Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

preorders
ホーム  Back In Stock  Studio Equipment  Studio Equipment  14 days
Subscribe here to receive our weekly roundup of the latest studio equipment products

Filter

Back in stock period
Release Date
Featured
Options
150/64(ページ1/2)の商品
1  2  »
After Later Audio 45cm Gold & Black Braided Patch Cables (18", pack of 5)
Cat: 1004606 Rel: 12 Mar 24
 
45cm gold & black braided patch cables, pack of 5
Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.
Read more
 2 in stock $10.52
After Later Audio 45cm Single-End Stackable Patch Cables (18", pack of 5)
Cat: 1004672 Rel: 13 Mar 24
 
45cm single-end stackable patch cables, pack of 5
Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).
Read more
 2 in stock $15.78
After Later Audio 60cm Single-End Stackable Patch Cables (24", pack of 5)
Cat: 1004673 Rel: 13 Mar 24
 
60cm single-end stackable patch cables, pack of 5
Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).
Read more
 2 in stock $15.78
AIAIAI Unit-4 Wireless+ Portable 2-Way Active Studio Monitors (pair)
Cat: 973245 Rel: 08 Feb 24
 
2-way active monitors featuring a 4-inch high-excursion woofer and 1-inch silk-dome tweeter.
Notes: Unique studio monitors from AIAIAI, featuring built-in battery power and high-resolution, low-latency Wireless+ streaming for fully wireless use in any setting. Compact, versatile and powerful.

Supplier's Notes:
Wireless and portable studio monitors with powerful performance and accurate sound representation. Connect wirelessly for a clutter-free setup and bring your creative process anywhere.

Experience unparalleled flexibility and truly liberating mobility in your creative process as a music producer. These studio monitors allow you to create and mix music with accurate sound representation and powerful performance wherever you are. Connect wirelessly to your devices and enjoy crystal clear audio without the hassle of cables. Take control of your creativity and elevate your music to the next level with these wireless portable studio monitors.

Complete wireless freedom

Battery powered with 20H+ of playback time
W+ Link ultra low latency wireless audio for music creation - only 16ms of latency, uncompressed audio and robust connection
Complete wireless freedom - both audio and power cables

Reference monitor sound

2 way active monitor featuring a 4 inch high-excursion woofer and 1 inch silk-dome tweeter
Precision tonal accuracy over a flat +/-2dB frequency response from 50Hz to 20kHz
Bass vent and boosting EQ tuned to provide a clean bass extension down to 40Hz
Precise soundstage and point-source accuracy provided by the minimal front panel design,
incorporating a directivity controlling tweeter waveguide
Stage monitor design enables you to place the speaker upright or angled horizontally, to
optimise your sound field in changing workspaces
Shape UNIT-4's sound to your environment or preference using the AIAIAI app customisable
5-band EQ

Portable, compact and rugged

Size and weight of only 3 litres / 2.5kg
Rear bass vent designed to be a comfortable carrying handle when on the move
Removable steel grille provides sturdy protection for the woofer and tweeter

Connect to everything

W+ Link - use the X02 transmitter for low latency wireless music creation
Bluetooth 5.2 - listen to music from your Bluetooth enabled devices
Cable - connect directly via 3.5mm mini-jack and 6.3mm balanced TRS inputs

Responsible design

Main components produced from 100% recycled plastics, from post-consumer sources
Designed for disassembly and engineered from the inside out
Mechanically assembled in a glue-free design
Take the whole speaker apart using two screwdrivers
Replaceable components including battery and drive units
Future-proofed for new technologies with upgradable wireless electronics

In the box:

UNIT-4 Wireless+ 2pcs

Portable and ultra-low latency wireless studio monitors. Includes protective steel grills and power supplies with regional cord.

X02 Transmitter - 1pcs

USB-C W+ Link transmitter. Transmits to 2 x W+ Link devices simultaneously. Includes a 0,2m USB-C to USB-C cable in neon.

Protective pouch 2pcs

UNIT-4 protective pouch in black. Made from compostable fabric material.

Tech Specs

Freq. range: 40Hz to 40kHz (-10dB)
Freq. response: 50Hz to 20kHz (+/-2dB)
Peak SPL: 105 dBSPL
Woofer: 4-inch high excursion paper cone woofer
Tweeter: 1-inch silk dome tweeter
Amplifier power: 2 x 30W continuous, 2 x 80W peak
W+ Link latency: 16 ms
Bluetooth version: 5.2
Analogue inputs: 3.5mm mini-jack + 6.3mm TRS balanced
Playback time on battery: 20 hours
Charging time: 2 hours
Battery capacity: 77 Wh
Read more
 1 in stock $724.29
Akai Professional MIDI Mix High-Performance Portable Mixer & DAW Controller (B-STOCK)
Cat: 1010252 Rel: 01 Jan 90
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Total Mixing Performance in a Small Package:

MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you'd like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved:

Akai Professional's portable MIDImix solves this problem completely. With Akai Professional's famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer's settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW's functionality. This is great - it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like It:

Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site - at the same time.
Read more
MRP:$89.48 SAVE 13%
 1 in stock $77.79
Aodyo Anyma Phi Hybrid Monophonic Physical Modeling Synthesiser (white)
Cat: 827737 Rel: 12 Jul 21
 
Hybrid monophonic synthesizer
Notes: Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!
Read more
MRP:$524.27 SAVE 18%
 1 in stock $431.62
Arturia MicroFreak Stellar 25-Key Paraphonic Hybrid Synthesiser & Step Sequencer (limited edition) (B-STOCK)
Cat: 1010714 Rel: 01 Jan 90
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Stellar edition of the fantastic MicroFreak adds new features as well as a limited-edition paint job. Digital voices feed into the analogue filter to create a versatile hybrid sound engine.

Supplier's Notes:
MicroFreak Stellar is a hybrid synthesizer that combines digital oscillators, analogue filters, quirky modulation, a uniquely flat PCB keybed, and expressive sequencing with a subtly out-of-this-world aesthetic design.

Interplanetary synth explorer

Discover the same loveable hybrid beast that sent the synth world into a spin, but primed for launch and ready for an interplanetary sonic voyage. MicroFreak Stellar features the same inspiring, bonkers sound but embellished with a unique space-age design.

Digital, wavetable, sampling, granular...

Treat yourself to only the weirdest & most wonderful paraphonic synth sounds with MicroFreak's multimode sound engine. Choose from numerous algorithms, including Wavetable, Chord, 4 new Sample & Granular engines and many more, and immediately customize your patches with 4 intuitive con-trols and real-time visual feedback.

Multi-mode analogue filter

Unlock truly unique hybrid tones by combining MicroFreak's digital sound engines with a crunchy resonant analogue filter, inspired by the classic Oberheim SEM. With low-pass, band-pass, and high-pass modes, you can make this 'Freak whisper, scream, or launch into self-oscillating orbit.

Modulation matrix

Quickly rewire MicroFreak's architecture and delve deep into complex sound design with its modulation matrix, offering up to 7 simultaneous destinations and 5 sources, including an ADSR envelope, cycling envelope, and 6-shape LFO.

Sequencing & randomization

Blur the lines between sequencing & arpeggiation and create spontaneous melodies, motifs, and rhythmic patterns on the fly. MicroFreak encourages musical exploration, expression, and evolution with its unique Spice & Dice randomization feature, ribbon controller, and 4 lanes of automation.

A unique keybed

Change the way you play and unlock fresh musical expression with MicroFreak's distinct PCB keyboard. It's flat, it's fast, and it's fit for everything from lightning-fast solos to instant arp creation; not only is it pressure sensitive, but it offers poly-aftertouch too!

What's in the box

Box content

MicroFreak Unit
Universal PSU
Registration card
2x MIDI port adapters

Instrument dimensions

Size : 12.2 x 9.2 x 2.2 inches (311 x 233 x 55mm)
Weight : 2.3 lbs. (1.02 Kg)
Read more
MRP:$346.35 SAVE 14%
 1 in stock $297.14
Befaco 200cm Patch Cables (green, pack of 3)
Cat: 668665 Rel: 09 Nov 17
 
3 x high quality green patch cables
Notes: Pack of high Quality patch cables. Not too stiff, not too loose!

One colour for each size make Befaco patch cables just perfect to keep them organized!

This pack contains 3 high quality green patch cables.
Read more
MRP:$12.63 SAVE 10%
 1 in stock $11.32
Befaco Bananuts Anodised Aluminium Custom Minijack Nuts (black, pack of 25)
Cat: 739913 Rel: 20 Sep 19
 
Pack of 25 Bananuts in black colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
MRP:$12.63 SAVE 13%
 2 in stock $11.05
Befaco Instrument Interface v2  Audio Preamp Module With Envelope Follower
Befaco Instrument Interface v2 Audio Preamp Module With Envelope Follower (envelope generator/preamp/external synth module)
Cat: 749081 Rel: 25 Oct 19
 
Eurorack instrument interface with Neutrik combo connector - 8HP
Notes: Instrument Interface is a Eurorack pre-amp capable of bringing any type of audio signal to modular levels, thanks to its amplification circuit.

The module can drive regular and condenser microphones (+48V Phantom Powered), as well as Instrument and Line signals with a very low distortion ratio.

Going further from the regular re-amp operation, Instrument Interface offers some additional extra functions like a Trig/Gate extractor and Envelope Follower circuits, allowing you to use the character of your audio signal in more creative ways.
Read more
 1 in stock $215.81
Click for better price!
or call +44 20 7424 1960
quote 749081
Befaco VCMC Voltage Controlled MIDI Controller Module
Cat: 739915 Rel: 24 Oct 19
 
Full voltage-controlled instrument interface
Notes: Interesting MIDI option for Eurorack. Eight faders and buttons, mappable to MIDI note, CC and lots more parameters, then controllable using CV and gate signals. Versatile.

