Secure shopping Secure shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

Secure shopping Secure shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
133/33(ページ1/1)の商品
ART AV Direct Audio Video Interface Direct Box
 カートに入れる
 1 in stock $53.08
Cat: 457944 Rel: 04 Jun 12
 
Audio interface with transformer isolated XLR microphone level output
Notes: The AV Direct is the ideal input solution for any application where stereo iPods, laptop computers, consumer DVD players, consumer Hi-Fi equipment or video machines have to be connected to a single XLR microphone level input. Unlike standard gender bender cables or DI boxes, the AV Direct can accept virtually any input connection and output level (including amplified speaker outputs) and offers remote level control, ideal for setting the volume of your component at the source, rather than in and AV room, audio closet or installation rack.

The AV Direct has stereo RCA, 1/8" and 1/4" TRS line level inputs, as well as a 1/4" and bare wire pressure clip speaker level inputs. A switchable 4.8 kHz high cut filter, ground lift and variable level control allow the AV Direct to effectively filter out any extraneous unwanted noise while offering variable volume control at source. The speaker level inputs are heavily padded and transformer isolated from the XLR output, allowing amplified speaker level (up to 100W @ 8 Ohms) to be tapped off, and sent to a microphone level input. A 20Hz to 20 kHz frequency response ensures the AV Direct will function seamlessly with any high quality audio source.
Read more
ART Clean Box II Ground Loop Isolator
 カートに入れる
 2 in stock $48.98
ART Clean Box II Ground Loop Isolator (ground loop eliminator)
Cat: 250550 Rel: 25 Dec 06
 
Removes electrical hum from audio equipment
Notes: ARTcessories are taking the audio world by storm and quickly becoming a popular brand with musicians, DJs and studio engineers everywhere around the world. You will discover a robust line of useful tools which include a complete range of direct boxes, headphone amps, small mixers, mic cable combiner/splitters and much more. ARTcessories are designed to deliver affordable solutions for a multitude of audio needs for any size project.

Hum in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called 'ground loops'. The safest way to eliminate unwanted noise is with the CleanBOX II.

Some examples of Ground Loops:

The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer's ground, then into a mixer's power ground.
The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit.
The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second guitar amp's power ground.

The CleanBOX II easily removes ground loops without any signal degradation.
Read more
ART DADB Dual Active Direct Box
 カートに入れる
 1 in stock $68.11
Cat: 515511 Rel: 16 Dec 13
 
Dual channel active DI box
Notes: The ART dADB dual active direct box acts as two independent, high quality active interfaces for connecting instrument, line, or speaker level signals to balanced inputs. The high impedance ¼-inch inputs are buffered and converted by extremely low noise active electronics to deliver isolated, balanced, low impedance outputs.

The dADB delivers an extremely flat and wide frequency response even at high input levels, making it a virtually acoustically transparent DI solution.

Input attenuation on each channel allows for a wide range of source signal levels. Independent parallel thru jacks allow for tapping the signal chains. A Ground Lift on each channel allows for totally separate the input and output signal grounds to isolate two systems when required, thus reducing hum and ground-loop noise.

Switchable low pass Bessel filters eliminate high frequency interference. Operating outside of the audio range these complex and effective filter circuits are primarily intended to eliminate radio frequency interference before it gets into the main system. They also effectively reduce digital computer noise making the dADB the ideal DI solution for laptops, computer workstations and peripherals when used in stereo PA applications.

The dADB's active circuitry is powered by phantom power or by an internal 9V battery when external power is not available. Low current draw (less than 7.5 mA) should provide more than 100 hours of operation with a new battery (alkaline recommended).

The compact black all steel case and active design ensure unmatched long-term reliability in Live Sound, Permanent/Fixed Install, D.J., or virtually any PA application.
Read more
ART DJ Pre II Phono Preamplifier
 カートに入れる
 3 in stock $57.87
ART DJ Pre II Phono Preamplifier (phono preamplifier)
Cat: 343707 Rel: 16 Feb 09
 
Interface between turntable and audio recording/playback system, analog input capacitance can be switched between 100pF and 200pF
Notes: The DJ PRE II acts as an interface between your turntable and your audio recording/playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card. Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.
Read more
ART DTI Dual Transformer & Ground Loop Isolator
 カートに入れる
 2 in stock $51.92
Cat: 450022 Rel: 19 Mar 12
 
Passive audio interface
Notes: The DTI (Dual Transformer/Isolater) is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100k Ohms.

