Therefore, excellent hearing protection is essential during repetitions, performances and concerts. Alpine luxury model MusicSafe Pro has been specifically developed for performers.
MusicSafe Pro contains three different and exchangeable sets of music filters with outstanding sound characteristics with low, medium and high attenuation rates. These special music filters guarantee an optimal protection without loss of clarity, while at the same time you can perfectly enjoy the music.
MusicSafe Pro earplugs are produced from a very soft, flexible and durable thermoplastic material. Due to the warmth of the ear it adapts to the shape of the auditory duct. Therefore, MusicSafe Pro is very comfortable to wear. MusicSafe Pro earplugs with special music filters are an open system, so that one has no feeling of isolation.
Compatible with iPod, iPhone and almost all portable music players.
Everything about the DR-05 is designed to get the best quality recordings of your music. A new pair of built-in microphones withstands up to 125dB SPL - the volume of a jet plane from 200 feet away - yet still have the sensitivity to capture every detail of a performance. You can add your own microphone or line-level source through the 1/8" stereo input, including plug-in power for microphones that need it.
Internally, the DR-05's digital and analog circuit boards are built separately to increase noise performance, with a low-impedance design to further decrease hiss. A separate power supply is sent to the A/D and D/A converter for even better audio performance. The result is clean sound quality - over 92dB signal to noise ratio, under 0.05% total harmonic distortion and 20Hz to 40kHz response (-1/+3dB) at 96kHz/24-bit resolution.
The layout of the DR-05 has been revamped to be quick and easy to work with one thumb. Operations like recording, adjusting levels, deleting bad takes and adding markers are just a button press away. Dig deeper to find features like limiting, low cut filtering, a built-in chromatic tuner and more.
One new feature that makes the DR-05 easy to operate is the new Peak Reduction feature. This setting automatically sets your recording level by listening to the input and adjusting for the best level. Unlike Auto Gain settings, this one only goes down to prevent accidental distortion after a period of low level like a break. Peak Recording works in rehearsal mode or in record, so if the performance is louder than the soundcheck you're still safe. Used with the built-in limiter, it's unlikely you'll distort your career-making live recording.
Other classic TASCAM features are included, like Variable Speed Audition to loop and slow down music without changing the pitch - perfect for transcribing or learning new music. A Level Align function can be switched on for playback, to smooth out any sudden volume jumps, and a built-in speaker is also provided. The two AA batteries are enough to power the recorder for 17 1/2 hours, even while recording at CD quality.
For musicians and recordists at any stage of their career, there's no easier way to get great-sounding recordings than Tascam's DR-05.
The "DR-05" is equipped with omnidirectional stereo condenser microphones that can not only record sounds directly in front of the microphones but also record ambient sound from all directions. This is great for capturing the excitement from the audience such as at live events, producing realistic recordings. The recording format is compatible with 24bit/96kHz, which is higher than CD quality.
Proven high sound pressure design that is perfect for loud recordings such as bands or passing trains. It can be used for recoding quiet sound sources such as lectures or for loud sound sources such as rock bands.
The peak reduction function automatically lowers the level when a peak sound is detected and continues recording. The level can be set automatically according to the sound source, so it is easy for anyone to set the optimal level.
The "DR-05" has a total of three different input signal level adjustment functions including a peak reduction function.
The overdubbing function allows for overdub recording while playing a recorded file. This can allow you to record other parts of a musical production such as a guitar solo over a recording made at a rehearsal studio later at home. Overdubbing creates a new file, leaving the original file unaffected, making it easy to rerecord.
Reverb can be added for music demo recordings and overdub recordings to add a more natural resonance. Reverb can also be used during playback, making it possible to express the 'live' feeling at a hall by adding reverb to created music.
Records and pauses automatically. If the input signal level falls below the nominal level for more than 5 seconds during recording, it automatically switches to standby. If the input sound level rises above the nominal level again, recording restarts as a new file. This is useful when you do not want to record unnecessary portions such as lecture intermissions.
If the input signal level falls below the nominal level for more than 5 seconds during recording, it sets a mark when it rises above the nominal level again. This is useful when you want to search for a song position after a recording such as for live recordings. Marks can be used by BWF compatible software.
It also features Korg's class VCF filter for full control over your sounds. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Delay uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.