Supplier's notes:
A fully editable MIDI controller with eight faders and push buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured independently for further control.

Each control on VCMC can be edited on its OLED screen and will be output either via DIN-5 or USB as a class compliant MIDI device.

- Current needs: +12V: 64mA, -12V: 12mA
- Width: 20 HP
- Depth: 30 mm
- Aluminium, heat-treated front panel
Read more
 1 in stock $308.45
Click for better price!
or call +44 20 7424 1960
quote 739915
Befaco Zip Ties (pack of 9)
Cat: 997563 Rel: 29 Feb 24
 
Pack of 9 zip ties
Notes: Nine zip cable ties in 3 different colours. Light Grey, Dark Grey, and Red. Each pack contains 3 cable ties of each colour.
Read more
 4 in stock $3.69
Boss DD-8 Digital Delay Effects Pedal
Cat: 996038 Rel: 29 Feb 24
 
Digital delay effects pedal
Notes: Introducing the DD-8, the most wide-ranging and feature-rich BOSS compact series delay ever. This loaded pedal delivers more of everything-more great sounds, more delay time, more control options, and more connectivity. And it does it all in a standard BOSS pedal that slides easily into any mono or stereo setup. Eleven modes provide delay colours from basic to exotic, plus a looper with unlimited overdub capability and external control support. For maximum versatility in a minimum amount of space, there's no better delay stomp than the DD-8.

Equipped with a diverse selection of delays, the DD-8 packs impressive sonic range into one small pedal. Clean digital delays, vintage analogue and tape types, and modulation echo are available, plus specialty delays like shimmer and reverse. There's a new Warm type for softer echo tones, and a +RV type that blends delay and reverb together. Warp is perfect for dynamic ambient textures, while the new GLT type is great for glitchy rhythmic effects.

Everything sounds bigger and better in stereo, and the DD-8 delivers with full stereo I/O support and your choice of three output modes. The default independent mode provides linked parallel delays on the left and right channels, allowing you to maintain the true balance of stereo input sources in the effect sound. There's also a panning mode for ping-pong delay effects, and a wide stereo mode for enhanced spatial depth.

The DD-8's extensive real-time delay options help bring your music to life. You can tap in tempos with the onboard pedal switch, and control the Warp and GLT modes for unique expressive effects. Adding one or two footswitches unlocks more creative possibilities, like on-demand tap tempo, extended looper control, and a cool Twist effect for soaring echo sounds. Alternately, an expression pedal can be used for continuous control of level, feedback, or delay time-or all of them at once.

Having a looper on your pedalboard is a handy thing-it's great for practice, checking sounds at gigs, and creating on-the-fly backing while performing. The DD-8's looper mode has you covered, so you don't have to take up precious space with a dedicated pedal. All looper functions can be controlled with the onboard switch, providing all-in-one operation. But if you prefer to work with extended controls, just connect one or two footswitches to operate the looper's stop and clear functions externally.

The DD-8's inputs and outputs have smart functionality, allowing you to set the pedal for any application simply by connecting cables in different ways. A variety of mono and stereo connections are supported, including discrete dry and effect outputs for wet/dry setups. It's even possible to defeat the dry signal entirely, perfect for delay-only blending in a parallel effects loop.

Analog-Classic analogue BBD delay sound.
Standard-Clear digital delay.
Tape-Vintage tape-based delay sound.
Warm-Digital delay with a softer sound.
Reverse-Backwards delay for cool psychedelic effects and other unique tones.
+RV-Digital delay with reverb added.
Shimmer-Pitch-shifted delay for lush, shimmering textures.
Mod-Digital delay with modulation added on the repeats.
Warp-Unique delay with expressive pedal control. Holding the pedal switch increases feedback and level, allowing you to create ambient swell effects.
GLT-Newly developed delay mode that creates glitchy machine-gun effects when the pedal switch is pressed. Adjust the Feedback and Time knobs for a wide variety of sounds.
Loop-Loop recorder with overdub capability and up to 40 seconds of recording time with mono input (20 seconds with stereo input).

Specifications

Nominal Input Level: -20 dBu
Input Impedance1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls: MODE knob, TIME knob, FEEDBACK knob, E.LEVEL(Effect Level) knob, CARRYOVER switch
Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors: INPUT-A(MONO)/INPUT-B jack: 1/4-inch phone type
OUTPUT-A(MONO)/OUTPUT-B jack: 1/4-inch phone type
TEMPO/EXP jack: TRS 1/4-inch phone type
DC IN jack

Power Supply:
Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)

Current Draw: 100 mA

Expected battery life under continuous use
Alkaline: Approx. 3.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V, 6LR61)
Options (sold separately)
AC adaptor: PSA series
Footswitch: FS-5U, FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

Size & weight
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 440 g / 1 lb
Read more
MRP:$180.02 SAVE 20%
 1 in stock $144.22
Boss DS-1 Distortion Effects Pedal
Boss DS-1 Distortion Effects Pedal (distortion effects pedal)
Cat: 996884 Rel: 15 Feb 24
 
Distortion effects pedal
Notes: The Benchmark in Guitar Distortion

The DS-1 Distortion is a true icon in the world of guitar effects. Introduced in 1978, BOSS's first distortion pedal defined a bold new sound, delivering hard-edged attack and smooth sustain that's been a staple of players for generations. The DS-1 is the top-selling BOSS compact pedal ever, and its original, unchanged design continues to inspire the creation of great music everywhere. The classic DS-1 tone is behind the signature sounds of numerous rock legends, and is ready to fuel your own signature sound today.

Genre-Defining Distortion

Before the DS-1, most distortion pedals produced harsh, buzzy tones and muddy sound at high gain settings. In 1978, BOSS engineers changed all that by developing a unique distortion circuit for the DS-1 that produces tight, hard-edged gain with rich harmonics while retaining the unique characteristics of different guitars and playing techniques. Hard rock, metal, and punk styles began to flourish in the '70s and '80s, and the DS-1's tone had a defining influence on these genres. That trend has endured through multiple generations, and players around the world continue to seek out the classic DS-1 sound.

Gain from Mild to Heavy

From its modest three-knob interface, many different sound colours can be coaxed from the DS-1. Its pioneering two-stage circuit incorporates both transistor and op-amp gain stages. This approach is critical to the DS-1's characteristic low-frequency fullness, which is loved by guitarists that play heavy music genres. The distortion knob offers an extremely wide range, from a mild boost for driving amps and pedals to full-throttle gain for monster rock riffs.

Powerful Tone Shaping

Unlike typical tone controls that only cut highs, the DS-1's tone circuit features an innovative design that offers far more range. Turning the knob clockwise increases highs and decreases lows, while going counter-clockwise has the opposite effect. This lets you dial in everything from tight, cutting rhythm sounds to smooth, fat lead voices. The tone control is particularly effective for maintaining low-end definition when using the DS-1 as a booster with vintage-style amps, which often sound muddy when driven with other distortion pedals.

Nominal Input Level-20 dBu
Input Impedance: 1 M ohm
Nominal Output Level-20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Controls: Pedal switch, TONE knob, LEVEL knob, DIST knob
Indicator: CHECK indicator (Used for indication of check battery)
Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN jack
Power Supply:
Alkaline battery (9 V, 6LR61) or Carbon-zinc battery (9 V, 6F22)
AC adaptor (PSA series: sold separately)
Current Draw10 mA

Expected battery life under continuous use:
Carbon: Approx. 50 hours
Alkaline: Approx. 80 hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Carbon-zinc battery (9 V, 6F22)
Option (sold separately)AC adaptor (PSA series)

Size & weight (incl. battery)
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height59 mm / 2-3/8 inches
Weight: 360 g / 13 oz
Read more
MRP:$77.90 SAVE 19%
 1 in stock $63.15
Boss Dual Cube LX 10W Guitar Amplifier
Cat: 997584 Rel: 15 Feb 24
 
Guitar amplifier
Notes: The Classic CUBE, Evolved for Maximum Flexibility

For over four decades, CUBE amplifiers have brought exceptional value to musicians everywhere, offering great sound and versatile features in portable, go-everywhere designs. The DUAL CUBE LX Guitar Amplifier carries on this long tradition, evolved with the latest BOSS advancements for unmatched flexibility. This desktop powerhouse is the ultimate guitar amp for home practice and jamming with friends. And with a generous array of connectivity options, its range extends to performing, recording, and many other applications.

Meet the Moment

With its compact size and authentic BOSS tones, the DUAL CUBE LX delivers instant gratification for everyday playing at home. And its ultra-flexible design lets you go much further when you want, providing advanced features that reach well beyond the capabilities of other desktop amps.

Practice and Jam Anywhere

Indoors and out, enjoy big, immersive sound with custom-designed stereo speakers and versatile power with the included AC adaptor or eight AA batteries.

Perform On Stage

Use the stereo Line Out jacks to directly connect to a PA system and perform with pro BOSS amp sounds, complete with mic'd cab emulation and expansive stereo effects.

Record to Your Favourite DAW

Use the DUAL CUBE LX to capture mix-ready sounds in music software on a computer or mobile device via USB or i-CUBE-Link.

Elevate Your Livestreams

With the Phones/Rec jack and mic volume control, you can capture your voice with a headphones mic and send it to the USB and i-CUBE Link outputs along with your guitar sounds.

