Back catalogue: All genres

Notes: The MW Step Down Voltage Converter Adapter allows 110V-120V appliances to be used in 220V-240V countries. It featues 2-pin input and 3-pin outout; and it is suitable for appliances up to 45W.

Notes: The original favourite and improved Magma classic. Now with loads more strength thanks to the new improved trolley-board system. Unbeatable for the DJ who is on the road a lot, the 100 trolley is a proven, practical and convenient transport solution.

The materials used, the design of the new reinforced fivefold glued bottom board and extra strong front stand, are all tested to ensure the highest strength possible and guarantee the best stability and a long life.

Notes: Based on the standard jewel case, this jewel case is only 6mm thick. It is ideal for CD audio singles and with the absence of a rear inlay card savings can be made.

Naturally using CD 6mm jewel cases, the packaging bulk will be reduced and makes shipping and storage much easier.

Notes: Double adapter splitter plug, pair of female stereo 3.5mm mini-jack to male stereo 3.5mm mini-jack plug.

Notes: A simple adapter that allows easy connection of any 6.3mm (1/4") jack connector to a 3.5mm phono/RCA socket.

Notes: The socket with durable metal construction with polished nickel finish, is recommended for demanding professional, studio, recording and live performance applications.

The stereo channels on the stereo female mini jack are combined to a single mono signal on the full-sized male mono jack. It is ideal for plugging mini jack cables from a stereo source (iPod, MP3, portable CD, laptop/notebook/desktop PC, Apple Mac etc) into equipment expecting a mono input (amps, mixing desk, in-ear monitors/earphones etc).

The socket is used to connect cables and plug headphones, microphones, speakers fitted with cables terminated in 3.5mm mini jack plugs into equipment with full size 6.3mm (1/4") jack sockets.

Notes: 3 pin XLR plug to RCA phono socket.

Notes: Right angle (6.3mm) stereo jack plug to (6.3mm) stereo jack socket adapter plug.

Notes: 6.3mm stereo jack plug to 3.5mm stereo mini-jack socket, gold-plated for optimum signal transfer.

Notes: 6.35mm mono Jack plug to phono (RCA) socket, metal.

Notes: Compact phono stage to boost turntable output to line level. Add turntable inputs or upgrade the sound of your DJ mixer. Adjustable capacitance and gain to suit a range of cartridges.

Supplier's notes:
The DJ PRE II acts as an interface between your turntable and your audio recording/playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card. Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.

Notes: The lightweight and affordable stereo headphones feature an adjustable headband and a 1.25m lead with 3.5mm stereo jack plug. Ideal for educational, tour company or home use.

Ideal for use by students, tour companies or in the home
Compatible with computers, MP3 players and other equipment
Lightweight design with adjustable headband for comfort
Featuring a generous 1.25m lead for greater flexibility

Notes: 3.5mm stereo mini jack plug to 6.3mm jack socket.

Notes: 6.3mm stereo Jack plug to 3.5mm stereo Jack socket. All metal version.

Notes: Offspring from a noble house, the little synthesizer machine with the big and evil sound.

Waldorf is back in the game. With the Blofeld.

This synthesizer offers all the unique qualities that made Waldorf a truly legendary brand.

The engine inside the heavy duty, full metal chassis of the Blofeld delivers the same fat and rich sound that so many Waldorf users worldwide love when they play their pulse, Q, Q+, micro Q, microwave, microwave II/XT, or even the flagship wave.

Notes: 3 ft long DIN to DIN MIDI cable. (red)

Notes: Incorporating a new hidden trolley system, smooth rolling in-line wheels, electroplated zippers and integrated combination lock, the world's best selling 12" trolley bag has been reinforced and strengthened to provide you with even greater protection and durability. The Slingbag will hold approximately 65 records.

Notes: Incorporating a hidden trolley system, smooth rolling in-line wheels, electroplated zippers and integrated combination lock, the world's best selling 12" trolley bag has been reinforced and strengthened to provide you with even greater protection and durability. The UDG Slingbag Trolley Set Deluxe will hold approximately 65 vinyl records and the Slingbag approximately 45 vinyl records.