What further sets the DTI apart from other lesser isolation boxes is its connection versatility, with XLR, 1/4" phone, and RCA type phono connections on all inputs and outputs. This allows it to easily fit into virtually any audio system and be the clean patch point between all types of systems.

Whether you need an interface between a computer based audio workstation and your monitor system, isolation on long cable runs in a fixed installation, isolation of a signal source from your recording equipment, or in many cases, just a safer connection between two audio systems, the DTI can accommodate.

The compact black anodized all aluminum case and it's passive design allow the DTI to provide years of trouble free service in Live Sound, Permanent/Fixed Install, DJ, and virtually any PA application. Its full feature set, rugged construction, and high-end specifications make the DTI the obvious choice.
Read more
ART Dual RDB Interface DI Box
 カートに入れる
 1 in stock $73.15
ART Dual RDB Interface DI Box (audio/MIDI interface)
Cat: 450016 Rel: 23 Apr 12
 
Dual re-amping direct box
Notes: The Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be connected to XLR microphone or 1/4" instrument level inputs.

The unit has 2 x high quality isolation transformers that prevent ground loops when connecting various systems together.

The Dual RDB accepts 1/4" TRS and XLR line level inputs and outputs mic or instrument levels. The Dual RDB's variable level controls allow volume control to be set at the source rather than in the studio, AV room, audio closet or installation rack. A 20Hz to 20 kHz frequency response ensures the Dual RDB will function transparently with any high quality audio source.

Read more
ART Dual X Direct Dual Professional Active Direct DI Box
 カートに入れる
 1 in stock $52.55
Cat: 450026 Rel: 19 Mar 12
 
Dual channel active direct box, comes with super quality battery
Notes: The DUALXDirect provides 2 x independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR inputs (provided via combo jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input attenuator switches allow for a wide range of signal levels and the input Thru jacks allow for tapping off of your signal chain. The ground lift switches let you totally separate the input and output signal grounds, when appropriate, to isolate 2 systems, thereby reducing hum and ground-loop noise.

The DUALXDirect's active circuitry is powered by phantom voltage from the output connections or by an internal 9V battery, when external power is not available. When powered by a battery, it draws less than 7.5 mA which should provide more than 100 hours of operation with a new battery (alkaline recommended). If phantom power is available, then the DUALXDirect will automatically draw its power from the external source. The power on/off switch lights more dimly when the unit is running off of the battery, lights more brightly when it is running off of phantom power, and is off when the unit is inactive.

The compact black-anodized all aluminum case and it's active design allow the DUALXDirect to provide years of trouble free service in live sound, permanent/fixed install, DJ, and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DUALXDirect the obvious choice.

The Art ARTcessories DUALXDirect features

Fully active design
Phantom voltage or 9V battery powered
Converts high-impedance balanced / unbalanced inputs into 600 Ohm balanced outputs
Switchable input attenuation (0, -30 dB)
Switchable ground lift
1/4" TRS / XLR combo connector inputs
XLR connectors for balanced outputs
Rugged extruded aluminum case
Frequency Response: 10 Hz - 100 kHz, i 0.5 dB @ +0 dBu
THD: <.05% (typical)
Dynamic Range: >100 dB (typical)
Channel Separation: > 80 dB (typical)
Maximum Input Level: +4, +34 dBu
Maximum Output Level: +6 dBu (battery powered), +14 dBu (phantom powered)
Input Connections: 1/4" TRS XLR female balanced / unbalanced (2), 470k Ohm
Thru Connections: 1/4" TRS (2)
Output Connections: XLR male balanced (2), <600 Ohm
Input Attenuation: Switchable, (0, -30 dB)
Power Requirements: 9V @ 7.5 mA (battery, alkaline recommended), 18 - 48V DC @ 6.4 mA (phantom power per channel)
Dimensions (DWH mm): 99 x 117 x 47
Weight: 0.38kg
Read more
ART Head Amp 4 Pro Headphone Amplifier
 カートに入れる
 1 in stock $118.07
Cat: 521194 Rel: 04 Aug 14
 
5 channel headphone amplifier with talkback functionality
Notes: The ART HeadAmp4Pro could be the most fully featured ultra compact headphone amplifier in its price point on the market today.

Packing as many features as possible into the small format chassis, the HeadAmp4Pro has five stereo headphone outs, each with their own volume control. A separate footswitchable XLR input (with phantom power) allows instant talkback to any one, or all of the connected headphones. Input matrix allows the listener to audition any or all auxiliary inputs for maximum versatility.

