup: simple-to-use, style-infused M-Track 2X2 C-Series audio interface is the perfect tool to record and produce natural-sounding 24-bit/192kHz studio-quality recordings. Combining one XLR+ 1/4" balanced combo input and an all-new dedicated 1/4" instrument input, the M-Track C-Series 2X2 enables you to record two channels simultaneously. The versatility of a combo input accommodates any source audio with a microphone or line-level output while a tailor-made gain and impedance stage on the conveniently located instrument input guarantees a clean, accurate guitar or bass DI signal.

Fusing an elegant pro-grade metal chassis, USB & USC-C connection cables, all-new transparent low-noise Crystal pre-amps and pristine A/D converters that deliver the highest audio performance in their class, the M-Track 2X2 provides all the tools you need to capture that initial idea and transform it into a finished masterpiece with ease. Take your music to the next level and start recording now!

Professional Recording - Done:
Studio-grade recording demands the right tools for the job. M-Audio's Nova Black large-diaphragm condenser microphone is perfect for podcasting applications or capturing high-quality audio from vocalists, instruments, percussion and more

At the heart of the Nova Black microphone is an 18mm pure aluminium condenser capsule with a directional cardioid polar pattern. This delivers wide range frequency response (20 - 20kHz), high sensitivity (-38dB, 0dB = 1V/Pa @ 1kHz) and accurate transient response, resulting in a microphone that captures even the most subtle nuances with ease, with minimal interference from unwanted ambient noise.

With the Nova Black condenser microphone, complicated setups are a thing of the past. Thanks to an included windscreen, a purpose-designed shock-mount for mounting to a traditional mic stand and an XLR cable, everything you need to get connected and start recording is included.

Hear Every Detail:
Professional recording demands uncompromised accuracy when it comes to monitoring. M-Audio's HDH40 headphones combine premium transducer elements with a durable, rugged design to deliver superb sound reproduction and the outstanding acoustic isolation required in professional recording and monitoring environments. Long sessions are no problem! The plush padding reduces fatigue during extended use, and the over-the-ear design ensures that the HDH40 stays secured while you're wearing them. With the HDH40, you can concentrate on what's important - your production!

Included Software:
- AIR Creative FX Collection (20 world-class FX AU/VST plugins as made famous by Pro Tools)
- AIR Strike
- AIR Xpand! 2
- AIR Mini Grand
- Steinberg Cubase LE

***UPDATED SOFTWARE COMPATIBILITY***

Pro Tools First and Eleven Lite software are now included with the current line-up of M-Audio keyboards and interfaces - for all existing and new customers! The industry-standard Pro Tools music software bundle and the Eleven Lite plugin gives artists unprecedented creative options with the most realistic virtual instruments/effects anywhere.

***NOW INCLUDES 2GB SOUND LIBRARY OF IN-DEMAND SOUND CONTENT FROM TOUCH LOOPS***

Notes: Sound your best anywhere

A great interface is the one that's always there for you. iRig HD X is the new flagship of the iRig guitar interface family, bringing breathtaking sound quality and even more advanced features to guitarists everywhere. Compact enough to store in your gig bag, iRig HD X lets you connect anytime with inspiring new ways to play and sound amazing.

Practice with popular learning apps or favorite songs. Browse and discover thousands of new tones on ToneNET. Record ideas wherever inspiration strikes. Stream videos of you jamming to backing tracks. Warm up before gigs with all your favorite tones. No matter where you are on your musical journey, with iRig HD X the possibilities are endless.

Your new mobile dream rig

iRig HD X + TONEX and AmpliTube for iPhone and iPad gives you an incredibly versatile mobile rig with 2 powerful ways to find your sound: TONEX using IK's AI Machine Modeling technology, and AmpliTube offering the ultimate tone processing and recording studio. Play, practice and record on your mobile device with the most authentic and hyper-realistic gear models ever made.

Ultra-compact, high-quality audio

iRig HD X features a whisper quiet and transparent instrument preamp with wide frequency response and dynamic range that ensures every nuance of your playing is accurately translated while preserving the true tone of your instrument. The Headphone Out and Amp Out are equally high end offering exceptional sound quality in a device this portable.

One knob to do it all

iRig HD X sports an all-new enclosure featuring a LED ring input level indicator that also doubles as an ultra-fast and precise tuner for the connected instrument. Its ergonomic, multi-function knob lets users quickly adjust headphone level, loopback functions, direct monitoring and the tuner.