Notes: A custom gold plated adapter that allows you to use equipment requiring a 6.35mm jack. Ideal for HD25, HD25SP and HP215 headphones from Sennheiser.

Notes: The 3.5mm mini jack stereo headphone splitter cable allows two pairs of headphones to listen to one iPod/iPhone/iPad.

Notes: The Citronic compact laptop stand supports laptop computers, audio interfaces and other DJ equipment and allows for positioning above other equipment at a fixed 15 degree angle for easy viewing. It can be assembled in 5 different height settings and has high density foam pads on the support arms and lower skids to prevent damage and slipping

Notes: A high quality MIDI cable for connecting music controllers and devices together. Strong and flexible cable comes with low loss conductors and global shielding ensure a clean data stream. It is terminated at each end with a 180- 5-pin DIN plug.

Notes: The Allen & Heath ZED-14 is a fantastic entry-level mixer for small bands, solo performers or AV applications. Its comprehensive feature set, compact size and fine lines combine to make it one of the best small mixers around. Provided with 6 mic or line inputs, 4 stereo inputs with EQ, there are an incredible 157 controls on the front panel of the ZED-14.

This is a mixer for anyone, from entry-level to professionals, who appreciates fantastic sound, rugged build quality and imaginative feature sets. It'll be equally happy running your gig on stage, recording live or mixing down in your studio at home.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS
1) Main Mix Left + Right (Post-fade)
2) Main Mix Left + Right (Pre-Fade)
3) Auxes 1-2
4) Auxes 3-4

RETURN OPTIONS
1) To Stereo 3 channel

ZED-10 features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ- with optimised slope (or Q factor) for equalising individual instruments.

Based on the proven pre-amps from the hugely successful PA series, ZED-14 has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

Notes: One of the hardest in the game. Dedicated kick drum synth from analogue experts Vermona. Shape your own sounds from scratch. Killer.

Supplier's notes:
The Kick Lancet generator is a handy analogue percussion synthesizer with priority to kick-drum sounds.

The heart of the Kick Lancet's sound structure is an analogue oscillator that produces sine and square waves, which can blend seamlessly from one to the other. 2 independent envelope generators with a decay/release phase can modulate the oscillator's frequency and the VCA. Additionally the VCO pitch can be modulated by the fast LFO (3Hz to 3 kHz, triangle). Noise and a pulse signal can be added in the mixer section. Vermona have a balls-controller for making it really big.

The Kick Lancet can be triggered by MIDI but beside that there are 3 different trigger inputs. A gate trigger, which impulse can trigger the Kick Lancet in normal way with additional accent or completely dynamical depending on the incoming voltage, a simply short current trigger (i.e. momentary foot switch) and an audio input, which offers the possibility to trigger the Kick Lancet by an audio signal statically or dynamically. Drum pads can also be connected here.

Notes: The Korg NanoKontrol2 slim-line USB control surface fits perfectly in front of your laptop computer or desktop keyboard, offering impressive control while conserving valuable set-up space.

The Korg NanoKontrol2 controller provides knobs, switches and faders. It is perfect for controlling any DAW computer based DAW or numerous types of other music production software.

In a body proportioned to fit perfectly in front of your laptop computer, the Korg NanoKontrol2 provides 8 channels of the controllers you need to control your music software. It also features a dedicated transport control section. Many software titles are supported, dramatically reducing the need to make complicated connection settings. 1 knob, 1 fader and 3 switches are provided for each of the 8 channels, respectively assigned to pan, volume and solo/mute/record. In addition, there's also a marker button, making it easy to assign marks at important points in your song for more efficient recording and song production.

Notes: The Glorious 12" record box 230 is a plain and solid storage system which holds 230 12" records. It is made of quality MDF wood with black shrink-wrap finish.

Notes: The Glorious 12" record box 55 is a plain and solid storage system for 12" records which holds 55 12" records. It is made of quality MDF wood with black shrink-wrap finish.