Although designed for home and project studio, the HeadAmp4Pro may easily be the ideal solution for teaching stations and conferencing communication networks.
Read more
ART Head Amp 6 Channel Rackmount Headphone Amplifier
 カートに入れる
 1 in stock $161.26
Cat: 515507 Rel: 23 Dec 13
 
Rackmount headphone amplifier
Notes: The HeadAmp6 is a fully featured six channel stereo headphone amplifier that includes six auxiliary inputs to allow separate "more-me" mixes on each headphone channel.

Each output channel has a dual function Balance Control which will pan between Left & Right input of the main signal bus, or vary the mix between the main stereo signal bus and the auxiliary input for that respective channel.

Each output channel includes one front and two rear panel stereo 1/4" TRS head-phone jacks for ease of installation and quick patching capability. Mono, Mute L, and Mute R select buttons and on each channel select between four operating modes; 1) Stereo, 2) Mono Left, 3) Mono Right, 4) Mono Both (Left & Right) for versatile monitoring solutions. Independent output level controls on each channel personalize monitoring levels.

Input options include XLR and 1/4" TRS balanced inputs with matching "Thru" jacks for bridging multiple units. An additional front panel stereo 1/4" TRS Direct In jack for quick patch override of the rear panel inputs is included for quick insertion of any stereo source. Master Volume control sets the main signal bus level. Eight-segment precision LED level metering on the main bus and four-segment indicators on each output channel provide visual feedback of the signal level at all key points.
Read more
ART MConnect USB To Audio & MIDI Interface
 カートに入れる
 1 in stock $35.39
Cat: 450012 Rel: 19 Mar 12
 
USB MIDI cable connects any MIDI device, including musical instruments, controllers and sound modules, to USB port
Notes: The ART MConnect USB MIDI Cable provides an easy way to directly connect any MIDI device, including musical instruments, controllers and sound modules, to your computer's USB port for convenient use with audio workstation software for music production, recording or sequencing without any extra equipment. The MConnect supports up to sixteen channels in and out. Indicators simplify troubleshooting incoming and outgoing MIDI data. No special drivers are required, just plug and play with your Windows PC or Mac.

Simply plug the MIDI input or output connector (whichever is appropriate) into your device and the USB connector into your computer. That's all there is to it. The first time you connect your MConnect to your computer, all the necessary drivers will be automatically installed and the cable will then be ready to use. The MConnect may be used with any software that supports USB MIDI devices.

Read more
ART MyMonitor Personal Headphone Monitor Mixer
 カートに入れる
 1 in stock $70.79
Cat: 457999 Rel: 04 Jun 12
 
Miniature headphone mixer
Notes: A performer needs to hear him/herself through headphones exclusively or mixed with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the mic signal, however, should be going to the main mixer.

Connect the MyMONITOR between the mic and line source, and the mixer. The mic and line monitor levels can then be adjusted for mix and volume through the headphones. Only the mic signal will go to the board. And since the MyMONITOR can be AC or battery powered, the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or condenser mics can be used since phantom power would come through the mic thru jack from the mixer or other source.
Read more
ART P16 XLR Balanced Rackmount Patch Bay
 カートに入れる
 1 in stock $101.90
Cat: 478271 Rel: 14 Jan 13
 
16 channel XLR balanced patch bay
Notes: The ART P16 XLR Balanced Patch Bay. Ideal for any live PA rack, studio rack or fixed installation where easy access to XLR inputs are required, the P16 brings all rear-mounted XLR inputs from various devices to one, convenient single space rackmountable location. The P16 saves wear and tear on the connectors of expensive audio equipment by bringing all commonly used connections to the external patch bay.

All-steel chassis, black anodized finish and secure, high-quality XLR connections front and back with internal connections made via PCB wiring ensure long term reliability from the passive ART P-16 balanced XLR rackmount patch bay.


Read more
ART PB 4x4 Power Distribution System
 カートに入れる
 1 in stock $62.76
Cat: 472388 Rel: 12 Nov 12
 
Power distribution system
Notes: The PB 4x4 features ART's 4x4 distribution on the back of the unit, 4 of the 8 rear outputs are 1.25" apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have 8 total power outlets to choose from.

Built into the PB 4x4 is a Surge and Spike Protection System, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering.

The PB 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The unit has a total power capacity of 1800W, and has a front-mounted, 15 AMP circuit breaker.

The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19" equipment racks. Applications for the PB 4x4 include live sound systems/PA, permanent or fixed installations, church, club and practice PA systems, DJ sound systems, home and project recording systems, and monitor systems.

