The Shure N447 Stylus is for use with Shure M44 & M44-7 cartridges.
With a frequency response of 16Hz to 22kHz, an impedance of 70 ohms and a maximum SPL of 120dB, the HD 25 headphones are ideal for any monitoring application; whether broadcasting, live recording, in the DJ booth or just travelling from venue to venue.
The Shure N-WHLB is a truly revolutionary piece of DJ technology. Tailored for the club environment, the White Label features sonic characteristics including solid drop bass, flat mids and accented highs. With a sleek and ergonomic design, the cartridge additionally delivers higher trackability, lower tone-arm resonance and better skip resistance. It also includes an adjustable stylus overhang, reliable electrical contact and improved stylus visibility.
More than 10 in stock $74.73
Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
The only difference between the two models is that the M44-7-H comes pre-mounted on a Technics headshell virtually eliminating set up time. The M44-7 does not include a headshell so one will need to be provided in order to use the cartridge on your turntable. Both models include one stylus and an accessory kit that features a headshell screwdriver, stylus cleaning brush and headshell weight.
9 in stock $36.81
Decksavers are specifically designed to keep your technology investment safe and sound. Decksavers are tailor-made to exacting standards to fit the Technics turntable like a glove. Rather than using cheaper inferior acrylic, each one is made from polycarbonate, a very hardwearing plastic used in bullet proof glass, and made to fit your gear as closely as possible. The use of polycarbonate means that thinner material can be used, making for discrete, strong yet attractive protection for your Technics turntable. Indeed, great care is taken to trim each Decksaver to achieve the best fit and still leave cables in place.
The cover has a very strong contruction with sufficient flat areas allowing support for CDJs, laptops, midi controllers, etc.
The conductivity of the brush's carbon fibre bristles eliminates static charges while gently and efficiently removing the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound.
The conductive carbon fibres reach deep into the grooves of your vinyl to remove even the smallest particles, leaving your records clean while prolonging the life of vinyl and stylus.
- Hand-made carbon hair brush for removing dust from vinyl records
- The brush makes the record antistatic so it does not attract dust
- For those who care for their collection of vintage or brand new vinyl records
- Can also be used for Schellack records
One end of this wire has a spade lug connection, whilst the other is bare wire.
Engineered to create a comfortable listening environment in areas with high ambient noise, these in-ear headphones feature a miniature microphone in each earpiece that picks up ambient noise (such as traffic, air-handling systems, etc.). Electronics in the QuietPoint control module create a noise cancelling wave that is 180- out of phase with the ambient noise. This wave acts like a noise eraser: it cancels out the annoying sounds that surround you without diminishing the audio you want to hear. The result...a peaceful enclave to enjoy the music or movies of your choice.
The ATH-ANC33iS in-ear headphones also feature an inline microphone and controller for answering calls and controlling music. The mic and controller support smartphones, iPhones, iPads, many iPods & other compatible devices. The microphone has an omnidirectional pickup pattern and it is designed for crisp intelligibility, so your voice will be clearly transmitted without having to speak directly into the mic.
More than 10 in stock $31.41
The PLUS version also comes with a handy storage pouch and a second set of ear pads in a soft velour version.
Minirig is an independent audio brand from Bristol (UK), originally inspired by the local soundsystem culture, now taking on, and outperforming, the leading global brands in the portable audio market. Designed and hand-built in Britain, Minirig has won plaudits worldwide for its Bluetooth speaker design, best-in-class battery life and its well-deserved reputation, as the loudest Bluetooth speaker of its size on the market.
Minirig co-founders David Trotter and Tom Tucker comment, "We take battery life and sound quality very seriously here at Minirig. Who wants a portable speaker that only lasts a couple of hours?"
Minirig engineers have now managed to increase battery life to an incredible 80 hours. Whether it's travel, festivals or a big weekender, the Minirig will last as long as you can. The powerful battery can hold its charge for months and also allows for any other USB device to be charged via the Minirig (iPhone 7 recharge approx 2.5 times).
Sound performance is central to the cult status enjoyed by the Minirig brand, and there are significant enhancements in this area. Many hours of development have enabled the design of an extra-large, custom 3" driver, increasing bass response and off-axis response. Together with a 15W amp, this unleashes an extremely powerful yet clean sound. An adaptive audio filter ensures the Minirig delivers the best sound whatever the volume.
Minirig's modular design allows you to Bluetooth connect to a second Minirig, offering true wireless stereo. You can then add a Minirig subwoofer with 30W amp (the smallest, powered portable sub in the world) to create a fully portable 2.1 system, that delivers a sound that can shake the leaves from the trees.
Another key innovation in the revamped Minirig design is the 'over the air' updating function, which, even after purchase, allows for further improvements to be made to the speaker. These may include such things as a custom EQ, or more upgrades to battery life. Minirig features the latest Bluetooth 4.0 APT-X tech and advanced connectivity options are available via the bespoke Minirig app (available for iOS and Android). The over the air updater is a welcome addition in the move towards a future-proof speaker.
The Minirig features a tough, anodised aluminium and textured polycarbonate design, plus an improved IPX5 rated water and dust resistance, making it a perfect speaker for any outdoors lifestyle, while its minimal styling mean it's equally suitable for home use. Minirig have added a brushed aluminium finish to the existing seven colour range, to ensure a look for all tastes.
Made from the finest but strongest felt material, DMC slipmats are the No.1 choice for DJs and vinyl lovers across the World. Dependable & hard wearing, they are also resistant to dust & other particles, so will not scuff, scratch or damage vinyl.