Notes: The Glorious 12" record box 55 is a plain and solid storage system for 12" records which holds 55 12" records. It is made of quality MDF wood with white shrink-wrap finish.

Notes: The Zomo VS-Box 200 is a practical way to store your vinyl in a stylish and efficient way.

The VS-Box 200 is made of solid wood and laminated with tough water-repellent decor. This model is easy to install, multi-stackable and can be combined with other VS-Boxes. The Box is also compatible to vinyls in protection covers. The capacity can be various by the thickness of your vinyl.

Notes: The Pro Tools is back and this time Avid did something Ask Video never thought would happen. You can now use nearly any audio interface you like to work in Pro Tools. This opens up the program to many new users and we want to make sure you're up to speed.

In Level 1 of this 3 part series Ask Video are going to take you through everything you need to know to get started. Ask Video are going to start right at the beginning by getting your audio card setup and taking a tour of the Edit and Mix windows. After that Ask Video will move into recording and editing, and finish up with a few chapters on some of the instruments in Pro Tools.

If you're new to Pro Tools than this tutorial is perfect. It's also great for those of you coming back to the program now that you can use any interface you like. Watching Level 1 is a great way to refresh yourself.

QuickTime 7.x Mac/PC is required for video playback. DVD-Rom drive required for Mac/PC DVD-ROM.

Notes: The Pro Tools is back and this time Avid did something Ask Video never thought would happen. You can now use nearly any audio interface you like to work in Pro Tools. This opens up the program to many new users and we want to make sure you're up to speed.

In Level 2 of this 3 part series Ask Video are going to build on the principles and techniques learned in Level 1 and start looking at some of Pro Tools' advanced features. Ask Video are going to introduce you to the advanced recording techniques, delve deeper into audio editing and mixing, and finish up by taking a look at Structure and Vacuum.

This tutorial is great for Pro Tools users that feel like they've got the basics down and are ready to learn something new.

QuickTime 7.x Mac/PC is required for video playback. DVD-Rom drive is required for Mac/PC DVD-ROM.

Notes: The EarPortz eartips with their uniquely pre-formed ear canal shape will enhance your ability to hear much more clearly. They work simply by directing the sound from your earphones deeper into your ear, aimed directly at the ear drum. The sound becomes much more focused and every note clearly defined.

The EarPortz's soft and durable design will keep your earphones securely in place allowing you to move freely without the worry of them slipping out. The EarPortz eartips are manufactured in a soft silicone-rubber material together with their unique ear canal shape will make your earphones comfortable even after wearing for long periods of time.

The EarPortz eartips will give you the ability to hear at a lower volume setting due to their superb sound isolation, blocking annoying sounds from entering your ears and also leaking out. They allow you to hear what you want to hear without turning the volume to damagingly high levels.

The EarPortz Eartips will fit the following earphones:
Shure E3c, E4c, E5c, E3g, E4g, E500, i3c, i4c, SCL3, SCL4, SCL5, SE 110, SE 115, SE 210, SE 215, SE 310, SE 315, SE 420, SE 425, SE 530, SE 535;
Westone UM-1, UM-2, UM-3X, Westone 1, 2, 3, 4;
Future Sonics Atrio Series (all);
Ultimate Ears Super Fi 3 Studio, Super.Fi 5 Pro, Super.Fi 5 EB;
Ultimate Ears Triple Fi 10 Pro;
Comply NR-1 CM mobile phone earset, NR-1 CS mobile phone earset, NR-1 earphones and NR-10 earphones.
Etymotic Research ER-4B, ER-4P, ER-4S, Ety-8; and
Bluetooth Earphones: HF-2, HF-3, HF-5, MC-3, MC-5.

The EarPortz eartips are also available in sizes: extra small (suitable for children or those with small ear canals), small fit, medium fit (suitable for most people) and large fit.