The PB 4x4 features a one-year warranty.
Read more
ART Phantom II Pro Dual Channel Phantom Power Supply
 カートに入れる
 1 in stock $62.76
Cat: 458003 Rel: 04 Jun 12
 
2-channel 48V phantom power supply
Notes: The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or 2 condenser microphones in a rugged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing battery life. The Phantom II Pro installs inline between your microphone and a balanced line input on your gear. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used.

The Phantom II Pro is an invaluable tool in application areas including (but not limited to): home or professional recording studios, live sound, PA, permanent installs, DJ, AV, podcasting and broadcasting. Use it with mixers, audio processors, digital audio workstations or anywhere you need phantom power for your mics.
Read more
ART PowerMix III Stereo Mixer
 カートに入れる
 1 in stock $105.12
Cat: 458005 Rel: 04 Jun 12
 
3 channel personal mixer
Notes: How do you connect a CD player, a synthesizer and the line output from a bass amp to a tape deck? Use a simple stereo mixer. The PowerMIX III can accept either mono or stereo signals and mixes them down to stereo or identical L/R mono signals.

Additionally, the PowerMIX III provides a headphone output with its own level control.

Usage:

1. Plug the AC adapter into the 12V DC input on the PowerMIX III and plug the other end into a 120V AC wall socket.

2. Plug your stereo signal sources into the separate L/R Inputs on channels 1 to 3. Mono sources can be plugged into the Left Input on any channel. It is not recommended that you connect 2 mono sources to any one channel.

The specifications:

Maximum gain: +27 dB
Input impedance: 10k Ohms
Maximum input level: +30 dB
Maximum output level: +13 dB
Output Impedance: 100 Ohms
Total harmonic distortion: > 0.005%
Adapter: included
Power: 12V DC
Dimensions: 143mm x 92mm x 45mm
Weight: 590g.
Read more
ART Pro MPA II Rackmount Mic Preamp
 カートに入れる
 1 in stock $354.01
Cat: 459300 Rel: 25 Jun 12
 
2 channel microphone preamplifier with selectable phantom power
Notes: The ART Pro MPA II is an affordable high performance microphone preamp.

The ART Pro MPA II can be configured for dual mono or stereo operation with selectable mid/side mic support, summing the adjacent channel, to decode left/right signals.

Each microphone input circuit, with selectable 48V phantom power, features variable input impedance which can radically vary the overall performance of any high quality dynamic or ribbon microphone.

The Pro MPA II can operate at either a low or high plate voltage on the 2 integrated hand-selected 12AX7 tubes for wider variation of preamp tone and performance. Large back-lit analog VU output meters display output levels while multi-colored LED arrays show tube gain.

Housed in a standard 2U space rack mountable steel chassis, with CNC routed black anodized aluminium face panel, the Pro MPA II is designed to deliver years of reliable operation in the studio, production facility, or on the road for live sound reinforcement.
Read more
ART Pro VLA II Valve Compressor & Amplifier
 カートに入れる
 2 in stock $449.48
Cat: 455712 Rel: 14 May 12
 
2 x channel Vactrol-based compressor/leveling amplifier
Notes: The Pro VLA II is a tube driven Vactrol-based compressor/leveling amplifier designed to excel in any professional audio environment. Superior performance and an incredible tone makes the Pro VLA II and indispensable tool for tracking, mixing, mastering, dynamic control of live sound sources or for use in broadcast audio.

Capable of delivering a far more musical natural sounding and sonically transparent compression than competitive units in its class, the Pro VLA II uses an Opto-electronic circuit rather than the more typical design VCA driven level detection circuit. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II the ideal dynamic control device for critical audio applications.

Exceptional signal integrity with extremely low noise and low distortion is achieved in the Pro VLA II by utilizing a transformerless design throughout.

Unlike typical compression units that use Voltage Controlled Amplifiers (VCA's) to handle level detection, the Pro VLA II's Opto-electronic design allows a far more transparent and musical sounding compression without sounding aggressive or un-natural. This Vactrol based optical electronic circuitry is the basic component of the classic highly sought after compressors of past.

The Vactrol design allows the Pro VLA II to react to audio signal in much the same way the eye naturally adjusts to fluctuations in light levels, smoothly, quietly and almost imperceptibly.

The Pro VLA II is a soft knee leveling amplifier by design. Although capable of providing dramatic compression effects, the Pro VLA II was designed to excel in any application where transparent, expressively musical dynamics control is desired.