Create classic sounding analogue tape delays to add warms and new dimensions to your synth sounds. Also included is Korg's fantastic enhanced ribbon controller keyboard, while a mini jack input also allows you to run any external audio, such as a Kaossilator, digital piano or guitar, through the Monotron Duo. As standard, the Monotron range comes with a powerful built-in speakers and is battery operated for the ultimate portable experience.
The Low Frequency Oscillator (LFO) waveform used to modulate the pitch now offers a choice of waveshapes, which is a new square wave plus the traditional triangle wave. Both the rate (speed) and the intensity (depth) can be adjusted independently. In addition, a trimpot on the back panel can continuously adjust the shape/direction of the triangle wave or the pulse-width of the square wave to deliver even more versatility. Used in conjunction with the delay, the LFO can create dazzling effects and provide unique possibilities for embellishing your songs.
The Monotron Delay's ribbon controller keyboard features a wide, 4-octave range. This design allows the pitch to be controlled even more aggressively and dynamically, making the Monotron Delay a great weapon for a DJ to get the floor moving with irresistible sound. The reversed white keys and body adornments glows under black light illumination, making the monotron Delay ideal for delivering a striking visual impact in nearly any club environment.
The input jack (AUX input) built into the Monotron Delay's compact body allow you to place any audio source into the Monotron Delay's signal path, directly before the analog filter and delay circuit. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter and delay effect.
A miniature speaker is built into the Monotron Delay. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Delay's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.
The decks come flat packed and fold together into a simple structure with poseable tone arm and a top which spins as your cat paws at it, meaning you can sit and giggle in a look the cat is doing human things way rather than watch in horror as she shreds your favourite couch into tiny pieces.
No springs, clips or screws required, just place the Mukatsuku disc stabilizer over the spindle and hey presto, you can obtain tighter bass and sweeter treble, as well as improved dynamics/less distortion bringing the record into more intimate contact with the platter.
The Mukatsuku disc stabilizer is great for DJ use in a club environment or when recording from vinyl to digital. It may even possibly help dished records or skipping records. The weight keeps the record tight to the platter and is cut from 10mm carbon steel, and then coated in a black plastic powder paint finish with a red felt underside. Weight is approx 370 grams. Comes with signed insert ,info sheet and stickers
1 in stock $245.49
The Traktor Scratch A6 is designed for DJs who need rock-solid performance, amazing audio quality and incredible ease of use.The included Traktor PRO 2.5 software with Remix Decks allows for a new level of creativity, seamlessly merge the worlds of DJing and live performance. Powered by the Traktor Audio 6 interface, you can also expand your setup to include the Traktor Kontrol F1 for ultimate and intuitive control over the software's Remix Decks.
Get ready to unleash the full sonic potential of your tracks thanks to the included Traktor Audio 6, the high-gain audio interface for DJs who demand premium sound quality and extra-loud output. With 6 inputs and 6 outputs, the TA6 is destined to be the centerpiece of your live or studio setup. And if you're looking for even more connectivity and a MIDI port (e.g. for MASCHINE sync), check out Traktor Scratch A10.
It's never been easier to spin digital files. Hook up the system in seconds thanks to the plug-and-play hardware and software integration. The software interface features an easy-on-the-eye Essential View, focusing on the important elements. Innovative TruWave colored waveforms let you see your tracks like never before.
With full iTunes integration, iPod compatibility and Crate Flick cover art browsing, selecting your tracks is a cinch. The included SoftSync feature gives you optional help in beat-matching.
The Traktor Scratch A6 offers an advanced selection of creative features for developing and defining your own trademark sound. Super-intuitive looping and cueing functions have been further enhanced with the addition of Remix Decks for integrating loops and one-shot samples into your sets.
Store your favorite loops in the library, along with the included loop content, and open up another dimension in creative DJing, easily remix and re-edit tracks on the fly.
Use the exclusive scratch sounds to spice up your routine and rock the 6 studio-quality effects which, thanks to the additional ins and outs on the audio interface, you can route like an external effects box.
The newly developed Native Scratch technology features Traktor Scratch MK2 timecode vinyl and CD control for the next step in tight timecode performance. Spin super-precise 2 kHz control signal on 120g vinyl, it feels just like your digital track was cut to a 12" and with the innovative vinyl marker stickers you get clear visual reference at all times.
Alternatively, use your CDJs with Traktor MK2 timecode in relative mode, and stay ahead of the competition, with Traktor's loops and hot cues and your CDJs' cue and manual looping functionality, you get the best out of both systems.