Reach your guitar goals faster

Practicing should be fun. With iRig HD X you'll be inspired by professional guitar tone while you learn. From anywhere, easily connect to the most popular learning apps while playing through the best amp models. Use the included TONEX and AmpliTube apps to load one of your go-to tones then launch your preferred app to study music, tabs or the original song. It's that easy!

Discover the best tones online

iRig HD X comes with AmpliTube 5 SE with 80 models covering all the "must have" gear. You also get TONEX SE for Mac/PC and iOS, which includes 200 Premium Tone Models plus unlimited user Tone Model downloads from ToneNET. You can browse, demo and download new guitar and bass tones within TONEX or build the ultimate guitar rig with AmpliTube 5.

Have fun playing along

Imagine finding perfect guitar tones from ToneNET for songs you love. Got a few minutes to play? Just plug-in and open up AmpliTube or TONEX and start jamming with incredible tone. No need to plug in a pedalboard or out-board gear. Play along with backing tracks on YouTube or from your music library or streaming service. Staying inspired has never been this easy.

Jamming and performing with friends

With iRig HD X it's easy. No more lugging a pedalboard to rehearsal spaces. All you need is right in your gig bag. Just show up and connect the Amp Out jack to an external amplifier or powered monitor. Everyone will be amazed by your tone as you load favorite AmpliTube presets or TONEX Tone Models from your iOS device (or laptop).

Recording audio tracks

iRig HD X is recognized by all desktop and iOS recording apps. TONEX and AmpliTube for Mac/PC work standalone or as plug-ins inside your favourite DAW so it's easy to record a DI or a processed guitar part. You can use the Loopback+ feature of iRig HD X (which acts like a virtual FX loop) to route your guitar signal first to TONEX or AmpliTube and then into your recording app.

Recording and streaming Video

The same feature that lets you record processed audio on your mobile device also lets you record or stream video with your amazing guitar tones sounding crystal clear. Use the Loopback+ feature of iRig HD X to route your guitar signal first to TONEX or AmpliTube and then into the video recording App on your iPhone or your streaming App of choice. You fans will love how great you sound.

With more ways to connect on more devices and with all your favourite apps, iRig HD X is your all-access pass to limitless musical experiences.

Ideal for all players

Whatever your level and style of music, iRig HD X will keep you connected to the newest and best tools for sounding great, learning new songs, advancing as a player and sharing the music you make with others. Sound better, play more and improve faster throughout a lifetime of guitar with iRig HD X.

Specifications

Common
AD and DA resolution: 24-bit
Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Host connection: USB Type-C socket

Instrument Input
Input impedance:1 MOhms
Maximum input level: +9 dBu
Frequency response: From 20 Hz to 20 kHz within 3 dB (96 kHz sample rate)
Dynamic range: 115 dB(A)

Amp Output
Configuration: Unbalanced
Output impedance: 3.3 kOhms
Output level: 0 dBFS corresponds to -2 dBu
Frequency response: From 15 Hz to 40 kHz within 1 dB (96 kHz sample rate)
Dynamic range: 97 dB(A)

Headphone Output
Output impedance: 22 Ohms
Maximum output level: approx.. 8 mW into 32 Ohms load
Frequency response: From 15 Hz to 40 kHz within 1 dB (96 kHz sample rate)
Dynamic range: 95 dB(A)

Package includes
iRig HD X interface
USB-C to USB-C cable (60 cm/23.62")
USB-C to Lightning cable (60 cm/23.62")

Dimensions
Size: 99 mm/5.35" x 42 mm/2.27" x 25 mm/1.35"
Weight: 54 g/1.9 oz.

Compatibility

iOS Devices
Made for: iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone SE (2nd and 3rd generation), iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Air (3rd, 4th and 5th generation), iPad (9th generation), iPad mini (5th and 6th generation), iPad Pro 12.9-inch (1st, 2nd, 3rd, 4th and 5th generation), iPad Pro 11-inch (2nd and 3rd generation), iPad (8th generation), iPad Pro 11-inch, iPad Pro 10.5-inch, iPad Pro 9.7-inch, iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad (5th, 6th and 7th generation), iPod touch (6th and 7th generation).
Also compatible with all newer iPhone, iPad and iPod touch models.

Computers
Macr: macOS 10.6 or later. One free USB port.
Windowsr: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.

Notes: M4U eX is a compact and yet extremely powerful USB 3.0 MIDI interface with 8 MIDI ports.