Large highly visible backlit analog VU meters accurately display input and output levels while extremely fast 10-segment LED's display gain reduction. For added functionality, the LED's display either average level for mastering & mixing applications or peak hold for monitoring individual sources when tracking audio.

XLR and 1/4" TRS balanced inputs and outputs are provided to ensure the Pro VLA II can connect with any audio source or hardware. A +4 dBu/-10 dBu mode switch optimizes the Pro VLA II I/O for either consumer or professional equipment.
Read more
ART ProMix 3 Channel Mic Mono Mixer
 カートに入れる
 1 in stock $112.64
ART ProMix 3 Channel Mic Mono Mixer (microphone mono mixer)
Cat: 458012 Rel: 04 Jun 12
 
3 channel microphone mono mixer, mains or battery powered
Notes: You need to add 3 mics to a mixer, which only has one available channel. Just insert a ProMIX between the mics and the mixer. Each mic channel on the ProMIX has both phantom power and low frequency cut selectable via DIP switches plus a level control. The balanced XLR line output can be connected to a mic input on the mixer and headphones or a powered monitor can be connected to the phone/aux output.

And if AC power is not available, the ProMIX runs on batteries as well.
Read more
ART SCL2 Dual Stereo Rackmount Compressor Limiter Expander Gate Unit
 カートに入れる
 1 in stock $164.96
Cat: 542511 Rel: 04 Aug 14
 
Dual / Stereo Compressor / Limiter Expander / Gate unit, rackmountable
Notes: The SC2 is a highly sophisticated and flexible dynamics processor designed for easy operation and great tone. The unit can be adjusted to provide anything from smooth subtle compression to hard limiting. Noise reduction is provided by a fast solid gate or a subtle expander.

The Attack and Release functions allow the user to set the general operating range and then automatically adapt to the audio being processed. A full auto mode is also available. The ultra-precise LED meters while two LED meters clearly display the gain reduction for each channel.
Read more
ART SDA1 Studio Digital Amplifier
 カートに入れる
 1 in stock $336.26
Cat: 588631 Rel: 28 Sep 15
 
Studio digital audio amplifier with extremely low noise and distortion design - all steel and aluminium chassis construction
Notes: Studio Digital Amplifier

The extremely efficient Class-D topography used in the ART SDA1 Studio Digital Amplifier delivers 200 watts per channel (at 4 ohms) in a compact, single rack space chassis. Taking advantage of the full potential of digital amplifier design, the SDA1 doesn't require noisy, dust collecting cooling fans in operation, making it the ideal solution for studio control rooms and installations.

The flat 20Hz to 20kHz frequency response makes the SDA1 the perfect choice for critical listening in studio environments. Balanced inputs and versatile multi-way binding post outputs ensure quick connectivity to any source and speaker combinations, including 70v commercial installation systems.

A solid steel and aluminum chassis design ensures maximum reliability. Recessed 'pop-up' detented attenuator knobs deter uninvited users adjusting volume settings in install applications.
Read more
ART SLA1 100W Studio Linear Rackmount Amplifier
 カートに入れる
 1 in stock $341.69
Cat: 516421 Rel: 23 Dec 13
 
100 watt power amplifier with 10Hz to 40KHz frequency response
Notes: The SLA-1 Studio Linear Amplifier is a robust yet compact power amplifier designed for studio or even select live applications. It has been designed and engineered to provide clean, quiet power and excellent sound with ultra-low noise and distortion.

Rated at 100 watts rms/channel @ 8 ohms (130 watts rms/channel @ 4ohms), with a frequency response from 10 Hz to 40 kHz the SLA-1 is perfect for professional, project and home studios. Capable of delivering 260 Watts when bridged mono into an 8 ohm load, the SLA-1 can easily move out of the studio and into any live rig or installation as an ideal monitor amplifier or zone amp solution.

The SLA-1 has been designed to deliver in the most demanding audio applications. Housed in an aluminum and steel single space 19-inch rackmount chassis, the SLA-1 uses a proven toroidal transformer design for unmatched long-term reliability.

The SLA-1 features SmartFan, an advanced, thermal dependent fan assisted convection cooled system. The SmartFan system is dependent upon the internal ambient temperature of the unit, and runs at high or low levels depending on the amplifier's cooling needs.