Although simple in structure, the analog sound engine has an unmistakable presence with subtle nuances that cannot be reproduced by a digital simulation; it's a great choice for acid house and many other styles of music. The step sequencer distilled from the Electribe is not only visually intuitive; it's also a powerful way to generate "free form" bass loops that will stimulate your inspiration.
A vintage-style analog drum machine from Korgs recently announced Volca series. The Volca Beats includes a 16-step sequencer and 6 x editable analog parts including kick, snare, Hi/Lo toms and open & closed Hi-Hats designed to provide sounds reminiscent of classic 80s drum machines. It also has an additional PCM engine which is said to produce 4 x Lo-Fi percussion sounds including clap, claves, agogo and crash sounds.
There is one-knob-per-function parameter control for crafting each of the six analog sounds including click, snappy, pitch, decay and grain. The PCM sounds have control over pitch and speed. There is also a Level knob allowing volume adjustment of each part.
The 16-step LED-lit sequencer has 8 x memory locations for saving patterns. It includes a recordable stutter function for generating repeated triggers (or drum rolls) and delay effects, an active step feature for quickly adding or removing individual steps, and a step jump function that will instantly play any step. Notes can be entered live as the sequencer is running.
You can also wirelessly synchronise playback of all of the units in the Volca series with any iOS music app that support Korg's Wireless Sync-Start Technology (WIST) using their SyncKontrol iPhone app. This also allows control of the swing settings and fine control of the tempo (including tap tempo).
The Volca Beats is battery powered (with optional AC power) and includes a built-in speaker. It weighs in at only 372g with dimensions of 193 × 115 × 45 mm (W x D x H).
The Volca Beats editable controls include:
Kick (click, pitch, decay, level)
Snare (snappy, pitch, decay, level)
Hi/Lo toms (hi picth, low pitch, decay, level)
Open/closed Hi-Hat (closed decay, open decay, level)
PCM sounds (pitch, speed, level).
More than 10 in stock $41.81
The LPD8 laptop pad controller is a USB-MIDI controller for musicians, producers, DJs and other music creators. It measures less than 13" across and weighs less than a pound to easily fit into a laptop case, backpack or messenger bag for extreme portability.
The LPD8 is based on Akai Professional's MPC line of iconic music production stations. Producers who love the feel of the MPC and want to work with software on their computer will find that the LPD8 gives their laptop the controls they prefer over a mouse and keyboard.
The LPD8 has 8 orange light-up pads that are velocity sensitive for programming rhythmic or melodic parts. The pads can also send program-change information to software. Additionally, the LPD8 has eight assignable Q-Link knobs you can assign to virtually any parameters in their software for hands-on control.
The LPD8 works plug and play with Mac and PC and requires no software driver installation or wall power for operation. It has 4 memory banks for programming and recalling settings appropriate to different software programs you use.
Make music in any setting with the LPD8.
MPK mini includes all the essentials for quickly laying down and expanding upon your musical ideas. Dedicated Octave Up and Down buttons increase the keyboard to the full melodic range, and a sustain pedal input is built in for expressive playing and recording. An onboard arpeggiator with adjustable resolution, range, and modes makes it easy to create intricate melodic lines with little effort. Plus, MPC Note Repeat and Full Level allow users to access genuine technologies from Akai Professional's line of MPC workstations.
For maximum portability, MPK mini requires no software drivers or external power adapter for operation. It supports plug-and-play connectivity, features USB-MIDI, and powers up with a single USB connection to your Mac or PC. Four memory banks enable you to store hardware/software presets for quick and easy setting up of your computer and MPK mini.
MPK mini comes bundled with professional production software and virtual instruments for immediate music creation. Hybrid 3, by AIR Music Tech, is a high-definition synthesizer that can create anything from fat, retro synth sounds to edgy modern leads and everything in between. SONiVOX's Wobble is an electronic music grime synthesizer that features two independent channels of spectral morphing synthesis with harmonic controls, individual filtering, and discrete LFO controls. MPC Essentials, a groove/beat production and sample-triggering software, lets producers and musicians incorporate genuine MPC workflow into their DAW of choice and extends the power of MPK mini by adding up to 8 pad banks and 4 samples and insert effects per pad. MPC Essentials also runs in standalone mode, so you can start making music without a DAW.