Each of the 8 ports can either be used as a MIDI input or as a MIDI output, replacing not only traditional MIDI interfaces like it's popular predecessor models with 4 inputs and 4 outputs, but providing also other possible configurations. For instance, you can use up to 8 outputs at a time or up to 8 inputs, or 6 outputs and 2 inputs - to name some examples. And the best feature? This is all handled automatically, simply based on your connection to other MIDI inputs or MIDI outputs and each automatic input / output configuration is displayed via colored LEDs on the front panel.

M4U eX is not only one of the worlds first USB 3.0 MIDI interfaces, it also includes a USB 3.0 hub with 3 connectors for other USB equipment like software dongles or USB keyboards and others. This can literally turn this device into the central hub for your MIDI and USB musical instrument devices. The class compliant device can be bus powered or if needed for other USB devices, be powered by the included DC power supply.

The Windows 7 / 8.1 / 10 / 11 and macOS compatible device provides not only perfect timing and the highest low latency performance of any MIDI interface in it's class on the market today, it can even be used fully standalone without a computer: different operation modes allow you to route input to output signals, merge MIDI signals or use M4U eX as a MIDI thru box. These modes can be selected with the push of a button when needed.

If the 8 ports are not enough, you can connect multiple units to the computer at one time - plus there is also the larger M8U eX available, with 16 ports.

Features/specifications

USB 3.0 MIDI interface
100% class compliant, works without the installation of a driver
USB bus powered
8 MIDI ports, 4 on the front and 4 on the back
Automatic input and output detection, each port works as a MIDI input or MIDI output
Standalone operation possible
Can be used as MIDI Thru box in standalone mode to send one MIDI signal to 7 outputs
Can be used as MIDI merger in standalone mode to merge 7 MIDI signals to a single output
3-port USB 3.0 hub with external 5V DC power supply to power USB devices (power supply included)
Multiple units can be used with one computer at a time
Downwards compatible to USB 2.0 with a USB 2.0 legacy mode
Optional ESI MIDI Port driver for multi device / multi client operation under Windows available
Dimensions roughly 17.5cm x 12.0cm x 4.5cm

Notes: ZED-6 has been created for musicians, singer / songwriters and venues seeking Allen & Heath's renowned build and audio quality in a compact, portable format. Whether it's bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZED-6 is a versatile companion for every step of the creative journey. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analogue warmth and depth. Guitarists will be pleased to know that ZED-6 comes with a pair of Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes.

ZED-6 features an exceptional new preamp design, created by analogue guru, Mike Griffin and developed from his highly acclaimed GS-R24 studio recording console. Known as GSPre, the preamps deliver exceptionally low noise and massive headroom, and the warmth and depth that Allen & Heath's analogue range is famous for. For tonal shaping, the precise MusiQ EQ controls have been carefully calibrated for responsiveness and precision, making it easy to shape and enhance each musical source.

All ZED mixers are designed and built to Allen & Heath's legendary touring grade standards to ensure a long life in the toughest environments. All channels are on individual, vertical circuit boards and all rotary controls are secured to the front panel with a steel nut to guard against impact damage.

ZED-6 comes with two Guitar DI high impedance jack inputs, allowing guitars to be plugged straight into the mixer without the need for DI boxes. That's one less piece of gear to buy, carry and set up.

Allen & Heath has been a trusted name in professional audio since 1969. The ZED technology advances, but the commitment to audio excellence and build quality endures.

Notes: The easy-to-use production toolkit to get you creating podcasts quickly and in great quality on your computer or iOS device. The UR12 Podcast Starter Pack combines a dual-channel USB 2.0 audio interface, quality condenser microphone and all mic accessories with a full software suite. It's a complete, studio-grade social media production package.

The ST-M01 studio condenser microphone

The ST-M01 studio condenser microphone includes the heritage of many high-quality studio mics. With excellent sensitivity and a wide frequency response for recording speech, singing or any musical instrument, it captures every nuance of the signal in excellent quality.
The included accessories

These qualities are enhanced by the included pop screen to reduce noise, a low noise microphone cable to connect the ST-M01 to the UR12 and a tabletop mic stand to help you place the microphone in the best position.