XLR and 1/4-inch TRS balanced inputs as well as multi-way output binding posts are ensure the SLA-1 can be quickly and easily tied in to any system without modification. A simple to install tamper proof cover is included.
Read more
ART SP 4x4 Rackmount Metered Power Distribution System
 カートに入れる
 1 in stock $125.51
Cat: 515506 Rel: 16 Dec 13
 
Rackmount metered power distribution system
Notes: The SP 4x4 features a backlit linear meter to monitor input voltage, which gives the user a familiar analog style readout when monitoring voltage from a power source.

The SP 4x4 also features ART's "4x4" distribution on the back of the unit - four of the eight rear outputs are 1.25" apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power outlets to choose from. Built into the SP 4x4 is a surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes.

The unit also has RFI and EMI filtering, a 15 amp breaker, and a total power capacity of 1800 watts. The SP 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front mounted circuit breaker reset switch. The rugged, all steel chassis occupies 1U rack spaces and is intended for installation into standard 19" equipment racks.

Applications for the SP 4x4 include Live Sound Systems/PA, Permanent or Fixed Installations, Church, Club and Practice PA Systems, DJ Sound Systems, Home and Project Recording Systems, and Monitor Systems.
Read more
ART SplitCom Pro Mic Splitter/Combiner
 カートに入れる
 1 in stock $40.75
ART SplitCom Pro Mic Splitter/Combiner (microphone splitter/combiner)
Cat: 458020 Rel: 04 Jun 12
 
Microphone controller
Notes: Use the SPLITComPro to split or combine balanced low impedance microphone signals.

As a splitter: the SPLITComPro provides one direct-coupled output and one isolated output from a single microphone. Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The main mic output passes phantom power from the main mixer to the amin mic input for use with condenser microphones. The Phantom power is blocked from passing to the isolated mic output.

Aa a combiner: The SPLITComPro provides one output from 2 microphone inputs. The phase switch can be used to invert the relative phase of the isolated mic input. Applications include dual micing of percussion instruments, choirs, and instrument amplifiers. The Phantom power passes through each output to their respective input, (main to main, isolated to isolated), however the phantom power is blocked from passing between the main and isolated signal paths. Only the audio passes between the main and isolated signal paths (it is present on all inputs and outputs).
Read more
ART SplitMix 4 Cable Splitter
 カートに入れる
 2 in stock $53.08
Cat: 458025 Rel: 04 Jun 12
 
4-channel passive stereo/mono hybrid splitter/mixer
Notes: The SPLITMix4 is a fully passive hybrid mixer that offers a wide variety of configurations. Mix 4 stereo input channels down to 1 stereo output, split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide range of applications. You can even configure the SPLITMix4 as 4 stereo input channels thru 4 independent level attenuators to 4 stereo output channels.

Independent stereo level controls are provided on each channel. All 1/4" connections are stereo TRS (Tip, Ring, Sleeve) and all channel connections have intelligent switching to allow for a wide variety of configurations. Plugging into a mix input channel removes it from the splitter bus, and plugging into a splitter output channel removes it from the mix bus. Stereo or mono operation is determined by the type of 1/4" plug and cabling that you use.

The fully passive design of the SPLITMix4 has no active circuitry to add noise or distortion, and virtually any signal level can be handled. The Level attenuators cover a wide range and offer over 90 dB of attenuation and channel isolation. The SPLITMix4 is designed primarily as a line level device with medium input and output impedances.
Read more
ART TPatch Eight Point Balanced Patch Bay
 カートに入れる
 1 in stock $40.21
Cat: 458032 Rel: 04 Jun 12
 
8-point balanced patchbay
Notes: The ARTcessories TPatch is a compact 8-point balanced patchbay that organises your cables into a convenient central location on your studio desktop. Designed for maximum flexibility, the TPatch has 1/4" TRS phone connectors user selectable normal and half-normal modes.

The compact black-anodized all aluminum case and it's passive design allow the TPatch to provide years of trouble free service.

The specifications:

Connectors: 1/4" TRS balanced phone jacks
CMRR: > -90 dB (typical)
Isolation: > -80 dB (typical)
Dimensions (mm): 47 H x 117 W x 99 D
Weight: 0.38kg

Connectors: 1/4" TRS balanced phone jacks
CMRR: > -90 dB (typical)
Isolation: > -80 dB (typical)
Dimensions: 47mm x 117mm x 99mm
Weight: 0.38kg.
Read more
ART Tube MP Mic Preamp
 カートに入れる
 1 in stock $93.87
ART Tube MP Mic Preamp (microphone preamp)
Cat: 450296 Rel: 19 Mar 12
 
Professional Tube microphone preamplifier
Notes: The ART Tube MP Original Microphone Preamp is the world's most popular external tube microphone preamp. Whether you are working with a digital computer or analog recording system, the Tube MP's TEC award nominated design will allow you to obtain professional recording studio results. The hybrid design of the Tube MP allows it to add warmth and fatness to a signal while maintaining exceptionally low noise and high quality.