Unlock the true potential of your MPK mini with the MPK mini MIDI Editor software. This MIDI editor is a powerful preset management software that lets MPK Mini users customize their hardware and software setup on their Mac or PC. Create and tweak presets for your favorite virtual instruments, plugins, and DAWs, then store them on your MPK mini. You'll spend less time setting up your gear and more time doing what you love - making great music.
The Volca Keys is a long awaited synthesizer that adds a new chapter to the long and storied history of Korg's analog synthesizers. This 27 key analog lead synth delivers unbelievably powerful sound in a compact body. Starting with a filter section that uses the circuitry of the legendary miniKORG700S (1974), it delivers astonishing sound that takes full advantage of Korg's half-century of know-how in circuit design.
With a simple structure that includes delay effect and a sequencer, it's also an ideal choice for a first analog synth. It offers the richly expressive sounds that are distinctive of analog, providing the enjoyment of simple yet deep sound-creation. The possibilities are endless; you can use the three oscillators to play chords, use them in unison with detune to produce solid lead lines, or apply ring modulation to create far-out metallic sounds.
The Voicing function makes it easy to specify how the three oscillators will be combined. Choose between poly, unison, octave, fifth, unison ring or poly ring simply by turning a dial. Easy for those taking thier first steps into synthesisers, the Volca's simple design makes it easy to obtain a wide variety of sounds.
Record phrases as you play them with the Volca Keys using the loop sequencer. With up to 16 steps, it's easy to create phrases as they come to mind. Use the overdub recording function to produce complex loops, with up to 8 sequence patterns able to be stored in internal memory. Craft your loops with the motion seqence function, apply time varying changes to your sound to enhance loops and add originality to your life performances.
Skip a step during sequence playback with active step, a function that creates effects similar to a short loop or unexpectedly irregular rhythms. This allows you to create a dynamic performance just as though you were performing the sequence itself. Flux function lets you play back the phrase without quantizing the steps, producing a loop with a distinctive sense of groove.
A useful self-tuning function constantly tunes the oscillators, so you never need to tune during a performance or wait for the pitch to stabilise after turning the power on.
Connect the Volca Keys with the rest of the Volca Series or a Monotribe using the sync jack. A MIDI in connector lets you synchronise with other devices, play the Volca from any MIDI keyboard and send note messages from your DAW.
The Volca Keys analogue loop synth has a compact size and a built-in speaker, easily playable anytime, anywhere. The ideal starter-synth.
Carry case included.
Pocket operators are cleverly designed on a single circuit board. By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.
Experience a fresh new way to create music using your thumbs. With its pocket size, its animated graphics, real synthesizer engines, sync, punch-in effects, built-in speaker, alarm clock and impossibly low price, making electronic music has never been this much fun!
The Keyboard players who want to work with software on their computer will find that the LPK25 gives their laptop the keys they need to express themselves anywhere. The LPK25 is a scaled-down relative to the MPK series of keyboard performance controllers. The diminutive keyboard is made up of 25 miniature, velocity-sensitive keyboard keys with synth action. The LPK25 contains an arpeggiator, which steps through chords automatically, assisting musicians with creating quick melodic ideas. Sustain, octave up and down and tap tempo controls round out the LPK25's easy-to-learn layout. The LPK25 works plug and play with Mac and PC and requires no software driver installation or wall power for operation. It has four memory banks for programming and recalling settings appropriate to different software programs you use.
When out and about, you really need to block as much ambient noise out as possible and a lot of headphones do this by clamping the ear-pads as tightly to your ears as possible and using materials that absorb a lot of sound. This produces two unwanted issues; discomfort, after prolonged use; and a loss of audio quality as sound being generated by the driver is absorbed by the cup. The DT 700 Pro series avoids this by using a clever bass reflex system and a large circumaural cup design with velour pads. Of course the real technology is in the transducer itself, which produces a nominal frequency response of 5Hz to 35kHz and a nominal SPL of 96dB, an exceptional performance.
3 in stock $16.08
The Native Instruments Traktor Scratch Control Vinyl MK2 is designed for use with Native Instruments Traktor Scratch. It also works with Traktor Scratch Pro. Native Scratch's new MK2 timecode is compatible with all next generation Traktor Scratch products when using the free Traktor 2.1.1 service update.
Genre-defining sounds and classic effects. Unprecedented live pattern manipulation. Solid, intuitive performance controls.
It's the TR...