Advantages Of Using The UR12 Podcast Starter Pack

Become a podcast pro with the complete package

Share your thoughts, inspiration, ideas and news with the world by recording podcasts for broadcast on any online medium, or write them to audio files for distribution or download. With this versatile and highly portable production package, you can produce your podcast anywhere - at home, at work, on vacation, even in the middle of nowhere! With seamless PC/Mac computer and iOS compatibility, it has everything you need to become a true podcast pro.

Attract and entertain followers by live streaming

Streaming and vlogging are great ways to reach new audiences, as well as entertaining your existing followers. The UR12 Podcast Starter Pack provides the ideal platform for you to go live online. The Loopback function lets you easily stream any audio content to live online platforms, with the included condenser microphone, high-quality inputs and included software meaning your audience will hear everything in superb quality.

Work from home in the best audio quality

Nowadays working from home has become commonplace; connecting with colleagues and business partners via video chats is an essential part of the working day for many people. The UR12 Podcast Starter Pack includes everything you need to help improve the quality of your spoken contributions to online meetings. With the high-quality UR12 audio interface, microphone and accessories, you can help your colleagues and business partners to clearly understand your message.

Go live online

The UR12 Podcast Starter Pack includes everything you need for performing online. Whether it's karaoke with social singing apps like Smule, live music, spoken recitals, sports commentaries or just having fun with friends, the iOS connectivity and included high-quality condenser microphone, cable and pop shield make it the ideal online performance package, wherever you are.

Connectivity

Total number of inputs: 2
Total number of Outputs: 2
Microphone inputs: 1
Inputs with HI-Z: 1
Analogue inputs TRS: 1
Analogue inputs Combo: 0
Analogue outputs TRS: 0
Phantom power: 1
Headphones outputs: 1
Digital In ADAT: 0
Digital Out ADAT: 0
Digital In S/PDIF Optical: 0
Digital Out S/PDIF Optical: 0

Dimensions

Weight: 850 g
Width: 159 mm
Height: 47 mm
Depth: 144 mm

DSP

Monitoring: Hardware based zero latency monitoring (switchable)

General
Connection Type: USB 2.0
Design: Desktop (1/3 19", 1HU)
Casing: Full-metal casing

AD/DA: 24 bit
Maximum sample rate: 192 kHz
Dynamic range input: 101 [dB]

System requirements

Operating systems (Mac): macOS High Sierra, macOS Mojave, macOS Catalina, macOS Big Sur, macOS Monterey
Operating systems (Windows): Windows 7 (64-bit), Windows 8.1 (64-bit), Windows 10 (64-bit), Windows 11 (64-bit)
Operating systems (iOS): iOS 14, iOS 10, iOS 11, iOS 12, iOS 13
Apple silicon-based Mac: Rosetta 2 App
Port: USB 2.0, USB 3.0 (Tested with Intel USB 3.0 host controller)
CPU minimum (Windows): Intel Core i-series multicore processor 2 GHz or faster, or AMD equivalent processor
RAM minimum: 4 GB
Hard disk free space: 100 MB
Display resolution recommended: 1280 x 800
Internet connection for: manuals and instructions, driver and tools, additional downloads, license activation, account sign up and product registration, installer download

Notes: Introducing the CTRL CASE DJM-V10/DJM-A9 - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit both, the latest Pioneer DJM-A9 and DJM-V10 club-mixer models, providing maximum protection with a Durashock molded EVA shell and fully padded interior. Plus, it features a convenient slot for storing audio cables and power adapters.

Fits:

Pioneer DJM-A9
Pioneer DJM-V10

Basics:

Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Incl. removable egg-foam plus fully padded interior
Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
Compatible with Decksaverr cover

Specs:

Outer measures: 57 x 56 x 15 cm
Inner measures DJM-V10: 46 x 44 x 7 cm / DJM-A9: 43 x 41 x 7 cm (Equipment slot)
Weight: 2,3 kg
Colour: black/black

Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter

Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter

Notes: Raising the Bar.

Condenser microphones have become a staple of most studio and broadcasting environments around the world for good reason. Their ability to capture the most subtle nuances of vocal and instrument performances has made them the preferred choice for a majority of studio and broadcast professionals.

The YCM01 is a studio-quality condenser microphone that adopts a cardioid polar pattern for more focused sensitivity, making it ideal for a broad range of applications, from live streaming or gaming voice chat, to remote meetings, and of course, music production. Offered in both black and white versions to adapt to your preferred streaming or recording environment, the stylish iconic design of the YCM01 will add a new level of professionalism to your creative content.