Its primary application is to be used with a microphone. However it's also an exceptional direct box, impedance matching, amplifying and improving the sound of any instrument plugged into it.
Read more
ART Tube MP Mic Preamp (B-STOCK)
 カートに入れる
 1 in stock $89.04
Cat: 645438 Rel: 19 Mar 12
 
B-STOCK: Box damaged, product in perfect working order
Notes: ***B-STOCK: Box damaged, product in perfect working order***


The ART Tube MP Original Microphone Preamp is the world's most popular external tube microphone preamp. Whether you are working with a digital computer or analog recording system, the Tube MP's TEC award nominated design will allow you to obtain professional recording studio results. The hybrid design of the Tube MP allows it to add warmth and fatness to a signal while maintaining exceptionally low noise and high quality.

Its primary application is to be used with a microphone. However it's also an exceptional direct box, impedance matching, amplifying and improving the sound of any instrument plugged into it.
Read more
ART Tube MP Studio V3 Preamp
 カートに入れる
 2 in stock $93.84
ART Tube MP Studio V3 Preamp (tube microphone preamp)
Cat: 250316 Rel: 18 Dec 06
 
Variable voiced tube mic/instrument preamplifier
Notes: Whether you're working with a computer, hard disk or digital multi-track recorder, the Tube MP's TEC award nominated design will allow you to obtain professional results at an affordable price.

The ART preamps offer warm tone, useful features and are innovatively designed. ART's line of Tube MP products add presence, clarity and fullness to any signal and is exceptionally low noise. The ART Tube MP Studio V3 features V3 Technology (Variable Valve Voicing), which provides optimized reference points to begin the recording process. The V3 delivers a wide variety of settings designed for various microphones and DI inputs, including guitars, basses, keyboards, synths, electronic drums and much more. Don't settle for a copy cat look alike.

Go with the real thing, the Tube MP by ART.
Read more
ART Tube MP/C Mic Preamp & Compressor
 カートに入れる
 1 in stock $124.44
ART Tube MP/C Mic Preamp & Compressor (tube microphone preamp)
Cat: 450017 Rel: 16 Jul 12
 
Tube preamp and optical compressor, can be used as a mic/line preamp or as a DI (direct) box
Notes: The Tube MP/C (PreAmplifier/Compressor) is a multi-purpose tool for audio engineering and recording. 2 independent circuits featuring a tube based analog preamplifier and a VCA-less compressor with optical gain reduction control are housed in one, convenient desk-top chassis. Used as a mic/line preamp or as a DI (direct) box, the Tube MP/C is designed to work seamlessly with any recording, sound-reinforcement, or electronic instrument setup. ART's Tube MP/C circuitry is a hybrid design utilizing the latest, most advanced, solid-state and tube technology.

The preamplifier's active balanced solid-state input provides extremely low noise and excellent common mode rejection. The 14" high impedance input prevents loading of any connected device making the Tube MP/C perfect for DI or line level applications. The preamplifier's second stage 12AX7a tube runs on a regulated DC voltage providing an additional 20 dB of gain.

The compression circuit features a VCA-less design and utilises optical electronics (Vactrol) coupled with a 12AX7a vacuum tube gain stage for superior musical performance
Read more
ART USB Dual Pre PS Preamp + Audacity Audio Production Software
 カートに入れる
 1 in stock $91.13
Cat: 458049 Rel: 04 Jun 12
 
Project Series 2-channel preamplifier/computer interface with 2 x XLR cables
Notes: The USB Dual Pre is a full-featured high quality dual portable preamplifier and computer interface packed into a compact rugged case.

It is designed to work over a wide variety of applications from remote field recording to desktop/studio tracking. Each of the 2 low noise input channels has up to 48dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or 1/4" TRS. Each of the 1/4" TRS outputs is buffered low impedance balanced.

The USB Dual Pre is powered via the USB bus. An internal 9V battery, or optional external 12V power supply (or any combination of USB, battery & power supply) can be used depending on application. When running powered by battery alone, you should expect in excess of 50 hours of operation with phantom power off. Battery life will drop to approximately 20 hours (depending on microphone) when phantom powering is engaged (still enough time to get through an average session).