Notes: The Mobile Fidelity Shine-Ola is a CD/DVD/SACD cleaner designed to provide a gentle, scratch-free way to clean your discs. Unlike other cleaners, the Mobile Fidelity Shine-Ola is safe for use on SACDs. It's not a disc treatment system, but rather a pure cleaner that will not break down a disc's polymers. It removes the heat-generated waste molecules left behind by the pressing process, thus preventing laser-wandering.

The Mobile Fidelity Shine-Ola is provided with an ultra-soft 3M micro fiber cloth for easy and safe cleaning. It works on discs that are either pressed or burned.

Each 2 0z bottle of Shine-ola will clean approximately 200 CDs, however, if you spray carefully enough to cover the entire disc in one spray, you can get up to 350 uses.

Notes: Never let it be said Suck UK don't dabble in science. In the name of completely misunderstanding Schrodinger's work, Suck UK introduce their newest cat/box combination, the scratch mat. The cats scratch furniture to mark their territory, exercise their muscles and for sheer pleasure. All similar reasons youths mix music and if you are to cross over both those cultures you'd rather get cats mixing music than teenage boys bringing bedraggled birds back to your doorstep.

The decks come flat packed and fold together into a simple structure with poseable tone arm and a top which spins as your cat paws at it, meaning you can sit and giggle in a look the cat is doing human things way rather than watch in horror as she shreds your favourite couch into tiny pieces.

Notes: A good delay was an essential part of the classic analog synthesizer sound. More often than not, that delay came from a tape-style echo machine until affordable digital delays were created. The Monotron Delay is an analog synthesizer optimized for sound effects. In addition to its analog oscillator, filter and LFO, it also provides a space delay that's indispensible for swooping, cosmic sounds. The monotron Delay even reproduces the pitch changes that occur when you vary the delay time, just as though you were using an analog tape echo. This fat and warm delay will add an authentic edge to your analog sounds.

It also features Korg's class VCF filter for full control over your sounds. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Delay uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.

Create classic sounding analogue tape delays to add warms and new dimensions to your synth sounds. Also included is Korg's fantastic enhanced ribbon controller keyboard, while a mini jack input also allows you to run any external audio, such as a Kaossilator, digital piano or guitar, through the Monotron Duo. As standard, the Monotron range comes with a powerful built-in speakers and is battery operated for the ultimate portable experience.

The Low Frequency Oscillator (LFO) waveform used to modulate the pitch now offers a choice of waveshapes, which is a new square wave plus the traditional triangle wave. Both the rate (speed) and the intensity (depth) can be adjusted independently. In addition, a trimpot on the back panel can continuously adjust the shape/direction of the triangle wave or the pulse-width of the square wave to deliver even more versatility. Used in conjunction with the delay, the LFO can create dazzling effects and provide unique possibilities for embellishing your songs.

The Monotron Delay's ribbon controller keyboard features a wide, 4-octave range. This design allows the pitch to be controlled even more aggressively and dynamically, making the Monotron Delay a great weapon for a DJ to get the floor moving with irresistible sound. The reversed white keys and body adornments glows under black light illumination, making the monotron Delay ideal for delivering a striking visual impact in nearly any club environment.

The input jack (AUX input) built into the Monotron Delay's compact body allow you to place any audio source into the Monotron Delay's signal path, directly before the analog filter and delay circuit. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter and delay effect.

A miniature speaker is built into the Monotron Delay. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Delay's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.

Notes: The Korg Monotron Duo is capable of creating even stranger, extreme and diverse sounds. The combination of 2 oscillators in unison provide thick, rich analogue tones, while tuning them to different intervals can create classic solo synth sounds and powerful effects. Korg have utilized their X-Mod (cross modulation taken from their classic Mono/Poly synths) circuitry in the Monontron Duo, enabling you to generate the mildest of sounds, to vibrant vibrato, to sharp, fm style abrasive synth sounds.

The Monotron Duo features Korg's fantastic enhanced ribbon controller keyboard and now features the same scale function as used on the Kaossilator, chromatic, major, minor or off scales are available, allowing your music juices to flow freely over any music. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Duo uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.