Hone in on your sound

The cardioid polar pattern of our condenser microphone ensures the highest sensitivity to sound directly in front of your mic while substantially reducing ambient noise from the rear and sides.

This allows the YCM01 to capture the distinct tones and timbre of your voice or instrument with stunning accuracy, giving your streaming audio an added quality and performance advantage.

*The YCM01 can also be mounted on a tabletop stand, a standard microphone stand, or a desk arm.

Specifcations

Microphone Unit: Back electret condenser type
Polar Pattern: Cardioid
Adress Type: Side
Frequency Response: 30 Hz - 20 kHz
Max Input SPL: 130 dB
Dimensions (Microphone Only): (Diameter) 55 x 166 mm ((Diameter) 2.2" x 6.5")
Weight (Microphone Only): 0.4 kg (0.9 lbs)
Included Accessories: Microphone stand adaptor x 1, Microphone pouch x 1, Owner's manual, Technical specifications

Notes: AIAIAI's affordable XE range might just offer the best value studio headphones around. Balance S01 drivers and comfortable E04 ear pads are paired with a slim headband for great sound at a reasonable price.

Supplier's Notes:
Modular studio headphones.

Balanced and detailed sound
Enhanced comfort over-ear cushions
High sound isolation
Weighing only 190g
Modular headphone design

Modular studio headphones with highly detailed sound and full bass extension, balanced for music production. Comfortable PU leather over-ear earpads provide high isolation, reducing surrounding noise when creating on the go. Weighing only 190g for enhanced comfort over extended periods of time.

Balanced detailed sound

Critically acclaimed sound stage specifically designed for studio use with a clear and highly detailed sound representation.

The speaker unit contains a bio-cellulose diaphragm made from bacterial cellulose, an organic compound grown using certain types of bacteria. The precision-grown diaphragm from bio-cellulose is stiffer, lighter, and stronger than regular PET speaker units, allowing the sound-producing diaphragm to vibrate without the levels of distortion found in other speakers.

Each of these qualities results in more accurate and detailed sound from the speaker with the ability to retain clarity of sound at high volumes.

With a minimal and lightweight construction of only 190g, the TMA-2 Studio XE is ideal for the flexible, versatile and dynamic workflow of modern music makers.

Lightweight & comfortable

High grade over-ear memory foam cushions covered in resilient and soft PU leather, for enhanced comfort during long creation sessions or live performances. The over-ear cushion design provides high sound isolation when creating in noisy environments.

Headband made from high grade nylon combined with durable PU leather earpads, results in a total headphone weight of only 190g.

In the box

S01 . Balanced sound - Bio-diaphragm

Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose to reduce distortion and increase transparency. Tuned for a balanced, accurate sound. Balanced sound - Bio-diaphragm.

H01 . Slim - PU foam

Slim and lightweight polycarbonate headband with soft, durable PU foam padding.

E04 . Over ear - PU leather

Soft over-ear memory foam cushions covered with PU leather. The thickness and materials provide better comfort and excellent isolation. Adding a low end boost for a warmer sound with powerful dynamics.

C05 . Straight - 1.5m - Adapter

Straight black 1.5m thermo plastic cable with soft touch surface. Comes with 1/4 to 1/8 screw-on adapter.

Headphones for life

As a music creator, you need headphones that can keep up with your evolving needs and styles. These TMA-2 modular headphone system offers a customizable solution that adapts to your creative process. With interchangeable components such as earpads, cables, and drivers, you can upgrade or change parts of your headphones to improve sound quality, comfort, or style.

By investing in this modular headphone system, you're not just buying headphones - you're investing in a long-term solution that evolves with your music. This reduces electronic waste while ensuring that you always have the optimal headphones just for you.

Diaphragm: Bio-cellulose
Driver diameter: 40 mm
Impedance: 32 Ohm
Magnet: High-grade Neodymium
Max power: 100 mW
Rated power: 40 mW
Resonance freq: 80 Hz

Notes: Introducing the CTRL CASE FOUR - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit the latest Rane Four DJ-controller, providing maximum protection with a Durashock moulded EVA shell and fully padded interior.

Fits:

Rane Four

Basics:

Crafted from 8 mm thick and rigid Durashock moulded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Incl. removable egg-foam and 4 EVA foam-corners
Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
Compatible with Decksaver cover

Specs:

Outer measures: 87 x 46 x 14 cm
Inner measures: 78,5 x 39,5 x 11 cm
Weight: 2,65 kg
Colour: black