Play Along with Backing Music

The DUAL CUBE LX offers many ways to play along with backing music from a mobile device or computer, including a stereo aux input, USB and i-CUBE Link Loopback, and an optional Bluetoothr adaptor.

Authentic Amp Tones

With its finely tuned stereo speaker system, the DUAL CUBE LX produces full, punchy guitar tones that belie the amp's small footprint. Choose from eight versatile amp types, all with natural feel and organic response honed with decades of BOSS amp development. Whatever your style or skill level, you'll find expressive sounds to build techniques and deliver inspired performances. There's also a dedicated mic preamp type, allowing you to use the amp as a portable vocal PA system.

Onboard BOSS Effects

The DUAL CUBE LX includes a variety of BOSS stereo and mono effects to enhance your sound. Out of the box, you can spice up tones with four mod effect types or Heavy Octave and add ambience with delay or two types of reverb. If you want to go even deeper, it's possible to change out effects and adjust settings via the DUAL CUBE LX Editor.

Deep Sound Customization

The intuitive panel controls on the DUAL CUBE LX make it easy to craft compelling sounds in the moment. Each amp type includes three user memories, allowing you to store all the knob settings for quick recall. And with the DUAL CUBE LX Editor, there's a world of additional creative power to explore. Select different amp and effect variations, adjust detailed parameters, and more from your Mac or Windows computer.

Stereo In for Modelers and Pedalboards

The DUAL CUBE LX features a special Stereo In amp type for connecting stereo devices, complete with advanced spatial processing that makes it sound like you're playing through a much larger cabinet. By default, it provides rich, full-range sound for an amp/effects processor such as the GT-1000, GT-1000CORE, GX-100, GT-1, or IR-200. With the DUAL CUBE LX Editor, you can alternately choose a neutral guitar amp tone inspired by the famous Roland JC-120, giving you an ideal platform for exploring the stereo capabilities of pedals like the BOSS 500 and 200 series.

Expand Your Possibilities

With optional FS-series footswitches, you can operate the onboard looper and switch memories while performing.


Specifications

Rated Power Output: 10 W (5 W+5 W)
Nominal Input Level: GUITAR/STEREO IN L, R: -10 dBu (1 M ohm), i-CUBE LINK/AUX IN: -20 dBu (15 k ohm)
Nominal Output Level: LINE OUT L/MONO, R: -10 dBu
Speakers: 10 cm (4 inches) x 2
Controls: POWER switch, AMP TYPE knob (ACOUSTIC SIM, JC CLEAN, US COMBO, BRIT COMBO, HI-GAIN STACK, METAL STACK, EXTREME, MIC, STEREO IN), MEMORY button, GAIN knob, VOLUME knob, BASS knob, MIDDLE knob, TREBLE knob, EFFECTS knob (CHORUS, FLANGER, PHASER, TREMOLO, HEAVY OCTAVE), DELAY/REVERB knob (DELAY, REVERB, SPRING), TAP button, MIC VOL knob, MASTER knob, LOOPBACK switch (i-CUBE LINK/AUX IN), LOOPBACK switch (USB)
Indicators: POWER, MEMORY, TAP, REC, PLAY, DUB

Connectors: GUITAR jack/STEREO IN L, R jacks: 1/4-inch phone type, i-CUBE LINK/AUX IN jack: Stereo Miniature phone type (Stereo, CTIA), FOOT SW jack: 1/4-inch TRS phone type, Bluetooth ADAPTOR connector: Dedicated connector, USB port: USB B type,, DC IN jack

PHONES/REC OUT jack: Stereo, Miniature phone type (Stereo, CTIA), LINE OUT L/MONO, R jacks: 1/4-inch phone type

Power Supply: AC adapter (DC 9 V), Alkaline battery (AA, LR6) x 8
Rechargeable Ni-MH battery (AA, HR6) x 8
Current Draw360 mA

Expected battery life under continuous use
Alkaline battery: Approximately 8 hours
Rechargeable Ni-MH battery: Approximately 10 hours (*1)

*1 When using batteries having a capacity of 2,500 mAh.
* These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
Accessories: Owner's Manual, Leaflet USING THE UNIT SAFELY, AC adaptor, Power cord, Mini cable (4-pole miniature phone type)
Options (sold separately)
Footswitch: FS-5U, FS-6, FS-7
Bluetoothr Audio MIDI Dual Adaptor (MODEL BT-DUAL)
Wireless MIDI Expression Pedal: EV-1-WL
Size & weight

Width: 341 mm / 13-7/16 inches
Depth: 162 mm / 6-7/16 inches
Height: 215 mm / 8-1/2 inches
Weight (excluding AC adaptor): 3.3 kg / 7 lbs 5 oz
Read more
MRP:$190.55 SAVE 15%
 1 in stock $162.12
Boss RC-1 Loop Station Effects Pedal
Cat: 996011 Rel: 19 Feb 24
 
Loop station effects pedal
Notes: The BOSS RC-1 is Boss' simplest and most user-friendly Loop Station ever, and it's a ton of fun! Since the RC-20 Loop Station was first released in 2001, BOSS has led the way by continually releasing new looping products. Though they've been used and enjoyed by various looping artists and performers, BOSS still pursued an easier and more affordable solution. The RC-1 is a straightforward looper that is easy to operate. Experience the fun of looping when you record, playback, overdub, and undo or redo loops using this compact BOSS stompbox. And of course, the RC-1 retains the BOSS quality and performance that musicians around the world have come to expect and rely on.

On the top panel, there is a new and innovative loop indicator, which consists of a 24-segment LED laid out in a circular pattern. You can quickly and easily determine the current status of the Rec/Overdub/Play modes. With a maximum 12 minutes of stereo recording time, the RC-1 is capable of capturing any extended performance that you can create or imagine! The stereo in/out jacks can be used with stereo effects and amplifiers. Additionally, they allow you to connect stereo instruments, such as synthesizers. Other convenient features include battery and AC power, as well as flexible external footswitching capabilities. The RC-1 is an especially great partner to start enjoying looping!

Specifications

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Maximum Recording Time: Approximately 12 minutes

Controls: Pedal switch, LEVEL knob
Indicators: CHECK indicator, LOOP indicator

Connectors:
INPUT A (MONO) jack: 1/4-inch phone type, INPUT B jack: 1/4-inch phone type, OUTPUT A (MONO) jack: 1/4-inch phone type, OUTPUT B jack: 1/4-inch phone type, STOP/UNDO jack: 1/4-inch TRS phone type, DC IN jack
Power Supply: Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 95 mA

Expected battery life under continuous use (These figures will vary depending on the actual conditions of use.)
Alkaline: Approx. 3 hours

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Alkaline battery (9 V, 6LR61)

Options (sold separately) AC adaptor: PSA series
Footswitch: FS-5U, FS-6, FS-7

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: 430 g / 1 lb
Read more
MRP:$123.17 SAVE 10%
 1 in stock $110.54
Click for better price!
or call +44 20 7424 1960
quote 996011
Boss RE-2 Space Echo Effects Pedal
Cat: 996050 Rel: 19 Feb 24
 
Space echo effects pedal
Notes: Introduced in 1974 and produced for over 14 years, the Roland RE-201 Space Echo stands among the most legendary and sought-after effect units in music history. Known for its distinctive rhythmic echo sounds, warm character, and highly playable sonic quirks, this tape-based classic continues to inspire musicians, producers, and audio mixers over four decades on.

With the RE-2, the authentic sound and behaviour of the Space Echo is now available in the famous BOSS compact series for the first time. Backed by intensive R&D and our latest innovations, the RE-2 delivers the coveted magic of the RE-201 in a pedalboard-friendly footprint-realized in flawless detail by the company that designed the original.

When tape-based echoes were standard in the music world, the RE-201 was a leader in its class. Equipped with three evenly spaced tape heads and a spring reverb tank, it could produce everything from clean, single delays to dense, rhythmic echoes and ambient washes. The RE-201's appealing sound was influenced by many factors, from the warm compression of magnetic tape saturation to the evolving modulation produced by motor speed fluctuations, friction, and other elements. Last but not least, analogue preamp circuitry was a key ingredient in the Space Echo's rich sonic recipe.

In developing the RE-2 and its big brother, the RE-202, BOSS engineers have fully reproduced all the complex, non-linear behaviours that contribute to the RE-201's immortal character. We carefully analysed several vintage RE-201s, including a pristine original unit from the BOSS and Roland factory archive. Everything that influences the sound has been recreated with all-new algorithms, including the tape path, record/playback mechanism, motor variations, preamp coloration, spring reverb character, and more.

The RE-2 squeezes the complete sonic character of the RE-201 into the classic BOSS compact pedal format. The 11-position mode selector lets you dial in different virtual tape heads with or without spring reverb, and you can balance the echo/reverb blend with independent level knobs. Every behaviour is accurately replicated, such as the gradual pitch change that occurs with Repeat Rate tweaks and the runaway feedback that happens when maxing the Intensity knob. And with the expressive Wow & Flutter control, you can conjure all the natural modulation characteristics that are essential to the Space Echo sound.

The RE-2 takes the Space Echo experience further with versatile features for today's music. Delay time has been doubled and tap tempo control is supported, and there's a cool Twist function for creating evocative special effects as you perform. For the dry sound, you can choose between the warm and fat RE-201 preamp tone or a clean signal with zero processing. Full stereo I/O is available, and it's possible to mute the dry signal for parallel effect setups and studio use. The RE-2 also supports expanded control via external footswitches or an expression pedal, including continuous pedal control of multiple panel functions at once.