The input jack (AUX input) built into the Monotron Duo's compact body allow you to place any audio source into the Monotron Duo's signal path, directly before the analog filter. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter effects.

A miniature speaker is built into the Monotron Duo. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Duo's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.

http://www.youtube.com/watch?v=wWLOxRSll5Q

Notes: Native Scratch technology features newly-designed Traktor Scratch MK2 timecode for incredible scratch performance and more authentic vinyl feel.

The Native Instruments Traktor Scratch Control Vinyl MK2 is designed for use with Native Instruments Traktor Scratch. It also works with Traktor Scratch Pro. Native Scratch's new MK2 timecode is compatible with all next generation Traktor Scratch products when using the free Traktor 2.1.1 service update.

Notes: Native Scratch technology features newly-designed Traktor Scratch MK2 timecode for incredible scratch performance and more authentic vinyl feel.

The Native Instruments Traktor Scratch Control Vinyl MK2 is designed for use with Native Instruments Traktor Scratch. It also works with Traktor Scratch Pro. Native Scratch's new MK2 timecode is compatible with all next generation Traktor Scratch products when using the free Traktor 2.1.1 service update.

Notes: Native Scratch technology features newly-designed Traktor Scratch MK2 timecode for incredible scratch performance and more authentic vinyl feel.

The Native Instruments Traktor Scratch Control Vinyl MK2 is designed for use with Native Instruments Traktor Scratch. It also works with Traktor Scratch Pro. Native Scratch's new MK2 timecode is compatible with all next generation Traktor Scratch products when using the free Traktor 2.1.1 service update.

Notes: The white 1.2m heavy duty 4 core screened 5-pin MIDI plug to 5 pin MIDI plug is designed to use with most MIDI products such as keyboards, lighting controllers etc..

Notes: The new PerFourMer is a real analog synthesizer, through its simple control surface and very flexible sound production it is able to offer a near inexhaustible variety of Bass, Lead, Pad and Effect sounds. Additionally, with its total of six filter inputs, the PerFourMer is also perfectly suited as a complex filter-bank. Even though the PerFourMer is not considered a modular system, it can still be described as a modular or at the very least a semi-modular. The basic concept is reminiscent of classics such as the Oberheim 4 Voice or the Korg Monopoly.

The PerFourMer is a 4 voice synthesizer, consisting of completely independent synthesizers, which can be adjusted and played independently from each other. These four synthesizer channels can be linked with each other and be played in 3 different operating modes.

Next to the already mentioned filter inputs, each channel has a single output, which can also be used as an insert for external effect devices, and make it possible to easily integrate the PerFourMer with already established equipment. It is also possible to transmit the unedited VCO signal. Additionally the opportunities of the PerFourMer can be expanded through internal patching between the channels, for example; you can route a VCO through multiple filters and VCAs, or use 2 channels to create 1 voice with 2 ADSR envelopes (1 for VCA and 1 for VCF). Use the PerFourMer as a filter-bank and the slope envelope can be doubled by interconnecting the filter in series. The PerFourMer is controlled via MIDI and additionally via CV/gate (1V/octave) inputs for every synthesizer channel.

Notes: The new PerFourMer is a real analog synthesizer, through its simple control surface and very flexible sound production it is able to offer a near inexhaustible variety of bass, lead, pad and effect sounds. Additionally, with its total of 6 filter inputs, the PerFourMer is also perfectly suited as a complex filter-bank. Even though the PerFourMer is not considered a modular system, it can still be described as a modular or at the very least a semi-modular. The basic concept is reminiscent of classics such as the Oberheim 4 Voice or the Korg Monopoly.

The PerFourMer is a 4 voice synthesizer, consisting of completely independent synthesizers, which can be adjusted and played independently from each other. These 4 synthesizer channels can be linked with each other and be played in 3 different operating modes.