With the TR-8, Roland have obsessively analysed and faithfully re-created every detail and nuance of the analogue circuitry of these legendary rhythm machines. The boom and snap of the 808. The thud of the 909. The robotic click of an 808 rim shot or a classic 909 snare roll. It's all here.
Not content with mere recreations however, Roland have enhanced these classic instruments with capabilities far beyond the original units.
Tune and Decay knobs are now present on every instrument and the Bass and Snare drum modules have dedicated "Attack" and "Comp" knobs allowing for a great variety of tones - from subtle ambient percussion to pounding dance grooves. Per-step effects and the massively addictive "Scatter" function take things into entirely new territory.
With the authentic tone and character of the original units and with new sound tweaking capabilities inspired by legions of users, the TR-8 breathes new life into the sounds we all know and love.
Make no mistake - the TR-8 is an instrument, carefully designed from the ground-up, to be played. Every control has a solid, predictable feel with each drum instrument having robust, "playable" faders. Numerous lighted knobs and RGB-lit buttons give realtime performance feedback and a striking appearance on stage.
Pattern creation is creative and intuitive using an evolved version of the TR-REC method which originated in the TR-808 and eventually became the standard for electronic rhythm programming. Based on detailed analysis of the original TR-808, the TR-REC behaviour has been faithfully modelled in the TR-8. But the TR-8 goes well beyond the original, allowing you to seamlessly switch between programming and performance modes and to introduce lots of groovy rhythmic variations - from subtle snare fills to total glitch meltdowns.
Scatter is a unique performance function that gives you detailed realtime control over variations in your patterns and any incoming external input signal.
Scatter can reverse, glitch, gate, truncate, stutter and perform all manner of rhythmic variations - from subtle to extreme - and all in perfect sync.
Pick from 10 different types of Scatter and smoothly adjust the intensity or "Scatter Depth" with the large comfortable dial.
Seamlessly switch between Scatter patterns and quickly turn Scatter on and off for cool variations when and where you want them.
You can connect the TR-8 to your computer via its USB jack to send and receive Audio and MIDI data. The TR-8 can receive MIDI clock information to sync with external devices including other AIRA series units. The TR-8 is designed to work seamlessly and look great with other products in the AIRA series.
Product demo video:
The stereo channels on the stereo female mini jack are combined to a single mono signal on the full-sized male mono jack. It is ideal for plugging mini jack cables from a stereo source (iPod, MP3, portable CD, laptop/notebook/desktop PC, Apple Mac etc) into equipment expecting a mono input (amps, mixing desk, in-ear monitors/earphones etc).
The socket is used to connect cables and plug headphones, microphones, speakers fitted with cables terminated in 3.5mm mini jack plugs into equipment with full size 6.3mm (1/4") jack sockets.
The materials used, the design of the new reinforced fivefold glued bottom board and extra strong front stand, are all tested to ensure the highest strength possible and guarantee the best stability and long life.
Engineered to create a comfortable listening environment in areas with high ambient noise, these in-ear headphones feature a miniature microphone in each earpiece that picks up ambient noise (such as traffic, air-handling systems, etc.). Electronics in the QuietPoint control module create a noise cancelling wave that is 180- out of phase with the ambient noise. This wave acts like a noise eraser: it cancels out the annoying sounds that surround you without diminishing the audio you want to hear. The result...a peaceful enclave to enjoy the music or movies of your choice.
The ATH-ANC33iS in-ear headphones also feature an inline microphone and controller for answering calls and controlling music. The mic and controller support smartphones, iPhones, iPads, many iPods & other compatible devices. The microphone has an omnidirectional pickup pattern and it is designed for crisp intelligibility, so your voice will be clearly transmitted without having to speak directly into the mic.
Serato DJ is a robust program for digital DJ'ing. AMX comes with the full-version, letting you take advantage of precise, powerful audio manipulation in real-time. Already have Serato DJ? AMX unlocks it, providing both a control surface and audio interface to build around or have as an extra controller option. Utilizing Akai Pro's expertise in hardware innovation and sound manipulation mastery, the line between the physical and digital DJ world is extinct.