Specifications

Modes: 11 modes
Nominal Input Level: INPUT A(MONO), INPUT B: -20 dBu
Maximum Input Level: INPUT A(MONO), INPUT B: +7 dBu
Input Impedance: INPUT A(MONO), INPUT B: 1 M ohm
Nominal Output Level: OUTPUT A(MONO), OUTPUT B: -20 dBu
Maximum Output Level: OUTPUT A(MONO), OUTPUT B: +7 dBu
Output Impedance: OUTPUT A(MONO), OUTPUT B: 1 k ohm
Recommended Load Impedance: OUTPUT A(MONO), OUTPUT B: 10 k ohms or greater
Bypass: Buffered bypass

Controls: MODE knob, REPEAT RATE knob, WOW & FLUTTER knob, INTENSITY knob, TONE knob, ECHO knob, REVERB knob, CARRYOVER switch
Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors: INPUT A(MONO) jack, INTPUT B jack, OUTPUT A(MONO) jack, OUTPUT B jack: 1/4-inch phone type
CTL/EXP jack: 1/4-inch TRS phone type
DC IN jack
Power Supply: Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw: 75 mA

Expected battery life under continuous use: Alkaline: Approx. 4.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V, 6LR61)
Options (sold separately)AC adaptor: PSA series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: (including battery)450 g / 1 lb
Read more
MRP:$233.71 SAVE 20%
 1 in stock $187.39
Boss RE-202 Space Echo Effects Pedal
Cat: 997454 Rel: 01 Mar 24
 
Space echo effects pedal
Notes: Based on the legendary Roland Space Echo, the RE-202 brings tape-style delay effects into the future. Classic vintage sound in a modern, user-friendly package.

Supplier's Notes:
A Masterpiece Returns in the Modern Era

Introduced in 1974, the Roland RE-201 Space Echo stands among the most legendary and sought-after effect units ever produced. This tape-based classic remained in production for over 14 straight years, and its distinctive rhythmic echo sounds, warm character, and highly playable sonic quirks still inspire musicians, producers, and audio mixers over four decades on.

Backed by intensive R&D and Boss' latest innovations, the RE-202 faithfully delivers the authentic sound and behaviour of the Space Echo like never before. Built by the company that designed the original, this advanced pedal captures the RE-201's magic in flawless detail, from the magnetic tape and motor properties to the vibrant spring reverb and colourful preamp circuit. And to take things even further, Boss have expanded the vintage Space Echo experience with lots of new features tuned for today's music.

Tape Echo Magic

Tape echo was the first delay effect and one of the first effect processors available for electronic musicians. In contrast with today's CPU-based digital units, a tape echo is a simple machine that uses a motor to pull magnetic tape across one or more record/playback heads. Warm, full, and dynamic, the tape echo sound is influenced by many factors. The ever-changing input level colours the sound with varying amounts of tape saturation and compression. In addition, motor speed fluctuations, friction, wow and flutter, and other elements introduce an appealing modulated character that's subtle and continually evolving.

RE-201 Space Echo: Simply Legendary

The RE-201 was a benchmark Roland product and one of the leading tape echo units of its era. It featured three evenly spaced heads that produced a wider range of echo effects than typical single-head designs, plus an innovative free-running tape system that provided superior performance with minimal tape wear. Grab-and-go controls enabled quick access to clean, single delays or various head combinations for dense, rhythmic echoes. A spring reverb tank was included too, making the RE-201 a one-stop shop for quality ambience effects. Last but not least, analogue preamp circuitry was another key ingredient in the Space Echo's rich sonic recipe.

A Masterpiece Reborn

Realized through the latest technologies and exhaustive analysis of several vintage RE-201s-including a pristine original unit from the BOSS and Roland factory archive-the RE-202 brings the complete Space Echo experience to life in a versatile modern pedal.

While previous BOSS designs captured the true sonic flavour and essential characteristics of the Space Echo, new advancements have allowed us to go much deeper than ever before. With the RE-202, Boss' engineers have fully reproduced all the complex, non-linear behaviours that contribute to the RE-201's immortal character. Everything that influences the sound was carefully examined and recreated with all-new algorithms, including the tape path, record/playback mechanism, motor variations, preamp coloration, tape age, spring reverb character, and more.

Retro Sound at Your Fingertips

The RE-202 delivers the full vintage vibe of the RE-201-without the need for regular tape replacement and hardware maintenance. All the core controls of the original are here, including the iconic 12-position mode selector. Every behaviour is replicated with complete accuracy, such as the gradual pitch change that occurs when the Repeat Rate knob is tweaked, or the cool runaway feedback that happens when the Intensity knob is maxed.

With selectable tape age and variable controls, you can dial in everything from a brand-new Space Echo to the worn character and quirks of a well-loved vintage piece. The Saturation control has been carefully calibrated based on the actual magnetic tape and preamp behaviours of the RE-201, with the sound becoming warmer and more compressed as you turn up the knob.

Sampling Frequency: 48 kHz

AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converter.

DA Conversion: 32 bits
Processing: 32-bit floating point
Modes: 12 modes
Memory127 + Manual
Nominal Input Level: INPUT A/MONO, INPUT B: -10 dBu
Maximum Input Level: INPUT A/MONO, INPUT B: +7 dBu
Input Impedance: INPUT A/MONO, INPUT B: 1 M ohm
Nominal Output Level: OUTPUT A/MONO, OUTPUT B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, OUTPUT B: +7 dBu
Output Impedance: OUTPUT A/MONO, OUTPUT B: 1 k ohm
Recommended Load Impedance: OUTPUT A/MONO, OUTPUT B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY switch, TAP switch, SATURATION knob, WOW & FLUTTER knob, MODE SELECTOR knob, BASS knob, TREBLE knob, REVERB VOL knob, REPEAT RATE knob, INTENSITY knob, ECHO VOL knob, MEMORY button, INPUT button, TAPE button

Connectors: INPUT A/MONO jack, INTPUT B jack, OUTPUT A/MONO jack, OUTPUT B jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)
Power Supply: AC adapter
Current Draw: 140 mA
Accessories: AC adapter, Owner's Manual, Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Rubber foot

Options (sold separately)
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 192 mm / 7-9/16 inches
Depth: 133 mm / 5-15/64 inches
Height: 52 mm / 2-3/64 inches
Height (including rubber foot): 53 mm / 2-3/32 inches
Weight: 860 g / 1 lb 15 oz
Read more
MRP:$375.83 SAVE 20%
 2 in stock $300.02
Chord OD-50 Overdrive & Distortion Effects Pedal
Cat: 965843 Rel: 03 Oct 23
 
Overdrive and distortion effects pedal.
Notes: A versatile overdrive pedal for guitar with separate Gain, Tone and Level controls. A wide range of tones are available from natural and open sounding mild drive tones to heavier saturated distortion with all points in between to cover different music styles.

Gain, Tone and Level adjustment
9V battery or optional DC adaptor operation
Power supply9V battery (PP3 included) or optional DC adapter
Construction: Aluminium housing with rubber base
Controls: Gain, Tone and Level
Dimensions: 115 x 68 x 47mm
Weight: 275g

In the box

The box for this item contains:

OD-50 guitar effect pedal
PP3 battery
Read more
MRP:$36.85 SAVE 17%
 1 in stock $30.72
Critter & Guitari 201 Pocket Piano 6-Operator FM Synthesiser & Sequencer (blue)
Cat: 972511 Rel: 30 Oct 23
 
6-operator FM synthesiser and sequencer with built-in speaker and battery power.
Notes: The Pocket Piano returns and is better than ever! Like its predecessor, the 201 Pocket Piano is fun, portable, and packed with a medley of musical magic!

The 201 is nearly pocket size, but don't let its small size fool you! Under the hood is some powerful circuitry that will allow you to explore your musical ideas quickly and easily.

Description

Sounds

At the heart of the 201 are six sound engines providing a wide range of sonic texture. Use the shift key to select an engine. There is a little bit of everything: chiptune style waveforms, analogue style filters, drum samples, realistic physical instrument models, and even a human vocal synthesizer. Use the three centre control knobs to further explore the sounds. Dial in the right amount of sustain, or adjust the tone. Or turn the 'surprise' knob if you are brave!

Patterns

Play directly on the keyboard or turn on one of the pattern generators. From simple octave arpeggiation to randomizing polyphonic patterns you will be inspired by the notes coming out of the 201! Use the first control knob to set the pattern's tempo.

The pattern generators also work great for creating drum beats using the drum samples!

Sequencer

If you like the way something sounds, recording it is just a button press away! There is a handy metronome that you can play/record along with. When the sequence is playing back you can endlessly change the pattern and synth engine. When you get it just right, hit the save button. You can save 'unlimited' sequences (well... not really unlimited, but many thousands). Then recall saved sequences easily using the navigation buttons.

Connectable

The 201 wants to be friends with all your other gear! It works great with guitar effects pedals and amps. With MIDI in and out you can control other synthesizers with the 201, or the other way around. A USB-C connector lets you easily move files on and off the instrument.

Open source

Critter & Guitari is committed to making musical electronics that are open platforms. Like the Organelle and EYESY instruments, the 201 is built entirely with Open Source software.

Inside, the 201 uses a combination of Pure Data and Faust musical programming environments. Users are invited to modify or create new sound engines!

Quality materials

The 201 is built to last. It features an anodized aluminium enclosure and maple buttons for a nice, tactile feel. It's assembled and tested by hand at Critter & Guitari's shop in Brooklyn, NY.