Great for your home, studio, club or in competition, these superior slipmats are your turntable and vinyl's best friend.
The new Performance Series pressings are packaged as a double set and feature a wide range of new colours.
This preset has been configured with the titanium-coated S02 speaker unit that delivers a punchy and intense sound representation, focusing on bass and low end dynamics. The combination of the durable H02 nylon headband and the E02 on-ear PU leather earpads, which provides high isolation, results in a powerful, sturdy headphone suitable for live performance and electronic/bass heavy music.
Engineered with a 40mm titanium-coated driver to reduce distortion, and designed with an internal vent allowing the middle bass to be more clear and punchy, which is great for picking up the beat. A gradual dip towards the high frequencies prevent listening fatigue.
The Speaker Unit housing is injected moulded from durable ABS material and coated with rubber to give a matte look with a soft feeling. Both plugs feature a cable lock that securely locks the cable in place.
New reinforced injection-moulded headband made from the best engineering nylon grade available. A durable compression moulded silicone headpad gives a better grip and the rugged headband is easy to clean after a long night in the club.
Gold plated plugs ensure optimal connection to your speaker units and the cable locks keeps the cable in place.
Soft on-ear foam cushion covered with PU leather. The thickness of the cushion and the materials used give a closed and intense sound representation. Produces strong bass and low end dynamics.
High isolation. Good for DJing and electronic music. Centred sound stage and high isolation. Height 20 mm. Outer diameter 70mm. Inner diameter 32mm.
Coiled, black, 1.5m thermo plastic cable with soft touch surface. Extends up to 3.2m. Perfect for DJing or small studio use. Comes with 1/4" to 1/8" screw-on adaptor.
The preamplifier can be powered by mains outlet or battery, thus avoiding additional cable clutter during DJ sets.
MusicSafe Pro is the only hearing protection for musicians with three exchangeable filter sets for low, medium and high protection. These unique AlpineAcousticFilters with selective absorption guarantee optimal protection against harmful noise levels, while preserving excellent music quality. Depending on the instrument you are playing, your position on the stage or the kind of music you are playing, you can always choose the protection that suits you most. The Alpine MusicSafe Pro earplugs do not make you feel isolated, allowing you to remain in touch with your surroundings, for instance during a studio recording. This allows for optimal performance.
The MusicSafe Pro acoustic earplugs are produced from very soft, flexible and durable AlpineThermoShape material. Due to the warmth of the ear it adapts to the shape of the auditory duct. Therefore, MusicSafe Pro is very comfortable to wear. Should the earplug be too big, you can easily adjust it to the right size.
The safe and statutory limit to which the hearing may be exposed is 80 decibel. Regular noise above 80 decibels will irrevocably lead to hearing damage. Official reports show that the limit of 80 dB is soon exceeded. For instance, at concerts, noise levels up to 120 dB can be measures. For rock musicians, the harmful noises are mainly produced by the drums and the amplifiers, whereas for classical musicians, their own instruments and those of others greatly affect their hearing. The following values shows how soon the maximum exposing time is reached:
Noise level Maximum exposure without hearing protection
86 dB 2 hours
89 dB 1 hour
92 dB 30 minutes
94 dB 15 minutes
98 dB 7 minutes
102 dB 3 minutes
106 dB 90 seconds
Depending on your situation, the instrument you're playing and where you are playing it, you can choose your own absorption. For instance, as a drummer, you'll require higher absorption levels than when you're a singer.
MusicSafe Pro earplugs last longer if you if you look after them. Clean them regularly using lukewarm water and a little soap.
Thanks to the feedback of customers like yourself, the Pro2 now fits more mixers than ever, all without modification. The adapter boards are already insulated and marked clearly to show you the specific one you need for your mixer.
To take advantage of all of the Innofader Pro2 adjustability, we recommend you purchase an Innojuster. This allows you to access Innofader Pro2 control dials plus the calibration button from outside the mixer.
Made from the finest but strongest felt material, these slipmats are the No.1 choice for DJs and vinyl lovers across the World. Dependable & hard wearing, they are also resistant to dust & other particles, so will not scuff, scratch or damage vinyl.
Great for your home, studio, club or in competition, these superior slipmats are your turntable and vinyl's best friend.
Classic Technics logo embroidered in silver
Hard-wearing, durable fabric
Protects against dust and grime
Ideal replacement for ugly or damaged lids
Dimensions 18 x 14 x 6.75 inches (45 x 35 x 17 cm)
Black (silver embroidery)
Part number SFXG122-01(A).
Fits Mk2 Mk3 and Mk5 turntables.
Part number SNSB9-3.
This is the replacement for SNSB9-2 for Mk 2 turntables.
The M35X combines high sonic accuracy and incredible skip resistance, all while keeping record wear to a minimum.
More than 10 in stock $118.05
Tailored for the club environment, the Whitelabel features sonic characteristics including solid drop bass, flat mids, and accented highs. With a sleek and ergonomic design, the cartridge additionally delivers higher trackability, lower tone-arm resonance and better skip resistance. It also includes an adjustable stylus overhang, reliable electrical contact and improved stylus visibility.
This sturdy & stylish shoulder bag holds up to 25 x 12 inch records.
Comes with additional Mukatsuku goodies such as vintage leather embossed keyring with brass fob ,stickers and button badge !
NB. Colour of lining might differ from image