Next to the already mentioned filter inputs, each channel has a single output, which can also be used as an insert for external effect devices, and make it possible to easily integrate the PerFourMer with already established equipment. It is also possible to transmit the unedited VCO signal. Additionally the opportunities of the PerFourMer can be expanded through internal patching between the channels, for example; you can route a VCO through multiple filters and VCAs, or use 2 channels to create 1 voice with 2 ADSR envelopes (1 for VCA and 1 for VCF). Use the PerFourMer as a filter-bank and the slope envelope can be doubled by interconnecting the filter in series. The PerFourMer is controlled via MIDI.

www.youtube.com/watch?v=UWFsfUa9pUk

Notes: Neatly designed slimline DJ MIDI controller from A&H. 52 controls and built-in audio interface. Compatible with any DJ software.

Supplier's notes:
Xone:K2 is a compact, slim line universal MIDI controller - incorporating a 4 channel soundcard, for use with any DJ software.

With no fewer than 52 hardware controls providing up to 171 MIDI commands across 3 layers - plus the ability to link multiple units using X:LINK, saving USB ports on your computer - Xone:K2 has the power and flexibility to put you in touch with the functions and features of your chosen software.

Quick and simple mapping lets you create a unique layout that mirrors your style and puts the functions that matter at your fingertips, whilst 3 colour illuminating switches give at-a-glance feedback - allowing you to work however you decide.

The high quality internal soundcard provides flexible user setup options using the Xone:K2 with headphones, headphones and a mix system or with an external mixer. Xone:K2 comes packed in a black padded case as standard. The case doubles as a stand, bringing the K2 up to the same height as most pro DJ mixers.

Xone:K2 is a compact designed MIDI Controller for use with any DJ software such as Ableton, Virtual DJ, MixVibes, Mixx and Traktor Pro. Xone:K2 can even be used to control lights or VJ software - if it can receive MIDI data it can take commands from K2. What each control does is entirely up to you - you can create a completely customised layout that perfectly fits the way you want to work. Xone:K2 has 52 physical controls - including 12 analogue and 6 endless rotary encoders with push switch, 4 linear faders, and 30 backlit performance switches - providing up to 171 MIDI control commands across 3 layers. We also provide example maps to get you started out the box and information on how to set up your own.

A Latching Layers system lets you assign controls to multiple layers, so a single physical control can be given up to 3 functions. You can configure all, some or none of K2's controls to be linked to the Latching Layers system. As a quick visual reminder, when toggling through layers all switches assigned to a particular layer will illuminate in the appropriate colour.

Xone:K2 has a high quality internal, four channel (2 stereo) 48kHz soundcard. Setup options include using the K2 with a pair of headphones, feeding a pair of headphones and a PA system, or connecting to an external DJ mixer.

Its slim line chassis, soft touch controls and minimal looks set K2 apart from the pack. There's plenty of substance too - Xone:K2 is built to Allen & Heath's renowned touring grade audio and build quality standards, including the use of steel nuts on all rotary controls to protect the circuitry from impact damage.

Xone:K2 comes packed in a black padded case as standard. As well as keeping it safe on the road, the case doubles as a stand, elevating the K2 up to the same height as most pro DJ mixers.

Two or more K2s can be linked via our X:LINK protocol, expanding the control capability. X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, including Xone:DB4 and DB2, to expand MIDI data without using additional USB ports.

Notes: The Allen & Heath ZED-10 mixer is an amazing little desk for small band mixing. It is ultra portable for carrying to the gig, and can be used for recording live or in the studio. It comes with configurable USB audio input/output making it easy to capture stereo recordings.

Guitars can be plugged in directly to the mixer using the specially designed high-impedance inputs, while the mixer has two stereo inputs for MP3/CD players or keyboards.

Equipped with professional XLR stereo outputs and a flexible monitoring section with headphone and speaker feed outputs. The ZED-10 is bundled with IK Multimedia's AmpliTube X-GEAR software, giving access to superbly modelled amps and effects.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED-10 is super-flexible and super-easy. No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED-10, select the USB routing on the mixer and the device on your computer and that's it. CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations.