Design/Specs

Physical characteristics:
Size: 9.3" x 3.4" x 2.1" / 23.6 x 8.6 x 5.3 cm.
Height includes knobs.
Weight: 18oz / 500g.
Enclosure Top: Powder Coated Aluminium w/ silkscreen
Enclosure Bottom: Powder Coated Aluminium
Rock Maple Keyboard Keys

Input/output:
Audio Output: 14" Monophonic Line Output Jack
Speaker Output: Built-in 3W Speaker
MIDI Input: 1/8" Mini MIDI In jack (TRS Type A connection)
MIDI Output: 1/8" Mini MIDI Out jack (TRS Type A connection)

Processing & storage:
ARM Cortex-A7 processor at 900 MHz
512 MB RAM
An included 8GB micro SD card stores the OS and supplemental files such as synth modes, patterns, and presets.

Power:
External Power via USB-C Port
3x 'AA' batteries can be used as Internal battery power for portability. The battery holder can be found on the bottom face of the 201. Batteries not included.

Included items:
1x 201 Pocket Piano
1x External Power Supply with USB-A Port
1x Power Cable: USB-A to USB-C

Resources:
Manual (for additional troubleshooting and support, visit the forum)
More videos on YouTube
Critter & Guitari Forum
User Modes & Patterns on Patch Storage
Read more
 1 in stock $390.56
Click for better price!
or call +44 20 7424 1960
quote 972511
Critter & Guitari 201 Pocket Piano 6-Operator FM Synthesiser & Sequencer (pink)
Cat: 972513 Rel: 30 Oct 23
 
6-operator FM synthesiser and sequencer with built-in speaker and battery power.
Notes: The Pocket Piano returns and is better than ever! Like its predecessor, the 201 Pocket Piano is fun, portable, and packed with a medley of musical magic!

The 201 is nearly pocket size, but don't let its small size fool you! Under the hood is some powerful circuitry that will allow you to explore your musical ideas quickly and easily.

Description

Sounds

At the heart of the 201 are six sound engines providing a wide range of sonic texture. Use the shift key to select an engine. There is a little bit of everything: chiptune style waveforms, analogue style filters, drum samples, realistic physical instrument models, and even a human vocal synthesizer. Use the three centre control knobs to further explore the sounds. Dial in the right amount of sustain, or adjust the tone. Or turn the 'surprise' knob if you are brave!

Patterns

Play directly on the keyboard or turn on one of the pattern generators. From simple octave arpeggiation to randomizing polyphonic patterns you will be inspired by the notes coming out of the 201! Use the first control knob to set the pattern's tempo.

The pattern generators also work great for creating drum beats using the drum samples!

Sequencer

If you like the way something sounds, recording it is just a button press away! There is a handy metronome that you can play/record along with. When the sequence is playing back you can endlessly change the pattern and synth engine. When you get it just right, hit the save button. You can save 'unlimited' sequences (well... not really unlimited, but many thousands). Then recall saved sequences easily using the navigation buttons.

Connectable

The 201 wants to be friends with all your other gear! It works great with guitar effects pedals and amps. With MIDI in and out you can control other synthesizers with the 201, or the other way around. A USB-C connector lets you easily move files on and off the instrument.

Open source

Critter & Guitari is committed to making musical electronics that are open platforms. Like the Organelle and EYESY instruments, the 201 is built entirely with Open Source software.

Inside, the 201 uses a combination of Pure Data and Faust musical programming environments. Users are invited to modify or create new sound engines!

Quality materials

The 201 is built to last. It features an anodized aluminium enclosure and maple buttons for a nice, tactile feel. It's assembled and tested by hand at Critter & Guitari's shop in Brooklyn, NY.

Design/Specs

Physical characteristics:
Size: 9.3" x 3.4" x 2.1" / 23.6 x 8.6 x 5.3 cm.
Height includes knobs.
Weight: 18oz / 500g.
Enclosure Top: Powder Coated Aluminium w/ silkscreen
Enclosure Bottom: Powder Coated Aluminium
Rock Maple Keyboard Keys

Input/output:
Audio Output: 14" Monophonic Line Output Jack
Speaker Output: Built-in 3W Speaker
MIDI Input: 1/8" Mini MIDI In jack (TRS Type A connection)
MIDI Output: 1/8" Mini MIDI Out jack (TRS Type A connection)

Processing & storage:
ARM Cortex-A7 processor at 900 MHz
512 MB RAM
An included 8GB micro SD card stores the OS and supplemental files such as synth modes, patterns, and presets.

Power:
External Power via USB-C Port
3x 'AA' batteries can be used as Internal battery power for portability. The battery holder can be found on the bottom face of the 201. Batteries not included.

Included items:
1x 201 Pocket Piano
1x External Power Supply with USB-A Port
1x Power Cable: USB-A to USB-C

Resources:
Manual (for additional troubleshooting and support, visit the forum)
More videos on YouTube
Critter & Guitari Forum
User Modes & Patterns on Patch Storage
Read more
 1 in stock $390.56
Click for better price!
or call +44 20 7424 1960
quote 972513
Critter & Guitari Rhythm Video Scope Oscilloscope Synthesiser (purple)
Cat: 879488 Rel: 30 Sep 22
 
The purple Rhythm Scope 'listens' for discrete sounds to sync new imagery to your beat.
Notes: If you ever wanted an audio-reactive video synthesizer, you have come to the right place!

There are three 'flavours' of video synth here: the classic Video Scope, the graphic Rhythm Scope, and the monochromatic Black & White Video Scope.

They operate the same way: connect an audio source such as a synth, electric guitar, groove box, vocals, etc., and instantly see your sound on a TV, projector, or capture device! The only difference is the style of visuals they create.

The Mode knob sets the visuals while the Gain knob fine tunes the incoming audio signal to suit the imagery.

Rectilinear graphics line up with incoming rhythms and arpeggios. For easy 'newness' the Random mode will choose a new visual pattern after a user-determined number of beats.

Design/Specs

Physical characteristics:
Size: 3.73 x 2.95 x 1.81" / 9.47 x 7.49 x 4.6 cm. Length includes jack. Height includes knobs.
Weight: 3.2oz / 90g

Input/output:
Composite Video Out - NTSC Format Only
1/4" Stereo Audio Input
2.1mm Centre-positive barrel connector for power input

Included items:
Power Supply:
Input: 100-240VAC @ 50/60Hz. Output: 9VDC, 1.3A, Center-positive polarity.

Rhythm scope:
Purple PLA enclosure
16 Modes - including one Random Mode
Read more
 2 in stock $157.65
Click for better price!
or call +44 20 7424 1960
quote 879488
Critter & Guitari TRS-MIDI Cable (26cm)
Cat: 792194 Rel: 24 May 21
 
TRS to DIN adapter
Notes: Male 3.5mm (1/8") TRS to Female 5-pin DIN adapter.

This adapter cable will connect the Organelle M's TRS-MIDI In or Out ports to another device with a 5-pin DIN MIDI port.

This adapter cable is TRS-MIDI Type A as set by the MIDI Manufacturers Association. Type A is the adopted standard of the MMA.

Overall length: 10.25" (~26cm)
Read more
 More than 10 in stock $6.85
Digitech Mosaic Polyphonic 12-String Effects Pedal (B-STOCK)
Cat: 1008910 Rel: 01 Jan 90
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The DigiTechr Mosaic Polyphonic 12-String effect pedal sets you upon the path of creating lush 12-string sounds with either 6-string electric or amplified acoustic guitars. Immediately identifiable 12-string tones are now yours with octave low strings and doubled high strings. Single notes and full chordal strums shine with polyphonic richness and celestial movement that will inspire you. The Mosaic's balanced low-end response with crisp octave shimmer produces a tone that's lush and articulate, just as with a 12-string guitar.

Tailor the Mosaic's sound with the independent Level and Tone controls. Level will control the 12-string effect intensity while Tone shapes the overall brightness of the effect. The Mosaic will give you a richer, more resonant and full tone than a standard six-string guitar. It is true bypass and uses a 9V DC power supply to easily integrate into your existing pedalboard.


General Specifications
SAMPLE RATE

44.1 kHz
FREQUENCY RESPONSE

20 Hz-11 kHz (Effect Enabled)
SIGNAL TO NOISE RATIO

> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD

0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
A/D/A CONVERSION

24-bit
INPUT

1/4" Unbalanced (Tip-Sleeve)
OUTPUT

1/4" Unbalanced (Tip-Sleeve)
CONTROLS

Level, Tone
TRUE BYPASS

Yes. True bypass circuitry preserves your tone when the pedal is not in use.
Dimensions
LENGTH

4.75" (120mm)
HEIGHT

1.75" (44mm)
WIDTH

2.875" (73mm)
WEIGHT

0.36 lb. (163g)
Read more
MRP:$146.33 SAVE 15%
 1 in stock $124.30
DivKid Mutes Performance Focused Multi-Channel Mute Module
DivKid Mutes Performance Focused Multi-Channel Mute Module (controller/expander/expression/multiple/quad/utility synth module)
Cat: 799084 Rel: 20 Nov 20
 
Controller/expander/expression/multiple/quad/utility synth module
Notes: Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing.

You also get a three position switch giving you: MOMENTARY signal pass through (it springs back to the centre when released); OFF (or muted) in the centre; and ON to the right. We've also added vactrols to the circuit giving the switching a pleasing decay for both audio and modulation as well a totally click free muting. This module can add mutes to anything, your mixer, module inputs or outputs, modulation signals, sequencers, gate sources and more.

Mutes was developed by Befaco on behalf of DivKid.