The built in low noise +48V phantom power supply allows you to power up to 2 microphones as well as the preamplifier when running from any power sources including the USB bus.

For monitoring, a 1/8" TRS mini headphone jack with level and monitor mix controls on the rear allow for latency free local monitoring of the inputs while recording as well as playback monitoring of the USB bus. The monitor mix is also routed to the 1/4" TRS balanced outputs. This lets you use the 1/4" outputs as either preamplifier outputs or as the monitor feed to your powered monitors.

The USB interface is fully compliant with the USB 1.1 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. It will work with the USB audio device drivers built into Windows 98SE/ME/2000/XP/Vista and Apple OS9.1/OSX computers with native USB support. No special drivers are needed.
Read more
ART USB Phono Plus V2 Audio Interface/Phono Preamplifier
 カートに入れる
 4 in stock $107.28
ART USB Phono Plus V2 Audio Interface/Phono Preamplifier (USB audio interface/phono preamplifier)
Cat: 343692 Rel: 16 Feb 09
 
acts as an interface between your computer & a wide variety of analog & digital sources, analog inputs are switchable between Phono & Line level signals
Notes: The ARTcessories USB Phono Plus v2, acts as an interface between your computer and a wide variety of analog and digital sources. The analog inputs are switchable between Phono and Line level signals and a low cut filter removes rumble and wind noise while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the A/D for a wide range of input sources. The front panel USB monitor/headphone jack and the optical output on the rear panel can monitor audio output from your computer. The built-in low noise Phono preamp circuit is highly accurate and precisely conforms to the RIAA standard. The Line Output jacks are always connected to the input preamps signal for source monitoring. Housed in an all aluminum black anodized case, the USB Phono Plus can be powered by either an external power source or directly off the USB port, so remote recording is a snap. Optical TOSLINK inputs and outputs as well as S/PDIF inputs let you use the USB Phono Plus as a digital audio to USB interface as well. The USB Phono Plus is fully compliant with the USB 1.1 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. It will work with the USB audio device drivers built into Windows 98SE/ME/2000/XP or Macs with native USB support OS9.1 or greater or OSX. No special drivers are needed.
Read more
ART X Direct Professional Active Direct DI Box
 カートに入れる
 2 in stock $39.69
Cat: 450024 Rel: 19 Mar 12
 
Active interface for connecting instrument, line, or speaker level signals to any balanced input, comes with super quality battery
Notes: The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input attenuator switches allow for a wide range of signal levels and the input link jack allows for tapping off of your signal chain. The ground lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate 2 systems, thereby reducing hum and ground-loop noise.

What further sets the Xdirect apart from other Active DI boxes are its extended features and versatility. ART have added a switchable low pass filter that cuts out all very high frequency interference. This bessel filter on the input is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filter is also very effective in reducing any digital computer noise artifacts when using the Xdirect as an interface between a computer based audio workstation and your monitors.

A phase invert switch, while not normally included with your run of the mill D.I. box, has been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.

The Xdirects active circuitry is powered by an internal 9V battery, when external power is not available. In this mode it draws 3.5 ma which should give you more than 250 hours of operation off of a new battery. If phantom power is available, then the Xdirect will automatically draw its power from the external source. The battery on/off switch lights dim when the unit is running off of the battery, lights brightly when it is running off of phantom power, and is off when the unit is inactive.

The compact black anodized all aluminum case and it's flexible power design allow the Xdirect to provide years of trouble free service in live sound, permanent/fixed install, DJ, and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the Xdirect the obvious choice whenever you have to interface high impedance sources with a low noise balanced system.

Read more
ARTcessories HeadAMP4 Headphone Amplifier
 カートに入れる
 1 in stock $60.06
Cat: 450027 Rel: 19 Mar 12
 
4-channel amplifier, with individual volume controls
Notes: The HeadAmp4 offers 1/8" as well as 1/4" inputs and outputs as well as lower noise, lower distortion and more output in a new custom extruded stackable metal case.

Ideal for virtually any home or project studio, the ARTcessories HeadAmp4 easily adds additional headphone outputs to any mixer, computer audio interface, workstation, iPod, media player or laptop without creating any additional load on the existing headphone source.

Individual level controls for the 4 x headphone outputs, 1/4" and now 1/8" connections allow the HeadAmp4 to connect to virtually any source, and drive any headphone configuration including studio phones, in-ear monitors or custom ear pieces or any combination of the above.
Read more
133/33(ページ1/1)の商品
Labels
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close