AMX features two sets of audio inputs, selectable as Line or Phono, to accept signals from Serato timecode vinyl, also known as Serato NoiseMap. This Digital Vinyl System (DVS) lets you DJ with your digital music collection, while maintaining the feel and action of a turntable+vinyl setup. AMX accepts the Serato NoiseMap signal from your turntables and instantly sends it Serato DJ over a USB connection. Until now, similar systems were complex and cost-prohibitive. AMX is a rock-solid, affordable interface that fuses the best of analog feel with the best of digital music access. (Serato DVS Expansion Pack and timecode vinyl are sold separately)
AMX features the renowned innoFADER mini crossfader at the heart of its mixing surface. Coveted for its uncanny response, smooth action, and impossibly-durable build quality, the innoFADER gives DJs of all types unmatched command over transitions and cuts. With a fully-adjustable curve response, the innoFADER mini can be calibrated for turntablists, electronic music DJ's, scratch/battle performers - AMX even includes a fader reverse switch - that can be worked hard, night in and night out.
By themselves, the EQ and Filter knobs on AMX are tactile, responsive controls for shaping tracks and carving out transitions. These knobs also incorporate a dramatic "twist" they react to the human touch. In Touch mode, each knob responds to a twist, a touch, or a combination of both. With a simple tap, you can kill an entire frequency band (or two, or three). Remove your finger and the missing bands become audible again, instantly. With Touch mode disengaged, they function as traditional mixer-style knobs for precision control over each decks' sonic composition.
AMX packs professional functionality into a compact form-factor - take it everywhere. In addition to transport and mixing controls, it features a studio-grade audio interface. Get the mix from your computer to an amplification system with support for 24-bit, 96kHz audio output. As the center of your DVS setup, or as a compact travel-friendly controller, AMX brings the best of the studio to the stage in a way that only Akai Professional can.
Lightweight and mobile, Keystation Mini 32 is perfect for traveling musicians who want to take command of music software during live performances, or producers who wish to add an intuitive MIDI controller with a small footprint to their studio. For an easy-to-use and portable setup, Keystation Mini 32 is USB-powered, class-compliant, and supports USB-MIDI connectivity. Plus, Keystation Mini 32 supports iOS connectivity with the Apple iPad Camera Connection Kit (sold separately), enabling you to perform and compose with audio apps on your iPad and other iOS devices.
Bundled with Keystation Mini 32 is AIR Music Technology's Ignite software. With this intuitive music creation platform, you can capture your ideas quickly with professional results. Individual musical ideas are captured as phrases, simply called "clips." Multiple clips can be played back together, or even grouped to create more complex phrases and song sections. Ignite provides seamless integration with any current M-Audio keyboard controller, including Keystation Mini 32. Once connected to your computer, the key parameters will be automatically assigned, or mapped, to the front panel controllers. This tight integration provides an out-of-the-box solution that simply worksiwith no additional setup to perform.
Included with Ignite are over 275 remarkable instrument sounds developed by AIR Music Technology. In addition to a versatile arpeggiator, Smart MIDI technology provides both a Chord Player and a Phrase Player that can introduce new musical parts to enhance your production - even a drum pattern. Email your ideas to the rest of the band. Share your musical ideas and songs with other musicians through SoundCloudiall without ever leaving Ignite. Plus, you can export WAV and MIDI files, and then import them into any DAW recording software.
Also included with Keystation Mini 32 is Ableton Live Lite - one of the most popular performance and production programs available in the world. A powerful music creation tool, Ableton Live Lite enables you to spontaneously compose, record, remix, improvise and edit musical ideas in a fluid audio/MIDI environment. Explore sonic possibilities in real time whether on stage or in the studio. Keystation Mini 32 can interface with Ableton Live to extend performance and production capabilities. When you are satisfied with your work, Ableton Live Lite lets you save it or mix it down.
4 in stock $16.08
The Native Instruments Traktor Scratch Control Vinyl MK2 is designed for use with Native Instruments Traktor Scratch. It also works with Traktor Scratch Pro. Native Scratch's new MK2 timecode is compatible with all next generation Traktor Scratch products when using the free Traktor 2.1.1 service update.
The K2 is designed to work with all MIDI-enabled DAW applications and interface with popular DJ software packages, such as Ableton, Traktor Pro and Serato Scratch Live. It has 52 physical controls, including 12 analogue and 6 endless rotary encoders with push switch, 4 linear faders, and 30 back lit performances switches, providing up to 171 MIDI control commands across 3 layers. The K2's MIDI interface can be configured by the user, so the unit can be left in Open Architecture (Latching Layers off) Mode or set to Latching Layers Mode.
The K2 has an internal 4-channel high quality soundcard, that can operate at 44.1/48 kHz, and all channels run from the PC to the unit, configured to provide 2 stereo channels, one for headphones one for master out L and R, allowing headphone cueing without interrupting the master out. There is also a dedicated 3.5mm headphone jack and a master out on RCA phono connectors.