50 mA +12V
32 mm deep
O 4.29 (14 Votes) Average Rating
Read more
 1 in stock $114.75
Click for better price!
or call +44 20 7424 1960
quote 799084
Doepfer A-133-2 Dual Voltage Controlled VCA/Polarizer/Inverter/Ring Modulator Module (silver)
Doepfer A-133-2 Dual Voltage Controlled VCA/Polarizer/Inverter/Ring Modulator Module (silver) (attenuator/dual/stereo/polarizer/ring modulator/VCA synth module)
Cat: 765897 Rel: 28 Jul 20
 
VCA/polarizer/inverter/ring modulator module
Notes: A-133-2 is the slim version of the A-133 but has some additional features and improvements available compared to the A-133.

Module A-133-2 can be used for a lot of applications: as a simple VCA, or a voltage controlled polarizer/attuverter, or a voltage controlled inverter up to a DC coupled ring modulator. In principle the module contains two special voltage controlled amplifiers (VCAs) that allow both positive and negative amplification.

The overall amplification is definded by the sum of the voltage generated by the Man control, the external control voltage CV and the position of the CV control which works as an attenuator for the external control voltage. Without external CV the amplification is +1 when the Man control is fully CW. In the center position the amplification is zero and fully CCW it's -1 (i.e. the incoming signal is inverted). By means of the external control voltage CV the manually adjusted amplification can be modulated. CV can be both positive or negative (i.e. bipolar) to obtain positive or negative amplification values controlled by the external CV.

In addition the CV signal can be modulated via the modulation control input Mod by means of another control voltage. The Mod socket is normalled to +5V, i.e. a constant positive voltage is used as modulation CV provided that no plug is inserted into the Mod socket.

The current amplification is displayed by a dual color LED (note: it's not a signal display but indicates the amplification, probably yellow = positive amplification, red = negative amplification)
Application examples:
voltage controlled amplifier (VCA) with pure positive overall amplification (Man + CV)
voltage controlled inverter with pure negative overall amplification (Man + CV)
voltage controlled polarizer/attuverter overall amplification changing between positive and negative (Man + CV)
DC coupled ring modulator with offset feature, the "classical" ring modulator corresponds to Man=0 and symmetrical audio signals for In and CV
additional effects by means of the modulation feature of the CV signal (using the Mod input)
Read more
 1 in stock $100.00
Click for better price!
or call +44 20 7424 1960
quote 765897
Electro-Harmonix Pico Deep Freeze Digital Delay Effects Pedal (B-STOCK)
Cat: 1010687 Rel: 01 Jan 90
 
B-STOCK: Box damaged, product in perfect working order
Notes: ***B-STOCK: Box damaged, product in perfect working order***


Expanded Freeze in a lowball-sized package!

Meeting between the original Freeze and Superego pedals is the Pico Deep Freeze Sound Retainer. With the ability to freeze a moment in sound, the Deep Freeze can act as a sustain pedal for holding chords and notes as backing for your playing or as a platform to manipulate your tone into new sounds impossible with a normal guitar. In addition to the original Freeze's abilities, the Deep Freeze features layering, adjustable attack/decay speeds, glissando, dedicated volume controls, and 3 modes: Latch, Moment, and Auto, making it powerful pedal punching well above its weight.

The Deep Freeze allows for instant sound freezing in three modes of operation. Latch freezes sound each time the footswitch is pressed until the effect is bypassed, while Moment mode freezes sound only while the footswitch is held down. Auto mode captured sound automatically each time it senses signal above its threshold for virtually foot-free freezes. These three modes make it easy to operate the Deep Freeze in a way that fits any playing style.

Controls on the Deep Freeze let you further tailor the operation of the effect. Separate DRY and EFFECT volume controls let you blend signals from subtle backing to 100% effect experimentation. GLISS adjusts the morph time between freeze sounds creating otherworldly soundscapes. The SPEED/LAYER knob adjusts either the attack/decay time of the effect in Moment and Auto modes, or the amount of layering possible in Latch mode which makes playing impossible chords possible!

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023
Read more
MRP:$206.34 SAVE 23%
 1 in stock $159.15
Electrovision 3.5mm Stereo Jack Plug To 2 x 3.5mm Right Angled Mono Jack Plugs (1m)
Cat: 704972 Rel: 27 Sep 18
 
3.5mm stereo jack to 2 x 3.5mm right angled mono jacks
Notes: 3.5 mm Stereo jack plug to 2 x 3.5 mm right angled jack plugs. Loose, 1 m.
Read more
 6 in stock $1.58
Electrovision 3.5mm Stereo Jack Plug To 3.5mm Stereo Jack Plug (0.23m)
Cat: 704974 Rel: 01 Oct 18
 
Standard 3.5mm stereo jack to jack lead with screened cable
Notes: Stereo jack to jack lead, 0.23m length.
Read more
 7 in stock $0.53
Electrovision 3.5mm Stereo Jack Plug To 3.5mm Stereo Jack Plug Cable (1.2m, black)
Cat: 704976 Rel: 27 Sep 18
 
Male to male stereo 3.5mm mini-jack cable
Notes: Standard 3.5mm Stereo jack to jack lead with screened cable.
Read more
 More than 10 in stock $0.58
Electrovision 3.5mm Stereo Mini-Jack Plug To 3.5mm Stereo Mini-Jack Plug (5m)
Cat: 704977 Rel: 27 Sep 18
 
Male to male stereo 3.5mm mini-jack cable
Notes: Standard 3.5mm Stereo jack to jack lead with screened cable.
Read more
 3 in stock $1.58
Electrovision 5-Pin Din To 5-Pin Din MIDI Cable (white, 1.2m)
Cat: 450823 Rel: 22 Mar 12
 
Professional 5 pin din plug to 5 pin din plug MIDI lead with screened cable.
Notes: The white 1.2m heavy duty 4 core screened 5-pin MIDI plug to 5 pin MIDI plug is designed to use with most MIDI products such as keyboards, lighting controllers etc..
Read more
 7 in stock $1.58
Electrovision USB-C To USB-A Cable Version 3.1 Gen 2 (black, 0.3m)
Cat: 907300 Rel: 26 Oct 22
 
Connect USB C enabled devices such as smartphones, tablets, MacBooks, Chromebook Pixels, Galaxy Note 7 etc. with standard USB A enabled devices such as computers, car and wall chargers, external battery power banks etc.
Notes: Connect USB C enabled devices such as smartphones, tablets, MacBooks, Chromebook Pixels, Galaxy Note 7 etc. with standard USB A enabled devices such as computers, car and wall chargers, external battery power banks etc. Designed for charging and powering USB C enabled devices as well as transferring data from a portable hard drive and syncing data, photos and music from a smartphone. The reversible USB C connection means it will insert first time every time regardless of which side is up. Version 3.1 Gen 2 allows for data transfer speeds of up to 10 Gbps (classed as super speed). Moulded nickel-plated connectors, gold-plated contacts and black PVC jacket. Uses a 56K Ohm pull-up resistor for incredible safety and reliability.

Read more
 2 in stock $2.63
Erica Synths/Sonic Potions LXR Drum 7-Voice Percussion Synthesiser Module (B-STOCK)
Cat: 1010560 Rel: 01 Jan 90
 
B-STOCK: Box damaged, but product is in excellent condition and in perfect working order
Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Based on the excellent LXR-02 drum machine, the LXR Eurorack module is a percussion all-round, with six voices, trigger inputs and CV modulation, plus the ability to generate synth parts. Versatile.

Supplier's Notes:
LXR eurorack module is a compact and great-sounding percussion synthesizer based on the sound engine of the LXR-02 drum machine. While retaining the core interface of the LXR-02, this module adds the essential eurorack ingredient - assignable CV control over parameters and many more tweaks in the user interface for better integration in any eurorack system

Features

6 drum/percussion voices
7 trigger inputs with accents
5 assignable CV inputs
4 assignable outputs
3 voices can be used as basslines due to 1V/oct tuning
Over 30 adjustable parameters per voice
Insert FX section
Kit memory
SD card for Kit exchange and easy firmware updates
Kits compatible with the LXR-02

Dimensions
28 HP
35 mm deep

Current Draw
88 mA +12V
10 mA -12V
0 mA 5V
Read more
MRP:$472.68 SAVE 11%
 1 in stock $420.03
ESI Aktiv 10s Powered Studio Monitoring Subwoofer
Cat: 895990 Rel: 26 Jan 24
 
Powered studio monitoring subwoofer
Notes: Many monitoring setups contain a subwoofer as an essential ingredient. Although many studio monitors such as the aktiv 05, uniK 04 or uniK 05+ for example, provide sufficient bass frequency response for many applications, adding a aktiv 10s subwoofer will help you to provide a much better picture of the low frequencies in your mix. Whether you are producing classical 2.1 sound or 5.1 / 7.1 surround sound productions, aktiv 10s will easily and quickly become an important part of your monitoring setup. It's compact size with a stylish design, yet powerful output will easily convince you.

Features/specifications

10" bass reflex powered subwoofer
Amplifier power: 150W@100Hz, 4 Ohm, 0.1% THD
Subwoofer crossover frequency: 50Hz - 180Hz (adjustable)
Separate satellite output crossover frequency: @100Hz and flat (adjustable)
Phase control
Input level control
Power mode: standby and on
Inputs: balanced XLR, unbalanced 1/4" TRS
Outputs: balanced XLR
Input impedance: 20kOhm balanced, 10kOhm unbalanced
Foot switch input as mute control
Dimensions: 340mm(H) x 340mm(W) x 340mm(D)
Weight: 14 kg
Read more
 1 in stock $185.28
Click for better price!
or call +44 20 7424 1960
quote 895990
ESI M4U eX High Performance USB 3.0 MIDI Interface With Automatic I/O Detection
Cat: 895981 Rel: 26 Jan 24
 
High performance USB 3.0 MIDI with automatic I/O detection
Notes: M4U eX is a compact and yet extremely powerful USB 3.0 MIDI interface with 8 MIDI ports.