SEND OPTIONS
1) Main Mix Left + Right (Post master Level)
2) Aux + FX bus (Aux is a pre-fade send, FX is a post-fade send)
3) Record Bus Left + Right (Separate stereo bus to Main Mix)

RETURN OPTIONS
1) To Playback input (through jack socket break contacts)
2) To Stereo 2 channel (through jack socket break contacts)

ZED-10 features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-10's pre-amps are similar in design to our MixWizard range of mixers, but with a twist! Inputs 3 & 4 have a high impedance jack input capable of taking either a normal line level or a low level input from a guitar pickup. These newly designed inputs have been crafted with the aim of replicating the sound of a classic guitar or instrument tube pre-amp in a combo or head amp. An extremely high input impedance ensures loading on pick-ups is minimal and a Class A FET (field effect transistor) circuit powered from 48V is employed to give the valve-like gain stage. There is a gain "Boost" switch associated with the guitar inputs which boosts gain by 26dB to cater for instruments with very low level outputs and the overdrive characteristics of the guitar inputs are very similar to a valve (tube) circuit, being asymmetric and soft. All this makes for a wonderfully natural sound to be reproduced from the instrument, full of warmth and character

Notes: Ten-channel version of one of the most cost-effective mixers on the market. Great sound, good EQ and handy built-in effects. Check out the 12-channel version if you prefer faders for level control.

Supplier's notes:
The Allen & Heath ZED-10FX mixer is an amazing little desk for small band mixing. It is ultra portable for carrying to the gig, and can be used for recording live or in the studio. It comes with configurable USB audio in/out making it easy to capture stereo recordings.

Guitars can be plugged in directly to the mixer using the specially designed high-impedance inputs, while the mixer has two stereo inputs for MP3/CD players or keyboards. Equipped with professional XLR stereo outputs and a flexible monitoring section with headphone and speaker feed outputs. We've added a set of fabulous effects to give shimmering reverbs and enhance your sound.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS:
1) Main Mix Left + Right (Post master Level)

2) Aux + FX bus (Aux is a pre-fade send, FX is a post-fade send)

3) Record Bus Left + Right (Separate stereo bus to Main Mix)

RETURN OPTIONS:
1) To Playback input (through jack socket break contacts)

2) To Stereo 2 channel (through jack socket break contacts)

ZED-10FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-10FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point - this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

ZED-10FX's pre-amps are similar in design to our MixWizard range of mixers, but with a twist! Inputs 3 & 4 have a high impedance jack input capable of taking either a normal line level or a low level input from a guitar pickup. These newly designed inputs have been crafted with the aim of replicating the sound of a classic guitar or instrument tube pre-amp in a combo or head amp. An extremely high input impedance ensures loading on pick-ups is minimal and a Class A FET (field effect transistor) circuit powered from 48V is employed to give the valve-like gain stage. There is a gain "Boost" switch associated with the guitar inputs which boosts gain by 26dB to cater for instruments with very low level outputs and the overdrive characteristics of the guitar inputs are very similar to a valve (tube) circuit, being asymmetric and soft. All this makes for a wonderfully natural sound to be reproduced from the instrument, full of warmth and character.

The ZED-10FX is bundled with IK Multimedia's AmpliTube X-GEAR software, giving access to superbly modelled amps and effects.

Notes: The ZED-12FX is ideal for groups who need to travel light. Even with its small footprint, the 12FX squeezes in 4 auxiliary channels and swept semi-parametric EQ on top of the already impressive feature set including configurable USB audio in/out makes it easy to capture stereo recordings.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED-12FX is super-flexible and super-easy. No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS
1) Main Mix Left + Right (Post-fade)
2) Main Mix Left + Right (Pre-Fade)
3) Auxes 1-2
4) Auxes 3-4

RETURN OPTIONS
1) To Stereo 3 channel

MUSIQ
ZED-12FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-12FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point - this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

Based on the proven pre-amps from the hugely successful PA series, ZED-12FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a
higher input impedance.