It is possible to link 2 K2 units together to double the control area using Allen & Heath's proprietary X:Link protocol. The X:Link uses a standard RJ45 connector and distributes power and data, which means 2 units can be connected to your DAW using only one USB port.
The Xone:K2 is constructed with a strong plastic base and steel front panel employing A&H's nutted pot construction to be both lightweight and hard-wearing. Finally, the K2 comes with a carry case that doubles as a stand for ease of use for travelling DJs.
KRK's Rokit 5 G3 (Generation 3) powered studio monitors offer professional performance and accuracy for recording, mixing, mastering and playback. The system consists of a 1" soft dome tweeter and 5" glass aramid composite woofer. It delivers high frequencies up to 35KHz, vocal clarity and extended bass response. The proprietary bi-amped, class A/B amplifier grants SPL up to 106dB. The Rokit waveguide is designed to ensure detailed imaging in the listening position. The front-firing bass port reduces boundary coupling to allow flexible positioning in the room while the engineered surface reduces diffraction distortion. Multiple input connections ensure the Rokit 5 G3 will easily integrate in any system configuration.
As one of the most used Studio monitors in the world, the Rokit 5 is a high valuable and compact solution towards an accurate mix.
The Novation Dicer has 5 dice pads which can be used to set and trigger Serato's hot cues, auto loop and loop roll functions, with multicoloured LEDs behind each pad to show what mode you are in. There are also freely assignable layers of controls which allow you to control whatever you want, including triggering samples, effects or even navigating through track libraries and crates. When using other software, a pair of Dicers allow up to 60 MIDI controls between them.
The Novation Dicer ships with a mounting which enables it to sit firmly in the 45" adapter hole of a Technics 1200/1210 (and other compatible turntables). The box also contains DJ Putty which sticks the units firmly to any flat surface including CDJs, mixers or laptops at any angle.
The Dicer works straight out of the box with no driver-installation or set-up required. They ship in pairs and require only one usb socket for power, the second Dicer links to the first by means of a (supplied) mini-jack cable for the simplest of set-ups.
The iLok is a special USB device that holds your licenses for iLok-enabled software. Software publishers use the iLok to provide secure protection for their software. When you run their iLok-enabled software, it looks for the software license on your attached iLok.
The Third Generation iLok:
Smaller, faster, and with even greater capacity, the new iLok is here! The Third Generation iLok is fully compatible with software created for the second generation iLok. With its smaller form factor and metal body, it is more robust and less prone to casual damage.
- It's portable - you can authorize your software anywhere it is installed. At home, work, or at a remote location, you can keep your software licenses with you, not on your computer.
- It's convenient and cross-platform - Store your Mac and Windows iLok-enabled software licenses all on a single iLok. A Third Generation iLok can hold over 1500 licenses.
- Worry Free - Your licenses are on the safest, most secure solution: the iLok. With Zero Downtime protection available, you've got 24/7 peace of mind.
Managing your licenses has never been so easy. Using the iLok License Manager application, you can:
- View what is on your iLok(s)
- Download new licenses from participating software publishers
- Manage your licenses, including moving them between iLoks within your account and from your iLoks back to your account
- Transfer licenses to other iLok.com accounts
What do I need in order to use my iLok?
In order to use an iLok, you'll need at least 3 things:
- Your iLok
- A license for the iLok-protected software you want to run (you'll need to have the publisher place this license in your account or send you an Activation code)
- The software that is iLok protected (usually a download from the Publisher's or retailer's website, we do not host those on this site)
Your iLok will need special License Support software in order to talk to the protected software. Your protected software most likely installed this special software, but you can always get the latest version of this software by installing the iLok License Manager.
A good quality Euro style album record case. The product features lift off hinges and a butterfly catch. Holds 70 12" records.
More than 10 in stock $1.92
The Monotron Duo features Korg's fantastic enhanced ribbon controller keyboard and now features the same scale function as used on the Kaossilator, chromatic, major, minor or off scales are available, allowing your music juices to flow freely over any music. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Duo uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.
The input jack (AUX input) built into the Monotron Duo's compact body allow you to place any audio source into the Monotron Duo's signal path, directly before the analog filter. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter effects.
A miniature speaker is built into the Monotron Duo. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Duo's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.