Each of the 8 ports can either be used as a MIDI input or as a MIDI output, replacing not only traditional MIDI interfaces like it's popular predecessor models with 4 inputs and 4 outputs, but providing also other possible configurations. For instance, you can use up to 8 outputs at a time or up to 8 inputs, or 6 outputs and 2 inputs - to name some examples. And the best feature? This is all handled automatically, simply based on your connection to other MIDI inputs or MIDI outputs and each automatic input / output configuration is displayed via colored LEDs on the front panel.

M4U eX is not only one of the worlds first USB 3.0 MIDI interfaces, it also includes a USB 3.0 hub with 3 connectors for other USB equipment like software dongles or USB keyboards and others. This can literally turn this device into the central hub for your MIDI and USB musical instrument devices. The class compliant device can be bus powered or if needed for other USB devices, be powered by the included DC power supply.

The Windows 7 / 8.1 / 10 / 11 and macOS compatible device provides not only perfect timing and the highest low latency performance of any MIDI interface in it's class on the market today, it can even be used fully standalone without a computer: different operation modes allow you to route input to output signals, merge MIDI signals or use M4U eX as a MIDI thru box. These modes can be selected with the push of a button when needed.

If the 8 ports are not enough, you can connect multiple units to the computer at one time - plus there is also the larger M8U eX available, with 16 ports.

Features/specifications

USB 3.0 MIDI interface
100% class compliant, works without the installation of a driver
USB bus powered
8 MIDI ports, 4 on the front and 4 on the back
Automatic input and output detection, each port works as a MIDI input or MIDI output
Standalone operation possible
Can be used as MIDI Thru box in standalone mode to send one MIDI signal to 7 outputs
Can be used as MIDI merger in standalone mode to merge 7 MIDI signals to a single output
3-port USB 3.0 hub with external 5V DC power supply to power USB devices (power supply included)
Multiple units can be used with one computer at a time
Downwards compatible to USB 2.0 with a USB 2.0 legacy mode
Optional ESI MIDI Port driver for multi device / multi client operation under Windows available
Dimensions roughly 17.5cm x 12.0cm x 4.5cm
Read more
 2 in stock $121.86
Click for better price!
or call +44 20 7424 1960
quote 895981
Flame uMCLK MIDI Clock Divider Module
Flame uMCLK MIDI Clock Divider Module (clock modulator/MIDI module)
Cat: 757290 Rel: 26 Feb 20
 
MIDI clock divider module - 5HP
Notes: The "uMCLK Divider" module can either work as a MIDI clock divider or as an analog clock divider. The divider outputs are assigned differently in both operating modes.

After receiving a MIDI start command, the module works as a MIDI clock divider. There are fixed dividers on 11 outputs. Via the divider output KEYS, triggers can be triggered and mixed via MIDI notes. The keyboard zone extends over three octaves. With the help of the LEARN key, the receive MIDI channel and the lowest note of this 3-octave range can be defined.

When stopped (i.e. after receiving a MIDI stop command or after switching on), the module works as an analog clock divider and divides the analog clock present at the CLOCK input. The 12 analog divider outputs can be reprogrammed via SYSEX. Ready-made SYSEX files are already available (e.g. for even / odd dividers, Fibonacci series, offbeats, etc.). The RESET input resets the analog counters or serves to deactivate the analog divider.

Connections:
- Ribbon cable adapter for Doepfer bus +/-12Volt
- Inputs: 2x Clock/Gate,Reset (0/+5..10V), 1/8th inch mono jacks
- 1x MIDI (TRS-B standard) 1/8th inch stereo jack Outputs: 1x MIDI (TRS-B standard) 1/8th inch stereo jack
- 14x Clock/Gate Divider, 1/8th inch mono jacks

Control elements:
- 1 push button with LED (LEARN key) 16 LED's
- Current consumption: max. +70..80mA / - 0 mA
- Size: Euro rack format 3U / 6HP 30x128,5x40 mm

Dimensions
5 HP
40 mm deep

Current Draw
80 mA +12V
Read more
 1 in stock $172.64
Click for better price!
or call +44 20 7424 1960
quote 757290
Intellijel Cascadia Bag
Intellijel Cascadia Bag (synthesiser bag)
Cat: 997146 Rel: 20 Feb 24
 
Bag designed to fit the Intellijel Cascadia
Notes: Holds everything you need

Very high-quality and durable padded gig bags for transporting your semi-modular synth cargo. Sized specifically for Cascadia.

The padded main compartment protects your case from bumps and scratches.
Zipped outer pocket for stuffing accessories and other gear.
The rear pocket closes with velcro at the top but unzips at the bottom to become a handle sheath so your case can sit on top of a rolling suitcase.
Super beefy strap connectors with clipped strap.
Lightweight with a single-handle design
Read more
 1 in stock $77.90
Click for better price!
or call +44 20 7424 1960
quote 997146
Intellijel Cascadia Dust Cover
Intellijel Cascadia Dust Cover (synthesiser dust cover)
Cat: 997148 Rel: 20 Feb 24
 
Dust cover designed to fit the Intellijel Cascadia
Notes: Polycarbonate Protection

Transparent polycarbonate lid for the Cascadia made by Decksaver. Keep your synth patched and dust-free:

Clearance to leave your Cascadia patched with a Lid attached.
Perfectly sized to fit with Cascadia in our Cascadia Gig Bag.
Lightweight and rigid.
Made by Decksaver UK with smokey polycarbonate.
Read more
 2 in stock $61.06
Click for better price!
or call +44 20 7424 1960
quote 997148
Knobula Kickain Kick Drum & Sidechain Module
Cat: 877364 Rel: 04 Jul 22
 
Kick drum & sidechain module - 12HP
Notes: A clever combo of kick drum synthesis, sidechain compression and digital reverb, Kickain allows you to generate rhythm tracks and work on your stereo mix simultaneously. Clever approach to mixdowns in Eurorack.

Supplier's Notes:
Introducing Kickain. The perfect pairing of a 909 inspired kick drum and side chain compressor. Designed to work in tandem as a single easy to control module, Kickain will revolutionise your side chain workflow, making it a breeze to tame the very heartbeat of your music, intelligently managing low frequency artefacts and removing any clashing frequencies or overlapping transients. The end result will leave you speechless, producing a cleaner, tighter mastering standard mix featuring the most powerful kick drum on the planet.

Spectral Compression

As well as the regular side chain effect of ducking the volume around the kick drum, Kickain also features two spectral compressor modes that intelligently eq the incoming mix to fit around the triggered drum sound, adjusting it continuously 1000s of times a second. The effect has to be heard to be believed, optimising the loudness of your kick without any intrusive 'pumping' on the overall mix. Tracks sound tighter and richer in the bottom end, whilst the kick is always punching through.

Tune to the Room

As with all Knobula products our focus is on performance, so we've given you the essential controls you need to design a kick that fits your tune, your room or your sound system without diving into menus or clicking encoders. The controls allow you to quickly create kicks for a whole host of genres and tempos as well as protect your ears and speakers. And if that's not enough there is a Send/Return option for further processing.

Reverb

Featuring 24bit stereo digital reverb, linked to the decay envelope, you can add subtle room effects or big 10 second bass drops at the twist of a single knob.

Dimensions:
12 HP
32 mm deep

Current Draw
80 mA +12V
80 mA -12V
0 mA 5V
Read more
MRP:$394.78 SAVE 15%
 1 in stock $334.76
Korg TM-70T Compact Tuner Metronome Combo (white)
Cat: 994383 Rel: 12 Mar 24
 
Compact tuner metronome combo
Notes: Compact Tuner-metronome combo

The Korg TM-70T is a compact tuner-metronome combo. Offers precise tuning, clear metronome sound, and a user-friendly display. Features a transpose function, long battery life, and is ideal for a range of instruments. Made in Japan for quality assurance.

The TM-70T combo metronome and tuner is the latest evolution in our TM series, expertly blending a tuner and metronome in one practical unit. Designed for the modern musician, it delivers a suite of features in a surprisingly compact design, ensuring you stay in tune and on beat, whatever your instrument.

The TM-70T is designed to be portable and user-friendly. It's small enough to fit in your pocket, yet features an improved display for easy visibility, making it an ideal companion for musicians of all levels.

Korg have fine-tuned the TM-70T for precision and clarity. The tuning is quicker and more accurate, essential for every performance, and the metronome sound is loud and clear, cutting through even in noisy environments.
Read more
 2 in stock $48.69
Click for better price!
or call +44 20 7424 1960
quote 994383
LOCI Flex Studio Equipment Stand
LOCI Flex Studio Equipment Stand (studio equipment stand)
Cat: 993263 Rel: 12 Feb 24
 
Stand designed to fit sound modules, groove boxes or keyboards
Notes: LOCI Flex is an organically styled 30 degree stand. It has an additional crossbar for supporting larger items and is perfect for studio and performance use.

Great for Desktop Modules and 25 key synths and Eurorack Modular setups.
Crossbar for extra width.
Assembled in seconds.
Super strong.
Precision laser cut from ethically sourced and renewable 6mm Oak veneer.
Beautifully detailed with laser etched logo.
Non-slip pads.
Packs flat to slide in your case or bag.

*** The Akai and Arturia units are not included, they are shown for demonstration purposes only.***
Read more
Tags: Stands
 1 in stock $59.99
Click for better price!
or call +44 20 7424 1960
quote 993263
Meris MercuryX Modular Reverb System Pedal
Cat: 975835 Rel: 06 Nov 23
 
Modular reverb system pedal
Notes: Meris describe the MercuryX as the most flexible studio reverb pedal ever made. A bold claim, but hear them out. Immense power with eight custom algorithms in a modular architecture. Full stereo with a wealth of programs from lush plates and twangy springs to experimental weirdness.

Supplier's Notes:
The Meris MercuryX takes the heart and soul of Mercury7 and expands it far beyond sci-fi into the highest quality and most flexible studio reverb ever created in a pedal format. Its modular reverb system format breaks the paradigm of pre-set reverb types and inspires new discoveries. MercuryX features the same easy to use UI as LVX, making it immediately intuitive to navigate.

All of Meris' passion for pro audio has made it into both the algorithms and hardware performance of this pedal. MercuryX combines 8 custom Meris reverb algorithms and incorporates those into a modular system architecture that first introduced with the award winning LVX pedal. It features discrete processing elements and control signal modifiers that can be connected as desired for infinite flexibility in crafting custom reverbs.

Here is a deep dive into the 8 different reverb structures in MercuryX. Each Reverb Structure has Gate controls that can be used to dial in a range of gated reverb effects including the classic percussive gate sound, reverse tail reverb sounds, and slow breathing textures.

Similar to the Dry Blend control of the Predelay, each Reverb Structure features a Predelay Blend control that allows you to put some or all of the predelay reflections in parallel with the reverb tank.

Ultraplate - Adapted from Mercury7, Ultraplate is an inspiring and lush plate with a fast build. Use the Ultraplate's flexible decay range to create a wide range of studio textures.

Cathedra - Adapted from Mercury7, Cathedra is a massive and ethereal algorithm with a slow build. Cathedra is perfect for scifi textures and recreating C-beams glittering in the dark near the Tannhauser gate.

Spring - A flexible algorithm that can be voiced to replicate both the amp based reverb sounds and the classic studio spring tanks featured on early recordings.

78 Room - A lively and direct sound. This algorithm is great for transforming static sounding virtual amps into the difficult to capture sound of a great amp live in the room with you. The Room algorithm features a unique infinite mode (Maxed out Decay controls) that interacts with the Tank Mod to provide deep chorused and flanged reflections.

78 Plate - Fast and dense, the 78 Plate algorithm is a good match for beefing up percussion and vocals.

78 Hall - A large hall with a medium build up of reflections. Great for building up ambient walls of sound. The Hall algorithm's extended reflections are a great base for sculpting with the Bass/Mids/Cross controls. Deep rumbling bass caverns and ethereal upper mid emphasized halos of sound are easy to create. Explore the additional sparse mode for the Hall when Diffusion is set Low.

Prism - The Prism Strucure is an dual tank that allows you to build your own geometric rooms by specificying the size and distance and reflectivity. Prism features a highly configurable modulation section which allows different modulation phases per side to further increase the stereo image.

Gravity - The Gravity Structure works by accelerating indivual windows of your signal and stretching them across the horizon.
Read more
 3 in stock $625.32
Molten Modular Motion MTR CV & Audio Utility/Real Time Visualiser Module
Molten Modular Motion MTR CV & Audio Utility/Real Time Visualiser Module (mixer/attenuator/polarizer/utility synth module)
Cat: 907132 Rel: 18 Nov 22
 
Motion MTR allows you to mix, attenuate and invert signals while having clear visual feedback of their levels.
Notes: Motion MTR allow you to mix, attenuate and invert signals while having clear visual feedback of their levels.

Each channel can function as:

Audio level control with VU meter
CV attenuator with voltage meter
CV inverter with voltage meter
Each input is normalled to 10v, so you can
use each of them to generate fixed voltages.
Also, the outputs of channels 1 and 2 are summed into Out 3 to be used as a mixer.
Patch it wildly to make it work as an attenuverter with offset, as a mixer, a VU meter or a combination of them all!
This module is our first collaboration with Robin Vincent from Molten modular.

Specs

Current Draw: +12v: 110 mA -12v: 43 mA
Width: 6HP
Depth: 30mm including power connector
Aluminium, heat-treated front panel.
Designed and assembled in Barcelona.
Idea by Robin Vincent
Read more
MRP:$135.80 SAVE 15%
 1 in stock $115.79
Moog Theremini Theremin Gig Bag
Cat: 558506 Rel: 28 Jan 15
 
Padded carry bag for the Moog Theremini
Notes: A padded carrying case for the Theremini and Etherwave Theremins. Perfect for the thereminist on-the-go. Black nylon packcloth with 3/4" foam padding, removable padded shoulder strap, internal pouch for antennas, and external pouch for power supply unit.

Key Features

Nylon Construction
Pouches for Antennas & Power Supply
3/4" Foam Padding
Removable Shoulder Strap
Read more
 1 in stock $53.69
Click for better price!
or call +44 20 7424 1960
quote 558506
Morphor Envelope - Dual ADSR Analogue 2-Channel Envelope Generator Module
Cat: 1000411 Rel: 19 Feb 24
 
Analogue 2-channel envelope generator module - 6HP
Notes: The Morphor Envelope - Dual ADSR is a slim (6 HP) dual envelope generator. Each channel features standard ADSR (Attack, Decay, Sustain, Release) analogue circuitry, providing the classic, rich envelope shaping tools essential for any modular enthusiast. It features separate control knobs for the attack, decay, sustain and release parameters, two independent channels for versatile envelope shaping and each channel comes equipped with gate, re-trigger, output, and an inverted output.

On the back of the module you can find tiny switches for each channel to change the overall length of the complete envelope:
Short: 5 ms - 30 s
Med: 25 ms - 60 s
Long: 60 ms - 200 s (=3.3 min)

Features

100% analogue
Dual channel
Attack length control
Decay length control
Sustain level control
Release length control
Inverted output
Re-trigger

Specifications

Panel width: 6 HP
Panel height: 3 U
Module depth: 40 mm
Current draw: 12 V : 32 mA | -12 V : 32 mA | +5 V : 0 mA
Dimensions: 128.5 x 30.3 x 40 mm
Weight: 111 g
Power Socket : 16-pin
Read more
 2 in stock $114.75
Click for better price!
or call +44 20 7424 1960
quote 1000411
Neo d+ TRS Class B 1/4" TRS To 1/4" TRS Audio Cables (pair, 2.0m)
Cat: 509714 Rel: 20 Nov 13
 
Pair of TRS to TRS audio cables, 2.0m
Notes: Multi-purpose high quality TRS to TRS audio cables from Neo by Oyaide.
Read more
 1 in stock $29.22
Neo d+ TS Class B 1/4" TS To 1/4" TS Audio Interconnect Cables (pair, 2.0m)
Cat: 477127 Rel: 04 Jan 13
 
Pair of 1/4" TS to 1/4" TS audio cables, 2.0m
Notes: Used by artist's such as Dubfire, Richie Hawtin and Carl Craig the d+ RCA series is specialized for DJs and designed according to feedbacks of DJs, Artists, and Clubs. By connecting between a DJ mixer and some DJ equipments such as CDJ, Traktor and Serato, you can get a huge advantage about the sound quality.

About the product planning for the d+ RCA series, Neo contemplated the best combination of important materials and factors such as its structure, conductor, insulator, shielding, outer sheath, and contact of plug.As a matter of course, for not only a data compressed file but also WAV, AIFF, and CD, it contributes to dissolve the stiffness and shallowness of digital sounds. In addition, its hi-definition playback property helps for making a good quality file recording for vinyl sound capturing.
Read more
MRP:$29.48 SAVE 19%
 1 in stock $23.86
QTX Adjustable Studio Monitor Floor Stand (single)
Cat: 950532 Rel: 17 Jul 23
 
Adjustable monitor floor stand.
Notes: Adjustable Studio Monitor Floor Stand

The adjustable monitor floor stand by QTX is perfectly designed for studio and home use, providing a sturdy platform for your speakers. Adjust the height of the stand using the hand fastener and safety pin to one of the 5 height positions, up to 540mm high. Foam surface pads are provided to minimize unwanted vibrations and ensure your monitor stays firmly in place. This stand is recommended for use with small and midfield studio monitors. Maximum weight capacity.

Plate dimensions: 240 x 230mm
Base: dimensions: 250 x 225mm
Height: 300mm (minimum)
Height adjustments: 340mm, 390mm, 440mm, 490mm, 540mm
Max. weight load: 15kg
Weight: 2.53kg

In the box

The box for this item contains:
1pcs adjustable studio monitor floor stand
Read more
MRP:$31.58 SAVE 18%
 2 in stock $25.80
Rode Wireless GO II Charge Case (B-STOCK)
Rode Wireless GO II Charge Case (B-STOCK) (micrphone system charge case)
Cat: 1009612 Rel: 01 Jan 90
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The Charge Case is a handy charging case for the Wireless GO II. It accommodates both transmitters and the receiver and features an integrated battery that facilitates three full recharges for up to 30 hours of continuous use. With a rugged enclosure and zip system, it is also perfect for protecting the Wireless GO II when in transit or storage.
Read more
MRP:$73.69 SAVE 10%
 1 in stock $66.16
150/64(ページ1/2)の商品
1  2  »
Cart subtotal: